LegalizeCommission Implementing Regulation (EU) 2020/1577 of 21 September 2020 amending Annex I to Council Regulation (EEC) No 2658/87 on the tariff and statistical nomenclature and on the Common Customs Tariff
| CN code | Description | Conventional rate of duty (%) | Supplementary unit |
|---|---|---|---|
| 1 | 2 | 3 | 4 |
| I. PRIMARY MATERIALS; PRODUCTS IN GRANULAR OR POWDER FORM | |||
| 7201 | Pig iron and spiegeleisen in pigs, blocks or other primary forms : | ||
| 7201 10 | – Non-alloy pig iron containing by weight 0,5 % or less of phosphorus : | ||
| – – Containing by weight not less than 0,4 % of manganese: | |||
| 7201 10 11 | – – – Containing by weight 1 % or less of silicon | 1,7 | — |
| 7201 10 19 | – – – Containing by weight more than 1 % of silicon | 1,7 | — |
| 7201 10 30 | – – Containing by weight not less than 0,1 % but less than 0,4 % of manganese | 1,7 | — |
| 7201 10 90 | – – Containing by weight less than 0,1 % of manganese | Free | — |
| 7201 20 00 | – Non-alloy pig iron containing by weight more than 0,5 % of phosphorus | 2,2 | — |
| 7201 50 | – Alloy pig iron; spiegeleisen : | ||
| 7201 50 10 | – – Alloy pig iron containing by weight not less than 0,3 % but not more than 1 % of titanium and not less than 0,5 % but not more than 1 % of vanadium | Free | — |
| 7201 50 90 | – – Other | 1,7 | — |
| 7202 | Ferro-alloys : | ||
| – Ferro-manganese : | |||
| 7202 11 | – – Containing by weight more than 2 % of carbon : | ||
| 7202 11 20 | – – – With a granulometry not exceeding 5 mm and a manganese content by weight exceeding 65 % | 2,7 | — |
| 7202 11 80 | – – – Other | 2,7 | — |
| 7202 19 00 | – – Other | 2,7 | — |
| – Ferro-silicon : | |||
| 7202 21 00 | – – Containing by weight more than 55 % of silicon | 5,7 (1) | — |
| 7202 29 | – – Other : | ||
| 7202 29 10 | – – – Containing by weight 4 % or more but not more than 10 % of magnesium | 5,7 (1) | — |
| 7202 29 90 | – – – Other | 5,7 (1) | — |
| 7202 30 00 | – Ferro-silico-manganese | 3,7 (1) | — |
| – Ferro-chromium : | |||
| 7202 41 | – – Containing by weight more than 4 % of carbon : | ||
| 7202 41 10 | – – – Containing by weight more than 4 % but not more than 6 % of carbon | 4 | — |
| 7202 41 90 | – – – Containing by weight more than 6 % of carbon | 4 | — |
| 7202 49 | – – Other : | ||
| 7202 49 10 | – – – Containing by weight not more than 0,05 % of carbon | 7 (1) | — |
| 7202 49 50 | – – – Containing by weight more than 0,05 % but not more than 0,5 % of carbon | 7 (1) | — |
| 7202 49 90 | – – – Containing by weight more than 0,5 % but not more than 4 % of carbon | 7 | — |
| 7202 50 00 | – Ferro-silico-chromium | 2,7 | — |
| 7202 60 00 | – Ferro-nickel | Free | — |
| 7202 70 00 | – Ferro-molybdenum | 2,7 | — |
| 7202 80 00 | – Ferro-tungsten and ferro-silico-tungsten | Free | — |
| – Other : | |||
| 7202 91 00 | – – Ferro-titanium and ferro-silico-titanium | 2,7 | — |
| 7202 92 00 | – – Ferro-vanadium | 2,7 | — |
| 7202 93 00 | – – Ferro-niobium | Free | — |
| 7202 99 | – – Other : | ||
| 7202 99 10 | – – – Ferro-phosphorus | Free | — |
| 7202 99 30 | – – – Ferro-silico-magnesium | 2,7 | — |
| 7202 99 80 | – – – Other | 2,7 | — |
| 7203 | Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99,94 %, in lumps, pellets or similar forms : | ||
| 7203 10 00 | – Ferrous products obtained by direct reduction of iron ore | Free | — |
| 7203 90 00 | – Other | Free | — |
| 7204 | Ferrous waste and scrap; remelting scrap ingots of iron or steel : | ||
| 7204 10 00 | – Waste and scrap of cast iron | Free | — |
| – Waste and scrap of alloy steel : | |||
| 7204 21 | – – Of stainless steel : | ||
| 7204 21 10 | – – – Containing by weight 8 % or more of nickel | Free | — |
| 7204 21 90 | – – – Other | Free | — |
| 7204 29 00 | – – Other | Free | — |
| 7204 30 00 | – Waste and scrap of tinned iron or steel | Free | — |
| – Other waste and scrap : | |||
| 7204 41 | – – Turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundles : | ||
| 7204 41 10 | – – – Turnings, shavings, chips, milling waste, sawdust and filings | Free | — |
| – – – Trimmings and stampings: | |||
| 7204 41 91 | – – – – In bundles | Free | — |
| 7204 41 99 | – – – – Other | Free | — |
| 7204 49 | – – Other : | ||
| 7204 49 10 | – – – Fragmentised (shredded) | Free | — |
| – – – Other: | |||
| 7204 49 30 | – – – – In bundles | Free | — |
| 7204 49 90 | – – – – Other | Free | — |
| 7204 50 00 | – Remelting scrap ingots | Free | — |
| 7205 | Granules and powders, of pig iron, spiegeleisen, iron or steel : | ||
| 7205 10 00 | – Granules | Free | — |
| – Powders : | |||
