LegalizeCommission Implementing Regulation (EU) 2019/423 of 13 March 2019 granting a Union authorisation for the biocidal product family ‘Teat disinfectants biocidal product family of Novadan’
This is the act as published. Later amendments are not folded into the text below: each one is a separate act in this repository and an entry in this law's history.
| Product type | PT03 — Veterinary hygiene (Disinfectants) |
| Where relevant, an exact description of the authorised use | — |
| Target organism(s) (including development stage) | Bacteria Yeast |
| Field(s) of use | Indoor DISINFECTION FOR VETERINARY HYGIENE: Teat disinfection product for milkable animals (cows, buffaloes, sheep, goats) for use after milking. |
| Application method(s) | Manual spraying, electronic sprayer (RTU) Open a can containing the RTU product and insert the suction tube of the electronic sprayer. Clean the teats carefully by wiping with a single service paper towel/cloth immediately before milking. After milking, spray the disinfectant on the teats using the electronic sprayer making sure that each teat is covered with the disinfectant. Replace the empty can by a new can as needed. After disinfection, put the suction tube system into a bucket of water and rinse the sprayer by pumping the water through the sprayer. |
| Application rate(s) and frequency | Cows and buffaloes: 4 ml/animal per treatment; sheep: 2 ml/animal per treatment; goats: 3 ml/animal per treatment Post-milking application 1-3 times per day (apply after every milking). |
| Category(ies) of users | Professional |
| Pack sizes and packaging material | Jerry can, HDPE: 0,5 L, 5 L, 10 L, 20 L, 60 L Plastic drum, HDPE: 200 L IBC, HDPE: 1 000 L Opaque containers. |
4.3.1. Use-specific instructions for use
See general directions for use.
4.3.2. Use-specific risk mitigation measures
Wear protective chemical resistant gloves when applying the product by manual spraying (glove material to be specified by the authorisation holder within the product information).
4.3.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use.
4.3.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use.
4.3.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use.
4.4. Use description
Table 18. Use # 4 – Post-milking automated dipping (RTU)
| Product type | PT03 — Veterinary hygiene (Disinfectants) |
| Where relevant, an exact description of the authorised use | — |
| Target organism(s) (including development stage) | Bacteria Yeast |
| Field(s) of use | Indoor DISINFECTION FOR VETERINARY HYGIENE: Teat disinfection product for milkable animals (cows, buffaloes, sheep, goats) for use after milking. |
| Application method(s) | Automated dipping (RTU) Open a can containing the RTU product and insert the suction tube of the automated dipping-system. Before milking clean teats carefully by automatic procedure or manually. After milking, the vacuum is shut off and the teat dip is injected into a manifold on the claw piece. The teats are coated with 2-4 ml of dip when the teat cup is withdrawn by the Automatic Cluster Removal (ACR). After the removal of the ACR, every liner of the automated dipping-system is thoroughly rinsed with water and blown out with compressed air. In a final cleaning step after each milking session of the herd, the liners are disinfected (e.g. with a chlorine-based product) and blown out again with compressed air. Afterwards, the milking system is ready for the next milking event. The whole process is automated. |
| Application rate(s) and frequency | Cows and buffaloes: 4 ml/animal per treatment; sheep: 2 ml/animal per treatment; goats: 3 ml/animal per treatment. Post-milking application 1-3 times per day (apply after every milking). |
| Category(ies) of users | Professional |
| Pack sizes and packaging material | Jerry can, HDPE: 0.5 L, 5 L, 10 L, 20 L, 60 L Plastic drum, HDPE: 200 L IBC, HDPE: 1 000 L Opaque containers. |
4.4.1. Use-specific instructions for use
See general directions for use.
4.4.2. Use-specific risk mitigation measures
See general directions for use.
4.4.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use.
4.4.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use.
4.4.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use.
