LegalizeCommission Implementing Regulation (EU) 2021/1832 of 12 October 2021 amending Annex I to Council Regulation (EEC) No 2658/87 on the tariff and statistical nomenclature and on the Common Customs Tariff
This is the act as published. Later amendments are not folded into the text below: each one is a separate act in this repository and an entry in this law's history.
| 8442 30 00 | – Machinery, apparatus and equipment | Free | p/st |
| 8442 40 00 | – Parts of the foregoing machinery, apparatus or equipment | Free | — |
| 8442 50 00 | – Plates, cylinders and other printing components; plates, cylinders and lithographic stones, prepared for printing purposes (for example, planed, grained or polished) | Free | — |
| 8443 | Printing machinery used for printing by means of plates, cylinders and other printing components of heading 8442; other printers, copying machines and facsimile machines, whether or not combined; parts and accessories thereof | ||
| – Printing machinery used for printing by means of plates, cylinders and other printing components of heading 8442 | |||
| 8443 11 00 | – – Offset printing machinery, reel fed | 1,7 | p/st |
| 8443 12 00 | – – Offset printing machinery, sheet fed, office type (using sheets with one side not exceeding 22 cm and the other side not exceeding 36 cm in the unfolded state) | 1,7 | p/st |
| 8443 13 | – – Other offset printing machinery | ||
| – – – Sheet fed | |||
| 8443 13 10 | – – – – Used | 1,7 | p/st |
| – – – – New, taking sheets of a size | |||
| 8443 13 32 | – – – – – Not exceeding 53 × 75 cm | 1,7 | p/st |
| 8443 13 34 | – – – – – Exceeding 53 × 75 cm but not exceeding 75 × 107 cm | 1,7 | p/st |
| 8443 13 38 | – – – – – Exceeding 75 × 107 cm | 1,7 | p/st |
| 8443 13 90 | – – – Other | 1,7 | p/st |
| 8443 14 00 | – – Letterpress printing machinery, reel fed, excluding flexographic printing | 1,7 | p/st |
| 8443 15 00 | – – Letterpress printing machinery, other than reel fed, excluding flexographic printing | 1,7 | p/st |
| 8443 16 00 | – – Flexographic printing machinery | 1,7 | p/st |
| 8443 17 00 | – – Gravure printing machinery | 1,7 | p/st |
| 8443 19 | – – Other | ||
| 8443 19 20 | – – – For printing textile materials | 1,7 | p/st |
| 8443 19 40 | – – – For use in the production of semiconductors 4 | 1,7 6 | p/st |
| 8443 19 70 | – – – Other | 1,7 | p/st |
| – Other printers, copying machines and facsimile machines, whether or not combined | |||
| 8443 31 00 | – – Machines which perform two or more of the functions of printing, copying or facsimile transmission, capable of connecting to an automatic data-processing machine or to a network | Free | p/st |
| 8443 32 | – – Other, capable of connecting to an automatic data-processing machine or to a network | ||
| 8443 32 10 | – – – Printers | Free | p/st |
| 8443 32 80 | – – – Other | Free | p/st |
| 8443 39 00 | – – Other | Free | p/st |
| – Parts and accessories | |||
| 8443 91 | – – Parts and accessories of printing machinery used for printing by means of plates, cylinders and other printing components of heading 8442 | ||
| 8443 91 10 | – – – Of apparatus of subheading 8443 19 40 | Free | — |
| – – – Other | |||
| 8443 91 91 | – – – – Of cast iron or cast steel | Free | — |
| 8443 91 99 | – – – – Other | Free | — |
| 8443 99 | – – Other | ||
| 8443 99 10 | – – – Electronic assemblies | Free | — |
| 8443 99 90 | – – – Other | Free | — |
| 8444 00 | Machines for extruding, drawing, texturing or cutting man-made textile materials | ||
| 8444 00 10 | – Machines for extruding | 1,7 | p/st |
| 8444 00 90 | – Other | 1,7 | p/st |
| 8445 | Machines for preparing textile fibres; spinning, doubling or twisting machines and other machinery for producing textile yarns; textile reeling or winding (including weft-winding) machines and machines for preparing textile yarns for use on the machines of heading 8446 or 8447 | ||
| – Machines for preparing textile fibres | |||
| 8445 11 00 | – – Carding machines | 1,7 | p/st |
| 8445 12 00 | – – Combing machines | 1,7 | p/st |
| 8445 13 00 | – – Drawing or roving machines | 1,7 | p/st |
| 8445 19 00 | – – Other | 1,7 | p/st |
| 8445 20 00 | – Textile spinning machines | 1,7 | p/st |
| 8445 30 00 | – Textile doubling or twisting machines | 1,7 | p/st |
| 8445 40 00 | – Textile winding (including weft-winding) or reeling machines | 1,7 | p/st |
| 8445 90 00 | – Other | 1,7 | p/st |
| 8446 | Weaving machines (looms) | ||
| 8446 10 00 | – For weaving fabrics of a width not exceeding 30 cm | 1,7 | p/st |
| – For weaving fabrics of a width exceeding 30 cm, shuttle type | |||
| 8446 21 00 | – – Power looms | 1,7 | p/st |
| 8446 29 00 | – – Other | 1,7 | p/st |
| 8446 30 00 | – For weaving fabrics of a width exceeding 30 cm, shuttleless type | 1,7 | p/st |
| 8447 | Knitting machines, stitch-bonding machines and machines for making gimped yarn, tulle, lace, embroidery, trimmings, braid or net and machines for tufting | ||
| – Circular knitting machines | |||
| 8447 11 00 | – – With cylinder diameter not exceeding 165 mm | 1,7 | p/st |
| 8447 12 00 | – – With cylinder diameter exceeding 165 mm | 1,7 | p/st |
| 8447 20 | – Flat knitting machines; stitch-bonding machines | ||
| 8447 20 20 | – – Warp knitting machines (including Raschel type); stitch-bonding machines | 1,7 | p/st |
| 8447 20 80 | – – Other | 1,7 | p/st |
| 8447 90 00 | – Other | 1,7 | p/st |
| 8448 | Auxiliary machinery for use with machines of heading 8444, 8445, 8446 or 8447 (for example, dobbies, jacquards, automatic stop motions, shuttle changing mechanisms); parts and accessories suitable for use solely or principally with the machines of this heading or of heading 8444, 8445, 8446 or 8447 (for example, spindles and spindle flyers, card clothing, combs, extruding nipples, shuttles, healds and heald-frames, hosiery needles) | ||
| – Auxiliary machinery for machines of heading 8444, 8445, 8446 or 8447 | |||
| 8448 11 00 | – – Dobbies and jacquards; card-reducing, copying, punching or assembling machines for use therewith | 1,7 | — |
| 8448 19 00 | – – Other | 1,7 | — |
| 8448 20 00 | – Parts and accessories of machines of heading 8444 or of their auxiliary machinery | 1,7 | — |
| – Parts and accessories of machines of heading 8445 or of their auxiliary machinery | |||
| 8448 31 00 | – – Card clothing | 1,7 | — |
| 8448 32 00 | – – Of machines for preparing textile fibres, other than card clothing | 1,7 | — |
| 8448 33 00 | – – Spindles, spindle flyers, spinning rings and ring travellers | 1,7 | — |
| 8448 39 00 | – – Other | 1,7 | — |
| – Parts and accessories of weaving machines (looms) or of their auxiliary machinery | |||
| 8448 42 00 | – – Reeds for looms, healds and heald-frames | 1,7 | — |
| 8448 49 00 | – – Other | 1,7 | — |
| – Parts and accessories of machines of heading 8447 or of their auxiliary machinery | |||
| 8448 51 | – – Sinkers, needles and other articles used in forming stitches | ||
| 8448 51 10 | – – – Sinkers | 1,7 | — |
| 8448 51 90 | – – – Other | 1,7 | — |
| 8448 59 00 | – – Other | 1,7 | — |
| 8449 00 00 | Machinery for the manufacture or finishing of felt or nonwovens in the piece or in shapes, including machinery for making felt hats; blocks for making hats | 1,7 | — |
| 8450 | Household or laundry-type washing machines, including machines which both wash and dry | ||
| – Machines, each of a dry linen capacity not exceeding 10 kg | |||
| 8450 11 | – – Fully-automatic machines | ||
| – – – Each of a dry linen capacity not exceeding 6 kg | |||
