Legalize
← Current text · History

Council Regulation (EU) 2021/2278 of 20 December 2021 suspending the Common Customs Tariff duties referred to in Article 56(2), point (c), of Regulation (EU) No 952/2013 on certain agricultural and industrial products, and repealing Regulation (EU) No 1387/2013

Current text a fecha 2022-07-01

COUNCIL REGULATION (EU) 2021/2278

of 20 December 2021

suspending the Common Customs Tariff duties referred to in Article 56(2), point (c), of Regulation (EU) No 952/2013 on certain agricultural and industrial products, and repealing Regulation (EU) No 1387/2013

Article 1

Article 2

The Commission may review the suspensions for the products listed in the Annex:

(a) on its own initiative; or

(b) at the request of a Member State.

Article 3

Where a customs declaration for release for free circulation is lodged for products for which supplementary units have been provided in the Annex, the exact quantity of the products imported shall be entered in that declaration using the supplementary unit set out in the Annex.

Article 4

Regulation (EU) No 1387/2013 is repealed.

Article 5

This Regulation shall enter into force on the day following that of its publication in the Official Journal of the European Union.

It shall apply from 1 January 2022.

This Regulation shall be binding in its entirety and directly applicable in all Member States.

ANNEX

Serial number CN code TARIC Description Rate of autonomous duty Supplementary unit Date envisaged for mandatory review
0.6748 ex 0709 53 00 10 Fresh or chilled chanterelles for treatment other than simple repacking for retail sale (1) (2) 0 % - 31.12.2025
0.3348 ex 0710 21 00 10 Peas in pods, of the species Pisum sativum of the variety Hortense axiphium, frozen, of a thickness of not more than 6 mm, to be used, in their pods, in the manufacture of prepared meals (1) (2) 0 % - 31.12.2023
0.3349 ex 0710 80 95 50 Bamboo shoots, frozen, not put up for retail sale 0 % - 31.12.2023
0.2829 ex 0711 59 00 11 Mushrooms, excluding mushrooms of the genera Agaricus, Calocybe, Clitocybe, Lepista, Leucoagaricus, Leucopaxillus, Lyophyllum and Tricholoma, provisionally preserved in brine, in sulphur water, or in other preservative solutions, but unsuitable in that state for immediate consumption, for the food-canning industry (1) 0 % - 31.12.2026
0.2463 ex 0712 32 00 ex 0712 33 00 ex 0712 34 00 ex 0712 39 00 10 10 31 31 Mushrooms, excluding mushrooms of the genus Agaricus, dried, whole or in identifiable slices or pieces, for treatment other than simple repacking for retail sale (1) (2) 0 % - 31.12.2023
0.3347 ex 0804 10 00 30 Dates, fresh or dried, for use in the manufacture (excluding packing) of products of drink or food industries (1) 0 % - 31.12.2023
0.2411 0811 90 50 0811 90 70 ex 0811 90 95 70 Fruit of the genus Vaccinium, uncooked or cooked by steaming or boiling in water, frozen, not containing added sugar or other sweetening matter 0 % - 31.12.2023
0.3228 ex 0811 90 95 20 Boysenberries, frozen, not containing added sugar, not put up for retail sale 0 % - 31.12.2023
0.2409 ex 0811 90 95 30 Pineapple (Ananas comosus), in pieces, frozen 0 % - 31.12.2023
0.2408 ex 0811 90 95 40 Rose-hips, uncooked or cooked by steaming or boiling in water, frozen, not containing added sugar or other sweetening matter 0 % - 31.12.2023
0.2864 ex 1511 90 19 ex 1511 90 91 ex 1513 11 10 ex 1513 19 30 ex 1513 21 10 ex 1513 29 30 20 20 20 20 20 20 Palm oil, coconut (copra) oil, palm kernel oil, for the manufacture of: — industrial monocarboxylic fatty acids of subheading 3823 19 10 , — methyl esters of fatty acids of heading 2915 or 2916 , — fatty alcohols of subheadings 2905 17 , 2905 19 and 3823 70 used for the manufacture of cosmetics, washing products or pharmaceutical products, — fatty alcohols of subheading 2905 16 , pure or mixed, used for the manufacture of cosmetics, washing products or pharmaceutical products, — stearic acid of subheading 3823 11 00 , — goods of heading 3401 , or — fatty acids with high purity of heading 2915  (1) 0 % - 31.12.2022
0.6789 ex 1512 19 10 10 Refined safflower oil (CAS RN 8001-23-8) for use in the manufacture of — conjugated linoleic acid of heading 3823 or — ethyl- or methyl esters of linoleic acid of heading 2916  (1) 0 % - 31.12.2022
0.3341 ex 1515 90 99 92 Vegetable oil, refined or semi-refined, containing by weight 35 % or more but not more than 57 % of arachidonic acid or 35 % or more but not more than 50 % of docosahexaenoic acid 0 % - 31.12.2023
0.7686 1516 20 10 Hydrogenated castor oil, so called ‘opal-wax’ 0 % - 31.12.2023
0.4708 ex 1516 20 96 20 Jojoba oil, hydrogenated and interesterified, without any further chemical modification and not subjected to any texturisation process 0 % - 31.12.2024
0.4080 ex 1517 90 99 10 Vegetable oil, refined, containing by weight 25 % or more but not more than 50 % arachidonic acid or 12 % or more but not more than 65 % docosahexaenoic acid and standardized with high oleic sunflower oil (HOSO) 0 % - 31.12.2026
0.6182 ex 1901 90 99 ex 2106 90 98 39 45 Preparation in powder form containing by weight: — 15 % or more but not more than 35 % of wheat derived Maltodextrin, — 15 % or more but not more than 35 % of whey (milk serum), — 10 % or more but not more than 30 % of refined, bleached, deodorised and non-hydrogenated sunflower oil, — 10 % or more but not more than 30 % of blended, aged spray dried cheese, — 5 % or more but not more than 15 % of buttermilk and — 0,1 % or more but not more than 10 % of sodium caseinate, disodium phosphate, lactic acid 0 % - 31.12.2023
0.2423 ex 1902 30 10 ex 1903 00 00 10 20 Transparent noodles, cut in pieces, obtained from beans (Vigna radiata (L.) Wilczek), not put up for retail sale 0 % - 31.12.2023
0.2866 ex 2005 91 00 10 Bamboo shoots, prepared or preserved, in immediate packings of a net content of more than 5 kg 0 % - 31.12.2023
0.5884 ex 2007 99 50 ex 2007 99 50 ex 2007 99 93 83 93 10 Mango puree concentrate, obtained by cooking: — of the Genus Mangifera spp., — with a sugar content by weight of not more than 30 % for use in the manufacture of products of food and drink industry (1) 6 % (3) - 31.12.2022
0.5875 ex 2007 99 50 ex 2007 99 50 84 94 Papaya puree concentrate, obtained by cooking: — of the Genus Carica spp., — with a sugar content by weight of more than 13 % but not more than 30 % for use in the manufacture of products of food and drink industry (1) 7,8 % (3) - 31.12.2022
0.5867 ex 2007 99 50 ex 2007 99 50 85 95 Guava puree concentrate, obtained by cooking: — of the Genus Psidium spp., — with a sugar content by weight of more than 13 % but not more than 30 % for use in the manufacture of products of food and drink industry (1) 6 % (3) - 31.12.2022
0.4716 ex 2008 93 91 20 Sweetened dried cranberries, excluding packing alone as processing, for the manufacture of products of food processing industries (4) 0 % - 31.12.2022
0.5004 ex 2008 99 48 94 Mango puree: — not from concentrate, — of the genus Mangifera, — of a Brix value of 14 or more, but not more than 20, used in the manufacture of products of drink industry (1) 6 % - 31.12.2022
0.4709 ex 2008 99 49 ex 2008 99 99 30 40 Seedless boysenberry puree not containing added spirit, whether or not containing added sugar 0 % - 31.12.2025
0.5587 ex 2008 99 49 ex 2008 99 99 70 11 Blanched vine leaves of the genus Karakishmish, in brine, containing by weight: — more than 6 % of salt concentration, — 0,1 % or more but not more than 1,4 % of acidity expressed as citric acid monohydrate and — whether or not but not more than 2 000 mg/kg of sodium benzoate according CODEX STAN 192-1995 for use in the manufacture of stuffed vine leaves with rice (1) 0 % - 31.12.2022
0.6723 ex 2008 99 91 20 Chinese water chestnuts (Eleocharis dulcis or Eleocharis tuberosa) peeled, washed, blanched, chilled and individually quick-frozen for use in the manufacture of products of food industry for treatment other than simple repacking (1) (2) 0 % (3) - 31.12.2025
0.7767 ex 2008 99 99 35 Frozen pulp from acai berries: — hydrated and pasteurised, — separated from the kernels by the addition of water, — with a Brix value of less than 6, and — with a sugar content of less than 5,6 % 0 % - 31.12.2024
0.4992 ex 2009 41 92 ex 2009 41 99 20 70 Pineapple juice: — not from concentrate, — of the genus Ananas, — of a Brix value of 11 or more but not more than 16, used in the manufacture of products of drink industry (1) 8 % - 31.12.2025
0.4664 ex 2009 49 30 91 Pineapple juice, other than in powder form: — with a Brix value of more than 20 but not more than 67, — a value of more than EUR 30 per 100 kg net weight, — containing added sugar used in the manufacture of products of food or drink industry (1) 0 % - 31.12.2024
0.4623 ex 2009 81 31 10 Cranberry juice concentrate: — of a Brix value of 40 or more but not more than 66, — in immediate packings of a content of 50 litres or more 0 % l 31.12.2024
0.6356 ex 2009 89 73 ex 2009 89 73 11 13 Passion fruit juice and passion fruit juice concentrate, whether or not frozen: — with a Brix value of 13,7 or more but not more than 55, — of a value of more than EUR 30 per 100 kg net weight, — in immediate packings of a content of 50 litres or more, and — with added sugar for the use in the manufacture of products of food or drink industry (1) 0 % l 31.12.2024
0.4159 ex 2009 89 79 20 Frozen boysenberry juice concentrate with a Brix value of 61 or more, but not more than 67, in immediate packings of a content of 50 litres or more 0 % l 31.12.2023
0.6050 ex 2009 89 79 30 Frozen acerola juice concentrate : — with a Brix value of more than 48 but not more than 67, — in immediate packings of a content of 50 litres or more 0 % l 31.12.2023
0.5206 ex 2009 89 79 85 Acai berry juice concentrate: — of the species Euterpe oleracea, — frozen, — not sweetened, — not in powder form, — of a Brix value of 23 or more but not more than 32, in immediate packings of a content of 10 kg or more 0 % - 31.12.2026
0.6365 ex 2009 89 97 ex 2009 89 97 21 29 Passion fruit juice and passion fruit juice concentrate, whether or not frozen: — with a Brix value of 10 or more but not more than 13,7, — of a value of more than EUR 30 per 100 kg net weight, — in immediate packings of a content of 50 litres or more, and — without added sugar for the use in the manufacture of products of food or drink industry (1) 0 % l 31.12.2024
0.4157 ex 2009 89 99 96 Coconut water — unfermented, — not containing added spirit or sugar, and — in immediate packing of a content of 20 litres or more (2) 0 % l 31.12.2026
0.6152 ex 2106 10 20 20 Soya protein concentrate having a protein content by weight, calculated on a dry weight basis, of 65 % or more but not more than 90 % in powder or textured form 0 % - 31.12.2023
0.3340 ex 2106 10 20 30 Preparation on the base of soya protein isolate, containing by weight 6,6 % or more but not more than 8,6 % of calcium phosphate 0 % - 31.12.2023
0.7284 ex 2106 90 92 ex 3504 00 90 50 10 Casein protein hydrolysate consisting of: — by weight 20 % or more but not more than 70 % free amino acids, and — peptones of which by weight more than 90 % having a molecular weight of not more than 2 000  Da 0 % - 31.12.2022
0.7435 ex 2106 90 98 47 Preparation, having a moisture content of 1 % or more but not more than 4 %, and containing by weight: — 15 % or more but not more than 35 % of buttermilk, — 20 % (±10 %) of lactose, — 20 % (±10 %) of whey protein concentrate, — 15 % (±10 %) of cheddar cheese, — 3 % (±2 %) of salt, — 0,1 % or more but not more than 10 % of lactic acid E270, — 0,1 % or more but not more than 10 % of gum arabic E414 for use in the manufacture of products of food and drink industry (1) 0 % - 31.12.2022
0.5246 ex 2519 90 10 10 Fused magnesia with a purity by weight of 94 % or more 0 % - 31.12.2026
0.6330 ex 2707 50 00 ex 2707 99 80 20 10 Mixture of xylenol-isomers and ethyl phenol-isomers, with a total xylenol content by weight of 62 % or more but less than 95 % 0 % - 31.12.2024
0.6168 ex 2707 99 99 10 Heavy and medium oils, whose aromatic content exceeds their non-aromatic content, for use as refinery feedstock to undergo one of the specific processes described in Additional note 5 to Chapter 27 (1) 0 % - 31.12.2023
0.8144 ex 2710 12 25 20 Mixture of C6 aliphatic hydrocarbons (CAS RN 92112-69-1), containing by weight 60 % or more but not more than 80 % of n-hexane (CAS RN 110-54-3), with: — a specific gravity of 0,666 or more but not more than 0,686, — a total of carbonyl compounds of less than 1 ppm, — a total of acetylenic compounds of less than 2 ppm 0 % - 31.12.2025
0.7823 ex 2710 19 81 ex 2710 19 99 30 50 Catalytically hydroisomerized and dewaxed base oil of hydrogenated, highly isoparaffinic hydrocarbons, containing: — 90 % or more by weight of saturates, and — not more than 0,03 % by weight of sulphur, and with — a viscosity index of 80 or more, but less than 120, and — a kinematic viscosity less than 5,0 cSt at 100°C or more than 13,0 cSt at 100°C 0 % - 31.12.2023
0.7822 ex 2710 19 81 ex 2710 19 99 40 60 Catalytically hydroisomerized and dewaxed base oil of hydrogenated, highly isoparaffinic hydrocarbons, containing: — 90 % or more by weight of saturates, and — not more than 0,03 % by weight of sulphur, with a viscosity index of 120 or more 0 % - 31.12.2024
0.6495 ex 2710 19 99 20 Catalytic de-waxed base oil, synthesised from gaseous hydrocarbons, followed by a heavy paraffin conversion process (HPC), containing: — not more than 1 mg/kg of sulphur — more than 99 % by weight of saturated hydrocarbons — more than 75 % by weight of n- and iso-paraffinic hydrocarbons with a carbon chain length of 18 or more but not more than 50; and — a kinematic viscosity at 40 °C of more than 6,5 mm2/s, or — a kinematic viscosity at 40 °C of more than 11 mm2/s with a viscosity index of 120 or more 0 % - 31.12.2024
0.7393 ex 2712 90 99 10 Blend of 1-alkenes containing by weight 90 % or more 1-alkenes of a chain length of 24 carbon atoms or more but not more than 1 % 1-alkenes of a chain length of more than 70 carbon atoms 0 % - 31.12.2022
0.4531 ex 2804 50 90 40 Tellurium (CAS RN 13494-80-9) of a purity by weight of 99,99 % or more, but not more than 99,999 %, based on metallic impurities measured by ICP analysis 0 % - 31.12.2023
0.8021 2804 70 10 Red phosphorus 0 % - 31.12.2022
0.8022 2804 70 90 Phosphorus, other than red phosphorus 0 % - 31.12.2023
0.6658 ex 2805 12 00 10 Calcium with a purity of 98 % or more by weight, in powder or wire form (CAS RN 7440-70-2) 0 % - 31.12.2025
0.5609 ex 2805 19 90 20 Lithium metal (CAS RN 7439-93-2) of a purity by weight of 98,8 % or more 0 % - 31.12.2022
0.2559 ex 2805 30 10 10 Alloy of cerium and other rare-earth metals, containing by weight 47 % or more of cerium 0 % - 31.12.2023
0.497 2805 30 20 2805 30 30 2805 30 40 Rare-earth metals, scandium and yttrium, of a purity by weight of 95 % or more 0 % - 31.12.2025
0.7769 ex 2809 20 00 10 Aqueous solution of phosphoric acid (CAS RN 7664-38-2), containing by weight 85 % or more phosphoric acid 0 % - 31.12.2024
0.2407 ex 2811 22 00 10 Silicon dioxide (CAS RN 7631-86-9) in the form of powder, for use in the manufacture of high performance liquid chromatography columns (HPLC) and sample preparation cartridges (1) 0 % - 31.12.2023
0.6836 ex 2811 22 00 15 Amorphous silicon dioxide (CAS RN 60676-86-0) — in the form of powder — of a purity by weight of 99,0 % or more — with a median grain size of 0,7 μm or more, but not more than 2,1 μm — where 70 % of the particles have a diameter of not more than 3 μm 0 % - 31.12.2022
0.7292 ex 2811 29 90 10 Tellurium dioxide (CAS RN 7446-07-3) 0 % - 31.12.2022
0.3308 ex 2812 90 00 10 Nitrogen trifluoride (CAS RN 7783-54-2) 0 % - 31.12.2023
0.5747 ex 2816 40 00 10 Barium hydroxide (CAS RN 17194-00-2) 0 % - 31.12.2022
0.7594 ex 2818 10 11 10 Sol-Gel corundum (CAS RN 1302-74-5) with an aluminium oxide content of 99,6 % or more by weight, having a micro crystalline structure in the form of rods with an aspect ratio of 1,3 or more, but not more than 6,0 0 % - 31.12.2023
0.5110 ex 2818 10 91 20 Sintered corundum with a micro crystalline structure, consisting of aluminium oxide (CAS RN 1344-28-1), magnesium aluminate (CAS RN 12068-51-8) and the rare earth aluminates of yttrium, lanthanum, and neodymium, with a content by weight (calculated as oxides) of: — 94 % or more, but less than 98,5 % of aluminium oxide, — 2 % (± 1,5 %) of magnesium oxide, — 1 % (± 0,6 %) of yttrium oxide, and — either 2 % (± 1,2 %) of lanthanum oxide, or — 2 % (± 1,2 %) of lanthanum oxide and neodymium oxide, with less than 50 % of the total weight having a particle size of more than 10 mm 0 % - 31.12.2025
0.4640 ex 2818 20 00 10 Activated alumina with a specific surface area of at least 350 m2/g 0 % - 31.12.2024
0.6837 ex 2818 30 00 20 Aluminium hydroxide (CAS RN 21645-51-2) — in the form of powder, — with a purity by weight of 99,5 % or more, — with a decomposition point of 263°C or more, — with a particle size of 4 μm (± 1 μm), — with a Total-Na2O-content by weight of not more than 0,06 % 0 % - 31.12.2025
0.3306 ex 2818 30 00 30 Aluminium hydroxide oxide in the form of boehmite or pseudoboehmite (CAS RN 1318-23-6) 0 % - 31.12.2023
0.5369 ex 2819 90 90 10 Dichromium trioxide (CAS RN 1308-38-9) for use in metallurgy (1) 0 % - 31.12.2026
0.5752 ex 2823 00 00 10 Titanium dioxide (CAS RN 13463-67-7): — of a purity by weight of 99,9 % or more, — with an average grain-size of 0,7 μm or more but not more than 2,1 μm 0 % - 31.12.2022
0.5576 ex 2825 10 00 10 Hydroxylammonium chloride (CAS RN 5470-11-1) 0 % - 31.12.2022
0.7897 ex 2825 20 00 10 Lithium hydroxide monohydrate (CAS RN 1310-66-3) 2,6 % - 31.12.2022
0.3800 2825 30 00 Vanadium oxides and hydroxides 0 % - 31.12.2026
0.3303 ex 2825 50 00 20 Copper (I or II) oxide containing by weight 78 % or more of copper and not more than 0,03 % of chloride 0 % - 31.12.2023
0.6819 ex 2825 50 00 30 Copper (II) oxide (CAS RN 1317-38-0), with a particle size of not more than 100 nm 0 % - 31.12.2025
0.5555 ex 2825 60 00 10 Zirconium dioxide (CAS RN 1314-23-4) 0 % - 31.12.2022
0.6980 ex 2825 70 00 10 Molybdenum trioxide (CAS RN 1313-27-5) 0 % - 31.12.2026
0.7193 ex 2825 70 00 20 Molybdic Acid (CAS RN 7782-91-4) 0 % - 31.12.2026
0.5055 ex 2826 19 90 10 Tungsten hexafluoride (CAS RN 7783-82-6) with a purity by weight of 99,9 % or more 0 % - 31.12.2025
0.8296 ex 2826 90 80 30 Lithium hexafluorophosphate (CAS RN 21324-40-3) with a purity by weight of 99 % or more 2,7 % - 31.12.2022
0.2865 ex 2827 39 85 10 Copper monochloride (CAS RN 7758-89-6) of a purity by weight of 96 % or more but not more than 99 % 0 % - 31.12.2023
0.4180 ex 2827 39 85 20 Antimony pentachloride (CAS RN 7647-18-9) of a purity by weight of 99 % or more 0 % - 31.12.2026
0.6143 ex 2827 39 85 40 Barium chloride dihydrate (CAS RN 10326-27-9) 0 % - 31.12.2023
0.4423 ex 2827 49 90 10 Hydrated zirconium dichloride oxide (CAS RN 7699-43-6) 0 % - 31.12.2023
0.6463 ex 2827 60 00 10 Sodium iodide (CAS RN 7681-82-5) 0 % - 31.12.2024
0.7596 ex 2828 10 00 10 Calcium hypochlorite (CAS RN 7778-54-3) having an active chlorine content of 65 % or more 0 % - 31.12.2023
0.3302 ex 2830 10 00 10 Disodium tetrasulphide (CAS RN 12034-39-8), containing by weight 38 % or less of sodium calculated on the dry weight 0 % - 31.12.2023
0.3859 ex 2833 29 80 20 Manganese sulphate monohydrate (CAS RN 10034-96-5) 0 % - 31.12.2023
0.5090 ex 2833 29 80 30 Zirconium sulphate (CAS RN 14644-61-2) 0 % - 31.12.2022
0.4338 ex 2835 10 00 10 Sodium hypophosphite monohydrate (CAS RN 10039-56-2) 0 % - 31.12.2022
0.6144 ex 2835 10 00 20 Sodium hypophosphite (CAS RN 7681-53-0) 0 % - 31.12.2023
0.7452 ex 2835 10 00 30 Aluminium Phosphinate (CAS RN 7784-22-7) 0 % - 31.12.2023
0.2524 ex 2836 91 00 20 Lithium carbonate, containing one or more of the following impurities at the concentrations indicated: — 2 mg/kg or more of arsenic, — 200 mg/kg or more of calcium, — 200 mg/kg or more of chlorides, — 20 mg/kg or more of iron, — 150 mg/kg or more of magnesium, — 20 mg/kg or more of heavy metals, — 300 mg/kg or more of potassium, — 300 mg/kg or more of sodium, — 200 mg/kg or more of sulphates, determined according to the methods specified in the European Pharmacopœia 0 % - 31.12.2023
0.2863 ex 2836 99 17 30 Zirconium (IV) basic carbonate (CAS RN 57219-64-4 or 37356-18-6) with a purity by weight of 96 % or more 0 % - 31.12.2023
0.3300 ex 2837 19 00 20 Copper cyanide (CAS RN 544-92-3) 0 % - 31.12.2023
0.4078 ex 2837 20 00 10 Tetrasodium hexacyanoferrate (II) (CAS RN 13601-19-9) 0 % - 31.12.2026
0.4339 ex 2839 19 00 10 Disodium disilicate (CAS RN 13870-28-5) 0 % - 31.12.2022
0.2861 ex 2839 90 00 20 Calcium silicate (CAS RN 1344-95-2) 0 % - 31.12.2023
0.6632 ex 2840 20 90 10 Zinc borate (CAS RN 12767-90-7) 0 % - 31.12.2025
0.7288 ex 2841 50 00 11 Potassium dichromate (CAS RN 7778-50-9) with a purity by weight of 99 % or more, for use as intermediate for the production of chrome (1) 2 % - 31.12.2025
0.6142 ex 2841 70 00 10 Diammonium tetraoxomolybdate(2-) (CAS RN 13106-76-8) 0 % - 31.12.2023
0.6482 ex 2841 70 00 30 Hexaammonium heptamolybdate, anhydrous (CAS RN 12027-67-7) or as tetrahydrate (CAS RN 12054-85-2) 0 % - 31.12.2024
0.6981 ex 2841 70 00 40 Diammonium dimolybdate (CAS RN 27546-07-2) 0 % - 31.12.2026
0.4323 ex 2841 80 00 10 Diammonium wolframate (ammonium paratungstate) (CAS RN 11120-25-5) 0 % - 31.12.2022
0.7301 ex 2841 90 30 10 Potassium metavanadate (CAS RN 13769-43-2) 0 % - 31.12.2022
0.4222 ex 2841 90 85 10 Lithium cobalt(III) oxide (CAS RN 12190-79-3) with a cobalt content of at least 59 % 2,7 % - 31.12.2022
0.5936 ex 2841 90 85 20 Potassium titanium oxide (CAS RN 12056-51-8) in powder form with a purity of 99 % or more 0 % - 31.12.2023
0.4416 ex 2842 10 00 10 Synthetic beta zeolite powder 0 % - 31.12.2023
0.4588 ex 2842 10 00 20 Synthetic chabasite zeolite powder 0 % - 31.12.2024
0.7397 ex 2842 10 00 50 Fluorphlogopite (CAS RN 12003-38-2) 0 % - 31.12.2022
0.7097 ex 2842 10 00 60 Aluminosilicate (CAS RN 1318-02-1) with — a purity by weight of 94 % or more, — a zeolite structure of aluminophosphate-eighteen (AEI), and — a phase purity of 90 % or more for use in the manufacture of copper zeolite (1) 0 % - 31.12.2026
0.4642 ex 2842 90 10 10 Sodium selenate (CAS RN 13410-01-0) 0 % - 31.12.2024
0.7400 ex 2842 90 80 30 Aluminum trititanium dodecachloride (CAS RN 12003-13-3) 0 % - 31.12.2022
0.3295 2845 10 00 Heavy water (deuterium oxide) (Euratom) (CAS RN 7789-20-0) 0 % - 31.12.2023
0.4189 2845 40 00 Helium-3 (CAS RN 14762-55-1) 0 % - 31.12.2026
0.3297 2845 90 10 Deuterium and compounds thereof; hydrogen and compounds thereof, enriched in deuterium; mixtures and solutions containing these products (Euratom) 0 % - 31.12.2023
0.8237 ex 2845 90 10 10 4-(Tert-Butyl)-2-(2-(methyl-d3)propan-2-yl-1,1,1,3,3,3-d6)phenol (CAS RN 2342594-40-3) with a purity by weight of 98 % or more 0 % - 31.12.2026
0.4191 ex 2845 90 90 20 Water enriched at a level of 95 % or more by weight with oxygen-18 (CAS RN 14314-42-2) 0 % - 31.12.2023
0.4190 ex 2845 90 90 30 (13C)Carbon monoxide (CAS RN 1641-69-6) 0 % - 31.12.2026
0.2859 ex 2846 10 00 ex 3824 99 96 10 53 Rare-earth concentrate containing by weight 60 % or more but not more than 95 % of rare-earth oxides and not more than 1 % each of zirconium oxide, aluminium oxide or iron oxide, and having a loss on ignition of 5 % or more by weight 0 % - 31.12.2023
0.3296 ex 2846 10 00 20 Dicerium tricarbonate (CAS RN 537-01-9), whether or not hydrated 0 % - 31.12.2023
0.3420 ex 2846 10 00 30 Cerium lanthanum carbonate, whether or not hydrated 0 % - 31.12.2023
0.3227 2846 90 10 2846 90 20 2846 90 30 2846 90 90 Compounds, inorganic or organic, of rare-earth metals, of yttrium or of scandium or of mixtures of these metals, other than those of subheading 2846 10 00 0 % - 31.12.2023
0.3418 ex 2850 00 20 10 Silane (CAS RN 7803-62-5) 0 % - 31.12.2023
0.4332 ex 2850 00 20 30 Titanium nitride (CAS RN 25583-20-4) with a particle size of not more than 250 nm 0 % - 31.12.2022
0.5497 ex 2850 00 20 40 Germanium tetrahydride (CAS RN 7782-65-2) 0 % - 31.12.2026
0.7302 ex 2850 00 20 60 Disilane (CAS RN 1590-87-0) 0 % - 31.12.2022
0.7555 ex 2850 00 20 70 Cubic Boron nitride (CAS RN 10043-11-5) 0 % - 31.12.2023
0.3419 ex 2850 00 20 80 Arsine (CAS RN 7784-42-1) with a purity by volume of 99,999 % or more 0 % - 31.12.2024
0.4492 ex 2850 00 60 10 Sodium azide (CAS RN 26628-22-8) 0 % - 31.12.2023
0.3421 ex 2853 90 90 20 Phosphine (CAS RN 7803-51-2) 0 % - 31.12.2023
0.8282 ex 2903 19 00 20 1,3-Dichloropropane (CAS RN 142-28-9) with a purity by weight of 99 % or more 0 % - 31.12.2026
0.6633 2903 42 00 Difluoromethane (CAS RN 75-10-5) 0 % - 31.12.2025
0.6007 ex 2903 44 00 10 Pentafluoroethane (CAS RN 354-33-6) 0 % - 31.12.2024
0.3674 ex 2903 45 00 30 1,1,1,2-Tetrafluoroethane (CAS RN 811-97-2) conforming to the following specifications: — not more than 600 ppm by weight of HFC-134 (1,1,2,2-tetrafluoroethane), — not more than 5 ppm by weight of HFC-143a (1,1,1-trifluoroethane), — not more than 2 ppm by weight of HFC-125 (pentafluoroethane), — not more than 100 ppm by weight of HCFC-124 (1-chloro-1,2,2,2- tetrafluoroethane), — not more than 30 ppm by weight of CFC-114 (1,2-dichlorotetrafluoroethane), — not more than 50 ppm by weight of CFC-114a (1,1-dichlorotetrafluoroethane), — not more than 250 ppm by weight of HCFC-133a (1-chloro-2,2,2-trifluoroethane), — not more than 2 ppm by weight of HCFC-22 (chlorodifluoromethane), — not more than 2 ppm by weight of CFC-115 (chloropentafluoroethane), — not more than 2 ppm by weight of CFC-12 (dichlorodifluoromethane), 0 % - 31.12.2024
— not more than 20 ppm by weight of HCC-40 (methyl chloride), — not more than 20 ppm by weight of HFC-245cb (1,1,1,2,2-pentafluoropropane), — not more than 20 ppm by weight of H-12B1 (chlorodifluorobromomethane), — not more than 20 ppm by weight of HFC-32 (difluoromethane), — not more than 15 ppm by weight of HCFC-31 (chlorofluoromethane), — not more than 10 ppm by weight of HFC-152a (1,1-difluoroethane), — not more than 20 ppm by weight of HFO-1131 (1-chloro-2-fluoroethylene), — not more than 20 ppm by weight of HCFO-1122 (1-chloro-2,2-difluoroethylene), — not more than 3 ppm by weight of HFO-1234yf (2,3,3,3-tetrafluoropropene), — not more than 3 ppm by weight of HFO-1243zf (3,3,3-trifluoropropene), — not more than 3 ppm by weight of HCFO-1122a (1-chloro-1,2-difluoroethylene), — not more than 4,5 ppm by weight of HFO-1234yf + HCFO-1122a + HFO-1243zf (2,3,3,3-tetrafluoropropene + 1-chloro-1,2-difluoroethylene + 3,3,3-trifluoropropene),
— not more than 3 ppm by weight of any individual unspecified/unknown chemical, — not more than 10 ppm by weight of all unspecified/unknown chemicals combined, — not more than 10 ppm by weight of water, — with an acidity level of not more than 0,1 ppm by weight, — without halides, — not more than 0,01 % by volume of high boilers, — without any odour (no malodour), for use with or without further purification as an under GMP (Good Manufacturing Practice) produced inhalation grade of HFC-134a in the manufacture of a propellant for medical aerosols whose contents are absorbed in the oral or nasal cavities, and/or the respiratory tract (1)
0.2542 ex 2903 47 00 20 1,1,1,3,3-Pentafluoropropane (HFC-245fa) (CAS RN 460-73-1) 0 % - 31.12.2023
0.6077 ex 2903 49 30 30 1H-Perfluorohexane (CAS RN 355-37-3) 0 % - 31.12.2023
0.2854 ex 2903 49 30 10 Carbon tetrafluoride (tetrafluoromethane) (CAS RN 75-73-0) 0 % - 31.12.2023
0.2852 ex 2903 49 30 20 Perfluoroethane (CAS RN 76-16-4) 0 % - 31.12.2023
0.5803 ex 2903 51 00 10 2,3,3,3-Tetrafluoroprop-1-ene (2,3,3,3-tetrafluoropropene) (CAS RN 754-12-1) 0 % - 31.12.2022
0.4517 ex 2903 51 00 20 Trans-1,3,3,3-tetrafluoroprop-1-ene (Trans-1,3,3,3-tetrafluoropropene) (CAS RN 29118-24-9) 0 % - 31.12.2023
0.6076 ex 2903 59 00 20 (Perfluorobutyl) ethylene (CAS RN 19430-93-4) 0 % - 31.12.2023
0.4066 ex 2903 59 00 30 Hexafluoropropene (CAS RN 116-15-4) 0 % - 31.12.2026
0.7324 ex 2903 59 00 40 1,1,2,3,4,4-hexafluorobuta-1,3-diene (CAS RN 685-63-2) 0 % - 31.12.2022
0.8151 ex 2903 69 19 60 1-Bromo-2-methylpropane (CAS RN 78-77-3) with a purity by weight of 99 % or more 0 % - 31.12.2026
0.7289 ex 2903 69 19 20 5-Bromopent-1-ene (CAS RN 1119-51-3) 0 % - 31.12.2022
0.7974 ex 2903 69 19 40 3-(Bromomethyl)pentane (CAS RN 3814-34-4) with a purity by weight of 99 % or more 0 % - 31.12.2025
0.7895 ex 2903 72 00 10 Dichloro-1,1,1-trifluoroethane (CAS RN 306-83-2) with a purity by weight of 99 % or more 0 % - 31.12.2024
0.3675 ex 2903 77 60 10 1,1,1-Trichlorotrifluoroethane (CAS RN 354-58-5) 0 % - 31.12.2023
0.5212 ex 2903 77 90 10 Chlorotrifluoroethylene (CAS RN 79-38-9) 0 % - 31.12.2026
0.7513 ex 2903 78 00 10 Octafluoro-1,4-diiodobutane (CAS RN 375-50-8) 0 % - 31.12.2023
0.7755 ex 2903 78 00 20 Trifluoroiodomethane (CAS RN 2314-97-8) 0 % - 31.12.2024
0.6485 ex 2903 79 30 10 Trans-1-chloro-3,3,3-trifluoropropene (CAS RN 102687-65-0) 0 % - 31.12.2024
0.7826 ex 2903 79 30 30 1-Bromo-5-chloropentane (CAS RN 54512-75-3) with a purity by weight of 99 % or more 0 % - 31.12.2024
0.5765 ex 2903 89 80 50 Chlorocyclopentane (CAS RN 930-28-9) 0 % - 31.12.2022
0.7304 ex 2903 89 80 60 Octafluorocyclobutane (CAS RN 115-25-3) 0 % - 31.12.2022
0.6611 ex 2903 99 80 15 4-Bromo-2-chloro-1-fluorobenzene (CAS RN 60811-21-4) 0 % - 31.12.2025
0.3410 ex 2903 99 80 20 1,2-Bis(pentabromophenyl)ethane (CAS RN 84852-53-9) 0 % - 31.12.2023
0.8017 ex 2903 99 80 25 2,2'-Dibromobiphenyl (CAS RN 13029-09-9) with a purity by weight of 95 % or more 0 % - 31.12.2025
0.8018 ex 2903 99 80 35 2-Bromo-9,9'-spirobi[9H-fluoren] (CAS RN 171408-76-7) with a purity by weight of 95 % or more 0 % - 31.12.2025
0.3411 ex 2903 99 80 40 2,6-Dichlorotoluene (CAS RN 118-69-4), of a purity by weight of 99 % or more and containing: — 0,001 mg/kg or less of tetrachlorodibenzodioxines, — 0,001 mg/kg or less of tetrachlorodibenzofurans, — 0,2 mg/kg or less of tetrachlorobiphenyls 0 % - 31.12.2023
0.8076 ex 2903 99 80 45 1-Bromo-4-(trans-4-propylcyclohexyl)benzene (CAS RN 86579-53-5) with a purity by weight of 95 % or more 0 % - 31.12.2025
0.4529 ex 2903 99 80 50 Fluorobenzene (CAS RN 462-06-6) 0 % - 31.12.2023
0.8101 ex 2903 99 80 55 1-Bromo-4-(trans-4-ethylcyclohexyl)benzene (CAS RN 91538-82-8) with a purity by weight of 95 % or more 0 % - 31.12.2025
0.7351 ex 2903 99 80 60 1,1'-methanediylbis(4-fluorobenzene) (CAS RN 457-68-1) 0 % - 31.12.2022
0.8166 ex 2903 99 80 65 2,6-Difluorobenzyl bromide (CAS RN 85118-00-9) with a purity by weight of 97 % or more 0 % - 31.12.2026
0.8177 ex 2903 99 80 70 1-[Chloro(phenyl)methyl]-2-methylbenzene (CAS RN 41870-52-4) with a purity by weight of 99 % or more 0 % - 31.12.2026
0.6235 ex 2903 99 80 75 3-Chloro-alpha,alpha,alpha-trifluorotoluene (CAS RN 98-15-7) 0 % - 31.12.2024
0.5917 ex 2903 99 80 80 1-Bromo-3,4,5-trifluorobenzene (CAS RN 138526-69-9) 0 % - 31.12.2023
0.3407 ex 2904 10 00 30 Sodium p-styrenesulphonate (CAS RN 2695-37-6) 0 % - 31.12.2024
0.4686 ex 2904 10 00 50 Sodium 2-methylprop-2-ene-1-sulphonate (CAS RN 1561-92-8) 0 % - 31.12.2024
0.3409 ex 2904 20 00 10 Nitromethane (CAS RN 75-52-5) 0 % - 31.12.2025
0.3391 ex 2904 20 00 20 Nitroethane (CAS RN 79-24-3) 0 % - 31.12.2022
0.3408 ex 2904 20 00 30 1-Nitropropane (CAS RN 108-03-2) 0 % - 31.12.2025
0.3390 ex 2904 20 00 40 2-Nitropropane (CAS RN 79-46-9) 0 % - 31.12.2024
0.2526 ex 2904 99 00 20 1-Chloro-2,4-dinitrobenzene (CAS RN 97-00-7) 0 % - 31.12.2024
0.6612 ex 2904 99 00 25 Difluoromethanesulphonyl chloride (CAS RN 1512-30-7) 0 % - 31.12.2025