| 7205 21 00 | – – Of alloy steel | Free | — |
| 7205 29 00 | – – Other | Free | — |
| II. IRON AND NON-ALLOY STEEL | |||
| 7206 | Iron and non-alloy steel in ingots or other primary forms (excluding iron of heading 7203 ) : | ||
| 7206 10 00 | – Ingots | Free | — |
| 7206 90 00 | – Other | Free | — |
| 7207 | Semi-finished products of iron or non-alloy steel : | ||
| – Containing by weight less than 0,25 % of carbon : | |||
| 7207 11 | – – Of rectangular (including square) cross-section, the width measuring less than twice the thickness : | ||
| – – – Rolled or obtained by continuous casting: | |||
| 7207 11 11 | – – – – Of free-cutting steel | Free | — |
| – – – – Other: | |||
| 7207 11 14 | – – – – – Of a thickness not exceeding 130 mm | Free | — |
| 7207 11 16 | – – – – – Of a thickness exceeding 130 mm | Free | — |
| 7207 11 90 | – – – Forged | Free | — |
| 7207 12 | – – Other, of rectangular (other than square) cross-section : | ||
| 7207 12 10 | – – – Rolled or obtained by continuous casting | Free | — |
| 7207 12 90 | – – – Forged | Free | — |
| 7207 19 | – – Other : | ||
| – – – Of circular or polygonal cross-section: | |||
| 7207 19 12 | – – – – Rolled or obtained by continuous casting | Free | — |
| 7207 19 19 | – – – – Forged | Free | — |
| 7207 19 80 | – – – Other | Free | — |
| 7207 20 | – Containing by weight 0,25 % or more of carbon : | ||
| – – Of rectangular (including square) cross-section, the width measuring less than twice the thickness: | |||
| – – – Rolled or obtained by continuous casting: | |||
| 7207 20 11 | – – – – Of free-cutting steel | Free | — |
| – – – – Other, containing by weight: | |||
| 7207 20 15 | – – – – – 0,25 % or more but less than 0,6 % of carbon | Free | — |
| 7207 20 17 | – – – – – 0,6 % or more of carbon | Free | — |
| 7207 20 19 | – – – Forged | Free | — |
| – – Other, of rectangular (other than square) cross-section: | |||
| 7207 20 32 | – – – Rolled or obtained by continuous casting | Free | — |
| 7207 20 39 | – – – Forged | Free | — |
| – – Of circular or polygonal cross-section: | |||
| 7207 20 52 | – – – Rolled or obtained by continuous casting | Free | — |
| 7207 20 59 | – – – Forged | Free | — |
| 7207 20 80 | – – Other | Free | — |
| 7208 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated : | ||
| 7208 10 00 | – In coils, not further worked than hot-rolled, with patterns in relief | Free | — |
| – Other, in coils, not further worked than hot-rolled, pickled : | |||
| 7208 25 00 | – – Of a thickness of 4,75 mm or more | Free | — |
| 7208 26 00 | – – Of a thickness of 3 mm or more but less than 4,75 mm | Free | — |
| 7208 27 00 | – – Of a thickness of less than 3 mm | Free | — |
| – Other, in coils, not further worked than hot-rolled : | |||
| 7208 36 00 | – – Of a thickness exceeding 10 mm | Free | — |
| 7208 37 00 | – – Of a thickness of 4,75 mm or more but not exceeding 10 mm | Free | — |
| 7208 38 00 | – – Of a thickness of 3 mm or more but less than 4,75 mm | Free | — |
| 7208 39 00 | – – Of a thickness of less than 3 mm | Free | — |
| 7208 40 00 | – Not in coils, not further worked than hot-rolled, with patterns in relief | Free | — |
| – Other, not in coils, not further worked than hot-rolled : | |||
| 7208 51 | – – Of a thickness exceeding 10 mm : | ||
| 7208 51 20 | – – – Of a thickness exceeding 15 mm | Free | — |
| – – – Of a thickness exceeding 10 mm but not exceeding 15 mm, of a width of: | |||
| 7208 51 91 | – – – – 2 050 mm or more | Free | — |
| 7208 51 98 | – – – – Less than 2 050 mm | Free | — |
| 7208 52 | – – Of a thickness of 4,75 mm or more but not exceeding 10 mm : | ||
| 7208 52 10 | – – – Rolled on four faces or in a closed box pass, of a width not exceeding 1 250 mm | Free | — |
| – – – Other, of a width of: | |||
| 7208 52 91 | – – – – 2 050 mm or more | Free | — |
| 7208 52 99 | – – – – Less than 2 050 mm | Free | — |
| 7208 53 | – – Of a thickness of 3 mm or more but less than 4,75 mm : | ||
| 7208 53 10 | – – – Rolled on four faces or in a closed box pass, of a width not exceeding 1 250 mm and of a thickness of 4 mm or more | Free | — |
| 7208 53 90 | – – – Other | Free | — |
| 7208 54 00 | – – Of a thickness of less than 3 mm | Free | — |
| 7208 90 | – Other : | ||
| 7208 90 20 | – – Perforated | Free | — |
| 7208 90 80 | – – Other | Free | — |
| 7209 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated : | ||
| – In coils, not further worked than cold-rolled (cold-reduced) : | |||
| 7209 15 00 | – – Of a thickness of 3 mm or more | Free | — |
| 7209 16 | – – Of a thickness exceeding 1 mm but less than 3 mm : | ||
