Council Decision (EU) 2020/1532 of 12 October 2020 on the position to be taken, on behalf of the European Union, in the 66th session of the Harmonized System Committee of the World Customs Organization in relation to the envisaged adoption of Classification Opinions, classification decisions, amendments to the Harmonized System Explanatory Notes or other advice on the interpretation of the Harmonized System, and of recommendations to secure uniformity in the interpretation of the Harmonized System under the Harmonized System Convention

Type Decision
Publication 2020-10-22
State In force
Department Council of the European Union
Source EUR-Lex
articles 3
Reform history JSON API

Article 1

The position to be taken, on behalf of the Union, in the 66th session of the Harmonized System Committee of the World Customs Organization on the approval of Explanatory Notes, Classification Opinions or other advice on the interpretation of the Harmonized System and of recommendations to secure uniformity in the interpretation of the Harmonized System under the HS Convention, is set out in the Annex.

Article 2

Minor technical changes to the position referred to in Article 1 may be agreed upon by the representatives of the Union without further decision of the Council.

Article 3

This Decision shall enter into force on the date of its adoption.

ANNEX

This Annex supplements the Annex to Decision (EU) 2020/1410.

II.2.   Development of correlation tables between the 2017 and 2022 versions of the Harmonized System (Doc. NC2704, NC2749 and NC2753)

Concerning the correlation table for subheadings 4407.13 and 4407.14 (mixtures of S-P-F (spruce, pine and fir) and Hem-fir (Western hemlock and fir)), the Union shall support the correlations proposed by the WCO Secretariat in paragraph 20 of document NC2753.

Concerning the correlation table for subheading 4418.83 (I beams), the Union shall support the correlations proposed by Japan in paragraph 14 of document NC2753.

Concerning the correlation table for subheading 7019.71 (veils/thin sheets of glass fibres), the Union notes that the only transfer from HS 2017 would be from subheading 7019.32.

Concerning the correlation table for subheadings 8462.62 and 8462.63 (forging machines), the Union shall support keeping all the subheadings proposed for transfer mentioned under HS 2017, including the ones in square brackets.

Concerning the correlation table for subheading 8519.81 (telephone answering machines), the Union shall support the proposal of the WCO Secretariat in paragraph 26 of document NC2704.

Concerning the correlation table for subheading 8539.51 (LED), the Union shall support the WCO Secretariat’s conclusion in paragraph 24 of document NC2704.

Concerning the correlation table for new subheading 8541.51 (semiconductor-based transducers), the Union notes that there is no evidence of parts classified separately in the HS 2017 version. Therefore no additional transfers are needed.

Concerning the correlation table for heading 88.06 (unmanned aircraft), the Union shall support option (i) mentioned in paragraph 25 of document NC2704.

Finally, the Union shall support the correction of some editorial errors in the draft Correlation Tables I and II, as set out in the Annex to document NC2753.

III.4.   Classification in HS 2022 of certain collections and collectors’ pieces of numismatic interest (Request by the Secretariat) (Doc. NC2711, NC2754)

The Union would classify the three products in the new subheading 9705.31 in HS 2022. The Union notes that both Canada and the WCO Secretariat support the Union’s proposal to delete the mention of the ‘coins generally known in the trade as ‘ancients’ or ‘ancient coins’ ’ from the second paragraph of Item (4) of new Part (A) of HSENs to heading 97.05.

III.5.   Classification in HS 2022 of cartridges for 3D printers (Request by the Secretariat) (Doc. NC2712, NC2755)

The Union shall support the proposal for amending the HSENs which specifies that 3D printer cartridges with electronic components or mechanical mechanisms should be classified as parts of 3D printers.

The Union would classify products presented in both documents NC2712 and NC2755 in heading 84.85 in HS 2022 as parts of 3D printers considering the presence of electronic components for connection to a 3D printer.

III.7.   Report of the 57th Session of the HS Review Sub-Committee (Doc. NR1434)

III.8.   Matters for decision (Doc. NC2709)

The Union shall agree to all proposed amendments in those documents.

III.9.   Possible amendment of the Explanatory Note to heading 71.04 in relation to synthetic diamonds (Proposal by the Kimberley Process) (Doc. NC2757)

The Union shall agree to the proposed modifications to the new third paragraph to heading 71.04 and to the creation of new item (3) of the subheading Explanatory Notes to subheading 7104.91.

III.10.   Classification of a micro-electro-mechanical systems (MEMS) element in HS 2022 (Proposal by the Secretariat)

The Union would classify the product in heading 85.41.

Reading this document does not replace reading the official text published in the Official Journal of the European Union. We assume no responsibility for any inaccuracies arising from the conversion of the original to this format.

This text is published under EUR-Lex's own terms of reuse, not a Legalize or public-domain licence. EUR-Lex
Creative Commons Attribution 4.0 International (CC BY 4.0)
© European Union, https://eur-lex.europa.eu — Source: EUR-Lex (Publications Office of the European Union). Reused under the Creative Commons Attribution 4.0 International (CC BY 4.0) licence. Only EU legislation published in the printed Official Journal of the European Union is deemed authentic; consolidated texts are reproduced here for documentation purposes and have been reformatted to Markdown.