Legalize / European Union / Implementing Regulation

Commission Implementing Regulation (EU) 2018/1602 of 11 October 2018 amending Annex I to Council Regulation (EEC) No 2658/87 on the tariff and statistical nomenclature and on the Common Customs Tariff

Type Implementing Regulation

Publication 2018-10-31

State In force

Text As published

Department European Commission

Source EUR-Lex

articles 2

This is the act as published. Later amendments are not folded into the text below: each one is a separate act in this repository and an entry in this law's history.

Reform history JSON API

Iron-carbon alloys containing by weight more than 6 % but not more than 30 % of manganese and otherwise conforming to the specification at (a) above.

Alloys in pigs, blocks, lumps or similar primary forms, in forms obtained by continuous casting and also in granular or powder forms, whether or not agglomerated, commonly used as an additive in the manufacture of other alloys or as de-oxidants, de-sulphurising agents or for similar uses in ferrous metallurgy and generally not usefully malleable, containing by weight 4 % or more of the element iron and one or more of the following:

— more than 10 % of chromium,

— more than 30 % of manganese,

— more than 3 % of phosphorus,

— more than 8 % of silicon,

— a total of more than 10 % of other elements, excluding carbon, subject to a maximum content of 10 % in the case of copper.

(d) Steel

Ferrous materials other than those of heading 7203 which (with the exception of certain types produced in the form of castings) are usefully malleable and which contain by weight 2 % or less of carbon. However, chromium steels may contain higher proportions of carbon.

(e) Stainless steel

Alloy steels containing, by weight, 1,2 % or less of carbon and 10,5 % or more of chromium, with or without other elements.

(f) Other alloy steel

Steels not complying with the definition of stainless steel and containing by weight one or more of the following elements in the proportion shown:

— 0,3 % or more of aluminium,

— 0,0008 % or more of boron,

— 0,3 % or more of chromium,

— 0,3 % or more of cobalt,

— 0,4 % or more of copper,

— 0,4 % or more of lead,

— 1,65 % or more of manganese,

— 0,08 % or more of molybdenum,

— 0,3 % or more of nickel,

— 0,06 % or more of niobium,

— 0,6 % or more of silicon,

— 0,05 % or more of titanium,

— 0,3 % or more of tungsten (wolfram),

— 0,1 % or more of vanadium,

— 0,05 % or more of zirconium,

— 0,1 % or more of other elements (except sulphur, phosphorus, carbon and nitrogen), taken separately.

(g) Remelting scrap ingots of iron or steel

Products roughly cast in the form of ingots without feeder-heads or hot tops, or of pigs, having obvious surface faults and not complying with the chemical composition of pig iron, spiegeleisen or ferro-alloys.

(h) Granules

Products of which less than 90 % by weight passes through a sieve with a mesh aperture of 1 mm and of which 90 % or more by weight passes through a sieve with a mesh aperture of 5 mm.

(ij) Semi-finished products

Continuous cast products of solid section, whether or not subjected to primary hot-rolling; and other products of solid section, which have not been further worked than subjected to primary hot-rolling or roughly shaped by forging, including blanks for angles, shapes or sections.

These products are not presented in coils.

(k) Flat-rolled products

Rolled products of solid rectangular (other than square) cross-section, which do not conform to the definition at (ĳ) above in the form of:

— coils of successively superimposed layers, or

— straight lengths, which if of a thickness less than 4,75 mm are of a width measuring at least 10 times the thickness or if of a thickness of 4,75 mm or more are of a width which exceeds 150 mm and measures at least twice the thickness.

Flat-rolled products include those with patterns in relief derived directly from rolling (for example, grooves, ribs, chequers, tears, buttons, lozenges) and those which have been perforated, corrugated or polished, provided that they do not thereby assume the character of articles or products of other headings.

Flat-rolled products of a shape other than rectangular or square, of any size, are to be classified as products of a width of 600 mm or more, provided that they do not assume the character of articles or products of other headings.

(l) Bars and rods, hot-rolled, in irregularly wound coils

Hot-rolled products in irregularly wound coils, which have a solid cross-section in the shape of circles, segments of circles, ovals, rectangles (including squares), triangles or other convex polygons (including ‘flattened circles’ and ‘modified rectangles’, of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). These products may have indentations, ribs, grooves or other deformations produced during the rolling process (reinforcing bars and rods).

(m) Other bars and rods

Products which do not conform to any of the definitions at (ĳ), (k) or (l) above or to the definition of wire, which have a uniform solid cross-section along their whole length in the shape of circles, segments of circles, ovals, rectangles (including squares), triangles or other convex polygons (including ‘flattened circles’ and ‘modified rectangles’, of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel).

These products may:

— have indentations, ribs, grooves or other deformations produced during the rolling process (reinforcing bars and rods),

— be twisted after rolling.

(n) Angles, shapes and sections

Products having a uniform solid cross-section along their whole length which do not conform to any of the definitions at (ĳ), (k), (l) or (m) above or to the definition of wire.

Chapter 72 does not include products of heading 7301 or 7302.

(o) Wire

Cold-formed products in coils, of any uniform solid cross-section along their whole length, which do not conform to the definition of flat-rolled products.

(p) Hollow drill bars and rods

Hollow bars and rods of any cross-section, suitable for drills, of which the greatest external dimension of the cross-section exceeds 15 mm but does not exceed 52 mm, and of which the greatest internal dimension does not exceed one half of the greatest external dimension. Hollow bars and rods of iron or steel not conforming to this definition are to be classified in heading 7304.

1. Ferrous metals clad with another ferrous metal are to be classified as products of the ferrous metal predominating by weight.

1. Iron or steel products obtained by electrolytic deposition, by pressure casting or by sintering are to be classified, according to their form, their composition and their appearance, in the headings of this chapter appropriate to similar hot-rolled products.

