Commission Implementing Regulation (EU) 2016/323 of 24 February 2016 laying down detailed rules on cooperation and exchange of information between Member States regarding goods under excise duty suspension pursuant to Council Regulation (EU) No 389/2012

COMMISSION IMPLEMENTING REGULATION (EU) 2016/323

of 24 February 2016

laying down detailed rules on cooperation and exchange of information between Member States regarding goods under excise duty suspension pursuant to Council Regulation (EU) No 389/2012

CHAPTER I

GENERAL PROVISIONS

Article 1

Subject matter

For the purposes of cooperation and exchange of information between Member States regarding goods under excise duty suspension, this Regulation lays down detailed rules concerning the following:

(a) the structure and content of the mutual administrative assistance documents exchanged through the computerised system referred to in Article 2 (8) of Regulation (EU) No 389/2012 for the purposes of Articles 8, 15 and 16 of that Regulation;

(b) the structure and content of communications of feedback on follow-up action taken as a result of cooperation on request or of optional communication of information;

(c) the rules and procedures to be used by competent authorities exchanging mutual administrative assistance documents;

(d) the structure and content of fall-back mutual administrative assistance documents and the rules and procedures relating to their use.

Article 2

Definition

For the purposes of this Regulation, ‘movement’ means a movement between two or more Member States of goods under excise duty suspension within the meaning of Chapter IV of Directive 2008/118/EC.

Article 3

Structure and content of mutual administrative assistance documents

CHAPTER II

COOPERATION ON REQUEST

SECTION I

Requests for download of information contained in the computerised system

Article 4

Request for download of information where the administrative reference code of a movement is known to the requesting authority

For that purpose the requesting authority shall send a ‘Movement download request’ document, as set out in Table 1 of Annex I, to the requested authority in the Member State of dispatch. The request shall state the administrative reference code of the electronic administrative document under cover of which the movement takes place.

The requested authority shall also send a ‘History of a movement’ document, as set out in Table 3 of Annex I, containing a copy of the electronic administrative document under cover of which the movement takes place and of any other documents relating to that movement.

Article 5

Request for download of information where the administrative reference code is unknown to the requesting authority

For that purpose, the requesting authority shall send a ‘Common request’ document, as set out in Table 4 of Annex I, to the requested authority. The request shall state the relevant search criteria and include any information which supports the selection of those criteria.

SECTION II

Requests for information not contained in the computerised system

Article 6

Requests for information and administrative enquiries

SECTION IIA

Requests for manual closure

Article 6a

Request for manual closure

For the purpose of Article 8(1) of Regulation (EU) No 389/2012, when the movement of excise goods under duty suspension arrangement cannot be closed under Article 24 or 25 of Directive 2008/118/EC, the requesting authority may request the competent authority in the Member State of dispatch to close a movement of excise goods under excise duty suspension manually. Such a request shall be made by sending a ‘Manual Closure Request’ document set out in Table 15 of Annex I.

SECTION III

Time limits and refusals

Article 7

Time limits

Article 8

Refusal to cooperate

Where the requested authority refuses to handle a request for information, to carry out an administrative enquiry relating to the requested information, or to provide the information requested, it shall notify the requesting authority by means of an ‘Answer message’ document, as set out in Table 8 of Annex I to this Regulation.

It shall send such notification as soon as it has taken its decision and in any event within three months of receipt of the request.

CHAPTER III

EXCHANGE OF INFORMATION WITHOUT PRIOR REQUEST

Article 9

Optional exchange of information

Article 10

Mandatory exchange of information — goods under excise duty suspension covered by the provisions of Chapter III of Directive 2008/118/EC or goods received by a registered consignee

Where one of the cases referred to in points (a) to (e) of Article 15(1) of Regulation (EU) No 389/2012 is detected as a result of a documentary or physical control of goods at the premises of a registered consignee within the meaning of Article 4(9) of Directive 2008/118/EC (hereinafter referred to as ‘registered consignee’) or of an authorised warehouse keeper within the meaning of Article 4(1) of that Directive (hereinafter referred to as ‘authorised warehouse keeper’), the mandatory transmission of the necessary information shall be carried out using an ‘Administrative cooperation results’ document, as set out in Table 10 of Annex I to this Regulation.

The ‘Administrative cooperation results’ document shall be sent to the competent authorities in the Member State concerned within seven days of the control.

Article 11

Mandatory exchange of information — control report

Where one of the cases referred to in points (a) to (e) of Article 15(1) of Regulation (EU) No 389/2012 is detected as a result of a documentary or physical control of goods during a movement, the mandatory transmission of the control report shall be carried out using a ‘Control report’ document, as set out in Table 11 of Annex I to this Regulation.

The ‘Control report’ document shall be sent to the competent authorities in the Member States concerned within seven days of the control.

Article 12

Mandatory exchange of information — definitive interruption of a movement

Where a competent authority becomes aware of the definitive interruption of a movement due to one of the cases referred to in points (a) to (e) of Article 15(1) of Regulation (EU) No 389/2012, the mandatory transmission of that information shall be carried out using an ‘Interruption of movement’ document, as set out in Table 13 of Annex I to this Regulation.

The ‘Interruption of movement’ document shall be sent to the competent authorities in the Member States concerned within one day of the moment when the competent authority referred to in the first paragraph becomes aware of the definitive interruption.

Article 13

Mandatory exchange of information — alert or rejection notification

Where a competent authority becomes aware that goods under excise duty suspension dispatched to a registered consignee or an authorised warehouse keeper had not been requested, or that the content of the electronic administrative document concerning goods under excise duty suspension dispatched to a registered consignee or an authorised warehouse keeper is incorrect, and the competent authority suspects that this is due to one of cases referred to in points (a) to (c) or (e) of Article 15(1) of Regulation (EU) No 389/2012, it shall send an ‘Alert or rejection of an e-AD’ document, as set out in Table 14 of Annex I to this Regulation, to the competent authority of the Member State of dispatch.

The ‘Alert or Rejection of an e-AD’ document shall be sent to the competent authority of the Member State of dispatch within one day of the moment when the competent authority becomes aware of the facts referred to in the first paragraph.

Article 14

Mandatory exchange of information — event reports

Where a competent authority becomes aware of facts concerning a movement other than those set out in Articles 10, 11, 12 or 13 and the competent authority suspects that they relate to one of the cases in points (a) to (e) of Article 15(1) of Regulation (EU) No 389/2012, the mandatory transmission of the necessary information shall be carried out using an ‘Event report’ document, as set out in Table 12 of Annex I to this Regulation.

The ‘Event report’ document shall be sent within seven days of the moment when the competent authority becomes aware of the facts referred to in the first paragraph.

Article 14a

Mandatory exchange of information — manual closure

For the purpose of Article 15(1)(c) of Regulation (EU) No 389/2012, where a competent authority of the Member State of dispatch has received evidence of the completion of a movement of excise goods under duty suspension arrangement and the movement cannot be closed under Article 24 or Article 25 of Directive 2008/118/EC, it shall decide whether to close the movement of excise goods manually.

The competent authority of the Member State of dispatch shall notify the competent authorities of the Member State of destination or of the Member State of export of its decision.

The notification of a decision to manually close a movement shall be made by means of a ‘Manual Closure Response’ document, set out in Table 16 of Annex I to this Regulation.

CHAPTER IV

COMMON PROVISIONS ON THE EXCHANGE OF INFORMATION

Article 15

Unavailability of the computerised system and the use of the fall-back mutual administrative assistance document

(a) the computerised system is unavailable due to hardware or telecommunication failures;

(b) network problems occur which are not under the direct control of the Commission or the Member State concerned;

(c) force majeure;

(d) scheduled maintenance notified at least 48 hours before the planned start of the maintenance period.

The fall-back mutual administrative assistance document shall be exchanged by any means agreed between the competent authorities concerned.

Article 16

Feedback on follow-up action taken as a result of exchange of information

A request for feedback and feedback on follow-up action in accordance with Article 8(5), Article 15(2) or Article 16(2) of Regulation (EU) No 389/2012 shall be made by means of an ‘Administrative cooperation results’ document, as set out in Table 10 of Annex I to this Regulation. The feedback shall be provided by sending a further ‘Administrative cooperation results’ document, as set out in Table 10.

CHAPTER V

FINAL PROVISIONS

Article 17

Entry into force

This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.

This Regulation shall be binding in its entirety and directly applicable in all Member States.

ANNEX I

STRUCTURE OF COMMON MESSAGES

Electronic messages used for the purpose of information exchange concerning excise goods under duty suspension

EXPLANATORY NOTES

(1)The data elements of the electronic messages used for the purpose of information exchange concerning excise goods under duty suspension using the computerised system referred to in Article 21(2) of Directive 2008/118/EC and in Article 2(17) of Regulation (EU) No 389/2012 are structured in data groups and, where applicable, data subgroups. Details regarding the data and their use are presented in the tables of this Annex, in which:

(a) column A sets out the numeric code (number) attributed to each data group and data subgroup; each subgroup follows the sequence number of the data (sub)group of which it forms part (for example: where the data group number is 1, one data subgroup of that group is 1.1 and one data subgroup of that subgroup is 1.1.1);

(b) column B sets out the alphabetic code (letter) attributed to each data element in a data (sub)group;

(c) column C identifies the data (sub)group or data element;

(d) column D indicates for each data (sub)group or data element a value indicating whether the insertion of the corresponding data is: — ‘R’ (required), meaning that the data must be provided; when a data (sub)group is ‘O’ (optional) or ‘C’ (conditional), data elements within that group can still be ‘R’ (required) when the competent authorities of the Member State have decided that the data in that (sub)group must be completed or when the condition for the enclosing data (sub)group is fulfilled, — ‘O’ (optional), meaning that the insertion of the data is optional for the person submitting the message (the consignor or consignee) except where a Member State has stipulated that the data are required in accordance with the option provided for in column E for some of the optional data (sub)groups or data elements, — ‘C’ (conditional), meaning that the use of the data (sub)group or data element depends on other data (sub)groups or data elements in the same message;

(e) column E sets out the condition(s) on which the insertion of data is conditional, specifies the use of the optional data where applicable and indicates which data must be provided by the competent authorities;

(f) column F provides explanations, where necessary, concerning the completion of the message;

(g) column G indicates: — for some data (sub)groups a number followed by the character ‘x’ indicating how many times the data (sub)group can be repeated in the message (default = 1), — for each data element, except for data elements indicating the time or date, the characteristics identifying the data type and the data length; the codes for the data types are as follows: a alphabetic, n numeric, an alphanumeric. The number following the code indicates the admissible data length for the data element concerned. The two dots before the length indicator mean that the data have no fixed length, but can have up to a number of digits, as specified by the length indicator. A comma in the data length means that the data can hold decimals, the number before the comma indicating the total length of the attribute, and the number after the comma indicating the maximum number of digits after the decimal point. For data elements indicating the time or date, the mention ‘date’, ‘time’ or ‘dateTime’ means that the date, the time or the date and time must be given using the ISO 8601 standard for representation of dates and time.

(2)The following abbreviations are used in the tables of this Annex:

— e-AD: electronic administrative document,

— ARC: administrative reference code,

— SEED: system for exchange of excise data (the electronic database referred to in Article 19(1) of Regulation (EU) No 389/2012),

— CN Code: Combined Nomenclature code,

— MRN: movement reference Number,

— LRN: local reference number,

— LNG: language,

— VAT: value added tax,

— ACO: administrative cooperation.