4.5. Use description
Table 19. Use # 5 – Post-milking automated spraying by robot (RTU)
| Product type | PT03 — Veterinary hygiene (Disinfectants) |
| Where relevant, an exact description of the authorised use | — |
| Target organism(s) (including development stage) | Bacteria Yeast |
| Field(s) of use | Indoor DISINFECTION FOR VETERINARY HYGIENE: Teat disinfection product for milkable animals (cows, buffaloes, sheep, goats) for use after milking. |
| Application method(s) | Automated spraying by robot (RTU) Open a can containing the RTU product and insert the suction tube of the robotic milking device. The teats are cleaned by robot with automatic brushes. After robotic milking, 2-4 ml of the disinfectant is sprayed automatically onto teats from a cluster arm. Rinsing of the sprayer is automatic. |
| Application rate(s) and frequency | Cows and buffaloes: 4 ml/animal per treatment; sheep: 2 ml/animal per treatment; goats: 3 ml/animal per treatment. Post-milking application 1-3 times per day (apply after every milking). |
| Category(ies) of users | Professional |
| Pack sizes and packaging material | Jerry can, HDPE: 0.5 L, 5 L, 10 L, 20 L, 60 L Plastic drum, HDPE: 200 L IBC, HDPE: 1 000 L Opaque containers. |
4.5.1. Use-specific instructions for use
See general directions for use.
4.5.2. Use-specific risk mitigation measures
See general directions for use.
4.5.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use.
4.5.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use.
4.5.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use.
5. GENERAL DIRECTIONS FOR USE 8 OF THE META SPC 5
5.1. Instructions for use
Fill the reservoir with the RTU product and screw the dip cup on top.
The products must be brought to temperatures above 20 °C before use.
The use of a dosing pump for filling the product into the application equipment is recommended.
To ensure sufficient contact time, care should be taken that the product is not removed after application. Leave the product on the teats and keep the animals standing for at least five minutes after treatment for post-milking disinfection.
5.2. Risk mitigation measures
In case a combination of pre- and post-milking disinfection is necessary, using another product not containing iodine has to be considered for pre-milking disinfection.
5.3. Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
Description of first aid measures
General: Remove affected person from source of contamination.
After inhalation: Remove person to fresh air and keep comfortable for breathing. Get medical attention if any discomfort continues.
After skin contact: Rinse with water. Remove contaminated clothing and shoes. Seek medical advice if any skin reaction/or discomfort occurs.
After eye contact: Immediately rinse with water (at least 15 minutes). Remove contact lenses, if present and easy to do. Continue rinsing. Get medical attention if any discomfort continues.
After ingestion: Contact poison treatment specialist immediately if symptoms occur and/or in case of mouth contact with large quantities. Do not give fluids or induce vomiting in case of impaired consciousness; place in recovery position and seek medical advice immediately.
If medical advice is needed, have product container or label at hand.
Environmental emergency measures
Prevent run-off from entering drains, sewers or waterways
Inform the relevant authorities if the product has caused environmental pollution (sewers, waterways, soil or air)
Dike to collect larger liquid spills
Contain and/or absorb spill with inert material, then place in closed and suitable container for disposal according to regulations
Do not place spilled materials back into the original container
5.4. Instructions for safe disposal of the product and its packaging
Method of disposal: Dispose unused product and the packaging in accordance with local requirements. Used product can be flushed to the municipal sewer or disposed to the manure deposit depending on local requirements. Avoid release to an individual waste water treatment plant.
Empty containers are rinsed with plenty of water and disposed to normal or commercial waste.
The paper towels used for the cleaning of teats are disposed in the normal rubbish.
Product classified as hazardous waste: No
Packaging classified as hazardous waste: No
EWC waste code: EWC: 0706 wastes from the MFSU of fats, grease, soaps, detergents, disinfectants and cosmetics
Other information: When handling waste, consideration should be made to the safety precautions applying to handling of the product. Waste code applies to product remnants in pure form.
5.5. Conditions of storage and shelf-life of the product under normal conditions of storage
Mentioned in the SDS: Keep in original container. Store the product away from direct sunlight in opaque containers. Keep separate from food, feedstuffs, fertilisers and other sensitive material. Store above freezing.
Storage temperature: 0 – 30 °C
Shelf-life: 24 months.