Subheading notes

1. In this chapter, the following expressions have the meanings hereby assigned to them:

(a) Alloy pig iron

Pig iron containing, by weight, one or more of the following elements in the specified proportions:

— more than 0,2 % of chromium,

— more than 0,3 % of copper,

— more than 0,3 % of nickel,

— more than 0,1 % of any of the following elements: aluminium, molybdenum, titanium, tungsten (wolfram), vanadium.

(b) Non-alloy free-cutting steel

Non-alloy steel containing, by weight, one or more of the following elements in the specified proportions:

— 0,08 % or more of sulphur,

— 0,1 % or more of lead,

— more than 0,05 % of selenium,

— more than 0,01 % of tellurium,

— more than 0,05 % of bismuth.

Alloy steels containing by weight at least 0,6 % but not more than 6 % of silicon and not more than 0,08 % of carbon. They may also contain by weight not more than 1 % of aluminium but no other element in a proportion that would give the steel the characteristics of another alloy steel.

(d) High-speed steel

Alloy steels containing, with or without other elements, at least two of the three elements molybdenum, tungsten and vanadium with a combined content by weight of 7 % or more, 0,6 % or more of carbon and 3 to 6 % of chromium.

(e) Silico-manganese steel

Alloy steels containing by weight:

— not more than 0,7 % of carbon,

— 0,5 % or more but not more than 1,9 % of manganese, and

— 0,6 % or more but not more than 2,3 % of silicon, but no other element in a proportion that would give the steel the characteristics of another alloy steel.

1. For the classification of ferro-alloys in the subheadings of heading 7202, the following rule should be observed:

A ferro-alloy is considered as binary and classified under the relevant subheading (if it exists) if only one of the alloy elements exceeds the minimum percentage laid down in note 1(c) to this chapter; by analogy, it is considered respectively as ternary or quaternary if two or three alloy elements exceed the minimum percentage.

For the application of this rule, the unspecified ‘other elements’ referred to in note 1(c) to this chapter must each exceed 10 % by weight.

Additional note

1. The following expressions have the meanings hereby assigned to them:

— ‘Electrical’: for the purposes of subheadings 7209 16 10, 7209 17 10, 7209 18 10, 7209 26 10, 7209 27 10, 7209 28 10 and 7211 23 20, flat-rolled products which under a current at 50 Hz and a magnetic flux of 1 T have a watt-loss per kilogram, calculated by the Epstein method, of:

— 2,1 W or less, when their thickness does not exceed 0,20 mm,

— 3,6 W or less, when their thickness is not less than 0,20 mm but less than 0,60 mm,

— 6 W or less, when their thickness is not less than 0,60 mm but not greater than 1,50 mm.

— ‘Tinplate’: for the purposes of subheadings 7210 12 20, 7210 70 10, 7212 10 10 and 7212 40 20, flat-rolled products (of a thickness of less than 0,5 mm) coated with a layer of metal containing, by weight, 97 % or more of tin.

— ‘Tool steel’: for the purposes of subheadings 7224 10 10, 7224 90 02, 7225 30 10, 7225 40 12, 7226 91 20, 7228 30 20, 7228 40 10, 7228 50 20 and 7228 60 20, alloy steels, other than stainless or high-speed steel, containing, by weight, one of the following compositions, with or without other elements:

— less than 0,6 % of carbon

and

0,7 % or more of silicon and 0,05 % or more of vanadium

4 % or more of tungsten,

— 0,8 % or more of carbon

and

0,05 % or more of vanadium,

— more than 1,2 % of carbon

and

not less than 11 % but not more than 15 % of chromium,

— 0,16 % or more but not more than 0,5 % of carbon

and

3,8 % or more but not more than 4,3 % of nickel

and

1,1 % or more but not more than 1,5 % of chromium

and

0,15 % or more but not more than 0,5 % of molybdenum,

— 0,3 % or more but not more than 0,5 % of carbon

and

1,4 % or more but not more than 2,1 % of chromium

and

0,15 % or more but not more than 0,5 % of molybdenum

and

less than 1,2 % of nickel,

— 0,3 % or more of carbon

and

less than 5,2 % of chromium

and

0,65 % or more of molybdenum or 0,4 % or more of tungsten,

— 0,5 % or more but not more than 0,6 % of carbon

and

1,25 % or more but not more than 1,8 % of nickel

and

0,5 % or more but not more than 1,2 % of chromium

and

0,15 % or more but not more than 0,5 % of molybdenum.


