LegalizeCommission Implementing Regulation (EU) No 92/2014 of 31 January 2014 approving zineb as an existing active substance for use in biocidal products for product-type 21 Text with EEA relevance
This is the act as published. Later amendments are not folded into the text below: each one is a separate act in this repository and an entry in this law's history.
| 1.2.2014 | EN | Official Journal of the European Union | L 32/16 |
THE EUROPEAN COMMISSION,
Having regard to the Treaty on the Functioning of the European Union,
Having regard to Regulation (EU) No 528/2012 of the European Parliament and of the Council of 22 May 2012 concerning the making available on the market and use of biocidal products 1, and in particular the third subparagraph of Article 89(1) thereof,
Whereas:
- (1) Commission Regulation (EC) No 1451/2007 2 establishes a list of active substances to be assessed, with a view to their possible inclusion in Annex I, IA or IB to Directive 98/8/EC of the European Parliament and of the Council 3. That list includes zineb.
- (2) Zineb has been evaluated in accordance with Article 11(2) of Directive 98/8/EC for use in product-type 21, antifouling products, as defined in Annex V to that Directive, which corresponds to product-type 21 as defined in Annex V to Regulation (EU) No 528/2012.
- (3) Ireland was designated as rapporteur Member State and submitted the competent authority report, together with a recommendation, to the Commission on 29 March 2011 in accordance with Article 14(4) and (6) of Regulation (EC) No 1451/2007.
- (4) The competent authority report was reviewed by the Member States and the Commission. In accordance with Article 15(4) of Regulation (EC) No 1451/2007, the findings of the review were incorporated, within the Standing Committee on Biocidal Products on 13 December 2013, in an assessment report.
- (5) It appears from that report that biocidal products used for product-type 21 and containing zineb may be expected to satisfy the requirements laid down in Article 5 of Directive 98/8/EC, provided that the conditions specified in the Annex to this Regulation are satisfied. It is therefore appropriate to approve zineb for use in biocidal products for product-type 21.
- (6) Since the evaluation did not address nanomaterials, the approval should not cover such materials pursuant to Article 4(4) of Regulation (EU) No 528/2012.
- (7) A reasonable period should be allowed to elapse before an active substance is approved, in order to permit Member States, interested parties, and the Commission where appropriate, to prepare themselves to meet the new requirements entailed.
- (8) The measures provided for in this Regulation are in accordance with the opinion of the Standing Committee on Biocidal Products,
HAS ADOPTED THIS REGULATION:
Article 1
Zineb shall be approved as an active substance for use in biocidal products for product-type 21, subject to the specifications and conditions set out in the Annex.
Article 2
This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.
This Regulation shall be binding in its entirety and directly applicable in all Member States.
Done at Brussels, 31 January 2014.
For the Commission
The President
José Manuel BARROSO
Commission Regulation (EC) No 1451/2007 of 4 December 2007 on the second phase of the 10-year work programme referred to in Article 16(2) of Directive 98/8/EC of the European Parliament and of the Council concerning the placing of biocidal products on the market (OJ L 325, 11.12.2007, p. 3).
Directive 98/8/EC of the European Parliament and of the Council of 16 February 1998 concerning the placing of biocidal products on the market (OJ L 123, 24.4.1998, p. 1).
ANNEX
| Common Name | IUPAC Name Identification Numbers | Minimum degree of purity of the active substance4 | Date of approval | Expiry date of approval | Product type | Specific conditions5 |
|---|---|---|---|---|---|---|
| Zineb | IUPAC Name: Zinc ethylenebis(dithiocarbamate) (polymeric) EC No: 235-180-1 CAS No: 12122-67-7 | 940 g/kg | 1 January 2016 | 31 December 2025 | 21 | The product assessment shall pay particular attention to the exposures, the risks and the efficacy linked to any uses covered by an application for authorisation, but not addressed in the Union level risk assessment of the active substance. Persons making products containing zineb available on the market for non-professional users shall make sure that the products are supplied with appropriate gloves. Authorisations are subject to the following conditions: (1) For industrial or professional users, safe operational procedures and appropriate organisational measures shall be established. Where exposure cannot be reduced to an acceptable level by other means, products shall be used with appropriate personal protective equipment. (2) Labels and, where provided, instructions for use shall indicate that children shall be kept away until treated surfaces are dry. (3) Labels and, where provided, safety data sheets of products authorised shall indicate that application, maintenance and repair activities shall be conducted within a contained area, on impermeable hard standing with bunding or on soil covered with an impermeable material to prevent losses and minimise emissions to the environment, and that any losses or waste containing zineb shall be collected for reuse or disposal. (4) For products that may lead to residues in food or feed, the need to set new or to amend existing maximum residue levels (MRLs) in accordance with Regulation (EC) No 470/2009 of the European Parliament and of the Council6 or Regulation (EC) No 396/2005 of the European Parliament and of the Council7 shall be verified, and any appropriate risk mitigation measures shall be taken to ensure that the applicable MRLs are not exceeded. Where a treated article has been treated with or intentionally incorporates zineb, and where necessary due to the possibility of skin contact as well as the release of zineb under normal conditions of use, the person responsible for placing the treated article on the market shall ensure that the label provides information on the risk of skin sensitisation, as well as the information referred to in the second subparagraph of Article 58(3) of Regulation (EU) No 528/2012. |
The purity indicated in this column was the minimum degree of purity of the active substance used for the evaluation made in accordance with Article 8 of Regulation (EU) No 528/2012. The active substance in the product placed on the market can be of equal or different purity if it has been proven technically equivalent with the evaluated active substance.
For the implementation of the common principles of Annex VI to Regulation (EU) No 528/2012, the content and conclusions of assessment reports are available on the Commission website: http://ec.europa.eu/comm/environment/biocides/index.htm
Regulation (EC) No 470/2009 of the European Parliament and of the Council of 6 May 2009 laying down Community procedures for the establishment of residue limits of pharmacologically active substances in foodstuffs of animal origin, repealing Council Regulation (EEC) No 2377/90 and amending Directive 2001/82/EC of the European Parliament and of the Council and Regulation (EC) No 726/2004 of the European Parliament and of the Council (OJ L 152, 16.6.2009, p. 11).
Regulation (EC) No 396/2005 of the European Parliament and of the Council of 23 February 2005 on maximum residue levels of pesticides in or on food and feed of plant and animal origin and amending Council Directive 91/414/EEC (OJ L 70, 16.3.2005, p. 1).
Reading this document does not replace reading the official text published in the Official Journal of the European Union. We assume no responsibility for any inaccuracies arising from the conversion of the original to this format.
This text is published under EUR-Lex's own terms of reuse, not a Legalize or public-domain licence.
EUR-Lex
Creative Commons Attribution 4.0 International (CC BY 4.0)
© European Union, https://eur-lex.europa.eu — Source: EUR-Lex (Publications Office of the European Union). Reused under the Creative Commons Attribution 4.0 International (CC BY 4.0) licence. Only EU legislation published in the printed Official Journal of the European Union is deemed authentic; consolidated texts are reproduced here for documentation purposes and have been reformatted to Markdown.