A	B	C	D	E	F	G
1	ATTRIBUTES	R
	a	Request Correlation Identifier	R		The value of is unique per Member State.	an..44
2	EXCISE MOVEMENT e-AD	R
	a	ARC	R		(see Code list 2 in Annex II to Regulation (EC) No 684/2009)	an21
	b	Sequence Number	R		The value of the Data Item must be greater than zero.	n..2
	c	National Movement Information Requested flag	R		The format of Boolean is digital: ‘0’ or ‘1’ (‘0’ = No or False; ‘1’ = Yes or True)	n1
	d	Status	R		The possible values are: X01 = Accepted X02 = Cancelled X03 = Delivered X04 = Diverted X05 = Rejected X06 = Replaced X07 = e-AD Manually closed X08 = Refused X09 = None X10 = Partially Refused X11 = Exporting X12 = Accepted for Export X13 = Stopped	an3
	e	Last Received Message Type	R		The possible values are: IE801 = E-AD IE803 = NOTIFICATION OF DIVERTED E-AD IE807 = INTERRUPTION OF MOVEMENT IE810 = CANCELLATION OF AN E-AD IE813 = CHANGE OF DESTINATION IE818 = ACCEPTED OR (PARTIALLY) REFUSED REPORT OF RECEIPT/EXPORT IE819 = ALERT OR REJECTION OF AN E-AD IE829 = NOTIFICATION OF ACCEPTED EXPORT IE839 = REJECTION OF E-AD FOR EXPORT IE905 = STATUS RESPONSE None = NONE Note: The IE905 should be included only when the e-AD is manually closed.	an..5
	f	Status Request Message Type	O		The possible values are: 1 = Status Synchronisation Request 2 = Movement History Request	n1
A	B	C	D	E	F	G
---	---	---	---	---	---	---
1	ATTRIBUTES	R
	a	Request Correlation Identifier	R		The value of is unique per Member State.	an..44
2	EXCISE MOVEMENT e-AD	R
	a	ARC	R		(see Code list 2 in Annex II to Regulation (EC) No 684/2009)	an21
	b	Sequence Number	R		The value of the Data Item must be greater than zero.	n..2
	c	Status	R		The possible values of are: X01 = Accepted X02 = Cancelled X03 = Delivered X04 = Diverted X05 = Rejected X06 = Replaced X07 = e-AD Manually closed X08 = Refused X09 = None X10 = Partially Refused X11 = Exporting X12 = Accepted for Export X13 = Stopped	an3
	d	Last Received Message Type	R		The possible values are: IE801 = E-AD IE803 = NOTIFICATION OF DIVERTED E-AD IE807 = INTERRUPTION OF MOVEMENT IE810 = CANCELLATION OF AN E-AD IE813 = CHANGE OF DESTINATION IE818 = ACCEPTED OR (PARTIALLY) REFUSED REPORT OF RECEIPT/EXPORT IE819 = ALERT OR REJECTION OF AN E-AD IE829 = NOTIFICATION OF ACCEPTED EXPORT IE839 = REJECTION OF E-AD FOR EXPORT IE905 = STATUS RESPONSE None = NONE Note: The IE905 should be included only when the e-AD is manually closed.	an..5
A	B	C	D	E	F	G
---	---	---	---	---	---	---
1	ATTRIBUTES	R
	a	Request Correlation Identifier	R		The value of is unique per Member State.	an..44
2	All validated e-ADs	R		The set of all draft electronic administrative documents and electronic administrative documents relating to the movement, the structure of which is set out in Table 1 of Annex I to Regulation (EC) No 684/2009	99x
3	All Reports of Receipt/Export	O		The set of all Report of receipt/Report of export messages relating to the movement, the structure of which is set out in Table 6 of Annex I to Regulation (EC) No 684/2009	99x
4	Last Notification of Diverted e-AD	O		The content of the last Notification of change of destination/Notification of splitting message relating to the movement, the structure of which is set out in Table 4 of Annex I to Regulation (EC) No 684/2009	1x
5	All Control Reports	O		The set of all Control Report messages relating to the movement, the structure of which is set out in Table 11	99x
6	All Event Reports	O		The set of all Event Report messages relating to the movement, the structure of which is set out in Table 12	99x
7	All explanations of delay for delivery	O		The set of all Explanation on delay for delivery messages relating to the movement	99x
7.1	ATTRIBUTES	R
	a	Message Role	R		The possible values are: 1 = Explanation on delay for sending the report of receipt/export 2 = Explanation on delay for giving destination	n1
	b	Date and Time of Validation of Explanation on Delay	C	— ‘R’ after successful validation — Does not apply otherwise		dateTime
	c	Submitter Type	R		The possible values are: 1 = Consignor 2 = Consignee	n1
	d	Submitter Identification R an13 Rule072	R		The is a valid trader excise number. (see Code list 1 in Annex II to Regulation (EU) No 612/2013)	an13
	e	Explanation Code	R		(see Code list 7 in Annex II)	n..2
	f	Complementary Information	C	— ‘R’ if is ‘Other’ — ‘O’ Otherwise (see Explanation Code in box 7.1e)		an..350
	g	Complementary Information_LNG	C	— ‘R’ if the corresponding text field(s) is(are) used — Does not apply otherwise	Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group	a2
7.2	EXCISE MOVEMENT e-AD	R
	a	ARC	R		(see Code list 2 in Annex II to Regulation (EC) No 684/2009)	an21
	b	Sequence Number	R		The value of the Data Item must be greater than zero.	n..2
8	All Notifications of Export	O		The set of all Notification of accepted export messages relating to the movement	99x
8.1	ATTRIBUTES	R
	a	Date and Time of Issuance	R			dateTime
8.2	EXCISE MOVEMENT e-AD	R			99x
	a	ARC	R		(see Code list 2 in Annex II to Regulation (EC) No 684/2009)	an21
	b	Sequence Number	R		The value of the Data Item must be greater than zero.	n..2
8.3	TRADER Consignee	C	Does not apply if of all concerned e-ADs is ‘Submission for export (local clearance)’ — ‘R’ otherwise
	a	Trader Identification	C	— ‘R’ if is: — — ‘Destination - Tax warehouse’ — ‘Destination - Registered consignee’ — ‘Destination - Temporary registered consignee’ — ‘Destination - Direct delivery’ — ‘O’ if is ‘Destination – Export’ — Does not apply otherwise	The possible values of are described in the following table: Destination Type Code TRADER CONSIGNEE. Trader Identification TRADER Place of Delivery.Trader Identification 1 -  Destination- Tax warehouse Excise number (1) Tax Warehouse Reference (Excise Number) (5) 2 -  Destination- Registered consignee Excise number (2) Any identification (1) 3 -  Destination- Temporary registered consignee Temporary authorisation reference (4) Any identification (1) 4 -  Destination- Direct delivery Excise number (3) (Does not apply) 5 -  Destination- Exempted consignee (Does not apply) Any identification (1) 6 -  Destination– Export VAT number (optional) (The data group does not exist) (1)The operator type of the consignee is ‘Authorised warehouse keeper’. An existing identifier in the set of ; (2)The operator type of the consignee is ‘Registered consignee’. An existing identifier in the set of ; (3)The operator type of the consignee is either ‘Authorised warehouse keeper’ or ‘Registered consignee’. An existing identifier in the set of ; (4)An existing in the set of ; (5)An existing identifier in the set of ; (1)For the place of delivery, ‘Any identification’ means: a VAT number or any other identifier; it is optional. (see Code list 1 and Code list 2 in Annex II to Regulation (EU) No 612/2013, if applicable)	an..16
Destination Type Code	TRADER CONSIGNEE. Trader Identification	TRADER Place of Delivery.Trader Identification
1 -  Destination- Tax warehouse	Excise number (1)	Tax Warehouse Reference (Excise Number) (5)
2 -  Destination- Registered consignee	Excise number (2)	Any identification (*1)
3 -  Destination- Temporary registered consignee	Temporary authorisation reference (4)	Any identification (*1)
4 -  Destination- Direct delivery	Excise number (3)	(Does not apply)
5 -  Destination- Exempted consignee	(Does not apply)	Any identification (*1)
6 -  Destination– Export	VAT number (optional)	(The data group does not exist)
(1)The operator type of the consignee is ‘Authorised warehouse keeper’. An existing identifier in the set of ; (2)The operator type of the consignee is ‘Registered consignee’. An existing identifier in the set of ; (3)The operator type of the consignee is either ‘Authorised warehouse keeper’ or ‘Registered consignee’. An existing identifier in the set of ; (4)An existing in the set of ; (5)An existing identifier in the set of ; (*1)For the place of delivery, ‘Any identification’ means: a VAT number or any other identifier; it is optional.
	b	EORI Number	C	— ‘O’ if is ‘Destination – Export’ — Does not apply otherwise	Provide the EORI number of the person responsible for lodging the export declaration as set out in Article 21(5) of Directive 2008/118/EC.	an..17
	c	Trader Name	R			an..182
	d	Street Name	R			an..65
	e	Street Number	O			an..11
	f	Postcode	R			an..10
	g	City	R			an..50
	h	NAD_LNG	R		Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group	a2
8.4	OFFICE Place of Export	O
	a	Office Reference Number	R		(see Code list 5 in Annex II to Regulation (EC) No 684/2009)	an8
8.5	EXPORT ACCEPTANCE	R
	a	Sender Customs Office Reference Number	R		(see Code list 5 in Annex II to Regulation (EC) No 684/2009)	an8
	b	Sender Customs Officer Identification	O			an..35
	c	Date of Acceptance	R			date
	d	MRN Export	R		A valid MRN or SAD Number confirmed against Customs data, according to the Customs case. MRN = Movement Reference Number SAD = Single Administrative Document	an..21
9	All Notifications of refusal by Customs	O		The set of all Customs rejection of e-AD messages relating to the movement	99x
9.1	ATTRIBUTES	R
	a	Date and Time of Issuance	R			dateTime
9.2	The concerned draft e-AD	C	In the case of rejection at import one concerned draft e-AD must be given or in the case of rejection at export one or several concerned validated e-ADs must be given. (see All concerned validated e-ADs in box 9.3)
	a	Local Reference Number	R			an..22
9.3	All concerned validated e-ADs	C	In the case of rejection at import one concerned draft e-AD must be given or in the case of rejection at export one or several concerned validated e-ADs must be given. (see The concerned draft e-AD in box 9.2)		99x
	a	ARC	R		(see Code list 2 in Annex II to Regulation (EC) No 684/2009)	an21
	b	Sequence Number	R			n..2
9.4	REJECTION	R
	a	Rejection Date and Time	R			dateTime
	b	Rejection Reason Code	R		The possible values are: 1 = Import data not found 2 = The contents of the e-AD does not match with import data 3 = Export data not found 4 = The content of the e-AD does not match with export data 5 = Goods are rejected at export procedure	n1
9.5	EXPORT CROSS CHECKING DIAGNOSES	C	‘R’ if is ‘The content of the e-AD does not match with export data’ — Does not apply otherwise (see Rejection Reason Code in box 9.4b)
	a	LRN Export	C	At least one of the following attributes must be present: —  —  (see MRN Export in box 9.5b)		an..22
	b	MRN Export	C	At least one of the following attributes must be present: —  —  (see LRN Export in box 9.5a)	A valid MRN or SAD Number confirmed against Customs data, according to the Customs case. MRN = Movement Reference Number SAD = Single Administrative Document	an..21
9.6	DIAGNOSIS	R			999x
	a	ARC	R		(see Code list 2 in Annex II to Regulation (EC) No 684/2009)	an21
	b	Body Record Unique Reference	R		The value of the Data Item must be greater than zero.	n..3
	c	Diagnosis Code	R		The possible values are: 1 = Unknown ARC 2 = Body Record Unique Reference does not exist in the e-AD 3 = No corresponding GOODS ITEM in the export declaration 4 = Weight/mass do not match 5 = The destination type code of the e-AD is not export 6 = CN codes do not match	n1
9.7	TRADER Consignee	C	— ‘R’ if of all concerned e-ADs is not ‘Submission for export (local clearance)’ — Does not apply otherwise	The possible Message Types are: 1 = Standard submission (to be used in all cases except where submission concerns export with local clearance) 2 = Submission for export with local clearance (Application of Article 283 of Commission Regulation (EEC) No 2454/93 (1)) The message type must not occur in the e-AD to which an ARC has been assigned, nor in the paper document referred to in Article 8(1) of Regulation (EC) No 684/2009
	a	Trader Identification	C	— ‘R’ if is in: — — ‘Destination - Tax warehouse’ — ‘Destination - Registered consignee’ — ‘Destination - Temporary registered consignee’ — ‘Destination - Direct delivery’ — ‘O’ if is ‘Destination – Export’ — Does not apply otherwise	The possible values of are described in the following table: Destination Type Code TRADER CONSIGNEE. Trader Identification TRADER Place of Delivery.Trader Identification 1 -  Destination- Tax warehouse Excise number (1) Tax Warehouse Reference (Excise Number) (5) 2 -  Destination- Registered consignee Excise number (2) Any identification (1) 3 -  Destination- Temporary registered consignee Temporary authorisation reference (4) Any identification (1) 4 -  Destination- Direct delivery Excise number (3) (Does not apply) 5 -  Destination- Exempted consignee (Does not apply) Any identification (1) 6 -  Destination– Export VAT number (optional) (The data group does not exist) (1)The operator type of the consignee is ‘Authorised warehouse keeper’. An existing identifier in the set of ; (2)The operator type of the consignee is ‘Registered consignee’. An existing identifier in the set of ; (3)The operator type of the consignee is either ‘Authorised warehouse keeper’ or ‘Registered consignee’. An existing identifier in the set of ; (4)An existing in the set of ; (5)An existing identifier in the set of ; (1)For the place of delivery, ‘Any identification’ means: a VAT number or any other identifier; it is optional. (see Code list 1 and Code list 2 in Annex II to Regulation (EU) No 612/2013, if applicable)	an..16
Destination Type Code	TRADER CONSIGNEE. Trader Identification	TRADER Place of Delivery.Trader Identification
1 -  Destination- Tax warehouse	Excise number (1)	Tax Warehouse Reference (Excise Number) (5)
2 -  Destination- Registered consignee	Excise number (2)	Any identification (*1)
3 -  Destination- Temporary registered consignee	Temporary authorisation reference (4)	Any identification (*1)
4 -  Destination- Direct delivery	Excise number (3)	(Does not apply)
5 -  Destination- Exempted consignee	(Does not apply)	Any identification (*1)
6 -  Destination– Export	VAT number (optional)	(The data group does not exist)
(1)The operator type of the consignee is ‘Authorised warehouse keeper’. An existing identifier in the set of ; (2)The operator type of the consignee is ‘Registered consignee’. An existing identifier in the set of ; (3)The operator type of the consignee is either ‘Authorised warehouse keeper’ or ‘Registered consignee’. An existing identifier in the set of ; (4)An existing in the set of ; (5)An existing identifier in the set of ; (*1)For the place of delivery, ‘Any identification’ means: a VAT number or any other identifier; it is optional.