CN code	Description	Conventional rate of duty (%)	Supplementary unit
(1)	(2)	(3)	(4)
I. PRIMARY MATERIALS; PRODUCTS IN GRANULAR OR POWDER FORM	I. PRIMARY MATERIALS; PRODUCTS IN GRANULAR OR POWDER FORM
7201	Pig iron and spiegeleisen in pigs, blocks or other primary forms
7201 10	– Non-alloy pig iron containing by weight 0,5 % or less of phosphorus
	– – Containing by weight not less than 0,4 % of manganese
7201 10 11	– – – Containing by weight 1 % or less of silicon	1,7	—
7201 10 19	– – – Containing by weight more than 1 % of silicon	1,7	—
7201 10 30	– – Containing by weight not less than 0,1 % but less than 0,4 % of manganese	1,7	—
7201 10 90	– – Containing by weight less than 0,1 % of manganese	Free	—
7201 20 00	– Non-alloy pig iron containing by weight more than 0,5 % of phosphorus	2,2	—
7201 50	– Alloy pig iron; spiegeleisen
7201 50 10	– – Alloy pig iron containing by weight not less than 0,3 % but not more than 1 % of titanium and not less than 0,5 % but not more than 1 % of vanadium	Free	—
7201 50 90	– – Other	1,7	—
7202	Ferro-alloys
	– Ferro-manganese
7202 11	– – Containing by weight more than 2 % of carbon
7202 11 20	– – – With a granulometry not exceeding 5 mm and a manganese content by weight exceeding 65 %	2,7	—
7202 11 80	– – – Other	2,7	—
7202 19 00	– – Other	2,7	—
	– Ferro-silicon
7202 21 00	– – Containing by weight more than 55 % of silicon	5,7 ¹³	—
7202 29	– – Other
7202 29 10	– – – Containing by weight 4 % or more but not more than 10 % of magnesium	5,7 ¹³	—
7202 29 90	– – – Other	5,7 ¹³	—
7202 30 00	– Ferro-silico-manganese	3,7 ¹³	—
	– Ferro-chromium
7202 41	– – Containing by weight more than 4 % of carbon
7202 41 10	– – – Containing by weight more than 4 % but not more than 6 % of carbon	4	—
7202 41 90	– – – Containing by weight more than 6 % of carbon	4	—
7202 49	– – Other
7202 49 10	– – – Containing by weight not more than 0,05 % of carbon	7 ¹³	—
7202 49 50	– – – Containing by weight more than 0,05 % but not more than 0,5 % of carbon	7 ¹³	—
7202 49 90	– – – Containing by weight more than 0,5 % but not more than 4 % of carbon	7	—
7202 50 00	– Ferro-silico-chromium	2,7	—
7202 60 00	– Ferro-nickel	Free	—
7202 70 00	– Ferro-molybdenum	2,7	—
7202 80 00	– Ferro-tungsten and ferro-silico-tungsten	Free	—
	– Other
7202 91 00	– – Ferro-titanium and ferro-silico-titanium	2,7	—
7202 92 00	– – Ferro-vanadium	2,7	—
7202 93 00	– – Ferro-niobium	Free	—
7202 99	– – Other
7202 99 10	– – – Ferro-phosphorus	Free	—
7202 99 30	– – – Ferro-silico-magnesium	2,7	—
7202 99 80	– – – Other	2,7	—
7203	Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99,94 %, in lumps, pellets or similar forms
7203 10 00	– Ferrous products obtained by direct reduction of iron ore	Free	—
7203 90 00	– Other	Free	—
7204	Ferrous waste and scrap; remelting scrap ingots of iron or steel
7204 10 00	– Waste and scrap of cast iron	Free	—
	– Waste and scrap of alloy steel
7204 21	– – Of stainless steel
7204 21 10	– – – Containing by weight 8 % or more of nickel	Free	—
7204 21 90	– – – Other	Free	—
7204 29 00	– – Other	Free	—
7204 30 00	– Waste and scrap of tinned iron or steel	Free	—
	– Other waste and scrap
7204 41	– – Turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundles
7204 41 10	– – – Turnings, shavings, chips, milling waste, sawdust and filings	Free	—
	– – – Trimmings and stampings
7204 41 91	– – – – In bundles	Free	—
7204 41 99	– – – – Other	Free	—
7204 49	– – Other
7204 49 10	– – – Fragmentised (shredded)	Free	—
	– – – Other
7204 49 30	– – – – In bundles	Free	—
7204 49 90	– – – – Other	Free	—
7204 50 00	– Remelting scrap ingots	Free	—
7205	Granules and powders, of pig iron, spiegeleisen, iron or steel
7205 10 00	– Granules	Free	—
	– Powders
7205 21 00	– – Of alloy steel	Free	—
7205 29 00	– – Other	Free	—
II. IRON AND NON-ALLOY STEEL	II. IRON AND NON-ALLOY STEEL
7206	Iron and non-alloy steel in ingots or other primary forms (excluding iron of heading 7203)
7206 10 00	– Ingots	Free	—
7206 90 00	– Other	Free	—
7207	Semi-finished products of iron or non-alloy steel
	– Containing by weight less than 0,25 % of carbon
7207 11	– – Of rectangular (including square) cross-section, the width measuring less than twice the thickness
	– – – Rolled or obtained by continuous casting
7207 11 11	– – – – Of free-cutting steel	Free	—
	– – – – Other
7207 11 14	– – – – – Of a thickness not exceeding 130 mm	Free	—
7207 11 16	– – – – – Of a thickness exceeding 130 mm	Free	—
7207 11 90	– – – Forged	Free	—
7207 12	– – Other, of rectangular (other than square) cross-section
7207 12 10	– – – Rolled or obtained by continuous casting	Free	—
7207 12 90	– – – Forged	Free	—
7207 19	– – Other
	– – – Of circular or polygonal cross-section
7207 19 12	– – – – Rolled or obtained by continuous casting	Free	—
7207 19 19	– – – – Forged	Free	—
7207 19 80	– – – Other	Free	—
7207 20	– Containing by weight 0,25 % or more of carbon
	– – Of rectangular (including square) cross-section, the width measuring less than twice the thickness
	– – – Rolled or obtained by continuous casting
7207 20 11	– – – – Of free-cutting steel	Free	—
	– – – – Other, containing by weight
7207 20 15	– – – – – 0,25 % or more but less than 0,6 % of carbon	Free	—
