Commission Implementing Regulation (EU) 2019/1213 of 12 July 2019 laying down detailed provisions ensuring uniform conditions for the implementation of interoperability and compatibility of on-board weighing equipment pursuant to Council Directive 96/53/EC (Text with EEA relevance.)

THE EUROPEAN COMMISSION,

Having regard to the Treaty on the Functioning of the European Union,

Having regard to Council Directive 96/53/EC of 25 July 1996 (1), and in particular Article 10d(5) thereof,

Whereas:

(1) On-board weighing equipment is an option provided for the Member States by Directive 96/53/EC for carrying out the control of vehicles or vehicle combinations which may be overloaded.

(2) In line with the second paragraph of Article 10d(5) of Directive 96/53/EC, in order to ensure interoperability, the on-board weighing equipment has to be able to transmit weight data at any time from a moving vehicle to the competent authorities and to the driver through an interface defined by CEN DSRC standards. Technical specifications adapting the content of the standards to the specificities of the information to be provided by on-board weighing equipment should therefore be adopted.

(3) On-board weighing equipment may be fitted in motor vehicles as well as in trailers and semi-trailers. It is necessary to guarantee that on-board weighing equipment fitted in different vehicles of a vehicle combination is mutually compatible. Compatibility should be ensured by the implementation of European standards on C-ITS as referred to in the delegated act supplementing Directive 2010/40/EU of the European Parliament and of the Council (2) with regard to the deployment and operational use of cooperative intelligent transport systems.

(4) Member States mandating the instalment of on-board weighing equipment should be able to exempt from that obligation vehicles or vehicle combinations for which it is impossible to exceed the maximum authorised weight, such as trailers or semitrailers specifically designed for the carriage of liquids or livestock.

(5) The use of on-board weighing equipment for the purpose of enforcement may trigger attempts of manipulation, as is the case with other vehicle systems, such as the digital tachograph or the systems for the restriction of emissions. In order to keep an appropriate level of security against manipulation, the communication between motor vehicle and trailer or semi-trailer must be secured. In addition, on-board weighing equipment should be certified according to the Common Criteria, by a certification body recognised by the Management Committee within the framework of the ‘Mutual Recognition Agreement of Information Technology Security Evaluation Certificates’ of the Senior Officials Group on Information Systems Security (SOG-IS).

(6) Member States which opt for the installation in the vehicle of on-board weighing equipment should ensure that the vehicles undergo inspections of that equipment by OBW-workshops. In order to ensure the uniform implementation of the interoperability rules set out in this Regulation, those workshops should guarantee that the on-board equipment is operating with the appropriate level of accuracy. Those workshops may be, subject to necessary adjustments, testing centres referred to in Directive 2014/45/EU of the European Parliament and of the Council (3), workshops referred to in Regulation (EU) No 165/2014 of the European Parliament and of the Council (4), or any other workshop respecting the requirements of this Regulation. Member States which do not opt for introducing on-board weighing equipment on the grounds of Article 10d(1) of Directive 96/53/EC should not need to set up those workshops.

(7) The current state of the technology does not make possible the implementation of neither CEN DSRC nor C-ITS communication standards in on-board weighing equipment by 27 May 2021. A phased approach should therefore be adopted for the implementation of on-board weighing equipment so that industry is able to develop products compliant with the requirements of this Regulation, and in particular with its Annex II and certain requirements of Annex III. The Member States which opt for the installation in the vehicle of on-board weighing equipment should, by 27 May 2021, apply the requirements referring to stage 1 set out in Annexes I and III. An additional period of three years should be granted for the application of requirements set out in Annex II and those referring to stage 2 set out in Annexes I and III.

(8) Member States may take specific measures to require that the vehicles to be checked by the competent authorities in order to ensure compliance with Directive 96/53/EC and which are put into circulation as of 27 May 2021 and registered in their territory, are fitted with an on-board weighing equipment. Vehicles put into circulation and registered before that date should not need to be retrofitted with such an equipment.

(9) The measures provided for in this Regulation are in accordance with the opinion of the Road Transport Committee, referred to in Article 10i of Directive 96/53/EC,

HAS ADOPTED THIS REGULATION:

Article 1

Scope

Article 2

Definitions

The following definitions shall apply:

(a) ‘on-board weighing equipment’ (‘OBW’) means the equipment on-board a vehicle that is able to determine the total weight or the axle weight;

(b) ‘total weight’ means the total weight of a motor vehicle and, in case of a vehicle combination, of the vehicle combination as determined by the OBW, in kilogram;

(c) ‘axle weight’ or ‘axle load’ means the weight of a laden axle or group of axles as determined by the OBW, in kilogram;

(d) ‘calculated weight’ or ‘weight value’ means either the total weight or the axle weight, in kilogram;

(e) ‘motor vehicle unit’ (‘MVU’) means the part of the OBW placed in the motor vehicle, excluding the sensors, able to collect, store, process data and to calculate a weight value resulting from those data;

(f) ‘trailer unit’ (‘TU’) means the part of the OBW placed in a trailer or semi-trailer, excluding the sensors, able to collect, store, process data from the trailer or semi-trailer equipment and to calculate axle weight values resulting from those data;

(g) ‘dedicated short range communication vehicle unit’ (‘DSRC-VU’) means the ‘remote early detection facility’, as referred to in Appendix 14 to Annex IC to Commission Implementing Regulation (EU) 2016/799 (5), able to receive the OWS data from either the MVU or the C-ITS station and to send it to the REDCR;