	b	EORI Number	C	— ‘O’ if is ‘Destination – Export’ — Does not apply otherwise	Provide the EORI number of the person responsible for lodging the export declaration as set out in Article 21(5) of Directive 2008/118/EC.	an..17
	c	Trader Name	R			an..182
	d	Street Name	R			an..65
	e	Street Number	O			an..11
	f	Postcode	R			an..10
	g	City	R			an..50
	h	NAD_LNG	R		Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group	a2
9.8	OFFICE Place of Export	O
	a	Office Reference Number	R		(see Code list 5 in Annex II to Regulation (EC) No 684/2009)	an8
10	The Possible Interruption of Movement	O		The content of a possible Interruption of movement message relating to the movement, the structure of which is set out in Table 13	1x
11	The Possible Cancellation of e-AD	O		The content of a possible Cancellation message relating to the movement, the structure of which is set out in Table 2 of Annex I to Regulation (EC) No 684/2009	1x
12	All Changes of Destination	O		The set of all Change of destination messages relating to the movement, the structure of which is set out in Table 3 of Annex I to Regulation (EC) No 684/2009	99x
13	All Alerts or Rejections of an e-AD	O		The set of all Alert or Rejection of an e-AD messages relating to the movement, the structure of which is set out in Table 14	99x
13.1	ATTRIBUTES	R
	a	Date and Time of Validation of Alert or Rejection	C	— ‘R’ after successful validation — Does not apply otherwise		dateTime
13.2	EXCISE MOVEMENT e-AD	R
	a	ARC	R		(see Code list 2 in Annex II to Regulation (EC) No 684/2009)	an21
	b	Sequence Number	R		The value of the Data Item must be greater than zero.	n..2
13.3	TRADER Consignee	R
	a	Trader Identification	C	— ‘R’ if is in: — — ‘Destination - Tax warehouse’ — ‘Destination - Registered consignee’ — ‘Destination - Temporary registered consignee’ — ‘Destination - Direct delivery’ — ‘O’ if is ‘Destination – Export’ — Does not apply otherwise	The possible values of are described in the following table: Destination Type Code TRADER CONSIGNEE. Trader Identification TRADER Place of Delivery.Trader Identification 1 -  Destination- Tax warehouse Excise number (1) Tax Warehouse Reference (Excise Number) (5) 2 -  Destination- Registered consignee Excise number (2) Any identification (1) 3 -  Destination- Temporary registered consignee Temporary authorisation reference (4) Any identification (1) 4 -  Destination- Direct delivery Excise number (3) (Does not apply) 5 -  Destination- Exempted consignee (Does not apply) Any identification (1) 6 -  Destination– Export VAT number (optional) (The data group does not exist) (1)The operator type of the consignee is ‘Authorised warehouse keeper’. An existing identifier in the set of ; (2)The operator type of the consignee is ‘Registered consignee’. An existing identifier in the set of ; (3)The operator type of the consignee is either ‘Authorised warehouse keeper’ or ‘Registered consignee’. An existing identifier in the set of ; (4)An existing in the set of ; (5)An existing identifier in the set of ; (1)For the place of delivery, ‘Any identification’ means: a VAT number or any other identifier; it is optional. (see Code list 1 and Code list 2 in Annex II to Regulation (EU) No 612/2013, if applicable)	an..16
Destination Type Code	TRADER CONSIGNEE. Trader Identification	TRADER Place of Delivery.Trader Identification
1 -  Destination- Tax warehouse	Excise number (1)	Tax Warehouse Reference (Excise Number) (5)
2 -  Destination- Registered consignee	Excise number (2)	Any identification (*1)
3 -  Destination- Temporary registered consignee	Temporary authorisation reference (4)	Any identification (*1)
4 -  Destination- Direct delivery	Excise number (3)	(Does not apply)
5 -  Destination- Exempted consignee	(Does not apply)	Any identification (*1)
6 -  Destination– Export	VAT number (optional)	(The data group does not exist)
(1)The operator type of the consignee is ‘Authorised warehouse keeper’. An existing identifier in the set of ; (2)The operator type of the consignee is ‘Registered consignee’. An existing identifier in the set of ; (3)The operator type of the consignee is either ‘Authorised warehouse keeper’ or ‘Registered consignee’. An existing identifier in the set of ; (4)An existing in the set of ; (5)An existing identifier in the set of ; (*1)For the place of delivery, ‘Any identification’ means: a VAT number or any other identifier; it is optional.
	b	EORI Number	C	— ‘O’ if is ‘Destination – Export’ — Does not apply otherwise	Provide the EORI number of the person responsible for lodging the export declaration as set out in Article 21(5) of Directive 2008/118/EC.	an..17
	c	Trader Name	R			an..182
	d	Street Name	R			an..65
	e	Street Number	O			an..11
	f	Postcode	R			an..10
	g	City	R			an..50
	h	NAD_LNG	R		Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group	a2
13.4	OFFICE of Destination	R
	a	Office Reference Number	R		(see Code list 5 in Annex II to Regulation (EC) No 684/2009)	an8
13.5	ALERT	R
	a	Date of Alert	R			date
	b	E-AD Rejected flag	R		The format of Boolean is digital: ‘0’ or ‘1’ (‘0’ = No or False; ‘1’ = Yes or True)	n1
13.6	ALERT OR REJECTION OF E-AD REASON Code	C	— ‘R’ if is True — ‘O’ if is False (see E-AD Rejected Flag in box 13.5b)		9x
	a	Alert or Rejection of E-AD Reason Code	R		(see Code list 5 in Annex II)	n..2
	b	Complementary Information	C	— ‘R’ if is ‘Other’ — ‘O’ otherwise (see Alert or Rejection of E-AD Reason Code in box 13.6a)		an..350
	c	Complementary Information_LNG	C	— ‘R’ if the corresponding text field is used — Does not apply otherwise	Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group	a2
14	All Explanations on reason for shortage	O			99x
14.1	ATTRIBUTES	R
	a	Submitter Type	R		The possible values are: 1 = Consignor 2 = Consignee	n1
	b	Date and Time of Validation of Explanation on Shortage	C	— ‘R’ after successful validation — Does not apply otherwise		dateTime
14.2	EXCISE MOVEMENT e-AD	R
	a	ARC	R		(see Code list 2 in Annex II to Regulation (EC) No 684/2009)	an21
	b	Sequence Number	R		The value of the Data Item must be greater than zero.	n..2
14.3	TRADER Consignor	C	— ‘R’ if is ‘Consignor’ — Does not apply otherwise (see Submitter Type in box 14.1a)
	a	Trader Excise Number	R		For TRADER Consignor An existing identifier in the set of The of the referred must be: — ‘Authorised warehouse keeper’; OR — ‘Registered consignor’ For TRADER Place of dispatch An existing identifier (Excise Number in SEED). (see Code list 1 in Annex II to Regulation (EU) No 612/2013)	an13
	b	Trader Name	R			an..182
	c	Street Name	R			an..65
	d	Street Number	O			an..11
	e	Postcode	R			an..10
	f	City	R			an..50
	g	NAD_LNG	R		Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group	a2
14.4	TRADER Consignee	C	— ‘R’ if is not ‘Consignor’ — Does not apply otherwise (see Submitter Type in box 14.1a)
	a	Trader Identification	C	— ‘R’ if is in: — — ‘Destination - Tax warehouse’ — ‘Destination - Registered consignee’ — ‘Destination — Temporary registered consignee’ — ‘Destination — Direct delivery’ — ‘O’ if is ‘Destination – Export’ — Does not apply otherwise	The possible values of are described in the following table: Destination Type Code TRADER CONSIGNEE. Trader Identification TRADER Place of Delivery.Trader Identification 1 -  Destination- Tax warehouse Excise number (1) Tax Warehouse Reference (Excise Number) (5) 2 -  Destination- Registered consignee Excise number (2) Any identification (1) 3 -  Destination- Temporary registered consignee Temporary authorisation reference (4) Any identification (1) 4 -  Destination- Direct delivery Excise number (3) (Does not apply) 5 -  Destination- Exempted consignee (Does not apply) Any identification (1) 6 -  Destination– Export VAT number (optional) (The data group does not exist) 8 -  Unknown destination (Does not apply) (Does not apply) (1)The operator type of the consignee is ‘Authorised warehouse keeper’. An existing identifier in the set of ; (2)The operator type of the consignee is ‘Registered consignee’. An existing identifier in the set of ; (3)The operator type of the consignee is either ‘Authorised warehouse keeper’ or ‘Registered consignee’. An existing identifier in the set of ; (4)An existing in the set of ; (5)An existing identifier in the set of ; (1)For the place of delivery, ‘Any identification’ means: a VAT number or any other identifier; it is optional. (see Code list 1 and Code list 2 in Annex II to Regulation (EU) No 612/2013, if applicable)	an..16
Destination Type Code	TRADER CONSIGNEE. Trader Identification	TRADER Place of Delivery.Trader Identification
1 -  Destination- Tax warehouse	Excise number (1)	Tax Warehouse Reference (Excise Number) (5)
2 -  Destination- Registered consignee	Excise number (2)	Any identification (*1)
3 -  Destination- Temporary registered consignee	Temporary authorisation reference (4)	Any identification (*1)
4 -  Destination- Direct delivery	Excise number (3)	(Does not apply)
5 -  Destination- Exempted consignee	(Does not apply)	Any identification (*1)
6 -  Destination– Export	VAT number (optional)	(The data group does not exist)
8 -  Unknown destination	(Does not apply)	(Does not apply)
(1)The operator type of the consignee is ‘Authorised warehouse keeper’. An existing identifier in the set of ; (2)The operator type of the consignee is ‘Registered consignee’. An existing identifier in the set of ; (3)The operator type of the consignee is either ‘Authorised warehouse keeper’ or ‘Registered consignee’. An existing identifier in the set of ; (4)An existing in the set of ; (5)An existing identifier in the set of ; (*1)For the place of delivery, ‘Any identification’ means: a VAT number or any other identifier; it is optional.
	b	EORI Number		— ‘O’ if is ‘Destination – Export’ — Does not apply otherwise	Provide the EORI number of the person responsible for lodging the export declaration as set out in Article 21(5) of Directive 2008/118/EC	an..17
	c	Trader Name	R			an..182
	d	Street Name	R			an..65
	e	Street Number	O			an..11
	f	Postcode	R			an..10
	g	City	R			an..50
	h	NAD_LNG	R		Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group	a2
14.5	ANALYSIS	C	At least one of the or data groups must be present
	a	Date of Analysis	R			date
	b	Global Explanation	R			an..350
	c	Global Explanation_LNG	R		Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group	a2
14.6	ANALYSIS Body	C	At least one of the or data groups must be present		999x
	a	Body Record Unique Reference	R		The value of the Data Item must be greater than zero. The must be unique within the message and must refer to a of the e-AD Body of the associated e-AD for which shortages or excesses have been declared.	n..3
	b	Excise Product Code	R		(see Code list 11 in Annex II to Regulation (EC) No 684/2009)	an4
	c	Explanation	O			an..350
	d	Explanation_LNG	C	— ‘R’ if the corresponding text field(s) is(are) used — Does not apply otherwise	Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group	a2
	e	Actual Quantity	O		The value of the Data Item must be greater than zero.	n..15,3
15	All reminder messages for Excise movement	O			99x
15.1	ATTRIBUTES	R
	a	Message Type	R		The possible values are: 1 = Reminder message at expiry of time to change destination (or split) 2 = Reminder message at expiry of time to send the report of receipt/export 3 = Reminder message at expiry of time to give destination information (Article 22 of Directive 2008/118/EC)	n1
	b	Date and Time of Issuance of Reminder	R			dateTime
	c	Limit date and Time	R			dateTime
	d	Reminder Information	O			an..350
	e	Reminder Information_LNG	C	— ‘R’ if the corresponding text field(s) is(are) used — Does not apply otherwise	Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group	a2
15.2	EXCISE MOVEMENT e-AD	R
	a	ARC	R		(see Code list 2 in Annex II to Regulation (EC) No 684/2009)	an21
	b	Sequence Number	R		The value of the Data Item must be greater than zero.	n..2
A	B	C	D	E	F	G
---	---	---	---	---	---	---
1	ATTRIBUTES	R
	a	Request Type	R		The possible values are: 1 = (reserved) 2 = Request for reference data 3 = (reserved) 4 = (reserved) 5 = Request for re-synchronisation of the register of economic operators 6 = Request for retrieval of a list of e-ADs 7 = Request for SEED statistics	n1
	b	Request Message Name	C	— ‘R’ if is ‘2’ — Does not apply otherwise (see Request Type in box 1a)	The possible values are: ‘C_COD_DAT’ = Common list of codes ‘C_PAR_DAT’ = Common system parameters ‘ALL’ = For complete structure	a..9
	c	Requesting Office	R		(see Code list 5 in Annex II to Regulation (EC) No 684/2009)	an8
	d	Request Correlation Identifier	C	— ‘R’ if is ‘2’, ‘5’, ‘6’, or ‘7’ — Does not apply otherwise (see Request Type in box 1a)	The value of is unique per Member State.	an..44
	e	Start Date	C	For 1 e and f: — ‘R’ if is ‘2’ or ‘5’ — Does not apply otherwise (see Request Type in box 1a)		date
	f	End Date	C		date
	g	Single Date	C	— ‘R’ if is ‘2’ or ‘5’ — Does not apply otherwise (see Request Type in box 1a)		date
2	E-AD LIST REQUEST	C	— ‘R’ if is ‘6’ — Does not apply otherwise (see Request Type in box 1a)
	a	Member State Code	R		(see Code list 3 in Annex II to Regulation (EC) No 684/2009)	a2
2.1	RA_PRIMARY CRITERION	R			99x
	a	Primary Criterion Type Code	R		The possible values are: 1 = ARC 2 = Brand name of product 3 = Categories of excise products of the movement 4 = (reserved) 5 = (reserved) 6 = (reserved) 7 = (reserved) 8 = City of consignee 9 = City of consignor 10 = City of guarantor 11 = (reserved) 12 = City of place of delivery 13 = City of tax warehouse of dispatch 14 = City of transporter 15 = CN code of product 16 = Date of invoice 17 = Excise number of consignee 18 = Excise number of consignor 19 = Excise number of guarantor 20 = (reserved) 21 = (reserved) 22 = Excise number of the tax warehouse of destination 23 = Excise number of the tax warehouse of dispatch 24 = (reserved) 25 = Excise product code 26 = Journey time 27 = Member State of destination 28 = Member State of dispatch 29 = Name of consignee 30 = Name of consignor 31 = Name of guarantor 32 = (reserved) 33 = Name of place of delivery 34 = Name of tax warehouse of dispatch 35 = Name of transporter 36 = Number of invoice 37 = Postal code of consignee 38 = Postal code of consignor 39 = Postal code of guarantor 40 = (reserved) 41 = Postal code of place of delivery 42 = Postal code of tax warehouse of dispatch 43 = Postal code of transporter 44 = Quantity of goods (in an e-AD body) 45 = Local Reference Number, being a serial number, assigned by the consignor 46 = Type of transport 47 = (reserved) 48 = (reserved) 49 = VAT number of the consignee 50 = (reserved) 51 = VAT number of the transporter 52 = Change of destination (sequence number ≥ 2)	n..2