7207 20 17	– – – – – 0,6 % or more of carbon	Free	—
7207 20 19	– – – Forged	Free	—
	– – Other, of rectangular (other than square) cross-section
7207 20 32	– – – Rolled or obtained by continuous casting	Free	—
7207 20 39	– – – Forged	Free	—
	– – Of circular or polygonal cross-section
7207 20 52	– – – Rolled or obtained by continuous casting	Free	—
7207 20 59	– – – Forged	Free	—
7207 20 80	– – Other	Free	—
7208	Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated
7208 10 00	– In coils, not further worked than hot-rolled, with patterns in relief	Free	—
	– Other, in coils, not further worked than hot-rolled, pickled
7208 25 00	– – Of a thickness of 4,75 mm or more	Free	—
7208 26 00	– – Of a thickness of 3 mm or more but less than 4,75 mm	Free	—
7208 27 00	– – Of a thickness of less than 3 mm	Free	—
	– Other, in coils, not further worked than hot-rolled
7208 36 00	– – Of a thickness exceeding 10 mm	Free	—
7208 37 00	– – Of a thickness of 4,75 mm or more but not exceeding 10 mm	Free	—
7208 38 00	– – Of a thickness of 3 mm or more but less than 4,75 mm	Free	—
7208 39 00	– – Of a thickness of less than 3 mm	Free	—
7208 40 00	– Not in coils, not further worked than hot-rolled, with patterns in relief	Free	—
	– Other, not in coils, not further worked than hot-rolled
7208 51	– – Of a thickness exceeding 10 mm
7208 51 20	– – – Of a thickness exceeding 15 mm	Free	—
	– – – Of a thickness exceeding 10 mm but not exceeding 15 mm, of a width of
7208 51 91	– – – – 2 050 mm or more	Free	—
7208 51 98	– – – – Less than 2 050 mm	Free	—
7208 52	– – Of a thickness of 4,75 mm or more but not exceeding 10 mm
7208 52 10	– – – Rolled on four faces or in a closed box pass, of a width not exceeding 1 250 mm	Free	—
	– – – Other, of a width of
7208 52 91	– – – – 2 050 mm or more	Free	—
7208 52 99	– – – – Less than 2 050 mm	Free	—
7208 53	– – Of a thickness of 3 mm or more but less than 4,75 mm
7208 53 10	– – – Rolled on four faces or in a closed box pass, of a width not exceeding 1 250 mm and of a thickness of 4 mm or more	Free	—
7208 53 90	– – – Other	Free	—
7208 54 00	– – Of a thickness of less than 3 mm	Free	—
7208 90	– Other
7208 90 20	– – Perforated	Free	—
7208 90 80	– – Other	Free	—
7209	Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated
	– In coils, not further worked than cold-rolled (cold-reduced)
7209 15 00	– – Of a thickness of 3 mm or more	Free	—
7209 16	– – Of a thickness exceeding 1 mm but less than 3 mm
7209 16 10	– – – ‘Electrical’	Free	—
7209 16 90	– – – Other	Free	—
7209 17	– – Of a thickness of 0,5 mm or more but not exceeding 1 mm
7209 17 10	– – – ‘Electrical’	Free	—
7209 17 90	– – – Other	Free	—
7209 18	– – Of a thickness of less than 0,5 mm
7209 18 10	– – – ‘Electrical’	Free	—
	– – – Other
7209 18 91	– – – – Of a thickness of 0,35 mm or more but less than 0,5 mm	Free	—
7209 18 99	– – – – Of a thickness of less than 0,35 mm	Free	—
	– Not in coils, not further worked than cold-rolled (cold-reduced)
7209 25 00	– – Of a thickness of 3 mm or more	Free	—
7209 26	– – Of a thickness exceeding 1 mm but less than 3 mm
7209 26 10	– – – ‘Electrical’	Free	—
7209 26 90	– – – Other	Free	—
7209 27	– – Of a thickness of 0,5 mm or more but not exceeding 1 mm
7209 27 10	– – – ‘Electrical’	Free	—
7209 27 90	– – – Other	Free	—
7209 28	– – Of a thickness of less than 0,5 mm
7209 28 10	– – – ‘Electrical’	Free	—
7209 28 90	– – – Other	Free	—
7209 90	– Other
7209 90 20	– – Perforated	Free	—
7209 90 80	– – Other	Free	—
7210	Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated
	– Plated or coated with tin
7210 11 00	– – Of a thickness of 0,5 mm or more	Free	—
7210 12	– – Of a thickness of less than 0,5 mm
7210 12 20	– – – Tinplate	Free	—
7210 12 80	– – – Other	Free	—
7210 20 00	– Plated or coated with lead, including terne-plate	Free	—
7210 30 00	– Electrolytically plated or coated with zinc	Free	—
	– Otherwise plated or coated with zinc
7210 41 00	– – Corrugated	Free	—
7210 49 00	– – Other	Free	—
7210 50 00	– Plated or coated with chromium oxides or with chromium and chromium oxides	Free	—
	– Plated or coated with aluminium
7210 61 00	– – Plated or coated with aluminium-zinc alloys	Free	—
7210 69 00	– – Other	Free	—
7210 70	– Painted, varnished or coated with plastics
7210 70 10	– – Tinplate, varnished; products, plated or coated with chromium oxides or with chromium and chromium oxides, varnished	Free	—
7210 70 80	– – Other	Free	—
7210 90	– Other
7210 90 30	– – Clad	Free	—
7210 90 40	– – Tinned and printed	Free	—
7210 90 80	– – Other	Free	—
7211	Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated
	– Not further worked than hot-rolled
7211 13 00	– – Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief	Free	—
7211 14 00	– – Other, of a thickness of 4,75 mm or more	Free	—
7211 19 00	– – Other	Free	—
	– Not further worked than cold-rolled (cold-reduced)
7211 23	– – Containing by weight less than 0,25 % of carbon
7211 23 20	– – – ‘Electrical’	Free	—
	– – – Other
7211 23 30	– – – – Of a thickness of 0,35 mm or more	Free	—
7211 23 80	– – – – Of a thickness of less than 0,35 mm	Free	—
7211 29 00	– – Other	Free	—
7211 90	– Other
7211 90 20	– – Perforated	Free	—
7211 90 80	– – Other	Free	—