| 8450 11 11 | – – – – Front-loading machines | 3 | p/st |
| 8450 11 19 | – – – – Top-loading machines | 3 | p/st |
| 8450 11 90 | – – – Each of a dry linen capacity exceeding 6 kg but not exceeding 10 kg | 2,6 | p/st |
| 8450 12 00 | – – Other machines, with built-in centrifugal drier | 2,7 | p/st |
| 8450 19 00 | – – Other | 2,7 | p/st |
| 8450 20 00 | – Machines, each of a dry linen capacity exceeding 10 kg | 2,2 | p/st |
| 8450 90 00 | – Parts | 2,7 | — |
| 8451 | Machinery (other than machines of heading 8450) for washing, cleaning, wringing, drying, ironing, pressing (including fusing presses), bleaching, dyeing, dressing, finishing, coating or impregnating textile yarns, fabrics or made-up textile articles and machines for applying the paste to the base fabric or other support used in the manufacture of floor coverings such as linoleum; machines for reeling, unreeling, folding, cutting or pinking textile fabrics | ||
| 8451 10 00 | – Dry-cleaning machines | 2,2 | — |
| – Drying machines | |||
| 8451 21 00 | – – Each of a dry linen capacity not exceeding 10 kg | 2,2 | — |
| 8451 29 00 | – – Other | 2,2 | — |
| 8451 30 00 | – Ironing machines and presses (including fusing presses) | 2,2 | p/st |
| 8451 40 00 | – Washing, bleaching or dyeing machines | 2,2 | — |
| 8451 50 00 | – Machines for reeling, unreeling, folding, cutting or pinking textile fabrics | 2,2 | — |
| 8451 80 | – Other machinery | ||
| 8451 80 10 | – – Machines used in the manufacture of linoleum or other floor coverings for applying the paste to the base fabric or other support | 2,2 | — |
| 8451 80 30 | – – Machines for dressing or finishing | 2,2 | — |
| 8451 80 80 | – – Other | 2,2 | — |
| 8451 90 00 | – Parts | 2,2 | — |
| 8452 | Sewing machines, other than book-sewing machines of heading 8440; furniture, bases and covers specially designed for sewing machines; sewing machine needles | ||
| 8452 10 | – Sewing machines of the household type | ||
| – – Sewing machines (lock-stitch only), with heads of a weight not exceeding 16 kg without motor or 17 kg including the motor; sewing machine heads (lock-stitch only), of a weight not exceeding 16 kg without motor or 17 kg including the motor | |||
| 8452 10 11 | – – – Sewing machines having a value (not including frames, tables or furniture) of more than € 65 each | 5,7 | p/st |
| 8452 10 19 | – – – Other | 9,7 | p/st |
| 8452 10 90 | – – Other sewing machines and other sewing machine heads | 3,7 | p/st |
| – Other sewing machines | |||
| 8452 21 00 | – – Automatic units | 3,7 | p/st |
| 8452 29 00 | – – Other | 3,7 | p/st |
| 8452 30 00 | – Sewing machine needles | 2,7 | 1 000 p/st |
| 8452 90 00 | – Furniture, bases and covers for sewing machines and parts thereof; other parts of sewing machines | 2,7 | — |
| 8453 | Machinery for preparing, tanning or working hides, skins or leather or for making or repairing footwear or other articles of hides, skins or leather, other than sewing machines | ||
| 8453 10 00 | – Machinery for preparing, tanning or working hides, skins or leather | 1,7 | — |
| 8453 20 00 | – Machinery for making or repairing footwear | 1,7 | — |
| 8453 80 00 | – Other machinery | 1,7 | — |
| 8453 90 00 | – Parts | 1,7 | — |
| 8454 | Converters, ladles, ingot moulds and casting machines, of a kind used in metallurgy or in metal foundries | ||
| 8454 10 00 | – Converters | 1,7 | — |
| 8454 20 00 | – Ingot moulds and ladles | 1,7 | — |
| 8454 30 | – Casting machines | ||
| 8454 30 10 | – – For casting under pressure | 1,7 | — |
| 8454 30 90 | – – Other | 1,7 | — |
| 8454 90 00 | – Parts | 1,7 | — |
| 8455 | Metal-rolling mills and rolls therefor | ||
| 8455 10 00 | – Tube mills | 2,7 | — |
| – Other rolling mills | |||
| 8455 21 00 | – – Hot or combination hot and cold | 2,7 | — |
| 8455 22 00 | – – Cold | 2,7 | — |
| 8455 30 | – Rolls for rolling mills | ||
| 8455 30 10 | – – Of cast iron | 2,7 | — |
| – – Of open-die forged steel | |||
| 8455 30 31 | – – – Hot-rolling work-rolls; hot-rolling and cold-rolling back-up rolls | 2,7 | — |
| 8455 30 39 | – – – Cold-rolling work-rolls | 2,7 | — |
| 8455 30 90 | – – Other | 2,7 | — |
| 8455 90 00 | – Other parts | 2,7 | — |
| 8456 | Machine tools for working any material by removal of material, by laser or other light or photon beam, ultrasonic, electrodischarge, electrochemical, electron beam, ionic-beam or plasma arc processes; water-jet cutting machines | ||
| – Operated by laser or other light or photon beam processes | |||
| 8456 11 | – – Operated by laser | ||
| 8456 11 10 | – – – Of a kind used solely or principally for the manufacture of printed circuits, printed circuit assemblies, parts of heading 8517, or parts of automatic data processing machines | Free | p/st |
| 8456 11 90 | – – – Other | 4,5 | p/st |
| 8456 12 | – – Operated by other light or photon beam processes | ||
| 8456 12 10 | – – – Of a kind used solely or principally for the manufacture of printed circuits, printed circuit assemblies, parts of heading 8517, or parts of automatic data processing machines | Free | p/st |
| 8456 12 90 | – – – Other | 4,5 | p/st |
| 8456 20 00 | – Operated by ultrasonic processes | 3,5 | p/st |
| 8456 30 | – Operated by electrodischarge processes | ||
| – – Numerically controlled | |||
| 8456 30 11 | – – – Wire-cut | 3,5 | p/st |
| 8456 30 19 | – – – Other | 3,5 | p/st |
| 8456 30 90 | – – Other | 3,5 | p/st |
| 8456 40 00 | – Operated by plasma arc processes | 3,5 | p/st |
| 8456 50 00 | – Water-jet cutting machines | 1,7 | p/st |
| 8456 90 00 | – Other | 3,5 | p/st |
| 8457 | Machining centres, unit construction machines (single station) and multi-station transfer machines, for working metal | ||
| 8457 10 | – Machining centres | ||
| 8457 10 10 | – – Horizontal | 2,7 | p/st |
| 8457 10 90 | – – Other | 2,7 | p/st |
| 8457 20 00 | – Unit construction machines (single station) | 2,7 | p/st |
| 8457 30 | – Multi-station transfer machines | ||
| 8457 30 10 | – – Numerically controlled | 2,7 | p/st |
| 8457 30 90 | – – Other | 2,7 | p/st |
| 8458 | Lathes (including turning centres) for removing metal | ||
| – Horizontal lathes | |||
| 8458 11 | – – Numerically controlled | ||
| 8458 11 20 | – – – Turning centres | 2,7 | p/st |
| – – – Automatic lathes | |||
| 8458 11 41 | – – – – Single spindle | 2,7 | p/st |
| 8458 11 49 | – – – – Multi-spindle | 2,7 | p/st |
| 8458 11 80 | – – – Other | 2,7 | p/st |
| 8458 19 00 | – – Other | 2,7 | p/st |
| – Other lathes | |||
| 8458 91 | – – Numerically controlled | ||
| 8458 91 20 | – – – Turning centres | 2,7 | p/st |
| 8458 91 80 | – – – Other | 2,7 | p/st |
| 8458 99 00 | – – Other | 2,7 | p/st |
| 8459 | Machine tools (including way-type unit head machines) for drilling, boring, milling, threading or tapping by removing metal, other than lathes (including turning centres) of heading 8458 | ||
| 8459 10 00 | – Way-type unit head machines | 2,7 | p/st |
| – Other drilling machines | |||
| 8459 21 00 | – – Numerically controlled | 2,7 | p/st |
| 8459 29 00 | – – Other | 2,7 | p/st |
| – Other boring-milling machines | |||
| 8459 31 00 | – – Numerically controlled | 1,7 | p/st |
| 8459 39 00 | – – Other | 1,7 | p/st |
| – Other boring machines | |||
| 8459 41 00 | – – Numerically controlled | 1,7 | p/st |
| 8459 49 00 | – – Other | 1,7 | p/st |
| – Milling machines, knee-type | |||
| 8459 51 00 | – – Numerically controlled | 2,7 | p/st |
| 8459 59 00 | – – Other | 2,7 | p/st |