6. OTHER INFORMATION
pH range of meta-SPC 5: 4-5
7. THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 5
7.1. Trade name(s), authorisation number and specific composition of each individual product
| Trade name(s) | Nova Dip Spray 3000 IO Spray Plus PV-Plus 3000 Tehotippi Soft Plus F 6 Robo V | Nova Dip Spray 3000 IO Spray Plus PV-Plus 3000 Tehotippi Soft Plus F 6 Robo V | Nova Dip Spray 3000 IO Spray Plus PV-Plus 3000 Tehotippi Soft Plus F 6 Robo V | Nova Dip Spray 3000 IO Spray Plus PV-Plus 3000 Tehotippi Soft Plus F 6 Robo V | Nova Dip Spray 3000 IO Spray Plus PV-Plus 3000 Tehotippi Soft Plus F 6 Robo V |
| Authorisation number | EU-0019757-0005 1-5 | EU-0019757-0005 1-5 | EU-0019757-0005 1-5 | EU-0019757-0005 1-5 | EU-0019757-0005 1-5 |
| Common name | IUPAC name | Function | CAS number | EC number | Content (%) |
| Polyvinylpyrrolidone iodine | Active Substance | 25655-41-8 | 1,46 | ||
| Iodine | Active Substance | 7553-56-2 | 231-442-4 | 0,307 |
META SPC 6
1. META SPC 6 ADMINISTRATIVE INFORMATION
1.1. Meta SPC 6 identifier
| Identifier | meta-SPC 6 |
1.2. Suffix to the authorisation number
| Number | 1-6 |
1.3. Product type(s)
| Product type(s) | PT03 — Veterinary hygiene (Disinfectants) |
2. META SPC 6 COMPOSITION
2.1. Qualitative and quantitative information on the composition of the meta SPC 6
| Common name | IUPAC name | Function | CAS number | EC number | Content (%) | Content (%) |
|---|---|---|---|---|---|---|
| Common name | IUPAC name | Function | CAS number | EC number | Min | Max |
| Polyvinylpyrrolidone iodine | Active Substance | 25655-41-8 | 1,0 | 1,43 | ||
| Iodine | Active Substance | 7553-56-2 | 231-442-4 | 0,21 | 0,3 |
2.2. Type(s) of formulation of the meta SPC 6
| Formulation(s) | EW — Emulsion, oil in water |
3. HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 6
| Hazard statements | Harmful to aquatic life with long lasting effects. Safety data sheet available on request. |
| Precautionary statements | Keep out of reach of children. Avoid release to the environment. Dispose of contents in accordance with local/regional/national/international regulation. Dispose of container in accordance with local/regional/national/international regulation. |
4. AUTHORISED USE(S) OF THE META SPC 6
4.1. Use description
Table 20. Use # 1 – Post-milking manual dipping (RTU)
| Product type | PT03 — Veterinary hygiene (Disinfectants) |
| Where relevant, an exact description of the authorised use | — |
| Target organism(s) (including development stage) | Bacteria Yeast |
| Field(s) of use | Indoor DISINFECTION FOR VETERINARY HYGIENE: Teat disinfection product for milkable animals (cows, buffaloes, sheep, goats) for use after milking. |
| Application method(s) | Manual dipping (RTU) Fill the reservoir with the RTU product and screw the dip cup on top. Clean the teats carefully by wiping with a single service paper towel/cloth immediately before milking. After milking, squeeze the reservoir and put the dip cup over each teat from below making sure that the full length of the teat is immersed into the disinfectant. Top up with fresh disinfectant by squeezing the reservoir as needed. After disinfection, empty the reservoir and clean reservoir and dip cup by rinsing with water. |
| Application rate(s) and frequency | Cows and buffaloes: 4 ml/animal per treatment; sheep: 2 ml/animal per treatment; goats: 3 ml/animal per treatment. Post-milking application 1-3 times per day (apply after every milking). |
| Category(ies) of users | Professional |
| Pack sizes and packaging material | Jerry can, HDPE: 0,5 L, 5 L, 10 L, 20 L, 60 L Plastic drum, HDPE: 200 L IBC, HDPE: 1 000 L Opaque containers. |
4.1.1. Use-specific instructions for use
See general directions for use.