2.1.1	RA_PRIMARY VALUE	O			99x
	a	Value	R		If is ‘46’ (Type of transport), then an existing in the list of shall be used.	an..255
3	STA_REQUEST	C	— ‘R’ if is ‘7’ — Does not apply otherwise (see Request Type in box 1a)
	a	Statistic Type	R		The possible values are: 1 = Active and inactive economic operators 2 = Pending expirations 3 = Economic operators by type and tax warehouses 4 = Excise activity 5 = Changes to excise authorisations	n1
3.1	LIST OF MEMBER STATES Code	R			99x
	a	Member State Code	R		(see Code list 3 in Annex II to Regulation (EC) No 684/2009)	a2
4	STA_PERIOD	C	— ‘R’ if is ‘7’ — Does not apply otherwise (see Request Type in box 1a)
	a	Year	R		The value of the data element must be greater than zero.	n4
	b	Semester	C	For 4 b, c, and d: The three following data fields are optional and exclusive: —  —  —  i.e. If one of these data fields is given then the two other data fields do not apply	The possible values are: 1 = First semester 2 = Second semester	n1
	c	Quarter	C	The possible values are: 1 = First quarter 2 = Second quarter 3 = Third quarter 4 = Fourth quarter	n1
	d	Month	C	The possible values are: 1 = January 2 = February 3 = March 4 = April 5 = May 6 = June 7 = July 8 = August 9 = September 10 = October 11 = November 12 = December	n..2
5	REF_REQUEST	C	— ‘R’ if is ‘2’ — Does not apply otherwise (see Request Type in box 1a)
	a	Common Risk Assessment Criteria flag	O		The possible values are: 0 = No or False 1 = Yes or True	n1
5.1	LIST OF CODES Code	O			99x
	a	Requested List of Code	O		The possible values are: 1 = Units of measure 2 = Events types 3 = Evidence types 4 = (reserved) 5 = (reserved) 6 = Language codes 7 = Member States 8 = Country codes 9 = Packaging codes 10 = Reasons for unsatisfactory receipt or control report 11 = Reasons for interruption 12 = (reserved) 13 = Transport modes 14 = Transport units 15 = Wine-growing zones 16 = Wine operation codes 17 = Excise product categories 18 = Excise products 19 = CN codes 20 = Correspondences CN code — Excise product 21 = Cancellation reasons 22 = Alert or rejection of e-AD reasons 23 = Delay explanations 24 = (reserved) 25 = Event submitting persons 26 = Refusal reasons 27 = Reasons for delayed result 28 = Request actions 29 = Request reasons 30 = (reserved) 31 = (reserved) 32 = (reserved) 33 = (reserved) 34 = Administrative cooperation action not possible reasons 35 = (reserved) 36 = Type of document 37 = (reserved) 38 = (reserved) 39 = Manual Closure Request Reasons 40 = Manual Closure Rejection Reasons	n..2
A	B	C	D	E	F	G
---	---	---	---	---	---	---
1	ATTRIBUTES	R
	a	Requesting Office	R		(see Code list 5 in Annex II to Regulation (EC) No 684/2009)	an8
	b	Request Correlation Identifier	R		The value of is unique per Member State.	an..44
2	E-AD LIST ITEM	O			99x
	a	Dispatch Date	R			date
2.1	EXCISE MOVEMENT	R
	a	ARC	R		(see Code list 2 in Annex II to Regulation (EC) No 684/2009)	an21
	b	Date and Time of Validation of e-AD	R			dateTime
	c	Sequence Number	R		The value of the data element must be greater than zero.	n..2
2.2	TRADER Consignor	R
	a	Trader Excise Number	R		For TRADER Consignor An existing identifier in the set of The of the referred must be: — ‘Authorised warehouse keeper’; OR — ‘Registered consignor’ (see Code list 1 in Annex II to Regulation (EU) No 612/2013)	an13
	b	Trader Name	R			an..182
2.3	TRADER Place of Dispatch	C	IF is ‘Origin — Tax warehouse’ THEN is ‘R’ does not apply ELSE does not apply is ‘R’
	a	Tax Warehouse Reference	R		For TRADER Place of dispatch An existing identifier (Excise Number in SEED). (see Code list 1 in Annex II to Regulation (EU) No 612/2013)	an13
	b	Trader Name	O			an..182
2.4	OFFICE of Dispatch — Import	C	IF is ‘Origin — Tax warehouse’ THEN is ‘R’ does not apply ELSE does not apply is ‘R’
	a	Office Reference Number	R		(see Code list 5 in Annex II to Regulation (EC) No 684/2009)	an8
2.5	TRADER Consignee	C	‘R’, except for message type ‘2 — Submission for export with local clearance’ or for Destination Type Code 8
	a	Trader Identification	C	IF is in: — ‘Destination — Tax warehouse’ — ‘Destination — Registered consignee’ — ‘Destination — Temporary registered consignee’ — ‘Destination — Direct delivery’ — THEN is ‘R’ — ELSE — IF is: — ‘Destination — Export’ — THEN is ‘O’ — ELSE does not apply	The possible values of are described in the following table:	an..16
Destination Type Code	TRADER CONSIGNEE. Trader Identification	TRADER Place of Delivery. Trader Identification
1 -  Destination — Tax warehouse	Excise number (1)	Tax Warehouse Reference (Excise Number) (2)
2 -  Destination — Registered consignee	Excise number (3)	Any identification (4)
3 -  Destination — Temporary registered consignee	Temporary authorisation reference (5)	Any identification (6)
4 -  Destination — Direct delivery	Excise number (7)	(Does not apply)
5 -  Destination — Exempted consignee	(Does not apply)	Any identification (8)
6 -  Destination — Export	VAT number (optional)	(The data group does not exist)
8 -  Unknown destination	(Does not apply)	(Does not apply)
(1)  The operator type of the consignee is ‘Authorised warehouse keeper’. An existing identifier in the set of . (2)  An existing identifier in the set of . (3)  The operator type of the consignee is ‘Registered consignee’. An existing identifier in the set of . (4)  For the place of delivery, ‘Any identification’ means: a VAT number or any other identifier; it is optional. (5)  An existing in the set of . (6)  For the place of delivery, ‘Any identification’ means: a VAT number or any other identifier; it is optional. (7)  The operator type of the consignee is either ‘Authorised warehouse keeper’ or ‘Registered consignee’. An existing identifier in the set of . (8)  For the place of delivery, ‘Any identification’ means: a VAT number or any other identifier; it is optional.
(see Code list 1 and Code list 2 in Annex II to Regulation (EU) No 612/2013, if applicable)
	b	EORI Number	C	— ‘O’ if is ‘Destination — Export’ — Does not apply otherwise	Provide the EORI number of the person responsible for lodging the export declaration as set out in Article 21(5) of Directive 2008/118/EC.	an..17
	c	Trader Name	R			an..182
2.6	TRADER Place of Delivery	C	The optionality of data groups and are described below, according to the : — ‘R’ for Destination Type Code 1 and 4 — ‘O’ for Destination Type Code 2, 3 and 5 — does not apply otherwise.	—	—
	a	Trader Identification	C	IF is ‘Destination — Tax warehouse’ THEN is ‘R’ ELSE IF is ‘Destination — Direct delivery’ THEN does not apply ELSE is ‘O’	The possible values of are described in the following table:	an..16
Destination Type Code	TRADER CONSIGNEE. Trader Identification	TRADER Place of Delivery. Trader Identification
1 -  Destination — Tax warehouse	Excise number (1)	Tax Warehouse Reference (Excise Number) (2)
2 -  Destination — Registered consignee	Excise number (3)	Any identification (4)
3 -  Destination — Temporary registered consignee	Temporary authorisation reference (5)	Any identification (6)
4 -  Destination — Direct delivery	Excise number (7)	(Does not apply)
5 -  Destination — Exempted consignee	(Does not apply)	Any identification (8)
6 -  Destination — Export	VAT number (optional)	(The data group does not exist)
8 -  Unknown destination	(Does not apply)	(Does not apply)
(1)  The operator type of the consignee is ‘Authorised warehouse keeper’. An existing identifier in the set of . (2)  An existing identifier in the set of . (3)  The operator type of the consignee is ‘Registered consignee’. An existing identifier in the set of . (4)  For the place of delivery, ‘Any identification’ means: a VAT number or any other identifier; it is optional. (5)  An existing in the set of . (6)  For the place of delivery, ‘Any identification’ means: a VAT number or any other identifier; it is optional. (7)  The operator type of the consignee is either ‘Authorised warehouse keeper’ or ‘Registered consignee’. An existing identifier in the set of . (8)  For the place of delivery, ‘Any identification’ means: a VAT number or any other identifier; it is optional.
(see Code list 1 in Annex II to Regulation (EU) No 612/2013, if applicable)
	b	Trader Name	C	IF is ‘Destination — Direct delivery’ THEN is ‘O’ ELSE is ‘R’		an..182
2.7	OFFICE Place of Delivery — Customs	C	The optionality of the data groups and are described in the table below, according to the :
Destination Type Code
1 -  Destination — Tax warehouse	‘R’	Does not apply
2 -  Destination — Registered consignee	‘O’	Does not apply
3 -  Destination — Temporary registered consignee	‘O’	Does not apply
4 -  Destination — Direct delivery	‘R’	Does not apply
5 -  Destination — Exempted consignee	‘O’	Does not apply
6 -  Destination — Export	Does not apply	‘R’
8 -  Unknown destination (consignee unknown)	Does not apply	Does not apply
	a	Office Reference Number	R		(see Code list 5 in Annex II to Regulation (EC) No 684/2009)	an8
2.8	EXCISE PRODUCTS CATEGORY Code	R			9x
	a	Excise Product Category Code	R		(see Code list 3 in Annex II to Regulation (EU) No 612/2013)	a1
2.9	TRADER Transport Arranger	C	IF (IE801) (or (IE815)) is ‘Consignor’ or ‘consignee’ THEN does not apply ELSE is ‘R’
	a	VAT Number	O			an..14
	b	Trader Name	R			an..182
2.10	TRADER First Transporter	O
	a	VAT Number	O			an..14
	b	Trader Name	R			an..182
A	B	C	D	E	F	G
---	---	---	---	---	---	---
1	Common Request Message	R		The context of the Common Request message relating to the movement, the structure of which is set out in Table 4
2	Rejection	R			99x
	a	Rejection Date and Time	R			dateTime
	b	Rejection Reason Code	R		The possible values are: 0 = Other 2 = No e-AD(s) retrieved matching selection criteria 3 = Reference data not available 4 = Excise Office List not available 5 = SEED data not available 7 = Unknown requested data 8 = Increment number out of range 26 = Duplicate detected 112 = Incorrect (code) value 115 = Not supported in this position	n..3
A	B	C	D	E	F	G
---	---	---	---	---	---	---
1	ATTRIBUTES	R
	a	Request Type	R		The possible values are: 1 = Administrative cooperation 2 = Request for history	n1
	b	Deadline for Results	R			date
2	FOLLOW UP	R
	a	Follow-Up Correlation ID	R		(see Code list 1 in Annex II)	an28
	b	Date of Issuance	R			date
	c	Sender Member State Code	R		A Member State identified by a Member State Code in Code list 3 of Annex II to Regulation (EC) No 684/2009.	a2
	d	Sender Office Reference Number	O		(see Code list 5 in Annex II to Regulation (EC) No 684/2009)	an8
	e	Sender Officer	O			an..35
	f	Addressee Member State Code	R		A Member State identified by a Member State Code in Code list 3 of Annex II to Regulation (EC) No 684/2009.	a2
	g	Addressee Office Reference Number	O		(see Code list 5 in Annex II to Regulation (EC) No 684/2009)	an8
	h	Addressee Officer	O			an..35
	i	National Case Reference Identifier	O			an..99
3	ACO_REQUEST	C	— ‘R’ if is ‘1’ — Does not apply otherwise (see Request Type in box 1a)
	a	Administrative Cooperation Request Information	R			an..999
	b	Administrative Cooperation Request Information_LNG	R		Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group.	a2
	c	Flag	O		The possible values are: 0 = No or False 1 = Yes or True	n1
3.1	REQUEST REASON Code	R			99x
	a	Administrative Cooperation Request Reason Code	R		(see Code list 8 in Annex II)	n..2
	b	ACO_Complementary Information	C	— ‘R’ if is ‘Other’ — ‘O’ otherwise	—	an..999
	c	ACO_Complementary Information_LNG	C	— ‘R’ if the corresponding text field(s) is(are) used — Does not apply otherwise	Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group.	a2
3.1.1	RISK ASSESSMENT REFERENCE	O			99x
	a	Other Risk Profile	O			an..999
	b	Other Risk Profile_LNG	C	— ‘R’ if the corresponding text field(s) is(are) used — Does not apply otherwise	Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group.	a2
3.2	ARC List	O			99x
	a	ARC	R		(see Code list 2 in Annex II to Regulation (EC) No 684/2009)	an21
	b	Sequence Number	O		The value of the Data Item must be greater than zero.	n..2
3.3	TRADER Person	O			99x
	a	Trader Excise Number	C	For 3.3 a, b, and c: at least one of the following attributes must be present: —  —  —	An existing identifier (Excise Number) in the set of or in the set of . (see Code list 1 and Code list 2 in Annex II to Regulation (EU) No 612/2013)	an13
	b	VAT Number	C		an..14
	c	Trader Name	C		an..182
	d	Member State Code	C	— ‘R’ if is given and is not given and is not given — Does not apply otherwise (see Trader Excise Number in box 3.3a, VAT Number in box 3.3b, Trader Name in box 3.3c)	A Member State identified by a Member State Code in Code list 3 of Annex II to Regulation (EC) No 684/2009.	a2
	e	Street Name	O			an..65
	f	Street Number	O			an..11
	g	Postcode	O			an..10
	h	City	O			an..50
	i	NAD_LNG	C	— ‘R’ if the corresponding text field(s) is(are) used — Does not apply otherwise	Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group.	a2
	j	Phone Number	O			an..35
	k	Fax Number	O			an..35
	l	Email Address	O			an..70
3.4	SUPPORTING DOCUMENTS	O			9x
	a	Short Description of Supporting Document	C	— ‘R’ if is ‘Other’ — Doesn’t apply otherwise (see Reference of Supporting Document in box 3.4c and Image of Document in box 3.4e)		an..999
	b	Short Description of Supporting Document_LNG	C	— ‘R’ if the corresponding text field(s) is(are) used — Does not apply otherwise	Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group.	a2
	c	Reference of Supporting Document	C	At least one, among these three fields, must be present: —  —  —  (see Short Description of Supporting Document in box 3.4a and Image of Document in box 3.4e)		an..999