| – Other milling machines | |||
| 8459 61 | – – Numerically controlled | ||
| 8459 61 10 | – – – Tool milling machines | 2,7 | p/st |
| 8459 61 90 | – – – Other | 2,7 | p/st |
| 8459 69 | – – Other | ||
| 8459 69 10 | – – – Tool milling machines | 2,7 | p/st |
| 8459 69 90 | – – – Other | 2,7 | p/st |
| 8459 70 00 | – Other threading or tapping machines | 2,7 | p/st |
| 8460 | Machine tools for deburring, sharpening, grinding, honing, lapping, polishing or otherwise finishing metal or cermets by means of grinding stones, abrasives or polishing products, other than gear cutting, gear grinding or gear finishing machines of heading 8461 | ||
| – Flat-surface grinding machines | |||
| 8460 12 00 | – – Numerically controlled | 1,7 | p/st |
| 8460 19 00 | – – Other | 1,7 | p/st |
| – Other grinding machines | |||
| 8460 22 00 | – – Centreless grinding machines, numerically controlled | 1,7 | p/st |
| 8460 23 00 | – – Other cylindrical grinding machines, numerically controlled | 1,7 | p/st |
| 8460 24 00 | – – Other, numerically controlled | 1,7 | p/st |
| 8460 29 | – – Other | ||
| 8460 29 10 | – – – For cylindrical surfaces | 2,7 | p/st |
| 8460 29 90 | – – – Other | 2,7 | p/st |
| – Sharpening (tool or cutter grinding) machines | |||
| 8460 31 00 | – – Numerically controlled | 1,7 | p/st |
| 8460 39 00 | – – Other | 1,7 | p/st |
| 8460 40 | – Honing or lapping machines | ||
| 8460 40 10 | – – Numerically controlled | 1,7 | p/st |
| 8460 40 90 | – – Other | 1,7 | p/st |
| 8460 90 00 | – Other | 1,7 | p/st |
| 8461 | Machine tools for planing, shaping, slotting, broaching, gear cutting, gear grinding or gear finishing, sawing, cutting-off and other machine tools working by removing metal or cermets, not elsewhere specified or included | ||
| 8461 20 00 | – Shaping or slotting machines | 1,7 | p/st |
| 8461 30 | – Broaching machines | ||
| 8461 30 10 | – – Numerically controlled | 1,7 | p/st |
| 8461 30 90 | – – Other | 1,7 | p/st |
| 8461 40 | – Gear-cutting, gear-grinding or gear-finishing machines | ||
| – – Gear-cutting machines (including abrasive gear-cutting machines) | |||
| – – – For cutting cylindrical gears | |||
| 8461 40 11 | – – – – Numerically controlled | 2,7 | p/st |
| 8461 40 19 | – – – – Other | 2,7 | p/st |
| – – – For cutting other gears | |||
| 8461 40 31 | – – – – Numerically controlled | 1,7 | p/st |
| 8461 40 39 | – – – – Other | 1,7 | p/st |
| – – Gear-finishing machines | |||
| – – – Fitted with a micrometric adjusting system, in which the positioning in any one axis can be set up to an accuracy of at least 0,01 mm | |||
| 8461 40 71 | – – – – Numerically controlled | 2,7 | p/st |
| 8461 40 79 | – – – – Other | 2,7 | p/st |
| 8461 40 90 | – – – Other | 1,7 | p/st |
| 8461 50 | – Sawing or cutting-off machines | ||
| – – Sawing machines | |||
| 8461 50 11 | – – – Circular saws | 1,7 | p/st |
| 8461 50 19 | – – – Other | 1,7 | p/st |
| 8461 50 90 | – – Cutting-off machines | 1,7 | p/st |
| 8461 90 00 | – Other | 2,7 | p/st |
| 8462 | Machine tools (including presses) for working metal by forging, hammering or die forging (excluding rolling mills); machine tools (including presses, slitting lines and cut-to-length lines) for working metal by bending, folding, straightening, flattening, shearing, punching, notching or nibbling (excluding draw-benches); presses for working metal or metal carbides, not specified above | ||
| – Hot forming machines for forging, die forging (including presses) and hot hammers | |||
| 8462 11 | – – Closed die forging machines | ||
| 8462 11 10 | – – – Numerically controlled | 2,7 | p/st |
| 8462 11 90 | – – – Other | 1,7 | p/st |
| 8462 19 | – – Other | ||
| 8462 19 10 | – – – Numerically controlled | 2,7 | p/st |
| 8462 19 90 | – – – Other | 1,7 | p/st |
| – Bending, folding, straightening or flattening machines (including press brakes) for flat products | |||
| 8462 22 | – – Profile forming machines | ||
| 8462 22 10 | – – – Numerically controlled | 2,7 | p/st |
| 8462 22 90 | – – – Other | 1,7 | p/st |
| 8462 23 00 | – – Numerically controlled press brakes | 2,7 | p/st |
| 8462 24 00 | – – Numerically controlled panel benders | 2,7 | p/st |
| 8462 25 00 | – – Numerically controlled roll forming machines | 2,7 | p/st |
| 8462 26 00 | – – Other numerically controlled bending, folding, straightening or flattening machines | 2,7 | p/st |
| 8462 29 | – – Other | ||
| 8462 29 10 | – – – Numerically controlled | 2,7 | p/st |
| 8462 29 90 | – – – Other | 1,7 | p/st |
| – Slitting lines, cut-to-length lines and other shearing machines (excluding presses) for flat products, other than combined punching and shearing machines | |||
| 8462 32 | – – Slitting lines and cut-to-length lines | ||
| 8462 32 10 | – – – Numerically controlled | 2,7 | p/st |
| 8462 32 90 | – – – Other | 1,7 | p/st |
| 8462 33 00 | – – Numerically controlled shearing machines | 2,7 | p/st |
| 8462 39 00 | – – Other | 1,7 | p/st |
| – Punching, notching or nibbling machines (excluding presses) for flat products including combined punching and shearing machines | |||
| 8462 42 00 | – – Numerically controlled | 2,7 | p/st |
| 8462 49 00 | – – Other | 1,7 | p/st |
| – Machines for working tube, pipe, hollow section and bar (excluding presses) | |||
| 8462 51 00 | – – Numerically controlled | 2,7 | p/st |
| 8462 59 00 | – – Other | 1,7 | p/st |
| – Cold metal working presses | |||
| 8462 61 | – – Hydraulic presses | ||
| 8462 61 10 | – – – Numerically controlled | 2,7 | p/st |
| 8462 61 90 | – – – Other | 2,7 | p/st |
| 8462 62 | – – Mechanical presses | ||
| 8462 62 10 | – – – Numerically controlled | 2,7 | p/st |
| 8462 62 90 | – – – Other | 1,7 | p/st |
| 8462 63 | – – Servo-presses | ||
| 8462 63 10 | – – – Numerically controlled | 2,7 | p/st |
| 8462 63 90 | – – – Other | 1,7 | p/st |
| 8462 69 | – – Other | ||
| 8462 69 10 | – – – Numerically controlled | 2,7 | p/st |
| 8462 69 90 | – – – Other | 1,7 | p/st |
| 8462 90 | – Other | ||
| 8462 90 10 | – – Numerically controlled | 2,7 | p/st |
| 8462 90 90 | – – Other | 1,7 | p/st |
| 8463 | Other machine tools for working metal or cermets, without removing material | ||
| 8463 10 | – Drawbenches for bars, tubes, profiles, wire or the like | ||
| 8463 10 10 | – – Drawbenches for wire | 2,7 | p/st |
| 8463 10 90 | – – Other | 2,7 | p/st |
| 8463 20 00 | – Thread-rolling machines | 2,7 | p/st |
| 8463 30 00 | – Machines for working wire | 2,7 | p/st |
| 8463 90 00 | – Other | 2,7 | p/st |
| 8464 | Machine tools for working stone, ceramics, concrete, asbestos-cement or like mineral materials or for cold working glass | ||
| 8464 10 00 | – Sawing machines | 2,2 | p/st |
| 8464 20 | – Grinding or polishing machines | ||
| – – For working glass | |||
| 8464 20 11 | – – – Optical glass | 2,2 | p/st |
| 8464 20 19 | – – – Other | 2,2 | — |
| 8464 20 80 | – – Other | 2,2 | — |
| 8464 90 00 | – Other | 2,2 | — |
| 8465 | Machine tools (including machines for nailing, stapling, glueing or otherwise assembling) for working wood, cork, bone, hard rubber, hard plastics or similar hard materials | ||
| 8465 10 | – Machines which can carry out different types of machining operations without tool change between such operations | ||
| 8465 10 10 | – – With manual transfer of workpiece between each operation | 2,7 | p/st |
| 8465 10 90 | – – With automatic transfer of workpiece between each operation | 2,7 | p/st |
| 8465 20 00 | – Machining centres | 2,7 | p/st |
| – Other | |||
| 8465 91 | – – Sawing machines | ||