| 7209 16 10 | – – – ‘Electrical’ | Free | — |
| 7209 16 90 | – – – Other | Free | — |
| 7209 17 | – – Of a thickness of 0,5 mm or more but not exceeding 1 mm : | ||
| 7209 17 10 | – – – ‘Electrical’ | Free | — |
| 7209 17 90 | – – – Other | Free | — |
| 7209 18 | – – Of a thickness of less than 0,5 mm : | ||
| 7209 18 10 | – – – ‘Electrical’ | Free | — |
| – – – Other: | |||
| 7209 18 91 | – – – – Of a thickness of 0,35 mm or more but less than 0,5 mm | Free | — |
| 7209 18 99 | – – – – Of a thickness of less than 0,35 mm | Free | — |
| – Not in coils, not further worked than cold-rolled (cold-reduced) : | |||
| 7209 25 00 | – – Of a thickness of 3 mm or more | Free | — |
| 7209 26 | – – Of a thickness exceeding 1 mm but less than 3 mm : | ||
| 7209 26 10 | – – – ‘Electrical’ | Free | — |
| 7209 26 90 | – – – Other | Free | — |
| 7209 27 | – – Of a thickness of 0,5 mm or more but not exceeding 1 mm : | ||
| 7209 27 10 | – – – ‘Electrical’ | Free | — |
| 7209 27 90 | – – – Other | Free | — |
| 7209 28 | – – Of a thickness of less than 0,5 mm : | ||
| 7209 28 10 | – – – ‘Electrical’ | Free | — |
| 7209 28 90 | – – – Other | Free | — |
| 7209 90 | – Other : | ||
| 7209 90 20 | – – Perforated | Free | — |
| 7209 90 80 | – – Other | Free | — |
| 7210 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated : | ||
| – Plated or coated with tin : | |||
| 7210 11 00 | – – Of a thickness of 0,5 mm or more | Free | — |
| 7210 12 | – – Of a thickness of less than 0,5 mm : | ||
| 7210 12 20 | – – – Tinplate | Free | — |
| 7210 12 80 | – – – Other | Free | — |
| 7210 20 00 | – Plated or coated with lead, including terne-plate | Free | — |
| 7210 30 00 | – Electrolytically plated or coated with zinc | Free | — |
| – Otherwise plated or coated with zinc : | |||
| 7210 41 00 | – – Corrugated | Free | — |
| 7210 49 00 | – – Other | Free | — |
| 7210 50 00 | – Plated or coated with chromium oxides or with chromium and chromium oxides | Free | — |
| – Plated or coated with aluminium : | |||
| 7210 61 00 | – – Plated or coated with aluminium-zinc alloys | Free | — |
| 7210 69 00 | – – Other | Free | — |
| 7210 70 | – Painted, varnished or coated with plastics : | ||
| 7210 70 10 | – – Tinplate, varnished; products, plated or coated with chromium oxides or with chromium and chromium oxides, varnished | Free | — |
| 7210 70 80 | – – Other | Free | — |
| 7210 90 | – Other : | ||
| 7210 90 30 | – – Clad | Free | — |
| 7210 90 40 | – – Tinned and printed | Free | — |
| 7210 90 80 | – – Other | Free | — |
| 7211 | Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated : | ||
| – Not further worked than hot-rolled : | |||
| 7211 13 00 | – – Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief | Free | — |
| 7211 14 00 | – – Other, of a thickness of 4,75 mm or more | Free | — |
| 7211 19 00 | – – Other | Free | — |
| – Not further worked than cold-rolled (cold-reduced) : | |||
| 7211 23 | – – Containing by weight less than 0,25 % of carbon : | ||
| 7211 23 20 | – – – ‘Electrical’ | Free | — |
| – – – Other: | |||
| 7211 23 30 | – – – – Of a thickness of 0,35 mm or more | Free | — |
| 7211 23 80 | – – – – Of a thickness of less than 0,35 mm | Free | — |
| 7211 29 00 | – – Other | Free | — |
| 7211 90 | – Other : | ||
| 7211 90 20 | – – Perforated | Free | — |
| 7211 90 80 | – – Other | Free | — |
| 7212 | Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, clad, plated or coated : | ||
| 7212 10 | – Plated or coated with tin : | ||
| 7212 10 10 | – – Tinplate, not further worked than surface-treated | Free | — |
| 7212 10 90 | – – Other | Free | — |
| 7212 20 00 | – Electrolytically plated or coated with zinc | Free | — |
| 7212 30 00 | – Otherwise plated or coated with zinc | Free | — |
| 7212 40 | – Painted, varnished or coated with plastics : | ||
| 7212 40 20 | – – Tinplate, not further worked than varnished; products, plated or coated with chromium oxides or with chromium and chromium oxides, varnished | Free | — |
| 7212 40 80 | – – Other | Free | — |
| 7212 50 | – Otherwise plated or coated : | ||
| 7212 50 20 | – – Plated or coated with chromium oxides or with chromium and chromium oxides | Free | — |
| 7212 50 30 | – – Plated or coated with chromium or nickel | Free | — |
| 7212 50 40 | – – Plated or coated with copper | Free | — |
| – – Plated or coated with aluminium: | |||
| 7212 50 61 | – – – Plated or coated with aluminium-zinc alloys | Free | — |
| 7212 50 69 | – – – Other | Free | — |
| 7212 50 90 | – – Other | Free | — |
| 7212 60 00 | – Clad | Free | — |