0.3388 ex 2904 99 00 30 Tosyl chloride (CAS RN 98-59-9) 0 % - 31.12.2024
0.6613 ex 2904 99 00 35 1-Fluoro-4-nitrobenzene (CAS RN 350-46-9) 0 % - 31.12.2025
0.5745 ex 2904 99 00 40 4-Chlorobenzenesulphonyl chloride (CAS RN 98-60-2) 0 % - 31.12.2022
0.7507 ex 2904 99 00 45 2-Nitrobenzenesulfonyl Chloride (CAS RN 1694-92-4) 0 % - 31.12.2023
0.6001 ex 2904 99 00 50 Ethanesulphonyl chloride (CAS RN 594-44-5) 0 % - 31.12.2023
0.7957 ex 2904 99 00 55 2,4-dichloro-1,3-dinitro-5-(trifluoromethyl)benzene (CAS RN 29091-09-6) with a purity by weight of 96 % or more 0 % - 31.12.2025
0.6407 ex 2904 99 00 60 4,4'-Dinitrostilbene-2,2'-disulfonic acid (CAS RN 128-42-7) 0 % - 31.12.2024
0.8160 ex 2904 99 00 65 4-Nitrotoluene-2-sulphonic acid (CAS RN 121-03-9) in powder form, with a purity by weight of 80 % or more and a content of water by weight of 15 % or more 0 % - 31.12.2026
0.6270 ex 2904 99 00 70 1-Chloro-4-nitrobenzene (CAS RN 100-00-5) 0 % - 31.12.2024
0.6560 ex 2904 99 00 80 1-Chloro-2-nitrobenzene (CAS RN 88-73-3) 0 % - 31.12.2024
0.6186 ex 2905 11 00 10 Methanol (CAS RN 67-56-1) with a purity of 99,85 % by weight or more 0 % - 31.12.2023
0.2967 ex 2905 19 00 11 Potassium tert-butanolate (CAS RN 865-47-4), whether or not in the form of a solution in tetrahydrofuran according to note 1e) to Chapter 29 of the CN 0 % - 31.12.2023
0.6118 ex 2905 19 00 20 Butyltitanate monohydrate, homopolymer (CAS RN 162303-51-7) 0 % - 31.12.2023
0.6119 ex 2905 19 00 25 Tetra-(2-ethylhexyl) titanate (CAS RN 1070-10-6) 0 % - 31.12.2023
0.3384 ex 2905 19 00 30 2,6-Dimethylheptan-4-ol (CAS RN 108-82-7) 0 % - 31.12.2023
0.4793 ex 2905 19 00 40 2,6-Dimethylheptan-2-ol (CAS RN 13254-34-7) 0 % - 31.12.2024
0.5534 ex 2905 19 00 70 Titanium tetrabutanolate (CAS RN 5593-70-4) 0 % - 31.12.2022
0.5533 ex 2905 19 00 80 Titanium tetraisopropoxide (CAS RN 546-68-9) 0 % - 31.12.2022
0.6002 ex 2905 19 00 85 Titanium tetraethanolate (CAS RN 3087-36-3) 0 % - 31.12.2023
0.6464 ex 2905 22 00 10 Linalool (CAS RN 78-70-6) containing by weight 90,7 % or more of (3R)-(-)-Linalool (CAS RN 126-91-0) 0 % - 31.12.2024
0.7114 ex 2905 22 00 20 3,7-Dimethyloct-6-en-1-ol (CAS RN 106-22-9) 0 % - 31.12.2026
0.7388 ex 2905 29 90 10 Cis-hex-3-en-1-ol (CAS RN 928-96-1) 0 % - 31.12.2022
0.7674 ex 2905 32 00 20 (2S)-propane-1,2-diol (CAS RN 4254-15-3) with a purity by weight of 98 % or more 0 % - 31.12.2023
—————
0.5249 ex 2905 39 95 20 Butane-1,2-diol (CAS RN 584-03-2) 0 % - 31.12.2022
0.5255 ex 2905 39 95 30 2,4,7,9-Tetramethyl-4,7-decanediol (CAS RN 17913-76-7) 0 % - 31.12.2026
0.5847 ex 2905 39 95 40 Decane-1,10-diol (CAS RN 112-47-0) 0 % - 31.12.2022
0.5908 ex 2905 39 95 50 2-Methyl-2-propylpropane-1,3-diol (CAS RN 78-26-2) 0 % - 31.12.2023
0.7701 ex 2905 39 95 60 Dodecane-1,12-diol (CAS RN 5675-51-4) 0 % - 31.12.2024
0.7914 ex 2905 39 95 70 2-methylpropane-1,3-diol (CAS RN 2163-42-0) with a purity by weight of 98 % or more 0 % - 31.12.2024
0.4624 ex 2905 59 98 20 2,2,2-Trifluoroethanol (CAS RN 75-89-8) 0 % - 31.12.2024
0.3378 ex 2906 19 00 10 Cyclohex-1,4-ylenedimethanol (CAS RN 105-08-8) 0 % - 31.12.2023
0.3380 ex 2906 19 00 20 4,4'-Isopropylidenedicyclohexanol (CAS RN 80-04-6) 0 % - 31.12.2023
0.6257 ex 2906 19 00 50 4-tert-Butylcyclohexanol (CAS RN 98-52-2) 0 % - 31.12.2024
0.8231 ex 2906 19 00 60 5-Methyl-2-(prop-1-en-2-yl)cyclohexanol, mixture of isomers (CAS RN 7786-67-6) with a purity by weight of 90 % or more 0 % - 31.12.2026
0.3681 ex 2906 29 00 20 1-Hydroxymethyl-4-methyl-2,3,5,6-tetrafluorobenzene (CAS RN 79538-03-7) 0 % - 31.12.2023
0.5855 ex 2906 29 00 30 2-Phenylethanol (CAS RN 60-12-8) 0 % - 31.12.2022
0.6757 ex 2906 29 00 40 2-Bromo-5-iodo-benzenemethanol (CAS RN 946525-30-0) 0 % - 31.12.2022
0.7373 ex 2906 29 00 50 2,2'-(m-phenylene)dipropan-2-ol (CAS RN 1999-85-5) 0 % - 31.12.2022
0.7806 ex 2906 29 00 60 3-[3-(Trifluoromethyl)phenyl]propan-1-ol (CAS RN 78573-45-2) 0 % - 31.12.2024
0.7963 ex 2906 29 00 70 1,2,3,4-Tetrahydro-1-naphthol (CAS RN 529-33-9) with a purity by weight of 95 % or more 0 % - 31.12.2025
0.6329 ex 2907 12 00 20 Mixture of meta-cresol (CAS RN 108-39-4) and para-cresol (CAS RN 106-44-5) with a purity by weight of 99 % or more 0 % - 31.12.2024
0.6559 ex 2907 12 00 30 p-Cresol (CAS RN 106-44-5) 0 % - 31.12.2024
0.5216 ex 2907 15 90 10 2-Naphthol (CAS RN 135-19-3) 0 % - 31.12.2026
0.6256 ex 2907 19 10 10 2,6-Xylenol (CAS RN 576-26-1) 0 % - 31.12.2024
0.4480 ex 2907 19 90 20 Biphenyl-4-ol (CAS RN 92-69-3) 0 % - 31.12.2023
0.7753 ex 2907 19 90 30 2-methyl-5-(propan-2-yl)phenol (CAS RN 499-75-2) 0 % - 31.12.2024
0.3372 ex 2907 21 00 10 Resorcinol (CAS RN 108-46-3) 0 % - 31.12.2023
0.6026 ex 2907 29 00 15 6,6'-Di-tert-butyl-4,4'-butylidenedi-m-cresol (CAS RN 85-60-9) 0 % - 31.12.2023
0.3369 ex 2907 29 00 20 4,4'-(3,3,5-Trimethylcyclohexylidene)diphenol (CAS RN 129188-99-4) 0 % - 31.12.2023
0.6454 ex 2907 29 00 25 4-Hydroxybenzyl alcohol (CAS RN 623-05-2) 0 % - 31.12.2024
0.3367 ex 2907 29 00 30 4,4',4"-Ethylidynetriphenol (CAS RN 27955-94-8) 0 % - 31.12.2023
0.5432 ex 2907 29 00 45 2-Methylhydroquinone (CAS RN 95-71-6) 0 % - 31.12.2026
0.3368 ex 2907 29 00 50 6,6',6"-Tricyclohexyl-4,4',4"-butane-1,1,3-triyltri(m-cresol) (CAS RN 111850-25-0) 0 % - 31.12.2023
0.6558 ex 2907 29 00 65 2,2'-Methylenebis(6-cyclohexyl-p-cresol) (CAS RN 4066-02-8) 0 % - 31.12.2024
0.2584 ex 2907 29 00 70 2,2',2",6,6',6"-Hexa-tert-butyl-α,α',α"-(mesitylene-2,4,6-triyl)tri-p-cresol (CAS RN 1709-70-2) 0 % - 31.12.2023
0.7402 ex 2907 29 00 75 Biphenyl-4,4'-diol (CAS RN 92-88-6) 0 % - 31.12.2023
0.3848 ex 2907 29 00 85 Phloroglucinol whether or not hydrated 0 % - 31.12.2023
0.5903 ex 2908 19 00 10 Pentafluorophenol (CAS RN 771-61-9) 0 % - 31.12.2023
0.5914 ex 2908 19 00 20 4,4'-(Perfluoroisopropylidene)diphenol (CAS RN 1478-61-1) 0 % - 31.12.2023
0.6260 ex 2908 19 00 30 4-Chlorophenol (CAS RN 106-48-9) 0 % - 31.12.2024
0.6782 ex 2908 19 00 40 3,4,5-Trifluorophenol (CAS RN 99627-05-1) 0 % - 31.12.2025
0.6915 ex 2908 19 00 50 4-Fluorophenol (CAS RN 371-41-5) 0 % - 31.12.2025
0.7720 ex 2908 19 00 60 2,2',6,6'-tetrabromo-4,4'-isopropylidenediphenol (CAS RN 79-94-7) 0 % - 31.12.2024
0.8204 ex 2908 19 00 70 2,3,6-Trifluorophenol (CAS RN 113798-74-6) with a purity by weight of 98 % or more 0 % - 31.12.2026
0.3361 ex 2909 19 90 20 Bis(2-chloroethyl) ether (CAS RN 111-44-4) 0 % - 31.12.2023
0.3359 ex 2909 19 90 30 Mixture of isomers of nonafluorobutyl methyl ether or nonafluorobutyl ethyl ether, of a purity by weight of 99 % or more 0 % - 31.12.2023
0.4035 ex 2909 19 90 50 3-Ethoxy-perfluoro-2-methylhexane (CAS RN 297730-93-9) 0 % - 31.12.2026
0.5407 ex 2909 20 00 10 8-Methoxycedrane (CAS RN 19870-74-7) 0 % - 31.12.2026
0.5503 ex 2909 30 38 20 1,1'-Propane-2,2-diylbis[3,5-dibromo-4-(2,3-dibromopropoxy)benzene] (CAS RN 21850-44-2) 0 % - 31.12.2026
0.6649 ex 2909 30 38 30 1,1'-(1-Methylethylidene)bis[3,5-dibromo-4-(2,3-dibromo-2-methylpropoxy)]-benzene (CAS RN 97416-84-7) 0 % - 31.12.2025
0.7454 ex 2909 30 38 40 4-Benzyloxybromobenzene (CAS RN 6793-92-6) 0 % - 31.12.2023
0.7828 ex 2909 30 38 50 2-(1-Adamantyl)-4-Bromoanisole (CAS RN 104224-63-7) with a purity by weight of 99 % or more 0 % - 31.12.2024
0.4710 ex 2909 30 90 10 2-(Phenylmethoxy)naphthalene (CAS RN 613-62-7) 0 % - 31.12.2024
0.7176 ex 2909 30 90 15 {[(2,2-dimethylbut-3-yn-1-yl)oxy]methyl}benzene (CAS RN 1092536-54-3) 0 % - 31.12.2026
0.4711 ex 2909 30 90 20 1,2-Bis(3-methyl-phenoxy)ethane (CAS RN 54914-85-1) 0 % - 31.12.2024
0.7115 ex 2909 30 90 25 1,2-Diphenoxyethane (CAS RN 104-66-5) in the form of powder or as an aqueous dispersion containing by weight 30 % or more but not more than 60 % of 1,2-diphenoxyethane 0 % - 31.12.2026
0.5117 ex 2909 30 90 30 3,4,5-Trimethoxytoluene (CAS RN 6443-69-2) 0 % - 31.12.2025
0.7580 ex 2909 30 90 35 1-Chloro-2-(4-ethoxybenzyl)-4-iodobenzene (CAS RN 1103738-29-9) 0 % - 31.12.2023
0.6614 ex 2909 30 90 40 1-Chloro-2,5-dimethoxybenzene (CAS RN 2100-42-7) 0 % - 31.12.2025
0.8167 ex 2909 30 90 45 5-Bromo-1,3-difluoro-2-(trifluoromethoxy)benzene (CAS RN 115467-07-7) with a purity by weight of 95 % or more 0 % - 31.12.2026
0.6783 ex 2909 30 90 50 1-Ethoxy-2,3-difluorobenzene (CAS RN 121219-07-6) 0 % - 31.12.2025
0.6784 ex 2909 30 90 60 1-Butoxy-2,3-difluorobenzene (CAS RN 136239-66-2) 0 % - 31.12.2025
0.6994 ex 2909 30 90 70 O,O,O-1,3,5-trimethylresorcinol (CAS RN 621-23-8) 0 % - 31.12.2026
0.7079 ex 2909 30 90 80 Oxyfluorfen (ISO) (CAS RN 42874-03-3) with a purity by weight of 97 % or more 0 % - 31.12.2022
0.7706 ex 2909 44 00 10 2-Propoxyethanol (CAS RN 2807-30-9) 0 % - 31.12.2024
0.6927 ex 2909 49 80 10 1-Propoxypropan-2-ol (CAS RN 1569-01-3) 0 % - 31.12.2026
0.8241 ex 2909 49 80 30 3,4-Dimethoxybenzyl alcohol (CAS RN 93-03-8) with a purity by weight of 98 % or more 0 % - 31.12.2026
0.3484 ex 2909 50 00 10 4-(2-Methoxyethyl)phenol (CAS RN 56718-71-9) 0 % - 31.12.2023
0.7846 ex 2909 50 00 40 2-methoxy-4-(trifluoromethoxy)phenol (CAS RN 166312-49-8) with a purity by weight of 98 % or more 0 % - 31.12.2024
0.3682 ex 2909 60 90 10 Bis(α,α-dimethylbenzyl) peroxide (CAS RN 80-43-3) 0 % - 31.12.2023
0.6489 ex 2909 60 90 30 3,6,9-Triethyl-3,6,9-trimethyl-1,4,7-triperoxonane (CAS RN 24748-23-0), dissolved in isoparaffinic hydrocarbons 0 % - 31.12.2024
0.7910 ex 2909 60 90 50 Solution of 3,6,9-(ethyl and/or propyl)-3,6,9-trimethyl-1,2,4,5,7,8-hexoxonanes (CAS RN 1613243-54-1) in mineral spirits (CAS RN 1174522-09-8), containing by weight 25 % or more, but not more than 41 % of the hexoxonanes 0 % - 31.12.2024
0.7744 ex 2910 90 00 10 2-[(2-Methoxyphenoxy)methyl]oxirane (CAS RN 2210-74-4) 0 % - 31.12.2024
0.5940 ex 2910 90 00 15 1,2-Epoxycyclohexane (CAS RN 286-20-4) 0 % - 31.12.2023
0.7672 ex 2910 90 00 25 Phenyloxirane (CAS RN 96-09-3) 0 % - 31.12.2023
0.2649 ex 2910 90 00 30 2,3-Epoxypropan-1-ol (glycidol) (CAS RN 556-52-5) 0 % - 31.12.2023
0.8042 ex 2910 90 00 40 [(2R)-Oxiran-2-yl]methyl 3-nitrobenzenesulphonate (CAS RN 115314-17-5) with a purity by weight of 97 % or more 0 % - 31.12.2025
0.6660 ex 2910 90 00 50 2,3-Epoxypropyl phenyl ether (CAS RN 122-60-1) 0 % - 31.12.2025
0.4361 ex 2910 90 00 80 Allyl glycidyl ether (CAS RN 106-92-3) 0 % - 31.12.2026
0.7116 ex 2912 19 00 10 Undecanal (CAS RN 112-44-7) 0 % - 31.12.2026
0.8073 ex 2912 19 00 20 Acrylaldehyde (CAS RN 107-02-8) with a purity by weight of 98 % or more 0 % - 31.12.2025
0.6968 ex 2912 29 00 15 2,6,6-Trimethylcyclohexenecarbaldehyde (alpha-beta isomers mixture) (CAS RN 52844-21-0) 0 % - 31.12.2026
0.7314 ex 2912 29 00 35 Cinnamaldehyde (CAS RN 104-55-2) 0 % - 31.12.2022
0.7405 ex 2912 29 00 45 p-Phenylbenzaldehyde (CAS RN 3218-36-8) 0 % - 31.12.2022
0.5755 ex 2912 29 00 50 4-Isobutylbenzaldehyde (CAS RN 40150-98-9) 0 % - 31.12.2023
0.7612 ex 2912 29 00 55 Cyclohex-3-ene-1-carbaldehyde (CAS RN 100-50-5) 0 % - 31.12.2023
0.6072 ex 2912 29 00 70 4-tert-Butylbenzaldehyde (CAS RN 939-97-9) 0 % - 31.12.2023
0.6073 ex 2912 29 00 80 4-Isopropylbenzaldehyde (CAS RN 122-03-2) 0 % - 31.12.2023
0.8147 2912 42 00 Ethylvanillin (3-ethoxy-4-hydroxybenzaldehyde) 0 % - 31.12.2025
0.3479 ex 2912 49 00 10 3-Phenoxybenzaldehyde (CAS RN 39515-51-0) 0 % - 31.12.2023
0.5732 ex 2912 49 00 20 4-Hydroxybenzaldehyde (CAS RN 123-08-0) 0 % - 31.12.2022
0.5135 ex 2912 49 00 30 Salicylaldehyde (CAS RN 90-02-8) 0 % - 31.12.2025
0.6678 ex 2912 49 00 40 3-Hydroxy-p-anisaldehyde (CAS RN 621-59-0) 0 % - 31.12.2025
0.7353 ex 2912 49 00 50 2,6-dihydroxybenzaldehyde (CAS RN 387-46-2) 0 % - 31.12.2022
0.7712 ex 2913 00 00 10 2-Nitrobenzaldehyde (CAS RN 552-89-6) 0 % - 31.12.2024
0.4228 ex 2914 19 90 20 Heptan-2-one (CAS RN 110-43-0) 0 % - 31.12.2022
0.4274 ex 2914 19 90 30 3-Methylbutanone (CAS RN 563-80-4) 0 % - 31.12.2022
0.4275 ex 2914 19 90 40 Pentan-2-one (CAS RN 107-87-9) 0 % - 31.12.2022
0.7554 ex 2914 19 90 60 Zinc acetylacetonate (CAS RN 14024-63-6) 0 % - 31.12.2023
0.7568 ex 2914 29 00 15 oestr-5(10)-ene-3,17-dione (CAS RN 3962-66-1) 0 % - 31.12.2023
0.3475 ex 2914 29 00 20 Cyclohexadec-8-enone (CAS RN 3100-36–5) 0 % - 31.12.2023
0.7450 ex 2914 29 00 25 Cyclohex-2-enone (CAS RN 930-68-7) 0 % - 31.12.2023
0.4933 ex 2914 29 00 30 (R)-p-Mentha-1(6),8-dien-2-one (CAS RN 6485-40-1) 0 % - 31.12.2025
0.8015 ex 2914 29 00 35 4-(trans-4-Propylcyclohexyl)cyclohexanone (CAS RN 82832-73-3) with a purity by weight of 95 % or more 0 % - 31.12.2025
0.3480 ex 2914 29 00 40 Camphor 0 % - 31.12.2023
0.8058 ex 2914 29 00 45 4-Propylcyclohexan-1-one (CAS RN 40649-36-3) with a purity by weight of 95 % or more 0 % - 31.12.2025
0.5389 ex 2914 29 00 50 trans-β-Damascone (CAS RN 23726-91-2) 0 % - 31.12.2022
0.7422 ex 2914 29 00 70 2-sec-butylcyclohexanone (CAS RN 14765-30-1) 0 % - 31.12.2022
0.7389 ex 2914 29 00 80 1-(cedr-8-en-9-yl)ethanone (CAS RN 32388-55-9) 0 % - 31.12.2022
0.6265 ex 2914 39 00 15 2,6-Dimethyl-1-indanone (CAS RN 66309-83-9) 0 % - 31.12.2024
0.6447 ex 2914 39 00 25 1,3-Diphenylpropane-1,3-dione (CAS RN 120-46-7) 0 % - 31.12.2024
0.4227 ex 2914 39 00 30 Benzophenone (CAS RN 119-61-9) 0 % - 31.12.2022
0.4429 ex 2914 39 00 50 4-Phenylbenzophenone (CAS RN 2128-93-0) 0 % - 31.12.2023
0.4428 ex 2914 39 00 60 4-Methylbenzophenone (CAS RN 134-84-9) 0 % - 31.12.2023
0.5739 ex 2914 39 00 70 Benzil (CAS RN 134-81-6) 0 % - 31.12.2022
0.5535 ex 2914 39 00 80 4'-Methylacetophenone (CAS RN 122-00-9) 0 % - 31.12.2022
0.8288 ex 2914 40 90 10 Benzoin (CAS RN 119-53-9) with a purity by weight of 99 % or more 0 % - 31.12.2026
0.7824 ex 2914 50 00 15 1,1-dimethoxyacetone (CAS RN 6342-56-9) with a purity by weight of 98 % or more 0 % - 31.12.2024
0.8168 ex 2914 50 00 18 4'-Hydroxyacetophenone (CAS RN 99-93-4) with a purity by weight of 99 % or more 0 % - 31.12.2026
0.4932 ex 2914 50 00 20 3'-Hydroxyacetophenone (CAS RN 121-71-1) 0 % - 31.12.2025
0.8179 ex 2914 50 00 23 1-[2-(Oxiran-2-ylmethoxy)phenyl]-3-phenylpropan-1-one (CAS RN 22525-95-7) with a purity by weight of 99 % or more 0 % - 31.12.2026
0.5943 ex 2914 50 00 25 4'-Methoxyacetophenone (CAS RN 100-06-1) 0 % - 31.12.2023
0.8195 ex 2914 50 00 28 1,1'-{(2-hydroxypropane-1,3-diyl)bis[oxy(6-hydroxybenzene-2,1-diyl)]}diethanone (CAS RN 16150-44-0) with a purity by weight of 98 % or more 0 % - 31.12.2026
0.7797 ex 2914 50 00 35 2-Hydroxy-1-[4-[4-(2-hydroxy-2-methylpropanoyl)phenoxy]phenyl]-2-methylpropan-1-one (CAS-RN 71868-15-0) 0 % - 31.12.2024
0.5904 ex 2914 50 00 36 2,7-Dihydroxy-9-fluorenone (CAS RN 42523-29-5) 0 % - 31.12.2023
0.5435 ex 2914 50 00 40 4-(4-Hydroxyphenyl)butan-2-one (CAS RN 5471-51-2) 0 % - 31.12.2026
0.5809 ex 2914 50 00 45 3,4-Dihydroxybenzophenone (CAS RN 10425-11-3) 0 % - 31.12.2022
0.4235 ex 2914 50 00 60 2,2-Dimethoxy-2-phenylacetophenone (CAS RN 24650-42-8) 0 % - 31.12.2022
0.6762 ex 2914 50 00 75 7-Hydroxy-3,4-dihydro-1(2H)-naphthalenone (CAS RN 22009-38-7) 0 % - 31.12.2022
0.4385 ex 2914 50 00 80 2',6'-Dihydroxyacetophenone (CAS RN 699-83-2) 0 % - 31.12.2023
0.2647 ex 2914 69 80 10 2-Ethylanthraquinone (CAS RN 84-51-5) 0 % - 31.12.2023
0.2643 ex 2914 69 80 30 1,4-Dihydroxyanthraquinone (CAS RN 81-64-1) 0 % - 31.12.2023
0.5430 ex 2914 69 80 40 p-Benzoquinone (CAS RN 106-51-4) 0 % - 31.12.2023
0.6481 ex 2914 69 80 50 Reaction mass of 2-(1,2-dimethylpropyl)anthraquinone (CAS RN 68892-28-4) and 2-(1,1-dimethylpropyl)anthraquinone (CAS RN 32588-54-8) 0 % - 31.12.2024
0.7736 ex 2914 79 00 18 2-Chloro-1-cyclopropylethanone (CAS RN 7379-14-8) 0 % - 31.12.2024
0.5782 ex 2914 79 00 20 2,4'-Difluorobenzophenone (CAS RN 342-25-6) 0 % - 31.12.2022
0.7732 ex 2914 79 00 23 5-Chloro-2-hydroxybenzophenone (CAS RN 85-19-8) 0 % - 31.12.2024
0.7751 ex 2914 79 00 27 (2-Chloro-5-iodo-phenyl)-(4-fluoro-phenyl)-methanone (CAS RN 915095-86-2) 0 % - 31.12.2024
0.7467 ex 2914 79 00 30 5-Methoxy-1-[4-(trifluoromethyl)phenyl]pentan-1-one (CAS RN 61718-80-7) 0 % - 31.12.2023
0.7442 ex 2914 79 00 35 1-[4-(benzyloxy)phenyl]-2-bromopropan-1-one (CAS RN 35081-45-9) 0 % - 31.12.2023
0.3474 ex 2914 79 00 40 Perfluoro(2-methylpentan-3-one) (CAS RN 756-13-8) 0 % - 31.12.2023
0.2640 ex 2914 79 00 50 3'-Chloropropiophenone (CAS RN 34841-35-5) 0 % - 31.12.2023
0.4948 ex 2914 79 00 60 4'-tert-Butyl-2',6'-dimethyl-3',5'-dinitroacetophenone (CAS RN 81-14-1) 0 % - 31.12.2026
0.5237 ex 2914 79 00 70 4-Chloro-4'-hydroxybenzophenone (CAS RN 42019-78-3) 0 % - 31.12.2026
0.6120 ex 2914 79 00 80 Tetrachloro-p-benzoquinone (CAS RN 118-75-2) 0 % - 31.12.2023
0.7955 ex 2915 24 00 10 Acetic anhydride (CAS RN 108-24-7) with a purity by weight of 97 % or more 0 % - 31.12.2025
0.7433 ex 2915 39 00 10 Cis-3-hexenyl acetate (CAS RN 3681-71-8) 0 % - 31.12.2022
0.6155 ex 2915 39 00 25 2-Methylcyclohexyl acetate (CAS RN 5726-19-2) 0 % - 31.12.2023
0.7423 ex 2915 39 00 30 4-tert-butylcyclohexyl acetate (CAS RN 32210-23-4) 0 % - 31.12.2022
0.2957 ex 2915 39 00 40 tert-Butyl acetate (CAS RN 540-88-5) 0 % - 31.12.2023
0.5119 ex 2915 39 00 60 Dodec-8-enyl acetate (CAS RN 28079-04-1) 0 % - 31.12.2025
0.5121 ex 2915 39 00 65 Dodeca-7,9-dienyl acetate (CAS RN 54364-62-4) 0 % - 31.12.2025
0.5120 ex 2915 39 00 70 Dodec-9-enyl acetate (CAS RN 16974-11-1) 0 % - 31.12.2025
0.5289 ex 2915 39 00 75 Isobornyl acetate (CAS RN 125-12-2) 0 % - 31.12.2026
0.5301 ex 2915 39 00 80 1-Phenylethyl acetate (CAS RN 93-92-5) 0 % - 31.12.2026
0.5909 ex 2915 39 00 85 2-tert-Butylcyclohexyl acetate (CAS RN 88-41-5) 0 % - 31.12.2023
0.7834 ex 2915 40 00 10 Ethyl trichloroacetate (CAS RN 515-84-4) with a purity by weight of 98 % or more 0 % - 31.12.2024
0.7830 ex 2915 40 00 20 Sodium trichloroacetate (CAS RN 650-51-1) with a purity by weight of 96 % or more 0 % - 31.12.2024
0.5858 ex 2915 60 19 10 Ethyl butyrate (CAS RN 105-54-4) 0 % - 31.12.2022
0.7540 ex 2915 70 40 10 Methyl palmitate (CAS RN 112-39-0) 0 % - 31.12.2023
0.7541 ex 2915 90 30 10 Methyl laurate (CAS RN 111-82-0) 0 % - 31.12.2025
0.7899 ex 2915 90 70 18 Myristic acid, lithium salt (CAS RN 20336-96-3) with a purity by weight of 95 % or more 0 % - 31.12.2024
0.7407 ex 2915 90 70 20 Methyl (R)-2-fluoropropionate (CAS RN 146805-74-5) 0 % - 31.12.2022
0.8146 ex 2915 90 70 23 Tin bis(2-ethylhexanoate) (CAS RN 301-10-0) with a purity by weight of 97 % or more 0 % - 31.12.2025
0.7542 ex 2915 90 70 25 Methyl octanoate (CAS RN 111-11-5), methyl decanoate (CAS RN 110-42-9) or methyl myristate (CAS RN 124-10-7) 0 % - 31.12.2023
0.6003 ex 2915 90 70 27 Triethyl orthoformate (CAS RN 122-51-0) with a purity by weight of 99 % or more 0 % - 31.12.2023
0.5767 ex 2915 90 70 30 3,3-Dimethylbutyryl chloride (CAS RN 7065-46-5) 0 % - 31.12.2022
0.8154 ex 2915 90 70 33 Ethyl 8-bromooctanoate (CAS RN 29823-21-0) with a purity by weight of 98 % or more 0 % - 31.12.2026
0.5536 ex 2915 90 70 35 2,2-Dimethylbutanoyl chloride (CAS RN 5856-77-9) 0 % - 31.12.2023
0.8311 ex 2915 90 70 38 Pelargonic acid (CAS RN 112-05-0) with a purity by weight of 95 % or more 0 % - 31.12.2026
0.6255 ex 2915 90 70 45 Trimethyl orthoformate (CAS RN 149-73-5) 0 % - 31.12.2024
0.4791 ex 2915 90 70 50 Allyl heptanoate (CAS RN 142-19-8) 0 % - 31.12.2024
0.4954 ex 2915 90 70 60 Ethyl-6,8-dichlorooctanoate (CAS RN 1070-64-0) 0 % - 31.12.2025
0.2585 ex 2916 12 00 10 2-tert-Butyl-6-(3-tert-butyl-2-hydroxy-5-methylbenzyl)-4-methylphenyl acrylate (CAS RN 61167-58-6) 0 % - 31.12.2023
0.3977 ex 2916 12 00 40 2,4-Di-tert-pentyl-6-[1-(3,5-di-tert-pentyl-2-hydroxyphenyl)ethyl]phenylacrylate (CAS RN 123968-25-2) 0 % - 31.12.2023
0.5808 ex 2916 12 00 70 2-(2-Vinyloxyethoxy)ethyl acrylate (CAS RN 86273-46-3) 0 % - 31.12.2022
0.3466 ex 2916 13 00 30 Zinc monomethacrylate powder (CAS RN 63451-47-8) whether or not containing not more than 17 % by weight of manufacturing impurities 0 % - 31.12.2025
0.3468 ex 2916 13 00 40 Zinc Dimethacrylate (CAS RN 13189-00-9) in the form of powder with a purity by weight of 99 % or more, with not more than 1 % of a stabiliser 0 % - 31.12.2023
0.2638 ex 2916 14 00 10 2,3-Epoxypropyl methacrylate (CAS RN 106-91-2) 0 % - 31.12.2023
0.6190 ex 2916 14 00 20 Ethyl methacrylate (CAS RN 97-63-2) 0 % - 31.12.2023
0.2951 ex 2916 19 95 20 Methyl 3,3-dimethylpent-4-enoate (CAS RN 63721-05-1) 0 % - 31.12.2023
0.5991 ex 2916 19 95 40 Sorbic acid (CAS RN 110-44-1) for use in the manufacture of animal feeds (1) 0 % - 31.12.2023
0.6238 ex 2916 19 95 50 Methyl 2-fluoroacrylate (CAS RN 2343-89-7) 0 % - 31.12.2024
0.7980 ex 2916 19 95 60 Methyl 2-fluoroprop-2-enoate (CAS RN 2343-89-7) with a purity by weight of 93 % or more, whether or not with not more than 7 % of the stabiliser 2,6-di-tert-butyl-p-cresol (CAS RN 128-37-0) and Tetrabutylammonium nitrite (CAS RN 26501-54-2) 0 % - 31.12.2025
0.7940 ex 2916 19 95 70 Methyl 3-methyl-2-butenoate (CAS RN 924-50-5) with a purity by weight of 99,0 % or more 0 % - 31.12.2025
0.7023 ex 2916 20 00 15 Transfluthrin (ISO) (CAS RN 118712-89-3) 0 % - 31.12.2026
0.7437 ex 2916 20 00 20 Mixture of the (1S,2R,6R,7R)-and(1R,2R,6R,7S)-isomers of ethyl tricyclo[5.2.1.0(2,6)]decane-2-carboxylate (CAS RNs 80657-64-3 and 80623-07-0) 0 % - 31.12.2022
0.7931 ex 2916 20 00 25 Cyclohexanecarbonyl chloride (CAS RN 2719-27-9) with a purity by weight of 99 % or more 0 % - 31.12.2025
0.7933 ex 2916 20 00 35 2-Cyclopropylacetic acid (CAS RN 5239-82-7) with a purity by weight of 95 % or more 0 % - 31.12.2025
0.8057 ex 2916 20 00 45 Cyclopentanecarboxylic acid (CAS RN 3400-45-1) with a purity by weight of 98 % or more 0 % - 31.12.2025
0.3463 ex 2916 20 00 50 Ethyl 2,2-dimethyl-3-(2-methylpropenyl)cyclopropanecarboxylate (CAS RN 97-41-6) 0 % - 31.12.2023
0.4931 ex 2916 20 00 60 3-Cyclohexylpropionic acid (CAS RN 701-97-3) 0 % - 31.12.2025
0.7531 ex 2916 20 00 70 Cyclopropanecarbonyl chloride (CAS RN 4023-34-1) 0 % - 31.12.2023
0.5421 ex 2916 31 00 10 Benzyl benzoate (CAS RN 120-51-4) 0 % - 31.12.2026
0.8214 ex 2916 31 00 20 Phenethyl benzoate (CAS RN 94-47-3) with a purity by weight of 95 % or more 0 % - 31.12.2026
0.6248 ex 2916 39 90 13 3,5-Dinitrobenzoic acid (CAS RN 99-34-3) 0 % - 31.12.2024
0.5214 ex 2916 39 90 15 2-Chloro-5-nitrobenzoic acid (CAS RN 2516-96-3) 0 % - 31.12.2026
0.7929 ex 2916 39 90 16 3-Fluoro-5-iodo-4-methylbenzoic acid (CAS RN 861905-94-4) with a purity by weight of 97 % or more 0 % - 31.12.2025
0.2636 ex 2916 39 90 20 3,5-Dichlorobenzoyl chloride (CAS RN 2905-62-6) 0 % - 31.12.2023
0.7845 ex 2916 39 90 22 6-bromo-2-fluoro-3-(trifluoromethyl)benzoic acid (CAS RN 1026962-68-4) with a purity by weight of 95 % or more 0 % - 31.12.2024
0.6557 ex 2916 39 90 23 (2,4,6-Trimethylphenyl)acetyl chloride (CAS RN 52629-46-6) 0 % - 31.12.2024
0.4951 ex 2916 39 90 25 2-Methyl-3-(4-Fluorophenyl)-propionyl chloride (CAS RN 1017183-70-8) 0 % - 31.12.2026
0.7827 ex 2916 39 90 27 Methyl 6-Bromo-2-naphthoate (CAS RN 33626-98-1) with a purity by weight of 99 % or more 0 % - 31.12.2024
0.4930 ex 2916 39 90 30 2,4,6-Trimethylbenzoyl chloride (CAS RN 938-18-1) 0 % - 31.12.2025
0.5944 ex 2916 39 90 35 Methyl 4-tert-butylbenzoate (CAS RN 26537-19-9) 0 % - 31.12.2023
0.6794 ex 2916 39 90 41 4-Bromo-2,6-difluorobenzoyl chloride (CAS RN 497181-19-8) 0 % - 31.12.2025
0.7734 ex 2916 39 90 43 2-(3,5-Bis(trifluoromethyl)phenyl)-2-methylpropanoic acid (CAS RN 289686-70-0) 0 % - 31.12.2024
0.6121 ex 2916 39 90 48 3-Fluorobenzoyl chloride (CAS RN 1711-07-5) 0 % - 31.12.2023
0.2634 ex 2916 39 90 50 3,5-Dimethylbenzoyl chloride (CAS RN 6613-44-1) 0 % - 31.12.2023
0.6661 ex 2916 39 90 53 5-Iodo-2-methylbenzoic acid (CAS RN 54811-38-0) 0 % - 31.12.2025
0.4238 ex 2916 39 90 55 4-tert-Butylbenzoic acid (CAS RN 98-73-7 ) 0 % - 31.12.2022
0.7678 ex 2916 39 90 57 2-Phenylprop-2-enoic acid (CAS RN 492-38-6) 0 % - 31.12.2023
0.8169 ex 2916 39 90 63 2-Phenylbutyric acid (CAS RN 90-27-7) with a purity by weight of 99 % or more 0 % - 31.12.2026
0.3462 ex 2916 39 90 70 Ibuprofen (INN) (CAS RN 15687-27-1) 0 % - 31.12.2023
0.7117 ex 2916 39 90 73 (2,4-Dichlorophenyl)acetyl chloride (CAS RN 53056-20-5) 0 % - 31.12.2026
0.5541 ex 2916 39 90 75 m-Toluic acid (CAS RN 99-04-7) 0 % - 31.12.2022
0.8039 ex 2916 39 90 78 (2,5-dibromophenyl)acetic acid (CAS RN 203314-28-7) with a purity by weight of 98,0 % or more 0 % - 31.12.2025
0.5543 ex 2916 39 90 85 (2,4,5-Trifluorophenyl)acetic acid (CAS RN 209995-38-0) 0 % - 31.12.2022
0.3457 ex 2917 11 00 20 Bis(p-methylbenzyl) oxalate (CAS RN 18241-31-1) 0 % - 31.12.2023
0.4746 ex 2917 11 00 30 Cobalt oxalate (CAS RN 814-89-1) 0 % - 31.12.2024
0.7563 ex 2917 12 00 20 Bis(3,4-epoxycyclohexylmethyl) adipate (CAS RN 3130-19-6) 0 % - 31.12.2023
0.4684 ex 2917 19 10 10 Dimethyl malonate (CAS RN 108-59-8) 0 % - 31.12.2024
0.5602 ex 2917 19 10 20 Diethyl malonate (CAS RN 105-53-3) 0 % - 31.12.2022
0.6089 ex 2917 19 80 15 Dimethyl but-2-ynedioate (CAS RN 762-42-5) 0 % - 31.12.2023
0.4790 ex 2917 19 80 30 Ethylene brassylate (CAS RN 105-95-3) 0 % - 31.12.2024
0.7451 ex 2917 19 80 35 Diethyl methylmalonate (CAS RN 609-08-5) 0 % - 31.12.2023
0.7880 ex 2917 19 80 45 Iron fumarate (CAS RN 141-01-5) with a purity by weight of 93 % or more 0 % - 31.12.2024
0.4918 ex 2917 19 80 50 Tetradecanedioic acid (CAS RN 821-38-5) 0 % - 31.12.2025
0.8302 ex 2917 19 80 55 Maleic acid (CAS RN 110-16-7) with a purity by weight of 99 % or more 3,2 % - 31.12.2022
0.3454 ex 2917 19 80 70 Itaconic acid (CAS RN 97-65-4) 0 % - 31.12.2023
0.2631 ex 2917 20 00 30 1,4,5,6,7,7-Hexachloro-8,9,10-trinorborn-5-ene-2,3-dicarboxylic anhydride (CAS RN 115-27-5) 0 % - 31.12.2023
0.2627 ex 2917 20 00 40 3-Methyl-1,2,3,6-tetrahydrophthalic anhydride (CAS RN 5333-84-6) 0 % - 31.12.2023
0.2954 ex 2917 34 00 10 Diallyl phthalate (CAS RN 131-17-9) 0 % - 31.12.2023
0.4945 ex 2917 39 95 20 Dibutyl-1,4-benzenedicarboxylate (CAS RN 1962-75-0) 0 % - 31.12.2025
0.6796 ex 2917 39 95 25 Naphthalene-1,8-dicarboxylic anhydride (CAS RN 81-84-5) 0 % - 31.12.2025
0.3640 ex 2917 39 95 30 Benzene-1,2:4,5-tetracarboxylic dianhydride (CAS RN 89-32-7) 0 % - 31.12.2025
0.6800 ex 2917 39 95 35 1-Methyl-2-nitroterephthalate (CAS RN 35092-89-8) 0 % - 31.12.2025
0.6123 ex 2917 39 95 40 Dimethyl 2-nitroterephthalate (CAS RN 5292-45-5) 0 % - 31.12.2023
0.8255 ex 2917 39 95 45 3-(4-Chlorophenyl)glutaric acid (CAS RN 35271-74-0) with a purity by weight of 98 % or more 0 % - 31.12.2026
0.6553 ex 2917 39 95 50 1,4,5,8-Naphthalenetetracarboxylic acid-1,8-monoanhydride (CAS RN 52671-72-4) 0 % - 31.12.2024
0.6554 ex 2917 39 95 60 Perylene-3,4:9,10-tetracarboxylic dianhydride(CAS RN 128-69-8) 0 % - 31.12.2024
0.6366 ex 2918 19 30 10 Cholic acid (CAS RN 81-25-4) 0 % - 31.12.2024
0.6367 ex 2918 19 30 20 3-α,12-α-Dihydroxy-5-β-cholan-24-oic acid (deoxycholic acid) (CAS RN 83-44-3) 0 % - 31.12.2024
0.2950 ex 2918 19 98 20 L-Malic acid (CAS RN 97-67-6) 0 % - 31.12.2023
0.7702 ex 2918 19 98 30 Ethyl 1-hydroxycyclopentanecarboxylate (CAS RN 41248-23-1) 0 % - 31.12.2024
0.7703 ex 2918 19 98 40 Ethyl 1-hydroxycyclohexanecarboxylate (CAS RN 1127-01-1) 0 % - 31.12.2024
0.7907 ex 2918 19 98 50 12-Hydroxyoctadecanoic acid (CAS RN 106-14-9) with a purity by weight of 90 % or more for use in the manufacture of polyglycerin-poly-12-hydroxyoctadecanoic acid esters (1) 0 % - 31.12.2024
0.8044 ex 2918 19 98 60 (R)-tert-butyl 2'-(1-hydroxyethyl)-3-methyl-[1,1'-biphenyl]-4-carboxylate (CAS RN 1246560-92-8) with a purity by weight of 98 % or more 0 % - 31.12.2025
0.3637 ex 2918 29 00 10 Monohydroxynaphthoic acids 0 % - 31.12.2023
0.5781 ex 2918 29 00 35 Propyl 3,4,5-trihydroxybenzoate (CAS RN 121-79-9) 0 % - 31.12.2022
0.8008 ex 2918 29 00 40 3-Hydroxy-4-nitrobenzoic acid (CAS RN 619-14-7) with a purity by weight of more than 96,5 % 0 % - 31.12.2025
0.3638 ex 2918 29 00 50 Hexamethylene bis[3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate] (CAS RN 35074-77-2) 0 % - 31.12.2023
0.5220 ex 2918 29 00 60 Methyl-, ethyl-, propyl- or butyl esters of 4-hydroxybenzoic acid or their sodium salts (CAS RN 35285-68-8, 99-76-3, 5026-62-0, 94-26-8, 94-13-3, 35285-69-9, 120-47-8, 36457-20-2 or 4247-02-3) 0 % - 31.12.2026
0.6456 ex 2918 29 00 70 3,5-Diiodosalicylic acid (CAS RN 133-91-5) 0 % - 31.12.2024
0.7344 ex 2918 30 00 15 2-fluoro-5-formylbenzoic acid (CAS RN 550363-85-4) 0 % - 31.12.2022
0.7605 ex 2918 30 00 25 (E)-1-ethoxy-3-oxobut-1-en-1-olate; 2-methylpropan-1-olate; titanium(4+) (CAS RN 83877-91-2) 0 % - 31.12.2023
0.4427 ex 2918 30 00 30 Methyl-2-benzoylbenzoate (CAS RN 606-28-0) 0 % - 31.12.2023
0.7864 ex 2918 30 00 35 3-Oxocyclobutane-1-carboxylic acid with a purity by weight of 98 % or more (CAS RN 23761-23-1) 0 % - 31.12.2024
0.8075 ex 2918 30 00 45 Methyl 5-oxo-6,7,8,9-tetrahydro-5H-benzo[7]annulene-2-carboxylate (CAS RN 150192-89-5) with a purity by weight of 96 % or more 0 % - 31.12.2025
0.5857 ex 2918 30 00 50 Ethyl acetoacetate (CAS RN 141-97-9) 0 % - 31.12.2022
0.8256 ex 2918 30 00 55 Methyl 3-oxo-pentanoate (CAS RN 30414-53-0) with a purity by weight of 98 % or more 0 % - 31.12.2026
0.6250 ex 2918 30 00 60 4-Oxovaleric acid (CAS RN 123-76-2) 0 % - 31.12.2024
0.6455 ex 2918 30 00 70 2-[4-Chloro-3-(chlorosulphonyl)benzoyl]benzoic acid (CAS RN 68592-12-1) 0 % - 31.12.2024
0.7062 ex 2918 30 00 80 Methyl benzoylformate (CAS RN 15206-55-0) 0 % - 31.12.2026
0.2946 ex 2918 99 90 10 3,4-Epoxycyclohexylmethyl 3,4-epoxycyclohexanecarboxylate (CAS RN 2386-87-0) 0 % - 31.12.2023
0.6814 ex 2918 99 90 13 3-Methoxy-2-methylbenzoyl chloride (CAS RN 24487-91-0) 0 % - 31.12.2025
0.5856 ex 2918 99 90 15 Ethyl 2,3-epoxy-3-phenylbutyrate (CAS RN 77-83-8) 0 % - 31.12.2022
0.6901 ex 2918 99 90 18 Ethyl 2-hydroxy-2-(4-phenoxyphenyl)propanoate (CAS RN 132584-17-9) 0 % - 31.12.2025
0.2949 ex 2918 99 90 20 Methyl 3-methoxyacrylate (CAS RN 5788-17-0) 0 % - 31.12.2024
0.6147 ex 2918 99 90 25 Methyl (E)-3-methoxy-2-(2-chloromethylphenyl)-2-propenoate (CAS RN 117428-51-0) 0 % - 31.12.2023
0.7256 ex 2918 99 90 27 Ethyl 3-ethoxypropionate (CAS RN 763-69-9) 0 % - 31.12.2022
0.2948 ex 2918 99 90 30 Methyl 2-(4-hydroxyphenoxy)propionate (CAS RN 96562-58-2) 0 % - 31.12.2023
0.7597 ex 2918 99 90 33 Vanillic Acid (CAS RN 121-34-6) containing — not more than 10 ppm of Palladium (CAS RN 7440-05-3), — not more than 10 ppm of bismuth (CAS RN 7440-69-9), — not more than 14 ppm of formaldehyde (CAS RN 50-00-0), — not more than 1,3 % by weight of 3,4-dihydroxybenzoic acid (CAS RN 99-50-3), — not more than 0,5 % by weight of vanillin (CAS RN 121-33-5) 0 % - 31.12.2023
0.6342 ex 2918 99 90 35 p-Anisic acid (CAS RN 100-09-4) 0 % - 31.12.2024
0.7358 ex 2918 99 90 38 Diclofop-methyl (ISO) (CAS RN 51338-27-3) 0 % - 31.12.2022
0.2945 ex 2918 99 90 40 trans-4-Hydroxy-3-methoxycinnamic acid (CAS RN 1135-24-6) 0 % - 31.12.2023
0.7934 ex 2918 99 90 43 Vanillic acid (CAS RN 121-34-6) with a purity by weight of 98,5 % or more 0 % - 31.12.2025
0.6224 ex 2918 99 90 45 4-Methylcatechol dimethyl acetate (CAS RN 52589-39-6) 0 % - 31.12.2024
0.8066 ex 2918 99 90 48 2-Bromo-5-methoxybenzoic acid (CAS RN 22921-68-2) with a purity by weight of 98 % or more 0 % - 31.12.2025
0.2947 ex 2918 99 90 50 Methyl 3,4,5-trimethoxybenzoate (CAS RN 1916-07-0) 0 % - 31.12.2023
0.6552 ex 2918 99 90 55 Stearyl glycyrrhetinate(CAS RN 13832-70-7) 0 % - 31.12.2024
0.2943 ex 2918 99 90 60 3,4,5-Trimethoxybenzoic acid (CAS RN 118-41-2) 0 % - 31.12.2023
0.6523 ex 2918 99 90 65 Acetic acid, difluoro[1,1,2,2-tetrafluoro-2-(pentafluoroethoxy)ethoxy]-, ammonium salt (CAS RN 908020-52-0) 0 % - 31.12.2024
0.4742 ex 2918 99 90 70 Allyl-(3-methylbutoxy)acetate (CAS RN 67634-00-8) 0 % - 31.12.2024
0.6747 ex 2918 99 90 85 Trinexapac-Ethyl (ISO) (CAS RN 95266-40-3) with a purity by weight of 96 % or more 0 % - 31.12.2025
0.7462 ex 2919 90 00 15 Benzene-1,3-diyl tetraphenyl bis(phosphate) (CAS RN 57583-54-7) 0 % - 31.12.2023
0.7723 ex 2919 90 00 25 Triphenyl phosphate (CAS RN 115-86-6) 0 % - 31.12.2024