| 8465 91 10 | – – – Bandsaws | 2,7 | p/st |
| 8465 91 20 | – – – Circular saws | 2,7 | p/st |
| 8465 91 90 | – – – Other | 2,7 | p/st |
| 8465 92 00 | – – Planing, milling or moulding (by cutting) machines | 2,7 | p/st |
| 8465 93 00 | – – Grinding, sanding or polishing machines | 2,7 | p/st |
| 8465 94 00 | – – Bending or assembling machines | 2,7 | p/st |
| 8465 95 00 | – – Drilling or morticing machines | 2,7 | p/st |
| 8465 96 00 | – – Splitting, slicing or paring machines | 2,7 | p/st |
| 8465 99 00 | – – Other | 2,7 | p/st |
| 8466 | Parts and accessories suitable for use solely or principally with the machines of headings 8456 to 8465, including work or tool holders, self-opening dieheads, dividing heads and other special attachments for the machines; tool holders for any type of tool for working in the hand | ||
| 8466 10 | – Tool holders and self-opening dieheads | ||
| – – Tool holders | |||
| 8466 10 20 | – – – Arbors, collets and sleeves | 1,2 | — |
| – – – Other | |||
| 8466 10 31 | – – – – For lathes | 1,2 | — |
| 8466 10 38 | – – – – Other | 1,2 | — |
| 8466 10 80 | – – Self-opening dieheads | 1,2 | — |
| 8466 20 | – Work holders | ||
| 8466 20 20 | – – Jigs and fixtures for specific applications; sets of standard jig and fixture components | 1,2 | — |
| – – Other | |||
| 8466 20 91 | – – – For lathes | 1,2 | — |
| 8466 20 98 | – – – Other | 1,2 | — |
| 8466 30 00 | – Dividing heads and other special attachments for machines | 1,2 | — |
| – Other | |||
| 8466 91 | – – For machines of heading 8464 | ||
| 8466 91 20 | – – – Of cast iron or cast steel | 1,2 | — |
| 8466 91 95 | – – – Other | 1,2 | — |
| 8466 92 | – – For machines of heading 8465 | ||
| 8466 92 20 | – – – Of cast iron or cast steel | 1,2 | — |
| 8466 92 80 | – – – Other | 1,2 | — |
| 8466 93 | – – For machines of headings 8456 to 8461 | ||
| 8466 93 40 | – – – Parts and accessories of machines of subheadings 8456 11 10, 8456 12 10, 8456 20, 8456 30, 8457 10, 8458 91, 8459 21 00, 8459 61 or 8461 50 of a kind used solely or principally for the manufacture of printed circuits, printed circuit assemblies, parts of heading 8517, or parts of automatic data processing machines | Free | — |
| – – – Other | |||
| 8466 93 50 | – – – – For machines of subheading 8456 50 00 | 1,7 | — |
| 8466 93 60 | – – – – Other | 1,2 | — |
| 8466 94 00 | – – For machines of heading 8462 or 8463 | 1,2 | — |
| 8467 | Tools for working in the hand, pneumatic, hydraulic or with self-contained electric or non-electric motor | ||
| – Pneumatic | |||
| 8467 11 | – – Rotary type (including combined rotary-percussion) | ||
| 8467 11 10 | – – – Metalworking | 1,7 | — |
| 8467 11 90 | – – – Other | 1,7 | — |
| 8467 19 00 | – – Other | 1,7 | — |
| – With self-contained electric motor | |||
| 8467 21 | – – Drills of all kinds | ||
| 8467 21 10 | – – – Capable of operation without an external source of power | 2,7 | p/st |
| – – – Other | |||
| 8467 21 91 | – – – – Electropneumatic | 2,7 | p/st |
| 8467 21 99 | – – – – Other | 2,7 | p/st |
| 8467 22 | – – Saws | ||
| 8467 22 10 | – – – Chainsaws | 2,7 | p/st |
| 8467 22 30 | – – – Circular saws | 2,7 | p/st |
| 8467 22 90 | – – – Other | 2,7 | p/st |
| 8467 29 | – – Other | ||
| 8467 29 20 | – – – Capable of operation without an external source of power | 2,7 | p/st |
| – – – Other | |||
| – – – – Grinders and sanders | |||
| 8467 29 51 | – – – – – Angle grinders | 2,7 | p/st |
| 8467 29 53 | – – – – – Belt sanders | 2,7 | p/st |
| 8467 29 59 | – – – – – Other | 2,7 | p/st |
| 8467 29 70 | – – – – Planers | 2,7 | p/st |
| 8467 29 80 | – – – – Hedge trimmers and lawn edge cutters | 2,7 | p/st |
| 8467 29 85 | – – – – Other | 2,7 | p/st |
| – Other tools | |||
| 8467 81 00 | – – Chainsaws | 1,7 | p/st |
| 8467 89 00 | – – Other | 1,7 | — |
| – Parts | |||
| 8467 91 00 | – – Of chainsaws | 1,7 | — |
| 8467 92 00 | – – Of pneumatic tools | 1,7 | — |
| 8467 99 00 | – – Other | 1,7 | — |
| 8468 | Machinery and apparatus for soldering, brazing or welding, whether or not capable of cutting, other than those of heading 8515; gas-operated surface tempering machines and appliances | ||
| 8468 10 00 | – Hand-held blow pipes | 2,2 | — |
| 8468 20 00 | – Other gas-operated machinery and apparatus | 2,2 | — |
| 8468 80 00 | – Other machinery and apparatus | 2,2 | — |
| 8468 90 00 | – Parts | 2,2 | — |
| 8469 | |||
| 8470 | Calculating machines and pocket-size data-recording, reproducing and displaying machines with calculating functions; accounting machines, postage-franking machines, ticket-issuing machines and similar machines, incorporating a calculating device; cash registers | ||
| 8470 10 00 | – Electronic calculators capable of operation without an external source of electric power and pocket-size data-recording, reproducing and displaying machines with calculating functions | Free | p/st |
| – Other electronic calculating machines | |||
| 8470 21 00 | – – Incorporating a printing device | Free | p/st |
| 8470 29 00 | – – Other | Free | p/st |
| 8470 30 00 | – Other calculating machines | Free | p/st |
| 8470 50 00 | – Cash registers | Free | p/st |
| 8470 90 00 | – Other | Free | p/st |
| 8471 | Automatic data-processing machines and units thereof; magnetic or optical readers, machines for transcribing data onto data media in coded form and machines for processing such data, not elsewhere specified or included | ||
| 8471 30 00 | – Portable automatic data-processing machines, weighing not more than 10 kg, consisting of at least a central processing unit, a keyboard and a display | Free | p/st |
| – Other automatic data-processing machines | |||
| 8471 41 00 | – – Comprising in the same housing at least a central processing unit and an input and output unit, whether or not combined | Free | p/st |
| 8471 49 00 | – – Other, presented in the form of systems | Free | p/st |
| 8471 50 00 | – Processing units other than those of subheading 8471 41 or 8471 49, whether or not containing in the same housing one or two of the following types of unit: storage units, input units, output units | Free | p/st |
| 8471 60 | – Input or output units, whether or not containing storage units in the same housing | ||
| 8471 60 60 | – – Keyboards | Free | p/st |
| 8471 60 70 | – – Other | Free | p/st |
| 8471 70 | – Storage units | ||
| 8471 70 20 | – – Central storage units | Free | p/st |
| – – Other | |||
| – – – Disk storage units | |||
| 8471 70 30 | – – – – Optical, including magneto-optical | Free | p/st |
| – – – – Other | |||
| 8471 70 50 | – – – – – Hard disk drives | Free | p/st |
| 8471 70 70 | – – – – – Other | Free | p/st |
| 8471 70 80 | – – – Magnetic tape storage units | Free | p/st |
| 8471 70 98 | – – – Other | Free | p/st |
| 8471 80 00 | – Other units of automatic data-processing machines | Free | p/st |
| 8471 90 00 | – Other | Free | p/st |
| 8472 | Other office machines (for example, hectograph or stencil duplicating machines, addressing machines, automatic banknote dispensers, coin-sorting machines, coin-counting or -wrapping machines, pencil-sharpening machines, perforating or stapling machines) | ||
| 8472 10 00 | – Duplicating machines | Free | p/st |
| 8472 30 00 | – Machines for sorting or folding mail or for inserting mail in envelopes or bands, machines for opening, closing or sealing mail and machines for affixing or cancelling postage stamps | 2,2 | p/st |
| 8472 90 | – Other | ||
| 8472 90 10 | – – Coin-sorting, coin-counting or coin-wrapping machines | Free | p/st |