7212	Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, clad, plated or coated
7212 10	– Plated or coated with tin
7212 10 10	– – Tinplate, not further worked than surface-treated	Free	—
7212 10 90	– – Other	Free	—
7212 20 00	– Electrolytically plated or coated with zinc	Free	—
7212 30 00	– Otherwise plated or coated with zinc	Free	—
7212 40	– Painted, varnished or coated with plastics
7212 40 20	– – Tinplate, not further worked than varnished; products, plated or coated with chromium oxides or with chromium and chromium oxides, varnished	Free	—
7212 40 80	– – Other	Free	—
7212 50	– Otherwise plated or coated
7212 50 20	– – Plated or coated with chromium oxides or with chromium and chromium oxides	Free	—
7212 50 30	– – Plated or coated with chromium or nickel	Free	—
7212 50 40	– – Plated or coated with copper	Free	—
	– – Plated or coated with aluminium
7212 50 61	– – – Plated or coated with aluminium-zinc alloys	Free	—
7212 50 69	– – – Other	Free	—
7212 50 90	– – Other	Free	—
7212 60 00	– Clad	Free	—
7213	Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel
7213 10 00	– Containing indentations, ribs, grooves or other deformations produced during the rolling process	Free	—
7213 20 00	– Other, of free-cutting steel	Free	—
	– Other
7213 91	– – Of circular cross-section measuring less than 14 mm in diameter
7213 91 10	– – – Of a type used for concrete reinforcement	Free	—
7213 91 20	– – – Of a type used for tyre cord	Free	—
	– – – Other
7213 91 41	– – – – Containing by weight 0,06 % or less of carbon	Free	—
7213 91 49	– – – – Containing by weight more than 0,06 % but less than 0,25 % of carbon	Free	—
7213 91 70	– – – – Containing by weight 0,25 % or more but not more than 0,75 % of carbon	Free	—
7213 91 90	– – – – Containing by weight more than 0,75 % of carbon	Free	—
7213 99	– – Other
7213 99 10	– – – Containing by weight less than 0,25 % of carbon	Free	—
7213 99 90	– – – Containing by weight 0,25 % or more of carbon	Free	—
7214	Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling
7214 10 00	– Forged	Free	—
7214 20 00	– Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling	Free	—
7214 30 00	– Other, of free-cutting steel	Free	—
	– Other
7214 91	– – Of rectangular (other than square) cross-section
7214 91 10	– – – Containing by weight less than 0,25 % of carbon	Free	—
7214 91 90	– – – Containing by weight 0,25 % or more of carbon	Free	—
7214 99	– – Other
	– – – Containing by weight less than 0,25 % of carbon
7214 99 10	– – – – Of a type used for concrete reinforcement	Free	—
	– – – – Other, of circular cross-section measuring in diameter
7214 99 31	– – – – – 80 mm or more	Free	—
7214 99 39	– – – – – Less than 80 mm	Free	—
7214 99 50	– – – – Other	Free	—
	– – – Containing by weight 0,25 % or more of carbon
	– – – – Of a circular cross-section measuring in diameter
7214 99 71	– – – – – 80 mm or more	Free	—
7214 99 79	– – – – – Less than 80 mm	Free	—
7214 99 95	– – – – Other	Free	—
7215	Other bars and rods of iron or non-alloy steel
7215 10 00	– Of free-cutting steel, not further worked than cold-formed or cold-finished	Free	—
7215 50	– Other, not further worked than cold-formed or cold-finished
	– – Containing by weight less than 0,25 % of carbon
7215 50 11	– – – Of rectangular (other than square) cross-section	Free	—
7215 50 19	– – – Other	Free	—
7215 50 80	– – Containing by weight 0,25 % or more of carbon	Free	—
7215 90 00	– Other	Free	—
7216	Angles, shapes and sections of iron or non-alloy steel
7216 10 00	– U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm	Free	—
	– L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm
7216 21 00	– – L sections	Free	—
7216 22 00	– – T sections	Free	—
	– U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more
7216 31	– – U sections
7216 31 10	– – – Of a height of 80 mm or more but not exceeding 220 mm	Free	—
7216 31 90	– – – Of a height exceeding 220 mm	Free	—
7216 32	– – I sections
	– – – Of a height of 80 mm or more but not exceeding 220 mm
7216 32 11	– – – – With parallel flange faces	Free	—
7216 32 19	– – – – Other	Free	—
	– – – Of a height exceeding 220 mm
7216 32 91	– – – – With parallel flange faces	Free	—
7216 32 99	– – – – Other	Free	—
7216 33	– – H sections
7216 33 10	– – – Of a height of 80 mm or more but not exceeding 180 mm	Free	—
7216 33 90	– – – Of a height exceeding 180 mm	Free	—
7216 40	– L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more
7216 40 10	– – L sections	Free	—
7216 40 90	– – T sections	Free	—
7216 50	– Other angles, shapes and sections, not further worked than hot-rolled, hot-drawn or extruded
7216 50 10	– – With a cross-section which is capable of being enclosed in a square the side of which is 80 mm	Free	—
	– – Other
7216 50 91	– – – Bulb flats	Free	—
7216 50 99	– – – Other	Free	—
	– Angles, shapes and sections, not further worked than cold-formed or cold-finished
7216 61	– – Obtained from flat-rolled products
7216 61 10	– – – C, L, U, Z, omega or open-ended sections	Free	—
7216 61 90	– – – Other	Free	—
7216 69 00	– – Other	Free	—
	– Other
7216 91	– – Cold-formed or cold-finished from flat-rolled products
7216 91 10	– – – Profiled (ribbed) sheets	Free	—
7216 91 80	– – – Other	Free	—
7216 99 00	– – Other	Free	—
7217	Wire of iron or non-alloy steel
