Commission Implementing Regulation (EU) 2019/900 of 29 May 2019 concerning the authorisation of 8-mercapto-p-menthan-3-one and p-menth-1-ene-8-thiol as feed additives for all animal species (Text with EEA relevance.)

Type Implementing Regulation
Publication 2019-06-03
State In force
Text As published
Department European Commission, SANTE
Source EUR-Lex
articles 3

This is the act as published. Later amendments are not folded into the text below: each one is a separate act in this repository and an entry in this law's history.

Reform history JSON API
3.6.2019 EN Official Journal of the European Union L 144/36

THE EUROPEAN COMMISSION,

Having regard to the Treaty on the Functioning of the European Union,

Having regard to Regulation (EC) No 1831/2003 of the European Parliament and of the Council of 22 September 2003 on additives for use in animal nutrition 1, and in particular Article 9(2) thereof,

Whereas:

HAS ADOPTED THIS REGULATION:

Article 1

Authorisation

The substances specified in the Annex, belonging to the additive category ‘sensory additives’ and to the functional group ‘flavouring compounds’, are authorised as feed additives in animal nutrition subject to the conditions laid down in that Annex.

Article 2

Transitional Measures

1.

The substances specified in the Annex and premixtures containing those substances, which are produced and labelled before 23 December 2019 in accordance with the rules applicable before 23 June 2019 may continue to be placed on the market and used until the existing stocks are exhausted.

2.

Compound feed and feed materials containing the substances as specified in the Annex which are produced and labelled before 23 June 2020 in accordance with the rules applicable before 23 June 2019 may continue to be placed on the market and used until the existing stocks are exhausted if they are intended for food-producing animals.

3.

Compound feed and feed materials containing the substances as specified in the Annex which are produced and labelled before 23 June 2021 in accordance with the rules applicable before 23 June 2019 may continue to be placed on the market and used until the existing stocks are exhausted if they are intended for non-food-producing animals.

Article 3

Entry into Force

This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.

This Regulation shall be binding in its entirety and directly applicable in all Member States.

Done at Brussels, 29 May 2019.

For the Commission

The President

Jean-Claude JUNCKER

2

Council Directive 70/524/EEC of 23 November 1970 concerning additives in feedingstuffs (OJ L 270, 14.12.1970, p. 1).

3

EFSA Journal 2019;17(1):5530.

ANNEX

Identification number of the additive Name of the holder of authorisation Additive Composition, chemical formula, description, analytical method Species or category of animal Maximum age Minimum content Maximum content Other provisions End of period of authorisation
Identification number of the additive Name of the holder of authorisation Additive Composition, chemical formula, description, analytical method Species or category of animal Maximum age mg of active substance/kg of complete feedingstuff with a moisture content of 12 % mg of active substance/kg of complete feedingstuff with a moisture content of 12 % Other provisions End of period of authorisation
Category: Sensory additives. Functional group: Flavouring compounds Category: Sensory additives. Functional group: Flavouring compounds Category: Sensory additives. Functional group: Flavouring compounds Category: Sensory additives. Functional group: Flavouring compounds Category: Sensory additives. Functional group: Flavouring compounds Category: Sensory additives. Functional group: Flavouring compounds Category: Sensory additives. Functional group: Flavouring compounds Category: Sensory additives. Functional group: Flavouring compounds Category: Sensory additives. Functional group: Flavouring compounds Category: Sensory additives. Functional group: Flavouring compounds
2b12038 — 8-mercapto-p-menthan-3-one Additive composition 8-mercapto-p-menthan-3-one Characterisation of the active substance 8-mercapto-p-menthan-3-one Produced by chemical synthesis Purity: min. 97 % Chemical formula: C10H18OS CAS number 38462-22-5 FLAVIS 12.038 Method of analysis 4 For the determination of 8-mercapto-p-menthan-3-one in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species — — — 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixture, the storage conditions, the stability to heat treatment shall be indicated. 3. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures and on the labelling of feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves. 23 June 2029
2b12085 — p-menth-1-ene-8-thiol Additive composition p-menth-1-ene-8-thiol Characterisation of the active substance p-menth-1-ene-8-thiol Produced by chemical synthesis Purity: min. 98 % Chemical formula: C10H18OS CAS number 71159-90-5 FLAVIS 12.085 Method of analysis 4 For the determination of p-menth-1-ene-8-thiol in the feed additive and in feed flavouring premixtures: Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. All animal species — — — 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixture, the storage conditions, the stability to heat treatment shall be indicated. 3. On the label of the additive the following shall be indicated: ‘Recommended maximum content of the active substance of complete feedingstuff with a moisture content of 12 %: 0,05 mg/kg’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixtures and on the labelling of feed materials and compound feedingstuffs, if the following content of the active substance in complete feedingstuff with a moisture content of 12 % is exceeded: 0,05 mg/kg. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection safety glasses and gloves. 23 June 2029
4

Details of the analytical methods are available at the following address of the Reference Laboratory: https://ec.europa.eu/jrc/en/eurl/feed-additives/evaluation-reports

Reading this document does not replace reading the official text published in the Official Journal of the European Union. We assume no responsibility for any inaccuracies arising from the conversion of the original to this format.

This text is published under EUR-Lex's own terms of reuse, not a Legalize or public-domain licence. EUR-Lex
Creative Commons Attribution 4.0 International (CC BY 4.0)
© European Union, https://eur-lex.europa.eu — Source: EUR-Lex (Publications Office of the European Union). Reused under the Creative Commons Attribution 4.0 International (CC BY 4.0) licence. Only EU legislation published in the printed Official Journal of the European Union is deemed authentic; consolidated texts are reproduced here for documentation purposes and have been reformatted to Markdown.