| 8472 90 80 | – – Other | Free | — |
| 8473 | Parts and accessories (other than covers, carrying cases and the like) suitable for use solely or principally with machines of headings 8470 to 8472 | ||
| – Parts and accessories of the machines of heading 8470 | |||
| 8473 21 | – – Of the electronic calculating machines of subheading 8470 10, 8470 21 or 8470 29 | ||
| 8473 21 10 | – – – Electronic assemblies | Free | — |
| 8473 21 90 | – – – Other | Free | — |
| 8473 29 | – – Other | ||
| 8473 29 10 | – – – Electronic assemblies | Free | — |
| 8473 29 90 | – – – Other | Free | — |
| 8473 30 | – Parts and accessories of the machines of heading 8471 | ||
| 8473 30 20 | – – Electronic assemblies | Free | — |
| 8473 30 80 | – – Other | Free | — |
| 8473 40 | – Parts and accessories of the machines of heading 8472 | ||
| 8473 40 10 | – – Electronic assemblies | Free | — |
| 8473 40 80 | – – Other | Free | — |
| 8473 50 | – Parts and accessories equally suitable for use with machines of two or more of the headings 8470 to 8472 | ||
| 8473 50 20 | – – Electronic assemblies | Free | — |
| 8473 50 80 | – – Other | Free | — |
| 8474 | Machinery for sorting, screening, separating, washing, crushing, grinding, mixing or kneading earth, stone, ores or other mineral substances, in solid (including powder or paste) form; machinery for agglomerating, shaping or moulding solid mineral fuels, ceramic paste, unhardened cements, plastering materials or other mineral products in powder or paste form; machines for forming foundry moulds of sand | ||
| 8474 10 00 | – Sorting, screening, separating or washing machines | Free | — |
| 8474 20 00 | – Crushing or grinding machines | Free | — |
| – Mixing or kneading machines | |||
| 8474 31 00 | – – Concrete or mortar mixers | Free | — |
| 8474 32 00 | – – Machines for mixing mineral substances with bitumen | Free | — |
| 8474 39 00 | – – Other | Free | — |
| 8474 80 | – Other machinery | ||
| 8474 80 10 | – – Machinery for agglomerating, shaping or moulding ceramic paste | Free | — |
| 8474 80 90 | – – Other | Free | — |
| 8474 90 | – Parts | ||
| 8474 90 10 | – – Of cast iron or cast steel | Free | — |
| 8474 90 90 | – – Other | Free | — |
| 8475 | Machines for assembling electric or electronic lamps, tubes or valves or flashbulbs, in glass envelopes; machines for manufacturing or hot working glass or glassware | ||
| 8475 10 00 | – Machines for assembling electric or electronic lamps, tubes or valves or flashbulbs, in glass envelopes | 1,7 | — |
| – Machines for manufacturing or hot working glass or glassware | |||
| 8475 21 00 | – – Machines for making optical fibres and preforms thereof | Free | — |
| 8475 29 00 | – – Other | 1,7 | — |
| 8475 90 | – Parts | ||
| 8475 90 10 | – – Parts of machines of subheading 8475 21 00 | Free | — |
| 8475 90 90 | – – Other | 1,7 | — |
| 8476 | Automatic goods-vending machines (for example, postage stamp, cigarette, food or beverage machines), including money-changing machines | ||
| – Automatic beverage-vending machines | |||
| 8476 21 00 | – – Incorporating heating or refrigerating devices | 1,7 | p/st |
| 8476 29 00 | – – Other | 1,7 | p/st |
| – Other machines | |||
| 8476 81 00 | – – Incorporating heating or refrigerating devices | 1,7 | p/st |
| 8476 89 | – – Other | ||
| 8476 89 10 | – – – Money-changing machines | Free | p/st |
| 8476 89 90 | – – – Other | 1,7 | p/st |
| 8476 90 | – Parts | ||
| 8476 90 10 | – – Parts of money-changing machines | Free | — |
| 8476 90 90 | – – Other | 1,7 | — |
| 8477 | Machinery for working rubber or plastics or for the manufacture of products from these materials, not specified or included elsewhere in this chapter | ||
| 8477 10 00 | – Injection-moulding machines | 1,7 | p/st |
| 8477 20 00 | – Extruders | 1,7 | p/st |
| 8477 30 00 | – Blow-moulding machines | 1,7 | p/st |
| 8477 40 00 | – Vacuum-moulding machines and other thermoforming machines | 1,7 | p/st |
| – Other machinery for moulding or otherwise forming | |||
| 8477 51 00 | – – For moulding or retreading pneumatic tyres or for moulding or otherwise forming inner tubes | 1,7 | p/st |
| 8477 59 | – – Other | ||
| 8477 59 10 | – – – Presses | 1,7 | p/st |
| 8477 59 80 | – – – Other | 1,7 | p/st |
| 8477 80 | – Other machinery | ||
| – – Machines for the manufacture of foam products | |||
| 8477 80 11 | – – – Machines for processing reactive resins | 1,7 | p/st |
| 8477 80 19 | – – – Other | 1,7 | p/st |
| – – Other | |||
| 8477 80 91 | – – – Size reduction equipment | 1,7 | p/st |
| 8477 80 93 | – – – Mixers, kneaders and agitators | 1,7 | p/st |
| 8477 80 95 | – – – Cutting, splitting and peeling machines | 1,7 | p/st |
| 8477 80 99 | – – – Other | 1,7 | — |
| 8477 90 | – Parts | ||
| 8477 90 10 | – – Of cast iron or cast steel | 1,7 | — |
| 8477 90 80 | – – Other | 1,7 | — |
| 8478 | Machinery for preparing or making up tobacco, not specified or included elsewhere in this chapter | ||
| 8478 10 00 | – Machinery | 1,7 | — |
| 8478 90 00 | – Parts | 1,7 | — |
| 8479 | Machines and mechanical appliances having individual functions, not specified or included elsewhere in this chapter | ||
| 8479 10 00 | – Machinery for public works, building or the like | Free | — |
| 8479 20 00 | – Machinery for the extraction or preparation of animal or fixed vegetable or microbial fats or oils | 1,7 | — |
| 8479 30 | – Presses for the manufacture of particle board or fibre building board of wood or other ligneous materials and other machinery for treating wood or cork | ||
| 8479 30 10 | – – Presses | 1,7 | — |
| 8479 30 90 | – – Other | 1,7 | — |
| 8479 40 00 | – Rope- or cable-making machines | 1,7 | p/st |
| 8479 50 00 | – Industrial robots, not elsewhere specified or included | 1,7 | — |
| 8479 60 00 | – Evaporative air coolers | 1,7 | — |
| – Passenger boarding bridges | |||
| 8479 71 00 | – – Of a kind used in airports | 1,7 | — |
| 8479 79 00 | – – Other | 1,7 | — |
| – Other machines and mechanical appliances | |||
| 8479 81 00 | – – For treating metal, including electric wire coil-winders | 1,7 | — |
| 8479 82 00 | – – Mixing, kneading, crushing, grinding, screening, sifting, homogenising, emulsifying or stirring machines | 1,7 | — |
| 8479 83 00 | – – Cold isostatic presses | 1,7 | — |
| 8479 89 | – – Other | ||
| 8479 89 30 | – – – Mobile hydraulic-powered mine roof supports | 1,7 | — |
| 8479 89 60 | – – – Central greasing systems | 1,7 | — |
| 8479 89 70 | – – – Automated electronic component placement machines of a kind used solely or principally for the manufacture of printed circuit assemblies | Free | — |
| 8479 89 97 | – – – Other | 1,7 | — |
| 8479 90 | – Parts | ||
| 8479 90 15 | – – Parts of machines of subheading 8479 89 70 | Free | — |
| – – Other | |||
| 8479 90 20 | – – – Of cast iron or cast steel | 1,7 | — |
| 8479 90 70 | – – – Other | 1,7 | — |
| 8480 | Moulding boxes for metal foundry; mould bases; moulding patterns; moulds for metal (other than ingot moulds), metal carbides, glass, mineral materials, rubber or plastics | ||
| 8480 10 00 | – Moulding boxes for metal foundry | 1,7 | — |
| 8480 20 00 | – Mould bases | 1,7 | — |
| 8480 30 | – Moulding patterns | ||
| 8480 30 10 | – – Of wood | 1,7 | — |
| 8480 30 90 | – – Other | 2,7 | — |
| – Moulds for metal or metal carbides | |||
| 8480 41 00 | – – Injection or compression types | 1,7 | — |
| 8480 49 00 | – – Other | 1,7 | — |
| 8480 50 00 | – Moulds for glass | 1,7 | — |