7217 10	– Not plated or coated, whether or not polished
	– – Containing by weight less than 0,25 % of carbon
7217 10 10	– – – With a maximum cross-sectional dimension of less than 0,8 mm	Free	—
	– – – With a maximum cross-sectional dimension of 0,8 mm or more
7217 10 31	– – – – Containing indentations, ribs, grooves or other deformations produced during the rolling process	Free	—
7217 10 39	– – – – Other	Free	—
7217 10 50	– – Containing by weight 0,25 % or more but less than 0,6 % of carbon	Free	—
7217 10 90	– – Containing by weight 0,6 % or more of carbon	Free	—
7217 20	– Plated or coated with zinc
	– – Containing by weight less than 0,25 % of carbon
7217 20 10	– – – With a maximum cross-sectional dimension of less than 0,8 mm	Free	—
7217 20 30	– – – With a maximum cross-sectional dimension of 0,8 mm or more	Free	—
7217 20 50	– – Containing by weight 0,25 % or more but less than 0,6 % of carbon	Free	—
7217 20 90	– – Containing by weight 0,6 % or more of carbon	Free	—
7217 30	– Plated or coated with other base metals
	– – Containing by weight less than 0,25 % of carbon
7217 30 41	– – – Copper-coated	Free	—
7217 30 49	– – – Other	Free	—
7217 30 50	– – Containing by weight 0,25 % or more but less than 0,6 % of carbon	Free	—
7217 30 90	– – Containing by weight 0,6 % or more of carbon	Free	—
7217 90	– Other
7217 90 20	– – Containing by weight less than 0,25 % of carbon	Free	—
7217 90 50	– – Containing by weight 0,25 % or more but less than 0,6 % of carbon	Free	—
7217 90 90	– – Containing by weight 0,6 % or more of carbon	Free	—
III. STAINLESS STEEL	III. STAINLESS STEEL
7218	Stainless steel in ingots or other primary forms; semi-finished products of stainless steel
7218 10 00	– Ingots and other primary forms	Free	—
	– Other
7218 91	– – Of rectangular (other than square) cross-section
7218 91 10	– – – Containing by weight 2,5 % or more of nickel	Free	—
7218 91 80	– – – Containing by weight less than 2,5 % of nickel	Free	—
7218 99	– – Other
	– – – Of square cross-section
7218 99 11	– – – – Rolled or obtained by continous casting	Free	—
7218 99 19	– – – – Forged	Free	—
	– – – Other
7218 99 20	– – – – Rolled or obtained by continuous casting	Free	—
7218 99 80	– – – – Forged	Free	—
7219	Flat-rolled products of stainless steel, of a width of 600 mm or more
	– Not further worked than hot-rolled, in coils
7219 11 00	– – Of a thickness exceeding 10 mm	Free	—
7219 12	– – Of a thickness of 4,75 mm or more but not exceeding 10 mm
7219 12 10	– – – Containing by weight 2,5 % or more of nickel	Free	—
7219 12 90	– – – Containing by weight less than 2,5 % of nickel	Free	—
7219 13	– – Of a thickness of 3 mm or more but less than 4,75 mm
7219 13 10	– – – Containing by weight 2,5 % or more of nickel	Free	—
7219 13 90	– – – Containing by weight less than 2,5 % of nickel	Free	—
7219 14	– – Of a thickness of less than 3 mm
7219 14 10	– – – Containing by weight 2,5 % or more of nickel	Free	—
7219 14 90	– – – Containing by weight less than 2,5 % of nickel	Free	—
	– Not further worked than hot-rolled, not in coils
7219 21	– – Of a thickness exceeding 10 mm
7219 21 10	– – – Containing by weight 2,5 % or more of nickel	Free	—
7219 21 90	– – – Containing by weight less than 2,5 % of nickel	Free	—
7219 22	– – Of a thickness of 4,75 mm or more but not exceeding 10 mm
7219 22 10	– – – Containing by weight 2,5 % or more of nickel	Free	—
7219 22 90	– – – Containing by weight less than 2,5 % of nickel	Free	—
7219 23 00	– – Of a thickness of 3 mm or more but less than 4,75 mm	Free	—
7219 24 00	– – Of a thickness of less than 3 mm	Free	—
	– Not further worked than cold-rolled (cold-reduced)
7219 31 00	– – Of a thickness of 4,75 mm or more	Free	—
7219 32	– – Of a thickness of 3 mm or more but less than 4,75 mm
7219 32 10	– – – Containing by weight 2,5 % or more of nickel	Free	—
7219 32 90	– – – Containing by weight less than 2,5 % of nickel	Free	—
7219 33	– – Of a thickness exceeding 1 mm but less than 3 mm
7219 33 10	– – – Containing by weight 2,5 % or more of nickel	Free	—
7219 33 90	– – – Containing by weight less than 2,5 % of nickel	Free	—
7219 34	– – Of a thickness of 0,5 mm or more but not exceeding 1 mm
7219 34 10	– – – Containing by weight 2,5 % or more of nickel	Free	—
7219 34 90	– – – Containing by weight less than 2,5 % of nickel	Free	—
7219 35	– – Of a thickness of less than 0,5 mm
7219 35 10	– – – Containing by weight 2,5 % or more of nickel	Free	—
7219 35 90	– – – Containing by weight less than 2,5 % of nickel	Free	—
7219 90	– Other
7219 90 20	– – Perforated	Free	—
7219 90 80	– – Other	Free	—
7220	Flat-rolled products of stainless steel, of a width of less than 600 mm
	– Not further worked than hot-rolled
7220 11 00	– – Of a thickness of 4,75 mm or more	Free	—
7220 12 00	– – Of a thickness of less than 4,75 mm	Free	—
7220 20	– Not further worked than cold-rolled (cold-reduced)
	– – Of a thickness of 3 mm or more, containing by weight
7220 20 21	– – – 2,5 % or more of nickel	Free	—
7220 20 29	– – – Less than 2,5 % of nickel	Free	—
	– – Of a thickness exceeding 0,35 mm but of less than 3 mm, containing by weight
7220 20 41	– – – 2,5 % or more of nickel	Free	—
7220 20 49	– – – Less than 2,5 % of nickel	Free	—