0.2940 ex 2919 90 00 30 Aluminium hydroxybis[2,2'-methylenebis(4,6-di-tert-butylphenyl)phosphate] (CAS RN 151841-65-5) 0 % - 31.12.2023
0.2942 ex 2919 90 00 35 2,2'-Methylenebis(4,6-di-tert-butylphenyl) phosphate, monosodium salt (CAS RN 85209-91-2) with a purity by weight of 95 % or more, with particles greater than 100μm used in the manufacture of nucleating agents with a particle size (D90) no greater than 35 μm as measured by a light scattering technique (1) 0 % - 31.12.2023
0.3867 ex 2919 90 00 40 Tri-n-hexylphosphate (CAS RN 2528-39-4) 0 % - 31.12.2023
0.5495 ex 2919 90 00 50 Triethyl phosphate (CAS RN 78-40-0) 0 % - 31.12.2026
0.6188 ex 2919 90 00 60 Bisphenol-A bis(diphenyl phosphate) (CAS RN 5945-33-5) 0 % - 31.12.2023
0.6413 ex 2919 90 00 70 Tris(2-butoxyethyl)phosphate (CAS RN 78-51-3) 0 % - 31.12.2024
0.6253 ex 2920 19 00 30 2,2'-Oxybis(5,5-dimethyl-1,3,2-dioxaphosphorinane)-2,2'-disulphide (CAS RN 4090-51-1) 0 % - 31.12.2024
0.2941 ex 2920 19 00 40 Tolclofos-methyl (ISO) (CAS RN 57018-04-9) with a purity by weight of 96 % or more 0 % - 31.12.2023
0.3634 2920 23 00 Trimethyl phosphite (CAS RN 121-45-9) 0 % - 31.12.2023
0.4158 2920 24 00 Triethyl phosphite (CAS RN 122-52-1) 0 % - 31.12.2026
0.2626 ex 2920 29 00 10 O,O'-Dioctadecyl pentaerythritol bis(phosphite) (CAS RN 3806-34-6) 0 % - 31.12.2023
0.7227 ex 2920 29 00 15 Phosphorous acid 3,3',5,5'-tetrakis(1,1-dimethylethyl)-6,6'-dimethyl[1,1'-biphenyl]-2,2'-diyl tetra-1-naphthalenyl ester (CAS RN 198979-98-5) 0 % - 31.12.2022
0.5038 ex 2920 29 00 20 Tris(methylphenyl)phosphite (CAS RN 25586-42-9) 0 % - 31.12.2025
0.5045 ex 2920 29 00 40 Bis(2,4-dicumylphenyl)pentaerythritol diphosphite (CAS RN 154862-43-8) 0 % - 31.12.2025
0.6004 ex 2920 29 00 50 Fosetyl-aluminium (CAS RN 39148-24-8) 0 % - 31.12.2023
0.7898 ex 2920 29 00 80 2,4,8,10-tetrakis(1,1-dimethylethyl)-6-(2-ethylhexyloxy)-12H dibenzo[d,g][1,3,2]dioxaphosphocin (CAS RN 126050-54-2) with a purity by weight of 95 % or more 0 % - 31.12.2024
0.3635 ex 2920 90 10 10 Diethyl sulphate (CAS RN 64-67-5) 0 % - 31.12.2023
0.7559 ex 2920 90 10 15 Ethyl methyl carbonate (CAS RN 623-53-0) 3,2 % - 31.12.2022
0.2605 ex 2920 90 10 20 Diallyl 2,2'-oxydiethyl dicarbonate (CAS RN 142-22-3) 0 % - 31.12.2023
0.3685 ex 2920 90 10 40 Dimethyl carbonate (CAS RN 616-38-6) 0 % - 31.12.2023
0.8297 ex 2920 90 10 45 Ethylene carbonate (CAS RN 96-49-1) with a purity by weight of 99 % or more 3,2 % - 31.12.2022
0.3868 ex 2920 90 10 50 Di-tert-butyl dicarbonate (CAS RN 24424-99-5) 0 % - 31.12.2023
0.8298 ex 2920 90 10 55 Vinylene carbonate (CAS RN 872-36-6) with a purity by weight of 99,9 % or more 3,2 % - 31.12.2022
0.5756 ex 2920 90 10 60 2,4-Di-tert-butyl-5-nitrophenyl methyl carbonate (CAS RN 873055-55-1) 0 % - 31.12.2022
0.8299 ex 2920 90 10 65 Vinyl ethylene carbonate (CAS RN 4427-96-7) with a purity by weight of 99 % or more 3,2 % - 31.12.2022
0.7588 ex 2920 90 70 20 Diethyl phosphorochloridate (CAS RN 814-49-3) 0 % - 31.12.2023
0.7465 ex 2920 90 70 30 2-isopropoxy-4,4,5,5-tetramethyl-1,3,2-dioxaborolane (CAS RN 61676-62-8) 0 % - 31.12.2023
0.5947 ex 2920 90 70 60 Bis(neopentylglycolato)diboron (CAS RN 201733-56-4) 0 % - 31.12.2023
0.6598 ex 2920 90 70 80 Bis(pinacolato)diboron (CAS RN 73183-34-3) 0 % - 31.12.2025
0.5668 2921 13 00 2-(N,N-Diethylamino)ethyl chloride hydrochloride (CAS RN 869-24-9) 0 % - 31.12.2022
0.3629 ex 2921 19 99 20 Ethyl(2-methylallyl)amine (CAS RN 18328-90-0) 0 % - 31.12.2023
0.3631 ex 2921 19 99 30 Allylamine (CAS RN 107-11-9) 0 % - 31.12.2023
0.7073 ex 2921 19 99 45 2-Chloro-N-(2-chloroethyl)ethanamine hydrochloride (CAS RN 821-48-7) 0 % - 31.12.2026
0.5650 ex 2921 19 99 70 N,N-Dimethyloctylamine – boron trichloride (1:1) (CAS RN 34762-90-8) 0 % - 31.12.2022
0.6269 ex 2921 19 99 80 Taurine (CAS RN 107-35-7), with 0,5 % addition of anti-caking agent silicon dioxide (CAS RN 112926-00-8) 0 % - 31.12.2024
0.8045 ex 2921 29 00 15 (2S)-propane-1,2-diamine dihydrochloride (CAS RN 19777-66-3) with a purity by weight of 98 % or more 0 % - 31.12.2025
0.3630 ex 2921 29 00 20 Tris[3-(dimethylamino)propyl]amine (CAS RN 33329-35-0) 0 % - 31.12.2023
0.8067 ex 2921 29 00 25 N,N'-Diallylpropane-1,3-diamine dihydrochloride (CAS RN 205041-15-2) with a purity by weight or 96 % or more 0 % - 31.12.2025
0.3625 ex 2921 29 00 30 Bis[3-(dimethylamino)propyl]methylamine (CAS RN 3855-32-1) 0 % - 31.12.2023
0.8170 ex 2921 29 00 35 Pentamethylenediamine (CAS RN 462-94-2) with a purity by weight of 99 % or more, also as an aqueous solution containing by weight more than 50 % of pentamethylenediamine 0 % - 31.12.2026
0.4917 ex 2921 29 00 40 Decamethylenediamine (CAS RN 646-25-3) 0 % - 31.12.2025
0.5256 ex 2921 29 00 50 N'-[3-(Dimethylamino)propyl]-N,N-dimethylpropane-1,3-diamine (CAS RN 6711-48-4) 0 % - 31.12.2026
0.7947 ex 2921 29 00 70 N,N,N',N'-tetramethylethylenediamine (CAS RN 110-18-9) with a purity by weight of 99 % or more 0 % - 31.12.2025
0.7488 ex 2921 30 10 10 2-(4-(cyclopropanecarbonyl)phenyl)-2-methylpropanoic acid cyclohexylamine salt (CAS RN 1690344-90-1) 0 % - 31.12.2023
0.5768 ex 2921 30 99 40 Cyclopropylamine (CAS RN 765-30-0) 0 % - 31.12.2022
0.7750 ex 2921 30 99 50 Bicyclo[1.1.1]pentan-1-amine hydrochloride (CAS RN 22287-35-0) 0 % - 31.12.2024
0.3909 ex 2921 42 00 25 Sodium hydrogen 2-aminobenzene-1,4-disulphonate (CAS RN 24605-36-5) 0 % - 31.12.2023
0.3978 ex 2921 42 00 35 2-Nitroaniline (CAS RN 88-74-4) 0 % - 31.12.2023
0.3979 ex 2921 42 00 45 2,4,5-Trichloroaniline (CAS RN 636-30-6) 0 % - 31.12.2023
0.2620 ex 2921 42 00 50 3-Aminobenzenesulfonic acid (CAS RN 121-47-1) 0 % - 31.12.2023
0.7739 ex 2921 42 00 55 4-Chloroaniline (CAS RN 106-47-8) 0 % - 31.12.2024
0.3623 ex 2921 42 00 70 2-Aminobenzene-1,4-disulfonic acid (CAS RN 98-44-2) 0 % - 31.12.2024
0.3622 ex 2921 42 00 80 4-Chloro-2-nitroaniline (CAS RN 89-63-4) 0 % - 31.12.2023
0.3687 ex 2921 42 00 85 3,5-Dichloroaniline (CAS RN 626-43-7) 0 % - 31.12.2023
0.5616 ex 2921 42 00 86 2,5-Dichloroaniline (CAS RN 95-82-9) 0 % - 31.12.2022
0.5603 ex 2921 42 00 87 N-Methylaniline (CAS RN 100-61-8) 0 % - 31.12.2022
0.5617 ex 2921 42 00 88 3,4-Dichloroaniline-6-sulphonic acid (CAS RN 6331-96-0) 0 % - 31.12.2022
0.2617 ex 2921 43 00 20 4-Amino-6-chlorotoluene-3-sulphonic acid (CAS RN 88-51-7) 0 % - 31.12.2023
0.2615 ex 2921 43 00 30 3-Nitro-p-toluidine (CAS RN 119-32-4) 0 % - 31.12.2023
0.3980 ex 2921 43 00 40 4-Aminotoluene-3-sulphonic acid (CAS RN 88-44-8) 0 % - 31.12.2024
0.5124 ex 2921 43 00 60 3-Aminobenzotrifluoride (CAS RN 98-16-8) 0 % - 31.12.2025
0.7583 ex 2921 43 00 70 5-Bromo-4-fluoro-2-methylaniline (CAS RN 627871-16-3) 0 % - 31.12.2023
0.3621 ex 2921 44 00 20 Diphenylamine (CAS RN 122-39-4) 0 % - 31.12.2023
0.2618 ex 2921 45 00 20 2-Aminonaphthalene-1,5-disulphonic acid (CAS RN 117-62-4) or one of its sodium salts (CAS RN 19532-03-7) or (CAS RN 62203-79-6) 0 % - 31.12.2024
0.7628 ex 2921 45 00 30 (5 or 8)-Aminonaphthalene-2-sulphonic acid (CAS RN 51548-48-2) 0 % - 31.12.2023
0.5994 ex 2921 45 00 50 7-Aminonaphthalene-1,3,6-trisulphonic acid (CAS RN 118-03-6) 0 % - 31.12.2024
0.7316 ex 2921 45 00 60 1-Naphthylamine (CAS RN 134-32-7) 0 % - 31.12.2022
0.7315 ex 2921 45 00 70 8-Aminonaphthalene-2-sulphonic acid (CAS RN 119-28-8) 0 % - 31.12.2022
0.7629 ex 2921 45 00 80 2-Aminonaphthalene-1-sulphonic acid (CAS RN 81-16-3) 0 % - 31.12.2023
0.3618 ex 2921 49 00 20 Pendimethalin (ISO) (CAS RN 40487-42-1) 3,5 % - 31.12.2023
0.7705 ex 2921 49 00 30 4-Isopropylaniline (CAS RN 99-88-7) 0 % - 31.12.2024
0.7592 ex 2921 49 00 35 2-Ethylaniline (CAS RN 578-54-1) 0 % - 31.12.2023
0.2609 ex 2921 49 00 40 N-1-Naphthylaniline (CAS RN 90-30-2) 0 % - 31.12.2023
0.8019 ex 2921 49 00 45 2-(4-Biphenylyl)amino-9,9-dimethylfluoren (CAS RN 897671-69-1) with a purity by weight of 95 % or more 0 % - 31.12.2025
0.8020 ex 2921 49 00 55 2-(2-Biphenylyl)amino-9,9-dimethylfluoren (CAS RN 1198395-24-2) with a purity by weight of 95 % or more 0 % - 31.12.2025
0.6825 ex 2921 49 00 60 2,6-Diisopropylaniline (CAS RN 24544-04-5) 0 % - 31.12.2025
0.8059 ex 2921 49 00 65 Bis-(9,9-dimethylfluoren-2-yl)amine (CAS RN 500717-23-7) with a purity by weight of 95 % or more 0 % - 31.12.2025
0.3981 ex 2921 51 19 30 2-Methyl-p-phenylenediamine sulphate (CAS RN 615-50-9) 0 % - 31.12.2023
0.4184 ex 2921 51 19 40 p-Phenylenediamine (CAS RN 106-50-3) 0 % - 31.12.2026
0.4498 ex 2921 51 19 50 Mono- and dichloroderivatives of p-phenylenediamine and p-diaminotoluene 0 % - 31.12.2024
0.5995 ex 2921 51 19 60 2,4-Diaminobenzenesulphonic acid (CAS RN 88-63-1) 0 % - 31.12.2024
0.7894 ex 2921 51 90 10 N-(4-Chlorophenyl)benzene-1,2-diamine (CAS RN 68817-71-0) with a purity by weight of 97 % or more 0 % - 31.12.2024
0.2612 ex 2921 59 90 10 Mixture of isomers of 3,5-diethyltoluenediamine (CAS RN 68479-98-1, CAS RN 75389-89-8) 0 % - 31.12.2023
0.3785 ex 2921 59 90 30 3,3'-Dichlorobenzidine dihydrochloride (CAS RN 612-83-9) 0 % - 31.12.2022
0.3870 ex 2921 59 90 40 4,4'-Diaminostilbene-2,2'-disulphonic acid (CAS RN 81-11-8) 0 % - 31.12.2023
0.5509 ex 2921 59 90 60 (2R,5R)-1,6-Diphenylhexane-2,5-diamine dihydrochloride (CAS RN 1247119-31-8) 0 % - 31.12.2022
0.7860 ex 2922 19 00 15 Aqueous solution, containing by weight: — 73 % or more 2-amino-2-methyl-1-propanol (CAS RN 124-68-5), — 4,5 % or more, but not more than 27 % water (CAS RN 7732-18-5) 0 % - 31.12.2024
0.5757 ex 2922 19 00 20 2-(2-Methoxyphenoxy)ethylamine hydrochloride (CAS RN 64464-07-9) 0 % - 31.12.2022
0.7946 ex 2922 19 00 29 N-Methyl-N-(2-hydroxyethyl)-p-toluidine (CAS RN 2842-44-6) with a purity by weight of 99 % or more 0 % - 31.12.2025
0.3617 ex 2922 19 00 30 N,N,N',N'-Tetramethyl-2,2'-oxybis(ethylamine) (CAS RN 3033-62-3) 0 % - 31.12.2023
0.6947 ex 2922 19 00 35 2-[2-(Dimethylamino)ethoxy] ethanol (CAS RN 1704-62-7) 0 % - 31.12.2025
0.7179 ex 2922 19 00 40 (R)-1-((4-amino-2-bromo-5-fluorophenyl)amino)-3-(benzyloxy)propan-2-ol 4-methylbenzenesulphonate (CAS RN 1294504-64-5) 0 % - 31.12.2026
0.7480 ex 2922 19 00 45 2-Methoxymethyl-p-phenylenediamine (CAS RN 337906-36-2) 0 % - 31.12.2023
0.3616 ex 2922 19 00 53 2-(2-Methoxyphenoxy)ethanamine (CAS RN 1836-62-0) with a purity by weight of 98 % or more 0 % - 31.12.2024
0.7587 ex 2922 19 00 55 3-Aminoadamantan-1-ol (CAS RN 702-82-9) 0 % - 31.12.2023
0.3871 ex 2922 19 00 60 N,N,N'-trimethyl-N'-(2-hydroxy-ethyl) 2,2'-oxybis(ethylamine), (CAS RN 83016-70-0) 0 % - 31.12.2023
0.5905 ex 2922 19 00 65 trans-4-Aminocyclohexanol (CAS RN 27489-62-9) 0 % - 31.12.2023
0.7935 ex 2922 19 00 70 2-Benzylaminoethanol (CAS 104-63-2) with a purity by weight of 98 % or more 0 % - 31.12.2025
0.5986 ex 2922 19 00 75 2-Ethoxyethylamine (CAS RN 110-76-9) 0 % - 31.12.2023
0.4665 ex 2922 19 00 80 N-[2-[2-(Dimethylamino)ethoxy]ethyl]-N-methyl-1,3-propanediamine (CAS RN 189253-72-3) 0 % - 31.12.2024
0.5911 ex 2922 19 00 85 (1S,4R)-cis-4-Amino-2-cyclopentene-1-methanol-D-tartrate (CAS RN 229177-52-0) 0 % - 31.12.2023
0.5996 ex 2922 21 00 10 2-Amino-5-hydroxynaphthalene-1,7-disulphonic acid (CAS RN 6535-70-2) 0 % - 31.12.2024
0.2703 ex 2922 21 00 30 6-Amino-4-hydroxynaphthalene-2-sulphonic acid (CAS RN 90-51-7) 0 % - 31.12.2024
0.2704 ex 2922 21 00 40 7-Amino-4-hydroxynaphthalene-2-sulphonic acid (CAS RN 87-02-5) 0 % - 31.12.2023
0.3873 ex 2922 21 00 50 Sodium hydrogen 4-amino-5-hydroxynaphthalene-2,7-disulphonate (CAS RN 5460-09-3) 0 % - 31.12.2024
0.5997 ex 2922 21 00 60 4-Amino-5-hydroxynaphthalene-2,7-disulphonic acid with a purity by weight of 80 % or more (CAS RN 90-20-0) 0 % - 31.12.2023
0.2702 ex 2922 29 00 20 3-Aminophenol (CAS RN 591-27-5) 0 % - 31.12.2023
0.3982 ex 2922 29 00 25 5-Amino-o-cresol (CAS RN 2835-95-2) 0 % - 31.12.2023
0.6624 ex 2922 29 00 30 1,2-Bis(2-aminophenoxy)ethane (CAS RN 52411-34-4) 0 % - 31.12.2025
0.7642 ex 2922 29 00 33 o-Phenetidine (CAS RN 94-70-2) 0 % - 31.12.2023
0.2936 ex 2922 29 00 45 Anisidines 0 % - 31.12.2023
0.6634 ex 2922 29 00 63 Aclonifen (ISO) (CAS RN 74070-46-5) with a purity by weight of 97 % or more 0 % - 31.12.2025
0.4627 ex 2922 29 00 65 4-Trifluoromethoxyaniline (CAS RN 461-82-5) 0 % - 31.12.2024
0.7481 ex 2922 29 00 67 4-Chloro-2,5-dimethoxyaniline (CAS RN 6358-64-1) 0 % - 31.12.2023
0.2692 ex 2922 29 00 70 4-Nitro-o-anisidine (CAS RN 97-52-9) 0 % - 31.12.2023
0.7026 ex 2922 29 00 73 Tris(4-aminophenyl) thiophosphate (CAS RN 52664-35-4) 0 % - 31.12.2026
0.4956 ex 2922 29 00 75 4-(2-Aminoethyl)phenol (CAS RN 51-67-2) 0 % - 31.12.2025
0.2696 ex 2922 29 00 80 3-Diethylaminophenol (CAS RN 91-68-9) 0 % - 31.12.2023
0.5898 ex 2922 29 00 85 4-Benzyloxyaniline hydrochloride (CAS RN 51388-20-6) 0 % - 31.12.2023
0.2690 ex 2922 39 00 10 1-Amino-4-bromo-9,10-dioxoanthracene-2-sulphonic acid and its salts 0 % - 31.12.2023
0.7371 ex 2922 39 00 15 2-Amino-3,5-dibromobenzaldehyde (CAS RN 50910-55-9) 0 % - 31.12.2022
0.4914 ex 2922 39 00 20 2-Amino-5-chlorobenzophenone (CAS RN 719-59-5) 0 % - 31.12.2025
0.7713 ex 2922 39 00 30 (2-Fluorophenyl)-[2-(methylamino)-5-nitrophenyl]methanone (CAS RN 735-06-8) 0 % - 31.12.2024
0.6761 ex 2922 39 00 35 5-Chloro-2-(methylamino)benzophenone (CAS RN 1022-13-5) 0 % - 31.12.2025
0.7800 ex 2922 39 00 40 4,4'-Bis(diethylamino)benzophenone (CAS RN 90-93-7) 0 % - 31.12.2024
0.3546 ex 2922 43 00 10 Anthranilic acid (CAS RN 118-92-3) 0 % - 31.12.2023
0.3547 ex 2922 49 85 10 Ornithine aspartate (INNM) (CAS RN 3230-94-2) 0 % - 31.12.2023
0.7853 ex 2922 49 85 13 Benzyl glycinate-4-methylbenzene-1-sulfonic acid (1/1) (CAS RN 1738-76-7) with a purity by weight of 93 % or more 0 % - 31.12.2024
0.5037 ex 2922 49 85 17 Glycine (CAS RN 56-40-6) with a purity by weight of 95 % or more, whether or not with not more than 5 % addition of anti-caking agent silicon dioxide (CAS RN 112926-00-8) 0 % - 31.12.2025
0.5619 ex 2922 49 85 20 3-Amino-4-chlorobenzoic acid (CAS RN 2840-28-0) 0 % - 31.12.2022
0.8162 ex 2922 49 85 23 2-Ethylhexyl 4-aminobenzoate (CAS RN 26218-04-2) with a purity by weight of 99 % or more 0 % - 31.12.2026
0.6340 ex 2922 49 85 25 Dimethyl 2-aminobenzene-1,4-dicarboxylate (CAS RN 5372-81-6) 0 % - 31.12.2024
0.6948 ex 2922 49 85 30 Aqueous solution containing 40 % by weight or more of sodium methylaminoacetate (CAS RN 4316-73-8) 0 % - 31.12.2022
0.8234 ex 2922 49 85 33 4-Amino-2-chlorobenzoic acid (CAS RN 2457-76-3) with a purity by weight of 98 % or more 0 % - 31.12.2026
0.3544 ex 2922 49 85 40 Norvaline 0 % - 31.12.2023
0.8236 ex 2922 49 85 43 (E)-Ethyl 4-(dimethylamino)but-2-enoate maleate (CAS RN 1690340-79-4) with a purity by weight of 98 % or more 0 % - 31.12.2026
0.3983 ex 2922 49 85 50 D-(-)-Dihydrophenylglycine (CAS RN 26774-88-9) 0 % - 31.12.2024
0.4239 ex 2922 49 85 60 Ethyl-4-dimethylaminobenzoate (CAS RN 10287-53-3) 0 % - 31.12.2022
0.6650 ex 2922 49 85 65 Diethyl aminomalonate hydrochloride (CAS RN 13433-00-6) 0 % - 31.12.2025
0.4426 ex 2922 49 85 70 2-Ethylhexyl-4-dimethylaminobenzoate (CAS RN 21245-02-3) 0 % - 31.12.2023
0.7254 ex 2922 49 85 75 L-alanine isopropyl ester hydrochloride (CAS RN 62062-65-1) 0 % - 31.12.2022
0.6100 ex 2922 49 85 80 12-Aminododecanoic acid (CAS RN 693-57-2) 0 % - 31.12.2023
0.7020 ex 2922 50 00 10 2-(2-(2-Aminoethoxy)ethoxy)acetic acid hydrochloride (CAS RN 134979-01-4) 0 % - 31.12.2026
0.7257 ex 2922 50 00 15 3,5-Diiodothyronine (CAS RN 1041-01-6) 0 % - 31.12.2022
0.4702 ex 2922 50 00 20 1-[2-Amino-1-(4-methoxyphenyl)-ethyl]-cyclohexanol hydrochloride (CAS RN 130198-05-9) 0 % - 31.12.2024
0.7523 ex 2922 50 00 35 (2S)-2-Amino-3-(3,4-dimethoxyphenyl)-2-methylpropanoic acid hydrochloride (CAS RN 5486-79-3) 0 % - 31.12.2023
0.2681 ex 2922 50 00 70 2-(1-Hydroxycyclohexyl)-2-(4-methoxyphenyl)ethylammonium acetate 0 % - 31.12.2023
0.6226 ex 2923 10 00 10 Calcium phosphoryl choline chloride tetrahydrate (CAS RN 72556-74-2) 0 % - 31.12.2024
0.3543 ex 2923 90 00 10 Tetramethylammonium hydroxide, in the form of an aqueous solution containing 25 % (± 0,5 %) by weight of tetramethylammonium hydroxide 0 % - 31.12.2023
0.4499 ex 2923 90 00 25 Tetrakis(dimethylditetradecylammonium) molybdate (CAS RN 117342-25-3) 0 % - 31.12.2023
0.8159 ex 2923 90 00 30 Tetrabutylammonium tetrahydroborate (CAS RN 33725-74-5) with a purity by weight of 97 % or more 0 % - 31.12.2026
0.7879 ex 2923 90 00 50 Betaine hydrochloride (CAS RN 590-46-5), with a purity by weight of 93 % or more 0 % - 31.12.2024
0.7089 ex 2923 90 00 55 Tetrabutylammonium bromide (CAS RN 1643-19-2) 0 % - 31.12.2026
0.7615 ex 2923 90 00 65 N,N,N-trimethyl-tricyclo[3.3.1.13,7]decan-1-aminium hydroxide (CAS RN 53075-09-5) in form of an aqueous solution with a content of N,N,N-trimethyl-tricyclo[3.3.1.13,7]decan-1-aminium hydroxide by weight of 17,5 % or more but not more than 27,5 % 0 % - 31.12.2023
0.3538 ex 2923 90 00 70 Tetrapropylammonium hydroxide, in the form of an aqueous solution containing: — 40 % (± 2 %) by weight of tetrapropylammonium hydroxide, — 0,3 % by weight or less of carbonate, — 0,1 % by weight or less of tripropylamine, — 500 mg/kg or less of bromide and — 25 mg/kg or less of potassium and sodium taken together 0 % - 31.12.2023
0.5063 ex 2923 90 00 75 Tetraethylammonium hydroxide, in the form of an aqueous solution containing: — 35 % (± 0,5 %) by weight of tetraethylammonium hydroxide, — not more than 1 000  mg/kg of chloride, — not more than 2 mg/kg of iron, and — not more than 10 mg/kg of potassium 0 % - 31.12.2025
0.3536 ex 2923 90 00 80 Diallyldimethylammonium chloride (CAS RN 7398-69-8) , in the form of an aqueous solution containing by weight 63 % or more but not more than 67 % of diallyldimethylammonium chloride 0 % - 31.12.2023
0.6410 ex 2923 90 00 85 N,N,N-Trimethylanilinium chloride (CAS RN 138-24-9) 0 % - 31.12.2024
0.2678 ex 2924 19 00 10 2-Acrylamido-2-methylpropanesulphonic acid (CAS RN 15214-89-8) or its sodium salt (CAS RN 5165-97-9), or its ammonium salt (CAS RN 58374-69-9) 0 % - 31.12.2023
0.6227 ex 2924 19 00 15 N-Ethyl N-methylcarbamoyl chloride (CAS RN 42252-34-6) 0 % - 31.12.2024
0.8000 ex 2924 19 00 18 2-(((Butylamino)carbonyl)oxy)ethyl acrylate (CAS RN 63225-53-6) with a purity by weight of 97 % or more 0 % - 31.12.2025
0.7258 ex 2924 19 00 25 Isobutylidenediurea (CAS RN 6104-30-9) 0 % - 31.12.2022
0.8027 ex 2924 19 00 28 (2S)-2-amino-5-(carbamoylamino)pentanoic acid ; 2-hydroxybutanedioic acid (2:1) (CAS RN 54940-97-5) with a purity by weight of 98 % or more 0 % - 31.12.2025
0.3535 ex 2924 19 00 30 Methyl 2-acetamido-3-chloropropionate (CAS RN 87333-22-0) 0 % - 31.12.2023
0.8030 ex 2924 19 00 33 (2S)-2-amino-5-(carbamoylamino)pentanoic acid ; 2-hydroxybutanedioic acid (1:1) (CAS RN 70796-17-7) with a purity by weight of 98,5 % or more 0 % - 31.12.2025
0.6549 ex 2924 19 00 35 Acetamide (CAS RN 60-35-5) 0 % - 31.12.2024
0.8041 ex 2924 19 00 38 Diethyl acetamidomalonate (CAS RN 1068-90-2) with a purity by weight of 98 % or more 0 % - 31.12.2025
0.8049 ex 2924 19 00 43 N6-(tert-butoxycarbonyl)-L-lysine methyl ester hydrochloride (CAS RN 2389-48-2) with a purity by weight of 98 % or more 0 % - 31.12.2025
0.8283 ex 2924 19 00 48 N,N-Dimethylcarbamoyl chloride (CAS RN 79-44-7) with a purity by weight of 99 % or more 0 % - 31.12.2026
0.7060 ex 2924 19 00 55 2-Propynyl butylcarbamate (CAS RN 76114-73-3) 0 % - 31.12.2026
0.4160 ex 2924 19 00 60 N,N-Dimethylacrylamide (CAS RN 2680-03-7) 0 % - 31.12.2026
0.7482 ex 2924 19 00 65 2,2,2-trifluoroacetamide (CAS RN 354-38-1) 0 % - 31.12.2023
0.4380 ex 2924 19 00 70 Methylcarbamate (CAS RN 598-55-0) 0 % - 31.12.2023
0.7575 ex 2924 19 00 75 (S)-4-((tert-Butoxycarbonyl)amino)-2-hydroxybutanoic acid (CAS RN 207305-60-0) 0 % - 31.12.2023
0.5605 ex 2924 19 00 80 Tetrabutylurea (CAS RN 4559-86-8) 0 % - 31.12.2022
0.2939 ex 2924 21 00 10 4,4'-Dihydroxy-7,7'-ureylenedi(naphthalene-2-sulfonic acid) and its sodium salts 0 % - 31.12.2023
0.5998 ex 2924 21 00 20 (3-Aminophenyl)urea hydrochloride (CAS RN 59690-88-9) 0 % - 31.12.2024
0.3533 2924 25 00 Alachlor (ISO), (CAS RN 15972-60-8) 0 % - 31.12.2023
0.6047 ex 2924 29 70 12 4-(Acetylamino)-2-aminobenzenesulphonic acid (CAS RN 88-64-2) 0 % - 31.12.2024
0.3534 ex 2924 29 70 15 Acetochlor (ISO), (CAS RN 34256-82-1) 0 % - 31.12.2023
0.6266 ex 2924 29 70 17 2-(Trifluoromethyl)benzamide (CAS RN 360-64-5) 0 % - 31.12.2024
0.6363 ex 2924 29 70 19 2-[[2-(Benzyloxycarbonylamino)acetyl]amino]propionic acid (CAS RN 3079-63-8) 0 % - 31.12.2024
0.4685 ex 2924 29 70 20 2-Chloro-N-(2-ethyl-6-methylphenyl)-N-(propan-2-yloxymethyl)acetamide (CAS RN 86763-47-5) 0 % - 31.12.2024
0.6568 ex 2924 29 70 23 Benalaxyl-M (ISO) (CAS RN 98243-83-5) 0 % - 31.12.2024
0.8153 ex 2924 29 70 25 2-[2-(Methoxycarbonyl-phenyl-amino)-phenyl]-acetic acid (CAS RN 353497-35-5) with a purity by weight of 98 % or more 0 % - 31.12.2026
0.7118 ex 2924 29 70 30 Sodium 4-(4-methyl-3-nitrobenzoylamino)benzenesulphonate (CAS RN 84029-45-8) 0 % - 31.12.2026
0.8235 ex 2924 29 70 32 N-(4-Amino-2-ethoxyphenyl)acetamide (CAS RN 848655-78-7) with a purity by weight of 98 % or more 0 % - 31.12.2026
0.8161 ex 2924 29 70 35 N-(1,1-Dimethylethyl)-4-amino-benzamide (CAS RN 93483-71-7) with a purity by weight of 99 % or more 0 % - 31.12.2026
0.8258 ex 2924 29 70 36 N,N'-(2-Chloro-5-methyl-1,4-phenylene)bis[3-oxobutyramide] (CAS RN 41131-65-1) with a purity by weight of 97 % or more 0 % - 31.12.2026
0.6110 ex 2924 29 70 37 Beflubutamid (ISO) (CAS RN 113614-08-7) 0 % - 31.12.2023
0.5066 ex 2924 29 70 40 N,N'-1,4-Phenylenebis[3-oxobutyramide], (CAS RN 24731-73-5) 0 % - 31.12.2025
0.5127 ex 2924 29 70 45 Propoxur (ISO) (CAS RN 114-26-1) 0 % - 31.12.2025
0.8183 ex 2924 29 70 46 S-Metolachlor (ISO) (CAS RN 87392-12-9) with a purity by weight of 98 % or more 0 % - 31.12.2026
0.7841 ex 2924 29 70 47 (S)-tert-butyl (1-amino-3-(4-iodophenyl)-1-oxopropan-2-yl)carbamate (CAS RN 868694-44-4) with a purity by weight of 95 % or more 0 % - 31.12.2024
0.8184 ex 2924 29 70 52 Zoxamide (ISO) (CAS RN 156052-68-5) with a purity by weight of 97 % or more 0 % - 31.12.2026
0.5622 ex 2924 29 70 53 4-Amino-N-[4-(aminocarbonyl)phenyl]benzamide (CAS RN 74441-06-8) 0 % - 31.12.2022
0.5069 ex 2924 29 70 55 N,N'-(2,5-Dimethyl-1,4-phenylene)bis[3-oxobutyramide] (CAS RN 24304-50-5) 0 % - 31.12.2025
0.8043 ex 2924 29 70 58 2-chloro-N-[1-(4-chloro-3-fluorophenyl)-2-methylpropan-2-yl]acetamide (CAS RN 787585-35-7) with a purity by weight of 98 % or more 0 % - 31.12.2025
0.6767 ex 2924 29 70 62 2-Chlorobenzamide (CAS RN 609-66-5) 0 % - 31.12.2025
0.5388 ex 2924 29 70 63 N-Ethyl-2-(isopropyl)-5-methylcyclohexanecarboxamide (CAS RN 39711-79-0) 0 % - 31.12.2022
0.6766 ex 2924 29 70 64 N-(3',4'-dichloro-5-fluoro[1,1'-biphenyl]-2-yl)acetamide (CAS RN 877179-03-8) 0 % - 31.12.2025
0.7632 ex 2924 29 70 67 N,N'-(2,5-Dichloro-1,4-phenylene)bis[3-oxobutyramide] (CAS RN 42487-09-2) 0 % - 31.12.2023
0.7582 ex 2924 29 70 70 N-[(benzyloxy)carbonyl]glycyl-N-[(2S)-1-{4-[(tert-butoxycarbonyl)oxy]phenyl}-3-hydroxypropan-2-yl]-L-alaninamide 0 % - 31.12.2023
0.6480 ex 2924 29 70 73 Napropamide (ISO) (CAS RN 15299-99-7) 0 % - 31.12.2024
0.2672 ex 2924 29 70 75 3-Amino-p-anisanilide (CAS RN 120-35-4) 0 % - 31.12.2023
0.8060 ex 2924 29 70 78 5-amino-3-(4-chlorophenyl)-5-oxopentanoic acid (CAS RN 1141-23-7) with a purity by weight of 98 % or more 0 % - 31.12.2025
0.2673 ex 2924 29 70 85 p-Aminobenzamide (CAS RN 2835-68-9) 0 % - 31.12.2023
0.4257 ex 2924 29 70 86 Anthranilamide (CAS RN 88-68-6) of a purity by weight of 99,5 % or more 0 % - 31.12.2022
0.4495 ex 2924 29 70 88 5'-Chloro-3-hydroxy-2'-methyl-2-naphthanilide (CAS RN 135-63-7) 0 % - 31.12.2023
0.4493 ex 2924 29 70 89 Flutolanil (ISO) (CAS RN 66332-96-5) 0 % - 31.12.2023
0.3690 ex 2924 29 70 91 3-Hydroxy-2'-methoxy-2-naphthanilide (CAS RN 135-62-6) 0 % - 31.12.2023
0.3691 ex 2924 29 70 92 3-Hydroxy-2-naphthanilide (CAS RN 92-77-3) 0 % - 31.12.2024
0.3692 ex 2924 29 70 93 3-Hydroxy-2'-methyl-2-naphthanilide (CAS RN 135-61-5) 0 % - 31.12.2023
0.3693 ex 2924 29 70 94 2'-Ethoxy-3-hydroxy-2-naphthanilide (CAS RN 92-74-0) 0 % - 31.12.2023
0.3863 ex 2924 29 70 97 1,1-Cyclohexanediacetic acid monoamide (CAS RN 99189-60-3) 0 % - 31.12.2023
0.3526 ex 2925 11 00 20 Saccharin and its sodium salt 0 % - 31.12.2023
0.2674 ex 2925 19 95 10 N-Phenylmaleimide (CAS RN 941-69-5) 0 % - 31.12.2023
0.5612 ex 2925 19 95 20 4,5,6,7-Tetrahydroisoindole-1,3-dione (CAS RN 4720-86-9) 0 % - 31.12.2022
0.5740 ex 2925 19 95 30 N,N'-(m-Phenylene)dimaleimide (CAS RN 3006-93-7) 0 % - 31.12.2022
0.8013 ex 2925 19 95 40 N-Iodosuccinimide (CAS RN 516-12-1) with a purity by weight of 98,5 % or more 0 % - 31.12.2025
0.2934 ex 2925 29 00 10 Dicyclohexylcarbodiimide (CAS RN 538-75-0) 0 % - 31.12.2023
0.5891 ex 2925 29 00 20 N-[3-(Dimethylamino)propyl]-N'-ethylcarbodiimide hydrochloride (CAS RN 25952-53-8) 0 % - 31.12.2023
0.7749 ex 2925 29 00 40 N-amidinosarcosine (CAS RN 57-00-1) 0 % - 31.12.2024
0.7832 ex 2925 29 00 50 (Chloromethylene)dimethyliminium chloride (CAS RN 3724-43-4) with a purity by weight of 95 % or more 0 % - 31.12.2024
0.8033 ex 2925 29 00 60 Formamidine acetate (CAS RN 3473-63-0) with a purity by weight of 99 % or more 0 % - 31.12.2025
0.8040 ex 2925 29 00 70 Bromomethylidene(dimethyl)azanium bromide (CAS RN 24774-61-6) with a purity by weight of 97 % or more 0 % - 31.12.2025
0.7430 ex 2926 90 70 15 2-Cyclohexylidene-2-phenylacetonitrile (CAS RN 10461-98-0) 0 % - 31.12.2022
0.6258 ex 2926 90 70 16 4-Cyano-2-nitrobenzoic acid methyl ester (CAS RN 52449-76-0) 0 % - 31.12.2024
0.6934 ex 2926 90 70 17 Cypermethrin (ISO) with its stereoisomers (CAS RN 52315-07-8) with a purity by weight of 90 % or more 0 % - 31.12.2025
0.7408 ex 2926 90 70 18 Flumethrin (ISO) (CAS RN 69770-45-2) 0 % - 31.12.2022
0.7466 ex 2926 90 70 19 2-(4-amino-2-chloro-5-methylphenyl)-2-(4-chlorophenyl) acetonitrile (CAS RN 61437-85-2) 0 % - 31.12.2023
0.2668 ex 2926 90 70 20 2-(m-Benzoylphenyl)propiononitrile (CAS RN 42872-30-0) 0 % - 31.12.2024
0.7458 ex 2926 90 70 21 4-Bromo-2-chlorobenzonitrile (CAS RN 154607-01-9) 0 % - 31.12.2023
0.7514 ex 2926 90 70 22 Acetonitrile (CAS RN 75-05-8) 0 % - 31.12.2023
0.6109 ex 2926 90 70 23 Acrinathrin (ISO) (CAS RN 101007-06-1) 0 % - 31.12.2023
0.7805 ex 2926 90 70 24 2-Hydroxy-2-methylpropiononitrile (CAS RN 75-86-5) with a purity by weight of 99 % or more 0 % - 31.12.2024
0.5227 ex 2926 90 70 25 2,2-Dibromo-3-nitrilopropionamide (CAS RN 10222-01-2) 0 % - 31.12.2026
0.6259 ex 2926 90 70 26 Cyfluthrin (ISO) (CAS RN 68359-37-5) with a purity by weight of 95,5 % or more for the use in the manufacture of biocidal products (1) 0 % - 31.12.2024
0.6149 ex 2926 90 70 27 Cyhalofop-butyl (ISO) (CAS RN 122008-85-9) 0 % - 31.12.2023
0.7201 ex 2926 90 70 30 4,5-Dichloro-3,6-dioxocyclohexa-1,4-diene-1,2-dicarbonitrile (CAS RN 84-58-2) 0 % - 31.12.2026
0.7406 ex 2926 90 70 33 Deltamethrin (ISO) (CAS RN 52918-63-5) 0 % - 31.12.2022
0.7034 ex 2926 90 70 35 4-Cyano-2-methoxybenzaldehyde (CAS RN 21962-45-8) 0 % - 31.12.2026
0.6970 ex 2926 90 70 40 2-(4-Cyanophenylamino)acetic acid (CAS RN 42288-26-6) 0 % - 31.12.2023
0.3522 ex 2926 90 70 50 Alkyl or alkoxyalkyl esters of cyanoacetic acid 0 % - 31.12.2023
0.8217 ex 2926 90 70 56 Methyl 2-cyano-2-propylpentanoate (CAS RN 66546-92-7) with a purity by weight of 97 % or more 0 % - 31.12.2026
0.4182 ex 2926 90 70 61 m-(1-Cyanoethyl)benzoic acid (CAS RN 5537-71-3) 0 % - 31.12.2026
0.4644 ex 2926 90 70 64 Esfenvalerate (CAS RN 66230-04-4) of a purity by weight of 83 % or more in a mixture of its own isomers 0 % - 31.12.2024
0.4802 ex 2926 90 70 70 Methacrylonitrile (CAS RN 126-98-7) 0 % - 31.12.2024
0.2543 ex 2926 90 70 74 Chlorothalonil (ISO) (CAS RN 1897-45-6) 0 % - 31.12.2024
0.3521 ex 2926 90 70 75 Ethyl 2-cyano-2-ethyl-3-methylhexanoate (CAS RN 100453-11-0) 0 % - 31.12.2024
0.3516 ex 2926 90 70 80 Ethyl 2-cyano-2-phenylbutyrate (CAS RN 718-71-8) 0 % - 31.12.2023
0.3514 ex 2926 90 70 86 Ethylenediaminetetraacetonitrile (CAS RN 5766-67-6) 0 % - 31.12.2023
0.3515 ex 2926 90 70 89 Butyronitrile (CAS RN 109-74-0) 0 % - 31.12.2023
0.2667 ex 2927 00 00 10 2,2'-Dimethyl-2,2'-azodipropionamidine dihydrochloride 0 % - 31.12.2023
0.2665 ex 2927 00 00 20 4-Anilino-2-methoxybenzenediazonium hydrogen sulphate (CAS RN 36305-05-2) 0 % - 31.12.2023
0.7337 ex 2927 00 00 25 2,2'-azobis(4-methoxy-2,4-dimethylvaleronitrile) (CAS RN 15545-97-8) 0 % - 31.12.2022
0.2810 ex 2927 00 00 30 4'-Aminoazobenzene-4-sulphonic acid (CAS RN 104-23-4) 0 % - 31.12.2023
0.6306 ex 2927 00 00 35 C.C'-Azodi(formamide) (CAS RN 123-77-3) in the form of yellow powder with a decomposition temperature of 180°C or more but not more than 220°C used as a foaming agent in the manufacture of thermoplastic resins, elastomer and cross-linked polythene foam 0 % - 31.12.2024
0.3984 ex 2927 00 00 60 4,4'-Dicyano-4,4'-azodivaleric acid (CAS RN 2638-94-0) 0 % - 31.12.2023
0.5626 ex 2927 00 00 80 4-[(2,5-Dichlorophenyl)azo]-3-hydroxy-2-naphthoic acid (CAS RN 51867-77-7) 0 % - 31.12.2022
0.2661 ex 2928 00 90 10 3,3’-Bis(3,5-di-tert-butyl-4-hydroxyphenyl)-N,N'-bipropionamide (CAS RN 32687-78-8) 0 % - 31.12.2023
0.6479 ex 2928 00 90 13 Cymoxanil (ISO) (CAS RN 57966-95-7) 0 % - 31.12.2024
0.6548 ex 2928 00 90 18 Acetone oxime (CAS RN 127-06-0) of a purity by weight of 99 % or more 0 % - 31.12.2024
0.6871 ex 2928 00 90 23 Metobromuron (ISO) (CAS RN 3060-89-7) with a purity by weight of 98 % or more 0 % - 31.12.2025
0.4929 ex 2928 00 90 25 Acetaldehyde oxime (CAS RN 107-29-9) in an aqueous solution 0 % - 31.12.2025
0.6985 ex 2928 00 90 28 Pentan-2-one oxime (CAS RN 623-40-5) 0 % - 31.12.2026
0.5438 ex 2928 00 90 30 N-Isopropylhydroxylamine (CAS RN 5080-22-8) 0 % - 31.12.2026
0.7448 ex 2928 00 90 33 4- Chlorophenylhydrazine Hydrochloride (CAS RN 1073-70-7) 0 % - 31.12.2023
0.8061 ex 2928 00 90 38 Aqueous solution of methoxyammonium chloride (CAS-RN 593-56-6), containing by weight: — 30 % or more but not more than 40 % of methoxyammonium chloride — not more than 4 % of hydrochloric acid 0 % - 31.12.2025
0.2659 ex 2928 00 90 40 O-Ethylhydroxylamine, in the form of an aqueous solution (CAS RN 624-86-2) 0 % - 31.12.2023
0.8093 ex 2928 00 90 43 2-(3-methoxy-3-oxopropyl)-1,1,1-trimethylhydrazinium bromide (CAS RN 106966-25-0) with a purity by weight of 99 % or more 0 % - 31.12.2025
0.5919 ex 2928 00 90 45 Tebufenozide (ISO) (CAS RN 112410-23-8) 0 % - 31.12.2023
0.8158 ex 2928 00 90 48 1-{[(1H-Fluoren-9-ylmetoxi)carbonil]oxi}pyrrolidine-2,5-dione (CAS RN 82911-69-1) with a purity by weight of 98 % or more 0 % - 31.12.2026
0.6635 ex 2928 00 90 50 Aqueous solution of 2,2'-(hydroxyimino) bisethanesulphonic acid disodium salt (CAS RN 133986-51-3) with a content by weight of more than 33,5 % but not more than 36,5 % 0 % - 31.12.2025
0.5918 ex 2928 00 90 55 Aminoguanidinium hydrogen carbonate (CAS RN 2582-30-1) 0 % - 31.12.2023
0.6364 ex 2928 00 90 65 2-Amino-3-(4-hydroxyphenyl) propanal semicarbazone hydrochloride 0 % - 31.12.2024
0.4544 ex 2928 00 90 70 Butanone oxime (CAS RN 96-29-7) 0 % - 31.12.2023
0.5228 ex 2928 00 90 75 Metaflumizone (ISO) (CAS RN 139968-49-3) 0 % - 31.12.2026
0.3510 ex 2928 00 90 80 Cyflufenamid (ISO) (CAS RN 180409-60-3) 0 % - 31.12.2023
0.4714 ex 2929 10 00 15 3,3'-Dimethylbiphenyl-4,4'-diyl diisocyanate (CAS RN 91-97-4) 0 % - 31.12.2024
0.5827 ex 2929 10 00 20 Butyl isocyanate (CAS RN 111-36-4) 0 % - 31.12.2022
0.2660 ex 2929 10 00 40 m-Isopropenyl-α,α-dimethylbenzyl isocyanate (CAS RN 2094-99-7) 0 % - 31.12.2023
0.2657 ex 2929 10 00 50 m-Phenylenediisopropylidene diisocyanate (CAS RN 2778-42-9) 0 % - 31.12.2023
0.5033 ex 2929 10 00 55 2,5 (and 2,6)-Bis(isocyanatomethyl)bicyclo[2.2.1]heptane (CAS RN 74091-64-8) 0 % - 31.12.2022
0.3509 ex 2929 10 00 60 Trimethylhexamethylene diisocyanate, mixed isomers 0 % - 31.12.2023