4.1.2. Use-specific risk mitigation measures
See general directions for use.
4.1.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use.
4.1.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use.
4.1.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use.
4.2. Use description
Table 21. Use # 2 – Post-milking, manual spraying, trigger sprayer (RTU)
| Product type | PT03 — Veterinary hygiene (Disinfectants) |
| Where relevant, an exact description of the authorised use | — |
| Target organism(s) (including development stage) | Bacteria Yeast |
| Field(s) of use | Indoor DISINFECTION FOR VETERINARY HYGIENE: Teat disinfection product for milkable animals (cows, buffaloes, sheep, goats) for use after milking. |
| Application method(s) | Manual spraying, trigger sprayer (RTU) Fill the reservoir with the RTU product and screw the top of the trigger sprayer on it. Clean carefully the teats by wiping with a single service paper towel/cloth before milking. After milking, spray the disinfectant on the teats using the trigger sprayer making sure that each teat is covered with the disinfectant. Top up the reservoir with fresh disinfectant as needed. After disinfection, empty the reservoir and clean reservoir and trigger sprayer by rinsing with water. |
| Application rate(s) and frequency | Cows and buffaloes: 4 ml/animal per treatment; sheep: 2 ml/animal per treatment; goats: 3 ml/animal per treatment. Post-milking application 1-3 times per day (apply after every milking). |
| Category(ies) of users | Professional |
| Pack sizes and packaging material | Jerry can, HDPE: 0,5 L, 5 L, 10 L, 20 L, 60 L Plastic drum, HDPE: 200 L IBC, HDPE: 1 000 L Opaque containers. |
4.2.1. Use-specific instructions for use
See general directions for use.
4.2.2. Use-specific risk mitigation measures
Wear protective chemical resistant gloves when applying the product by manual spraying (glove material to be specified by the authorisation holder within the product information).
4.2.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use.
4.2.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use.
4.2.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use.
4.3. Use description
Table 22. Use # 3 – Post-milking manual spraying using an electronic sprayer (RTU)
| Product type | PT03 — Veterinary hygiene (Disinfectants) |
| Where relevant, an exact description of the authorised use | — |
| Target organism(s) (including development stage) | Bacteria Yeast |
| Field(s) of use | Indoor DISINFECTION FOR VETERINARY HYGIENE: Teat disinfection product for milkable animals (cows, buffaloes, sheep, goats) for use after milking. |
| Application method(s) | Manual spraying, electronic sprayer (RTU) Open a can containing the RTU product and insert the suction tube of the electronic sprayer. Clean carefully the teats by wiping with a single service paper towel/cloth before milking. After milking, spray the disinfectant on the teats using the electronic sprayer making sure that each teat is covered with the disinfectant. Replace the empty can by a new can as needed. After disinfection, put the suction tube system into a bucket of water and rinse the sprayer by pumping the water through the sprayer. |
| Application rate(s) and frequency | Cows and buffaloes: 4 ml/animal per treatment; sheep: 2 ml/animal per treatment; goats: 3 ml/animal per treatment. Post-milking application 1-3 times per day (apply after every milking). |
| Category(ies) of users | Professional |
| Pack sizes and packaging material | Jerry can, HDPE: 0,5 L, 5 L, 10 L, 20 L, 60 L Plastic drum, HDPE: 200 L IBC, HDPE: 1 000 L Opaque containers. |
4.3.1. Use-specific instructions for use
See general directions for use.
4.3.2. Use-specific risk mitigation measures
Wear protective chemical resistant gloves when applying the product by manual spraying (glove material to be specified by the authorisation holder within the product information).
4.3.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use.
4.3.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use.
4.3.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use.
