Commission Regulation (EU) No 1089/2010 of 23 November 2010 implementing Directive 2007/2/EC of the European Parliament and of the Council as regards interoperability of spatial data sets and services

Attribute	Definition	Type	Voidability
classificationMethodUsed	Means of calculating the measurement.	ClassificationMethodUsedValue
date	Date of calculated or estimated value.	TM_GeometricPrimitive
dimension	Size of the body used in the calculation.	EarthResourceDimension	voidable
ore	Amount of ore.	QuantityRange
proposedExtractionMethod	The method proposed to extract the commodity.	Category	voidable
sourceReference	The reference for the OreMeasure values.	DocumentCitation

Association roles of the data type OreMeasure

Association role	Definition	Type	Voidability
measureDetails	A measure of the amount of each commodity, based on a reserve, resource or endowment calculation.	CommodityMeasure

20.3.2.7.   Reserve (Reserve)

The economically mineable part of a Measured and/or Indicated Mineral Resource.

This type is a sub-type of OreMeasure.

Attributes of the data type Reserve

Attribute	Definition	Type	Voidability
category	The level of confidence of the estimate.	ReserveCategoryValue

20.3.2.8.   Resource (Resource)

An accumulation of material of intrinsic economic interest in or on the Earth’s crust in such form, quality and quantity that there are reasonable prospects for economic extraction.

This type is a sub-type of OreMeasure.

Attributes of the data type Resource

Attribute	Definition	Type	Voidability
category	Indication of whether the resource is measured, indicated or inferred.	ResourceCategoryValue
includesReserves	A flag indicating whether the estimate of resources includes reserve values.	Boolean	voidable

20.3.3.   Code Lists

20.3.3.1.   Classification Method Used (ClassificationMethodUsedValue)

Codes indicating the means used to calculate the ore measurement.

20.3.3.2.   Commodity Code (CommodityCodeValue)

Values indicating the type of commodity.

20.3.3.3.   Enduse Potential (EndusePotentialValue)

Values indicating the end-use potential of the mineral.

20.3.3.4.   Exploration Activity Type (ExplorationActivityTypeValue)

Types of exploration activity carried out.

20.3.3.5.   Exploration Result (ExplorationResultValue)

Values indicating the result of the exploration activity.

20.3.3.6.   Importance (ImportanceValue)

Values indicating the importance of the commodity for the Earth Resource.

20.3.3.7.   Mine Status (MineStatusValue)

Values indicating the operational status of the mine.

20.3.3.8.   Mineral Deposit Group (MineralDepositGroupValue)

Values indicating the grouping of mineral deposits on the basis of their generic characteristics.

20.3.3.9.   Mineral Deposit Type (MineralDepositTypeValue)

Values indicating the style of mineral occurrence or deposit.

20.3.3.10.   Mineral Occurrence Type (MineralOccurrenceTypeValue)

The type of mineral occurrence.

20.3.3.11.   Mining Activity Type (MiningActivityTypeValue)

The type of mining activity, processing activity, or production.

20.3.3.12.   Processing Activity Type (ProcessingActivityTypeValue)

Values indicating the type of processing carried out during a mining activity.

20.3.3.13.   Reserve Category (ReserveCategoryValue)

The level of confidence of the estimate of the reserve.

20.3.3.14.   Resource Category (ResourceCategoryValue)

Indication whether the resource is measured, indicated or inferred.

20.4.   Theme-specific Requirements

The type MappedFeature specified in Section 4.2.1.10 of Annex III shall be used to describe the geometric properties of MineralOccurrence spatial objects.

20.5.   Layers

Layers for the spatial data theme Mineral Resources

Layer Name	Layer Title	Spatial object type
MR.Mine	Mines	MiningFeatureOccurrence
MR.MineralOccurrence	Mineral Occurrences	MappedFeature (spatial objects whose specification property is of type MineralOccurrence)

ANNEX V

IMPLEMENTING RULES FOR INVOCABLE SPATIAL DATA SERVICES

PART A

Writing Conventions

Similar to the Regulation (EC) No 1205/2008, the following writing conventions are used for the spatial data service metadata.

Where specified in the description of the metadata elements, the value domains shall be used with the multiplicity expressed in the relevant tables. In relation to a particular domain, each value is defined by:

• — a numerical identifier,

• — a textual name for humans which may be translated in the different Community languages,

• — a language neutral name for computers (the value expressed between parenthesis),

• — an optional description or definition.