| 7213 | Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel : | ||
| 7213 10 00 | – Containing indentations, ribs, grooves or other deformations produced during the rolling process | Free | — |
| 7213 20 00 | – Other, of free-cutting steel | Free | — |
| – Other : | |||
| 7213 91 | – – Of circular cross-section measuring less than 14 mm in diameter : | ||
| 7213 91 10 | – – – Of a type used for concrete reinforcement | Free | — |
| 7213 91 20 | – – – Of a type used for tyre cord | Free | — |
| – – – Other: | |||
| 7213 91 41 | – – – – Containing by weight 0,06 % or less of carbon | Free | — |
| 7213 91 49 | – – – – Containing by weight more than 0,06 % but less than 0,25 % of carbon | Free | — |
| 7213 91 70 | – – – – Containing by weight 0,25 % or more but not more than 0,75 % of carbon | Free | — |
| 7213 91 90 | – – – – Containing by weight more than 0,75 % of carbon | Free | — |
| 7213 99 | – – Other : | ||
| 7213 99 10 | – – – Containing by weight less than 0,25 % of carbon | Free | — |
| 7213 99 90 | – – – Containing by weight 0,25 % or more of carbon | Free | — |
| 7214 | Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling : | ||
| 7214 10 00 | – Forged | Free | — |
| 7214 20 00 | – Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling | Free | — |
| 7214 30 00 | – Other, of free-cutting steel | Free | — |
| – Other : | |||
| 7214 91 | – – Of rectangular (other than square) cross-section : | ||
| 7214 91 10 | – – – Containing by weight less than 0,25 % of carbon | Free | — |
| 7214 91 90 | – – – Containing by weight 0,25 % or more of carbon | Free | — |
| 7214 99 | – – Other : | ||
| – – – Containing by weight less than 0,25 % of carbon: | |||
| 7214 99 10 | – – – – Of a type used for concrete reinforcement | Free | — |
| – – – – Other, of circular cross-section measuring in diameter: | |||
| 7214 99 31 | – – – – – 80 mm or more | Free | — |
| 7214 99 39 | – – – – – Less than 80 mm | Free | — |
| 7214 99 50 | – – – – Other | Free | — |
| – – – Containing by weight 0,25 % or more of carbon: | |||
| – – – – Of a circular cross-section measuring in diameter: | |||
| 7214 99 71 | – – – – – 80 mm or more | Free | — |
| 7214 99 79 | – – – – – Less than 80 mm | Free | — |
| 7214 99 95 | – – – – Other | Free | — |
| 7215 | Other bars and rods of iron or non-alloy steel : | ||
| 7215 10 00 | – Of free-cutting steel, not further worked than cold-formed or cold-finished | Free | — |
| 7215 50 | – Other, not further worked than cold-formed or cold-finished : | ||
| – – Containing by weight less than 0,25 % of carbon: | |||
| 7215 50 11 | – – – Of rectangular (other than square) cross-section | Free | — |
| 7215 50 19 | – – – Other | Free | — |
| 7215 50 80 | – – Containing by weight 0,25 % or more of carbon | Free | — |
| 7215 90 00 | – Other | Free | — |
| 7216 | Angles, shapes and sections of iron or non-alloy steel : | ||
| 7216 10 00 | – U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm | Free | — |
| – L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm : | |||
| 7216 21 00 | – – L sections | Free | — |
| 7216 22 00 | – – T sections | Free | — |
| – U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more : | |||
| 7216 31 | – – U sections : | ||
| 7216 31 10 | – – – Of a height of 80 mm or more but not exceeding 220 mm | Free | — |
| 7216 31 90 | – – – Of a height exceeding 220 mm | Free | — |
| 7216 32 | – – I sections : | ||
| – – – Of a height of 80 mm or more but not exceeding 220 mm: | |||
| 7216 32 11 | – – – – With parallel flange faces | Free | — |
| 7216 32 19 | – – – – Other | Free | — |
| – – – Of a height exceeding 220 mm: | |||
| 7216 32 91 | – – – – With parallel flange faces | Free | — |
| 7216 32 99 | – – – – Other | Free | — |
| 7216 33 | – – H sections : | ||
| 7216 33 10 | – – – Of a height of 80 mm or more but not exceeding 180 mm | Free | — |
| 7216 33 90 | – – – Of a height exceeding 180 mm | Free | — |
| 7216 40 | – L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more : | ||
| 7216 40 10 | – – L sections | Free | — |
| 7216 40 90 | – – T sections | Free | — |
| 7216 50 | – Other angles, shapes and sections, not further worked than hot-rolled, hot-drawn or extruded : | ||
| 7216 50 10 | – – With a cross-section which is capable of being enclosed in a square the side of which is 80 mm | Free | — |
| – – Other: | |||
| 7216 50 91 | – – – Bulb flats | Free | — |
| 7216 50 99 | – – – Other | Free | — |
| – Angles, shapes and sections, not further worked than cold-formed or cold-finished : | |||
| 7216 61 | – – Obtained from flat-rolled products : | ||