4.4. Use description
Table 23. Use # 4 – Post-milking automated dipping (RTU)
| Product type | PT03 — Veterinary hygiene (Disinfectants) |
| Where relevant, an exact description of the authorised use | — |
| Target organism(s) (including development stage) | Bacteria Yeast |
| Field(s) of use | Indoor DISINFECTION FOR VETERINARY HYGIENE: Teat disinfection product for milkable animals (cows, buffaloes, sheep, goats) for use after milking. |
| Application method(s) | Automated dipping (RTU) Open a can containing the RTU product and insert the suction tube of the automated dipping-system. Before milking clean teats carefully by automatic procedure or manually. After milking, the vacuum is shut off and the teat dip is injected into a manifold on the claw piece. The teats are coated with 2-4 ml of dip when the teat cup is withdrawn by the Automatic Cluster Removal (ACR). After the removal of the ACR, every liner of the automated dipping-system is thoroughly rinsed with water and blown out with compressed air. In a final cleaning step after each milking session of the herd, the liners are disinfected (e.g. with a chlorine-based product) and blown out again with compressed air. Afterwards, the milking system is ready for the next milking event. The whole process is automated. |
| Application rate(s) and frequency | Cows and buffaloes: 4 ml/animal per treatment; sheep: 2 ml/animal per treatment; goats: 3 ml/animal per treatment. Post-milking application 1-3 times per day (apply after every milking). |
| Category(ies) of users | Professional |
| Pack sizes and packaging material | Jerry can, HDPE: 0,5 L, 5 L, 10 L, 20 L, 60 L Plastic drum, HDPE: 200 L IBC, HDPE: 1 000 L Opaque containers. |
4.4.1. Use-specific instructions for use
See general directions for use.
4.4.2. Use-specific risk mitigation measures
See general directions for use.
4.4.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use.
4.4.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use.
4.4.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use.
4.5. Use description
Table 24. Use # 5 – Post-milking automated spraying by robot (RTU)
| Product type | PT03 — Veterinary hygiene (Disinfectants) |
| Where relevant, an exact description of the authorised use | — |
| Target organism(s) (including development stage) | Bacteria Yeast |
| Field(s) of use | Indoor DISINFECTION FOR VETERINARY HYGIENE: Teat disinfection product for milkable animals (cows, buffaloes, sheep, goats) for use after milking. |
| Application method(s) | Automated spraying by robot (RTU) Open a can containing the RTU product and insert the suction tube of the robotic milking device. The teats are cleaned by robot with automatic brushes. After robotic milking, 2-4 ml of the disinfectant is sprayed automatically onto teats from a cluster arm. Rinsing of the sprayer is automatic. |
| Application rate(s) and frequency | Cows and buffaloes: 4 ml/animal per treatment; sheep: 2 ml/animal per treatment; goats: 3 ml/animal per treatment. Post-milking application 1-3 times per day (apply after every milking). |
| Category(ies) of users | Professional |
| Pack sizes and packaging material | Jerry can, HDPE: 0,5 L, 5 L, 10 L, 20 L, 60 L Plastic drum, HDPE: 200 L IBC, HDPE: 1 000 L Opaque containers. |
4.5.1. Use-specific instructions for use
See general directions for use.
4.5.2. Use-specific risk mitigation measures
See general directions for use.
4.5.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use.
4.5.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use.
4.5.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use.
5. GENERAL DIRECTIONS FOR USE 9 OF THE META SPC 6
5.1. Instructions for use
Fill the reservoir with the RTU product and screw the dip cup on top.
The products must be brought to temperatures above 20 °C before use.
The use of a dosing pump for filling the product into the application equipment is recommended.
To ensure sufficient contact time, care should be taken that the product is not removed after application. Leave the product on the teats and keep the animals standing for at least five minutes after treatment for post-milking disinfection.
5.2. Risk mitigation measures
In case a combination of pre- and post-milking disinfection is necessary, using another product not containing iodine has to be considered for pre-milking disinfection.
5.3. Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
Description of first aid measures
General: Remove affected person from source of contamination.
After inhalation: Remove person to fresh air and keep comfortable for breathing. Get medical attention if any discomfort continues.
After skin contact: Rinse with water. Remove contaminated clothing and shoes. Seek medical advice if any skin reaction/or discomfort occurs.
After eye contact: Immediately rinse with water (at least 15 minutes). Remove contact lenses, if present and easy to do. Continue rinsing. Get medical attention if any discomfort continues.