| 8480 60 00 | – Moulds for mineral materials | 1,7 | — |
| – Moulds for rubber or plastics | |||
| 8480 71 00 | – – Injection or compression types | 1,7 | — |
| 8480 79 00 | – – Other | 1,7 | — |
| 8481 | Taps, cocks, valves and similar appliances for pipes, boiler shells, tanks, vats or the like, including pressure-reducing valves and thermostatically controlled valves | ||
| 8481 10 | – Pressure-reducing valves | ||
| 8481 10 05 | – – Combined with filters or lubricators | 2,2 | — |
| – – Other | |||
| 8481 10 19 | – – – Of cast iron or of steel | 2,2 | — |
| 8481 10 99 | – – – Other | 2,2 | — |
| 8481 20 | – Valves for oleohydraulic or pneumatic transmissions | ||
| 8481 20 10 | – – Valves for the control of oleohydraulic power transmission | 2,2 | — |
| 8481 20 90 | – – Valves for the control of pneumatic power transmission | 2,2 | — |
| 8481 30 | – Check (non-return) valves | ||
| 8481 30 91 | – – Of cast iron or of steel | 2,2 | — |
| 8481 30 99 | – – Other | 2,2 | — |
| 8481 40 | – Safety or relief valves | ||
| 8481 40 10 | – – Of cast iron or of steel | 2,2 | — |
| 8481 40 90 | – – Other | 2,2 | — |
| 8481 80 | – Other appliances | ||
| – – Taps, cocks and valves for sinks, washbasins, bidets, water cisterns, baths and similar fixtures | |||
| 8481 80 11 | – – – Mixing valves | 2,2 | — |
| 8481 80 19 | – – – Other | 2,2 | — |
| – – Central heating radiator valves | |||
| 8481 80 31 | – – – Thermostatic valves | 2,2 | — |
| 8481 80 39 | – – – Other | 2,2 | — |
| 8481 80 40 | – – Valves for pneumatic tyres and inner tubes | 2,2 | — |
| – – Other | |||
| – – – Process control valves | |||
| 8481 80 51 | – – – – Temperature regulators | 2,2 | — |
| 8481 80 59 | – – – – Other | 2,2 | — |
| – – – Other | |||
| – – – – Gate valves | |||
| 8481 80 61 | – – – – – Of cast iron | 2,2 | — |
| 8481 80 63 | – – – – – Of steel | 2,2 | — |
| 8481 80 69 | – – – – – Other | 2,2 | — |
| – – – – Globe valves | |||
| 8481 80 71 | – – – – – Of cast iron | 2,2 | — |
| 8481 80 73 | – – – – – Of steel | 2,2 | — |
| 8481 80 79 | – – – – – Other | 2,2 | — |
| 8481 80 81 | – – – – Ball and plug valves | 2,2 | — |
| 8481 80 85 | – – – – Butterfly valves | 2,2 | — |
| 8481 80 87 | – – – – Diaphragm valves | 2,2 | — |
| 8481 80 99 | – – – – Other | 2,2 | — |
| 8481 90 00 | – Parts | 2,2 | — |
| 8482 | Ball or roller bearings | ||
| 8482 10 | – Ball bearings | ||
| 8482 10 10 | – – With greatest external diameter not exceeding 30 mm | 8 | — |
| 8482 10 90 | – – Other | 8 | — |
| 8482 20 00 | – Tapered roller bearings, including cone and tapered roller assemblies | 8 | — |
| 8482 30 00 | – Spherical roller bearings | 8 | — |
| 8482 40 00 | – Needle roller bearings, including cage and needle roller assemblies | 8 | — |
| 8482 50 00 | – Other cylindrical roller bearings, including cage and roller assemblies | 8 | — |
| 8482 80 00 | – Other, including combined ball/roller bearings | 8 | — |
| – Parts | |||
| 8482 91 | – – Balls, needles and rollers | ||
| 8482 91 10 | – – – Tapered rollers | 8 | — |
| 8482 91 90 | – – – Other | 7,7 | — |
| 8482 99 00 | – – Other | 8 | — |
| 8483 | Transmission shafts (including cam shafts and crank shafts) and cranks; bearing housings and plain shaft bearings; gears and gearing; ball or roller screws; gear boxes and other speed changers, including torque converters; flywheels and pulleys, including pulley blocks; clutches and shaft couplings (including universal joints) | ||
| 8483 10 | – Transmission shafts (including cam shafts and crank shafts) and cranks | ||
| – – Cranks and crank shafts | |||
| 8483 10 21 | – – – Of cast iron or cast steel | 4 | — |
| 8483 10 25 | – – – Of open-die forged steel | 4 | — |
| 8483 10 29 | – – – Other | 4 | — |
| 8483 10 50 | – – Articulated shafts | 4 | — |
| 8483 10 95 | – – Other | 4 | — |
| 8483 20 00 | – Bearing housings, incorporating ball or roller bearings | 6 | — |
| 8483 30 | – Bearing housings, not incorporating ball or roller bearings; plain shaft bearings | ||
| – – Bearing housings | |||
| 8483 30 32 | – – – For ball or roller bearings | 5,7 | — |
| 8483 30 38 | – – – Other | 3,4 | — |
| 8483 30 80 | – – Plain shaft bearings | 3,4 | — |
| 8483 40 | – Gears and gearing, other than toothed wheels, chain sprockets and other transmission elements presented separately; ball or roller screws; gear boxes and other speed changers, including torque converters | ||
| – – Gears and gearing (other than friction gears) | |||
| 8483 40 21 | – – – Spur and helical | 3,7 | — |
| 8483 40 23 | – – – Bevel and bevel/spur | 3,7 | — |
| 8483 40 25 | – – – Worm gear | 3,7 | — |
| 8483 40 29 | – – – Other | 3,7 | — |
| 8483 40 30 | – – Ball or roller screws | 3,7 | — |
| – – Gear boxes and other speed changers | |||
| 8483 40 51 | – – – Gear boxes | 3,7 | — |
| 8483 40 59 | – – – Other | 3,7 | — |
| 8483 40 90 | – – Other | 3,7 | — |
| 8483 50 | – Flywheels and pulleys, including pulley blocks | ||
| 8483 50 20 | – – Of cast iron or cast steel | 2,7 | — |
| 8483 50 80 | – – Other | 2,7 | — |
| 8483 60 | – Clutches and shaft couplings (including universal joints) | ||
| 8483 60 20 | – – Of cast iron or cast steel | 2,7 | — |
| 8483 60 80 | – – Other | 2,7 | — |
| 8483 90 | – Toothed wheels, chain sprockets and other transmission elements presented separately; parts | ||
| 8483 90 20 | – – Parts of bearing housings | 5,7 | — |
| – – Other | |||
| 8483 90 81 | – – – Of cast iron or cast steel | 2,7 | — |
| 8483 90 89 | – – – Other | 2,7 | — |
| 8484 | Gaskets and similar joints of metal sheeting combined with other material or of two or more layers of metal; sets or assortments of gaskets and similar joints, dissimilar in composition, put up in pouches, envelopes or similar packings; mechanical seals | ||
| 8484 10 00 | – Gaskets and similar joints of metal sheeting combined with other material or of two or more layers of metal | 1,7 | — |
| 8484 20 00 | – Mechanical seals | 1,7 | — |
| 8484 90 00 | – Other | 1,7 | — |
| 8485 | Machines for additive manufacturing | ||
| 8485 10 00 | – By metal deposit | 2,7 | p/st |
| 8485 20 00 | – By plastics or rubber deposit | 1,7 | p/st |
| 8485 30 | – By plaster, cement, ceramics or glass deposit | ||
| 8485 30 10 | – – By plaster, cement, or ceramic deposit | Free | — |
| 8485 30 90 | – – Other | 1,7 | p/st |
| 8485 80 00 | – Other | 1,7 | p/st |
| 8485 90 | – Parts | ||
| 8485 90 10 | – – Parts of machines of subheading 8485 30 10 | Free | — |
| 8485 90 90 | – – Other | 1,7 | — |
| 8486 | Machines and apparatus of a kind used solely or principally for the manufacture of semiconductor boules or wafers, semiconductor devices, electronic integrated circuits or flat panel displays; machines and apparatus specified in note 11(C) to this chapter; parts and accessories | ||
| 8486 10 00 | – Machines and apparatus for the manufacture of boules or wafers | Free | — |
| 8486 20 00 | – Machines and apparatus for the manufacture of semiconductor devices or of electronic integrated circuits | Free | — |
| 8486 30 00 | – Machines and apparatus for the manufacture of flat panel displays | Free | — |
| 8486 40 00 | – Machines and apparatus specified in note 11(C) to this chapter | Free | — |
| 8486 90 00 | – Parts and accessories | Free | — |
| 8487 | Machinery parts, not containing electrical connectors, insulators, coils, contacts or other electrical features, not specified or included elsewhere in this chapter | ||
| 8487 10 | – Ships' or boats' propellers and blades therefor | ||