| 7216 61 10 | – – – C, L, U, Z, omega or open-ended sections | Free | — |
| 7216 61 90 | – – – Other | Free | — |
| 7216 69 00 | – – Other | Free | — |
| – Other : | |||
| 7216 91 | – – Cold-formed or cold-finished from flat-rolled products : | ||
| 7216 91 10 | – – – Profiled (ribbed) sheets | Free | — |
| 7216 91 80 | – – – Other | Free | — |
| 7216 99 00 | – – Other | Free | — |
| 7217 | Wire of iron or non-alloy steel : | ||
| 7217 10 | – Not plated or coated, whether or not polished : | ||
| – – Containing by weight less than 0,25 % of carbon: | |||
| 7217 10 10 | – – – With a maximum cross-sectional dimension of less than 0,8 mm | Free | — |
| – – – With a maximum cross-sectional dimension of 0,8 mm or more: | |||
| 7217 10 31 | – – – – Containing indentations, ribs, grooves or other deformations produced during the rolling process | Free | — |
| 7217 10 39 | – – – – Other | Free | — |
| 7217 10 50 | – – Containing by weight 0,25 % or more but less than 0,6 % of carbon | Free | — |
| 7217 10 90 | – – Containing by weight 0,6 % or more of carbon | Free | — |
| 7217 20 | – Plated or coated with zinc : | ||
| – – Containing by weight less than 0,25 % of carbon: | |||
| 7217 20 10 | – – – With a maximum cross-sectional dimension of less than 0,8 mm | Free | — |
| 7217 20 30 | – – – With a maximum cross-sectional dimension of 0,8 mm or more | Free | — |
| 7217 20 50 | – – Containing by weight 0,25 % or more but less than 0,6 % of carbon | Free | — |
| 7217 20 90 | – – Containing by weight 0,6 % or more of carbon | Free | — |
| 7217 30 | – Plated or coated with other base metals : | ||
| – – Containing by weight less than 0,25 % of carbon: | |||
| 7217 30 41 | – – – Copper-coated | Free | — |
| 7217 30 49 | – – – Other | Free | — |
| 7217 30 50 | – – Containing by weight 0,25 % or more but less than 0,6 % of carbon | Free | — |
| 7217 30 90 | – – Containing by weight 0,6 % or more of carbon | Free | — |
| 7217 90 | – Other : | ||
| 7217 90 20 | – – Containing by weight less than 0,25 % of carbon | Free | — |
| 7217 90 50 | – – Containing by weight 0,25 % or more but less than 0,6 % of carbon | Free | — |
| 7217 90 90 | – – Containing by weight 0,6 % or more of carbon | Free | — |
| III. STAINLESS STEEL | |||
| 7218 | Stainless steel in ingots or other primary forms; semi-finished products of stainless steel : | ||
| 7218 10 00 | – Ingots and other primary forms | Free | — |
| – Other : | |||
| 7218 91 | – – Of rectangular (other than square) cross-section : | ||
| 7218 91 10 | – – – Containing by weight 2,5 % or more of nickel | Free | — |
| 7218 91 80 | – – – Containing by weight less than 2,5 % of nickel | Free | — |
| 7218 99 | – – Other : | ||
| – – – Of square cross-section: | |||
| 7218 99 11 | – – – – Rolled or obtained by continous casting | Free | — |
| 7218 99 19 | – – – – Forged | Free | — |
| – – – Other: | |||
| 7218 99 20 | – – – – Rolled or obtained by continuous casting | Free | — |
| 7218 99 80 | – – – – Forged | Free | — |
| 7219 | Flat-rolled products of stainless steel, of a width of 600 mm or more : | ||
| – Not further worked than hot-rolled, in coils : | |||
| 7219 11 00 | – – Of a thickness exceeding 10 mm | Free | — |
| 7219 12 | – – Of a thickness of 4,75 mm or more but not exceeding 10 mm : | ||
| 7219 12 10 | – – – Containing by weight 2,5 % or more of nickel | Free | — |
| 7219 12 90 | – – – Containing by weight less than 2,5 % of nickel | Free | — |
| 7219 13 | – – Of a thickness of 3 mm or more but less than 4,75 mm : | ||
| 7219 13 10 | – – – Containing by weight 2,5 % or more of nickel | Free | — |
| 7219 13 90 | – – – Containing by weight less than 2,5 % of nickel | Free | — |
| 7219 14 | – – Of a thickness of less than 3 mm : | ||
| 7219 14 10 | – – – Containing by weight 2,5 % or more of nickel | Free | — |
| 7219 14 90 | – – – Containing by weight less than 2,5 % of nickel | Free | — |
| – Not further worked than hot-rolled, not in coils : | |||
| 7219 21 | – – Of a thickness exceeding 10 mm : | ||
| 7219 21 10 | – – – Containing by weight 2,5 % or more of nickel | Free | — |
| 7219 21 90 | – – – Containing by weight less than 2,5 % of nickel | Free | — |
| 7219 22 | – – Of a thickness of 4,75 mm or more but not exceeding 10 mm : | ||
| 7219 22 10 | – – – Containing by weight 2,5 % or more of nickel | Free | — |
| 7219 22 90 | – – – Containing by weight less than 2,5 % of nickel | Free | — |
| 7219 23 00 | – – Of a thickness of 3 mm or more but less than 4,75 mm | Free | — |
| 7219 24 00 | – – Of a thickness of less than 3 mm | Free | — |
| – Not further worked than cold-rolled (cold-reduced) : | |||