0.4188 ex 2929 10 00 80 1,3-Bis(isocyanatomethyl)benzene (CAS RN 3634-83-1) 0 % - 31.12.2022
0.8171 ex 2929 90 00 40 N-Butylphosphorothioic triamide (CAS RN 94317-64-3) with a purity by weight of 97 % or more 0 % - 31.12.2026
0.8172 ex 2929 90 00 50 N-Propylphosphorothioic triamide (CAS RN 916809-14-8) with a purity by weight of 97 % or more 0 % - 31.12.2026
0.5278 ex 2930 20 00 20 2-Isopropylethylthiocarbamate (CAS RN 141-98-0) 0 % - 31.12.2022
0.4298 ex 2930 20 00 40 Prosulfocarb (ISO) (CAS RN 52888-80-9) with purity by weight of 97 % or more 0 % - 31.12.2022
0.5035 ex 2930 90 98 10 2,3-Bis((2-mercaptoethyl)thio)-1-propanethiol (CAS RN 131538-00-6) 0 % - 31.12.2022
0.8036 ex 2930 90 98 11 Benzyl (2S)-2-amino-3-[3-(methanesulphonylphenyl)]propanoate hydrochloride (CAS RN 1194550-59-8) with a purity by weight of 98 % or more 0 % - 31.12.2025
0.7483 ex 2930 90 98 12 4,4'-Sulfonyldiphenol (CAS RN 80-09-1) used in the manufacture of polyarylsulfones or polyarylethersulfones (1) 0 % - 31.12.2023
0.5390 ex 2930 90 98 13 Mercaptamine hydrochloride (CAS RN 156-57-0) 0 % - 31.12.2022
0.8047 ex 2930 90 98 14 (E)-N'-(2-Cyano-4-(3-(1-hydroxy-2-methylpropan-2-yl)thioureido)phenyl)-N,N-dimethyl-formimidamide (CAS RN 1429755-57-6) with a purity by weight of 98 % or more 0 % - 31.12.2025
0.2932 ex 2930 90 98 15 Ethoprophos (ISO) (CAS RN 13194-48-4) 0 % - 31.12.2023
0.6551 ex 2930 90 98 16 3-(Dimethoxymethylsilyl)-1-propanethiol (CAS RN 31001-77-1) 0 % - 31.12.2024
0.5999 ex 2930 90 98 17 2-(3-Aminophenylsulphonyl)ethyl hydrogen sulphate (CAS RN 2494-88-4) 0 % - 31.12.2024
0.7748 ex 2930 90 98 18 Dimethyl sulfone (CAS RN 67-71-0) 0 % - 31.12.2024
0.8050 ex 2930 90 98 19 4-Amino-5-(ethanesulphonyl)-2-methoxybenzoic acid (CAS RN 71675-87-1) with a purity by weight of 98 % or more 0 % - 31.12.2025
0.7799 ex 2930 90 98 20 4-(4-Methylphenylthio)benzophenone (CAS RN 83846-85-9) 0 % - 31.12.2024
0.6750 ex 2930 90 98 21 [2,2'-Thio-bis(4-tert-octylphenolato)]-n-butylamine nickel (CAS RN 14516-71-3) 0 % - 31.12.2026
0.6769 ex 2930 90 98 22 Tembotrione (ISO) (CAS RN 335104-84-2) with a purity by weight of 94,5 % or more 0 % - 31.12.2025
0.5899 ex 2930 90 98 23 Dimethyl [(methylsulphanyl)methylylidene]biscarbamate (CAS RN 34840-23-8) 0 % - 31.12.2023
0.7714 ex 2930 90 98 24 Phenyl vinyl sulfone (CAS RN 5535-48-8) 0 % - 31.12.2024
0.2930 ex 2930 90 98 25 Thiophanate-methyl (ISO), (CAS RN 23564-05-8) 0 % - 31.12.2023
0.6873 ex 2930 90 98 26 Folpet (ISO)(CAS RN 133-07-3) with a purity by weight of 97,5 % or more 0 % - 31.12.2025
0.6585 ex 2930 90 98 27 2-[(4-Amino-3-methoxyphenyl)sulphonyl]ethyl hydrogen sulphate (CAS RN 26672-22-0) 0 % - 31.12.2024
0.8069 ex 2930 90 98 28 Mesotrione (ISO) (CAS RN 104206-82-8) in form of wet cake or wet paste or in its crystalline form, with — a purity of 74 % or more by weight and, — a maximum water content of 23 % by weight 0 % - 31.12.2025
0.7859 ex 2930 90 98 29 4-amino-5-(ethylsulfanyl)-2-methoxybenzoic acid (CAS RN 71675-86-0) with a purity by weight of 98 % or more 0 % - 31.12.2024
0.2933 ex 2930 90 98 30 4-(4-Isopropoxyphenylsulphonyl)phenol (CAS RN 95235-30-6) 0 % - 31.12.2023
0.7833 ex 2930 90 98 31 (p-toluenesulphonyl)methyl isocyanide (CAS RN 36635-61-7) with a purity by weight of 98 % or more 0 % - 31.12.2024
0.8152 ex 2930 90 98 32 2-Methoxy-N-[2-nitro-5-(phenylsulfanyl)phenyl]acetamide (CAS RN 63470-85-9) with a purity by weight of 96 % or more 0 % - 31.12.2026
0.6584 ex 2930 90 98 33 2-Amino-5-{[2-(sulfooxy)ethyl]sulfonyl}benzenesulfonIc acid (CAS RN 42986-22-1) 0 % - 31.12.2024
0.3811 ex 2930 90 98 35 Glutathione (CAS RN 70-18-8) 0 % - 31.12.2026
0.7682 ex 2930 90 98 38 Allyl isothiocyanate (CAS RN 57-06-7) 0 % - 31.12.2023
0.2928 ex 2930 90 98 40 3,3’-Thiodi(propionic acid) (CAS RN 111-17-1) 0 % - 31.12.2023
0.6167 ex 2930 90 98 43 Trimethylsulfoxonium iodide (CAS RN 1774-47-6) 0 % - 31.12.2023
0.2931 ex 2930 90 98 45 2-[(p-Aminophenyl)sulphonyl]ethyl hydrogen sulphate (CAS RN 2494-89-5) 0 % - 31.12.2024
0.7689 ex 2930 90 98 50 3-Mercaptopropionic acid (CAS RN 107-96-0) 0 % - 31.12.2023
0.6617 ex 2930 90 98 53 Bis(4-chlorophenyl) sulphone (CAS RN 80-07-9) 0 % - 31.12.2025
0.5114 ex 2930 90 98 55 Thiourea (CAS RN 62-56-6) 0 % - 31.12.2025
0.2929 ex 2930 90 98 60 Methyl phenyl sulphide (CAS RN 100-68-5) 0 % - 31.12.2023
0.4629 ex 2930 90 98 64 3-Chloro-2-methylphenyl methyl sulphide (CAS RN 82961-52-2) 0 % - 31.12.2024
0.5034 ex 2930 90 98 65 Pentaerythritol tetrakis(3-mercaptopropionate) (CAS RN 7575-23-7) 0 % - 31.12.2022
0.4296 ex 2930 90 98 68 Clethodim (ISO) (CAS RN 99129-21-2) 0 % - 31.12.2022
0.3986 ex 2930 90 98 77 4-[4-(2-Propenyloxy)phenylsulphonyl]phenol (CAS RN 97042-18-7) 0 % - 31.12.2023
0.4187 ex 2930 90 98 78 4-Mercaptomethyl-3,6-dithia-1,8-octanedithiol (CAS RN 131538-00-6) 0 % - 31.12.2026
0.2999 ex 2930 90 98 80 Captan (ISO) (CAS RN 133-06-2) 0 % - 31.12.2023
0.4694 ex 2930 90 98 81 Disodium hexamethylene-1,6-bisthiosulfate dihydrate (CAS RN 5719-73-3) 3 % - 31.12.2024
0.7985 ex 2930 90 98 88 1-{4-[(4-Benzoylphenyl)sulphanyl]phenyl}-2-methyl-2-[(4-methylphenyl)sulphonyl]propan-1-one (CAS RN 272460-97-6) with a purity by weight of 94 % or more 0 % - 31.12.2025
0.4094 ex 2930 90 98 89 Potassium- or sodium-salt of O-ethyl-, O-isopropyl-, O-butyl-, O-isobutyl- or O-pentyl-dithiocarbonates 0 % - 31.12.2026
0.7070 ex 2930 90 98 93 1-Hydrazino-3-(methylthio)propan-2-ol (CAS RN 14359-97-8) 0 % - 31.12.2026
0.7078 ex 2930 90 98 95 N-(cyclohexylthio)phthalimide (CAS RN 17796-82-6) 0 % - 31.12.2026
0.7086 ex 2930 90 98 97 Diphenyl sulphone (CAS RN 127-63-9) 0 % - 31.12.2026
0.5741 ex 2931 49 90 08 Sodium diisobutyldithiophosphinate (CAS RN 13360-78-6) in an aqueous solution 0 % - 31.12.2022
0.5492 ex 2931 49 90 13 Trioctylphosphine oxide (CAS RN 78-50-2) 0 % - 31.12.2026
0.6088 ex 2931 49 90 23 Di-tert-butylphosphane (CAS RN 819-19-2) 0 % - 31.12.2023
0.5758 ex 2931 49 90 25 (Z)-Prop-1-en-1-ylphosphonic acid (CAS RN 25383-06-6) 0 % - 31.12.2022
0.3497 ex 2931 49 90 30 Bis(2,4,4-trimethylpentyl)phosphinic acid (CAS RN 83411-71-6) 0 % - 31.12.2023
0.7533 ex 2931 49 90 35 Ethyl phenyl(2,4,6-trimethylbenzoyl)phosphinate (CAS RN 84434-11-7) 0 % - 31.12.2023
0.2656 ex 2931 49 90 38 N-(Phosphonomethyl)iminodiacetic acid (CAS RN 5994-61-6) containing by weight not more than 15 % of water, and with a dry weight purity of 97 % or more 0 % - 31.12.2024
0.5229 ex 2931 49 90 40 Tetrakis(hydroxymethyl)phosphonium chloride (CAS RN 124-64-1) 0 % - 31.12.2026
0.4433 ex 2931 49 90 45 Diphenyl(2,4,6-trimethylbenzoyl)phosphine oxide (CAS RN 75980-60-8) 0 % - 31.12.2023
0.3492 ex 2931 49 90 48 Tetrabutylphosphonium acetate in the form of an aqueous solution (CAS RN 30345-49-4) 0 % - 31.12.2024
0.3987 ex 2931 49 90 55 3-(Hydroxyphenylphosphinoyl)propionic acid (CAS RN 14657-64-8) 0 % - 31.12.2023
0.7709 ex 2931 59 90 50 2-Chloroethylphosphonic acid (CAS RN 16672-87-0) solid or in aqueous solution, with a content by weight of 2-Chloroethylphosphonic acid of 65 % or more 0 % - 31.12.2024
0.3504 ex 2931 90 00 03 Butylethylmagnesium (CAS RN 62202-86-2), in the form of a solution in heptane 0 % - 31.12.2023
0.7354 ex 2931 90 00 10 (3-fluoro-5-isobutoxyphenyl)boronic acid (CAS RN 850589-57-0) 0 % - 31.12.2022
0.4515 ex 2931 90 00 15 Methylcyclopentadienyl manganese tricarbonyl (CAS RN 12108-13-3) containing not more than 4,9 % by weight of cyclopentadienyl manganese tricarbonyl 0 % - 31.12.2024
0.7320 ex 2931 90 00 20 Ferrocene (CAS RN 102-54-5) 0 % - 31.12.2022
0.8051 ex 2931 90 00 23 Ixazomib citrate (INNM) (CAS RN 1239908-20-3) with a purity by weight of 95 % or more 0 % - 31.12.2025
0.7951 ex 2931 90 00 25 N-(3-(dimethoxymethylsilyl)propyl)ethylenediamine (CAS RN 3069-29-2) with a purity by weight of 98 % or more 0 % - 31.12.2025
0.8063 ex 2931 90 00 28 Triethoxy(3-isocyanatopropyl)silane (CAS RN 24801-88-5) with a purity by weight of 96 % or more 0 % - 31.12.2025
0.8272 ex 2931 90 00 30 Tert-Butylchlorodimethylsilane (CAS RN 18162-48-6) with a purity by weight of 99 % or more 0 % - 31.12.2026
0.3499 ex 2931 90 00 33 Dimethyl[dimethylsilyldiindenyl]hafnium (CAS RN 220492-55-7) 0 % - 31.12.2024
0.2654 ex 2931 90 00 35 N,N-Dimethylanilinium tetrakis(pentafluorophenyl)borate (CAS RN 118612-00-3) 0 % - 31.12.2024
0.4121 ex 2931 90 00 50 Trimethylsilane (CAS RN 993-07-7) 0 % - 31.12.2026
0.6917 ex 2931 90 00 63 Chloroethenyldimethylsilane (CAS RN 1719-58-0) 0 % - 31.12.2022
0.6946 ex 2931 90 00 65 Bis(4-tert-butylphenyl)iodonium hexafluorophosphate (CAS RN 61358-25-6) 0 % - 31.12.2022
0.3486 ex 2932 13 00 10 Tetrahydrofurfuryl alcohol (CAS RN 97-99-4) 0 % - 31.12.2023
0.4590 ex 2932 14 00 10 1,6-Dichloro-1,6-dideoxy-β-D-fructofuranosyl-4-chloro-4-deoxy-α-D-galactopyranoside (CAS RN 56038-13-2) 0 % - 31.12.2024
0.3488 ex 2932 19 00 40 Furan (CAS RN 110-00-9) of a purity by weight of 99 % or more 0 % - 31.12.2024
0.4514 ex 2932 19 00 41 2,2 Di(tetrahydrofuryl)propane (CAS RN 89686-69-1) 0 % - 31.12.2024
0.8252 ex 2932 19 00 55 (3S)-3-[4-[(5-Bromo-2-chlorophenyl)methyl]phenoxy]tetrahydro-furan (CAS RN 915095-89-5) with a purity by weight of 97 % or more 0 % - 31.12.2026
0.7614 ex 2932 19 00 65 Tefuryltrione (ISO) (CAS RN 473278-76-1) 0 % - 31.12.2023
0.3487 ex 2932 19 00 70 Furfurylamine (CAS RN 617-89-0) 0 % - 31.12.2024
0.3611 ex 2932 19 00 75 Tetrahydro-2-methylfuran (CAS RN 96-47-9) 0 % - 31.12.2023
0.5240 ex 2932 19 00 80 5-Nitrofurfurylidene di(acetate) (CAS RN 92-55-7) 0 % - 31.12.2026
0.2775 ex 2932 20 90 10 2'-Anilino-6'-[ethyl(isopentyl)amino]-3'-methylspiro[isobenzofuran-1(3H),9'-xanthen]-3-one (CAS RN 70516-41-5) 0 % - 31.12.2023
0.5257 ex 2932 20 90 15 Coumarin (CAS RN 91-64-5) 0 % - 31.12.2026
0.7958 ex 2932 20 90 18 4-Hydroxycoumarin (CAS-RN 1076-38-6) with a purity by weight of 98 % or more 0 % - 31.12.2025
0.7984 ex 2932 20 90 23 1,4-Dioxane-2,5-dione (CAS RN 502-97-6) with a purity by weight of 99,5 % or more 0 % - 31.12.2025
0.5611 ex 2932 20 90 40 (S)-(–)-α-Amino-γ-butyrolactone hydrobromide (CAS RN 15295-77-9) 0 % - 31.12.2022
0.6094 ex 2932 20 90 45 2,2-Dimethyl-1,3-dioxane-4,6-dione (CAS RN 2033-24-1) 0 % - 31.12.2023
0.7283 ex 2932 20 90 50 L-Lactide (CAS RN 4511-42-6) or D-Lactide (CAS RN 13076-17-0) or dilactide (CAS RN 95-96-5) 0 % - 31.12.2022
0.7838 ex 2932 20 90 53 (R)-4-propyldihydrofuran-2(3H)-one (CAS RN 63095-51-2) with a purity by weight of 98 % or more 0 % - 31.12.2024
0.2765 ex 2932 20 90 55 6-Dimethylamino-3,3-bis(4-dimethylaminophenyl)phthalide (CAS RN 1552-42-7) 0 % - 31.12.2023
0.4162 ex 2932 20 90 60 6'-(Diethylamino)-3'-methyl-2'-(phenylamino)-spiro[isobenzofuran-1(3H),9'-[9H]xanthen]-3-one (CAS RN 29512-49-0) 0 % - 31.12.2026
0.7812 ex 2932 20 90 63 Selamectin (INN) 5Z-isomer (CAS RN 220119-17-5) 0 % - 31.12.2024
0.6620 ex 2932 20 90 65 Sodium 4-(methoxycarbonyl)-5-oxo-2,5-dihydrofuran-3-olate (CAS RN 1134960-41-0) 0 % - 31.12.2025
0.4161 ex 2932 20 90 71 6'-(Dibutylamino)-3'-methyl-2'-(phenylamino)-spiro[isobenzofuran-1(3H),9'-[9H]xanthen]-3-one (CAS RN 89331-94-2) 0 % - 31.12.2026
0.7599 ex 2932 20 90 75 3-Acetyl-6-methyl-2H-pyran-2, 4(3H)-dione (CAS RN 520-45-6) 0 % - 31.12.2023
0.3990 ex 2932 20 90 80 Gibberellic acid with a minimum purity by weight of 88 % (CAS RN 77-06-5) 0 % - 31.12.2023
0.4403 ex 2932 20 90 84 Decahydro-3a,6,6,9a-tetramethylnaphth [2,1-b] furan-2 (1H)-one (CAS RN 564-20-5) 0 % - 31.12.2023
0.3610 ex 2932 99 00 10 Bendiocarb (ISO) (CAS RN 22781-23-3) 0 % - 31.12.2023
0.7202 ex 2932 99 00 13 (4-Chloro-3-(4-ethoxybenzyl)phenyl)((3aS,5R,6S,6aS)-6-hydroxy 2,2-dimethyltetrahydrofuro[2,3-d][1 ,3]dioxol-5-yl)methanone (CAS RN 1103738-30-2) 0 % - 31.12.2026
0.5269 ex 2932 99 00 15 1,3,4,6,7,8-Hexahydro-4,6,6,7,8,8-hexamethylindeno[5,6-c]pyran (CAS RN 1222-05-5) 0 % - 31.12.2026
0.7178 ex 2932 99 00 18 4-(4-Bromo-3-((tetrahydro-2H-pyran-2-yloxy)methyl)phenoxy)benzonitrile (CAS RN 943311-78-2) 0 % - 31.12.2026
0.7431 ex 2932 99 00 23 2-ethyl-3-hydroxy-4-pyrone (CAS RN 4940-11-8) 0 % - 31.12.2022
0.5759 ex 2932 99 00 25 1-(2,2-Difluorobenzo[d][1,3]dioxol-5-yl)cyclopropanecarboxylic acid (CAS RN 862574-88-7) 0 % - 31.12.2022
0.7639 ex 2932 99 00 27 (2-Butyl-3-benzofuranyl)(4-hydroxy-3,5-diiodophenyl)methanone (CAS RN 1951-26-4) with a purity by weight of 99 % or more 0 % - 31.12.2023
0.8257 ex 2932 99 00 28 1,4,7,10,13-Pentaoxacyclopentadecane (CAS RN 33100-27-5) with a purity by weight of 90 % or more, the remainder mainly consisting of lineair precursors 0 % - 31.12.2026
0.7535 ex 2932 99 00 33 3-hydroxy-2-methyl-4-pyrone (CAS RN 118-71-8) 0 % - 31.12.2023
0.8035 ex 2932 99 00 38 1-Benzofuran-6-carboxylic acid (CAS RN 77095-51-3) with a purity by weight of 98 % or more 0 % - 31.12.2025
0.6243 ex 2932 99 00 43 Ethofumesate (ISO) (CAS RN 26225-79-6) with a purity by weight of 97 % or more 0 % - 31.12.2024
0.5915 ex 2932 99 00 45 2-Butylbenzofuran (CAS RN 4265-27-4) 0 % - 31.12.2024
0.7766 ex 2932 99 00 47 12H-[1]Benzofuro[3,2-c][1]benzoxepin-6-one (CAS RN 28763-77-1) 0 % - 31.12.2024
0.4907 ex 2932 99 00 50 7-Methyl-3,4-dihydro-2H-1,5-benzodioxepin-3-one (CAS RN 28940-11-6) 0 % - 31.12.2023
0.6113 ex 2932 99 00 53 1,3-Dihydro-1,3-dimethoxyisobenzofurane (CAS RN 24388-70-3) 0 % - 31.12.2023
0.6771 ex 2932 99 00 65 4,4-Dimethyl-3,5,8-trioxabicyclo[5,1,0]octane (CAS RN 57280-22-5) 0 % - 31.12.2025
0.7978 ex 2932 99 00 68 3,9-Diethylidene-2,4,8,10-tetraoxaspiro[5.5]undecane (CAS RN 65967-52-4) with a purity by weight of 98 % or more 0 % - 31.12.2025
0.7930 ex 2932 99 00 73 5-Fluoro-3-methylbenzofuran-2-carboxylic acid (CAS RN 81718-76-5) with a purity by weight of 97 % or more 0 % - 31.12.2025
0.4063 ex 2932 99 00 75 3-(3,4-Methylenedioxyphenyl)-2-methylpropanal (CAS RN 1205-17-0) 0 % - 31.12.2022
0.7936 ex 2932 99 00 78 Methyl 2,2-difluoro-1,3-benzodioxole-5-carboxylate (CAS RN 773873-95-3) with a purity by weight of 98 % or more 0 % - 31.12.2025
0.4106 ex 2932 99 00 80 1,3:2,4-bis-O-(4-Methylbenzylidene)-D-glucitol (CAS RN 81541-12-0) 0 % - 31.12.2023
0.7954 ex 2932 99 00 83 6,11-Dihydrodibenz[b,e]oxepin-11-one (CAS RN 4504-87-4) with a purity by weight of 98 % or more 0 % - 31.12.2025
0.3697 ex 2932 99 00 85 1,3:2,4-bis-O-(3,4-dimethylbenzylidene)-D-glucitol (CAS RN 135861-56-2) 0 % - 31.12.2023
0.7903 ex 2933 19 90 13 3-(Difluoromethyl)-5-fluoro-1-methyl-1H-pyrazole-4-carbonyl fluoride (CAS RN 1255735-07-9) with a purity by weight of 95 % or more 0 % - 31.12.2024
0.6262 ex 2933 19 90 15 Pyrasulfotole (ISO) (CAS RN 365400-11-9) with a purity by weight of 96 % or more 0 % - 31.12.2024
0.7835 ex 2933 19 90 17 1,3-dimethyl-1H-pyrazole (CAS RN 694-48-4) with a purity by weight of 98 % or more 0 % - 31.12.2024
0.7918 ex 2933 19 90 23 Fluindapyr (ISO) (CAS RN 1383809-87-7) with a purity by weight of 96 % or more 0 % - 31.12.2024
0.6261 ex 2933 19 90 25 3-Difluoromethyl-1-methyl-1H-pyrazole-4-carboxylic acid (CAS RN 176969-34-9) 0 % - 31.12.2024
0.7836 ex 2933 19 90 27 3-(3,3,3-trifluoro-2,2-dimethylpropoxy)-1H-pyrazole-4-carboxylic acid (CAS RN 2229861-20-3) with a purity by weight of 95 % or more 0 % - 31.12.2024
0.3699 ex 2933 19 90 30 3-Methyl-1-p-tolyl-5-pyrazolone (CAS RN 86-92-0) 0 % - 31.12.2023
0.7811 ex 2933 19 90 33 Fipronil (ISO) (CAS RN 120068-37-3) with a purity by weight of 95 % or more for the use in the manufacture of veterinary medicine (1) 0 % - 31.12.2024
0.3877 ex 2933 19 90 40 Edaravone (INN) (CAS RN 89-25-8) 0 % - 31.12.2023
0.7938 ex 2933 19 90 43 tert-Butyl 2-(3,5-dimethyl-1H-pyrazol-4-yl)acetate (CAS RN 1082827-81-3) with a purity by weight of 95 % or more 0 % - 31.12.2025
0.7119 ex 2933 19 90 45 5-Amino-1-[2,6-dichloro-4-(trifluoromethyl)phenyl]-1H-pyrazole-3-carbonitrile (CAS RN 120068-79-3) 0 % - 31.12.2026
0.8046 ex 2933 19 90 48 1-(3-iodo-1-isopropyl-1H-pyrazol-4-yl)ethanone (CAS RN 1269440-49-4) with a purity by weight of 98 % or more 0 % - 31.12.2025
0.3992 ex 2933 19 90 50 Fenpyroximate (ISO) (CAS RN 134098-61-6) 0 % - 31.12.2024
0.8240 ex 2933 19 90 53 3-[2-(Dispiro[2.0.24.13]heptan-7-yl)ethoxy]-1H-pyrazole-4-carboxylic acid (CAS RN 2608048-67-3) with a purity by weight of 98 % or more 0 % - 31.12.2026
0.4494 ex 2933 19 90 60 Pyraflufen-ethyl (ISO) (CAS RN 129630-19-9) 0 % - 31.12.2024
0.7576 ex 2933 19 90 65 4-Bromo-1-(1-ethoxyethyl)-1H-pyrazole (CAS RN 1024120-52-2) 0 % - 31.12.2023
0.4404 ex 2933 19 90 70 4,5-Diamino-1-(2-hydroxyethyl)-pyrazolsulphate (CAS RN 155601-30-2) 0 % - 31.12.2023
0.8312 ex 2933 21 00 45 Sodium (5S,8S)-8-methoxy-2,4-dioxo-1,3-diazaspiro[4.5]decan-3-ide (CAS RN 1400584-86-2) with a purity by weight of 90 % or more 0 % - 31.12.2026
0.4084 ex 2933 21 00 50 1-Bromo-3-chloro-5,5-dimethylhydantoin (CAS RN 16079-88-2) / (CAS RN 32718-18-6) 0 % - 31.12.2026
0.6835 ex 2933 21 00 55 1-Aminohydantoin hydrochloride (CAS RN 2827-56-7) 0 % - 31.12.2025
0.4088 ex 2933 21 00 60 DL-p-Hydroxyphenylhydantoin (CAS RN 2420-17-9) 0 % - 31.12.2026
0.5115 ex 2933 21 00 80 5,5-Dimethylhydantoin (CAS RN 77-71-4) 0 % - 31.12.2025
0.5972 ex 2933 29 90 15 Ethyl 4-(1-hydroxy-1-methylethyl)-2-propylimidazole-5-carboxylate (CAS RN 144689-93-0) 0 % - 31.12.2023
0.7527 ex 2933 29 90 18 2-(2-chlorophenyl)-1-[2-(2-chlorophenyl)-4,5-diphenyl-2H-imidazol-2-yl]-4,5-diphenyl-1H-imidazole (CAS RN 7189-82-4) 0 % - 31.12.2023
0.8150 ex 2933 29 90 20 tert-butyl (2S)-2-(5-bromo-1H-imidazol-2-yl)pyrrolidine-1-carboxylate (CAS RN 1007882-59-8) with a purity by weight of 98 % or more 0 % - 31.12.2026
0.7937 ex 2933 29 90 23 1,1'-Thiocarbonylbis(imidazole) (CAS RN 6160-65-2) with a purity by weight of 95 % or more 0 % - 31.12.2025
0.5920 ex 2933 29 90 28 Prochloraz (ISO) (CAS RN 67747-09-5) with purity by weight of 97 % or more 0 % - 31.12.2023
0.5921 ex 2933 29 90 45 Prochloraz copper chloride (ISO) (CAS RN 156065-03-1) 0 % - 31.12.2023
0.2752 ex 2933 29 90 50 1,3-Dimethylimidazolidin-2-one (CAS RN 80-73-9) 0 % - 31.12.2023
0.6263 ex 2933 29 90 55 Fenamidone (ISO) (CAS RN 161326-34-7) with a purity by weight of 97 % or more 0 % - 31.12.2024
0.5215 ex 2933 29 90 60 1-Cyano-2-methyl-1-[2-(5-methylimidazol-4-ylmethylthio)ethyl]isothiourea (CAS RN 52378-40-2) 0 % - 31.12.2026
0.7120 ex 2933 29 90 75 2,2'-Azobis[2-(2-imidazolin-2-yl)propane] dihydrochloride (CAS RN 27776-21-2) 0 % - 31.12.2026
0.5821 ex 2933 29 90 80 Imazalil (ISO) (CAS RN 35554-44-0) 0 % - 31.12.2022
0.6415 2933 39 50 Fluroxypyr (ISO) methyl ester (CAS RN 69184-17-4) 0 % - 31.12.2024
0.7186 ex 2933 39 99 10 2-Aminopyridin-4-ol hydrochloride (CAS RN 1187932-09-7) 0 % - 31.12.2026
0.6462 ex 2933 39 99 11 2-(Chloromethyl)-4-(3-methoxypropoxy)-3-methylpyridine hydrochloride(CAS RN 153259-31-5) 0 % - 31.12.2024
0.5608 ex 2933 39 99 12 2,3-Dichloropyridine (CAS RN 2402-77-9) 0 % - 31.12.2022
0.6812 ex 2933 39 99 14 N,4-Dimethyl-1-(phenylmethyl)- 3-piperidinamine hydrochloride (1:2) (CAS RN 1228879-37-5) 0 % - 31.12.2022
0.8238 ex 2933 39 99 15 (S)-6-Bromo-2-(4-(3-(1,3-dioxoisoindolin-2-yl)propyl)-2,2-dimethylpyrrolidin-1-yl)nicotinamide (CAS RN 2606972-45-4) with a purity by weight of 98 % or more 0 % - 31.12.2026
0.8239 ex 2933 39 99 18 Perfluorophenyl 6-fluoropyridine-2-sulfonate (CAS RN 2608048-81-1) with a purity by weight of 98 % or more 0 % - 31.12.2026
0.4842 ex 2933 39 99 20 Copper pyrithione powder (CAS RN 14915-37-8) 0 % - 31.12.2022
0.6545 ex 2933 39 99 21 Boscalid (ISO) (CAS RN 188425-85-6) 0 % - 31.12.2024
0.4594 ex 2933 39 99 24 2-Chloromethyl-4-methoxy-3,5-dimethylpyridine hydrochloride (CAS RN 86604-75-3) 0 % - 31.12.2024
0.3604 ex 2933 39 99 25 Imazethapyr (ISO) (CAS RN 81335-77-5) 0 % - 31.12.2023
0.6813 ex 2933 39 99 26 2-[4-(Hydrazinylmethyl)phenyl]-pyridine dihydrochloride (CAS RN 1802485-62-6) 0 % - 31.12.2022
0.7091 ex 2933 39 99 27 Pyridine-2,6-dicarboxylic acid (CAS RN 499-83-2) 0 % - 31.12.2026
0.6368 ex 2933 39 99 28 Ethyl-3-[(3-amino-4-methylamino-benzoyl)-pyridin-2-yl-amino]-propionate (CAS RN 212322-56-0) 0 % - 31.12.2024
0.8068 ex 2933 39 99 30 4-amino-3-(4-phenoxyphenyl)-1-[(3R)-piperidin-3-yl]-1,3-dihydro-2H-imidazo[4,5-c]pyridin-2-one (CAS RN 1971921-35-3) mono oxalate with a purity by weight of the free base of 70 % or more 0 % - 31.12.2025
0.6458 ex 2933 39 99 31 2-(Chloromethyl)-3-methyl-4-(2,2,2-trifluoroethoxy)pyridine hydrochloride(CAS RN 127337-60-4) 0 % - 31.12.2024
0.5241 ex 2933 39 99 32 2-(Chloromethyl)-3,4-dimethoxypyridine hydrochloride (CAS RN 72830-09-2) 0 % - 31.12.2026
0.7181 ex 2933 39 99 33 5-(3-chlorophenyl)-3-methoxypyridine-2-carbonitrile (CAS RN 1415226-39-9) 0 % - 31.12.2026
0.3878 ex 2933 39 99 35 Aminopyralid (ISO) (CAS RN 150114-71-9) 0 % - 31.12.2023
0.7296 ex 2933 39 99 36 1-[2-[5-Methyl-3-(trifluoromethyl)-1H-pyrazol-1-yl]acetyl]piperidine-4-carbothioamide (CAS RN 1003319-95-6) 0 % - 31.12.2022
0.5230 ex 2933 39 99 37 Aqueous solution of pyridine-2-thiol-1-oxide, sodium salt (CAS RN 3811-73-2) 0 % - 31.12.2026
0.7348 ex 2933 39 99 38 (2-chloropyridin-3-yl) methanol (CAS RN 42330-59-6) 0 % - 31.12.2022
0.7349 ex 2933 39 99 39 2,6-dichloropyridine-3-carboxamide (CAS RN 62068-78-4) 0 % - 31.12.2022
0.8266 ex 2933 39 99 42 Glasdegib maleate (INN) (CAS RN 2030410-25-2) with a purity by weight of 98 % or more 0 % - 31.12.2026
0.7121 ex 2933 39 99 46 Fluopicolide (ISO) (CAS RN 239110-15-7) with a content by weight of 97 % or more 0 % - 31.12.2026
0.4706 ex 2933 39 99 47 (-)-trans-4-(4'-Fluorophenyl)-3-hydroxymethyl-N-methylpiperidine (CAS RN 105812-81-5) 0 % - 31.12.2026
0.4749 ex 2933 39 99 48 Flonicamid (ISO) (CAS RN 158062-67-0) 0 % - 31.12.2024
0.7352 ex 2933 39 99 51 2,5-Dichloro-4,6-dimethylnicotinonitrile (CAS RN 91591-63-8) 0 % - 31.12.2022
0.5610 ex 2933 39 99 52 6-Chloro-3-nitropyridin-2-ylamine (CAS RN 27048-04-0) 0 % - 31.12.2023
0.4646 ex 2933 39 99 55 Pyriproxyfen (ISO) (CAS RN 95737-68-1) of a purity by weight of 97 % or more 0 % - 31.12.2024
0.5760 ex 2933 39 99 57 Tert-butyl 3-(6-amino-3-methylpyridin-2-yl)benzoate (CAS RN 1083057-14-0) 0 % - 31.12.2022
0.7598 ex 2933 39 99 59 Chlorpyrifos-Methyl (ISO) (CAS RN 5598-13-0) 0 % - 31.12.2023
0.2750 ex 2933 39 99 60 2-Fluoro-6-(trifluoromethyl)pyridine (CAS RN 94239-04-0) 0 % - 31.12.2023
0.7584 ex 2933 39 99 61 6-Bromopyridin-2-amine (CAS RN 19798-81-3) 0 % - 31.12.2023
0.7577 ex 2933 39 99 62 Ethyl 2,6-Dichloronicotinate (CAS RN 58584-86-4) 0 % - 31.12.2023
0.7617 ex 2933 39 99 64 Methyl 1-(3-chloropyridin-2-yl)-3-hydroxymethyl-1H-pyrazole-5-carboxylate (CAS RN 960316-73-8) 0 % - 31.12.2023
0.3602 ex 2933 39 99 65 Acetamiprid (ISO) (CAS RN 135410-20-7) 0 % - 31.12.2023
0.5946 ex 2933 39 99 67 (1R,3S,4S)-tert-Butyl 3-(6-bromo-1H-benzo[d]imidazol-2-yl)-2-azabicyclo[2.2.1]heptane-2-carboxylate (CAS RN 1256387-74-2) 0 % - 31.12.2023
0.7616 ex 2933 39 99 68 1-(3-Chloropyridin-2-yl)-3-[[5-(trifluoromethyl)-2H-tetrazol-2-yl]methyl]-1H-pyrazole-5-carboxylic acid (CAS RN 1352319-02-8) with a purity by weight of 85 % or more 0 % - 31.12.2023
0.8223 ex 2933 39 99 69 Regorafenib (INN) (CAS RN 755037-03-7) with a purity by weight of 98 % or more 0 % - 31.12.2026
0.5494 ex 2933 39 99 70 2,3-Dichloro-5-trifluoromethylpyridine (CAS RN 69045-84-7) 0 % - 31.12.2026
0.7704 ex 2933 39 99 71 Diflufenican (ISO) (CAS RN 83164-33-4) 0 % - 31.12.2024
0.7737 ex 2933 39 99 73 6-Chloro-4-(4-fluoro-2-methylphenyl)pyridin-3-amine hydrochloride 0 % - 31.12.2024
0.7844 ex 2933 39 99 74 4-Aminopyridine-2-carboxamide (CAS RN 100137-47-1) with a purity by weight of 98 % or more 0 % - 31.12.2024
0.8072 ex 2933 39 99 75 Clodinafop-propargyl (ISO) (CAS RN 105512-06-9) with a purity by weight of 90 % or more 0 % - 31.12.2025
0.7813 ex 2933 39 99 76 Apalutamide (INN) (CAS RN 956104-40-8) 0 % - 31.12.2024
0.5922 ex 2933 39 99 77 Imazamox (ISO) (CAS RN 114311-32-9) 0 % - 31.12.2023
0.7818 ex 2933 39 99 78 Niraparib tosylate monohydrate (INNM) (CAS RN 1613220-15-7) 0 % - 31.12.2024
0.7754 ex 2933 39 99 79 Avibactam (INN) – sodium (CAS RN 1192491-61-4) 0 % - 31.12.2024
0.8074 ex 2933 39 99 80 Tert-Butyl (3R)-3-(4-amino-2-oxo-2,3-dihydro-1H-imidazo[4, 5-c]pyridin-1-yl)piperidine-1-carboxylate (CAS RN 1971921-33-1) with a purity by weight of 95 % or more 0 % - 31.12.2025
0.7906 ex 2933 39 99 81 4-Hydroxy-3-pyridinesulphonic acid (CAS RN 51498-37-4) with a purity by weight of 98 % or more 0 % - 31.12.2024
0.7866 ex 2933 39 99 82 Picloram (ISO) (CAS RN 1918-02-1) containing by weight not more than 15 % of water and with a dry weight purity of 92 % or more 0 % - 31.12.2024
0.7976 ex 2933 39 99 83 2-Hydroxy-4-azoniaspiro[3,5]nonane chloride (CAS RN 15285-58-2) with a purity by weight of 97 % or more 0 % - 31.12.2025
0.7925 ex 2933 39 99 84 Diethyl(3-pyridyl)borane (CAS RN 89878-14-8) with a purity by weight of 98 % or more 0 % - 31.12.2025
0.5129 ex 2933 39 99 85 2-Chloro-5-chloromethylpyridine (CAS RN 70258-18-3) 0 % - 31.12.2025
0.7981 ex 2933 39 99 86 3-(N-hydroxycarbamimidoyl)pyridine 1-oxide (CAS RN 92757-16-9) with a purity by weight of 97 % or more 0 % - 31.12.2025
0.7939 ex 2933 39 99 87 6-Chloro-N-(2,2-dimethylpropyl)pyridine-3-carboxamide (CAS RN 585544-20-3) with a purity by weight of 97 % or more 0 % - 31.12.2025
0.8096 ex 2933 39 99 89 1-Benzyl-4-phenylpiperidine-4-carbonitrile monohydrochloride (CAS RN 71258-18-9) with a purity by weight of 98 % or more 0 % - 31.12.2025
0.3603 ex 2933 49 10 10 Quinmerac (ISO) (CAS RN 90717-03-6) 0 % - 31.12.2023
0.4525 ex 2933 49 10 20 3-Hydroxy-2-methylquinoline-4-carboxylic acid (CAS RN 117-57-7) 0 % - 31.12.2023
0.5761 ex 2933 49 10 30 Ethyl 4-oxo-1,4-dihydroquinoline-3-carboxylate (CAS RN 52980-28-6) 0 % - 31.12.2022
0.6339 ex 2933 49 10 40 4,7-Dichloroquinoline (CAS RN 86-98-6) 0 % - 31.12.2024
0.6773 ex 2933 49 10 50 1-Cyclopropyl-6,7,8-trifluoro-1,4-dihydro-4-oxo-3-quinolinecarboxylic acid (CAS RN 94695-52-0) 0 % - 31.12.2025
0.7098 ex 2933 49 90 25 Cloquintocet-mexyl (ISO) (CAS RN 99607-70-2) 0 % - 31.12.2026
0.4927 ex 2933 49 90 30 Quinoline (CAS RN 91-22-5) 0 % - 31.12.2025
0.7524 ex 2933 49 90 45 6,7-Dimethoxy-3,4- dihydroisoquinoline hydrochloride (CAS RN 20232-39-7) 0 % - 31.12.2023
0.8037 ex 2933 49 90 55 2-(tert-butoxycarbonyl)-5,7-dichloro-1,2,3,4-tetrahydroisoquinoline-6-carboxylic acid (CAS RN 851784-82-2) with a purity by weight of 98 % or more 0 % - 31.12.2025
0.3880 ex 2933 49 90 70 Quinolin-8-ol (CAS RN 148-24-3) 0 % - 31.12.2023
0.4043 ex 2933 52 00 10 Malonylurea (barbituric acid) (CAS RN 67-52-7) 0 % - 31.12.2026
0.7631 ex 2933 54 00 10 5,5'-(1,2-diazenediyl)bis [2,4,6 (1H, 3H, 5H)-pyrimidinetrione] (CAS RN 25157-64-6) 0 % - 31.12.2023
0.6468 ex 2933 59 95 10 6-Amino-1,3-dimethyluracil (CAS RN 6642-31-5) 0 % - 31.12.2024
0.6151 ex 2933 59 95 13 2-Diethylamino-6-hydroxy-4-methylpyrimidine (CAS RN 42487-72-9) 0 % - 31.12.2023
0.2578 ex 2933 59 95 15 Sitagliptin phosphate monohydrate (CAS RN 654671-77-9) 0 % - 31.12.2023
0.2745 ex 2933 59 95 20 2,4-Diamino-6-chloropyrimidine (CAS RN 156-83-2) 0 % - 31.12.2023
0.6763 ex 2933 59 95 21 N-(2-oxo-1,2-dihydropyrimidin-4-yl)benzamide (CAS RN 26661-13-2) 0 % - 31.12.2025
0.7370 ex 2933 59 95 22 6-chloro-1,3-dimethyluracil (CAS RN 6972-27-6) 0 % - 31.12.2022
0.7345 ex 2933 59 95 24 1-(Cyclopropylcarbonyl)piperazine hydrochloride (CAS RN 1021298-67-8) 0 % - 31.12.2022
0.7392 ex 2933 59 95 26 5-Fluoro-4-hydrazino-2-methoxypyrimidine (CAS RN 166524-64-7) 0 % - 31.12.2022
0.5912 ex 2933 59 95 27 2-[(2-Amino-6-oxo-1,6-dihydro-9H-purin-9-yl)methoxy]-3-hydroxypropylacetate (CAS RN 88110-89-8) 0 % - 31.12.2023
0.7810 ex 2933 59 95 28 6,8-Difluoro-1-(methylamino)-7-(4-methylpiperazin-1-yl)-4-oxo-1,4-dihydroquinoline-3-carboxylic acid (CAS RN 100276-37-7) 0 % - 31.12.2024
0.8157 ex 2933 59 95 29 2-Amino-4-(4-methylpiperazin-1-yl) benzoic acid tert-butyl ester (CAS RN 1034975-35-3) with a purity by weight of 95 % or more 0 % - 31.12.2026
0.3600 ex 2933 59 95 30 Mepanipyrim (ISO) (CAS RN 110235-47-7) 0 % - 31.12.2023
0.6240 ex 2933 59 95 33 4,6-Dichloro-5-fluoropyrimidine (CAS RN 213265-83-9) 0 % - 31.12.2024
0.6419 ex 2933 59 95 37 6-Iodo-3-propyl-2-thioxo-2,3-dihydroquinazolin-4(1H)-one (CAS RN 200938-58-5) 0 % - 31.12.2024
0.8248 ex 2933 59 95 38 5-(5-Chlorosulfonyl-2-ethoxyphenyl)-1-methyl-3-propyl-1,6-dihydro-7H-pyrazolo[4,3-d]pyrimidin-7-one (CAS No 139756-22-2) with a purity by weight of 98 % or more 0 % - 31.12.2026
0.8243 ex 2933 59 95 41 2-(4-Phenoxyphenyl)-7-(piperidin-4-yl)-4,5,6,7-tetrahydropyrazolo[1,5-a]pyrimidine-3-carbonitrile (CAS RN 2190506-57-9) with a purity by weight of 98 % or more 0 % - 31.12.2026
0.8056 ex 2933 59 95 42 2-Chloropyrimidine (CAS RN 1722-12-9) with a purity by weight of 98 % or more 0 % - 31.12.2025
0.4704 ex 2933 59 95 45 1-[3-(Hydroxymethyl)pyridin-2-yl]-4-methyl-2-phenylpiperazine (CAS RN 61337-89-1) 0 % - 31.12.2024
0.6677 ex 2933 59 95 47 6-Methyl-2-oxoperhydropyrimidin-4-ylurea (CAS RN 1129-42-6) with a purity of 94 % or more 0 % - 31.12.2025
0.4699 ex 2933 59 95 50 2-(2-Piperazin-1-ylethoxy)ethanol (CAS RN 13349-82-1) 0 % - 31.12.2024
0.6987 ex 2933 59 95 52 6-Benzyladenine (CAS RN 1214-39-7) with a purity by weight of 97 % or more 0 % - 31.12.2026
0.2744 ex 2933 59 95 60 2,6-Dichloro-4,8-dipiperidinopyrimido[5,4-d]pyrimidine (CAS RN 7139-02-8) 0 % - 31.12.2023
0.7578 ex 2933 59 95 63 1-(3-Chlorophenyl) piperazine (CAS RN 6640-24-0) 0 % - 31.12.2023
0.4772 ex 2933 59 95 65 1-Chloromethyl-4-fluoro-1,4-diazoniabicyclo[2.2.2]octane bis(tetrafluoroborate) (CAS RN 140681-55-6) 0 % - 31.12.2024
0.7825 ex 2933 59 95 68 Guanine (CAS RN 73-40-5) with a purity by weight of 99 % or more 0 % - 31.12.2024
0.2735 ex 2933 59 95 70 N-(4-Ethyl-2,3-dioxopiperazin-1-ylcarbonyl)-D-2-phenylglycine (CAS RN 63422-71-9) 0 % - 31.12.2023
0.5542 ex 2933 59 95 77 3-(Trifluoromethyl)-5,6,7,8-tetrahydro[1,2,4]triazolo[4,3-a]pyrazine hydrochloride (1:1) (CAS RN 762240-92-6) 0 % - 31.12.2022
0.7071 ex 2933 59 95 87 5-Bromo-2,4-dichloropyrimidine (CAS RN 36082-50-5) 0 % - 31.12.2026
0.6774 ex 2933 69 80 13 Metribuzin (ISO) (CAS RN 21087-64-9) with a purity by weight of 93 % or more 0 % - 31.12.2025
0.6621 ex 2933 69 80 15 2-Chloro-4,6-dimethoxy-1,3,5-triazine (CAS RN 3140-73-6) 0 % - 31.12.2025
0.6951 ex 2933 69 80 17 Benzoguanamine (CAS RN 91-76-9) 0 % - 31.12.2026
0.7721 ex 2933 69 80 23 1,3,5-tris(2,3-dibromopropyl)-1,3,5-triazinane-2,4,6-trione (CAS RN 52434-90-9) 0 % - 31.12.2024
0.7600 ex 2933 69 80 27 Troclosene sodium dihydrate (INNM) (CAS RN 51580-86-0) 0 % - 31.12.2023
0.7952 ex 2933 69 80 33 2,4,6-Trichloro-1,3,5-triazine (CAS RN 108-77-0) with a purity by weight of 99 % or more 0 % - 31.12.2025
0.5272 ex 2933 69 80 40 Troclosene sodium (INNM) (CAS RN 2893-78-9) 0 % - 31.12.2026
0.7464 ex 2933 69 80 45 2-(4,6-Bis-(2,4-dimethylphenyl)-1,3,5-triazin-2-yl)-5-(octyloxy)-phenol (CAS RN 2725-22-6) 0 % - 31.12.2023
0.5131 ex 2933 69 80 55 Terbutryn (ISO) (CAS RN 886-50-0) 0 % - 31.12.2025
0.4957 ex 2933 69 80 60 Cyanuric acid (CAS RN 108-80-5) 0 % - 31.12.2025
0.6127 ex 2933 69 80 65 1,3,5-Triazine-2,4,6(1H,3H,5H)-trithione, trisodium salt (CAS RN 17766-26-6) 0 % - 31.12.2023
0.6477 ex 2933 69 80 75 Metamitron (ISO) (CAS RN 41394-05-2) 0 % - 31.12.2024
0.3882 ex 2933 69 80 80 Tris(2-hydroxyethyl)-1,3,5-triazinetrione (CAS RN 839-90-7) 0 % - 31.12.2023
0.6960 ex 2933 79 00 15 Ethyl N-(tert-Butoxycarbonyl)-L-pyroglutamate (CAS RN 144978-12-1) 0 % - 31.12.2026
0.7346 ex 2933 79 00 25 Methyl 2-oxo-2,3-dihydro-1H-indole-6-carboxylate (CAS RN 14192-26-8) 0 % - 31.12.2022
0.4294 ex 2933 79 00 30 5-Vinyl-2-pyrrolidone (CAS RN 7529-16-0) 0 % - 31.12.2022
0.7453 ex 2933 79 00 35 1-tert-butyl 2-methyl(2S)-5-oxopyrrolidine-1,2-dicarboxylate (CAS RN 108963-96-8) 0 % - 31.12.2023
0.8038 ex 2933 79 00 45 1-phenyl-3H-indol-2-one (CAS RN 3335-98-6) with a purity by weight of 99 % or more 0 % - 31.12.2025