The table present the following information:

• — the first column contains the reference to the paragraph in the Annex defining the metadata element or group of metadata elements,

• — the second column contains the name of the metadata element or group of metadata elements,

• — the third column specifies the multiplicity of a metadata element. The expression of the multiplicity follows the unified modelling language (UML) notation for multiplicity, in which: — N means that there shall be only N instances of this metadata element in a result set, — 1.. means that there shall be at least one instance of this element in a result set, — 0..1 indicates that the presence of the metadata element in a result set is conditional but can occur only once, — 0.. indicates that the presence of the metadata element in a result set is conditional but the metadata element may occur once or more, — when the multiplicity is 0..1 or 0..*, the condition defines when the metadata elements is mandated.

• — the fourth column contains a conditional statement if the multiplicity of the element does not apply to all types of resources. All elements are mandatory in other circumstances.

PART B

Category Metadata Element

1. Category

This is a citation of the status of the spatial data service versus invocability.

The value domain of this metadata element is as follows:

1.1.   Invocable (invocable)

The spatial data service is an invocable spatial data service.

1.2.   Interoperable (interoperable)

The invocable spatial data service is an interoperable spatial data service.

1.3.   Harmonised (harmonised)

The interoperable spatial data service is a harmonised spatial data service.

PART C

Instructions on Multiplicity and Conditions of the Metadata Elements

The new metadata describing the spatial data service shall comprise the metadata elements or groups of metadata elements listed in Table 1.

Those metadata elements or groups of metadata elements shall be in accordance with the expected multiplicity and the related conditions set out in Table 1.

When no condition is expressed in relation to a particular metadata element, that element shall be mandatory.

Table 1

Metadata for invocable spatial data services

Reference	New metadata elements	Multiplicity	Condition
1	Category	0..1	mandatory for an invocable spatial data service

PART D

Additional Requirements on Metadata Set Out in Regulation (EC) No 1205/2008

1. Resource Locator

The Resource Locator metadata element set out in Regulation (EC) No 1205/2008 shall also contain all access points from the spatial data service provider and these access points shall be unambiguously identified as such.

2. Specification

The Specification metadata element set out in Regulation (EC) No 1205/2008 shall also refer to or contain technical specifications (such as INSPIRE technical guidance but not only), to which the invocable spatial data service fully conforms, providing all the necessary technical elements (human, and wherever relevant, machine readable) to allow its invocation.

ANNEX VI

IMPLEMENTING RULES FOR THE INTEROPERABILITY OF INVOCABLE SPATIAL DATA SERVICES

PART A

Additional Requirements on Metadata Set Out in Regulation (EC) No 1205/2008

1. Conditions applying to access and use

The technical restrictions applying to the access and use of the spatial data service shall be documented in the metadata element ‘CONSTRAINT RELATED TO ACCESS AND USE’ set out in Regulation (EC) No 1205/2008.

2. Responsible party

The responsible party set out in Regulation (EC) No 1205/2008 shall at least describe the custodian responsible organisation, corresponding to the Custodian responsible party role set out in Regulation (EC) No 1205/2008.

PART B

Metadata Elements

3. Coordinate Reference System Identifier

Where appropriate, this is the list of coordinate reference systems supported by the spatial data service.

Each supported coordinate reference system shall be expressed using an identifier.

4. Quality of Service

This is the minimum quality of service estimated by the spatial data service responsible party and expected to be valid over a period of time.

4.1.   Criteria

These are the criteria to which the measurements refer.

The value domain of this metadata element is as follows:

4.1.1.   Availability (availability)

It describes the percentage of time the service is available.

4.1.2.   Performance (performance)

It describes how fast a request to the spatial data service can be completed.

4.1.3.   Capacity (capacity)

It describes the maximum number of simultaneous requests that can be completed with the declared performance.

4.2.   Measurement

4.2.1.   Description

It describes the measurement for each criterion.

The value domain of this metadata element is free text.

4.2.2.   Value (value)

It describes the value of the measurement for each criterion.

The value domain of this metadata element is free text.

4.2.3.   Unit (unit)

It describes the Unit of the measurement for each criterion.

The value domain of this metadata element is free text.

PART C

Instructions on Multiplicity and Conditions of the Metadata Elements

The metadata describing an interoperable spatial data service shall comprise the metadata elements or groups of metadata elements listed in Table 1.

Those metadata elements or groups of metadata elements shall be in accordance with the expected multiplicity and the related conditions set out in Table 1.

When no condition is expressed in relation to a particular metadata element, that element shall be mandatory.

Table 1

Metadata for interoperable spatial data services

Reference	New metadata elements	Multiplicity	Condition
1	Coordinate reference system identifier	1..*	Mandatory if relevant
2	Quality of service	3..*

ANNEX VII

IMPLEMENTING RULES FOR THE HARMONISATION OF INTEROPERABLE SPATIAL DATA SERVICES

PART A

Characteristics

1. Quality of Service

The probability of a harmonised spatial data service to be available shall be 98 % of the time.

