LegalizeCommission Implementing Regulation (EU) 2019/1965 of 26 November 2019 concerning the authorisation of sodium molybdate dihydrate as feed additive for sheep (Text with EEA relevance)
This is the act as published. Later amendments are not folded into the text below: each one is a separate act in this repository and an entry in this law's history.
| 28.11.2019 | EN | Official Journal of the European Union | L 307/12 |
THE EUROPEAN COMMISSION,
Having regard to the Treaty on the Functioning of the European Union,
Having regard to Regulation (EC) No 1831/2003 of the European Parliament and of the Council of 22 September 2003 on additives for use in animal nutrition 1, and in particular Article 9(2) thereof,
Whereas:
- (1) Regulation (EC) No 1831/2003 provides for the authorisation of additives for use in animal nutrition and for the grounds and procedures for granting such authorisation. Article 10(2) of that Regulation provides for the re-evaluation of additives authorised pursuant to Council Directive 70/524/EEC 2.
- (2) Sodium molybdate was authorised without a time limit as a feed additive for all animal species in accordance with Directive 70/524/EEC. This substance was subsequently entered in the Register of feed additives as an existing product, in accordance with Article 10(1) of Regulation (EC) No 1831/2003.
- (3) In accordance with Article 10(2) of Regulation (EC) No 1831/2003 in conjunction with Article 7 thereof, an application was submitted for the re-evaluation of sodium molybdate dihydrate as a feed additive for sheep.
- (4) The applicant requested sodium molybdate dihydrate to be classified in the additive category ‘nutritional additives’. The application was accompanied by the particulars and documents required under Article 7(3) of Regulation (EC) No 1831/2003.
- (5) The European Food Safety Authority (‘the Authority’) concluded in its opinion of 23 January 2019 3 that, under the proposed conditions of use, sodium molybdate dihydrate does not have adverse effects on animal health, consumer safety or the environment. It also concluded that the additive is considered as a skin and eye irritant. Therefore, the Commission considers that appropriate protective measures should be taken to prevent adverse effects on human health, in particular as regards the users of the additive. Moreover, the Authority concluded that molybdenum supplementation in sheep feed with sodium molybdate dihydrate is considered effective in order to guarantee an adequate balance with copper, when the copper to molybdenum ratio in the diet is in the range 3-10. The Authority does not consider that there is a need for specific requirements of post-market monitoring. It also verified the reports on the method of analysis of the feed additives in feed submitted by the Reference Laboratory set up by Article 21 of Regulation (EC) No 1831/2003.
- (6) The assessment of sodium molybdate dihydrate shows that the conditions for authorisation, as provided for in Article 5 of Regulation (EC) No 1831/2003, are satisfied.
- (7) Since safety reasons do not require the immediate application of the modifications to the conditions of authorisation for the substance sodium molybdate dihydrate, it is appropriate to allow a transitional period for interested parties to prepare themselves to meet the new requirements resulting from the authorisation.
- (8) The measures provided for in this Regulation are in accordance with the opinion of the Standing Committee on Plants, Animals, Food and Feed,
HAS ADOPTED THIS REGULATION:
Article 1
Authorisation
The substance specified in the Annex, belonging to the additive category ‘nutritional additives’ and to the functional group ‘compounds of trace elements’, is authorised as feed additive in animal nutrition, subject to the conditions laid down in that Annex.
Article 2
Transitional measures
Sodium molybdate dihydrate and premixtures containing that substance, which are produced and labelled before 18 June 2020 in accordance with the rules applicable before 18 December 2019 may continue to be placed on the market and used until the existing stocks are exhausted.
Feed materials and compound feed containing sodium molybdate dihydrate which are produced and labelled before 18 December 2020 in accordance with the rules applicable before 18 December 2019 may continue to be placed on the market and used until the existing stocks are exhausted if they are intended for food-producing animals.
Feed materials and compound feed containing sodium molybdate dihydrate which are produced and labelled before 18 December 2021 in accordance with the rules applicable before 18 December 2019 may continue to be placed on the market and used until the existing stocks are exhausted if they are intended for non-food-producing animals.
Article 3
Entry into force
This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.
This Regulation shall be binding in its entirety and directly applicable in all Member States.
Done at Brussels, 26 November 2019.
For the Commission
The President
Jean-Claude JUNCKER
Council Directive 70/524/EEC of 23 November 1970 concerning additives in feedingstuffs (OJ L 270, 14.12.1970, p. 1).
EFSA Journal 2019;17(2):5606.
ANNEX
| Identification number of the additive | Name of the holder of authorisation | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | Minimum content | Maximum content | Other provisions | End of period of authorisation |
|---|---|---|---|---|---|---|---|---|---|
| Identification number of the additive | Name of the holder of authorisation | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | Content of element (Mo) in mg/kg of complete feed with a moisture content of 12 % | Content of element (Mo) in mg/kg of complete feed with a moisture content of 12 % | Other provisions | End of period of authorisation |
| Category of nutritional additives. Functional group: compounds of trace elements | Category of nutritional additives. Functional group: compounds of trace elements | Category of nutritional additives. Functional group: compounds of trace elements | Category of nutritional additives. Functional group: compounds of trace elements | Category of nutritional additives. Functional group: compounds of trace elements | Category of nutritional additives. Functional group: compounds of trace elements | Category of nutritional additives. Functional group: compounds of trace elements | Category of nutritional additives. Functional group: compounds of trace elements | Category of nutritional additives. Functional group: compounds of trace elements | Category of nutritional additives. Functional group: compounds of trace elements |
| 3b701 | - | Sodium molybdate dihydrate | Additive composition: Sodium molybdate dihydrate as a powder with a minimum content of 37 % molybdenum. Characterisation of the active substance: Chemical formula: Na2MoO4. 2 H2O CAS number: 10102-40-6 Analytical methods [^ntr1-L_2019307EN.01001401-E0001]: For the quantification of total molybdenum in the feed additive, premixtures, feed materials and compound feed: — EN 15510: Inductively Coupled Plasma — Atomic Emission Spectrometry (ICP- AES) For the quantification of total sodium in the feed additive: — EN 15510: Inductively Coupled Plasma — Atomic Emission Spectrometry (ICP- AES); or — EN ISO 6869: Atomic Absorption Spectrometry (AAS) | Sheep | - | - | 2,5 (total) | 1. The additive shall be incorporated into feed in the form of a premixture. 2. For users of the additive and premixtures, feed business operators shall establish operational procedures and appropriate organisational measures to address the potential risks by dermal or eyes contact. Where risks cannot be reduced to an acceptable level by those procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment. 3. The labelling of the additive and premixtures shall indicate the following: ‘Molybdenum supplementation in sheep feed shall result in a Cu:Mo ratio in the diet in the range of 3-10, in order to guarantee an adequate balance with copper’. | 18.12.2029 |
Details of the analytical methods are available at the following address of the Reference Laboratory: https://ec.europa.eu/jrc/eurl/feed-additives/evaluation-reports
Reading this document does not replace reading the official text published in the Official Journal of the European Union. We assume no responsibility for any inaccuracies arising from the conversion of the original to this format.
This text is published under EUR-Lex's own terms of reuse, not a Legalize or public-domain licence.
EUR-Lex
Creative Commons Attribution 4.0 International (CC BY 4.0)
© European Union, https://eur-lex.europa.eu — Source: EUR-Lex (Publications Office of the European Union). Reused under the Creative Commons Attribution 4.0 International (CC BY 4.0) licence. Only EU legislation published in the printed Official Journal of the European Union is deemed authentic; consolidated texts are reproduced here for documentation purposes and have been reformatted to Markdown.