	d	Reference of Supporting Document_LNG	C	— ‘R’ if the corresponding text field(s) is(are) used — Does not apply otherwise	Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group.	a2
	e	Image of Document	C	At least one, among these three fields, must be present: —  —  —  (see Short Description of Supporting Document in box 3.4a and Reference of Supporting Document in box 3.4c)
	f	Supporting Document Type	C	At least one, among these three fields, must be present: —  —  —  See Reference of Supporting Document in box 3.4c and Image of Document in box 3.4e	(see code list 15 in Annex II)	n..4
3.5	ACTIONS Requested	O			99x
	a	Administrative Cooperation Action Code	R		(see Code list 9 in Annex II)	n..2
	b	ACO Action Complement	C	— ‘R’ if is ‘Other’ — ‘O’ otherwise (see Administrative Cooperation Action Code in box 3.5a)		an..999
	c	ACO Action Complement_LNG	C	— ‘R’ if the corresponding text field(s) is(are) used — Does not apply otherwise	Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group.	a2
4	HISTORY REQUEST	C	— ‘R’ if is ‘2’ — Does not apply otherwise (see Request Type in box 1a)
	a	ARC	R		(see Code list 2 in Annex II to Regulation (EC) No 684/2009)	an21
	b	History Request Scope Type	R		The possible values are: 1 = Applicable data at a given date set by the 2 = History of data since a given date set by the 3 = Complete history of data (see Scope Date in box 4c)	n1
	c	Scope Date	C	— Does not apply if is ‘3’ — ‘R’ otherwise (see History Request Scope Type in box 4b)		date
	d	History Request Reason	R			an..999
	e	History Request Reason_LNG	R		Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group.	a2
5	CONTACT	O
	a	Office Reference Number	R		(see Code list 5 in Annex II to Regulation (EC) No 684/2009)	an8
	b	Submitting Excise Officer	O			an..35
	c	Tel. Number	O			an..35
	d	Fax Number	O			an..35
	e	Email Address	O			an..70
A	B	C	D	E	F	G
---	---	---	---	---	---	---
1	ATTRIBUTES	R
	a	Message Type	R		The possible values are: 1 = Administrative Cooperation answer message 2 = History answer message	n1
2	FOLLOW UP	R
	a	Follow Up Correlation ID	R		(see Code list 1 in Annex II)	an28
	b	Date of Issuance	R			date
	c	Sender Member State Code	R		A Member State identified by a Member State Code in Code list 3 of Annex II to Regulation (EC) No 684/2009	a2
	d	Sender Office Reference Number	O		(see Code list 5 in Annex II to Regulation (EC) No 684/2009)	an8
	e	Sender Officer	O			an..35
	f	Addressee Member State Code	R		A Member State identified by a Member State Code in Code list 3 of Annex II to Regulation (EC) No 684/2009	a2
	g	Addressee Office Reference Number	O		(see Code list 5 in Annex II to Regulation (EC) No 684/2009)	an8
	h	Addressee Officer	O			an..35
	i	National Case Reference Identifier	C	— ‘O’ If does not match with in a request message — ‘R’ If matches with in a request message AND is present in the request message	IF matches with in a request message AND is present in the request message THEN must be equal to the value of in the request message.	an..99
3	ANSWER	R
	a	Deadline for Results	C	For 3 a and b: — ‘R’ if < Refusal Reason Code> is provided — Does not apply otherwise (see Refusal Reason Code in box 3c)		dateTime
	b	Delayed Result Reason Code	C	(see Code list 3 in Annex II)	n..2
	c	Refusal Reason Code	O		(see Code list 4 in Annex II)	n..2
	d	Refusal Reason Complement	C	— ‘R’ if < Refusal Reason Code> is ‘Other’ — Does not apply otherwise (see Refusal Reason Code in box 3c)		an..999
	e	Refusal Reason Complement_LNG	C	— ‘R’ if the corresponding text field(s) is(are) used — Does not apply otherwise	Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group	a2
A	B	C	D	E	F	G
---	---	---	---	---	---	---
1	ATTRIBUTES	R
	a	Message Type	R		The possible values are: 1 = Administrative cooperation results reminder message 2 = History results reminder message	n1
2	FOLLOW UP	R
	a	Follow Up Correlation ID	R		(see Code list 1 in Annex II)	an28
	b	Date of Issuance	R			date
	c	Sender Member State Code	R		A Member State identified by a Member State Code in Code list 3 of Annex II to Regulation (EC) No 684/2009	a2
	d	Sender Office Reference Number	O		(see Code list 5 in Annex II to Regulation (EC) No 684/2009)	an8
	e	Sender Officer	O			an..35
	f	Addressee Member State Code	R		A Member State identified by a Member State Code in Code list 3 of Annex II to Regulation (EC) No 684/2009	a2
	g	Addressee Office Reference Number	O		(see Code list 5 in Annex II to Regulation (EC) No 684/2009)	an8
	h	Addressee Officer	O			an..35
	i	National Case Reference Identifier	C	— ‘O’ If does not match with in a request message — ‘R’ If matches with in a request message AND is present in the request message — Otherwise it does not apply.	IF matches with in a request message AND is present in the request message THEN must be equal to the value of in the request message.	an..99
A	B	C	D	E	F	G
---	---	---	---	---	---	---
1	FOLLOW UP	R
	a	Follow Up Correlation ID	R		(see Code list 1 in Annex II)	an28
	b	Date of Issuance	R			date
	c	Sender Member State Code	R		A Member State identified by a Member State Code in Code list 3 of Annex II to Regulation (EC) No 684/2009.	a2
	d	Sender Office Reference Number	O		(see Code list 5 in Annex II to Regulation (EC) No 684/2009)	an8
	e	Sender Officer	O			an..35
	f	Addressee Member State Code	R		A Member State identified by a Member State Code in Code list 3 of Annex II to Regulation (EC) No 684/2009.	a2
	g	Addressee Office Reference Number	O		(see Code list 5 in Annex II to Regulation (EC) No 684/2009)	an8
	h	Addressee Officer	O			an..35
	i	National Case Reference Identifier	C	— ‘O’ If does not match with in a request message — ‘R’ If matches with in a request message AND is present in the request message — Otherwise it does not apply.	IF matches with in a request message AND is present in the request message THEN must be equal to the value of in the request message.	an..99
2	CONTACT	O
	a	Office Reference Number	R		(see Code list 5 in Annex II to Regulation (EC) No 684/2009)	an8
	b	Submitting Excise Officer	O			an..35
	c	Tel. Number	O			an..35
	d	Fax Number	O			an..35
	e	Email Address	O			an..70
3	ACO_ACTION RESULT	O			99x
	a	ARC	O		(see Code list 2 in Annex II to Regulation (EC) No 684/2009)	an21
	b	Sequence Number	C	— ‘O’ if is present — Does not apply otherwise (see ARC in box 3a)	The value of the Data Item must be greater than zero.	n..2
	c	Administrative Cooperation Action Code	R		(see Code list 9 in Annex II)	n..2
	d	ACO Action Complement	C	— ‘R’ if is ‘Other’ — ‘O’ otherwise (see Administrative Cooperation Action Code in box 3c)		an..999
	e	ACO Action Complement_LNG	C	— ‘R’ if the corresponding text field(s) is(are) used — Does not apply otherwise	Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group.	a2
	f	ACO Action Not Possible Reason Code	O		(see Code list 11 in Annex II)	n..2
	g	ACO Action Not Possible Reason Complement	C	— ‘R’ if is ‘Other’ — ‘O’ otherwise (see ACO Action Not Possible Reason Code in box 3f)		an..999
	h	ACO Action Not Possible Reason Complement_LNG	C	— ‘R’ if the corresponding text field(s) is(are) used — Does not apply otherwise	Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group.	a2
	i	Finding at Destination	O		The possible values are: 0 = Other finding 1 = (reserved) 2 = Consignment in order 3 = Consignment has not reached destination 4 = Consignment arrived late 5 = Shortage detected 6 = Excise products not in order 7 = Consignment not entered in stock records 8 = Trader could not be contacted 9 = Missing trader 10 = Excess detected 11 = Wrong EPC 12 = Wrong destination type code 13 = Differences confirmed 14 = Manual closing recommended 15 = Interruption recommended 16 = Irregularities Found	n..2
	j	Other Finding Type	C	— ‘R’ if is ‘Other finding’ — Does not apply otherwise (see Finding at Destination in box 3i)		an..999
	k	Other Finding Type_LNG	C	— ‘R’ if the corresponding text field(s) is(are) used — Does not apply otherwise	Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group.	a2
	l	Complementary Explanations	O			an..999
	m	Complementary Explanations_LNG	C	— ‘R’ if the corresponding text field(s) is(are) used — Does not apply otherwise	Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group.	a2
	n	Control Report Reference	O		(see Code list 2 in Annex II) A ‘Control Report’ message exists in the system (including the case that it is encapsulated in a received ‘Movement History’/‘History results’ message) having the same with that of the submitted message. In addition if the is provided in the submitted message then it coincides with the of the referenced ‘Control Report’ message. (see ARC in box 3a)	an16
4	FEEDBACK REQUEST	O
	a	Feedback Requested or Provided	R		The possible values are: 0 = No feedback requested 1 = Feedback requested 2 = Feedback provided	n1
	b	Follow Up Actions	C	At least one among these two fields if box 4a is given: —  —	—	an..999
	c	Follow Up Actions_LNG	C	— ‘R’ if the corresponding text field(s) is (are) used — Does not apply otherwise	Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group.	a2
	d	Relevance of Information Provided	C	At least one among these two fields if box 4a is given: — < Follow Up Actions> —	—	an..999
	e	Relevance of Information_LNG	C	— ‘R’ if the corresponding text field(s) is (are) used — Does not apply otherwise	Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group.	a2
5	SUPPORTING DOCUMENTS	O			9x
	a	Short Description of Supporting Document	C	— ‘R’ if is ‘Other’ — Doesn’t apply otherwise (See Supporting Document Type in box 5f)		an..999
	b	Short Description of Supporting Document_LNG	C	— ‘R’ if the corresponding text field(s) is(are) used — Does not apply otherwise	Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group.	a2
	c	Reference of Supporting Document	C	At least one, among these three fields, must be present: —  —  —  (see Short Description of Supporting Document in box.5a and Image of Document in box 5e)		an..999
	d	Reference of Supporting Document_LNG	C	— ‘R’ if the corresponding text field(s) is(are) used — Does not apply otherwise	Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group.	a2
	e	Image of Document	C	At least one, among these three fields, must be present: —  —  —  (see Short Description of Supporting Document in box 5a and Reference of Supporting Document in box 5c)
	f	Supporting Document Type	C	At least one, among these three fields, must be present: —  —  —  (see Short Description of Supporting Document in box 5a, Reference of Supporting Document in box 5c and Image of Document in box5e)	(see code list 15 in Annex II)	n..4
A	B	C	D	E	F	G
---	---	---	---	---	---	---
1	ATTRIBUTES	R
	a	Message Type	R		The possible values are: 1 = Validated document	n1
	b	Date and Time of Validation of Control Report	C	— ‘R’ after successful validation — Does not apply otherwise		dateTime
2	CONTROL REPORT HEADER	R
	a	Control Report Reference	R		(see Code list 2 in Annex II)	an16
2.1	CONTROL OFFICE	R
	a	Control Office Reference Number	O		(see Code list 5 in Annex II to Regulation (EC) No 684/2009)	an8
	b	Member State Code	C	For 2.1 b, c, d, e, f, and g: — ‘R’ except for , which is ‘O’, if is not given — Does not apply otherwise (see Control Office Reference Number in box 2.1a)	A Member State identified by a Member State Code in Code list 3 of Annex II to Regulation (EC) No 684/2009.	a2
	c	Control Office Name	C		an..35
	d	Street Name	C		an..65
	e	Street Number	C		an..11
	f	Postcode	C		an..10
	g	City	C		an..50
	h	Phone Number	C	For 2.1 h, i and j: If is not given, at least one of the following three attributes must be present: —  —  —  — otherwise, none of the three attributes are applicable (see Control Office Reference Number in box 2.1a)		an..35
	i	Fax Number	C		an..35
	j	Email Address	C		an..70
	k	NAD_LNG	C	‘R’ if the corresponding free text field(s) is (are) used	Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group.	a2
3	EXCISE MOVEMENT e-AD	C	One of the or data groups must be present
	a	ARC	R		(see Code list 2 in Annex II to Regulation (EC) No 684/2009)	an21
	b	Sequence Number	R		The value of the Data Item must be greater than zero.	n..2
4	OTHER ACCOMPANYING DOCUMENT	C	One of the or data groups must be present
	a	Other Accompanying Document Type	R		The possible values are: 0 = Other 2 = SAAD	n1
	b	Short Description of Other Accompanying Document	C	‘R’ if is ‘Other’ It doesn’t apply otherwise		an…350
	c	Short Description of Other Accompanying Document_LNG	C	— ‘R’ if the corresponding text field(s) is (are) used — Does not apply otherwise	Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group.	n2
	d	Other Accompanying Document Number	R			an…350
	e	Other Accompanying Document Date	R			date
	f	Image of Other Accompanying Document	O
	g	Member State of Dispatch	R		A Member State identified by a Member State Code in Code list 3 of Annex II to Regulation (EC) No 684/2009.	a2
	h	Member State of Destination	R		A Member State identified by a Member State Code in Code list 3 of Annex II to Regulation (EC) No 684/2009.	a2
4.1	TRADER Person Involved in Movement	O			9x
	a	Trader Excise Number	C	At least one of the following attributes must be present: —  —  —	An existing identifier (Excise Number) in the set of or in the set of . (see Code list 1 in Annex II to Regulation (EU) No 612/2013)	an13
	b	Trader Identification	C	At least one of the following attributes must be present: —  —  —	A VAT number or any other National number.	an16
	c	Trader Name	C	At least one of the following attributes must be present: —  —  —	—	an..182
	d	Trader Person Type	O		The possible values are the following: 1 = Consignor 2 = Consignee 3 = Tax representative 4 = Vendor 5 = Liable person 6 = Customer private individual	n..2
	e	Member State Code	C	‘R’ if is given AND and is not given. It doesn’t apply otherwise	(see Code list 3 in Annex II to Regulation (EC) No 684/2009)	a2
	f	Street Name	O			an..65
	g	Street Number	O			an..11
	h	Postcode	O			an..10
	i	City	O			an..50
	j	NAD_LNG	C	— ‘R’ if the corresponding text field(s) is (are) used — Does not apply otherwise	Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group.	a2
	k	Phone Number	O			an..35