| 7219 31 00 | – – Of a thickness of 4,75 mm or more | Free | — |
| 7219 32 | – – Of a thickness of 3 mm or more but less than 4,75 mm : | ||
| 7219 32 10 | – – – Containing by weight 2,5 % or more of nickel | Free | — |
| 7219 32 90 | – – – Containing by weight less than 2,5 % of nickel | Free | — |
| 7219 33 | – – Of a thickness exceeding 1 mm but less than 3 mm : | ||
| 7219 33 10 | – – – Containing by weight 2,5 % or more of nickel | Free | — |
| 7219 33 90 | – – – Containing by weight less than 2,5 % of nickel | Free | — |
| 7219 34 | – – Of a thickness of 0,5 mm or more but not exceeding 1 mm : | ||
| 7219 34 10 | – – – Containing by weight 2,5 % or more of nickel | Free | — |
| 7219 34 90 | – – – Containing by weight less than 2,5 % of nickel | Free | — |
| 7219 35 | – – Of a thickness of less than 0,5 mm : | ||
| 7219 35 10 | – – – Containing by weight 2,5 % or more of nickel | Free | — |
| 7219 35 90 | – – – Containing by weight less than 2,5 % of nickel | Free | — |
| 7219 90 | – Other : | ||
| 7219 90 20 | – – Perforated | Free | — |
| 7219 90 80 | – – Other | Free | — |
| 7220 | Flat-rolled products of stainless steel, of a width of less than 600 mm : | ||
| – Not further worked than hot-rolled : | |||
| 7220 11 00 | – – Of a thickness of 4,75 mm or more | Free | — |
| 7220 12 00 | – – Of a thickness of less than 4,75 mm | Free | — |
| 7220 20 | – Not further worked than cold-rolled (cold-reduced) : | ||
| – – Of a thickness of 3 mm or more, containing by weight: | |||
| 7220 20 21 | – – – 2,5 % or more of nickel | Free | — |
| 7220 20 29 | – – – Less than 2,5 % of nickel | Free | — |
| – – Of a thickness exceeding 0,35 mm but of less than 3 mm, containing by weight: | |||
| 7220 20 41 | – – – 2,5 % or more of nickel | Free | — |
| 7220 20 49 | – – – Less than 2,5 % of nickel | Free | — |
| – – Of a thickness not exceeding 0,35 mm, containing by weight: | |||
| 7220 20 81 | – – – 2,5 % or more of nickel | Free | — |
| 7220 20 89 | – – – Less than 2,5 % of nickel | Free | — |
| 7220 90 | – Other : | ||
| 7220 90 20 | – – Perforated | Free | — |
| 7220 90 80 | – – Other | Free | — |
| 7221 00 | Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel : | ||
| 7221 00 10 | – Containing by weight 2,5 % or more of nickel | Free | — |
| 7221 00 90 | – Containing by weight less than 2,5 % of nickel | Free | — |
| 7222 | Other bars and rods of stainless steel; angles, shapes and sections of stainless steel : | ||
| – Bars and rods, not further worked than hot-rolled, hot-drawn or extruded : | |||
| 7222 11 | – – Of circular cross-section : | ||
| – – – Of a diameter of 80 mm or more, containing by weight: | |||
| 7222 11 11 | – – – – 2,5 % or more of nickel | Free | — |
| 7222 11 19 | – – – – Less than 2,5 % of nickel | Free | — |
| – – – Of a diameter of less than 80 mm, containing by weight: | |||
| 7222 11 81 | – – – – 2,5 % or more of nickel | Free | — |
| 7222 11 89 | – – – – Less than 2,5 % of nickel | Free | — |
| 7222 19 | – – Other : | ||
| 7222 19 10 | – – – Containing by weight 2,5 % or more of nickel | Free | — |
| 7222 19 90 | – – – Containing by weight less than 2,5 % of nickel | Free | — |
| 7222 20 | – Bars and rods, not further worked than cold-formed or cold-finished : | ||
| – – Of circular cross-section: | |||
| – – – Of a diameter of 80 mm or more, containing by weight: | |||
| 7222 20 11 | – – – – 2,5 % or more of nickel | Free | — |
| 7222 20 19 | – – – – Less than 2,5 % of nickel | Free | — |
| – – – Of a diameter of 25 mm or more, but less than 80 mm, containing by weight: | |||
| 7222 20 21 | – – – – 2,5 % or more of nickel | Free | — |
| 7222 20 29 | – – – – Less than 2,5 % of nickel | Free | — |
| – – – Of a diameter of less than 25 mm, containing by weight: | |||
| 7222 20 31 | – – – – 2,5 % or more of nickel | Free | — |
| 7222 20 39 | – – – – Less than 2,5 % of nickel | Free | — |
| – – Other, containing by weight: | |||
| 7222 20 81 | – – – 2,5 % or more of nickel | Free | — |
| 7222 20 89 | – – – Less than 2,5 % of nickel | Free | — |
| 7222 30 | – Other bars and rods : | ||
| – – Forged, containing by weight: | |||
| 7222 30 51 | – – – 2,5 % or more of nickel | Free | — |
| 7222 30 91 | – – – Less than 2,5 % of nickel | Free | — |
| 7222 30 97 | – – Other | Free | — |
| 7222 40 | – Angles, shapes and sections : | ||
| 7222 40 10 | – – Not further worked than hot-rolled, hot-drawn or extruded | Free | — |
| 7222 40 50 | – – Not further worked than cold-formed or cold-finished | Free | — |
| 7222 40 90 | – – Other | Free | — |
| 7223 00 | Wire of stainless steel : | ||