| 8487 10 10 | – – Of bronze | 1,7 | p/st |
| 8487 10 90 | – – Other | 1,7 | p/st |
| 8487 90 | – Other | ||
| 8487 90 40 | – – Of cast iron | 1,7 | — |
| – – Of iron or steel | |||
| 8487 90 51 | – – – Of cast steel | 1,7 | — |
| 8487 90 57 | – – – Of open-die forged or closed-die forged iron or steel | 1,7 | — |
| 8487 90 59 | – – – Other | 1,7 | — |
| 8487 90 90 | – – Other | 1,7 | — |
CHAPTER 85
ELECTRICAL MACHINERY AND EQUIPMENT AND PARTS THEREOF; SOUND RECORDERS AND REPRODUCERS, TELEVISION IMAGE AND SOUND RECORDERS AND REPRODUCERS, AND PARTS AND ACCESSORIES OF SUCH ARTICLES
Notes
-
- This chapter does not cover:
- (a) electrically warmed blankets, bed pads, foot-muffs or the like; electrically warmed clothing, footwear or ear pads or other electrically warmed articles worn on or about the person;
- (b) articles of glass of heading 7011;
- (c) machines and apparatus of heading 8486;
- (d) vacuum apparatus of a kind used in medical, surgical, dental or veterinary science (heading 9018); or
- (e) electrically heated furniture of Chapter 94.
-
- Headings 8501 to 8504 do not apply to goods described in heading 8511, 8512, 8540, 8541 or 8542.
However, metal tank mercury arc rectifiers remain classified in heading 8504.
-
- For the purposes of heading 8507, the expression ‘electric accumulators’ includes those presented with ancillary components which contribute to the accumulator’s function of storing and supplying energy or protect it from damage, such as electrical connectors, temperature control devices (e.g., thermistors) and circuit protection devices. They may also include a portion of the protective housing of the goods in which they are to be used.
-
- Heading 8509 covers only the following electromechanical machines of the kind commonly used for domestic purposes:
- (a) floor polishers, food grinders and mixers, and fruit or vegetable juice extractors, of any weight;
- (b) other machines provided the weight of such machines does not exceed 20 kg. The heading does not, however, apply to fans or ventilating or recycling hoods incorporating a fan, whether or not fitted with filters (heading 8414), centrifugal clothes-dryers (heading 8421), dishwashing machines (heading 8422), household washing machines (heading 8450), roller or other ironing machines (heading 8420 or 8451), sewing machines (heading 8452), electric scissors (heading 8467) or to electrothermic appliances (heading 8516).
-
- For the purposes of heading 8517, the term ‘smartphones’ means telephones for cellular networks, equipped with a mobile operating system designed to perform the functions of an automatic data processing machine such as downloading and running multiple applications simultaneously, including third-party applications, and whether or not integrating other features such as digital cameras and navigational aid systems.
-
- For the purposes of heading 8523:
- (a) ‘solid-state non-volatile storage devices’ (for example, ‘flash memory cards’ or ‘flash electronic storage cards’) are storage devices with a connecting socket, comprising in the same housing one or more flash memories (for example, ‘Flash E2PROM’) in the form of integrated circuits mounted on a printed circuit board. They may include a controller in the form of an integrated circuit and discrete passive components, such as capacitors and resistors;
- (b) the term ‘smart cards’ means cards which have embedded in them one or more electronic integrated circuits (a microprocessor, random access memory (RAM) or read-only memory (ROM)) in the form of chips. These cards may contain contacts, a magnetic stripe or an embedded antenna but do not contain any other active or passive circuit elements.
-
- For the purposes of heading 8524, ‘flat panel display modules’ refer to devices or apparatus for the display of information, equipped at a minimum with a display screen, which are designed to be incorporated into articles of other headings prior to use. Display screens for flat panel display modules include, but are not limited to, those which are flat, curved, flexible, foldable or stretchable in form. Flat panel display modules may incorporate additional elements, including those necessary for receiving video signals and the allocation of those signals to pixels on the display. However, heading 8524 does not include display modules which are equipped with components for converting video signals (e.g., a scaler IC, decoder IC or application processer) or have otherwise assumed the character of goods of other headings.
For the classification of flat panel display modules defined in this note, heading 8524 shall take precedence over any other heading in the nomenclature.
-
- For the purposes of heading 8534, ‘printed circuits’ are circuits obtained by forming on an insulating base, by any printing process (for example, embossing, plating-up, etching) or by the ‘film circuit’ technique, conductor elements, contacts or other printed components (for example, inductances, resistors, capacitors) alone or interconnected according to a pre-established pattern, other than elements which can produce, rectify, modulate or amplify an electrical signal (for example, semiconductor elements).
The expression ‘printed circuits’ does not cover circuits combined with elements other than those obtained during the printing process, nor does it cover individual, discrete resistors, capacitors or inductances. Printed circuits may, however, be fitted with non-printed connecting elements.
Thin- or thick-film circuits comprising passive and active elements obtained during the same technological process are to be classified in heading 8542.
-
- For the purpose of heading 8536, ‘connectors for optical fibres, optical-fibre bundles or cables’ means connectors that simply mechanically align optical fibres end to end in a digital line system. They perform no other function, such as the amplification, regeneration or modification of a signal.
-
- Heading 8537 does not include cordless infrared devices for the remote control of television receivers or other electrical equipment (heading 8543).
-
- For the purposes of heading 8539, the expression ‘light-emitting diode (LED) light sources’ covers:
- (a) ‘light-emitting diode (LED) modules’ which are electrical light sources based on light-emitting diodes (LED) arranged in electrical circuits and containing further elements like electrical, mechanical, thermal or optical elements. They also contain discrete active elements, discrete passive elements, or articles of heading 8536 or 8542 for the purposes of providing power supply or power control. Light-emitting diode (LED) modules do not have a cap designed to allow easy installation or replacement in a luminaire and ensure mechanical and electrical contact;
- (b) ‘light-emitting diode (LED) lamps’ which are electrical light sources containing one or more LED modules containing further elements like electrical, mechanical, thermal or optical elements. The distinction between light-emitting diode (LED) modules and light-emitting diode (LED) lamps is that lamps have a cap designed to allow easy installation or replacement in a luminaire and ensure mechanical and electrical contact.
-
- For the purposes of headings 8541 and 8542:
- (a) - (i) ‘Semiconductor devices’ are semiconductor devices the operation of which depends on variations in resistivity on the application of an electric field or semiconductor-based transducers.