	m	Email Address	O			an..70
4.2	GOODS ITEM	O			999x
	a	Description of the Goods	O			an..55
	b	CN Code	C	— ‘R’ if is not present in the data group — Does not apply otherwise (see box4 and 4f)	The value of the Data Item must be greater than zero.	n8
	c	Commercial Description of the Goods	O			an..999
	d	Additional code	O			an..35
	e	Quantity	C	— ‘R’ if is not present in the data group — Does not apply otherwise (see box4 and 4f)	The value of the Data Item must be greater than zero.	n..15,3
	f	Unit of Measure Code	C	— ‘R’ if is not present in the data group — Does not apply otherwise (see box4 and 4f)	(See Annex II to Regulation (EC) No 684/2009, Code list 12)	n..2
	g	Gross Weight	O		The Gross Weight must be equal to or higher than Net Weight. The value of the Data Item must be greater than zero.	n..15,2
	h	Net Weight	O		The Gross Weight must be equal to or higher than Net Weight. The value of the Data Item must be greater than zero.	n..15,2
4.3	MEANS OF TRANSPORT	C	— ‘R’ if is not present in the data group — Does not apply otherwise (see box4 and 4f)
	a	Trader Name	R			an..182
	b	Street Name	R			an..65
	c	Street Number	O			an..11
	d	Transporter Country	R		Provide a ‘Country Code’ listed in Code list 4 of Annex II to Regulation (EC) No 684/2009, but not listed in Code list 3 of Annex II to Regulation (EC) No 684/2009 and except ‘Country Cod e ’‘GR’.	a2
	e	Postcode	R			an..10
	f	City	R			an..50
	g	Transport Mode Code	R		Provide the mode of transport using the codes in Code list 7 of Annex II to Regulation (EC) No 684/2009.	n..2
	h	ACO_Complementary Information	C	— ‘R’ if is ‘Other’ — Does not apply otherwise (see box 4.3 g)		an..999
	i	ACO_Complementary Information_LNG	C	— ‘R’ if the corresponding text field(s) is (are) used — Does not apply otherwise	Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group.	a2
	j	Registration	R			an..35
	k	Country of Registration	R		Provide a ‘Country Code’ listed in Code list 4 of Annex II to Regulation (EC) No 684/2009, but not listed in Code list 3 of Annex II to Regulation (EC) No 684/2009 and except ‘Country Cod e’‘ GR’.	a2
5	CONTROL REPORT	R
	a	Date of Control	R			date
	b	Place of Control	R			an..350
	c	Place of Control_LNG	R		Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group.	a2
	d	Control Type	R		The possible values are: 1 = Physical control 2 = Documentary control	n1
	e	Reason for Control	R		The possible values are: 0 = Other reason 1 = Control started at random 2 = Event signalled 3 = Request for assistance received 4 = Request from another office 5 = Alert received	n1
	f	Complementary Origin Reference	O			an..350
	g	Complementary Origin Reference_LNG	C	— ‘R’ if the corresponding text field is used — Does not apply otherwise	Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group.	a2
	h	Control Officer Identity	R			an..350
	i	Control Officer Identity_LNG	R		Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group.	a2
	j	Global Control Conclusion	R		The possible values are: 1 = Satisfactory 2 = Minor discrepancies found 3 = Interruption recommended 4 = Intention to make claim under Article 10 of Council Directive 2008/118/EC 5 = Allowable loss detected, in relation to Article 7(4) of Council Directive 2008/118/EC	n1
	k	Control at Arrival Required	R		The possible values are: 0 = No or False 1 = Yes or True	n1
	l	Flag	R		The possible values are: 0 = No or False 1 = Yes or True	n1
	m	Comments	O			an..350
	n	Comments_LNG	C	— ‘R’ if the corresponding text field(s) is(are) used — Does not apply otherwise	Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group.	a2
5.1	PERFORMED CONTROL ACTION	R			99x
	a	Performed Control Action	R		The possible values are: 0 = Other control action 1 = Verified counted packs 2 = Unloaded 3 = Opened packs 4 = Annotated paper copy of documents (e.g. SAAD) 5 = Counting 6 = Sampling 7 = Administrative control 8 = Goods weighted/measured 9 = Random check 10 = Control of records 11 = Compare documents presented with e-AD	n..2
	b	Other Control Action	C	— ‘R’ if is ‘0’ — Does not apply otherwise (see Performed Control Action in box 5.1a)		an..350
	c	Other Control Action_LNG	C	— ‘R’ if the corresponding text field(s) is(are) used — Does not apply otherwise	Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group.	a2
5.2	SUPPORTING EVIDENCE	C	— ‘R’ if is ‘2’ — ‘O’ otherwise (see Reason for Control in box 5e)		9x
	a	Issuing Authority	O			an..35
	b	Issuing Authority_LNG	C	— ‘R’ if the corresponding text field(s) is(are) used — Does not apply otherwise	Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group.	a2
	c	Evidence Type Code	R		(see Code list 6 in Annex II)	n..2
	d	Evidence Type Complement	C	— ‘R’ if is ‘Other’ — Does not apply otherwise (see Evidence Type Code in box 5.2c)		an..350
	e	Evidence Type Complement_LNG	C	— ‘R’ if the corresponding text field(s) is(are) used — Does not apply otherwise	Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group.	a2
	f	Reference of Evidence	O			an..350
	g	Reference of Evidence_LNG	C	— ‘R’ if the corresponding text(s) field is(are) used — Does not apply otherwise	Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group.	a2
	h	Image of Evidence	O
5.3	UNSATISFACTORY REASON	O			9x
	a	Unsatisfactory Reason Code	R		(see Code list 12 in Annex II)	n..2
	b	Complementary Information	C	— ‘R’ if is ‘Other’ — Does not apply otherwise (see Unsatisfactory Reason Code in box 5.3a)		an..350
	c	Complementary Information_LNG	C	— ‘R’ if the corresponding text field(s) is(are) used — Does not apply otherwise	Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group.	a2
5.4	TRANSPORT DETAILS	O			99x
	a	Transport Unit Code	R		(see Code list 7 in Annex II to Regulation (EC) No 684/2009)	n..2
	b	Identity of Transport Units	C	— ‘R’ if is not ‘Fixed transport installations’ — Does not apply otherwise (see Transport Unit Code in box 5.4a)		an..35
	c	Identity of Commercial Seal	O			an..35
	d	Seal Information	O			an..350
	e	Seal Information_LNG	C	— ‘R’ if the corresponding text field(s) is(are) used — Does not apply otherwise	Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group.	a2
	f	Complementary Information	O			an..350
	g	Complementary Information_LNG	C	— ‘R’ if the corresponding text field(s) is(are) used — Does not apply otherwise	Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group.	a2
5.5	CONTROL REPORT Body	O			99x
	a	Body Record Unique Reference	C	— ‘R’ if data group is present — Does not apply otherwise	This value refers to the of the e-AD Body of the associated e-AD and must be unique within the message. The value of the Data Item must be greater than zero.	n..3
	b	Description of the Goods	C	— ‘O’ if the data group is present — Does not apply otherwise	—	an..55
	c	CN Code	C	— ‘R’ if the data group is present — Does not apply otherwise	The value of the Data Item must be greater than zero.	n8
	d	Additional code	C	— ‘O’ if the data group is present — Does not apply otherwise	—	an..35
	e	Indicator of Shortage or Excess	O		The possible values are: S = Shortage E = Excess	a1
	f	Observed Shortage or Excess	C	— ‘R’ if is given — Does not apply otherwise (see Indicator of Shortage or Excess in box 5.5e)	The value of the Data Item must be greater than zero.	n..15,3
	g	Comments	O			an..350
	h	Comments_LNG	C	— ‘R’ if the corresponding text field(s) is(are) used — Does not apply otherwise	Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group.	a2
5.5.1	UNSATISFACTORY REASON	O			9x
	a	Unsatisfactory Reason Code	R		(see Code list 12 in Annex II)	n..2
	b	Complementary Information	C	— ‘R’ if is ‘Other’ — ‘O’ otherwise (see Indicator of Unsatisfactory Reason Code in box 5.5.1a)		an..350
	c	Complementary Information_LNG	C	— ‘R’ if the corresponding text field(s) is(are) used — Does not apply otherwise	Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group.	a2
A	B	C	D	E	F	G
---	---	---	---	---	---	---
1	ATTRIBUTES	R
	a	Message Type	R		The possible values are: 1 = Initial submission 3 = Validated document	n1
	b	Date and Time of Validation of Event Report	C	— ‘R’ after successful validation, — Does not apply otherwise	—	dateTime
2	EVENT REPORT HEADER	R
	a	Event Report Number	C	— ‘R’ if is ‘3’ — Does not apply otherwise (see Message Type in box 1a)	(see Code list 2 in Annex II)	an16
	b	MS of Submission Event Report Reference	C	— ‘R’ if is ‘1’ or ‘3’ and the MS of submission is different from the MS of event — ‘O’ if is ‘1’ or ‘3’ and the MS of submission is the MS of event — Does not apply otherwise (see Message Type in box 1a)	The format of	an..35
	c	ARC	R		(see Code list 2 in Annex II to Regulation (EC) No 684/2009)	an21
	d	Sequence Number	R		The value of the data element must be greater than zero.	n..2
3	OTHER ACCOMPANYING DOCUMENT	C	One of the or data groups must be present
	a	Other Accompanying Document Type	R		The possible values are: 0 = Other 2 = SAAD	n1
	b	Short Description of Other Accompanying Document	C	— ‘R’ if is ‘Other’ — It doesn’t apply otherwise		an..350
	c	Short Description of Other Accompanying Document_LNG	C	— ‘R’ if the corresponding text field(s) is (are) used — Does not apply otherwise		a2
	d	Other Accompanying Document Number	R			an..350
	e	Other Accompanying Document Date	R			date
	f	Image of Other Accompanying Document	O
	g	Member State of Dispatch	R		A Member State identified by a Member State Code in Code list 3 of Annex II to Regulation (EC) No 684/2009.	a2
	h	Member State of Destination	R		A Member State identified by a Member State Code in Code list 3 of Annex II to Regulation (EC) No 684/2009.	a2
3.1	TRADER Person Involved in Movement	O			9x
	a	Trader Excise Number	C	— At least one of the following attributes must be present: —  —  —	An existing identifier (Excise Number) in the set of or in the set of . (see Code list 1 in Annex II to Regulation (EU) No 612/2013)	an13
	b	Trader Identification	C	— At least one of the following attributes must be present: —  —  —	A VAT number or any other National number.	an16
	c	Trader Name	C	— At least one of the following attributes must be present: —  —  —	—	an..182
	d	Trader Person Type	O		The possible values are the following: 1 = Consignor 2 = Consignee 3 = Tax representative 4 = Vendor 5 = Liable person 6 = Customer private individual	n..2
	e	Member State Code	C	— ‘R’ if is given AND and is not given. — It doesn’t apply otherwise	(see Code list 3 in Annex II to Regulation (EC) No 684/2009)	a2
	f	Street Name	O			an..65
	g	Street Number	O			an..11
	h	Postcode	O			an..10
	j	NAD_LNG	C	— ‘R’ if the corresponding text field(s) is (are) used — Does not apply otherwise	Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group.	a2
	k	Phone Number	O			an..35
	l	Fax Number	O			an..35
	m	Email Address	O			an..70
3.2	GOODS ITEM	O			999x
	a	Description of the Goods	O			an..55
	b	CN Code	C	— ‘R’ if is not present in the data group — Does not apply otherwise (see box 3 and 3f)	The value of the Data Item must be greater than zero.	n8
	c	Commercial Description of the Goods	O			an..999
	d	Additional code	O			an..35
	e	Quantity	C	— ‘R’ if is not present in the data group — Does not apply otherwise (see box3 and 3f)	The value of the Data Item must be greater than zero.	n..15,3
	f	Unit of Measure Code	C	— ‘R’ if is not present in the data group — Does not apply otherwise (see box3 and 3f)	(See Annex II to Regulation (EC) No 684/2009, Code list 12)	n..2
	g	Gross Weight	O		The Gross Weight must be equal to or higher than Net Weight. The value of the Data Item must be greater than zero.	n..15,2
	h	Net Weight	O		The Gross Weight must be equal to or higher than Net Weight. The value of the Data Item must be greater than zero.	n..15,2
3.3	MEANS OF TRANSPORT	C	— ‘R’ if is not present in the data group — Does not apply otherwise (see box3 and 3f)
	a	Trader Name	R			an..182
	b	Street Name	R			an..65
	c	Street Number	O			an..11
	d	Transporter Country	R		Provide a ‘Country Code’ listed in Code list 4 of Annex II to Regulation (EC) No 684/2009, but not listed in Code list 3 of Annex II to Regulation (EC) No 684/2009 and except ‘Country Code’‘GR’.	a2
	e	Postcode	R			an..10
	f	City	R			an..50
	g	Transport Mode Code	R		Provide the mode of transport using the codes in Code list 7 of Annex II to Regulation (EC) No 684/2009.	n..2
	h	ACO_Complementary Information	C	— ‘R’ if is ‘Other’ — Does not apply otherwise (see box 3.3 g)		an..999
	i	ACO_Complementary Information_LNG	C	— ‘R’ if the corresponding text field(s) is (are) used — Does not apply otherwise	Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group.	a2
	j	Registration	R			an..35
	k	Country of Registration	R		Provide a ‘Country Code’ listed in Code list 4 of Annex II to Regulation (EC) No 684/2009, but not listed in Code list 3 of Annex II to Regulation (EC) No 684/2009 and except ‘Country Code’‘GR’.	a2
4	EVENT REPORT	R
	a	Date of Event	R			date
	b	Place of Event	R			an..350
	c	Place of Event_LNG	C	— ‘R’ if the corresponding text field is used — Does not apply otherwise	Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group.	a2
	d	Excise Officer Identification	O			an..35
	e	Submitting Person	R			an..35
	f	Submitting Person Code	R		(see Code list 10 in Annex II)	n..2
	g	Submitting Person Complement	C	— ‘R’ if is ‘Other’ — ‘O’ otherwise (see Submitting Person Code in box 4f)		an..350
	h	Submitting Person Complement_LNG	C	— ‘R’ if the corresponding text field(s) is(are) used — Does not apply otherwise	Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group.	a2
	i	Changed Transport Arrangement	O		The possible values are: 1 = Consignor 2 = Consignee 3 = Owner of goods 4 = Other	n1
	j	Comments	O			an..350
	k	Comments_LNG	C	— ‘R’ if the corresponding text field(s) is(are) used — Does not apply otherwise	Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group.	a2
5	EVIDENCE OF EVENT	O			9x
	a	Issuing Authority	O			an..35
	b	Issuing Authority_LNG	C	— ‘R’ if the corresponding text field(s) is(are) used — Does not apply otherwise	Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group.	a2
	c	Evidence Type Code	R		(see Code list 6 in Annex II)	n..2
	d	Evidence Type Complement	C	— ‘R’ is ‘Other’ — Does not apply otherwise (see Evidence Type Code in box 5c)		an..350