| – Containing by weight 2,5 % or more of nickel: | |||
| 7223 00 11 | – – Containing by weight 28 % or more but not more than 31 % of nickel and 20 % or more but not more than 22 % of chromium | Free | — |
| 7223 00 19 | – – Other | Free | — |
| – Containing by weight less than 2,5 % of nickel: | |||
| 7223 00 91 | – – Containing by weight 13 % or more but not more than 25 % of chromium and 3,5 % or more but not more than 6 % of aluminium | Free | — |
| 7223 00 99 | – – Other | Free | — |
| IV. OTHER ALLOY STEEL; HOLLOW DRILL BARS AND RODS, OF ALLOY OR NON-ALLOY STEEL | |||
| 7224 | Other alloy steel in ingots or other primary forms; semi-finished products of other alloy steel : | ||
| 7224 10 | – Ingots and other primary forms : | ||
| 7224 10 10 | – – Of tool steel | Free | — |
| 7224 10 90 | – – Other | Free | — |
| 7224 90 | – Other : | ||
| 7224 90 02 | – – Of tool steel | Free | — |
| – – Other: | |||
| – – – Of rectangular (including square) cross-section: | |||
| – – – – Hot-rolled or obtained by continuous casting: | |||
| – – – – – The width measuring less than twice the thickness: | |||
| 7224 90 03 | – – – – – – Of high-speed steel | Free | — |
| 7224 90 05 | – – – – – – Containing by weight not more than 0,7 % of carbon, 0,5 % or more but not more than 1,2 % of manganese and 0,6 % or more but not more than 2,3 % of silicon; containing by weight 0,0008 % or more of boron with any other element less than the minimum content referred to in note 1(f) to this chapter | Free | — |
| 7224 90 07 | – – – – – – Other | Free | — |
| 7224 90 14 | – – – – – Other | Free | — |
| 7224 90 18 | – – – – Forged | Free | — |
| – – – Other: | |||
| – – – – Hot-rolled or obtained by continuous casting: | |||
| 7224 90 31 | – – – – – Containing by weight not less than 0,9 % but not more than 1,15 % of carbon, not less than 0,5 % but not more than 2 % of chromium and, if present, not more than 0,5 % of molybdenum | Free | — |
| 7224 90 38 | – – – – – Other | Free | — |
| 7224 90 90 | – – – – Forged | Free | — |
| 7225 | Flat-rolled products of other alloy steel, of a width of 600 mm or more : | ||
| – Of silicon-electrical steel : | |||
| 7225 11 00 | – – Grain-oriented | Free | — |
| 7225 19 | – – Other : | ||
| 7225 19 10 | – – – Hot-rolled | Free | — |
| 7225 19 90 | – – – Cold-rolled | Free | — |
| 7225 30 | – Other, not further worked than hot-rolled, in coils : | ||
| 7225 30 10 | – – Of tool steel | Free | — |
| 7225 30 30 | – – Of high-speed steel | Free | — |
| 7225 30 90 | – – Other | Free | — |
| 7225 40 | – Other, not further worked than hot-rolled, not in coils : | ||
| 7225 40 12 | – – Of tool steel | Free | — |
| 7225 40 15 | – – Of high-speed steel | Free | — |
| – – Other: | |||
| 7225 40 40 | – – – Of a thickness exceeding 10 mm | Free | — |
| 7225 40 60 | – – – Of a thickness of 4,75 mm or more but not exceeding 10 mm | Free | — |
| 7225 40 90 | – – – Of a thickness of less than 4,75 mm | Free | — |
| 7225 50 | – Other, not further worked than cold-rolled (cold-reduced) : | ||
| 7225 50 20 | – – Of high-speed steel | Free | — |
| 7225 50 80 | – – Other | Free | — |
| – Other : | |||
| 7225 91 00 | – – Electrolytically plated or coated with zinc | Free | — |
| 7225 92 00 | – – Otherwise plated or coated with zinc | Free | — |
| 7225 99 00 | – – Other | Free | — |
| 7226 | Flat-rolled products of other alloy steel, of a width of less than 600 mm : | ||
| – Of silicon-electrical steel : | |||
| 7226 11 00 | – – Grain-oriented | Free | — |
| 7226 19 | – – Other : | ||
| 7226 19 10 | – – – Not further worked than hot-rolled | Free | — |
| 7226 19 80 | – – – Other | Free | — |
| 7226 20 00 | – Of high-speed steel | Free | — |
| – Other : | |||
| 7226 91 | – – Not further worked than hot-rolled : | ||
| 7226 91 20 | – – – Of tool steel | Free | — |
| – – – Other: | |||
| 7226 91 91 | – – – – Of a thickness of 4,75 mm or more | Free | — |
| 7226 91 99 | – – – – Of a thickness of less than 4,75 mm | Free | — |
| 7226 92 00 | – – Not further worked than cold-rolled (cold-reduced) | Free | — |
| 7226 99 | – – Other : | ||
| 7226 99 10 | – – – Electrolytically plated or coated with zinc | Free | — |
| 7226 99 30 | – – – Otherwise plated or coated with zinc | Free | — |
| 7226 99 70 | – – – Other | Free | — |
| 7227 | Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel : | ||
| 7227 10 00 | – Of high-speed steel | Free | — |
| 7227 20 00 | – Of silico-manganese steel | Free | — |
| 7227 90 | – Other : | ||