0.4524 ex 2933 79 00 50 6-Bromo-3-methyl-3H-dibenz(f,ij)isoquinoline-2,7-dione (CAS RN 81-85-6) 0 % - 31.12.2023
0.8203 ex 2933 79 00 55 (3S,4R)-3-amino-4-hydroxypyrrolidin-2-one hydrochloride (CAS RN 2446872-13-3) with a purity by weight of 98 % or more 0 % - 31.12.2026
0.8212 ex 2933 79 00 65 1-Dodecyl-2-pyrrolidone (CAS RN 2687-96-9) with a purity by weight of 98 % or more 0 % - 31.12.2026
0.4985 ex 2933 79 00 70 (S)-N-[(Diethylamino)methyl]-alpha-ethyl-2-oxo-1-pyrrolidineacetamide L-(+)-tartrate, (CAS RN 754186-36-2) 0 % - 31.12.2025
0.3580 ex 2933 99 80 06 Metconazole (ISO) (CAS RN 125116-23-6) with a purity by weight of 98 % or more 0 % - 31.12.2023
0.8156 ex 2933 99 80 07 4-(2-Oxo-2,3-dihydro-1H-benzimidazol-1-yl)butanoic acid (CAS RN 3273-68-5) with a purity by weight of 98 % or more 0 % - 31.12.2026
0.8180 ex 2933 99 80 08 Prothioconazole (ISO) (CAS RN 178928-70-6) with a purity by weight of 98 % or more 0 % - 31.12.2026
0.8202 ex 2933 99 80 09 5,7-Difluoro-2-(4-fluorophenyl)-1H-indole (CAS RN 901188-04-3) with a purity by weight of 98 % or more 0 % - 31.12.2026
0.6563 ex 2933 99 80 11 Fenbuconazole (ISO) (CAS RN 114369-43-6) 0 % - 31.12.2024
0.6564 ex 2933 99 80 12 Myclobutanil (ISO) (CAS RN 88671-89-0) 0 % - 31.12.2024
0.5243 ex 2933 99 80 13 5-Difluoromethoxy-2-mercapto-1-H-benzimidazole (CAS RN 97963-62-7) 0 % - 31.12.2026
0.6146 ex 2933 99 80 14 2-(2H-benzotriazol-2-yl)-4-methyl-6-(2-methylprop-2-en-1-yl)phenol(CAS RN 98809-58-6) 0 % - 31.12.2023
0.2731 ex 2933 99 80 15 2-(2H-Benzotriazol-2-yl)-4,6-di-tert-pentylphenol (CAS RN 25973-55-1) 0 % - 31.12.2023
0.6872 ex 2933 99 80 16 Pyridate (ISO)(CAS RN 55512-33-9) with a purity by weight of 90 % or more 0 % - 31.12.2025
0.8290 ex 2933 99 80 18 2-(2-Ethoxyphenyl)-5-methyl-7-propylimidazolo[5,1-f][1,2,4]-triazin-4(3H)-one (CAS RN 224789-21-3) with a purity by weight of 95 % or more 0 % - 31.12.2026
0.6567 ex 2933 99 80 19 2-(2,4-Dichlorophenyl)-3-(1H-1,2,4-triazol-1-yl)propan-1-ol (CAS RN 112281-82-0) 0 % - 31.12.2024
0.2732 ex 2933 99 80 20 2-(2H-Benzotriazol-2-yl)-4,6-bis(1-methyl-1-phenylethyl)phenol (CAS RN 70321-86-7) 0 % - 31.12.2023
0.6829 ex 2933 99 80 21 1-(Bis(dimethylamino)methylene)-1H-[1,2,3]triazolo[4,5-b]pyridinium 3-oxide hexafluorophosphate(V) (CAS RN 148893-10-1) 0 % - 31.12.2025
0.8249 ex 2933 99 80 22 Dibenz[b,f]azepine-5-carbonyl chloride (CAS RN 33948-22-0) with a purity by weight of 98 % or more 0 % - 31.12.2026
0.6244 ex 2933 99 80 23 Tebuconazole (ISO) (CAS RN 107534-96-3) with a purity by weight of 95 % or more 0 % - 31.12.2024
0.5625 ex 2933 99 80 24 1,3-Dihydro-5,6-diamino-2H-benzimidazol-2-one (CAS RN 55621-49-3) 0 % - 31.12.2022
0.8089 ex 2933 99 80 25 6-(4-Benzylamino-3-nitrophenyl)-5-methyl-4,5-dihydro-2H-pyridazin-3-one (CAS RN 77469-62-6) with a purity by weight of 95 % or more 0 % - 31.12.2025
0.6409 ex 2933 99 80 27 5,6-Dimethylbenzimidazole (CAS RN 582-60-5) 0 % - 31.12.2024
0.3593 ex 2933 99 80 30 Quizalofop-P-ethyl (ISO) (CAS RN 100646-51-3) 0 % - 31.12.2023
0.8284 ex 2933 99 80 32 1H-1,2,3-Triazole (CAS RN 288-36-8) or 2H-1,2,3-triazole (CAS RN 288-35-7) with a purity by weight of 99 % or more 0 % - 31.12.2026
0.6249 ex 2933 99 80 33 Penconazole (ISO) (CAS RN 66246-88-6) 0 % - 31.12.2024
0.7043 ex 2933 99 80 34 2,4-Dihydro-5-methoxy-4-methyl-3H-1,2,4-triazol-3-on (CAS RN 135302-13-5) 0 % - 31.12.2026
0.6958 ex 2933 99 80 36 3-Chloro-2-(1,1-difluoro-3-buten-1-yl)-6-methoxyquinoxaline (CAS RN 1799733-46-2) 0 % - 31.12.2023
0.4695 ex 2933 99 80 37 8-Chloro-5,10-dihydro-11H-dibenzo [b,e] [1,4]diazepin-11-one (CAS RN 50892-62-1) 0 % - 31.12.2024
0.7045 ex 2933 99 80 38 (4aS,7aS)-Octahydro-1H-pyrrolo[3,4-b]pyridine (CAS RN 151213-40-0) 0 % - 31.12.2026
0.3591 ex 2933 99 80 40 trans-4-Hydroxy-L-proline (CAS RN 51-35-4) 0 % - 31.12.2023
0.7273 ex 2933 99 80 41 5-[4'-(bromomethyl)biphenyl-2-yl]-1-trityl-1H-tetrazole (CAS RN 124750-51-2) 0 % - 31.12.2022
0.7185 ex 2933 99 80 42 (S)-2,2,4-Trimethylpyrrolidine hydrochloride (CAS RN 1897428-40-8) 0 % - 31.12.2026
0.3582 ex 2933 99 80 45 Maleic hydrazide (ISO) (CAS RN 123-33-1) 0 % - 31.12.2023
0.7269 ex 2933 99 80 46 (S)-indoline-2-carboxylic acid (CAS RN 79815-20-6) 0 % - 31.12.2022
0.5818 ex 2933 99 80 47 Paclobutrazol (ISO) (CAS RN 76738-62-0) 0 % - 31.12.2022
0.7410 ex 2933 99 80 48 5-Amino-6-methyl-2-benzimidazolone (CAS RN 67014-36-2) 0 % - 31.12.2022
0.5945 ex 2933 99 80 53 Potassium (S)-5-(tert-butoxycarbonyl)-5-azaspiro[2.4]heptane-6-carboxylate (CAS RN 1441673-92-2) (5) 0 % - 31.12.2023
0.6599 ex 2933 99 80 54 3-(Salicyloylamino)-1,2,4-triazole (CAS RN 36411-52-6) 0 % - 31.12.2025
0.4585 ex 2933 99 80 55 Pyridaben (ISO) (CAS RN 96489-71-3) 0 % - 31.12.2024
0.7457 ex 2933 99 80 56 Methyl 3,5-diamino-6-chloropyrazine-2-carboxylate (CAS RN 1458-01-1) 0 % - 31.12.2023
0.5901 ex 2933 99 80 57 2-(5-Methoxyindol-3-yl)ethylamine (CAS RN 608-07-1) 0 % - 31.12.2023
0.7649 ex 2933 99 80 58 Ipconazole (ISO) (CAS RN 125225-28-7) with a purity by weight of 90 % or more 0 % - 31.12.2023
0.7673 ex 2933 99 80 59 Hydrates of Hydroxybenzotriazole (CAS RN 80029-43-2 and CAS RN 123333-53-9) 0 % - 31.12.2023
0.7927 ex 2933 99 80 60 2-[(6,11-Dihydro-5H-dibenz[b,e]azepin-6-yl)-methyl]-1H-isoindole-1,3(2H)-dione (CAS RN 143878-20-0) with a purity by weight of 99 % or more 0 % - 31.12.2025
0.7624 ex 2933 99 80 61 (1R,5S)-8-Benzyl-8-azabicyclo(3.2.1)octan-3-one hydrochloride (CAS RN 83393-23-1) 0 % - 31.12.2023
0.7680 ex 2933 99 80 63 L-Prolinamide (CAS RN 7531-52-4) 0 % - 31.12.2023
0.8032 ex 2933 99 80 65 1,2,4-Triazole (CAS RN 288-88-0) with a purity by weight of 99 % or more 0 % - 31.12.2025
0.7839 ex 2933 99 80 66 (6-(4-fluorobenzyl)-3,3-dimethyl-2,3-dihydro-1H-pyrrolo[3,2-b]pyrid-5-yl)methanol (CAS RN 1799327-42-6) with a purity by weight of 98 % or more 0 % - 31.12.2024
0.5468 ex 2933 99 80 67 Candesartan ethyl ester (INNM) (CAS RN 139481-58-6) 0 % - 31.12.2026
0.7679 ex 2933 99 80 68 5-((1S,2S)-2-((2R,6S,9S,11R,12R,14aS,15S,16S,20R,23S,25aR)-9-amino-20-((R)-3-amino-1-hydroxy-3-oxopropyl)-2,11,12,15-tetrahydroxy-6-((R)-1-hydroxyethyl)-16-methyl-5,8,14,19,22,25-hexaoxotetracosahydro-1H-dipyrrolo[2,1-c:2',1'-l][1,4,7,10,13,16]hexaazacyclohenicosin-23-yl)-1,2-dihydroxyethyl)-2-hydroxyphenyl hydrogen sulphate (CAS RN 168110-44-9) 0 % - 31.12.2023
0.8053 ex 2933 99 80 69 5-Formyl-2,4-dimethyl-1H-pyrrole-3-carboxylic acid (CAS RN 253870-02-9) with a purity by weight of 96 % or more 0 % - 31.12.2025
0.7971 ex 2933 99 80 70 5-(Bis-(2-hydroxyethyl)-amino)-1-methyl-1H-benzimidazole-2-butanoic acid ethyl ester (CAS RN 3543-74-6) with a purity by weight of 98 % or more 0 % - 31.12.2025
0.4384 ex 2933 99 80 71 10-Methoxyiminostilbene (CAS RN 4698-11-7) 0 % - 31.12.2023
0.4503 ex 2933 99 80 72 1,4,7-Trimethyl-1,4,7-triazacyclononane (CAS RN 96556-05-7) 0 % - 31.12.2023
0.7759 ex 2933 99 80 75 1-[Bis(dimethylamino)methylene]-1H-benzotriazolium hexafluorophosphate(1-) 3-oxide (CAS RN 94790-37-1) 0 % - 31.12.2024
0.8054 ex 2933 99 80 76 2-Methylindoline (CAS RN 6872-06-6) with a purity by weight of 98 % or more 0 % - 31.12.2025
0.8064 ex 2933 99 80 77 9-[1,1′-Biphenyl]-3-yl-9′-[1,1′-biphenyl]-4-yl-3,3′-bi-9H-carbazole (CAS RN 1643479-47-3) with a purity by weight of 95 % or more 0 % - 31.12.2025
0.4382 ex 2933 99 80 78 3-Amino-3-azabicyclo (3.3.0) octane hydrochloride (CAS RN 58108-05-7) 0 % - 31.12.2023
0.8014 ex 2933 99 80 80 Pyrrole-2-carboxaldehyde (CAS RN 1003-29-8) with a purity by weight of 97 % or more 0 % - 31.12.2025
0.4164 ex 2933 99 80 81 1,2,3-Benzotriazole (CAS RN 95-14-7) 0 % - 31.12.2026
0.4165 ex 2933 99 80 82 Tolytriazole (CAS RN 29385-43-1) 0 % - 31.12.2023
0.6933 ex 2933 99 80 87 Carfentrazone-ethyl (ISOM) (CAS RN 128639-02-1) with a purity by weight of 90 % or more 0 % - 31.12.2025
0.3579 ex 2934 10 00 10 Hexythiazox (ISO) (CAS RN 78587-05-0) 0 % - 31.12.2023
0.5531 ex 2934 10 00 15 4-Nitrophenyl thiazol-5-ylmethyl carbonate (CAS RN 144163-97-3) 0 % - 31.12.2022
0.2725 ex 2934 10 00 20 2-(4-Methylthiazol-5-yl)ethanol (CAS RN 137-00-8) 0 % - 31.12.2023
0.5530 ex 2934 10 00 25 (S)-Ethyl-2-(3-((2-isopropylthiazol-4-yl)methyl)-3-methylureido)-4-morpholinobutanoate oxalate (CAS RN 1247119-36-3) 0 % - 31.12.2022
0.5538 ex 2934 10 00 35 (2-Isopropylthiazol-4-yl)-N-methylmethanamine dihydrochloride (CAS RN 1185167-55-8) 0 % - 31.12.2022
0.6264 ex 2934 10 00 45 2-Cyanimino-1,3-thiazolidine (CAS RN 26364-65-8) 0 % - 31.12.2024
0.4750 ex 2934 10 00 60 Fosthiazate (ISO) (CAS RN 98886-44-3) 0 % - 31.12.2024
0.7312 ex 2934 20 80 15 Benthiavalicarb-isopropyl (ISO) (CAS RN 177406-68-7) 0 % - 31.12.2022
0.4346 ex 2934 20 80 25 1,2-Benzisothiazol-3(2H)-one (CAS RN 2634-33-5) in the form of a powder with a purity by weight of 95 % or more, or in an aqueous mixture containing by weight 20 % or more of 1,2-benzisothiazol-3(2H)-one 0 % - 31.12.2022
0.4955 ex 2934 20 80 60 Benzothiazol-2-yl-(Z)-2-trityloxyimino-2-(2-aminothiazole-4-yl)-thioacetate (CAS RN 143183-03-3) 0 % - 31.12.2022
0.4910 ex 2934 20 80 70 N,N-Bis(1,3-benzothiazol-2-ylsulphanyl)-2-methylpropan-2-amine (CAS RN 3741-80-8) 0 % - 31.12.2025
0.5537 ex 2934 30 90 10 2-Methylthiophenothiazine (CAS RN 7643-08-5) 0 % - 31.12.2022
0.6492 ex 2934 99 90 10 Fluralaner (INN) (CAS RN 864731-61-3) 0 % - 31.12.2024
0.5924 ex 2934 99 90 12 Dimethomorph (ISO) (CAS RN 110488-70-5) 0 % - 31.12.2023
0.3577 ex 2934 99 90 15 Carboxin (ISO) (CAS RN 5234-68-4) 0 % - 31.12.2023
0.6476 ex 2934 99 90 16 Difenoconazole (ISO) (CAS RN 119446-68-3) 0 % - 31.12.2024
0.7843 ex 2934 99 90 17 (S)-4-(tert-butoxycarbonyl)-1,4-oxazepane-2-carboxylic acid (CAS RN 1273567-44-4) with a purity by weight of 95 % or more 0 % - 31.12.2024
0.8250 ex 2934 99 90 18 Methyl (1R,3R)-1-(1,3-benzodioxol-5-yl)-2-(2-chloroacetyl)-1,3,4,9-tetrahydropyrido[5,4-b]indole-3-carboxylate (CAS RN 171489-59-1) with a purity by weight of 99 % or more 0 % - 31.12.2026
0.4715 ex 2934 99 90 20 Thiophene (CAS RN 110-02-1) 0 % - 31.12.2024
0.8253 ex 2934 99 90 22 4-(Oxiran-2-ylmethoxy)-9H-carbazole (CAS RN 51997-51-4) with a purity by weight of 97 % or more 0 % - 31.12.2026
0.5263 ex 2934 99 90 23 Bromuconazole (ISO) with a purity by weight of 96 % or more (CAS RN 116255-48-2) 0 % - 31.12.2026
0.6241 ex 2934 99 90 24 Flufenacet (ISO) (CAS RN 142459-58-3) with a purity by weight of 95 % or more 0 % - 31.12.2024
0.4942 ex 2934 99 90 25 2,4-Diethyl-9H-thioxanthen-9-one (CAS RN 82799-44-8) 0 % - 31.12.2025
0.6252 ex 2934 99 90 26 4-Methylmorpholine 4-oxide in an aqueous solution (CAS RN 7529-22-8) 0 % - 31.12.2024
0.6362 ex 2934 99 90 27 2-(4-Hydroxyphenyl)-1-benzothiophene-6-ol (CAS RN 63676-22-2) 0 % - 31.12.2024
0.5242 ex 2934 99 90 28 11-(Piperazin-1-yl)dibenzo[b,f][1,4]thiazepine dihydrochloride (CAS RN 111974-74-4) 0 % - 31.12.2026
0.7837 ex 2934 99 90 29 (2R,5S)-tert-butyl 4-benzyl-2-methyl-5-(((R)-3-methylmorpholino)methyl)piperazine-1-carboxylate (CAS RN 1403902-77-1) with a purity by weight of 98 % or more 0 % - 31.12.2024
0.4700 ex 2934 99 90 30 Dibenzo[b,f][1,4]thiazepin-11(10H)-one (CAS RN 3159-07-7) 0 % - 31.12.2024
0.7840 ex 2934 99 90 33 (2R,3R,5R)-5-(4-amino-2-oxopyrimidin-1(2H)-yl)-2-((benzoyloxy)methyl)-4,4-difluorotetrahydrofuran-3-yl benzoate (CAS RN 134790-39-9) with a purity by weight of 98 % or more 0 % - 31.12.2024
0.8267 ex 2934 99 90 35 Nusinersen sodium (INNM) (CAS RN 1258984-36-9) with a purity by weight of 95 % or more 0 % - 31.12.2026
0.5813 ex 2934 99 90 37 4-Propan-2-ylmorpholine (CAS RN 1004-14-4) 0 % - 31.12.2022
0.6824 ex 2934 99 90 39 4-(Oxiran-2-ylmethoxy)-9H-carbazole (CAS RN 51997-51-4) 0 % - 31.12.2025
0.8094 ex 2934 99 90 40 2,3-Pyrazinedicarboxylic anhydride (CAS RN 4744-50-7) with a purity by weight of 95 % or more 0 % - 31.12.2025
0.6823 ex 2934 99 90 41 11-[4-(2-Chloro-ethyl)-1-piperazinyl]dibenzo(b,f)(1,4)thiazepine (CAS RN 352232-17-8) 0 % - 31.12.2025
0.6922 ex 2934 99 90 42 1-(Morpholin-4-yl)prop-2-en-1-one (CAS RN 5117-12-4) 0 % - 31.12.2024
0.8176 ex 2934 99 90 43 Fludioxonil (ISO) (CAS RN 131341-86-1) with a purity by weight of 99 % or more 0 % - 31.12.2026
0.6893 ex 2934 99 90 44 Propiconazole (ISO) (CAS RN 60207-90-1) with a purity by weight of 92 % or more 0 % - 31.12.2025
0.5453 ex 2934 99 90 48 Propan-2-ol -- 2-methyl-4-(4-methylpiperazin-1-yl)-10H-thieno[2,3-b][1,5]benzodiazepine (1:2) dihydrate (CAS RN 864743-41-9) 0 % - 31.12.2026
0.7188 ex 2934 99 90 49 Cytidine 5'-(disodium phosphate) (CAS RN 6757-06-8) 0 % - 31.12.2026
0.7259 ex 2934 99 90 52 Epoxiconazole (ISO) (CAS RN 133855-98-8) 0 % - 31.12.2022
0.7311 ex 2934 99 90 54 2-benzyl-2-dimethylamino-4'-morpholinobutyrophenone (CAS RN 119313-12-1) 0 % - 31.12.2022
0.8031 ex 2934 99 90 55 Uridine (CAS RN 58-96-8) with a purity by weight of 98 % or more 0 % - 31.12.2025
0.7297 ex 2934 99 90 56 1-[5-(2,6-Difluorophenyl)-4,5-dihydro-1,2-oxazol-3-yl]ethanone (CAS RN 1173693-36-1) 0 % - 31.12.2022
0.7229 ex 2934 99 90 57 (6R,7R)-7-Amino-8-oxo-3-(1-propenyl)-5-thia-1 -azabicyclo[4.2.0]oct-2-ene-2-carboxylic acid (CAS RN 120709-09-3) 0 % - 31.12.2022
0.3575 ex 2934 99 90 58 Dimethenamide-P (ISO) (CAS RN 163515-14-8) 0 % - 31.12.2023
0.7387 ex 2934 99 90 59 Dolutegravir (INN) (CAS RN 1051375-16-6) or dolutegravir sodium (CAS RN 1051375-19-9) 0 % - 31.12.2022
0.2718 ex 2934 99 90 60 DL-Homocysteine thiolactone hydrochloride (CAS RN 6038-19-3) 0 % - 31.12.2023
0.7459 ex 2934 99 90 61 5-(1,2-dithiolan-3-yl)valeric acid (CAS RN 1077-28-7) 0 % - 31.12.2023
0.7536 ex 2934 99 90 62 (2b,3a,5a,16b,17b)-2-(morpholin-4-yl)-16-(pyrrolidin-1-yl)androstane-3,17-diol 17-acetate (CAS RN 119302-24-8) 0 % - 31.12.2023
0.7537 ex 2934 99 90 63 (2b,3a,5a,16b,17b)-2-(morpholin-4-yl)-16-(pyrrolidin-1-yl)androstane-3,17-diol (CAS RN 119302-20-4) 0 % - 31.12.2023
0.7449 ex 2934 99 90 64 2-Bromo-5-benzoylthiophene (CAS RN 31161-46-3) 0 % - 31.12.2023
0.7926 ex 2934 99 90 65 Benzo[b]thiophen-10-methoxycycloheptanone (CAS RN 59743-84-9) with a purity by weight of 98 % or more 0 % - 31.12.2025
0.4512 ex 2934 99 90 66 Tetrahydrothiophene-1,1-dioxide (CAS RN 126-33-0) 0 % - 31.12.2023
0.7809 ex 2934 99 90 68 Afatinib dimaleate (INNM) (CAS RN 850140-73-7) 0 % - 31.12.2024
0.7842 ex 2934 99 90 69 3-methyl-5-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)benzo[d]oxazol-2(3H)-one (CAS RN 1220696-32-1) with a purity by weight of 95 % or more 0 % - 31.12.2024
0.7944 ex 2934 99 90 70 1,3,4-thiadiazolidine-2,5-dithione (CAS RN 1072-71-5) with a purity by weight of 95 % or more 0 % - 31.12.2025
0.8289 ex 2934 99 90 71 3,4-Dichloro-1,2,5-thiadiazole (CAS RN 5728-20-1) with a purity by weight of 99 % or more 0 % - 31.12.2026
0.7731 ex 2934 99 90 73 Tetrahydrouridine (CAS RN 18771-50-1) 0 % - 31.12.2024
0.4249 ex 2934 99 90 74 2-Isopropylthioxanthone (CAS RN 5495-84-1) 0 % - 31.12.2022
0.4052 ex 2934 99 90 75 (4R-cis)-1,1-Dimethylethyl-6-[2[2-(4-fluorophenyl)-5-(1-isopropyl)-3-phenyl-4-[(phenylamino)carbonyl]-1H-pyrrol-1-yl]ethyl]-2,2-dimethyl-1,3-dioxane-4-acetate (CAS RN 125971-95-1) 0 % - 31.12.2026
0.4058 ex 2934 99 90 ex 3204 20 00 76 10 2,5-Thiophenediylbis(5-tert-butyl-1,3-benzoxazole) (CAS RN 7128-64-5) 0 % - 31.12.2026
0.8221 ex 2934 99 90 77 Tazemetostat (INN) (CAS 1403254-99-8) with a purity by weight of 99 % or more and its salts 0 % - 31.12.2026
0.7579 ex 2934 99 90 78 [(3aS,5R,6S,6aS)-6-Hydroxy-2,2-dimethyltetrahydrofuro[2,3-d][1,3]dioxol-5-yl] (morpholino)methanone (CAS RN 1103738-19-7) 0 % - 31.12.2023
0.4388 ex 2934 99 90 79 Thiophen-2-ethanol (CAS RN 5402-55-1) 0 % - 31.12.2023
0.7657 ex 2934 99 90 80 2-(dimethylamino)-2-[(4-methylphenyl)methyl]-1-[4-(morpholin-4-yl)phenyl]butan-1-one (CAS RN 119344-86-4) 0 % - 31.12.2023
0.8048 ex 2934 99 90 81 1-(4-aminophenyl)-5-(morpholin-4-yl)-2,3-dihydropyridin-6-one (CAS RN 1267610-26-3) with a purity by weight of 98 % or more 0 % - 31.12.2025
0.7815 ex 2934 99 90 82 Rel-(3aR,12bR)-11-Chloro-2,3,3a,12b-tetrahydro-2-methyl-1H-dibenz[2,3:6,7]oxepino[4,5-c]pyrrol-1-one (CAS RN 129385-59-7) with a purity by weight of 97 % or more 0 % - 31.12.2024
0.4643 ex 2934 99 90 83 Flumioxazin (ISO) (CAS RN 103361-09-7) of a purity by weight of 96 % or more 0 % - 31.12.2024
0.4645 ex 2934 99 90 84 Etoxazole (ISO) (CAS RN 153233-91-1) of a purity by weight of 94,8 % or more 0 % - 31.12.2024
0.8222 ex 2934 99 90 85 Gilteritinib (INN) (CAS 1254053-43-4) with a purity by weight of 98 % or more and its salts 0 % - 31.12.2026
0.5133 ex 2934 99 90 86 Dithianon (ISO) (CAS RN 3347-22-6) 0 % - 31.12.2025
0.5136 ex 2934 99 90 87 2,2'-(1,4-Phenylene)bis(4H-3,1-benzoxazin-4-one) (CAS RN 18600-59-4) 0 % - 31.12.2025
0.7738 ex 2934 99 90 88 (7S,9aS)-7-((benzyloxy)methyl)octahydropyrazino[2,1-c][1,4]oxazine dioxalate (CAS RN 1268364-46-0) 0 % - 31.12.2024
0.6486 ex 2935 90 90 10 Florasulam (ISO) (CAS RN 145701-23-1) 0 % - 31.12.2024
0.3566 ex 2935 90 90 15 Flupyrsulfuron-methyl-sodium (ISO) (CAS RN 144740-54-5) 0 % - 31.12.2023
0.8173 ex 2935 90 90 18 4-Amino-2,5-dimethoxy-N-methylbenzenesulfonamide (CAS RN 49701-24-8) with a purity by weight of 98 % or more 0 % - 31.12.2026
0.8174 ex 2935 90 90 19 4-Amino-2,5-dimethoxy-N-phenylbenzenesulphonamide (CAS RN 52298-44-9) with a purity by weight of 98 % or more 0 % - 31.12.2026
0.3565 ex 2935 90 90 20 Toluenesulphonamides 0 % - 31.12.2023
0.8224 ex 2935 90 90 21 Encorafenib (INN) (CAS 1269440-17-6) with a purity by weight of 99 % or more 0 % - 31.12.2026
0.8276 ex 2935 90 90 22 Methyl 2-(chlorosulfonyl)-4-(methylsulfonamidomethyl)benzoate (CAS RN 393509-79-0) with a purity by weight of 90 % or more 0 % - 31.12.2026
0.5239 ex 2935 90 90 23 N-[4-(2-Chloroacetyl)phenyl]methanesulphonamide (CAS RN 64488-52-4) 0 % - 31.12.2026
0.8277 ex 2935 90 90 24 3-({[(4-methylphenyl)sulfonyl]carbamoyl}amino)phenyl 4-methylbenzenesulfonate (CAS RN 232938-43-1) with a purity by weight of 99 % or more 0 % - 31.12.2026
0.3563 ex 2935 90 90 25 Triflusulfuron-methyl (ISO) (CAS RN 126535-15-7) 0 % - 31.12.2023
0.5261 ex 2935 90 90 27 Methyl (3R,5S,6E)-7-{4-(4-fluorophenyl)-6-isopropyl-2-[methyl(methylsulfonyl)amino]pyrimidin-5-yl}-3,5-dihydroxyhept-6-enoate (CAS RN 147118-40-9) 0 % - 31.12.2026
0.5894 ex 2935 90 90 28 N-Fluorobenzenesulphonimide (CAS RN 133745-75-2) 0 % - 31.12.2023
0.7183 ex 2935 90 90 30 6-Aminopyridine-2-sulfonamide (CAS RN 75903-58-1) 0 % - 31.12.2026
0.7677 ex 2935 90 90 33 4-Chloro-3-pyridinesulphonamide (CAS RN 33263-43-3) 0 % - 31.12.2023
0.3564 ex 2935 90 90 35 Chlorsulfuron (ISO) (CAS RN 64902-72-3) 0 % - 31.12.2023
0.7572 ex 2935 90 90 37 1,3-Dimethyl-1H-pyrazole-4-sulfonamide (CAS RN 88398-53-2) 0 % - 31.12.2023
0.7438 ex 2935 90 90 40 Venetoclax (INN) (CAS 1257044-40-8) 0 % - 31.12.2022
0.5036 ex 2935 90 90 42 Penoxsulam (ISO) (CAS RN 219714-96-2) 0 % - 31.12.2025
0.6370 ex 2935 90 90 43 Oryzalin (ISO) (CAS RN 19044-88-3) 0 % - 31.12.2024
0.7928 ex 2935 90 90 44 4-[2-(7-Methoxy-4,4-dimethyl-1,3-dioxo-3,4-dihydroisoquinolin-2(1H)-yl)ethyl]bezenesulphonamide (CAS RN 33456-68-7) with a purity by weight of 99,5 % or more 0 % - 31.12.2025
0.3562 ex 2935 90 90 45 Rimsulfuron (ISO) (CAS RN 122931-48-0) 0 % - 31.12.2023
0.6242 ex 2935 90 90 47 Halosulfuron-methyl (ISO) (CAS RN 100784-20-1) with a purity by weight of 98 % or more 0 % - 31.12.2024
0.5451 ex 2935 90 90 48 (3R,5S,6E)-7-[4-(4-Fluorophenyl)-2-[methyl(methylsulfonyl)amino]-6-(propan-2-yl)pyrimidin-5-yl]-3,5-dihydroxyhept-6-enoic acid -- 1-[(R)-(4-chlorophenyl)(phenyl)methyl]piperazine (1:1) (CAS RN 1235588-99-4) 0 % - 31.12.2026
0.2843 ex 2935 90 90 50 4,4'-Oxydi(benzenesulphonohydrazide) (CAS RN 80-51-3) 0 % - 31.12.2023
0.4636 ex 2935 90 90 53 2,4-Dichloro-5-sulphamoylbenzoic acid (CAS RN 2736-23-4) 0 % - 31.12.2024
0.6777 ex 2935 90 90 54 Propoxycarbazone-sodium (ISO) (CAS RN 181274-15-7) with a purity by weight of 95 % or more 0 % - 31.12.2025
0.3560 ex 2935 90 90 55 Thifensulfuron-methyl (ISO) (CAS RN 79277-27-3) 0 % - 31.12.2023
0.6802 ex 2935 90 90 56 N-(p-Toluenesulphonyl)-N'-(3-(p-toluenesulphonyloxy)phenyl)urea (CAS RN 232938-43-1) 0 % - 31.12.2025
0.6903 ex 2935 90 90 57 N-{2-[(phenylcarbamoyl)amino]phenyl}benzenesulphonamide (CAS RN 215917-77-4) 0 % - 31.12.2025
0.6664 ex 2935 90 90 59 Flazasulfuron (ISO) (CAS RN 104040-78-0) with a purity of 94 % by weight or more 0 % - 31.12.2025
0.7676 ex 2935 90 90 60 4-[(3-Methylphenyl)amino]pyridine-3-sulfonamide (CAS RN 72811-73-5) 0 % - 31.12.2023
0.4586 ex 2935 90 90 63 Nicosulphuron (ISO), (CAS RN 111991-09-4) of a purity by weight of 91 % or more 0 % - 31.12.2024
0.3561 ex 2935 90 90 65 Tribenuron-methyl (ISO) (CAS RN 101200-48-0) 0 % - 31.12.2023
0.7854 ex 2935 90 90 70 (4S)-4-hydroxy-2-(3-methoxypropyl)-3,4-dihydro-2H-thieno[3,2-e]thiazine-6-sulfonamide-1,1-dioxide (CAS RN 154127-42-1) with a purity by weight of 97 % or more 0 % - 31.12.2024
0.5539 ex 2935 90 90 73 (2S)-2-Benzyl-N,N-dimethylaziridine-1-sulfonamide (CAS RN 902146-43-4) 0 % - 31.12.2022
0.3559 ex 2935 90 90 75 Metsulfuron-methyl (ISO) (CAS RN 74223-64-6) 0 % - 31.12.2023
0.8055 ex 2935 90 90 80 4-Chloro-3-sulphamoylbenzoic acid (CAS RN 1205-30-7) with a purity by weight of 97 % or more 0 % - 31.12.2025
0.2844 ex 2935 90 90 85 N-[4-(Isopropylaminoacetyl)phenyl]methanesulphonamide hydrochloride 0 % - 31.12.2024
0.3704 ex 2935 90 90 88 N-(2-(4-Amino-N-ethyl-m-toluidino)ethyl)methanesulphonamide sesquisulphate monohydrate (CAS RN 25646-71-3) 0 % - 31.12.2023
0.4048 ex 2935 90 90 89 3-(3-Bromo-6-fluoro-2-methylindol-1-ylsulphonyl)-N,N-dimethyl-1,2,4-triazol-1-sulphonamide (CAS RN 348635-87-0) 0 % - 31.12.2026
0.4944 ex 2938 90 30 10 Ammonium glycyrrhizate (CAS RN 53956-04-0) 0 % - 31.12.2025
0.3554 ex 2938 90 90 10 Hesperidin (CAS RN 520-26-3) 0 % - 31.12.2023
0.5927 ex 2938 90 90 20 Ethylvanillin beta-D-glucopyranoside (CAS RN 122397-96-0) 0 % - 31.12.2023
0.7329 ex 2938 90 90 30 Rebaudioside A (CAS RN 58543-16-1) 0 % - 31.12.2022
0.7327 ex 2938 90 90 40 Purified steviol glycoside with a rebaudioside M (CAS RN 1220616-44-3) content of 80 % or more but not more than 90 % by weight for use in the manufacture of non-alcoholic beverages (1) 0 % - 31.12.2022
0.8178 ex 2939 79 90 50 1-Alpha-H,5-alpha-H-Nortropan-3-alpha-ol (CAS RN 538-09-0) with a purity by weight of 99 % or more 0 % - 31.12.2026
0.7456 ex 2939 79 90 60 4-methyl-2-pyridylamine (CAS RN 695-34-1) with a purity by weight of 98 % or more 0 % - 31.12.2023
0.7047 ex 2940 00 00 30 D(+)- Trehalose dihydrate (CAS RN 6138-23-4) 0 % - 31.12.2026
0.7757 ex 2940 00 00 50 2,3,4,6-Tetrakis-O-(phenylmethyl)-D-galactopyranose (CAS RN 6386-24-9) 0 % - 31.12.2024
0.5233 ex 2941 20 30 10 Dihydrostreptomycin sulphate (CAS RN 5490-27-7) 0 % - 31.12.2026
0.6984 ex 2942 00 00 10 Sodium triacetoxyborohydride (CAS RN 56553-60-7) 0 % - 31.12.2026
0.3555 3201 20 00 Wattle extract 0 % - 31.12.2023
0.7943 ex 3201 90 20 10 Rhus chinensis gall (Galla chinensis) water-based extract, with a tannin content by weight of 85 % or less 0 % - 31.12.2025
0.3553 ex 3201 90 90 20 Tanning extracts derived from gambier and myrobalan fruits 0 % - 31.12.2023
0.6600 ex 3201 90 90 ex 3202 90 00 40 10 Reaction product of Acacia mearnsii extract, ammonium chloride and formaldehyde (CAS RN 85029-52-3) 0 % - 31.12.2022
0.6183 ex 3204 11 00 15 Colourant C.I. Disperse Blue 360 (CAS RN 70693-64-0) and preparations based thereon with a colourant C.I. Disperse Blue 360 content of 99 % or more by weight 0 % - 31.12.2023
0.6277 ex 3204 11 00 25 N-(2-Chloroethyl)-4-[(2,6-dichloro-4-nitrophenyl)azo]-N-ethyl-m-toluidine (CAS RN 63741-10-6) 0 % - 31.12.2024
0.7307 ex 3204 11 00 35 Colourant C.I Disperse Yellow 232 (CAS RN 35773-43-4) and preparations based thereon with a colourant C.I Disperse Yellow 232 of 50 % or more by weight 0 % - 31.12.2022
0.5235 ex 3204 11 00 40 Colourant C.I. Disperse Red 60 (CAS RN 17418-58-5) and preparations based thereon with a colourant C.I. Disperse Red 60 content of 50 % or more by weight 0 % - 31.12.2022
0.5134 ex 3204 11 00 45 Preparation of dispersion dyes, containing: — C.I. Disperse Orange 61 (CAS RN 12270-45-0) or Disperse Orange 288 (CAS RN 96662-24-7), — C.I. Disperse Blue 291:1 (CAS RN 872142-01-3), — C.I. Disperse Violet 93:1 (CAS RN 122463-28-9), whether or not containing C.I. Disperse Red 54 (CAS RN 6657-37-0) 0 % - 31.12.2025
0.5264 ex 3204 11 00 50 Colourant C.I. Disperse Blue 72 (CAS RN 81-48-1) and preparations based thereon with a colourant C.I. Disperse Blue 72 content of 95 % or more by weight 0 % - 31.12.2022
0.5236 ex 3204 11 00 60 Colourant C.I. Disperse Blue 359 (CAS RN 62570-50-7) and preparations based thereon with a colourant C.I. Disperse Blue 359 content of 50 % or more by weight 0 % - 31.12.2022
0.5440 ex 3204 12 00 10 Colourant C.I. Acid Blue 9 (CAS RN 2650-18-2) and preparations based thereon with a colourant C.I. Acid Blue 9 content of 50 % or more by weight 0 % - 31.12.2022
0.6972 ex 3204 12 00 15 Colourant C.I. Acid Brown 75 (CAS RN 8011-86-7) and preparations based thereon with a colourant C.I. Acid Brown 75 content of 75 % or more by weight 0 % - 31.12.2026
0.6975 ex 3204 12 00 17 Colourant C.I. Acid Brown 355 (CAS RN 84989-26-4 or 60181-77-3) and preparations based thereon with a colourant C.I. Acid Brown 355 content of 75 % or more by weight 0 % - 31.12.2026
0.7021 ex 3204 12 00 25 Colourant C.I. Acid Black 210 (CAS RN 85223-29-6 or 99576-15-5) and preparations based thereon with a colourant C.I. Acid Black 210 content of 50 % or more by weight 0 % - 31.12.2026
0.6976 ex 3204 12 00 27 Colourant C.I. Acid Brown 425 (CAS RN 75234-41-2 or 119509-49-8) and preparations based thereon with a colourant C.I. Acid Brown 425 content of 75 % or more by weight 0 % - 31.12.2026
0.6963 ex 3204 12 00 35 Colourant C.I. Acid Black 234 (CAS RN 157577-99-6) and preparations based thereon with a colourant C.I. Acid Black 234 content of 75 % or more by weight 0 % - 31.12.2026
0.6964 ex 3204 12 00 37 Colourant C.I. Acid Black 210 sodium salt (CAS RN 201792-73-6) and preparations based thereon with a colourant C.I. Acid Black 210 sodium salt content of 50 % or more by weight 0 % - 31.12.2026
0.5925 ex 3204 12 00 40 Liquid dye preparation containing anionic acid dye C.I. Acid Blue 182 (CAS RN 12219-26-0) 0 % - 31.12.2023
0.6965 ex 3204 12 00 45 Colourant C.I. Acid Blue 161/193 (CAS RN 12392-64-2) and preparations based thereon with a colourant C.I. Acid Blue 161/193 content of 75 % or more by weight 0 % - 31.12.2026
0.6971 ex 3204 12 00 47 Colourant C.I. Acid Brown 58 (CAS RN 70210-34-3 or 12269-87-3) and preparations based thereon with a colourant C.I. Acid Brown 58 content of 75 % or more by weight 0 % - 31.12.2026
0.6973 ex 3204 12 00 55 Colourant C.I. Acid Brown 165 (CAS RN 61724-14-9) and preparations based thereon with a colourant C.I. Acid Brown 165 content of 75 % or more by weight 0 % - 31.12.2026
0.6974 ex 3204 12 00 57 Colourant C.I. Acid Brown 282 (CAS RN 70236-60-1 or 12219-65-7) and preparations based thereon with a colourant C.I. Acid Brown 282 content of 75 % or more by weight 0 % - 31.12.2026
0.6535 ex 3204 12 00 60 Colourant C.I. Acid Red 52 (CAS RN 3520-42-1 ) and preparations based thereon with a colourant C.I. Acid Red 52 content of 97 % or more by weight 0 % - 31.12.2024
0.6977 ex 3204 12 00 65 Colourant C.I. Acid Brown 432 (CAS RN 119509-50-1) and preparations based thereon with a colourant C.I. Acid Brown 432 content of 75 % or more by weight 0 % - 31.12.2026
0.6652 ex 3204 12 00 70 Colourant C.I. Acid blue 25 (CAS RN 6408-78-2) and preparations based thereon with a colourant C.I. Acid blue 25 content of 80 % or more by weight 0 % - 31.12.2025
0.4065 ex 3204 13 00 10 Colourant C.I. Basic Red 1 (CAS RN 989-38-8) and preparations based thereon with a colourant C.I. Basic Red 1 content of 50 % or more by weight 0 % - 31.12.2023
0.7394 ex 3204 13 00 15 Colourant C.I. Basic Blue 41 (CAS RN 12270-13-2) and preparations based thereon with a colourant C.I. Basic Blue 41 content of 50 % or more by weight 0 % - 31.12.2022
0.7395 ex 3204 13 00 25 Colourant C.I. Basic Red 46 (CAS RN 12221-69-1) and preparations based thereon with a colourant C.I. Basic Red 46 content of 20 % or more by weight 0 % - 31.12.2022
0.5804 ex 3204 13 00 30 Colourant C.I. Basic Blue 7 (CAS RN 2390-60-5) and preparations based thereon with a colourant C.I. Basic Blue 7 content of 50 % or more by weight 0 % - 31.12.2023
0.7396 ex 3204 13 00 35 Colourant C.I. Basic Yellow 28 (CAS RN 54060-92-3) and preparations based thereon with a colourant C.I. Basic Yellow 28 content of 50 % or more by weight 0 % - 31.12.2022
0.5805 ex 3204 13 00 40 Colourant C.I. Basic Violet 1 (CAS RN 603-47-4 or CAS RN 8004-87-3) and preparations based thereon with a colourant C.I. Basic Violet 1 content of 90 % or more by weight 0 % - 31.12.2022
0.7398 ex 3204 13 00 45 Mixture of colourant C.I. Basic Blue 3 (CAS RN 33203-82-6) and colourant C.I. Basic Blue 159 (CAS RN 105953-73-9) with a colourant Basic Blue content of 40 % or more by weight 0 % - 31.12.2022
0.6474 ex 3204 13 00 50 Colourant C.I Basic Violet 11 (CAS RN 2390-63-8) and preparations based thereon with a colourant C.I Basic Violet 11 content of 90 % or more by weight 0 % - 31.12.2024
0.7775 ex 3204 13 00 55 Colourant C.I. Basic Violet 16 (CAS RN 6359-45-1) and preparations based thereon with a colourant C.I. Basic Violet 16 content of 60 % or more by weight 0 % - 31.12.2024
0.6475 ex 3204 13 00 60 Colourant C.I Basic Red 1:1 (CAS RN 3068-39-1) and preparations based thereon with a colourant C.I Basic Red 1:1 content of 90 % or more by weight 0 % - 31.12.2024
0.7776 ex 3204 13 00 65 Colourant C.I. Basic Blue 3 (CAS RN 33203-82-6) and preparations based thereon with a colourant C.I. Basic Blue 3 (CAS RN 33203-82-6) content of 50 % or more but not more than 80 % by weight 0 % - 31.12.2024
0.7777 ex 3204 13 00 70 Mixture of the colourants C.I. Basic Yellow 28 (CAS RN 54060-92-3), C.I. Basic Red 46 (CAS RN 12221-69-1) and C.I. Basic Blue 159 (CAS RN 105953-73-9) and preparations based thereon with a content of colourants C.I. Basic Yellow 28, C.I. Basic Red 46 and C.I. Basic Blue 159 taken together of 60 % or more by weight 0 % - 31.12.2024
0.7778 ex 3204 13 00 75 Colourant C.I. Basic Red 18:1 (CAS RN 12271-12-4) and preparations based thereon with a content of 40 % or more by weight 0 % - 31.12.2024
0.7779 ex 3204 13 00 80 Colourant C.I. Basic Yellow (CAS RN 83949-75-1) and preparations based thereon with a content of 40 % or more by weight 0 % - 31.12.2024
0.6569 ex 3204 14 00 10 Colourant C.I. Direct Black 80 (CAS RN 8003-69-8) and preparations based thereon with a colourant C.I. Direct Black 80 content of 90 % or more by weight 0 % - 31.12.2024
0.6570 ex 3204 14 00 20 Colourant C.I. Direct Blue 80 (CAS RN 12222-00-3) and preparations based thereon with a colourant C.I. Direct Blue 80 content of 90 % or more by weight 0 % - 31.12.2024
0.6571 ex 3204 14 00 30 C.I. Colourant Direct Red 23 (CAS RN 3441-14-3 ) and preparations based thereon with a colourant C.I. Direct Red 23 content of 90 % or more by weight 0 % - 31.12.2024
0.3997 ex 3204 15 00 60 Colourant C.I. Vat Blue 4 (CAS RN 81-77-6) and preparations based thereon with a colourant C.I. Vat Blue 4 content of 50 % or more by weight 0 % - 31.12.2023
0.6129 ex 3204 15 00 70 Colourant C.I. Vat Red 1 (CAS RN 2379-74-0) 0 % - 31.12.2023
0.6325 ex 3204 16 00 30 Preparations based on Colourant Reactive Black 5 (CAS RN 17095-24-8) with a content thereof of 60 % or more but not more than 75 % by weight, and including one or more of the following: — Colourant Reactive Yellow 201 (CAS RN 27624-67-5), — 1-Naphthalenesulphonicacid,4-amino-3-[[4-[[2-(sulphooxy)ethyl]sulphonyl]phenyl]azo]-, disodium salt (CAS RN 250688-43-8), or — 3,5-diamino-4-[[4-[[2-(sulphooxy)ethyl]sulphonyl]fenyl]azo]-2-[[2-sulfo-4-[[2-(sulphooxy)ethyl]sulfonyl]phenyl]azobenzoic acid sodium salt (CAS RN 906532-68-1) 0 % - 31.12.2024
