Commission Implementing Regulation (EU) No 445/2013 of 14 May 2013 concerning the authorisation of hydroxy-analogue of selenomethionine as a feed additive for all animal species Text with EEA relevance

Type Implementing Regulation
Publication 2013-05-15
State In force
Text As published
Department European Commission
Source EUR-Lex
articles 2

This is the act as published. Later amendments are not folded into the text below: each one is a separate act in this repository and an entry in this law's history.

Reform history JSON API
15.5.2013 EN Official Journal of the European Union L 130/21

THE EUROPEAN COMMISSION,

Having regard to the Treaty on the Functioning of the European Union,

Having regard to Regulation (EC) No 1831/2003 of the European Parliament and of the Council of 22 September 2003 on additives for use in animal nutrition [^ntr1-L_2013130EN.01002101-E0001], and in particular Article 9(2) thereof,

Whereas:

HAS ADOPTED THIS REGULATION:

Article 1

The preparation specified in the Annex, belonging to the additive category ‘nutritional additives’ and to the functional group ‘compounds of trace elements’, is authorised as an additive in animal nutrition, subject to the conditions laid down in that Annex.

Article 2

This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.

This Regulation shall be binding in its entirety and directly applicable in all Member States.

Done at Brussels, 14 May 2013.

For the Commission

The President

José Manuel BARROSO

[^ntr1-L_2013130EN.01002101-E0001]: OJ L 268, 18.10.2003, p. 29.

[^ntr2-L_2013130EN.01002101-E0002]: EFSA Journal 2013; 11(1):3046.

ANNEX

Identification number of the additive Name of the holder of authorisation Additive Composition, chemical formula, description, analytical method Species or category of animal Maximum age Minimum content Maximum content Other provisions End of period of authorisation
Identification number of the additive Name of the holder of authorisation Additive Composition, chemical formula, description, analytical method Species or category of animal Maximum age Content of element (Se) in mg/kg of complete feed with a moisture content of 12 % Content of element (Se) in mg/kg of complete feed with a moisture content of 12 % Other provisions End of period of authorisation
Category of nutritional additives. Functional group: compounds of trace elements Category of nutritional additives. Functional group: compounds of trace elements Category of nutritional additives. Functional group: compounds of trace elements Category of nutritional additives. Functional group: compounds of trace elements Category of nutritional additives. Functional group: compounds of trace elements Category of nutritional additives. Functional group: compounds of trace elements Category of nutritional additives. Functional group: compounds of trace elements Category of nutritional additives. Functional group: compounds of trace elements Category of nutritional additives. Functional group: compounds of trace elements Category of nutritional additives. Functional group: compounds of trace elements
3b814 — Hydroxy-analogue of selenomethionine Characterisation of the additive Solid and liquid preparation of Hydroxy-analogue of selenomethionine Content of selenium: 18 000 to 24 000  mg Se/kg Organic selenium > 99 % of total Se Hydroxy-analogue of selenomethionine > 98 % of total Se Solid preparation: 5 % Hydroxy-analogue of selenomethionine and 95 % carrier Liquid preparation: 5 % Hydroxy-analogue of selenomethionine and 95 % distilled water Characterisation of the active substance Organic selenium from hydroxy-analogue of selenomethionine (R,S-2-hydroxy-4-methylselenobutanoic acid) Chemical formula: C5H10O3Se CAS number 873660-49-2 Analytical method [^ntr1-L_2013130EN.01002201-E0001] For the determination of hydroxy analogue of methionine in the feed additive: — High performance liquid chromatography coupled to UV detection at 220 nm (HPLC-UV) For the determination of total selenium in the feed additive: — Inductively coupled plasma mass spectrometry (ICPMS) after microwave digestion with HNO3/H2O2, or — Inductively coupled plasma atomic emission spectrometry (ICPAES) after digestion with HNO3/HCl For the determination of total selenium in premixtures and feed: — Hydride generation atomic absorption spectrometry (HGAAS) after microwave digestion with HNO3/H2O2 (EN 16159:2012) All species — 0,50 (total) 1. The additive shall be incorporated into feed in the form of a premixture. 2. For user safety: breathing protection, safety glasses and gloves should be worn during handling. 3. Maximum supplementation with organic selenium: 0,20 mg Se/kg of complete feed with a moisture content of 12 %. 4 June 2023

[^ntr1-L_2013130EN.01002201-E0001]: Details of the analytical methods are available at the following address of the Reference Laboratory: http://irmm.jrc.ec.europa.eu/EURLs/EURL_feed_additives/authorisation/evaluation_reports/Pages/index.aspx

Reading this document does not replace reading the official text published in the Official Journal of the European Union. We assume no responsibility for any inaccuracies arising from the conversion of the original to this format.

This text is published under EUR-Lex's own terms of reuse, not a Legalize or public-domain licence. EUR-Lex
Creative Commons Attribution 4.0 International (CC BY 4.0)
© European Union, https://eur-lex.europa.eu — Source: EUR-Lex (Publications Office of the European Union). Reused under the Creative Commons Attribution 4.0 International (CC BY 4.0) licence. Only EU legislation published in the printed Official Journal of the European Union is deemed authentic; consolidated texts are reproduced here for documentation purposes and have been reformatted to Markdown.