	e	Evidence Type Complement_LNG	C	— ‘R’ if the corresponding text field(s) is(are) used — Does not apply otherwise	Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group.	2
	f	Reference of Evidence	R			an..350
	g	Reference of Evidence_LNG	R		Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group.	a2
	h	Image of Evidence	O
6	TRADER New Transport Arranger	C	— Does not apply if is ‘1’, ‘2’, or is not used — ‘R’ otherwise (see Changed Transport Arrangement in box 4i)
	a	VAT Number	O			an..14
	b	Trader Name	R			an..182
	c	Street Name	R			an..65
	d	Street Number	O			an..11
	e	Postcode	R			an..10
	f	City	R			an..50
	g	NAD_LNG	R		Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group.	a2
7	TRADER New Transporter	O
	a	VAT Number	O			an..14
	b	Trader Name	R			an..182
	c	Street Name	R			an..65
	d	Street Number	O			an..11
	e	Postcode	R			an..10
	f	City	R			an..50
	g	NAD_LNG	R		Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group.	a2
8	TRANSPORT DETAILS	O			99x
	a	Transport Unit Code	R		(see Code list 7 in Annex II to Regulation (EC) No 684/2009)	n..2
	b	Identity of Transport Units	C	— Does not apply if is ‘Fixed transport installations’. — ‘R’ otherwise (see Transport Unit Code in box 8a)		an..35
	c	Identity of Commercial Seal	O			an..35
	d	Seal Information	O			an..350
	e	Seal Information_LNG	C	— ‘R’ if the corresponding text field(s) is(are) used — Does not apply otherwise	Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group.	a2
	f	Complementary Information	O			an..350
	g	Complementary Information_LNG	C	— ‘R’ if the corresponding text field(s) is(are) used — Does not apply otherwise	Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group.	a2
9	EVENT REPORT Body	C	— ‘O’ if is used, or is used, or is used — ‘R’ otherwise (see TRADER New Transport Arranger in 6, TRADER New Transport in 7, and TRANSPORT DETAILS in 8)		99x
	a	Event Type Code	R		(see Code list 14 in Annex II)	n..2
	b	Associated Information	C	— ‘R’ if is ‘0’ — ‘O’ otherwise (see Event Type Code in box 9a)		an..350
	c	Associated Information_LNG	C	— ‘R’ if the corresponding text field(s) is(are) used — Does not apply otherwise	Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group.	a2
	d	Body Record Unique Reference	C	— ‘R’ if data group is present — Does not apply otherwise	This value refers to the of the e-AD Body of the associated e-AD and must be unique within the message. The value of the Data Item must be greater than zero.	n..3
	e	Description of the Goods	C	— ‘O’ if the data group is present — Does not apply otherwise		an..55
	f	CN Code	C	— ‘R’ if the data group is present — Does not apply otherwise	The value of the Data Item must be greater than zero.	n8
	g	Additional code	C	— ‘O’ if the data group is present — Does not apply otherwise		an..35
	h	Indicator of Shortage or Excess	C	For 9h and 9i: — ‘R’ if or or	The possible values are: S = Shortage E = Excess	a1
	i	Observed Shortage or Excess	C	The value of the Data Item must be greater than zero.	n..15,3
A	B	C	D	E	F	G
---	---	---	---	---	---	---
1	ATTRIBUTES	R
	a	ARC	R		(see Code list 2 in Annex II to Regulation (EC) No 684/2009)	an21
	b	Date and Time of Issuance	R			dateTime
	c	Reason for Interruption Code	R		(see Code list 13 in Annex II)	n..2
	d	Excise Office Reference Number	R		(see Code list 5 in Annex II to Regulation (EC) No 684/2009)	an8
	e	Excise Officer Identification	O			an..35
	f	Complementary Information	C	— ‘R’ if is ‘Other’ — ‘O’ otherwise (see Reason for Interruption Code in box 1c)		an..350
	g	Complementary Information_LNG	C	— ‘R’ if the corresponding text field(s) is(are) used — Does not apply otherwise	Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group	a2
2	CONTROL REPORT Reference	O			9x
	a	Control Report Reference	R		(see Code list 2 in Annex II) A ‘Control Report’ message exists in the system (including the case that it is encapsulated in a received ‘Movement History’ message) having the same and with that of the submitted message. (see ARC in box 1a)	an16
3	EVENT REPORT Reference	O			9x
	a	Event Report Number	R		(see Code list 2 in Annex II) An ‘Event Report’ message exists in the system (including the case that it is encapsulated in a received ‘Movement History’ message) having the same and with that of the submitted message (see ARC in box 1a)	an16
A	B	C	D	E	F	G
---	---	---	---	---	---	---
1	ATTRIBUTES	R
	a	Date and Time of Validation of Alert or Rejection	C	— R if corresponding field is validated — Does not apply otherwise		dateTime
2	EXCISE MOVEMENT e-AD	R
	a	ARC	R		Provide the ARC of the e-AD. (see Code list 2 in Annex II to Regulation (EC) No 684/2009)	an21
	b	Sequence Number	R		The value of the data element must be greater than zero.	n..2
3	TRADER Consignee	C	‘R’, except for message type ‘2 — Submission for export with local clearance’ or for Destination Type Code 8
	a	Trader Identification	C	— ‘R’ if is in: — — ‘Destination — Tax warehouse’ — ‘Destination — Registered consignee’ — ‘Destination — Temporary registered consignee’ — ‘Destination — Direct delivery’ — ‘O’ if is ‘Destination — Export’ — Does not apply otherwise	The possible values of are described in the following table:	an..16
Destination Type Code	TRADER CONSIGNEE. Trader Identification	TRADER Place of Delivery. Trader Identification
1 -  Destination — Tax warehouse	Excise number (1)	Tax Warehouse Reference (Excise Number) (2)
2 -  Destination — Registered consignee	Excise number (3)	Any identification (4)
3 -  Destination — Temporary registered consignee	Temporary authorisation reference (5)	Any identification (6)
4 -  Destination — Direct delivery	Excise number (7)	(Does not apply)
5 -  Destination — Exempted consignee	(Does not apply)	Any identification (8)
6 -  Destination — Export	VAT number (optional)	(The data group does not exist)
8 -  Unknown destination	(Does not apply)	(Does not apply)
(1)  The operator type of the consignee is ‘Authorised warehouse keeper’. An existing identifier in the set of . (2)  An existing identifier in the set of . (3)  The operator type of the consignee is ‘Registered consignee’. An existing identifier in the set of . (4)  For the place of delivery, ‘Any identification’ means: a VAT number or any other identifier; it is optional. (5)  An existing in the set of . (6)  For the place of delivery, ‘Any identification’ means: a VAT number or any other identifier; it is optional. (7)  The operator type of the consignee is either ‘Authorised warehouse keeper’ or ‘Registered consignee’. An existing identifier in the set of . (8)  For the place of delivery, ‘Any identification’ means: a VAT number or any other identifier; it is optional.
(see Code list 1 and Code list 2 in Annex II to Regulation (EU) No 612/2013, if applicable)
	b	EORI Number	C	— ‘O’ if is ‘Destination — Export’ — Does not apply otherwise	Provide the EORI number of the person responsible for lodging the export declaration as set out in Article 21(5) of Directive 2008/118/EC.	an..17
	c	Trader Name	R			an..182
	d	Street Name	R			an..65
	e	Street Number	O			an..11
	f	Postcode	R			an..10
	g	City	R			an..50
	h	NAD_LNG	R		Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group.	a2
4	OFFICE OF DESTINATION	R
	a	Office Reference Number	R		(see Code list 5 in Annex II to Regulation (EC) No 684/2009)	an8
5	ALERT	R
	a	Date of Alert	R			date
	b	e-AD Rejected flag	R		The format of Boolean is digital: ‘0’ or ‘1’ (‘0’ = No or False; ‘1’ = Yes or True).	n1
6	ALERT OR REJECTION OF E-AD REASON Code	C	— ‘R’ if is True — ‘O’ if otherwise		9x
	a	Alert or Rejection of E-AD Reason Code	R		(see Code list 5 in Annex II)	n..2
	b	Complementary Information	C	— ‘R’ if is ‘Other’ — ‘O’ otherwise (see Alert or Rejection of E-AD Reason Code in box 6a)		an..350
	c	Complementary Information_LNG	C	— ‘R’ if the corresponding text field(s) is(are) used — Does not apply otherwise	Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group.	a2
A	B	C	D	E	F	G
---	---	---	---	---	---	---
1	ATTRIBUTE	R
	a	ARC	R		Provide the ARC of the e-AD. (see Code list 2 in Annex II to Regulation (EC) No 684/2009)	an21
	b	Sequence Number	R		Provide the sequence number of the e-AD.	n..2
	c	Manual Closure Request Reason Code	R		(see code list 16 in Annex II)	n1
	d	Manual Closure Reason Complement	C	— ‘R’ if is ‘Other’ — ‘O’ otherwise		an..999
	e	Manual Closure Reason Complement_LNG	C	— ‘R’ if the corresponding text field is used — Does not apply otherwise	Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group.	a2
2	SUPPORTING DOCUMENTS	O			9x
	a	Short Description of Supporting Document	C	— ‘R’ if is ‘Other’ — Does not apply otherwise		an..999
	b	Short Description of Supporting Document_LNG	C	— ‘R’ if the corresponding text field(s) is(are) used — Does not apply otherwise	Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group.	a2
	c	Reference of Supporting Document	C	At least one, among these three fields, must be present: —  —  —  (see Image of Document in box 2e and Supporting Document Type in box 2f)		an..999
	d	Reference of Supporting Document_LNG	C	— ‘R’ if the corresponding text field(s) is(are) used — Does not apply otherwise	Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group.	a2
	e	Image of Document	C	At least one, among these three fields, must be present: —  —  —  (see Reference of Supporting Document in box 2c and Supporting Document Type in box 2f)
	f	Supporting Document Type	C	At least one, among these three fields, must be present: —  —  —  (see Reference of Supporting Document in box 2c and Image of Document in box 2e)	(see code list 15 in Annex II)	n..4
3	MANUAL CLOSURE Body	O			999X
	a	Body Record Unique Reference	R		This value refers to the of the e-AD Body of the associated e-AD and must be unique within the message. The value of this data element must be greater than zero.	n..3
	b	Indicator of Shortage or Excess	O		The possible values are: S = Shortage E = Excess	a1
	c	Observed Shortage or Excess	C	— ‘R’ if is given — Does not apply otherwise (see Indicator of Shortage or Excess in box 3b)	The value of the Data Item must be greater than zero.	n..15,3
	d	Excise Product Code	O		(see Code list 11 in Annex II to Regulation (EC) No 684/2009)	an4
	e	Refused Quantity	O		The value of this data element must be greater than zero.	n..15,3
	f	Complementary Information	O			an..350
	g	Complementary Information_LNG	C	— ‘R’ if the corresponding text field is used — Does not apply otherwise	Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group.	a2
A	B	C	D	E	F	G
---	---	---	---	---	---	---
1	ATTRIBUTE	R
	a	ARC	R		Provide the ARC of the e-AD. (see Code list 2 in Annex II to Regulation (EC) No 684/2009)	an21
	b	Sequence Number	R		Provide the sequence number of the e-AD.	n..2
	c	Date of Arrival of Excise Products	O		The date at which the movement ends in accordance with Article 20(2) of Directive 2008/118/EC.	date
	d	Global Conclusion of Receipt	O		The possible values are: 1 = Receipt accepted and satisfactory, 2 = Receipt accepted although unsatisfactory, 3 = Receipt refused, 4 = Receipt partially refused, 21 = Exit accepted and satisfactory, 22 = Exit accepted although unsatisfactory, 23 = Exit refused.	n..2
	e	Complementary Information	O			an..350
	f	Complementary Information_LNG	C	— ‘R’ if the corresponding text field is used — Does not apply otherwise	Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group.	a2
	g	Manual Closure Request Reason Code	R		(see code list 16 in Annex II)	n1
	h	Manual Closure Reason Complement	C	— ‘R’ if is ‘Other’ — ‘O’ otherwise		an..999
	i	Manual Closure Reason Complement_LNG	C	— ‘R’ if the corresponding text field is used — Does not apply otherwise	Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group.	a2
	j	Manual Closure Request Accepted	R		The format of Boolean is digital: ‘0’ or ‘1’ (‘0’ = No or False; ‘1’ = Yes or True).	n1
	k	Manual Closure Rejection Reason Code	C	— ‘R’ if is ‘0’ — Does not apply otherwise	(see code list 17 in Annex II)	n1
	l	Manual Closure Rejection Complement	C	— ‘R’ if is ‘Other’ — ‘O’ otherwise		an..999
	m	Manual Closure Rejection Complement_LNG	C	— ‘R’ if the corresponding text field is used — Does not apply otherwise	Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group.	a2
2	SUPPORTING DOCUMENTS	O			9x
	a	Short Description of Supporting Document	C	— ‘R’ if is ‘Other’ — Does not apply otherwise		an..999
	b	Short Description of Supporting Document_LNG	C	— ‘R’ if the corresponding text field is used — Does not apply otherwise	Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group.	a2
	c	Reference of Supporting Document	C	At least one, among these three fields, must be present: —  —  —  (see Image of Document in box 2e and Supporting Document Type in box 2f)		an..999
	d	Reference of Supporting Document_LNG	C	— ‘R’ if the corresponding text field(s) is(are) used — Does not apply otherwise	Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group.	a2
	e	Image of Document	C	At least one, among these three fields, must be present: —  —  —  (see Reference of Supporting Document in box 2c and Supporting Document Type in box 2f)
	f	Supporting Document Type	C	At least one, among these three fields, must be present: —  —  —  (see Reference of Supporting Document in box 2c and Image of Document in box 2e)	(see code list 15 in Annex II)	n..4
3	MANUAL CLOSURE Body	O			999X
	a	Body Record Unique Reference	R		This value refers to the of the e-AD Body of the associated e-AD and must be unique within the message. The value of this data element must be greater than zero.	n..3
	b	Indicator of Shortage or Excess	O		The possible values are: S = Shortage E = Excess	a1
	c	Observed Shortage or Excess	C	— ‘R’ if is given — Does not apply otherwise (see Indicator of Shortage or Excess in box 3b)	The value of the Data Item must be greater than zero.	n..15,3
	d	Excise Product Code	O		(see Code list 11 in Annex II to Regulation (EC) No 684/2009)	an4
	e	Refused Quantity	O		The value of this data element must be greater than zero.	n..15,3
	f	Complementary Information	O			an..350
	g	Complementary Information_LNG	C	— ‘R’ if the corresponding text field is used — Does not apply otherwise	Provide the language code presented in Annex II to Regulation (EC) No 684/2009, Code list 1 to define the language used in this data group.	a2