2. Output encoding

A harmonised spatial data service returning spatial objects in the scope of the Directive 2007/2/EC shall encode those spatial objects according to this regulation.

PART B

Metadata Elements

3. invocation metadata

The invocation metadata element documents the interfaces of the harmonised spatial data service and lists the end points to enable machine-to machine communication.

PART C

Instructions on Multiplicity and Conditions of the Metadata Elements

The harmonised spatial data service metadata shall comprise the metadata element or group of metadata elements listed in Table 1.

This metadata element or group of metadata elements shall be in accordance with the expected multiplicity and the related conditions set out in Table 1.

When no condition is expressed in relation to a particular metadata element, that element shall be mandatory.

Table 1

Metadata for harmonised spatial data services

Reference	New metadata elements	Multiplicity	Condition
1	invocation metadata	1..*

PART D

Operations

1. List of operations

A harmonised spatial data service shall provide the operation listed in table 2.

Table 2

Operations for Harmonised Spatial Data Services

Operation	Role
Get Harmonised Spatial Data Service Metadata	Provides all necessary information about the service and describes service capabilities

2. Get Harmonised Spatial Data Service Metadata Operation

2.1.   Get Harmonised Spatial Data Service Metadata Request

2.1.1.   Get Harmonised Spatial Data Service Metadata Request parameters

The Get Harmonised Spatial Data Service Metadata Request parameter indicates the natural language for the content of the Get Harmonised Spatial Data Service Metadata Response

2.2.   Get Harmonised Spatial Data Service Metadata Response

The Get Harmonised Spatial Data Service Metadata Response shall contain the following sets of parameters:

• — Harmonised Spatial Data Service Metadata,

• — Operations Metadata,

• — Languages.

2.2.1.   Harmonised Spatial Data Service Metadata parameters

The Harmonised Spatial Data Service Metadata parameters shall at least contain the INSPIRE metadata elements of the Harmonised Spatial Data Service set out in this Regulation, and in Regulation (EC) No 1205/2008.

2.2.2.   Operations Metadata parameters

The Operations Metadata parameter provides metadata about the operations of the Harmonised Spatial Data Service. It shall at least describe each operation, including as a minimum a description of the data exchanged and the network address.

2.2.3.   Languages parameter

Two language parameters shall be provided:

• — the Response Language parameter indicating the natural language used in the Get Harmonised Spatial Data Service Metadata Response parameters,

• — the Supported Languages parameter containing the list of the natural languages supported by the Harmonised Spatial Data Service.

[^E0001]: Commission Regulation (EC) No 976/2009 of 19 October 2009 implementing Directive 2007/2/EC of the European Parliament and of the Council as regards the Network Services (OJ L 274, 20.10.2009, p. 9).

[^E0002]: Commission Regulation (EC) No 1205/2008 of 3 December 2008 implementing Directive 2007/2/EC of the European Parliament and of the Council as regards metadata (OJ L 326, 4.12.2008, p. 12)

[^E0003]: OJ L 326, 4.12.2008, p. 12.

[^E0004]: OJ L 274, 20.10.2009, p. 9.

[^E0005]: OJ L 393, 30.12.2006, p. 1.

[^E0006]: OJ L 393, 30.12.2006, p. 1.

[^E0007]: OJ L 332, 9.12.2002, p. 1.

[^E0008]: OJ L 312, 22.11.2008, p. 3.

[^E0009]: OJ L 145, 4.6.2008, p. 65.

[^E0010]: OJ L 226, 6.9.2000, p. 3.

[^E0012]: Council Directive 92/43/EEC of 21 May 1992 on the conservation of natural habitats and of wild fauna and flora (OJ L 206, 22.7.1992, p. 7).

[^E0021]: Commission Regulation (EC) No 166/2006 of 18 January 2006 concerning the establishment of a European Pollutant Release and Transfer Register and amending Council Directives 91/689/EEC and 96/61/EC (OJ L 33, 4.2.2006, p. 1).

[^E0022]: Directive 2010/75/EU of the European Parliament and of the Council of 24 November 2010 on industrial emissions (integrated pollution prevention and control) (OJ L 334, 17.12.2010, p. 17).

[^E0027]: Directive 2008/56/EC of the European Parliament and of the Council of 17 June 2008 establishing a framework for community action in the field of marine environmental policy (Marine Strategy Framework Directive) (OJ L 164, 25.6.2008, p. 19).

[^E0028]: Commission Implementing Decision 2011/484/EU of 11 July 2011 concerning a site information format for Natura 2000 sites (OJ L 198, 30.7.2011, p. 39).

[^E0030]: OJ L 140, 5.6.2009, p. 16.