	– – Of a thickness not exceeding 0,35 mm, containing by weight
7220 20 81	– – – 2,5 % or more of nickel	Free	—
7220 20 89	– – – Less than 2,5 % of nickel	Free	—
7220 90	– Other
7220 90 20	– – Perforated	Free	—
7220 90 80	– – Other	Free	—
7221 00	Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel
7221 00 10	– Containing by weight 2,5 % or more of nickel	Free	—
7221 00 90	– Containing by weight less than 2,5 % of nickel	Free	—
7222	Other bars and rods of stainless steel; angles, shapes and sections of stainless steel
	– Bars and rods, not further worked than hot-rolled, hot-drawn or extruded
7222 11	– – Of circular cross-section
	– – – Of a diameter of 80 mm or more, containing by weight
7222 11 11	– – – – 2,5 % or more of nickel	Free	—
7222 11 19	– – – – Less than 2,5 % of nickel	Free	—
	– – – Of a diameter of less than 80 mm, containing by weight
7222 11 81	– – – – 2,5 % or more of nickel	Free	—
7222 11 89	– – – – Less than 2,5 % of nickel	Free	—
7222 19	– – Other
7222 19 10	– – – Containing by weight 2,5 % or more of nickel	Free	—
7222 19 90	– – – Containing by weight less than 2,5 % of nickel	Free	—
7222 20	– Bars and rods, not further worked than cold-formed or cold-finished
	– – Of circular cross-section
	– – – Of a diameter of 80 mm or more, containing by weight
7222 20 11	– – – – 2,5 % or more of nickel	Free	—
7222 20 19	– – – – Less than 2,5 % of nickel	Free	—
	– – – Of a diameter of 25 mm or more, but less than 80 mm, containing by weight
7222 20 21	– – – – 2,5 % or more of nickel	Free	—
7222 20 29	– – – – Less than 2,5 % of nickel	Free	—
	– – – Of a diameter of less than 25 mm, containing by weight
7222 20 31	– – – – 2,5 % or more of nickel	Free	—
7222 20 39	– – – – Less than 2,5 % of nickel	Free	—
	– – Other, containing by weight
7222 20 81	– – – 2,5 % or more of nickel	Free	—
7222 20 89	– – – Less than 2,5 % of nickel	Free	—
7222 30	– Other bars and rods
	– – Forged, containing by weight
7222 30 51	– – – 2,5 % or more of nickel	Free	—
7222 30 91	– – – Less than 2,5 % of nickel	Free	—
7222 30 97	– – Other	Free	—
7222 40	– Angles, shapes and sections
7222 40 10	– – Not further worked than hot-rolled, hot-drawn or extruded	Free	—
7222 40 50	– – Not further worked than cold-formed or cold-finished	Free	—
7222 40 90	– – Other	Free	—
7223 00	Wire of stainless steel
	– Containing by weight 2,5 % or more of nickel
7223 00 11	– – Containing by weight 28 % or more but not more than 31 % of nickel and 20 % or more but not more than 22 % of chromium	Free	—
7223 00 19	– – Other	Free	—
	– Containing by weight less than 2,5 % of nickel
7223 00 91	– – Containing by weight 13 % or more but not more than 25 % of chromium and 3,5 % or more but not more than 6 % of aluminium	Free	—
7223 00 99	– – Other	Free	—
IV. OTHER ALLOY STEEL; HOLLOW DRILL BARS AND RODS, OF ALLOY OR NON-ALLOY STEEL	IV. OTHER ALLOY STEEL; HOLLOW DRILL BARS AND RODS, OF ALLOY OR NON-ALLOY STEEL
7224	Other alloy steel in ingots or other primary forms; semi-finished products of other alloy steel
7224 10	– Ingots and other primary forms
7224 10 10	– – Of tool steel	Free	—
7224 10 90	– – Other	Free	—
7224 90	– Other
7224 90 02	– – Of tool steel	Free	—
	– – Other
	– – – Of rectangular (including square) cross-section
	– – – – Hot-rolled or obtained by continuous casting
	– – – – – The width measuring less than twice the thickness
7224 90 03	– – – – – – Of high-speed steel	Free	—
7224 90 05	– – – – – – Containing by weight not more than 0,7 % of carbon, 0,5 % or more but not more than 1,2 % of manganese and 0,6 % or more but not more than 2,3 % of silicon; containing by weight 0,0008 % or more of boron with any other element less than the minimum content referred to in note 1(f) to this chapter	Free	—
7224 90 07	– – – – – – Other	Free	—
7224 90 14	– – – – – Other	Free	—
7224 90 18	– – – – Forged	Free	—
	– – – Other
	– – – – Hot-rolled or obtained by continuous casting
7224 90 31	– – – – – Containing by weight not less than 0,9 % but not more than 1,15 % of carbon, not less than 0,5 % but not more than 2 % of chromium and, if present, not more than 0,5 % of molybdenum	Free	—
7224 90 38	– – – – – Other	Free	—
7224 90 90	– – – – Forged	Free	—
7225	Flat-rolled products of other alloy steel, of a width of 600 mm or more
	– Of silicon-electrical steel
7225 11 00	– – Grain-oriented	Free	—
7225 19	– – Other
7225 19 10	– – – Hot-rolled	Free	—
7225 19 90	– – – Cold-rolled	Free	—
7225 30	– Other, not further worked than hot-rolled, in coils
7225 30 10	– – Of tool steel	Free	—
7225 30 30	– – Of high-speed steel	Free	—
7225 30 90	– – Other	Free	—
7225 40	– Other, not further worked than hot-rolled, not in coils
7225 40 12	– – Of tool steel	Free	—
7225 40 15	– – Of high-speed steel	Free	—
	– – Other
7225 40 40	– – – Of a thickness exceeding 10 mm	Free	—
7225 40 60	– – – Of a thickness of 4,75 mm or more but not exceeding 10 mm	Free	—
7225 40 90	– – – Of a thickness of less than 4,75 mm	Free	—
7225 50	– Other, not further worked than cold-rolled (cold-reduced)
7225 50 20	– – Of high-speed steel	Free	—
7225 50 80	– – Other	Free	—
	– Other
7225 91 00	– – Electrolytically plated or coated with zinc	Free	—
7225 92 00	– – Otherwise plated or coated with zinc	Free	—