ANNEX II

Lists of codes

Field	Content	Field type	Examples
1	Year	Numeric 2	5
2	Identifier of the MS where the message was initially submitted	Alphabetic 2	ES
3	Free nationally assigned, code	Alphanumeric 21	ARC
4	Complement	Alphanumeric 3	123

Field 1 is last two digits of year.

Field 2 is taken from the list of (see Code list 3 in Annex II to Regulation (EC) No 684/2009).

Field 3 must be filled with a nationally assigned identifier. In certain cases, for the Follow-Up Correlation ID it can be an ARC.

Field 4 gives a complement to field 3 to make together a unique identifier (for example, in the case of Follow-Up Correlation ID where several follow-up messages deal with the same ARC.)

Code list 2: Event Report Number/Control Report Reference

Field	Content	Field type	Examples
1	Identifier of the MS where the report is validated	Alphabetic 2	ES
2	Nationally assigned, unique code	Alphanumeric 13	2005YTE17UIC2
3	Check Digit	Numeric 1	9

Field 1 is taken from the list of (see Code list 3 in Annex II to Regulation (EC) No 684/2009)

Field 2 must be filled with a unique identifier per report. The way this field is used is under MSAs' responsibility, but each report must have a unique number. It is possible, but not mandatory, that it contains the year when the report was initially submitted (as suggested in the example).

Field 3 gives the Check Digit for the whole identifier, which will help detect an error when keying this identifier.

Code	Description
1	Information not available
2	Confidential information
3	Ongoing investigation

Code list 4: Refusal Reasons

Code	Description
0	Other
1	The enquiry or information requested could not be authorised under the laws or administrative practices of the requested Member State for its own use (e.g. Confidential information)
2	(reserved)
3	Disclosure contrary to the public policy of the state — The provision of information would lead to the disclosure of a commercial, industrial or professional secret or of a commercial process, or where its disclosure would be contrary to public policy
4	A judicial authority of the requested Member State has refused to allow the transfer of information under its control
5	The request concerns information that is no longer available due to national rules of data retention (5 years or more minimum)
6	The requesting authority has not exhausted the usual sources of information which it could have used in the circumstances
7	The number and the nature of the requests for information made by the requesting authority within a specific period impose a disproportionate administrative burden on that requested authority
8	The requested Member State is unable, for legal reasons, to provide similar information
9	The consignor has not exhausted all the means available to him to obtain proof that the movement of excise goods between Member States has ended
10	No check performed
11	Out of scope of 389/2012 (e.g. Naples II)
Code	Description
---	---
0	Other
1	The received e-AD does not concern the recipient
2	The excise product(s) does(do) not match with the order
3	The quantity(ies) does(do) not match with the order

Code list 6: Evidence Types

Code	Description
0	Other
1	Accident
2	Goods destroyed
3	Goods stolen
6	Vehicle and goods stolen
7	Transhipment of goods
Code	Description
---	---
0	Other
1	Cancelled commercial transaction
2	Pending commercial transaction
3	Ongoing investigation by officials
4	Bad weather conditions
5	Strike
6	Accident

Code list 8: Request Reasons

Code	Description
0	Other
1	Report of Receipt/Export not returned to consignor
2	Excesses or shortages stated at arrival of good
4	Submission of an e-AD was rejected because the consignee record of SEED did not match — the request is to ask for more information
6	Have goods/quantities specified on e-AD been entered in consignee's stock records?
7	Check that goods have actually left EU (date on which export certified by customs)
8	Placing of goods under a suspensive customs procedure (export warehouse, victualling warehouse, outward processing, etc.)
9	Reimbursement of excise duty requested
10	Spot checks
11	Copy 3 not returned to Consignor
12	Reverse of Copy 3 endorsed to show excesses or losses
13	Certification of Receipt Incomplete
14	Consignee's Excise Number not in SEED
15	Particular Deleted/Overwritten without official Endorsement
16	Request for Manual closure
17	Export Status Unknown
18	Request for Interruption of a movement
19	Perform interview of authorised representative
20	Fallback document
21	Two e-ADs were created for the same consignment
22	Clarification regarding type or quantity of goods
23	Receipt of goods were rejected/refused
24	Ongoing excise investigation
25	Suspicions of irregularity

Code list 9: Request Actions

Code	Description
0	Other
2	Administrative control
3	Physical control
4	Confirm entry in trader's records
5	Confirm quantity received
6	Confirm authorisation of trader
7	Confirm the particulars in Box No(s)
11	Confirm identity of the carrier and the number of the vehicle
12	Confirm payment of duty
14	Confirm quantity dispatched
15	Confirm type of goods dispatched
16	Confirm Authenticity of Excise official stamp
17	Confirm Authenticity of Company's Stamp and Trader's signature
18	Confirm Trader's Authorisation and SEED Data
19	Manual closure
20	Hearing of authorised representative (e.g. interview of company manager)
21	Provide reason for shortage
22	Confirm shortage/excess/differences
23	Provide proof that the movement of excise goods has ended
24	Confirm purpose of goods or next purchaser of goods
25	Please see attached request
26	Follow-up measure needs to be taken from the Consignor
27	Correction required in Export declaration
28	Confirm the content of the Export Declaration
29	Inform if the movement has already been released by Customs
30	Provide Export MRN
Code	Description
---	---
0	Other
1	Consignor
2	Consignee
3	Transporter
4	Excise officer
5	Other official

Code list 11: Administrative Cooperation Action Not Possible Reasons

Code	Description
0	Other
1	Missing information
2	Confidential information
3	Missing time
4	Deep investigation on economic operator ongoing, short-term answer not possible
5	Trader could not be contacted
6	Missing trader
Code	Description
---	---
0	Other
1	Excess
2	Shortage
3	Goods damaged
4	Broken seal
5	Reported by ECS
7	Quantity higher than the one on the temporary authorisation
Code	Description
---	---
0	Other
1	Fraud suspected
2	Goods destroyed
3	Goods lost or stolen
4	Interruption requested at control
Code	Description
---	---
0	Other
1	Accident
2	Goods destroyed
3	Goods stolen
6	Vehicle and goods stolen
7	Transhipment of goods

Code list 15: Type of Document

Code	Description
0	Other
1	e-AD
2	SAAD
3	Invoice
4	Delivery note
5	CMR
6	Bill of lading
7	Way Bill
8	Contract
9	Trader's Application
10	Official record
11	Request
12	Answer
13	Fallback documents, Fallback Printout
14	Photo
15	Export Declaration
16	Anticipated Export Record
17	Exit Results
18	SAD (Single Administrative Document)
	Any TARIC code used in ‘box 44’ of the SAD
Code list 16: Manual Closure Request Reasons
---	---
Code	Description
0	Other
1	Export closed but no IE518 available
2	Consignee no longer connected to EMCS
3	Exempted consignee
4	Exit confirmed but no IE829 submitted (IE818 out of sequence)
5	No movement but cancellation no longer possible
6	Multiple issuances of e-ADs for a single movement
7	e-AD does not cover actual movement
8	Erroneous report of receipt
9	Erroneous rejection of an e-AD
Code list 17: Manual Closure Rejection Reasons
---	---
Code	Description
0	Other
1	Evidence provided does not justify manual closure
2	Request Reason provided does not justify manual closure

(¹) Commission Implementing Regulation (EU) No 612/2013 of 25 June 2013 on the operation of the register of economic operators and tax warehouses, related statistics and reporting pursuant to Council Regulation (EU) No 389/2012 on administrative cooperation in the field of excise duties (OJ L 173, 26.6.2013, p. 9).

(²) Commission Regulation (EC) No 684/2009 of 24 July 2009 implementing Council Directive 2008/118/EC as regards the computerised procedures for the movement of excise goods under suspension of excise duty (OJ L 197, 29.7.2009, p. 24).