0.7367 ex 3204 16 00 40 Aqueous solution of Colourant C.I. Reactive Red 141 (CAS RN 61931-52-0) — with a colourant C.I. Reactive Red 141 content of 13 % or more by weight, and — containing a preservative 0 % - 31.12.2022
0.2517 ex 3204 17 00 10 Colourant C.I. Pigment Yellow 81 (CAS RN 22094-93-5) and preparations based thereon with a colourant C.I. Pigment Yellow 81 content of 50 % or more by weight 0 % - 31.12.2023
0.5433 ex 3204 17 00 15 Colourant C.I. Pigment Green 7 (CAS RN 1328-53-6) and preparations based thereon with a colourant C.I. Pigment Green 7 content of 40 % or more by weight 0 % - 31.12.2026
0.7092 ex 3204 17 00 18 Colourant C.I. Pigment Orange 16 (CAS RN 6505-28-8) and preparations based thereon with a colourant C.I. Pigment Orange 16 content of 90 % or more by weight 0 % - 31.12.2026
0.6130 ex 3204 17 00 19 Colourant C.I. Pigment Red 48:2 (CAS RN 7023-61-2) and preparations based thereon with a colourant C.I. Pigment Red 48:2 content of 85 % or more by weight 0 % - 31.12.2023
0.5505 ex 3204 17 00 20 Colourant C.I. Pigment Blue 15:3 (CAS RN 147-14-8) and preparations based thereon with a colourant C.I. Pigment Blue 15:3 content of 35 % or more by weight 0 % - 31.12.2026
0.6279 ex 3204 17 00 21 Colourant C.I. Pigment Blue 15:4 (CAS RN 147-14-8) and preparations based thereon with a colourant C.I. Pigment Blue 15:4 content of 35 % or more by weight 0 % - 31.12.2024
0.5259 ex 3204 17 00 22 Colourant C.I. Pigment Red 169 (CAS RN 12237-63-7) and preparations based thereon with a colourant C.I. Pigment Red 169 content of 50 % or more by weight 0 % - 31.12.2026
0.6246 ex 3204 17 00 23 Colourant C.I. Pigment Brown 41 (CAS RN 211502-16-8 or CAS RN 68516-75-6) 0 % - 31.12.2024
0.6453 ex 3204 17 00 24 Colourant C.I. Pigment Red 57:1 (CAS RN 5281-04-9) and preparations based thereon with a Colourant C.I. Pigment Red 57:1 content of 20 % or more by weight 0 % - 31.12.2023
0.5427 ex 3204 17 00 25 Colourant C.I. Pigment Yellow 14 (CAS RN 5468-75-7) and preparations based thereon with a colourant C.I. Pigment Yellow 14 content of 25 % or more by weight 0 % - 31.12.2026
0.7261 ex 3204 17 00 26 Colourant C.I. Pigment Orange 13 (CAS RN 3520-72-7) and preparations based thereon with a colourant C.I. Pigment Orange 13 content of 80 % or more by weight 0 % - 31.12.2022
0.7391 ex 3204 17 00 29 Colourant C.I. Pigment Red 268 (CAS RN 16403-84-2) and preparations based thereon with a Colourant C.I. Pigment Red 268 content of 80 % or more by weight 0 % - 31.12.2022
0.7659 ex 3204 17 00 31 Colourant C.I. Pigment Red 63:1 (CAS RN 6417-83-0) and preparations based thereon with a colourant C.I. Pigment Red 63:1 content of 70 % or more by weight 0 % - 31.12.2023
0.6603 ex 3204 17 00 33 Colourant C.I. Pigment Blue 15:1 (CAS RN 147-14-8) and preparations based thereon with a colourant C.I. Pigment Blue 15:1 content of 35 % or more by weight 0 % - 31.12.2025
0.5426 ex 3204 17 00 35 Colourant C.I. Pigment Red 202 (CAS RN 3089-17-6) and preparations based thereon with a colourant C.I. Pigment Red 202 content of 70 % or more by weight 0 % - 31.12.2026
0.7565 ex 3204 17 00 37 Colourant C.I. Pigment Red 81:2 (CAS RN 75627-12-2) and preparations based thereon with a colourant C.I. Pigment Red 81:2 content of 30 % or more by weight 0 % - 31.12.2023
0.4630 ex 3204 17 00 40 Colourant C.I. Pigment Yellow 120 (CAS RN 29920-31-8) and preparations based thereon with a colourant C.I. Pigment Yellow 120 content of 50 % or more by weight 0 % - 31.12.2024
0.6452 ex 3204 17 00 45 Colourant C.I. Pigment Yellow 174 (CAS RN 78952-72-4), highly resinated pigment (approx. 35 % disproportionate resin), with a purity of 98 % by weight or more, in the form of extruded beads with a moisture content of not more than 1 % by weight 0 % - 31.12.2023
0.5832 ex 3204 17 00 75 Colourant C.I. Pigment Orange 5 (CAS RN 3468-63-1) and preparations based thereon with a colourant C.I. Pigment Orange 5 content of 80 % or more by weight 0 % - 31.12.2022
0.5645 ex 3204 17 00 80 Colourant C.I. Pigment Red 207 (CAS RN 71819-77-7) and preparations based thereon with a colourant C.I. Pigment Red 207 content of 50 % or more by weight 0 % - 31.12.2022
0.5700 ex 3204 17 00 85 Colourant C.I. Pigment Blue 61 (CAS RN 1324-76-1) and preparations based thereon with a colourant C.I. Pigment Blue 61 content of 35 % or more by weight 0 % - 31.12.2022
0.5680 ex 3204 17 00 88 Colourant C.I. Pigment Violet 3 (CAS RN 1325-82-2 or CAS RN 101357-19-1) and preparations based thereon with a colourant C.I. Pigment Violet 3 content of 90 % or more by weight 0 % - 31.12.2022
0.6979 ex 3204 19 00 13 Colourant C.I. Sulphur Black 1 (CAS RN 1326-82-5) and preparations based thereon with a colourant C.I. Sulphur Black 1 content of 75 % or more by weight 0 % - 31.12.2026
0.6406 ex 3204 19 00 14 Red colourant preparation, in a form of wet paste, containing by weight: — 35 % or more but not more than 40 % of 1-[[4-(phenylazo)phenyl]azo]naphthalen-2-ol methyl derivatives (CAS RN 70879-65-1) — not more than 3 % of 1-(phenylazo)naphthalen-2-ol (CAS RN 842-07-9) — not more than 3 % of 1-[(2-methylphenyl)azo]naphthalen-2-ol (CAS RN 2646-17-5) — 55 % or more but not more than 65 % of water 0 % - 31.12.2024
0.7262 ex 3204 19 00 16 Colourant C.I Solvent Yellow 133 (CAS RN 51202-86-9) and preparations based thereon with a colourant C.I. Solvent Yellow 133 content of 97 % or more by weight 0 % - 31.12.2022
0.5100 ex 3204 19 00 73 Colourant C.I. Solvent Blue 104 (CAS RN 116-75-6) and preparations based thereon with a colourant C.I. Solvent Blue 104 content of 97 % or more by weight 0 % - 31.12.2026
0.5282 ex 3204 19 00 77 Colourant C.I. Solvent Yellow 98 (CAS RN 27870-92-4 or CAS RN 12671-74-8) and preparations based thereon with a colourant C.I. Solvent Yellow 98 content of 95 % or more by weight 0 % - 31.12.2026
0.5671 ex 3204 19 00 84 Colourant C.I. Solvent Blue 67 (CAS RN 12226-78-7) and preparations based thereon with a colourant C.I. Solvent Blue 67 content of 98 % or more by weight 0 % - 31.12.2022
0.5395 ex 3204 20 00 30 Colourant C.I. Fluorescent Brightener 351 (CAS RN 27344-41-8) and preparations based thereon with a colourant C.I. Fluorescent Brightener 351 content of 90 % or more by weight 0 % - 31.12.2026
0.6473 ex 3204 90 00 10 Colourant C.I Solvent Yellow 172 (also known as C.I. Solvent Yellow 135) (CAS RN 68427-35-0) and preparations based thereon with a colourant C.I Solvent Yellow 172 (also known as C.I. Solvent Yellow 135) content of 90 % or more by weight 0 % - 31.12.2024
0.7326 ex 3204 90 00 20 Preparations of colourant C.I. Solvent Red 175 (CAS RN 68411-78-6) in petroleum distillates, hydrotreated light naphthenic (CAS RN 64742-53-6), containing by weight 40 % or more but not more than 60 % of a colourant C.I. Solvent Red 175 0 % - 31.12.2022
0.3707 ex 3205 00 00 10 Aluminium lakes prepared from dyes for use in the manufacture of pigments for the pharmaceutical industry (1) 0 % - 31.12.2023
0.7658 ex 3205 00 00 20 Colourant C.I. Solvent Red 48 (CAS RN 13473-26-2) preparation, in a form of dry powder, containing by weight: — 16 % or more but not more than 25 % of Colourant C.I. Solvent Red 48 (CAS RN 13473-26-2) — 65 % or more but not more than 75 % of aluminium hydroxide (CAS RN 21645-51-2) 0 % - 31.12.2023
0.7699 ex 3205 00 00 30 Colourant C.I. Pigment Red 174 (CAS RN 15876-58-1) preparation, in a form of dry powder, containing by weight: — 16 % or more but not more than 21 % of Colourant C.I. Pigment Red 174 (CAS RN 15876-58-1) — 65 % or more but not more than 69 % of aluminium hydroxide (CAS RN 21645-51-2) 0 % - 31.12.2023
0.3550 ex 3206 11 00 10 Titanium dioxide coated with isopropoxytitanium triisostearate, containing by weight 1,5 % or more but not more than 2,5 % of isopropoxytitanium triisostearate 0 % - 31.12.2023
0.5378 ex 3206 19 00 10 Preparation containing by weight: — 72 % (± 2 %) of mica (CAS RN 12001-26-2), and — 28 % (± 2 %) of titanium dioxide (CAS RN 13463-67-7) 0 % - 31.12.2026
0.3551 ex 3206 42 00 10 Lithopone (CAS RN 1345-05-7) 0 % - 31.12.2023
0.6245 ex 3206 49 70 20 Colourant C.I. Pigment Blue 27 (CAS RN 14038-43-8) 0 % - 31.12.2024
0.7305 ex 3206 49 70 30 Colourant C.I. Pigment Black 12 (CAS RN 68187-02-0) and preparations based thereon with a C.I. Pigment Black 12 content of 50 % or more by weight 0 % - 31.12.2022
0.7390 ex 3206 49 70 40 Colourant C.I. Pigment Blue 27 (CAS RN 25869-00-5) and preparations thereon with a colourant C.I. Pigment Blue 27 content of 85 % or more by weight 0 % - 31.12.2022
0.8211 ex 3206 49 70 50 Concentrated mixture of pigments (masterbatch) in the form of pellets containing by weight: — 50 % or more but not more than 70 % of polyamide-6.6 (CAS RN 32131-17-2), — 15 % or more but not more than 20 % of iron powder (CAS RN 7439-89-6), — 5 % or more but not more than 15 % of barium sulphate (CAS RN 7727-43-7), and — 5 % or more but not more than 10 % of blue pigment, consisting of a mixture of Titanium dioxide (CAS RN 13463-67-7) and Copper(II) phtalocyanine(CAS RN 147-14-8) 0 % - 31.12.2026
0.3673 3206 50 00 Inorganic products of a kind used as luminophores 0 % - 31.12.2023
0.6233 ex 3207 30 00 20 Printing paste containing — 30 % by weight or more, but not more than 50 % of silver and — 8 % by weight or more, but not more than 17 % of palladium 0 % - 31.12.2024
0.5830 ex 3207 40 85 40 Glass flakes (CAS RN 65997-17-3): — of a thickness of 0,3 μm or more but not more than 10 μm, and — coated with titanium dioxide (CAS RN 13463-67-7) or iron oxide (CAS RN 18282-10-5) 0 % - 31.12.2022
0.2511 ex 3208 20 10 10 Copolymer of N-vinylcaprolactam, N-vinyl-2-pyrrolidone and dimethylaminoethyl methacrylate, in the form of a solution in ethanol containing by weight 34 % or more but not more than 40 % of copolymer 0 % - 31.12.2023
0.4511 ex 3208 20 10 20 Immersion topcoat solution containing by weight 0,5 % or more but not more than 15 % of acrylate-methacrylate-alkenesulphonate copolymers with fluorinated side chains, in a solution of n-butanol and/or 4-methyl-2-pentanol and/or diisoamylether 0 % - 31.12.2023
0.8137 ex 3208 90 19 ex 3911 90 99 13 63 Mixture, containing by weight: — 20 % or more but not more than 40 % of a copolymer of methyl vinyl ether and monobutyl maleate (CAS RN 25119-68-0), — 7 % or more but not more than 20 % of a copolymer of methyl vinyl ether and monoethyl maleate (CAS RN 25087-06-3), — 40 % or more, but not more than 65 % of ethanol (CAS RN 64-17-5), — 1 % or more but not more than 7 % of butan-1-ol (CAS RN 71-36-3) 0 % - 31.12.2025
0.3967 ex 3208 90 19 15 Chlorinated polyolefins, in a solution 0 % - 31.12.2023
0.5564 ex 3208 90 19 ex 3904 69 80 25 89 Tetrafluoroethylene copolymer in butylacetate solution with a content of solvent of 50 % (± 2 %) by weight 0 % - 31.12.2022
0.2504 ex 3208 90 19 40 Polymer of methylsiloxane, in the form of a solution in a mixture of acetone, butanol, ethanol and isopropanol, containing by weight 5 % or more but not more than 11 % of polymer of methylsiloxane 0 % - 31.12.2023
0.6154 ex 3208 90 19 ex 3824 99 92 45 63 Polymer consisting of a polycondensate of formaldehyde and naphthalenediol, chemically modified by reaction with an alkyne halide, dissolved in propylene glycol methyl ether acetate 0 % - 31.12.2023
0.6989 ex 3208 90 19 47 Solution containing by weight: — 0,1 % or more but not more than 20 % of alkoxygroups containing siloxane polymer with alkyl or aryl substituents — 75 % or more of an organic solvent containing one or more of propyleneglycolethylether (CAS RN 1569-02-4), propylene glycol mono methylether acetate (CAS RN 108-65-6) or propyleneglycol propylether (CAS RN 1569-01-3) 0 % - 31.12.2026
0.2502 ex 3208 90 19 50 Solution containing by weight: — (65 ± 10) % of γ-butyrolactone, — (30 ± 10) % of polyamide resin, — (3,5 ± 1,5) % of naphthoquinone ester derivative and — (1,5 ± 0,5) % of arylsilicic acid 0 % - 31.12.2023
0.6726 ex 3208 90 19 55 Preparation of 5 % or more but not more than 20 % by weight of a copolymer of propylene and maleic anhydride, or a blend of polypropylene and a copolymer of propylene and maleic anhydride, or a blend of polypropylene and a copolymer of propylene, isobutene and maleic anhydride in an organic solvent 0 % - 31.12.2026
0.4037 ex 3208 90 19 60 Copolymer of hydroxystyrene with one or more of the following: — styrene — alkoxystyrene — alkylacrylates dissolved in ethyl lactate 0 % - 31.12.2026
0.6005 ex 3208 90 19 65 Silicones containing 50 % by weight or more of xylene and not more than 25 % by weight of silica, of a kind used for the manufacture of long term surgical implants 0 % - 31.12.2024
0.4301 ex 3208 90 19 75 Acenaphthalene copolymer in ethyl lactate solution 0 % - 31.12.2022
0.5777 ex 3215 19 00 20 Ink: — consisting of a polyester polymer and a dispersion of silver (CAS RN 7440-22-4) and silver chloride (CAS RN 7783-90-6) in methyl propyl ketone (CAS RN 107-87-9), — with a total solid content by weight of 55 % or more, but not more than 57 %, and — with a specific density of 1,40 g/cm3 or more, but not more than 1,60 g/cm3, for use in the manufacture of electrodes (1) 0 % l 31.12.2022
0.2506 ex 3215 90 70 10 Ink formulation, for use in the manufacture of ink-jet cartridges (1) 0 % - 31.12.2023
0.2501 ex 3215 90 70 20 Heat sensitive ink fixed on a plastic film 0 % - 31.12.2023
0.4533 ex 3215 90 70 30 Disposable cartridge ink, containing by weight: — 1 % or more, but not more than 10 % of amorphous silicon dioxide or — 3,8 % or more of dye C.I. Solvent Black 7 in organic solvents for use in the marking of integrated circuits (1) 0 % - 31.12.2023
0.5031 ex 3215 90 70 40 Dry ink powder with a base of hybrid resin (made from polystyrene acrylic resin and polyester resin) mixed with: — wax — a vinyl-based polymer and — a colouring agent for use in the manufacture of toner bottles for photocopiers, fax machines, printers and multifunction devices (1) 0 % - 31.12.2025
0.3661 3301 12 10 Essential oil of orange, not deterpenated 0 % - 31.12.2023
0.4863 ex 3402 39 90 10 Sodium lauroyl methyl isethionate 0 % - 31.12.2026
0.4002 ex 3402 42 00 10 Vinyl copolymer surface active agent based on polypropylene glycol 0 % - 31.12.2023
0.4277 ex 3402 42 00 20 Surfactant containing 1,4-dimethyl-1,4-bis(2-methylpropyl)-2-butyne-1,4-diyl ether, polymerised with oxirane, methyl terminated 0 % - 31.12.2022
0.6285 ex 3402 90 10 10 Surface-active mixture of methyltri-C8-C10-alkylammonium chlorides 0 % - 31.12.2024
0.3660 ex 3402 90 10 20 Mixture of docusate sodium (INN) and sodium benzoate 0 % - 31.12.2023
0.4676 ex 3402 90 10 70 Surface-active preparation, containing ethoxylated 2,4,7,9-tetramethyl-5-decyne-4,7-diol (CAS RN 9014-85-1) 0 % - 31.12.2024
0.7508 ex 3501 90 90 10 Non edible sodium caseinate (CAS RN 9005-46-3) in the form of powder with a protein content of more than 88 % by weight for use in the production of thermoplastic granules 0 % - 31.12.2023
0.2498 ex 3506 91 90 10 Adhesive based on an aqueous dispersion of a mixture of dimerised rosin and a copolymer of ethylene and vinyl acetate (EVA) 0 % - 31.12.2023
0.4003 ex 3506 91 90 30 Two component microencapsulated epoxy adhesive dispersed in a solvent 0 % - 31.12.2023
0.4313 ex 3506 91 90 40 Acrylic pressure sensitive adhesive with a thickness of 0,076 mm or more but not more than 0,127 mm, put up in rolls of a width of 45,7 cm or more but not more than 132 cm supplied on a release liner with an initial peel adhesion release value of not less than 15 N/25 mm (measured according to ASTM D 3330) 0 % - 31.12.2024
0.6725 ex 3506 91 90 50 Preparation containing by weight: — 15 % or more but not more than 60 % of styrene butadiene copolymers or styrene isoprene copolymers, and — 10 % or more but not more than 30 % of pinene polymers or pentadiene copolymers, dissolved in: — Methyl ethyl ketone (CAS RN 78-93-3), — Heptane (CAS RN 142-82-5), and — Toluene (CAS RN 108-88-3) or light aliphatic solvent naphtha (CAS RN 64742-89-8) 0 % - 31.12.2023
0.7268 ex 3506 91 90 60 Temporary wafer-bonding adhesive material in the form of a suspension of a solid polymer in D-limonene (CAS RN 5989-27-5) with a polymeric content by weight of 25 % or more but not more than 35 % 0 % l 31.12.2022
0.7267 ex 3506 91 90 70 Temporary wafer-bonding release in the form of a suspension of a solid polymer in cyclopentanone (CAS RN 120-92-3) with a polymeric content of not more than 10 % by weight 0 % l 31.12.2022
0.6293 ex 3507 90 90 10 Preparation of Achromobacter lyticus protease (CAS RN 123175-82-6) for use in the manufacture of human and analogue insulin products (1) 0 % - 31.12.2024
0.7050 ex 3507 90 90 30 Salicylate 1-monooxygenase (CAS RN 9059-28-3) in aqueous solution with — an enzyme concentration of 6,0 U/ml or more, but not more than 7,4 U/ml , — a concentration by weight of sodium azide (CAS RN 26628-22-8) of not more than 0,09 % and — a pH value of 6,5 or more, but not more than 8,5 0 % - 31.12.2026
0.4922 ex 3601 00 00 10 Pyrotechnical powder in the form of granulate of cylindrical shape, composed of strontium nitrate or copper nitrate in the solution of nitroguanidine, binder and additives, used as a component of airbag inflators (1) 0 % - 31.12.2026
0.7318 ex 3603 50 00 10 Igniters for gas generators with an overall maximum length of 20,34mm or more but not more than 29,4 mm and a pin length of 6,68 mm (± 0,3 mm) or more but not more than 7,54 mm (± 0,3 mm) 0 % - 31.12.2022
0.7338 ex 3707 10 00 60 Sensitising emulsion, containing by weight: — not more than 5 % of photoacid generator, — 2 % or more but not more than 50 % of phenolic resins, and — not more than 7 % of epoxy-containing derivatives, dissolved in heptan-2-one and/or ethyllactate 0 % - 31.12.2022
0.7994 ex 3801 10 00 20 Artificial graphite (CAS RN 7782-42-5) powder form, with: — specific surface area (measured by BET) of 0,8 m2/g (± 0,25), — tap density: 0,85 g/cm3 (± 0,10), — particle size represented by d50 value of 21,0 μm (± 2,0), — specific discharge capacity of 351,0 mAh/g (± 3,0), — initial efficiency of 94,0 % (± 2,0) 1,8 % - 31.12.2022
0.7975 ex 3801 10 00 30 Artificial graphite in powder form, (CAS RN 7782-42-5) with: — with or without coating on the surface, — particle size represented by d50 value of 15 μm (± 4), — specific surface area (measured by BET) less than 3,5 m2/g, — tap density: 1,3 g/m3 (± 0,5), — specific Discharge Capacity of 348 mAh/g (± 13), — initial efficiency above 93,0 % 1,8 % - 31.12.2022
0.5465 ex 3801 90 00 10 Expandable graphite (CAS RN 90387-90-9 and CAS RN 12777-87-6) 0 % - 31.12.2026
0.6759 ex 3802 10 00 10 Mixture of activated carbon and polyethylene, in form of powder 0 % - 31.12.2025
0.7368 ex 3802 10 00 40 Chemically activated carbon for the absorption and desorption of vapors, in a defined or irregular shape with an effective butane capacity of 5 g butane / 100 ml or more (according to ASTM D 5228) (1) 0 % - 31.12.2022
0.2987 3805 90 10 Pine oil 1,7 % - 31.12.2023
0.2990 ex 3808 91 90 10 Indoxacarb (ISO) and its (R) isomer, fixed on a support of silicon dioxide 0 % - 31.12.2023
0.2988 ex 3808 91 90 30 Preparation containing endospores or spores and protein crystals derived from either: — Bacillus thuringiensis Berliner subsp. aizawai and kurstaki or, — Bacillus thuringiensis subsp. kurstaki or, — Bacillus thuringiensis subsp. israelensis or, — Bacillus thuringiensis subsp. aizawai or, — Bacillus thuringiensis subsp. tenebrionis 0 % - 31.12.2024
0.2983 ex 3808 91 90 40 Spinosad (ISO) 0 % - 31.12.2023
0.5710 ex 3808 91 90 60 Spinetoram (ISO) (CAS RN 935545-74-7), preparation of two spinosyn components (3'-ethoxy-5,6-dihydro spinosyn J) and (3'-ethoxy- spinosyn L) 0 % - 31.12.2022
0.6874 ex 3808 92 30 10 Mancozeb (ISO) (CAS RN 8018-01-7) imported in immediate packings of a content of 500 kg or more (2) 0 % - 31.12.2025
0.2986 ex 3808 92 90 10 Fungicide in the form of a powder, containing by weight 65 % or more but not more than 75 % of hymexazole (ISO), not put up for retail sale 0 % - 31.12.2023
0.2984 ex 3808 92 90 30 Preparation consisting of a suspension of pyrithione zinc (INN) in water, containing by weight: — 24 % or more but not more than 26 % of pyrithione zinc (INN), or — 39 % or more but not more than 41 % of pyrithione zinc (INN) 0 % - 31.12.2023
0.4843 ex 3808 92 90 50 Preparations based on copper pyrithione (CAS RN 14915-37-8) 0 % - 31.12.2024
0.4753 ex 3808 93 90 10 Preparation, in the form of granules, containing by weight: — 38,8 % or more but not more than 41,2 % of Gibberellin A3, or — 9,5 % or more but not more than 10,5 % of Gibberellin A4 and A7 0 % - 31.12.2024
0.5048 ex 3808 93 90 20 Preparation consisting of benzyl(purin-6-yl)amine in a glycol solution, containing by weight: — 1,88 % or more but not more than 2,00 % of benzyl(purin-6-yl)amine of a kind used in plant growth regulators 0 % - 31.12.2025
0.5030 ex 3808 93 90 30 Aqueous solution containing by weight: — 1,8 % of sodium para-nitrophenolate, — 1,2 % of sodium ortho-nitrophenolate, — 0,6 % of sodium 5-nitroguaiacolate, for use in the manufacture of a plant growth regulator (1) 0 % - 31.12.2022
0.7413 ex 3808 93 90 60 Preparation in the form of tablets containing by weight: — 0,55 % or more but not more than 2,50 % of 1-methylcyclopropene (1-MCP) (CAS RN 3100-04-7) with a minimum purity of 96 % or more, and — less than 0,05 % of each of the two impurities, 1-chloro-2-methylpropene (CAS RN 513-37-1) and 3-chloro-2-methylpropene (CAS RN 563-47-3) for coating (1) 0 % - 31.12.2022
0.6532 ex 3808 94 20 30 Bromochloro-5,5-dimethylimidazolidine-2,4-dione (CAS RN 32718-18-6) containing: — 1,3-Dichloro-5,5-dimethylimidazolidine-2,4-dione (CAS RN 118-52-5), — 1,3-Dibromo-5,5-dimethylimidazolidine-2,4-dione (CAS RN 77-48-5), — 1-Bromo,3-chloro-5,5-dimethylimidazolidine-2,4-dione (CAS RN 16079-88-2), and/or — 1-Chloro,3-bromo-5,5-dimethylimidazolidine-2,4-dione (CAS RN 126-06-7) 0 % - 31.12.2024
0.6000 ex 3808 99 90 20 Abamectin (ISO) (CAS RN 71751-41-2) 0 % - 31.12.2023
0.2557 ex 3809 91 00 10 Mixture of 5-ethyl-2-methyl-2-oxo-1,3,2λ 5-dioxaphosphoran-5-ylmethyl methyl methylphosphonate and bis(5-ethyl-2-methyl-2-oxo-1,3,2λ 5-dioxaphosphoran-5-ylmethyl) methylphosphonate 0 % - 31.12.2023
0.4406 ex 3810 10 00 10 Soldering or welding paste, consisting of a mixture of metals and resin containing by weight: — 70 % or more, but not more than 90 % of tin — not more than 10 % of one or more metals of silver, copper, bismuth, zinc, or indium for use in the electro technical industry (1) 0 % - 31.12.2023
0.4510 ex 3811 19 00 10 Solution of more than 61 % but not more than 63 % by weight of methylcyclopentadienyl manganese tricarbonyl in an aromatic hydrocarbon solvent, containing by weight not more than: — 4,9 % of 1,2,4-trimethyl-benzene, — 4,9 % of naphthalene, and — 0,5 % of 1,3,5-trimethyl-benzene 0 % - 31.12.2024
0.3448 ex 3811 21 00 10 Salts of dinonylnaphthalenesulphonic acid, in the form of a solution in mineral oils 0 % - 31.12.2023
0.7223 ex 3811 21 00 11 Dispersing agent and oxidation inhibitor containing : — o-amino polyisobutylenephenol (CAS RN 78330-13-9), — more than 30 % by weight but not more than 50 % by weight of mineral oils, used in the manufacture of blends of additives for lubricating oils (1) 0 % - 31.12.2023
0.6904 ex 3811 21 00 12 Dispersing agent containing : — esters of polyisobutenyl succinic acid and pentaerythritol (CAS RN 103650-95-9), — 35 % or more but not more than 55 % by weight of mineral oils, and — with a chlorine content of not more than 0,05 % by weight, used in the manufacture of blends of additives for lubricating oils (1) 0 % - 31.12.2025
0.6018 ex 3811 21 00 13 Additives containing : — borated magnesium (C16-C24) alkylbenzene sulphonates and — mineral oils, having a total base number (TBN) of more than 250, but not more than 350, for use in the manufacture of lubricating oils (1) 0 % - 31.12.2024
0.6906 ex 3811 21 00 14 Dispersing agent : — containing polyisobutene succinimide derived from reaction products of polyethylenepolyamines with polyisobutenyl succinic anhydride (CAS RN 147880-09-9), — containing 35 % or more but not more than 55 % by weight of mineral oils, — with a chlorine content by weight of not more than 0,05 %, — having a total base number of less than 15, used in the manufacture of blends of additives for lubricating oils (1) 0 % - 31.12.2025
0.6907 ex 3811 21 00 16 Detergent containing : — Calcium salt of beta-aminocarbonyl alkylphenol (reaction product Mannich base of alkylphenol) — 40 % or more but not more than 60 % by weight of mineral oils and — having a total base number more than 120 used in the manufacture of blends of additives for lubricating oils (1) 0 % - 31.12.2025
0.6905 ex 3811 21 00 18 Detergent containing : — long chain alkyltoluene calcium sulphonates, — more than 30 % but not more than 50 % by weight of mineral oils, and — having a total base number of more than 310 but not more than 340, used in the manufacture of blends of additives for lubricating oils (1) 0 % - 31.12.2025
0.6430 ex 3811 21 00 19 Additives containing: — a polyisobutylene succinimide based mixture, and — more than 30 % but not more than 50 % by weight of mineral oils, having a total base number of more than 40, for use in the manufacture of lubricating oils (1) 0 % - 31.12.2024
0.3449 ex 3811 21 00 20 Additives for lubricating oils, based on complex organic molybdenum compounds, in the form of a solution in mineral oil 0 % - 31.12.2023
0.8196 ex 3811 21 00 22 Additive consisting essentially of: — Polyisobutenyl succinic anhydride (CAS RN 192662-34-3) reaction product with N,N-diethylaminoethanol (CAS RN 100-37-8), — 25 % or more by weight, but not more than 40 % by weight of mineral oil, used in the manufacture of blends of additives for lubricating oils (1) 0 % - 31.12.2026
0.8197 ex 3811 21 00 24 Additive consisting essentially of: — Polyisobutenyl succinic anhydride reaction product with polyethylenepolyamines, borated (CAS RN 134758-95-5), with a chlorine content by weight of 0,05 % or more but not more than 0,25 % and a total base number (TBN) of more than 20, — 45 % and more by weight and no more than 55 % by weight of mineral oil, used in the manufacture of blends of additives for lubricating oils (1) 0 % - 31.12.2026
0.6012 ex 3811 21 00 25 Additives containing: — a (C8-18) alkyl polymethacrylate copolymer with N-[3-(dimethylamino)propyl]methacrylamide, of an average molecular weight (Mw) of more than 10 000 but not more than 20 000 , and — more than 15 %, but not more than 30 % by weight of mineral oils, for use in the manufacture of lubricating oils (1) 0 % - 31.12.2024
0.8198 ex 3811 21 00 26 Additive consisting essentially of: — Phosphorodithioic acid, mixed O,O-bis (1,3-dimethylbutyl and isopropyl) esters, zinc salts (CAS RN 84605-29-8), — 7 % or more by weight but not more than 12 % by weight of mineral oil, used in the manufacture of blends of additives for lubricating oils (1) 0 % - 31.12.2026
0.6022 ex 3811 21 00 27 Additives containing: — 10 % or more by weight of an ethylene-propylene copolymer chemically modified by succinic anhydride groups reacted with 3-nitroaniline, and — mineral oils, for use in the manufacture of lubricating oils (1) 0 % - 31.12.2024
0.8199 ex 3811 21 00 28 Additive consisting essentially of: — Zinc bis(O,O-bis(2-ethylhexyl)) bis (dithiophosphate) (CAS RN 4259-15-8); — triphenyl phosphite (CAS RN 101-02-0) more than 0,5 % by weight but not more than 6 % by weight, — O,O,O-triphenyl phosphorothioate (CAS RN 597-82-0) more than 0,5 % by weight but not more than 6 % by weight, and not more than 7,5 % by weight of the combination of triphenylphosphorus compounds — 10 % or more by weight but not more than 20 % by weight of mineral oils, used in the manufacture of blends of additives for lubricating oils (1) 0 % - 31.12.2026
0.5717 ex 3811 21 00 30 Additives for lubricating oils, containing mineral oils, consisting of calcium salts of reaction products of polyisobutylene substituted phenol with salicylic acid and formaldehyde, used as a concentrated additive for the manufacture of engine oils through a blending process 0 % - 31.12.2022
0.8200 ex 3811 21 00 31 Additive consisting essentially of: — Phosphorodithioic acid, mixed O,O-bis (isobutyl and pentyl) esters, zinc salts (CAS RN 68457-79-4), — 8 % or more by weight but not more than 15 % by weight of mineral oil, used in the manufacture of blends of additives for lubricating oils (1) 0 % - 31.12.2026
0.8201 ex 3811 21 00 32 Additive consisting essentially of: — Zinc O,O,O',O'-tetrakis (1,3-dimethylbutyl) bis(phosphorodithioate) (CAS RN 2215-35-2), — 4 % or more by weight but not more than 12 % by weight of mineral oil, used in the manufacture of blends of additives for lubricating oils (1) 0 % - 31.12.2026
0.6013 ex 3811 21 00 33 Additives containing: — calcium salts of heptylphenol reaction products with formaldehyde (CAS RN 84605-23-2), and — mineral oils, having a total base number (TBN) of more than 40 but not more than 100, for use in the manufacture of lubricating oils or overbased detergents for use in lubricating oils (1) 0 % - 31.12.2024
0.6016 ex 3811 21 00 37 Additives containing: — a styrene-maleic anhydride copolymer esterified with C4-C20 alcohols, modified by aminopropylmorpholine, and — more than 50 % but not more than 75 % by weight of mineral oils, for use in the manufacture of lubricating oils (1) 0 % - 31.12.2024
0.6435 ex 3811 21 00 48 Additives containing — overbased magnesium (C20-C24) alkylbenzenesulphonates (CAS RN 231297-75-9) and — by weight more than 25 % but not more than 50 % of mineral oils, having a total base number of more than 350, but not more than 450, for use in the manufacture of lubricating oils (1) 0 % - 31.12.2024
0.5727 ex 3811 21 00 50 Additives for lubricating oils, — based on calcium C16-24 alkylbenzenesulphonates (CAS RN 70024-69-0), — containing mineral oils, used as a concentrated additive for the manufacture of engine oils through a blending process 0 % - 31.12.2022
0.6437 ex 3811 21 00 53 Additives containing: — overbased calcium petroleum sulphonates (CAS 68783-96-0) with a sulphonate content by weight of 15 % or more, but not more than 30 % and — by weight more than 40 % but not more than 60 % of mineral oils, having a total base number of 280 or more but not more than 420, for use in the manufacture of lubricating oils (1) 0 % - 31.12.2024
0.6434 ex 3811 21 00 55 Additives containing: — low base number calcium polypropylbenzenesulphonate (CAS RN 75975-85-8) and — by weight more than 40 % but not more than 60 % of mineral oils, having a total base number of more than 10 but not more than 25, for use in the manufacture of lubricating oils (1) 0 % - 31.12.2024
0.5724 ex 3811 21 00 60 Additives for lubricating oils, containing mineral oils, — based on calcium polypropylenyl substituted benzenesulphonate (CAS RN 75975-85-8) with a content by weight of 25 % or more but not more than 35 %, — with a total base number (TBN) of 280 or more but not more than 320, used as a concentrated additive for the manufacture of engine oils through a blending process 0 % - 31.12.2022
0.6431 ex 3811 21 00 63 Additives containing: — an overbased mixture of calcium petroleum sulphonates (CAS RN 61789-86-4) and synthetic calcium alkylbenzenesulphonates (CAS RN 68584-23-6 and CAS RN 70024-69-0) with a total sulphonate content by weight of 15 % or more, but not more than 25 % and — by weight more than 40 % but not more than 60 % of mineral oils, having a total base number of 280 or more but not more than 320, for use in the manufacture of lubricating oils (1) 0 % - 31.12.2024