7225 99 00	– – Other	Free	—
7226	Flat-rolled products of other alloy steel, of a width of less than 600 mm
	– Of silicon-electrical steel
7226 11 00	– – Grain-oriented	Free	—
7226 19	– – Other
7226 19 10	– – – Not further worked than hot-rolled	Free	—
7226 19 80	– – – Other	Free	—
7226 20 00	– Of high-speed steel	Free	—
	– Other
7226 91	– – Not further worked than hot-rolled
7226 91 20	– – – Of tool steel	Free	—
	– – – Other
7226 91 91	– – – – Of a thickness of 4,75 mm or more	Free	—
7226 91 99	– – – – Of a thickness of less than 4,75 mm	Free	—
7226 92 00	– – Not further worked than cold-rolled (cold-reduced)	Free	—
7226 99	– – Other
7226 99 10	– – – Electrolytically plated or coated with zinc	Free	—
7226 99 30	– – – Otherwise plated or coated with zinc	Free	—
7226 99 70	– – – Other	Free	—
7227	Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel
7227 10 00	– Of high-speed steel	Free	—
7227 20 00	– Of silico-manganese steel	Free	—
7227 90	– Other
7227 90 10	– – Containing by weight 0,0008 % or more of boron with any other element less than the minimum content referred to in note 1(f) to this chapter	Free	—
7227 90 50	– – Containing by weight 0,9 % or more but not more than 1,15 % of carbon, 0,5 % or more but not more than 2 % of chromium and, if present, not more than 0,5 % of molybdenum	Free	—
7227 90 95	– – Other	Free	—
7228	Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel
7228 10	– Bars and rods, of high-speed steel
7228 10 20	– – Not further worked than hot-rolled, hot-drawn or extruded; hot-rolled, hot-drawn or extruded, not further worked than clad	Free	—
7228 10 50	– – Forged	Free	—
7228 10 90	– – Other	Free	—
7228 20	– Bars and rods, of silico-manganese steel
7228 20 10	– – Of rectangular (other than square) cross-section, hot-rolled on four faces	Free	—
	– – Other
7228 20 91	– – – Not further worked than hot-rolled, hot-drawn or extruded; hot-rolled, hot-drawn or extruded, not further worked than clad	Free	—
7228 20 99	– – – Other	Free	—
7228 30	– Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded
7228 30 20	– – Of tool steel	Free	—
	– – Containing by weight 0,9 % or more but not more than 1,15 % of carbon, 0,5 % or more but not more than 2 % of chromium and, if present, not more than 0,5 % of molybdenum
7228 30 41	– – – Of circular cross-section of a diameter of 80 mm or more	Free	—
7228 30 49	– – – Other	Free	—
	– – Other
	– – – Of circular cross-section, of a diameter of
7228 30 61	– – – – 80 mm or more	Free	—
7228 30 69	– – – – Less than 80 mm	Free	—
7228 30 70	– – – Of rectangular (other than square) cross-section, hot-rolled on four faces	Free	—
7228 30 89	– – – Other	Free	—
7228 40	– Other bars and rods, not further worked than forged
7228 40 10	– – Of tool steel	Free	—
7228 40 90	– – Other	Free	—
7228 50	– Other bars and rods, not further worked than cold-formed or cold-finished
7228 50 20	– – Of tool steel	Free	—
7228 50 40	– – Containing by weight 0,9 % or more but not more than 1,15 % of carbon, 0,5 % or more but not more than 2 % of chromium and, if present, not more than 0,5 % of molybdenum	Free	—
	– – Other
	– – – Of circular cross-section, of a diameter of
7228 50 61	– – – – 80 mm or more	Free	—
7228 50 69	– – – – Less than 80 mm	Free	—
7228 50 80	– – – Other	Free	—
7228 60	– Other bars and rods
7228 60 20	– – Of tool steel	Free	—
7228 60 80	– – Other	Free	—
7228 70	– Angles, shapes and sections
7228 70 10	– – Not further worked than hot-rolled, hot-drawn or extruded	Free	—
7228 70 90	– – Other	Free	—
7228 80 00	– Hollow drill bars and rods	Free	—
7229	Wire of other alloy steel
7229 20 00	– Of silico-manganese steel	Free	—
7229 90	– Other
7229 90 20	– – Of high-speed steel	Free	—
7229 90 50	– – Containing by weight 0,9 % or more but not more than 1,15 % of carbon, 0,5 % or more but not more than 2 % of chromium and, if present, not more than 0,5 % of molybdenum	Free	—
7229 90 90	– – Other	Free	—

CHAPTER 73 ARTICLES OF IRON OR STEEL

Notes

1. In this chapter, the expression ‘cast iron’ applies to products obtained by casting in which iron predominates by weight over each of the other elements and which do not comply with the chemical composition of steel as defined in note 1(d) to Chapter 72.

1. In this chapter, the word ‘wire’ means hot- or cold-formed products of any cross-sectional shape, of which no cross-sectional dimension exceeds 16 mm.

Reading this document does not replace reading the official text published in the Official Journal of the European Union. We assume no responsibility for any inaccuracies arising from the conversion of the original to this format.

This text is published under EUR-Lex's own terms of reuse, not a Legalize or public-domain licence. EUR-Lex
Creative Commons Attribution 4.0 International (CC BY 4.0)
© European Union, https://eur-lex.europa.eu — Source: EUR-Lex (Publications Office of the European Union). Reused under the Creative Commons Attribution 4.0 International (CC BY 4.0) licence. Only EU legislation published in the printed Official Journal of the European Union is deemed authentic; consolidated texts are reproduced here for documentation purposes and have been reformatted to Markdown.