(h) ‘remote early detection communication reader’ (‘REDCR’) means the remote early detection communication reader held by the enforcement authorities, which is able to read the OWS data transmitted by the DSRC-VU. The REDCR may be the same device as the one used for reading the RTM data pursuant to Regulation (EU) 2016/799, although both the transmission of the RTM data and that of the OWS data shall be carried out under separate requests from the REDCR;

(i) ‘weight data’ means the raw data transmitted between elements of the OBW that must be processed in order to obtain the calculated weight;

(j) ‘on-board weighing system data’ (‘OWS data’) means the secured data of defined format requested by the REDCR from the DSRC-VU;

(k) ‘sensor’ means the element of the OBW that is able to generate weight data by measuring specific physical parameters, being those data used by either the MVU or the TU for further processing;

(l) ‘cooperative intelligent transport systems station’ (‘C-ITS station’) means the C-ITS station within the meaning of the delegated act supplementing Directive 2010/40/EU of the European Parliament and of the Council with regard to the deployment and operational use of cooperative intelligent transport systems, adopted on the basis of Article 6(1) of that Directive;

(m) ‘address assignment phase’ means the preliminary phase of electronic communication between vehicles of a vehicle combination whereby a position is assigned to each vehicle.

(n) ‘on-board weighing equipment workshop’ (‘OBW-workshop’) means a workshop authorised by a Member State to perform inspections of on-board weighing equipment.

Article 3

Certificates policy

Member States shall ensure that there is at least one root certification authority, an enrolment authority and an authorisation authority able to carry out, for the purpose of on-board weighing equipment, the functions set out in the Certificate Policy for Deployment and Operation of European Cooperative Intelligent Transport Systems (C-ITS) referred to in the delegated act supplementing Directive 2010/40/EU of the European Parliament and of the Council with regard to the deployment and operational use of cooperative intelligent transport systems, adopted on the basis of Article 6(1) of that Directive.

Article 4

Periodic inspections

(a) the on-board weighing equipment has been fitted in accordance with the documentation provided by the manufacturer and is appropriate for the vehicle;

(b) the on-board weighing equipment is working properly and accurately delivers the weight values;

(c) there are no manipulation devices attached to the on-board weighing equipment or traces of use of such devices.

(a) vehicle identification number (VIN number or chassis number);

(b) place and date of the test;

(c) test passed (yes/no);

(d) identified deficiencies, including manipulation, as well as the remedies adopted;

(e) date of the next periodic inspection or date of expiry of the current certificate, if this information is not provided by other means;

(f) Name, address and identification number of the OBW-workshop and signature or identification of the inspector responsible for the inspection;

(g) the mark, type, identification number, number of type examination certificate and date of last verification of the certified weighing device used for the periodic inspection.

Article 5

OBW-workshops

(a) the staff of the OBW-workshop is properly trained;

(b) the equipment necessary to carry out the relevant tests and tasks is available and has been certified according to Directive 2014/31/EU of the European Parliament and of the Council (6) or Directive 2014/32/EU of the European Parliament and of the Council (7);

(c) the workshops are of good repute.

(a) at least every five years, to an audit performed by a supervising body on the procedures applied when handling on-board weighing equipment. The audit shall focus on the tasks and activities laid down in point 1 of Annex V to Directive 2014/45/EU; the supervising body shall fulfil the requirements laid down in point 2 of that Annex;

(b) unannounced technical audits may also take place in order to check the installations, inspections and, where appropriate, calibrations carried out.

(a) workshop identification number and name of [entity/entities constituting] the workshop;

(b) postal address;

(c) email address;

(d) telephone number.

Article 6

Entry into force and application

This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.

It shall apply from 27 May 2021.

However, points 1.4(d), 5.3 and 8.1 of Annex I, Annex II and points 3, 8.2 and 10 of Annex III shall apply from 27 May 2024.

This Regulation shall be binding in its entirety and directly applicable in all Member States.

Done at Brussels, 12 July 2019.

For the Commission The President Jean-Claude JUNCKER

(1) Council Directive 96/53/EC of 25 July 1996 laying down for certain road vehicles circulating within the Community the maximum authorised dimensions in national and international traffic and the maximum authorised weights in international traffic (OJ L 235, 17.9.1996, p. 59).

(2) Directive 2010/40/EU of the European Parliament and of the Council of 7 July 2010 on the framework for the deployment of Intelligent Transport Systems in the field of road transport and for interfaces with other modes of transport (OJ L 207, 6.8.2010, p. 1).

(3) Directive 2014/45/EU of the European Parliament and of the Council of 3 April 2014 on periodic roadworthiness tests for motor vehicles and their trailers and repealing Directive 2009/40/EC (OJ L 127, 29.4.2014, p. 51).

(4) Regulation (EU) No 165/2014 of the European Parliament and of the Council of 4 February 2014 on tachographs in road transport, repealing Council Regulation (EEC) No 3821/85 on recording equipment in road transport and amending Regulation (EC) No 561/2006 of the European Parliament and of the Council on the harmonisation of certain social legislation relating to road transport (OJ L 60, 28.2.2014, p. 1).

(5) Commission Implementing Regulation (EU) 2016/799 of 18 March 2016 implementing Regulation (EU) No 165/2014 of the European Parliament and of the Council laying down the requirements for the construction, testing, installation, operation and repair of tachographs and their components (OJ L 139, 26.5.2016, p. 1).

(6) Directive 2014/31/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of Member States relating to the making available on the market of non-automatic weighing instruments (OJ L 96, 29.3.2014, p. 107).

(7) Directive 2014/32/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of Member States relating to the making available on the market of measuring instruments (OJ L 96, 29.3.2014, p. 149).