After ingestion: Contact poison treatment specialist immediately if symptoms occur and/or in case of mouth contact with large quantities. Do not give fluids or induce vomiting in case of impaired consciousness; place in recovery position and seek medical advice immediately.
If medical advice is needed, have product container or label at hand.
Environmental emergency measures
Prevent run-off from entering drains, sewers or waterways
Inform the relevant authorities if the product has caused environmental pollution (sewers, waterways, soil or air)
Dike to collect larger liquid spills
Contain and/or absorb spill with inert material, then place in closed and suitable container for disposal according to regulations
Do not place spilled materials back into the original container
5.4. Instructions for safe disposal of the product and its packaging
Method of disposal: Dispose unused product and the packaging in accordance with local requirements. Used product can be flushed to the municipal sewer or disposed to the manure deposit depending on local requirements. Avoid release to an individual waste water treatment plant.
Empty containers are rinsed with plenty of water and disposed to normal or commercial waste.
The paper towels used for the cleaning of teats are disposed in the normal rubbish.
Product classified as hazardous waste: No
Packaging classified as hazardous waste: No
EWC waste code: EWC: 0706 wastes from the MFSU of fats, grease, soaps, detergents, disinfectants and cosmetics
Other information: When handling waste, consideration should be made to the safety precautions applying to handling of the product. Waste code applies to product remnants in pure form.
5.5. Conditions of storage and shelf-life of the product under normal conditions of storage
Mentioned in the SDS: Keep in original container. Store the product away from direct sunlight in opaque containers. Keep separate from food, feedstuffs, fertilisers and other sensitive material. Store above freezing.
Storage temperature: 0 – 30 °C
Shelf-life: 24 months.
6. OTHER INFORMATION
pH range of meta-SPC 6: 4-5
7. THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 6
7.1. Trade name(s), authorisation number and specific composition of each individual product
| Trade name(s) | Jopo Winterspray IO Winterspray Jodopax RTU Barrera W | Jopo Winterspray IO Winterspray Jodopax RTU Barrera W | Jopo Winterspray IO Winterspray Jodopax RTU Barrera W | Jopo Winterspray IO Winterspray Jodopax RTU Barrera W | Jopo Winterspray IO Winterspray Jodopax RTU Barrera W |
| Authorisation number | EU-0019757-0006 1-6 | EU-0019757-0006 1-6 | EU-0019757-0006 1-6 | EU-0019757-0006 1-6 | EU-0019757-0006 1-6 |
| Common name | IUPAC name | Function | CAS number | EC number | Content (%) |
| Polyvinylpyrrolidone iodine | Active Substance | 25655-41-8 | 1,43 | ||
| Iodine | Active Substance | 7553-56-2 | 231-442-4 | 0,3 |
Instructions for use, risk mitigation measures and other directions for use under this section are valid for any authorised uses within the meta SPC 1.
Instructions for use, risk mitigation measures and other directions for use under this section are valid for any authorised uses within the meta SPC 2.
Instructions for use, risk mitigation measures and other directions for use under this section are valid for any authorised uses within the meta SPC 3.
Instructions for use, risk mitigation measures and other directions for use under this section are valid for any authorised uses within the meta SPC 4.
Instructions for use, risk mitigation measures and other directions for use under this section are valid for any authorised uses within the meta SPC 5.
Instructions for use, risk mitigation measures and other directions for use under this section are valid for any authorised uses within the meta SPC 6.
Reading this document does not replace reading the official text published in the Official Journal of the European Union. We assume no responsibility for any inaccuracies arising from the conversion of the original to this format.
This text is published under EUR-Lex's own terms of reuse, not a Legalize or public-domain licence.
EUR-Lex
Creative Commons Attribution 4.0 International (CC BY 4.0)
© European Union, https://eur-lex.europa.eu — Source: EUR-Lex (Publications Office of the European Union). Reused under the Creative Commons Attribution 4.0 International (CC BY 4.0) licence. Only EU legislation published in the printed Official Journal of the European Union is deemed authentic; consolidated texts are reproduced here for documentation purposes and have been reformatted to Markdown.