Semiconductor devices may also include assembly of plural elements, whether or not equipped with active and passive device ancillary functions.
‘Semiconductor-based transducers’ are, for the purposes of this definition, semiconductor-based sensors, semiconductor-based actuators, semiconductor-based resonators and semiconductor-based oscillators, which are types of discrete semiconductor-based devices, which perform an intrinsic function, which are able to convert any kind of physical or chemical phenomena or an action into an electrical signal or an electrical signal into any type of physical phenomenon or an action.
All the elements in semiconductor-based transducers are indivisibly combined, and may also include necessary materials indivisibly attached, that enable their construction or function.
The following expressions mean:
- (1) ‘Semiconductor-based’ means built or manufactured on a semiconductor substrate or made of semiconductor materials, manufactured by semiconductor technology, in which the semiconductor substrate or material plays a critical and unreplaceable role of transducer function and performance, and the operation of which is based on semiconductor properties including physical, electrical, chemical and optical properties.
- (2) ‘Physical or chemical phenomena’ relate to phenomena, such as pressure, acoustic waves, acceleration, vibration, movement, orientation, strain, magnetic field strength, electric field strength, light, radioactivity, humidity, flow, chemicals concentration, etc.
- (3) ‘Semiconductor-based sensor’ is a type of semiconductor device, which consists of microelectronic or mechanical structures that are created in the mass or on the surface of a semiconductor and that have the function of detecting physical or chemical quantities and converting these into electric signals caused by resulting variations in electric properties or displacement of a mechanical structure.
- (4) ‘Semiconductor-based actuator’ is a type of semiconductor device, which consists of microelectronic or mechanical structures that are created in the mass or on the surface of a semiconductor and that have the function of converting electric signals into physical movement.
- (5) ‘Semiconductor-based resonator’ is a type of semiconductor device, which consists of microelectronic or mechanical structures that are created in the mass or on the surface of a semiconductor and that have the function of generating a mechanical or electrical oscillation of a predefined frequency that depends on the physical geometry of these structures in response to an external input.
- (6) ‘Semiconductor-based oscillator’ is a type of semiconductor device, which consists of microelectronic or mechanical structures that are created in the mass or on the surface of a semiconductor and that have the function of generating a mechanical or electrical oscillation of a predefined frequency that depends on the physical geometry of these structures.
- (ii) ‘Light-emitting diodes (LED)’ are semiconductor devices based on semiconductor materials which convert electrical energy into visible, infra-red or ultra-violet rays, whether or not electrically connected among each other and whether or not combined with protective diodes.
Light-emitting diodes (LED) of heading 8541 do not incorporate elements for the purposes of providing power supply or power control;
- (b) ‘Electronic integrated circuits’ are:
- (1) monolithic integrated circuits in which the circuit elements (diodes, transistors, resistors, capacitors, inductances, etc.) are created in the mass (essentially) and on the surface of a semiconductor or compound semiconductor material (for example, doped silicon, gallium arsenide, silicon germanium, indium phosphide) and are inseparably associated;
- (2) hybrid integrated circuits in which passive elements (resistors, capacitors, inductances, etc.), obtained by thin- or thick-film technology, and active elements (diodes, transistors, monolithic integrated circuits, etc.), obtained by semiconductor technology, are combined to all intents and purposes indivisibly, by interconnections or interconnecting cables, on a single insulating substrate (glass, ceramic, etc.). These circuits may also include discrete components;
- (3) multichip integrated circuits consisting of two or more interconnected monolithic integrated circuits combined to all intents and purposes indivisibly, whether or not on one or more insulating substrates, with or without leadframes, but with no other active or passive circuit elements;
- (4) multi-component integrated circuits (MCOs) : a combination of one or more monolithic, hybrid, or multi-chip integrated circuits with at least one of the following components : silicon-based sensors, actuators, oscillators, resonators or combinations thereof, or components performing the functions of articles classifiable under heading 8532, 8533, 8541, or inductors classifiable under heading 8504, formed to all intents and purposes indivisibly into a single body like an integrated circuit, as a component of a kind used for assembly onto a printed circuit board (PCB) or other carrier, through the connecting of pins, leads, balls, lands, bumps, or pads.
For the purpose of this definition :
- (1) ‘Components’ may be discrete, manufactured independently then assembled onto the rest of the MCO, or integrated into other components.
- (2) ‘Silicon based’ means built on a silicon substrate, or made of silicon materials, or manufactured onto integrated circuit die.
- (3) - (a) ‘Silicon based sensors’ consist of microelectronic or mechanical structures that are created in the mass or on the surface of a semiconductor and that have the function of detecting physical or chemical phenomena and transducing these into electric signals, caused by resulting variations in electric properties or displacement of a mechanical structure. ‘Physical or chemical phenomena’ relates to phenomena, such as pressure, acoustic waves, acceleration, vibration, movement, orientation, strain, magnetic field strength, electric field strength, light, radioactivity, humidity, flow, chemicals concentration, etc.
- (b) ‘Silicon based actuators’ consist of microelectronic and mechanical structures that are created in the mass or on the surface of a semiconductor and that have the function of converting electrical signals into physical movement.
- (c) ‘Silicon based resonators’ are components that consist of microelectronic or mechanical structures that are created in the mass or on the surface of a semiconductor and have the function of generating a mechanical or electrical oscillation of a predefined frequency that depends on the physical geometry of these structures in response to an external input.
- (d) ‘Silicon based oscillators’ are active components that consist of microelectronic or mechanical structures that are created in the mass or on the surface of a semiconductor and that have the function of generating a mechanical or electrical oscillation of a predefined frequency that depends on the physical geometry of these structures.
For the classification of the articles defined in this note, headings 8541 and 8542 shall take precedence over any other heading in the nomenclature, except in the case of heading 8523, which might cover them by reference to, in particular, their function.
Subheading notes
-
- Subheading 8525 81 covers only high-speed television cameras, digital cameras and video camera recorders having one or more of the following characteristics:
- writing speed exceeding 0,5 mm per microsecond;
- time resolution 50 nanoseconds or less;
- frame rate exceeding 225 000 frames per second.
-
- In respect of subheading 8525 82, radiation-hardened or radiation-tolerant television cameras, digital cameras and video camera recorders are designed or shielded to enable operation in a high-radiation environment. These cameras are designed to withstand a total radiation dose of at least 50 × 103 Gy(silicon) (5 × 106 RAD (silicon)), without operational degradation.
-
- Subheading 8525 83 covers night vision television cameras, digital cameras and video camera recorders which use a photocathode to convert available light to electrons, which can be amplified and converted to yield a visible image. This subheading excludes thermal imaging cameras (generally subheading 8525 89).
-
- Subheading 8527 12 covers only cassette-players with built-in amplifier, without built-in loudspeaker, capable of operating without an external source of electric power and the dimensions of which do not exceed 170 mm × 100 mm × 45 mm.
-
- For the purposes of subheadings 8549 11 to 8549 19, ‘spent primary cells, spent primary batteries and spent electric accumulators’ are those which are neither usable as such because of breakage, cutting-up, wear or other reasons, nor capable of being recharged.
Additional notes
-
- Subheadings 8519 20 10 and 8519 30 00 are to be taken not to apply to sound reproducing apparatus with laser reading system.
-
- For the purposes of subheadings 8528 71 15 and 8528 71 91 only, the term ‘modem’ covers devices or equipment that modulate and demodulate incoming and outgoing signals, such as V.90-modems or cable modems, and other devices that use like technologies for gaining access to the Internet, such as WLAN, ISDN and Ethernet. The extent of access to the Internet may be limited by the service provider.
Apparatus of these subheadings must enable a two-way communication process or the two-way flow of information for the purposes of providing interactive information exchange.
Reading this document does not replace reading the official text published in the Official Journal of the European Union. We assume no responsibility for any inaccuracies arising from the conversion of the original to this format.
This text is published under EUR-Lex's own terms of reuse, not a Legalize or public-domain licence.
EUR-Lex
Creative Commons Attribution 4.0 International (CC BY 4.0)
© European Union, https://eur-lex.europa.eu — Source: EUR-Lex (Publications Office of the European Union). Reused under the Creative Commons Attribution 4.0 International (CC BY 4.0) licence. Only EU legislation published in the printed Official Journal of the European Union is deemed authentic; consolidated texts are reproduced here for documentation purposes and have been reformatted to Markdown.