0.6429 ex 3811 21 00 65 Additives containing: — a polyisobutylene succinimide based mixture (CAS RN 160610-76-4), and — more than 35 % but not more than 50 % by weight of mineral oils, having a sulphur content of more than 0,7 % but not more than 1,3 % by weight, having a total base number of more than 8, for use in the manufacture of lubricating oils (1) 0 % - 31.12.2024
0.5711 ex 3811 21 00 70 Additives for lubricating oils, — containing polyisobutylene succinimide derived from reaction products of polyethylenepolyamines with polyisobutenyl succinic anhydride (CAS RN 84605-20-9), — containing mineral oils, — with a chlorine content by weight of 0,05 % or more but not more than 0,25 %, — with a total base number (TBN) of more than 20, used as a concentrated additive for the manufacture of engine oils through a blending process 0 % - 31.12.2022
0.6017 ex 3811 21 00 73 Additives containing: — borated succinimide compounds (CAS RN 134758-95-5), — mineral oils, and — having a total base number (TBN) greater than 40, for use in the manufacture of additive mixtures for lubricating oils (1) 0 % - 31.12.2023
0.6671 ex 3811 21 00 75 Additives containing: — Calcium (C10-C14) dialkylbenzenesulfonates, — more than 40 %, but not more than 60 % by weight of mineral oils, with a total base number of not more than 10, for use in the manufacture of blends of additives for lubricating oils (1) 0 % - 31.12.2022
0.6669 ex 3811 21 00 77 Antifoam additives consisting of: — a copolymer of 2-ethylhexyl acrylate and ethyl acrylate, and — more than 50 % but not more than 80 % by weight of mineral oils, for use in the manufacture of additive blends for lubricating oils (1) 0 % - 31.12.2022
0.6666 ex 3811 21 00 80 Additives containing : — polyisobutylene aromatic polyamine succinimide, — more than 40 % but not more than 60 % by weight of mineral oils, with a nitrogen content of more than 0,6 % but not more than 0,9 % by weight, for use in the manufacture of additive blends for lubricating oils (1) 0 % - 31.12.2022
0.6498 ex 3811 21 00 83 Additives containing: — polyisobutene succinimide derived from reaction of polyethylenepolyamines with polyisobutenyl succinic anhydride (CAS RN 84605-20-9), — more than 31,9 % but not more than 43,3 % by weight of mineral oils, — not more than 0,05 % by weight chlorine, and — having a total base number (TBN) greater than 20, for use in the manufacture of additives blends for lubricating oils (1) 0 % - 31.12.2024
0.5718 ex 3811 21 00 85 Additives: — containing more than 20 % but not more than 45 % by weight of mineral oils, — based on a mixture of branched dodecylphenol sulfide calcium salts, whether or not carbonated, for use in the manufacture of blends of additives (1) 0 % - 31.12.2022
0.6438 ex 3811 29 00 15 Additives containing : — products from the reaction of branched heptyl phenol with formaldehyde, carbon disulphide and hydrazine (CAS RN 93925-00-9) and — more than15 % but not more than 28 % by weight of light aromatic petroleum naphtha solvent, for use in the manufacture of lubricating oils (1) 0 % - 31.12.2024
0.7512 ex 3811 29 00 18 Additive consisting of dihydroxy butanedioic acid - (mixed C12-16-alkyl and C13-rich C11-14-isoalkyl) diester, for use in the manufacture of engine oils (1) 0 % - 31.12.2023
0.5721 ex 3811 29 00 20 Additives for lubricating oils, consisting of reaction products of bis(2-methylpentan-2-yl)dithiophosphoric acid with propylene oxide, phosphorus oxide, and amines with C12-14 alkyl chains, used as a concentrated additive for the manufacture of lubricating oils 0 % - 31.12.2022
0.6432 ex 3811 29 00 25 Additives containing at least salts of primary amines and mono- and di-alkylphosphoric acids, for use in the manufacture of lubricating oils or greases (1) 0 % - 31.12.2024
0.5723 ex 3811 29 00 30 Additives for lubricating oils, consisting of reaction products of butyl-cyclohex-3-enecarboxylate, sulphur and triphenyl phosphite (CAS RN 93925-37-2), used as a concentrated additive for the manufacture of engine oils through a blending process 0 % - 31.12.2022
0.6433 ex 3811 29 00 35 Additives consisting of an imidazoline based mixture (CAS RN 68784-17-8), for use in the manufacture of lubricating oils (1) 0 % - 31.12.2024
0.5728 ex 3811 29 00 40 Additives for lubricating oils, consisting of reaction products of 2-methyl-prop-1-ene with sulphur monochloride and sodium sulphide (CAS RN 68511-50-2), with a chlorine content by weight of 0,01 % or more but not more than 0,5 %, used as a concentrated additive for the manufacture of lubricating oils 0 % - 31.12.2022
0.6436 ex 3811 29 00 45 Additives consisting of a mixture of (C7-C9) dialkyl adipates, in which diisooctyl adipate (CAS RN 1330-86-5) is more than 85 % by weight of the mixture, for use in the manufacture of lubricating oils (1) 0 % - 31.12.2024
0.5719 ex 3811 29 00 50 Additives for lubricating oils, consisting of a mixture of N,N-dialkyl -2-hydroxyacetamides with alkyl chain lengths between 12 and 18 carbon atoms (CAS RN 866259-61-2), used as a concentrated additive for the manufacture of engine oils through a blending process 0 % - 31.12.2022
0.6668 ex 3811 29 00 65 Additives consisting of a sulphurised mixture of vegetable oil, long chain α-olefins and tall oil fatty acids, with a sulphur content of 8 % or more but not more than 12 % by weight, for use in the manufacture of blends of additives for lubricating oils (1) 0 % - 31.12.2022
0.6020 ex 3811 29 00 70 Additives consisting of dialkylphosphites (in which the alkyl groups contain more than 80 % by weight of oleyl, palmityl and stearyl groups), for use in the manufacture of lubricating oils (1) 0 % - 31.12.2024
0.7205 ex 3811 29 00 75 Oxidation inhibitor mainly containing a mixture of isomers of 1-(tert-dodecylthio)propan-2-ol (CAS RN 67124-09-8), used in the manufacture of blends of additives for lubricating oils (1) 0 % (1) - 31.12.2023
0.6021 ex 3811 29 00 80 Additives containing : — more than 70 % by weight of 2,5-bis(tert-nonyldithio)-[1,3,4]-thiadiazole (CAS RN 89347-09-1), and — more than 15 % by weight of 5-(tert-nonyldithio)- 1,3,4-thiadiazole-2(3H)-thione (CAS RN 97503-12-3), for use in the manufacture of lubricating oils (1) 0 % - 31.12.2024
0.6023 ex 3811 29 00 85 Additives consisting of a mixture of 3-((C9-11)-isoalkyloxy)tetrahydrothiophene 1,1-dioxide, C10-rich (CAS RN 398141-87-2), for use in the manufacture of lubricating oils (1) 0 % - 31.12.2024
0.3730 ex 3811 90 00 10 Dinonylnaphthylsulphonic acid salt, in a mineral oil solution 0 % - 31.12.2023
0.5565 ex 3811 90 00 40 Solution of a quaternary ammonium salt based on polyisobutenyl succinimide, containing by weight 10 % or more but not more than 29,9 % of 2-ethylhexanol 0 % - 31.12.2022
0.7204 ex 3811 90 00 50 Corrosion inhibitor containing : — polyisobutenyl succinic acid and — more than 5 % and not more than 20 % by weight of mineral oils for use in the manufacture of blends of additives for fuels (1) 0 % - 31.12.2026
0.5147 ex 3812 10 00 10 Rubber accelerator based on diphenyl guanidine granules (CAS RN 102-06-7) 0 % - 31.12.2026
0.6045 ex 3812 20 90 10 Plasticiser, containing: — bis(2-ethylhexyl)-1,4-benzene dicarboxylate (CAS RN 6422-86-2) — more than 10 % but not more than 60 % by weight of dibutylterephthalate (CAS RN 1962-75-0) 0 % - 31.12.2023
0.3444 ex 3812 39 90 20 Mixture containing predominantly bis(2,2,6,6-tetramethyl-1-octyloxy-4-piperidyl) sebacate 0 % - 31.12.2023
0.6055 ex 3812 39 90 25 UV photo stabiliser containing: — α-[3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]-ω-hydroxypoly(oxy-1,2-ethanediyl) (CAS RN 104810-48-2); — α-[3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]-ω-[3-[3-(2H-benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropoxy]poly (oxy-1,2-ethanediyl) (CAS RN 104810-47-1); — polyethylene glycol of a weight average molecular weight (Mw) of 300 (CAS RN 25322-68-3) — bis (1,2,2,6,6-pentamethyl-4-piperidyl)sebacate (CAS RN 41556-26-7), and — methyl-1,2,2,6,6-pentamethyl-4- piperidyl sebacate (CAS RN 82919-37-7) 0 % - 31.12.2023
0.3446 ex 3812 39 90 30 Compound stabilisers containing by weight 15 % or more but not more than 40 % of sodium perchlorate and not more than 70 % of 2-(2-methoxyethoxy)ethanol 0 % - 31.12.2024
0.6054 ex 3812 39 90 35 Mixture containing by weight: — 25 % or more but not more than 55 % of a mixture of C15-18 tetramethylpiperidinyl esters (CAS RN 86403-32-9) — not more than 20 % of other organic compounds — on a carrier of polypropylene (CAS RN 9003-07-0) or amorphous silica (CAS RN 7631-86-9 or 112926-00-8) 0 % - 31.12.2023
0.4861 ex 3812 39 90 40 Mixture of: — 80 % (± 10 %) by weight of 2-ethylhexyl 10-ethyl-4,4-dimethyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate (CAS RN 57583-35-4), and — 20 % (± 10 %) by weight of 2-ethylhexyl 10-ethyl-4-[[2-[(2-ethylhexyl)oxy]-2-oxoethyl]thio]-4-methyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate (CAS RN 57583-34-3) 0 % - 31.12.2023
0.8273 ex 3812 39 90 45 2-Aminoethanol reaction products with cyclohexane and peroxidized N-butyl-2,2,6,6-tetramethyl-4-piperidinamine-2,4,6-trichloro-1,3,5-triazine reaction products (CAS RN 191743-75-6) with a purity by weight of 99 % or more 0 % - 31.12.2026
0.5477 ex 3812 39 90 55 UV-stabilizer, containing: — 2-(4,6-bis(2,4-dimethylphenyl)-1,3,5-triazin-2-yl)-5-(octyloxy)-phenol (CAS RN 2725-22-6) and — either N,N'-bis(1,2,2,6,6-pentamethyl-4-piperidinyl)-1,6-hexanediamine, polymer with 2,4- dichloro-6-(4-morpholinyl)-1,3,5-triazine (CAS RN 193098-40-7) or — N,N'-bis(2,2,6,6-tetramethyl-4-piperidinyl)-1,6-hexanediamine, polymer with 2,4- dichloro-6-(4-morpholinyl)-1,3,5-triazine (CAS RN 82451-48-7) 0 % - 31.12.2026
0.5483 ex 3812 39 90 65 Stabiliser for plastic material containing: — 2-ethylhexyl 10-ethyl-4,4-dimethyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate (CAS RN 57583-35-4), — 2-ethylhexyl 10-ethyl-4-[[2-[(2-ethylhexyl)oxy]-2-oxoethyl]thio]-4-methyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate (CAS RN 57583-34-3), and — 2-ethylhexyl mercaptoacetate (CAS RN 7659-86-1) 0 % - 31.12.2026
0.5372 ex 3812 39 90 70 Light stabiliser containing: — branched and linear alkyl esters of 3-(2H-benzotriazolyl)-5-(1,1-dimethylethyl)-4-hydroxybenzenepropanoic acid (CAS RN 127519-17-9), and — 1-methoxy-2-propyl acetate (CAS RN 108-65-6) 0 % - 31.12.2022
0.5822 ex 3812 39 90 80 UV-stabilizer, consisting of: — a hindered amine: N,N'-bis(1,2,2,6,6-pentamethyl-4-piperidinyl)-1,6-hexanediamine, polymer with 2,4-dichloro-6-(4-morpholinyl)-1,3,5-triazine (CAS RN 193098-40-7) and — either an o-hydroxyphenyl triazine UV light absorber or — a chemically modified phenolic compound 0 % - 31.12.2022
0.3441 ex 3814 00 90 20 Mixture containing by weight: — 69 % or more but not more than 71 % of 1-methoxypropan-2-ol (CAS RN 107-98-2), — 29 % or more but not more than 31 % of 2-methoxy-1-methylethyl acetate (CAS RN 108-65-6) 0 % - 31.12.2023
0.3731 ex 3814 00 90 40 Azeotrope mixtures containing isomers of nonafluorobutyl methyl ether and/or nonafluorobutyl ethyl ether 0 % - 31.12.2023
0.2800 ex 3815 12 00 10 Catalyst, in the form of granules or rings of a diameter of 3 mm or more but not more than 10 mm, consisting of silver on an aluminium oxide support and containing by weight 8 % or more but not more than 40 % of silver 0 % - 31.12.2023
0.7574 ex 3815 12 00 20 Spherical catalyst consisting of a support of aluminium oxide coated with platinum, with — a diameter of 1,4 mm or more but not more than 2,0 mm, and — a platinum content by weight of 0,2 % or more but not more than 0,5 % 0 % - 31.12.2023
0.7585 ex 3815 12 00 30 Catalyst — containing 0,3 gram per litre or more, but not more than 7 gram per litre of precious metals, — deposited on a ceramic honeycomb structure coated with aluminium oxide or cerium/zirconium oxide, the honeycomb structure having: — a nickel content of 1,26 % by weight or more, but not more than 1,29 % by weight, — 62 cells per cm2 or more, but not more than 140 cells per cm2 , — a diameter of 100 mm or more, but not more than 120 mm, and — a length of 60 mm or more, but not more than 150 mm, for use in the production of motor vehicles (1) 0 % - 31.12.2023
0.5508 ex 3815 19 90 10 Catalysts consisting of chromium trioxide, dichromium trioxide or organometallic compounds of chromium, fixed on a silicon dioxide support with a pore volume of 2 cm3/g or more (as determined by the nitrogen absorption method) 0 % - 31.12.2026
0.2799 ex 3815 19 90 15 Catalyst, in the form of a powder, consisting of a mixture of metal oxides fixed on a support of silicon dioxide, containing by weight 20 % or more but not more than 40 % of molybdenum, bismuth and iron evaluated together, for use in the manufacture of acrylonitrileh (1) 0 % - 31.12.2023
0.2798 ex 3815 19 90 20 Catalyst, — in the form of solid spheres, — of a diameter of 4 mm or more but not more than 12 mm, and — consisting of a mixture of molybdenum oxide and other metal oxides, supported on silicon dioxide and/or aluminium oxide, for use in the manufacture of acrylic acid (1) 0 % - 31.12.2023
0.6049 ex 3815 19 90 25 Catalyst in the form of spheres of a diameter of 4,2 mm or more but not more than 9 mm, consisting of a mixture of metal oxides containing predominantly oxides of molybdenum, nickel, cobalt and iron, on a support of aluminium oxide, for use in the manufacture of acrylic aldehyde (1) 0 % - 31.12.2023
0.3435 ex 3815 19 90 30 Catalyst containing titanium tetrachloride supported on magnesium dichloride, for use in the manufacture of polypropylene (1) 0 % - 31.12.2023
0.7566 ex 3815 19 90 35 Catalyst consisting of tungstosilicic acid hydrate (CAS RN 12027-43-9) impregnated on a support of silicon dioxide in the form of a powder 0 % - 31.12.2023
0.2792 ex 3815 19 90 65 Catalyst consisting of phosphoric acid chemically bonded to a support of silicon dioxide 0 % - 31.12.2023
0.2791 ex 3815 19 90 70 Catalyst consisting of organo-metallic compounds of aluminium and zirconium, fixed on a support of silicon dioxide 0 % - 31.12.2023
0.2790 ex 3815 19 90 75 Catalyst consisting of organo-metallic compounds of aluminium and chromium, fixed on a support of silicon dioxide 0 % - 31.12.2023
0.2793 ex 3815 19 90 80 Catalyst consisting of organo-metallic compounds of magnesium and titanium, fixed on a support of silicon dioxide, in the form of a suspension in mineral oil 0 % - 31.12.2023
0.2788 ex 3815 19 90 85 Catalyst consisting of organo-metallic compounds of aluminium, magnesium and titanium, fixed on a support of silicon dioxide, in the form of powder 0 % - 31.12.2023
0.3899 ex 3815 19 90 86 Catalyst containing titanium tetrachloride supported on magnesium dichloride, for use in the manufacture of polyolefins (1) 0 % - 31.12.2023
0.4005 ex 3815 90 90 16 Initiator based on dimethylaminopropyl urea 0 % - 31.12.2022
0.5704 ex 3815 90 90 18 Oxidation catalyst with an active ingredient of di[manganese (1+)], 1,2-bis(octahydro-4,7-dimethyl-1H-1,4,7-triazonine-1-yl-kN1, kN4, kN7)ethane-di-μ-oxo-μ-(ethanoato-kO, kO')-, di[chloride(1-)] (CAS RN 1217890-37-3), used to accelerate chemical oxidation or bleaching 0 % - 31.12.2022
0.7528 ex 3815 90 90 25 Catalyst consisting by weight of: — 30 % or more but not more than 33 % of bis(4-(diphenylsulphonio)phenyl)sulphide bis(hexafluorophosphate) (CAS RN 74227-35-3), and — 24 % or more but not more than 27 % of diphenyl(4-phenylthio)phenylsuphonium hexafluorophosphate (CAS RN 68156-13-8) in propylene carbonate (CAS RN 108-32-7) 0 % - 31.12.2023
0.5062 ex 3815 90 90 30 Catalyst, consisting of a suspension in mineral oil of: — tetrahydrofuran complexes of magnesium chloride and titanium(III) chloride, and — silicon dioxide, — containing 6,6 % (± 0,6 %) by weight of magnesium, and — containing 2,3 % (± 0,2 %) by weight of titanium 0 % - 31.12.2025
0.7526 ex 3815 90 90 35 Catalyst containing by weight: — 25 % or more but not more than 27,5 % of bis[4-(diphenylsuphonio)phenyl]sulphide bis(hexafluoroantimonate) (CAS RN 89452-37-9), and — 20 % or more but not more than 22,5 % of diphenyl(4-phenylthio)phenylsufonium hexafluoroantimonate (CAS RN 71449-78-0) in propylene carbonate (CAS RN 108-32-7) 0 % - 31.12.2023
0.7998 ex 3815 90 90 38 Photoinitiator, containing by weight: — 80 % or more of polyethylene glycol di[β-4-[4-(2-dimethylamino-2-benzyl)butanoylphenyl]piperazine]propionate (CAS RN 886463-10-1), — not more than 17 % of polyethylene glycol [β-4-[4-(2-dimethylamino-2-benzyl)butanoylphenyl]piperazine]propionate 0 % - 31.12.2025
0.6006 ex 3815 90 90 40 Catalyst: — containing molybdenum oxide and other metal oxides in a silicon dioxide matrix, — in the form of hollow cylindrical solids of a length of 4 mm or more but not more than 12 mm for use in the manufacture of acrylic acid (1) 0 % - 31.12.2023
0.7243 ex 3815 90 90 43 Catalyst in powder form consisting by weight of — 92,50 % (± 2) % titanium dioxide (CAS RN 13463-67-7), — 5 % (± 1) % silicon dioxide (CAS RN 112926-00-8), and — 2,5 % (± 1,5) % sulphur trioxide (CAS RN 7446-11-9) 0 % - 31.12.2022
0.7999 ex 3815 90 90 48 Photoinitiator containing by weight: — 88 % or more of α-(2-benzoylbenzoyl)-ω-[(2-benzoylbenzoyl)oxy]-poly(oxy-1,2-ethanediyl) (CAS RN 1246194-73-9), — not more than 12 % of α-(2-benzoylbenzoyl)-ω-hydroxy-poly(oxy-1,2-ethanediyl) (CAS RN 1648797-60-7) 0 % - 31.12.2025
0.3433 ex 3815 90 90 50 Catalyst containing titanium trichloride, in the form of a suspension in hexane or heptane containing by weight, in the hexane- or heptane-free material, 9 % or more but not more than 30 % of titanium 0 % - 31.12.2023
0.2783 ex 3815 90 90 80 Catalyst consisting predominantly of dinonylnaphthalenedisulphonic acid in the form of a solution in isobutanol 0 % - 31.12.2025
0.3430 ex 3815 90 90 81 Catalyst, containing by weight 69 % or more but not more than 79 % of (2-hydroxy-1-methylethyl)trimethylammonium 2-ethylhexanoate 0 % - 31.12.2023
0.2782 ex 3815 90 90 85 Catalyst based on aluminosilicate (zeolite), for the alkylation of aromatic hydrocarbons, for the transalkylation of alkylaromatic hydrocarbons or for the oligomerization of olefins (1) 0 % - 31.12.2022
0.2909 ex 3815 90 90 86 Catalyst, in the form of rodlets, consisting of an aluminosilicate (zeolite), containing by weight 2 % or more but not more than 3 % of rare-earth metal oxides and less than 1 % of disodium oxide 0 % - 31.12.2023
0.3732 ex 3815 90 90 88 Catalyst, consisting of titanium tetrachloride and magnesium chloride, containing by weight on an oil- and hexane-free basis: — 4 % or more but not more than 10 % of titanium and — 10 % or more but not more than 20 % magnesium 0 % - 31.12.2023
0.3733 ex 3815 90 90 89 Rhodococcus rhodocrous J1 bacteria, containing enzymes, suspended in a polyacrylamide gel or in water, for use as a catalyst in the production of acrylamide by the hydration of acrylonitrile (1) 0 % - 31.12.2026
0.4408 ex 3817 00 50 10 Mixture of alkylbenzenes (C14-26) containing by weight: — 35 % or more but not more than 60 % of eicosylbenzene, — 25 % or more but not more than 50 % of docosylbenzene, — 5 % or more but not more than 25 % of tetracosylbenzene 0 % - 31.12.2023
0.3427 ex 3817 00 80 10 Mixture of alkylnaphthalenes, containing by weight: — 88 % or more but not more than 98 % of hexadecylnaphthalene — 2 % or more but not more than 12 % of dihexadecylnaphthalene 0 % - 31.12.2023
0.4581 ex 3817 00 80 20 Mixture of branched alkyl benzenes mainly containing dodecyl benzenes 0 % - 31.12.2023
0.5479 ex 3817 00 80 30 Mixed alkylnaphthalenes, modified with aliphatic chains, of a chain-length varying from 12 to 56 carbon atoms 0 % - 31.12.2026
0.4006 ex 3819 00 00 20 Fire resistant hydraulic fluid based on phosphate ester 0 % - 31.12.2023
0.7922 ex 3823 19 10 20 12-Hydroxyoctadecanoic acid (CAS RN 106-14-9) for use in the manufacture of polyglycerin-poly-12-hydroxyoctadecanoic acid esters (1) 0 % - 31.12.2024
0.6038 ex 3823 19 30 ex 3823 19 30 20 30 Palm fatty acid distillate, whether or not hydrogenated, with free fatty acid content 80 % or more for use in the manufacture of: — industrial monocarboxylic fatty acids of heading 3823 , — stearic acid of heading 3823 , — stearic acid of heading 2915 , — palmitic acid of heading 2915 , or — animal feed preparations of heading 2309  (1) 0 % - 31.12.2023
0.6037 ex 3823 19 90 ex 3823 19 90 20 30 Palm acid oils from refining for use in the manufacture of: — industrial monocarboxylic fatty acids of heading 3823 , — stearic acid of heading 3823 , — stearic acid of heading 2915 , — palmitic acid of heading 2915 , or — animal feed preparations of heading 2309  (1) 0 % - 31.12.2023
0.2908 ex 3824 99 15 10 Acid aluminosilicate (artificial zeolite of the Y type) in the sodium form, containing by weight not more than 11 % of sodium evaluated as sodium oxide, in the form of rodlets 0 % - 31.12.2023
0.6810 ex 3824 99 92 23 Butylphosphato complexes of titanium(IV) (CAS RN 109037-78-7), dissolved in ethanol and propan-2-ol 0 % - 31.12.2025
0.7321 ex 3824 99 92 26 Preparation containing by weight: — 60 % or more but not more than 75 % of Solvent naphtha (petroleum), heavy aromatic (CAS RN 64742-94-5) — 15 % or more but not more than 25 % of 4-(4-nitrophenylazo)-2,6-di-sec-butyl-phenol (CAS RN 111850-24-9), and — 10 % or more but not more than 15 % of 2-sec-butylphenol (CAS RN 89-72-5) 0 % - 31.12.2022
0.4909 ex 3824 99 92 29 Preparation containing by weight: — 85 % or more but not more than 99 % of polyethylene glycol ether of butyl 2-cyano 3-(4-hydroxy-3-methoxyphenyl) acrylate, and — 1 % or more but not more than 15 % of polyoxyethylene (20) sorbitan trioleate 0 % - 31.12.2025
0.7618 ex 3824 99 92 31 Liquid crystal mixtures for use in the manufacture of LCD (liquid crystal display) modules (1) 0 % - 31.12.2023
0.4707 ex 3824 99 92 32 Mixture of divinylbenzene-isomers and ethylvinylbenzene-isomers, containing by weight 56 % or more but not more than 85 % of divinylbenzene (CAS RN 1321-74-0) 0 % - 31.12.2024
0.3083 ex 3824 99 92 ex 3824 99 93 ex 3824 99 96 33 40 40 Anti-corrosion preparations consisting of salts of dinonylnaphthalenesulphonic acid, either: — on a support of mineral wax, whether or not modified chemically, or — in the form of a solution in an organic solvent 0 % - 31.12.2023
0.4153 ex 3824 99 92 35 Preparations containing not less than 92 % or more but not more than 96,5 % by weight of 1,3:2,4-bis-O-(4-methylbenzylidene)-D-glucitol and also containing carboxylic acid derivatives and an alkyl sulphate 0 % - 31.12.2023
0.4523 ex 3824 99 92 37 Mixture of acetates of 3-butene-1,2-diol with a content by weight of 65 % or more of 3-butene-1,2-diol diacetate (CAS RN 18085-02-4) 0 % - 31.12.2023
0.7722 ex 3824 99 92 38 Reaction products of phosphoryl trichloride and 2-methyloxirane (CAS RN 1244733-77-4) 0 % - 31.12.2024
0.4152 ex 3824 99 92 39 Preparation containing not less than 47 % by weight of 1,3:2,4-bis-O-benzylidene-D-glucitol 0 % - 31.12.2023
0.6779 ex 3824 99 92 40 Solution of 2-chloro-5-(chloromethyl)-pyridine (CAS RN 70258-18-3) in organic diluent 0 % - 31.12.2025
0.6091 ex 3824 99 92 42 Preparation of tetrahydro-α-(1-naphthylmethyl)furan-2-propionic acid (CAS RN 25379-26-4) in toluene 0 % - 31.12.2023
0.7724 ex 3824 99 92 43 Preparation containing by weight: — 65 % or more, but not more than 95 % of isopropylated triaryl phosphate (CAS RN 68937-41-7) and — 5 % or more, but not more than 35 % of triphenyl phosphate (CAS RN 115-86-6) 0 % - 31.12.2024
0.3067 ex 3824 99 92 45 Preparation consisting predominantly of γ-butyrolactone and quaternary ammonium salts, for the manufacture of electrolytic capacitors (1) 0 % - 31.12.2023
0.5475 ex 3824 99 92 47 Preparation, containing: — trioctylphosphine oxide (CAS RN 78-50-2), — dioctylhexylphosphine oxide (CAS RN 31160-66-4), — octyldihexylphosphine oxide (CAS RN 31160-64-2) and — trihexylphosphine oxide (CAS RN 3084-48-8) 0 % - 31.12.2022
0.4279 ex 3824 99 92 49 Preparation based on 2,5,8,11-tetramethyl-6-dodecyn-5,8-diol ethoxylate (CAS RN 169117-72-0) 0 % - 31.12.2022
0.4292 ex 3824 99 92 50 Alkyl carbonate-based preparation, also containing a UV absorber, for use in the manufacture of spectacle lenses (1) 0 % - 31.12.2022
0.3065 ex 3824 99 92 51 Mixture containing by weight 40 % or more but not more than 50 % of 2-hydroxyethyl methacrylate and 40 % or more but not more than 50 % of glycerol ester of boric acid 0 % - 31.12.2023
0.7742 ex 3824 99 92 52 Electrolyte containing: — 5 % or more but not more than 20 % lithium hexafluorophosphate (CAS RN 21324-40-3) or lithium tetrafluoroborate (CAS RN 14283-07-9), — 60 % or more but not more than 90 % of a mixture of ethylene carbonate (CAS RN 96-49-1), dimethyl carbonate (CAS RN 616-38-6) and/or ethyl methyl carbonate (CAS RN 623-53-0), — 0,5 % or more but not more than 20 % 1,3,2-dioxathiolane 2,2-dioxide (CAS RN 1072-53-3), for use in the manufacture of motor vehicle batteries (1) 3,2 % - 31.12.2022
0.3061 ex 3824 99 92 53 Preparations consisting predominantly of ethylene glycol and: — either diethylene glycol, dodecanedioic acid and ammonia water, — or N,N-dimethylformamide, — or γ-butyrolactone, — or silicon oxide, — or ammonium hydrogen azelate, — or ammonium hydrogen azelate and silicon oxide, — or dodecanedioic acid, ammonia water and silicon oxide, for the manufacture of electrolytic capacitors (1) 0 % - 31.12.2023
0.4434 ex 3824 99 92 54 Poly(tetramethylene glycol) bis[(9-oxo-9H-thioxanthen-1-yloxy)acetate] with an average polymer chain length of less than 5 monomer units (CAS RN 813452-37-8) 0 % - 31.12.2026
0.6025 ex 3824 99 92 55 Additives for paints and coatings, containing: — a mixture of esters of phosphoric acid obtained from the reaction of phosphoric anhydride with 4-(1,1-dimethylpropyl) phenol and copolymers of styrene-allyl alcohol (CAS RN 84605-27-6), and — 30 % or more but not more than 35 % by weight of isobutyl alcohol 0 % - 31.12.2023
0.4431 ex 3824 99 92 56 Poly(tetramethylene glycol) bis[(2-benzoyl-phenoxy)acetate] with an average polymer chain length of less than 5 monomer units 0 % - 31.12.2024
0.4425 ex 3824 99 92 57 Poly(ethylene glycol) bis(p-dimethyl)aminobenzoate with an average polymer chain length of less than 5 monomer units 0 % - 31.12.2024
0.6067 ex 3824 99 92 59 Potassium tert-butanolate (CAS RN 865-47-4) in the form of a solution in tetrahydrofuran 0 % - 31.12.2023
0.5050 ex 3824 99 92 61 3',4',5'-Trifluorobiphenyl-2-amine, in the form of a solution in toluene containing by weight 80 % or more but not more than 90 % of 3',4',5'-trifluorobiphenyl-2-amine 0 % - 31.12.2025
0.7831 ex 3824 99 92 62 Solution of 9-borabicyclo[3.3.1]nonane (CAS RN 280-64-8) in tetrahydrofurane (CAS RN 109-99-9), containing by weight 6 % or more 9-borabicyclo[3.3.1]nonane 0 % - 31.12.2024
0.3122 ex 3824 99 92 65 Mixture of primary tert-alkylamines 0 % - 31.12.2024
0.6720 ex 3824 99 92 68 Preparation containing by weight: — 20 % (±1 %) ((3-(sec-butyl)-4-(decyloxy)phenyl)methanetriyl) Tribenzene (CAS RN 1404190-37-9) Dissolved in: — 10 % (± 5 %) 2-sec-Butylphenol (CAS RN 89-72-5) — 64 %( ±7 %) Solvent naphtha (petroleum), heavy aromatic (CAS RN 64742-94-5) and — 6 % (± 1,0 %) Naphthalene (CAS RN 91-20-3) 0 % - 31.12.2025
0.6719 ex 3824 99 92 69 Preparation containing by weight: — 80 % or more but not more than 92 % of Bisphenol-A bis(diphenyl phosphate) (CAS RN 5945-33-5) — 7 % or more but not more than 20 % oligomers of Bisphenol-A bis(diphenyl phosphate) and — not more than 1 % triphenyl phosphate (CAS RN 115-86-6) 0 % - 31.12.2026
0.4409 ex 3824 99 92 70 Mixture of 80 % (± 10 %) of 1-[2-(2-aminobutoxy)ethoxy]but-2-ylamine and 20 % (± 10 %) of 1-({[2-(2-aminobutoxy)ethoxy]methyl} propoxy)but-2-ylamine 0 % - 31.12.2024
0.6198 ex 3824 99 92 72 N-(2-Phenylethyl)-1,3-benzenedimethanamine derivatives (CAS RN 404362-22-7) 0 % - 31.12.2023
0.6114 ex 3824 99 92 76 Preparation containing: — 74 % or more but not more than 90 % by weight of (S)-α-hydroxy-3-phenoxy-benzeneacetonitrile (CAS RN 61826-76-4) and — 10 % or more but not more than 26 % by weight of toluene (CAS RN 108-88-3) 0 % - 31.12.2023
0.5834 ex 3824 99 92 80 Diethylene glycol propylene glycol triethanolamine titanate complexes (CAS RN 68784-48-5) dissolved in diethylene glycol (CAS RN 111-46-6) 0 % - 31.12.2022
0.6546 ex 3824 99 92 82 T-butylchloride dimethylsilane (CAS RN 18162-48-6) solution in toluene 0 % - 31.12.2024
0.3074 ex 3824 99 92 84 Preparation consisting by weight of 83 % or more of 3a,4,7,7a-tetrahydro-4,7-methanoindene (dicyclopentadiene), a synthetic rubber, whether or not containing by weight 7 % or more of tricyclopentadiene, and: — either an aluminium-alkyl compound, — or an organic complex of tungsten — or an organic complex of molybdenum 0 % - 31.12.2023
0.3069 ex 3824 99 92 88 2,4,7,9-Tetramethyldec-5-yne-4,7-diol, hydroxyethylated (CAS RN 9014-85-1) 0 % - 31.12.2025
0.8083 ex 3824 99 92 92 Solution consisting of: — 50 (± 2) % by weight sodium mentholate (CAS RN 19321-38-1), and — 50 (± 2) % by weight light aliphatic solvent naphtha (petroleum) (CAS RN 64742-89-8) 0 % - 31.12.2025
0.8121 ex 3824 99 92 93 Solution of not more than 15 % by weight of lithium hexafluorophosphate (CAS RN 21324-40-3) in a mixture of ethylene carbonate (CAS RN 96-49-1), dimethyl carbonate (CAS RN 616-38-6) and ethyl methyl carbonate (CAS RN 623-53-0), contains organic carbonate derivatives as additives 3,2 % - 31.12.2022
0.8278 ex 3824 99 92 94 ({[2-(trifluoromethyl)phenyl]carbonyl}amino)methyl acetate (CAS RN 895525-72-1) with a content of at least 45 % by weight dissolved in N,N-dimethylacetamide (CAS RN 127-19-5) 0 % - 31.12.2026
0.8287 ex 3824 99 92 95 Solution of methyl cis-1-{[(2,5-dimethylphenyl)acetyl]amino}-4-methoxycyclohexanecarboxylate (CAS RN 203313-47-7) in N,N-dimethylacetamide (CAS RN 127-19-5), containing by weight 25 % or more but not more than 45 % of the carboxylate 0 % - 31.12.2026
0.5961 ex 3824 99 93 30 Powder Mixture containing by weight: — 85 % or more of zinc diacrylate (CAS RN 14643-87-9), — not more than 5 % of 2,6-di-tert-butyl-alpha-dimethylamino-p-cresol (CAS RN 88-27-7), and — not more than 10 % of zinc stearate (CAS RN 557-05-1) 0 % - 31.12.2024
0.4719 ex 3824 99 93 35 Paraffin with a level of chlorination of 70 % or more (CAS RN 63449-39-8) 0 % - 31.12.2024
0.7379 ex 3824 99 93 38 Mixture of 4,4'-(perfluoroisopropylidene)diphenol (CAS RN 1478-61-1) and 4,4'-(perfluoroisopropylidene)diphenol benzyl triphenyl phosphonium salt (CAS RN 75768-65-9) 0 % - 31.12.2022
0.4527 ex 3824 99 93 42 Mixture of bis{4-(3-(3-phenoxycarbonylamino)tolyl)ureido}phenylsulphone, diphenyltoluene-2,4-dicarbamate and 1-[4-(4-aminobenzenesulphonyl)-phenyl]-3-(3-phenoxycarbonylamino-tolyl)-urea 0 % - 31.12.2023
0.7153 ex 3824 99 93 45 Sodium hydrogen 3-aminonaphthalene-1,5-disulphonate (CAS RN 4681-22-5) containing by weight: — not more than 20 % of disodium sulphate, and — not more than 10 % of sodium chloride 0 % - 31.12.2026
0.7786 ex 3824 99 93 48 Nonhalogenated flame retardant containing by weight: — 50 % or more, but not more than 65 % of piperazine pyrophosphate (CAS RN 66034-17-1), — 35 % or more, but not more than 45 % of a phosphoric acid derivative and — not more than 6 % of zinc oxide (CAS RN 1314-13-2) 0 % - 31.12.2024
0.8062 ex 3824 99 93 51 Tris(hydroxymethyl)phosphine oxide (CAS RN 1067-12-5) with a purity by weight of 85 % or more 0 % - 31.12.2025
