Legalize / European Union / Implementing Regulation

Commission Implementing Regulation (EU) 2019/2076 of 29 November 2019 granting a Union authorisation for the biocidal product family Contec IPA Product Family (Text with EEA relevance)

Type Implementing Regulation

Publication 2019-11-29

State In force

Department European Commission, SANTE

Source EUR-Lex

Article 1

A Union authorisation with authorisation number EU-0020460-0000 is granted to Contec Europe for the making available on the market and use of the biocidal product family ‘Contec IPA Product Family’, subject to compliance with the terms and conditions set out in Annex I and in accordance with the summary of the biocidal product characteristics set out in Annex II.

The Union authorisation is valid from 26 December 2019 until 30 November 2029.

Article 2

This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.

This Regulation shall be binding in its entirety and directly applicable in all Member States.

ANNEX I

The authorisation holder shall conduct a long-term storage test at ambient temperature for wipes in their commercial packaging.

By 31 July 2021 the authorisation holder shall submit the results of the test to the Agency.

ANNEX II

Summary of product characteristics for a biocidal product family

Contec IPA Product Family

Product type(s)

PT02: Disinfectants and algaecides not intended for direct application to humans or animals

PT04: Food and feed area

Authorisation number EU-0020460-0000

R4BP asset number EU-0020460-0000

PART I

FIRST INFORMATION LEVEL

Name	Contec IPA Product Family
Product type(s)	PT02: Disinfectants and algaecides not intended for direct application to humans or animals PT04: Food and feed area
---	---
Name and address of the authorisation holder	Name
---	---
Address	Zl Du Prat Avenue Paul Duplaix 56000 Vannes France
Authorisation number
R4BP asset number
Date of the authorisation
Expiry date of the authorisation
Name of manufacturer	Contec Inc.
---	---
Address of manufacturer	525 Locust Grove SC 29303 Spartanburg United States (the)
Location of manufacturing sites	Contec Inc. site 1 525 Locust Grove SC 29303 Spartanburg United States (the)
Name of manufacturer	Contec Cleanroom Technology (Suzhou) Co., Ltd. China
---	---
Address of manufacturer	17 Longyun Road, Suzhou Industrial Park 215024 Suzhou China
Location of manufacturing sites	Contec Cleanroom Technology (Suzhou) Co., Ltd. China site 1 17 Longyun Road, Suzhou Industrial Park 215024 Suzhou China
Name of manufacturer	Contec Cleanroom (UK) Ltd
---	---
Address of manufacturer	Unit 6A, Wansbeck Business Park, Rotary Parkway NE63 8QW Ashington, Northumberland United Kingdom of Great Britain and Northern Ireland (the)
Location of manufacturing sites	Contec Cleanroom (UK) Ltd site 1 Unit 6A, Wansbeck Business Park, Rotary Parkway NE63 8QW Ashington, Northumberland United Kingdom of Great Britain and Northern Ireland (the)
Name of manufacturer	Flexible Medical Packaging
---	---
Address of manufacturer	Unit 8 Hightown, White Cross Industrial Estate LA1 4XS Lancaster, Lancashire United Kingdom of Great Britain and Northern Ireland (the)
Location of manufacturing sites	Flexible Medical Packaging site 1 Unit 8 Hightown, White Cross Industrial Estate LA1 4XS Lancaster, Lancashire United Kingdom of Great Britain and Northern Ireland (the)
Name of manufacturer	VWR International BVBA
---	---
Address of manufacturer	Researchpark Haasrode 2020, Geldenaaksebaan 464 B-3001 Leuven Belgium
Location of manufacturing sites	VWR International BVBA site 1 Researchpark Haasrode 2020, Geldenaaksebaan 464 B-3001 Leuven Belgium
Active substance	propan-2-ol
---	---
Name of manufacturer	Brenntag GmbH
Address of manufacturer	Messeallee 11 45131 Essen Germany
Location of manufacturing sites	Brenntag GmbH site 1 Haven 3222, Vondelingenweg 601 3196 KK Vondelingenplaat Netherlands (the)
Active substance	propan-2-ol
---	---
Name of manufacturer	INEOS Solvents Germany GmbH
Address of manufacturer	Römerstraße 733 47443 Moers Germany
Location of manufacturing sites	INEOS Solvents Germany GmbH site 1 Römerstraße 733 47443 Moers Germany
Common name	IUPAC name
---	---
propan-2-ol
Formulation type(s)	AL (any other liquid) – RTU wipe AL (any other liquid) - RTU solution/trigger spray
---	---