| 7227 90 10 | – – Containing by weight 0,0008 % or more of boron with any other element less than the minimum content referred to in note 1(f) to this chapter | Free | — |
| 7227 90 50 | – – Containing by weight 0,9 % or more but not more than 1,15 % of carbon, 0,5 % or more but not more than 2 % of chromium and, if present, not more than 0,5 % of molybdenum | Free | — |
| 7227 90 95 | – – Other | Free | — |
| 7228 | Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel : | ||
| 7228 10 | – Bars and rods, of high-speed steel : | ||
| 7228 10 20 | – – Not further worked than hot-rolled, hot-drawn or extruded; hot-rolled, hot-drawn or extruded, not further worked than clad | Free | — |
| 7228 10 50 | – – Forged | Free | — |
| 7228 10 90 | – – Other | Free | — |
| 7228 20 | – Bars and rods, of silico-manganese steel : | ||
| 7228 20 10 | – – Of rectangular (other than square) cross-section, hot-rolled on four faces | Free | — |
| – – Other: | |||
| 7228 20 91 | – – – Not further worked than hot-rolled, hot-drawn or extruded; hot-rolled, hot-drawn or extruded, not further worked than clad | Free | — |
| 7228 20 99 | – – – Other | Free | — |
| 7228 30 | – Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded : | ||
| 7228 30 20 | – – Of tool steel | Free | — |
| – – Containing by weight 0,9 % or more but not more than 1,15 % of carbon, 0,5 % or more but not more than 2 % of chromium and, if present, not more than 0,5 % of molybdenum: | |||
| 7228 30 41 | – – – Of circular cross-section of a diameter of 80 mm or more | Free | — |
| 7228 30 49 | – – – Other | Free | — |
| – – Other: | |||
| – – – Of circular cross-section, of a diameter of: | |||
| 7228 30 61 | – – – – 80 mm or more | Free | — |
| 7228 30 69 | – – – – Less than 80 mm | Free | — |
| 7228 30 70 | – – – Of rectangular (other than square) cross-section, hot-rolled on four faces | Free | — |
| 7228 30 89 | – – – Other | Free | — |
| 7228 40 | – Other bars and rods, not further worked than forged : | ||
| 7228 40 10 | – – Of tool steel | Free | — |
| 7228 40 90 | – – Other | Free | — |
| 7228 50 | – Other bars and rods, not further worked than cold-formed or cold-finished : | ||
| 7228 50 20 | – – Of tool steel | Free | — |
| 7228 50 40 | – – Containing by weight 0,9 % or more but not more than 1,15 % of carbon, 0,5 % or more but not more than 2 % of chromium and, if present, not more than 0,5 % of molybdenum | Free | — |
| – – Other: | |||
| – – – Of circular cross-section, of a diameter of: | |||
| 7228 50 61 | – – – – 80 mm or more | Free | — |
| 7228 50 69 | – – – – Less than 80 mm | Free | — |
| 7228 50 80 | – – – Other | Free | — |
| 7228 60 | – Other bars and rods : | ||
| 7228 60 20 | – – Of tool steel | Free | — |
| 7228 60 80 | – – Other | Free | — |
| 7228 70 | – Angles, shapes and sections : | ||
| 7228 70 10 | – – Not further worked than hot-rolled, hot-drawn or extruded | Free | — |
| 7228 70 90 | – – Other | Free | — |
| 7228 80 00 | – Hollow drill bars and rods | Free | — |
| 7229 | Wire of other alloy steel : | ||
| 7229 20 00 | – Of silico-manganese steel | Free | — |
| 7229 90 | – Other : | ||
| 7229 90 20 | – – Of high-speed steel | Free | — |
| 7229 90 50 | – – Containing by weight 0,9 % or more but not more than 1,15 % of carbon, 0,5 % or more but not more than 2 % of chromium and, if present, not more than 0,5 % of molybdenum | Free | — |
| 7229 90 90 | – – Other | Free | — |
| (1) WTO tariff quota. |
1.In this chapter, the expression ‘cast iron’ applies to products obtained by casting in which iron predominates by weight over each of the other elements and which do not comply with the chemical composition of steel as defined in note 1(d) to Chapter 72.
2.In this chapter, the word ‘wire’ means hot- or cold-formed products of any cross-sectional shape, of which no cross-sectional dimension exceeds 16 mm.
Reading this document does not replace reading the official text published in the Official Journal of the European Union. We assume no responsibility for any inaccuracies arising from the conversion of the original to this format.
This text is published under EUR-Lex's own terms of reuse, not a Legalize or public-domain licence.
EUR-Lex
Creative Commons Attribution 4.0 International (CC BY 4.0)
© European Union, https://eur-lex.europa.eu — Source: EUR-Lex (Publications Office of the European Union). Reused under the Creative Commons Attribution 4.0 International (CC BY 4.0) licence. Only EU legislation published in the printed Official Journal of the European Union is deemed authentic; consolidated texts are reproduced here for documentation purposes and have been reformatted to Markdown.