PART II

SECOND INFORMATION LEVEL - META SPC(S)

Identifier	Meta SPC: Contec IPA Liquid Products
Number	1-1
---	---
Product type(s)	PT02: Disinfectants and algaecides not intended for direct application to humans or animals PT04: Food and feed area
---	---
Common name	IUPAC name
---	---
propan-2-ol
Formulation type(s)	AL (any other liquid) - RTU solution/trigger spray
---	---
Hazard statements	H225: Highly flammable liquid and vapour. H319: Causes serious eye irritation. H336: May cause drowsiness or dizziness. EUH066: Repeated exposure may cause skin dryness or cracking.
---	---
Precautionary statements	P101: If medical advice is needed, have product container or label at hand. P102: Keep out of reach of children. P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P233: Keep container tightly closed. P261: Avoid breathing vapours. P264: Wash hands thoroughly after handling. P271: Use only outdoors or in a well-ventilated area. P280: Wear eye protection. P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing. P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P312: Call a Poison centre if you feel unwell. P337+P313: If eye irritation persists: Get medical advice. P370+P378: In case of fire: Use alcohol resistant foam to extinguish. P403+P235: Store in a well-ventilated place. Keep cool. P405: Store locked up. P501: Dispose of contents/container in accordance with local regulations.
Product type	PT02: Disinfectants and algaecides not intended for direct application to humans or animals PT04: Food and feed area
---	---
Where relevant, an exact description of the authorised use	Disinfectant for use against bacteria, mycobacteria and yeast on hard, non-porous surfaces in cleanrooms for biotechnology, pharmaceutical, manufacture of medical devices, healthcare industries and other critical life science applications and in industrial food and feed preparation areas.” Acceptable use temperature: room temperature (20±2°C)
Target organism(s) (including development stage)	Scientific name: Bacteria Common name: Bacteria Development stage: - Scientific name: Mycobacteriaceae Common name: Mycobacteria Development stage: - Scientific name: Yeast Common name: Yeasts Development stage: -
Field(s) of use	indoor use
Application method(s)	Method: Spraying and wiping Detailed description: -
Application rate(s) and frequency	Application rate: 50 ml product per m² of surface. Number and timing of application: Wiping: 1 minute contact time for bacteria and mycobacteria 3 minutes contact time for yeast
Category(ies) of users	professional
Pack sizes and packaging material	High-density polyethylene (HDPE) trigger spray bottle – 0,5 litre – 1 litre HDPE capped refill bottle - 1 litre, 2 litres and 5 litres

See section 5.1

See section 5.2

See section 5.3

See section 5.4

See section 5.5

Use at room temperature. For visibly soiled surfaces, cleaning prior to disinfection is required.

Wiping: Apply/Spray product to a suitable quality cleanroom wipe. Ensure the wipe is sufficiently and uniformly saturated before wiping the surface to be disinfected.

Ensure the surface is uniformly covered with the product then wipe to dry with a sterile cleanroom wipe.

Contact times: Wiping 1 minute for bacteria and mycobacteria 3 minutes for yeast.

Used wipes must be disposed of in a closed container.

Wash hands and exposed skin before meals and after use.

Avoid contact with eyes

For use in cleanrooms, adequate technical/engineering controls to remove airborne residues is mandatory e.g. room ventilation or LEV

Likely direct or indirect adverse effects:

Headache, vertigo, hallucinations, respiratory depression, CNS depression or coma.

Severe irritation of the eyes and or ocular damage.

Nausea, vomiting, diarrhea and hemorrhagic gastritis.

Pulmonary aspiration hazard may induce pneumonitis, hypotension and hypoglycemia.

First aid measures:

Relocate the individual from the exposure source and remove any contaminated/spattered clothing articles.

Eye contact: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention

Skin contact; wash affected area with plenty of water and soap, No scrubbing.

In case of ingestion; Do NOT induce vomiting and never give anything by mouth to an impaired or unconscious individual; if the individual is unconscious place individual in left sideways (recovery) position with the head lowered and the knees bent.

Keep the individual calm and at rest, conserve body temperature and control breathing. If necessary check for pulse and initiate artificial respiration.

Take the individual to a healthcare center and bring packaging or label whenever possible.

NEVER LEAVE THE AFFECTED INDIVIDUAL UNATTENDED!

Advice for medical and healthcare personnel:

Monitor vital signs and provide symptomatic and supportive treatment.

Evaluate endoscopic procedure in case of ingestion.

Monitor glycaemia and ketones.

Ipecac use is contraindicated.

WHEN ASKING FOR MEDICAL ADVICE KEEP PACKAGING OR LABEL AT HAND AND CALL YOUR LOCAL POISON CONTROL CENTER 111.

Dispose of contents/container in accordance with local regulations.

Do not re-use empty container for any other purpose.

Store in a cool, dry, well-ventilated place in original container.

Keep away from sources of ignition.

Keep away from direct sunlight.

Keep container tightly closed.

Shelf-life: 2 years

The product contains propan-2-ol (CAS No: 67-63-0), for which an European reference value of 129,28 mg/m³ for the professional user was agreed and used for the risk assessment of the product

Trade name(s)	Contec IPA	Market area: EU
Contec Sterile IPA	Market area: EU
Ipasept	Market area: EU
Authorisation number		EU-0020460-0001 1-1
Common name	IUPAC name	Function	CAS number	EC number	Content (%)
propan-2-ol		active substance	67-63-0	200-661-7	62,9 % (w/w)
Identifier	Meta SPC: Contec IPA Wipes
---	---
Number	1-2
---	---
Product type(s)	PT02: Disinfectants and algaecides not intended for direct application to humans or animals PT04: Food and feed area
---	---
Common name	IUPAC name	Function	CAS number	EC number	Content (%)
---	---	---	---	---	---
propan-2-ol		active substance	67-63-0	200-661-7	62,9 - 62,9 % (w/w)
Formulation type(s)	AL (any other liquid) – RTU wipe
---	---
Hazard statements	H225: Highly flammable liquid and vapour. H319: Causes serious eye irritation. H336: May cause drowsiness or dizziness. EUH066: Repeated exposure may cause skin dryness or cracking.
---	---
Precautionary statements	P101: If medical advice is needed, have product container or label at hand. P102: Keep out of reach of children. P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P233: Keep container tightly closed. P261: Avoid breathing vapours. P264: Wash hands thoroughly after handling. P271: Use only outdoors or in a well-ventilated area. P280: Wear eye protection. P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing. P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P312: Call a POISON CENTER if you feel unwell. P337+P313: If eye irritation persists: Get medical advice. P370+P378: In case of fire: Use alcohol resistant foam to extinguish. P403+P235: Store in a well-ventilated place. Keep cool. P405: Store locked up. P501: Dispose of contents to container in accordance with local regulations.
Product type	PT02: Disinfectants and algaecides not intended for direct application to humans or animals PT04: Food and feed area
---	---
Where relevant, an exact description of the authorised use	Disinfectant for use against bacteria, mycobacteria and yeast on hard, non-porous surfaces in cleanrooms for biotechnology, pharmaceutical, manufacture of medical devices, healthcare industries and other critical life science applications and in industrial food and feed preparation areas.” Acceptable use temperature: room temperature (20±2°C)
Target organism(s) (including development stage)	Scientific name: Bacteria Common name: Bacteria Development stage: - Scientific name: Mycobacteriaceae Common name: Mycobacteria Development stage: - Scientific name: Yeast Common name: Yeasts Development stage: -
Field(s) of use	indoor use
Application method(s)	Method: Wiping Detailed description: -
Application rate(s) and frequency	Application rate: - Number and timing of application: 1 minute contact time for bacteria and mycobacteria 3 minutes contact time for yeast
Category(ies) of users	professional
Pack sizes and packaging material	Impregnated 100 % polypropylene wipes in: — HDPE canister with HDPE cap – 150 wipes (1,7 or 2,15 L) — Polyethylene terephthalate ( PET)/polyethylene (PE) packet sealed with PET/PE flow wrap – 30, 40 or 50 wipes Impregnated 100 % polyester wipes in: — HDPE canister with HDPE cap – 100 wipes (2,25 L) — PET/PE packet sealed with PET/PE flow wrap – 20 wipes Impregnated 100 % knitted polyester wipes in: — PET/PE packet sealed with PET/PE flow wrap – 8, 10, 20, 30 or 50 wipes Impregnated 55 % cellulose / 45% polyester wipes in: — HDPE canister with HDPE cap – 100 wipes (2,25 L) — PET/PE packet sealed with PET/PE flow wrap – 24, 30, 50 or 75 wipes Impregnated 50 % rayon / 50% polyester wipes in: — HDPE canister with HDPE cap - 700 wipes (11,4 L)