0.6215 ex 3824 99 93 53 Zinc dimethacrylate (CAS RN 13189-00-9), containing not more than 2,5 % by weight of 2,6-di-tert-butyl-alpha-dimethyl amino-p-cresol (CAS RN 88-27-7), in the form of powder 0 % - 31.12.2023
0.7497 ex 3824 99 93 60 Mixture of phytosterols (CAS RN 949109-75-5) in powder form containing by weight: — 40 % or more but not more than 88 % of sitosterols, — 20 % or more but not more than 63 % of campesterols, — 14 % or more but not more than 38 % of stigmasterols, — not more than 13 % brassicasterols, and — not more than 5 % sitostanols 0 % - 31.12.2023
0.4290 ex 3824 99 93 63 Mixture of phytosterols, not in the form of powder, containing by weight: — 75 % or more of sterols, — not more than 25 % of stanols, for use in the manufacture of stanols/sterols or stanol/sterol esters (1) 0 % - 31.12.2022
0.7460 ex 3824 99 93 65 Reaction mass of 1,1'-(isopropylidene)bis[3,5-dibromo-4-(2,3-dibromo-2-methylpropoxy)benzene] (CAS RN 97416-84-7) and 1,3-dibromo-2-(2,3-dibromo-2-methylpropoxy)-5-{2-[3,5-dibromo-4-(2,3,3-tribromo-2-methylpropoxy)phenyl]propan-2-yl}benzene 0 % - 31.12.2023
0.3117 ex 3824 99 93 70 Oligomeric reaction product, consisting of bis(4-hydroxyphenyl) sulfone and 1,1'-oxybis(2-chloroethane) 0 % - 31.12.2024
0.3112 ex 3824 99 93 75 Mixture of phytosterols, in the form of flakes and balls, containing by weight 80 % or more of sterols and not more than 4 % of stanols 0 % - 31.12.2024
0.5817 ex 3824 99 93 ex 3824 99 96 83 85 Preparation containing: — C,C'-azodi(formamide) (CAS RN 123-77-3), — magnesium oxide (CAS RN 1309-48-4) and — zinc bis(p-toluene sulphinate) (CAS RN 24345-02-6) in which the gas formation from C,C'-azodi(formamide) occurs at 135 °C 0 % - 31.12.2023
0.3049 ex 3824 99 93 ex 3824 99 96 85 57 Particles of silicon dioxide on which are covalently bonded organic compounds, for use in the manufacture of high performance liquid chromatography columns (HPLC) and sample preparation cartridges (1) 0 % - 31.12.2023
0.4336 ex 3824 99 93 88 Mixture of phytosterols containing by weight: — 60 % or more, but not more than 80 % of sitosterols, — less than 15 % of campesterols, — less than 5 % of stigmasterols, and — less than 15 % of betasitostanols 0 % - 31.12.2022
0.7420 ex 3824 99 96 30 Rare-earth concentrate containing by weight: — 20 % or more but not more than 30 % of cerium oxide (CAS RN 1306-38-3), — 2 % or more but not more than 10 % of lanthanum oxide (CAS RN 1312-81-8), — 10 % or more but not more than 15 % of yttrium oxide (CAS RN 1314-36-9), and — not more than 65 % of zirconium oxide (CAS RN 1314-23-4) including natural occurring hafnium oxide 0 % - 31.12.2022
0.7611 ex 3824 99 96 33 Buffer cartridge not exceeding 8 000 ml containing: — 0,05 % or more but not more than 0,1 % by weight of 5-Chloro-2-methyl-2,3-dihydroisothiazol-3-one (CAS RN 55965-84-9) and — 0,05 % or more but not more that 0,1 % by weight of 2-Methyl-2,3-dihydroisothiazol-3-one (CAS RN 2682-20-4) as a biostatic 0 % - 31.12.2023
0.3078 ex 3824 99 96 35 Calcined bauxite (refractory grade) 0 % - 31.12.2023
0.4542 ex 3824 99 96 37 Structured silica alumina phosphate 0 % - 31.12.2024
0.7313 ex 3824 99 96 45 Lithium nickel cobalt aluminium oxide powder (CAS RN 177997-13-6) with: — a particle size of less than 10 μm, — a purity by weight of more than 98 % 3,2 % - 31.12.2022
0.6628 ex 3824 99 96 46 Manganese zinc ferrite granulate, containing by weight: — 52 % or more but not more than 76 % of iron(III)oxide, — 13 % or more but not more than 42 % of manganese oxide, and — 2 % or more but not more than 22 % of zinc oxide 0 % - 31.12.2025
0.3064 ex 3824 99 96 47 Mixed metals oxides, in the form of powder, containing by weight: — either 5 % or more of barium, neodymium or magnesium and 15 % or more of titanium, — or 30 % or more of lead and 5 % or more of niobium, for use in the manufacture of dielectric films or for use as dielectric materials in the manufacture of multilayer ceramic capacitors (1) 0 % - 31.12.2023
0.6749 ex 3824 99 96 48 Zirconium oxide (ZrO2), calcium oxide stabilised (CAS RN 68937-53-1) with a zirconium oxide content by weight of 92 % or more but not more than 97 % 0 % - 31.12.2025
0.5607 ex 3824 99 96 50 Nickel hydroxide, doped with 12 % or more but not more than 18 % by weight of zinc hydroxide and cobalt hydroxide, of a kind used to produce positive electrodes for accumulators 0 % - 31.12.2022
0.6145 ex 3824 99 96 55 Carrier in powder form, consisting of: — ferrite (Iron oxide) (CAS RN 1309-37-1) — manganese oxide (CAS RN 1344-43-0) — magnesium oxide (CAS RN 1309-48-4) — styrene acrylate copolymer to be mixed with the toner powder, in the manufacturing of ink/toner filled bottles or cartridges for facsimile machines, computer printers and copiers (1) 0 % - 31.12.2023
0.5141 ex 3824 99 96 60 Fused magnesia containing by weight 15 % or more of dichromium trioxide 0 % - 31.12.2026
0.3050 ex 3824 99 96 65 Aluminium sodium silicate, in the form of spheres of a diameter of: — either 1,6 mm or more but not more than 3,4 mm, — or 4 mm or more but not more than 6 mm 0 % - 31.12.2023
0.8122 ex 3824 99 96 68 Lithium nickel dioxide (CAS RN 12325-84-7) containing by weight: — less than 5 % of lithium hydroxide (CAS RN 1310-65-2), — less than 5 % of lithium carbonate (CAS RN 554-13-2), and — less than 15 % of nickel oxide (CAS RN 11099-02-8) 3,2 % - 31.12.2022
0.3119 ex 3824 99 96 73 Reaction product, containing by weight: — 1 % or more but not more than 40 % of molybdenum oxide, — 10 % or more but not more than 50 % of nickel oxide, — 30 % or more but not more than 70 % of tungsten oxide 0 % - 31.12.2024
0.7010 ex 3824 99 96 74 Mixture with a non-stoichiometric composition: — with a crystalline structure, — with a content of fused magnesia-alumina spinel and with admixtures of silicate phases and aluminates, at least 75 % by weight of which consists of fractions with a grain size of 1-3 mm and at most 25 % consists of fractions with a grain size of 0-1 mm 0 % - 31.12.2026
0.7147 ex 3824 99 96 80 Mixture consisting of: — 64 % or more, but not more than 74 % by weight of amorphous silica (CAS RN 7631-86-9) — 25 % or more, but not more than 35 % by weight of butanone (CAS RN 78-93-3) and — not more than 1 % by weight of 3-(2,3-epoxypropoxy)propyltrimethoxysilane (CAS RN 2530-83-8) 0 % - 31.12.2026
0.7553 ex 3824 99 96 83 Cubic Boron nitride (CAS RN 10043-11-5) coated with nickel and/or nickelphosphide (CAS RN 12035-64-2) 0 % - 31.12.2023
0.5820 ex 3824 99 96 87 Platinum oxide (CAS RN 12035-82-4) fixed on a porous support of aluminium oxide (CAS RN 1344-28-1), containing by weight: — 0,1 % or more but not more than 1 % of platinum, and — 0,5 % or more but not more than 5 % of ethylaluminium dichloride (CAS RN 563-43-9) 0 % - 31.12.2022
0.5939 ex 3826 00 10 ex 3826 00 10 20 29 Mixture of fatty acid methyl esters containing by weight at least: — 65 % or more but not more than 75 % of C12 FAME, — 21 % or more but not more than 28 % of C14 FAME, — 4 % or more but not more than 8 % of C16 FAME, for use in the manufacture of detergents and home and personal care products (1) 0 % - 31.12.2023
0.5941 ex 3826 00 10 ex 3826 00 10 50 59 Mixture of fatty acid methyl esters containing by weight at least: — 50 % or more but not more than 58 % of C8-FAME — 35 % or more but not more than 50 % of C10-FAME for the manufacturing of high purity C8 or C10 fatty acid or fatty acid mixtures thereof or of high purity methylester of C8 or C10 fatty acid (1) 0 % - 31.12.2023
0.7756 ex 3827 68 00 05 Mixture of halogenated derivatives containing by weight: — 30 % or more but not more than 60 % of difluoromethane (CAS RN 75-10-5), — 30 % or more but not more than 60 % of trifluoroiodomethane (CAS RN 2314-97-8), — 10 % or more but not more than 30 % of pentafluoroethane (CAS RN 354-33-6) 0 % - 31.12.2024
0.6132 ex 3901 10 10 ex 3901 40 00 20 10 High flow linear low density polyethylene-1-butene / LLDPE (CAS RN 25087-34-7) in form of powder, with — a melt flow rate (MFR 190 °C/2,16 kg) of 16g/10min or more, but not more than 24 g/10 min and — a density (ASTM D 1505 ) of 0,922 g/cm3 or more, but not more than 0,926 g/cm3 and — a vicat softening temperature of min. 94 °C 0 % m3 31.12.2024
0.5142 ex 3901 10 90 30 Polyethylene granules, containing by weight 10 % or more but not more than 25 % of copper 0 % - 31.12.2026
0.6897 ex 3901 40 00 30 Octene linear low-density polyethylene (LLDPE) produced by a Ziegler-Natta catalyst method in the form of pellets with: — more than 10 % but not more than 20 % by weight of copolymer, — a melt flow rate (MFR 190 °C/2,16 kg) of 0,7 g/10 min or more but not more than 0,9 g/10 min, and — a density (ASTM D4703) of 0,911 g/cm3 or more, but not more than 0,913 g/cm3, for use in the co-extrusion processing of films for flexible food packaging (1) 0 % m3 31.12.2025
0.6920 ex 3901 90 80 53 Copolymer of ethylene and acrylic acid (CAS RN 9010-77-9) with: — an acrylic acid content of 18,5 % or more, but not more than 49,5 % by weight (ASTM D4094), and — a melt flow rate of 10g/10 min or more (125°C/2,16 kg, ASTM D1238) 0 % m3 31.12.2025
0.6734 ex 3901 90 80 55 Zinc or sodium salt of an ethylene and acrylic acid copolymer, with: — an acrylic acid content of 6 % or more but not more than 50 % by weight, and — a melt flow rate of 1g/10 min or more at 190 °C/2,16 kg (measured using ASTM D1238) 0 % - 31.12.2025
0.5049 ex 3901 90 80 67 Copolymer made exclusively from ethylene and methacrylic acid monomers in which the methacrylic acid content is 11 % by weight or more 0 % - 31.12.2025
0.6998 ex 3901 90 80 73 Mixture containing by weight — 80 % or more, but not more than 94 % of chlorinated polyethylene (CAS RN 64754-90-1) and — 6 % or more, but not more than 20 % of styrene-acrylic copolymer (CAS RN 27136-15-8) 0 % - 31.12.2026
0.2902 ex 3901 90 80 91 Ionomer resin consisting of a salt of a copolymer of ethylene with methacrylic acid 0 % - 31.12.2023
0.3906 ex 3901 90 80 92 Chlorosulphonated polyethylene 0 % - 31.12.2023
0.2899 ex 3901 90 80 93 Copolymer of ethylene, vinyl acetate and carbon monoxide, for use as a plasticiser in the manufacture of roof sheets (1) 0 % - 31.12.2023
0.3186 ex 3901 90 80 94 Mixtures of A-B block copolymer of polystyrene and ethylene-butylene copolymer and A-B-A block copolymer of polystyrene, ethylene-butylene copolymer and polystyrene, containing by weight not more than 35 % of styrene 0 % - 31.12.2023
0.2898 ex 3901 90 80 97 Chlorinated polyethylene, in the form of powder 0 % - 31.12.2023
0.2895 ex 3902 10 00 20 Polypropylene, containing no plasticiser, — of a melting point of more than 150 °C (as determined by the ASTM D 3417 method), — of a heat of fusion of 15 J/g or more but not more than 70 J/g, — of an elongation at break of 1 000  % or more (as determined by the ASTM D 638 method), — of a tensile modulus of 69 MPa or more but not more than 379 MPa (as determined by the ASTM D 638 method) 0 % - 31.12.2023
0.4591 ex 3902 10 00 40 Polypropylene, containing no plasticiser: — of a tensile strength: of 32-77 MPa (as determined by the ASTM D638 method); — of a flexural strength of 50-105 MPa (as determined by the ASTM D790 method); — of a Melt Flow Rate (MFR) at 230 °C/ 2,16 kg of 5-15 g/10 min (as determined by the ASTM D 1238 method); — with 40 % or more but not more than 80 % by weight of polypropylene, — with 10 % or more but not more than 30 % by weight of glass fibre, — with 10 % or more but not more than 30 % by weight of mica 0 % - 31.12.2024
0.3180 ex 3902 20 00 10 Polyisobutylene, of a number average molecular weight (Mn) of 700 or more but not more than 800 0 % - 31.12.2023
0.3179 ex 3902 20 00 20 Hydrogenated polyisobutene, in liquid form 0 % - 31.12.2023
0.8125 ex 3902 30 00 20 Hydrogenated block copolymer of styrene and isoprene (CAS RN 68648-89-5), containing by weight less than 37 % of styrene 0 % - 31.12.2025
0.8232 ex 3902 30 00 30 Hydrogenated copolymer of styrene, isoprene and butadiene, containing by weight 28 % or more, but not more than 55 % of propylene 0 % - 31.12.2026
0.3181 ex 3902 30 00 91 A-B Block copolymer of polystyrene and an ethylene-propylene copolymer, containing by weight 40 % or less of styrene, in one of the forms mentioned in note 6 (b) to Chapter 39 0 % - 31.12.2023
0.5143 ex 3902 30 00 95 A-B-A block copolymer, consisting of: — a copolymer of propylene and ethylene and — 21 % (± 3 %) by weight of polystyrene 0 % - 31.12.2026
0.5138 ex 3902 30 00 97 Liquid ethylene-propylene-copolymer with: — a flashpoint of 250 °C or more, — a viscosity index of 150 or more, — of a number average molecular weight (Mn) of 650 or more 0 % - 31.12.2026
0.4424 ex 3902 90 90 52 Amorphous poly-alpha-olefin copolymer blend of poly(propylene-co-1-butene) and petroleum hydrocarbon resin 0 % - 31.12.2023
0.4509 ex 3902 90 90 55 Thermoplastic elastomer, with an A-B-A block copolymer structure of polystyrene, polyisobutylene and polystyrene containing by weight 10 % or more but not more than 35 % of polystyrene 0 % - 31.12.2023
0.4768 ex 3902 90 90 60 Non-hydrogenated 100 % aliphatic resin (polymer), with the following characteristics: — liquid at room temperature — obtained by cationic polymerisation of C-5 alkenes monomers — with a number average molecular weight (Mn) of 370 (± 50) — with a weight average molecular weight (Mw) of 500 (± 100) 0 % - 31.12.2024
0.7950 ex 3902 90 90 65 Brominated butadiene-styrene copolymer (CAS RN 1195978-93-8) with a bromine content of 60 % by weight or more but not more than 68 %, in forms as defined in Note 6 (b) to Chapter 39 0 % - 31.12.2025
0.4040 ex 3902 90 90 70 Synthetic poly-alpha-olefin with a viscosity of 3 or more but not more than 9 centistokes (measured at 100 ° Celsius according to the ASTM D 445 method), obtained by polymerization of dodecene with or without: — not more than 40 % by weight of tetradecene and/or — not more than 2 % by weight decene and/or — not more than 2 % by weight of hexadecene 0 % - 31.12.2026
0.6422 ex 3902 90 90 ex 3911 90 99 75 28 Polycarboxylate sodium salt of 2,5-furandione and 2,4,4-trimethylpentene in powder form 0 % - 31.12.2024
0.2900 ex 3902 90 90 92 Polymers of 4-methylpent-1-ene 0 % - 31.12.2023
0.6214 ex 3902 90 90 94 Chlorinated polyolefins, whether or not in a solution or dispersion 0 % - 31.12.2023
0.4166 ex 3903 19 00 40 Crystalline polystyrene with: — a melting point of 268 °C or more but not more than 272 °C — a setting point of 232 °C or more but not more than 247 °C, — whether or not containing additives and filling material 0 % - 31.12.2026
0.5175 ex 3903 90 90 15 Copolymer in the form of granules containing by weight: — 78 (± 4 %) of styrene, — 9 (± 2 %) of n-butyl acrylate, — 11 (± 3 %) of n-butyl methacrylate,, — 1,5 (± 0,7 %) of methacrylic acid and — 0,01 % or more but not more than 2,5 % of polyolefinic wax 0 % - 31.12.2023
0.5176 ex 3903 90 90 20 Copolymer in the form of granules containing by weight: — 83 ± 3 % styrene, — 7 ± 2 % n-butyl acrylate, — 9 ± 2 % n-butyl methacrylate and — 0,01 % or more but not more than 1 % of polyolefinic wax 0 % - 31.12.2026
0.7861 ex 3903 90 90 33 Copolymer of styrene, divinylbenzene and chloromethylstyrene (CAS RN 55844-94-5) with a purity by weight of 99 % or more 0 % - 31.12.2024
0.2891 ex 3903 90 90 ex 3911 90 99 35 43 Copolymer of α-methylstyrene and styrene, having a softening point of more than 113 oC 0 % - 31.12.2023
0.7417 ex 3903 90 90 ex 3904 69 80 38 88 Polytetrafluoroethylene (CAS RN 9002-84-0) encapsulated with an acrylonitrile-styrene copolymer (CAS RN 9003-54-7), with a content by weight of each polymer of 50 % (± 1 %) 0 % - 31.12.2022
0.6565 ex 3903 90 90 45 Preparation, in form of powder, containing by weight: — 86 % or more but not more than 90 % of styrene-acrylic-copolymer and — 9 % or more but not more than 11 % of fatty acid ethoxylate (CAS RN 9004-81-3) 0 % m3 31.12.2024
0.5473 ex 3903 90 90 ex 3911 90 99 60 60 Copolymer of styrene with maleic anhydride, either partially esterified or completely chemically modified, of an average molecular weight (Mn) of not more than 4 500, in flake or powder form 0 % - 31.12.2026
0.6736 ex 3903 90 90 65 Copolymer of styrene with 2, 5-furandione and (1-methylethyl)benzene in the form of flakes or powder (CAS RN 26762-29-8) 0 % - 31.12.2025
0.6804 ex 3903 90 90 70 Copolymer in the form of granules containing by weight: — 75 % (± 7 %) styrene and — 25 % (± 7 %) methylmethacrylate 0 % m3 31.12.2025
0.3910 ex 3903 90 90 80 Granules of copolymer of styrene and divinylbenzene of a minimum diameter of 150 μm and a maximum diameter of 800 μm and containing by weight: — minimum 65 % styrene, — maximum 25 % divinylbenzene for use in the manufacture of ion exchange resins (1) 0 % - 31.12.2023
0.4410 ex 3903 90 90 86 Mixture containing by weight: — 45 % or more but not more than 65 % of polymers of styrene — 35 % or more but not more than 45 % of poly(phenylene ether) — not more than 10 % of other additives and with one or more of the following special colour effects: — metallic or pearlescent with a visual angular metamerism caused by at least 0,3 % flake-based pigment — fluorescent, as characterized by emitting light during absorption of ultraviolet radiation — bright white, as characterized by L not less than 92 and b not more than 2 and a* between -5 and 7 on the CIELab colour scale 0 % - 31.12.2023
0.2887 ex 3904 30 00 ex 3904 40 00 30 91 Copolymer of vinyl chloride with vinyl acetate and vinyl alcohol, containing by weight: — 87 % or more but not more than 92 % of vinyl chloride, — 2 % or more but not more than 9 % of vinyl acetate and — 1 % or more but not more than 8 % of vinyl alcohol, in one of the forms mentioned in note 6 (a) or (b) to Chapter 39, for the manufacture of goods of headings 3215 or 8523 or for use in the manufacture of coatings for containers and closures of a kind used for preserving food and drink (1) 0 % - 31.12.2023
0.2885 ex 3904 61 00 20 Copolymer of tetrafluoroethylene and trifluoro(heptafluoropropoxy)ethylene, containing 3,2 % or more but not more than 4,6 % by weight of trifluoro(heptafluoropropoxy)ethylene and less than 1 mg/kg of extractable fluoride ions 0 % - 31.12.2023
0.7675 ex 3904 69 80 20 Copolymer of tetrafluoroethylene, heptafluoro-1-pentene and ethene (CAS RN 94228-79-2) 0 % - 31.12.2023
0.7626 ex 3904 69 80 30 Copolymer of tetrafluoroethylene, hexafluoropropene and ethene 0 % - 31.12.2023
0.4981 ex 3904 69 80 81 Poly(vinylidene fluoride) (CAS RN 24937-79-9) 0 % - 31.12.2025
0.5560 ex 3904 69 80 85 Copolymer of ethylene and chlorotrifluoroethylene, whether or not modified with hexafluoroisobutylene, whether or not containing fillers 0 % - 31.12.2022
0.3285 ex 3904 69 80 94 Copolymer of ethylene and tetrafluoroethylene 0 % - 31.12.2023
0.2883 ex 3904 69 80 96 Polychlorotrifluoroethylene, in one of the forms mentioned in note 6 (a) and (b) to Chapter 39 0 % - 31.12.2023
0.3745 ex 3904 69 80 97 Copolymer of chlorotrifluoroethylene and vinylidene difluoride 0 % - 31.12.2024
0.5786 ex 3905 30 00 10 Viscous preparation, essentially consisting of poly(vinyl alcohol) (CAS RN 9002-89-5), an organic solvent and water for use as protective coating of wafers during the manufacturing of semiconductors (1) 0 % - 31.12.2022
0.5774 ex 3905 91 00 40 Water soluble copolymer of ethylene and vinyl alcohol (CAS RN 26221-27-2), containing by weight not more than 38 % of the monomer unit ethylene 0 % - 31.12.2022
0.8126 ex 3905 91 00 50 Aqueous solution consisting by weight of: — 10 % or more but not more than 20 % of a copolymer of vinyl pyrrolidone, N,N-dimethylaminopropyl methacrylamide and 3 (methacryloylamino)propyllauryldimethylammonium chloride (CAS RN 306769-73-3), — not more than 1 % preservatives 0 % - 31.12.2025
0.8145 ex 3905 91 00 60 Copolymer of vinylpyrrolidone, vinyl caprolactam and dimethylaminoethyl methacrylate (CAS RN 102972-64-5) in solid form, or as an aqueous solution containing by weight: — 27 % or more but not more than 33 % of copolymer, — not more than 1,5 % of ethanol (CAS RN 64-17-5), — not more than 1 % of preservatives 0 % - 31.12.2025
0.8138 ex 3905 91 00 70 Aqueous solution, containing by weight: — 25 % or more but not more than 35 % of a copolymer of vinyl caprolactam, vinyl pyrrolidone, N,N-dimethylaminopropyl methacrylamide and 3-(methacryloylamino)propyllauryldimethylammonium chloride (CAS RN 748809-45-2), — 10 % or more but not more than 16 % of ethanol (CAS RN 64-17-5) whether or not denatured with tert-butyl alcohol (CAS RN 75-65-0) and/or denatonium benzoate (CAS RN 3734-33-6) 0 % - 31.12.2025
0.8139 ex 3905 91 00 80 Copolymer of vinylpyrrolidone, acrylic acid and dodecyl methacrylate (CAS RN 83120-95-0) 0 % - 31.12.2025
0.3283 ex 3905 99 90 95 Hexadecylated or eicosylated polyvinylpyrrolidone 0 % - 31.12.2023
0.2880 ex 3905 99 90 96 Polymer of vinyl formal, in one of the forms mentioned in note 6 (b) to Chapter 39, of a weight average molecular weight (Mw) of 25 000 or more but not more than 150 000 and containing by weight: — 9,5 % or more but not more than 13 % of acetyl groups evaluated as vinyl acetate and — 5 % or more but not more than 6,5 % of hydroxy groups evaluated as vinyl alcohol 0 % - 31.12.2023
0.3282 ex 3905 99 90 97 Povidone (INN)-iodine (CAS RN 25655-41-8) 0 % - 31.12.2023
0.3278 ex 3905 99 90 98 Poly(vinyl pyrrolidone) partially substituted by triacontyl groups, containing by weight 78 % or more but not more than 82 % of triacontyl groups 0 % - 31.12.2023
0.3276 3906 90 60 Copolymer of methyl acrylate with ethylene and a monomer containing a non-terminal carboxy group as a substituent, containing by weight 50 % or more of methyl acrylate, whether or not mixed with silicon dioxide 0 % - 31.12.2023
0.3279 ex 3906 90 90 10 Polymerization product of acrylic acid with small quantities of a polyunsaturated monomer, for the manufacture of medicaments of heading 3003 or 3004  (1) 0 % - 31.12.2023
0.7347 ex 3906 90 90 23 Copolymer of methylmethacrylate, butylacrylate, glycidylmethacrylate and styrene (CAS RN 37953-21-2), with an epoxy equivalent weight of not more than 500, in form of ground flakes with a particle size of not more than 1 cm 0 % - 31.12.2022
0.5814 ex 3906 90 90 27 Copolymer of stearyl methacrylate, isooctyl acrylate and acrylic acid, dissolved in isopropyl palmitate 0 % - 31.12.2022
0.6672 ex 3906 90 90 33 Core shell copolymer of butyl acrylate and alkyl methacrylate, with a particle size of 5 μm or more but not more than 10 μm 0 % - 31.12.2025
0.6663 ex 3906 90 90 37 Copolymer of trimethylolpropane trimethacrylate and methyl methacrylate (CAS RN 28931-67-1), in microsphere form with an average diameter of 3 μm 0 % - 31.12.2025
0.4667 ex 3906 90 90 41 Poly(alkyl acrylate) with an ester alkyl chain of C10 to C30 0 % - 31.12.2024
0.7125 ex 3906 90 90 43 Copolymer of methacrylic esters, butylacrylate and cyclic dimethylsiloxanes (CAS RN 143106-82-5) 0 % - 31.12.2026
0.2886 ex 3906 90 90 50 Polymers of esters of acrylic acid with one or more of the following monomers in the chain: — chloromethyl vinyl ether, — chloroethyl vinyl ether, — chloromethylstyrene, — vinyl chloroacetate, — methacrylic acid, — butenedioic acid monobutyl ester, — butenedioic acid monocyclohexyl ester, containing by weight not more than 5 % of each monomer unit 0 % - 31.12.2023
0.7499 ex 3906 90 90 60 Aqueous dispersion containing by weight: — more than 10 % but not more than 15 % of ethanol, and — more than 7 % but not more than 11 % of a reaction product of poly(epoxyalkylmethacrylate-co-divinylbenzene) with a glycerol derivative 0 % - 31.12.2023
0.6425 ex 3906 90 90 73 Preparation containing by weight: — 33 % or more but not more than 37 % of butyl methacrylate - methacrylic acid copolymer, — 24 % or more but not more than 28 % of propylene glycol, and — 37 % or more but not more than 41 % of water 0 % - 31.12.2024
0.6891 ex 3907 10 00 20 Polyoxymethylene with acetyl endcaps, containing polydimethylsiloxane and fibers of a copolymer of terephthalic acid and 1,4-phenyldiamine 0 % - 31.12.2022
0.3272 ex 3907 29 11 10 Poly(ethylene oxide) of a number average molecular weight (Mn) of 100 000 or more 0 % - 31.12.2023
0.4378 ex 3907 29 11 20 Bis[Methoxypoly[ethyleneglycol)]-maleimidopropionamide, chemically modified with lysine, of a number average molecular weight (Mn) of 40 000 0 % - 31.12.2023
0.5379 ex 3907 29 11 60 Preparation containing: — α-[3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]-ω-hydroxypoly(oxy-1,2-ethanediyl) (CAS RN 104810-48-2) and — α-[3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]-ω-[3-[3-(2H-benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropoxy]poly(oxy-1,2-ethanediyl) (CAS RN 104810-47-1) 0 % - 31.12.2022
0.5862 ex 3907 29 20 20 Polytetramethylene ether glycol with a weight average molecular weight (Mw) of 2 700 or more but not more than 3 100 (CAS RN 25190-06-1) 0 % - 31.12.2022
0.7099 ex 3907 29 20 25 Copolymer of propylene oxide and butylene oxide, monododecylether, containing by weight: — 48 % or more but not more than 52 % of propylene oxide and — 48 % or more but not more than 52 % of butylene oxide 0 % - 31.12.2023
0.2876 ex 3907 29 20 30 Mixture, containing by weight 70 % or more but not more than 80 % of a polymer of glycerol and 1,2-epoxypropane and 20 % or more but not more than 30 % of a copolymer of dibutyl maleate and N-vinyl-2-pyrrolidone 0 % - 31.12.2023
0.7532 ex 3907 29 20 35 Mixture containing by weight: — 5 % or more but not more than 15 % of a copolymer of glycerol, propylene oxide and ethylene oxide (CAS RN 9082-00-2), and — 85 % or more but not more than 95 % of a copolymer of sucrose, propylene oxide and ethylene oxide (CAS RN 26301-10-0) 0 % - 31.12.2023
0.4013 ex 3907 29 20 40 Copolymer of tetrahydrofuran and tetrahydro-3-methylfuran with a number average molecular weight (Mn) of 900 or more but not more than 3 600 0 % - 31.12.2023
0.6351 ex 3907 29 20 50 Poly(p-phenylene oxide) in the form of powder — with a glasstransitiontemperature of 210 °C, — with a weight average molecular weight (Mw) of 35 000 or more but not more than 80 000 , — with an inherent viscosity of 0,2 or more but not more than 0,6 dl/gram 0 % - 31.12.2024
0.7308 ex 3907 29 20 60 Polypropylene glycol monobutyl ether (CAS RN 9003-13-8) of an alkalinity of not more than 1 ppm of sodium 0 % - 31.12.2022
0.3271 ex 3907 29 99 15 Poly(oxypropylene) having alkoxysilyl end-groups 0 % - 31.12.2023
0.7478 ex 3907 29 99 20 2,3-Bis(methylpolyoxyethylene-oxy)-1-[(3-maleimido-1-oxopropyl)amino]propyloxy propane (CAS RN 697278-30-1) with a number average molecular weight (Mn) of at least 20 kDa whether or not modified with a chemical entity enabling a linkage between the PEG and a protein or a peptide 0 % - 31.12.2023
0.2920 ex 3907 29 99 30 Homopolymer of 1-chloro-2,3-epoxypropane (epichlorohydrin) 0 % - 31.12.2023
0.7484 ex 3907 29 99 40 N-(methoxypoly (ethylene glycol) -N-(1-acetyl- (2-methoxypoly (ethylene glycol)) -glycine (CAS RN 600169-00-4) with a number average molecular weight (Mn) for polyethylene glycol of 40 kDa 0 % - 31.12.2023
0.3269 ex 3907 29 99 45 Copolymer of ethylene oxide and propylene oxide, having aminopropyl and methoxy end-groups 0 % - 31.12.2023
0.4536 ex 3907 29 99 50 Vinyl-silyl terminated perfluoropolyether polymer or an assortment of two components consisting of the same type of vinyl-silyl terminated perfluoropolyether polymer as the main ingredient 0 % - 31.12.2023
0.4546 ex 3907 29 99 55 Succinimidyl ester of methoxy poly(ethylene glycol)propionic acid, of a number average molecular weight (Mn) of 5 000 0 % - 31.12.2023
0.5144 ex 3907 29 99 60 Polytetramethylene oxide di-p-aminobenzoate 0 % - 31.12.2026
0.6839 ex 3907 30 00 15 Epoxide resin, halogen-free, — containing by weight more than 2 % phosphoros calculated on the solid content, chemically bound in the epoxide resin, — not containing any hydrolysable chloride or containing less than 300 ppm hydrolysable chloride, and — containing solvents, for use in the manufacture of prepreg sheets or rolls of a kind used for the production of printed circuits (1) 0 % - 31.12.2025
0.6840 ex 3907 30 00 25 Epoxide resin — containing by weight 21 % or more of brome, — not containing any hydrolysable chloride or containing less than 500 ppm hydrolysable chloride, and — containing solvents 0 % - 31.12.2025
0.2759 ex 3907 30 00 40 Epoxide resin, containing by weight 70 % or more of silicon dioxide, for the encapsulation of goods of headings 8504 , 8533 , 8535 , 8536 , 8541 , 8542 or 8548  (1) 0 % - 31.12.2023
0.5578 ex 3907 30 00 60 Polyglycerol polyglycidyl ether resin (CAS RN 118549-88-5) 0 % - 31.12.2022
0.7427 ex 3907 30 00 70 Preparation of epoxy resin (CAS RN 29690-82-2) and phenolic resin (CAS RN 9003-35-4) containing by weight: — 65 % or more but not more than 75 % of silicon dioxide (CAS RN 60676-86-0), and — none or not more than 0,5 % of carbon black (CAS RN 1333-86-4) 0 % - 31.12.2022
0.2541 ex 3907 40 00 35 α-Phenoxycarbonyl-ω-phenoxypoly[oxy(2,6-dibromo-1,4-phenylene) isopropylidene(3,5-dibromo-1,4-phenylene)oxycarbonyl] (CAS RN 94334-64-2) 0 % - 31.12.2023
0.2564 ex 3907 40 00 45 α-(2,4,6-Tribromophenyl)-ω-(2,4,6-tribromophenoxy)poly[oxy(2,6-dibromo-1,4-phenylene)isopropylidene(3,5-dibromo-1,4-phenylene)oxycarbonyl] (CAS RN 71342-77-3) 0 % - 31.12.2023
0.6352 ex 3907 40 00 70 Polycarbonate of phosgene and bisphenol A: — containing by weight 12 % or more but not more than 26 % of a copolymer of isophthaloyl chloride, terephthaloyl chloride and resorcinol, — with p-cumylphenol endcaps, and — with a weight average molecular weight (Mw) of 29 900 or more but not more than 31 900 0 % - 31.12.2024
0.6355 ex 3907 40 00 80 Polycarbonate of carbonic dichloride, 4,4'-(1-methylethylidene)bis[2,6-dibromophenol] and 4,4'-(1-methylethylidene)bis[phenol] with 4-(1-methyl-1-phenylethyl)phenol endcaps 0 % - 31.12.2024
0.3263 ex 3907 69 00 10 Copolymer of terephthalic acid and isophthalic acid with ethylene glycol, butane-1,4-diol and hexane-1,6-diol 0 % - 31.12.2023
0.2980 3907 70 00 Poly(lactic acid) 0 % - 31.12.2023
0.2918 ex 3907 91 90 10 Diallyl phthalate prepolymer, in powder form 0 % - 31.12.2024
0.2977 ex 3907 99 80 10 Poly(oxy-1,4-phenylenecarbonyl) (CAS RN 26099-71-8), in the form of powder 0 % - 31.12.2023
0.5639 ex 3907 99 80 25 Copolymer, containing 72 % by weight or more of terephthalic acid and/or isomers thereof and cyclohexanedimethanol 0 % - 31.12.2022
0.4940 ex 3907 99 80 ex 3913 90 00 30 20 Poly(hydroxyalkanoate), predominantly consisting of poly(3-hydroxybutyrate) 0 % - 31.12.2025
0.7491 ex 3907 99 80 35 Copolymer in form of a clear, pale yellow liquid, consisting of — phthalic acid isomers and/or aliphatic dicarboxylic acids, — aliphatic diols, and — fatty acid end-caps with: — a hydroxyl number of 120 mg KOH or more but not more than 350 mg KOH, — a viscosity at 25 °C of 2 000  cPs or more but not more than 8 000  cPs, and — an acid value less than 10 mg KOH/g 0 % - 31.12.2023
0.5057 ex 3907 99 80 80 Copolymer, consisting of 72 % by weight or more of terephthalic acid and/ or derivatives thereof and cyclohexanedimethanol, completed with linear and/ or cyclic dioles 0 % - 31.12.2025
0.2923 ex 3908 90 00 10 Poly(iminomethylene-1,3-phenylenemethyleneiminoadipoyl), in one of the forms mentioned in note 6 (b) to Chapter 39 0 % - 31.12.2023
0.3261 ex 3908 90 00 30 Reaction product of mixtures of octadecanecarboxylic acids polymerised with an aliphatic polyetherdiamine 0 % - 31.12.2023
0.7428 ex 3909 20 00 10 Polymer mixture, containing by weight: — 60 % or more but not more than 75 % of melamine resin (CAS RN 9003-08-1), — 15 % or more but not more than 25 % of silicon dioxide (CAS RN 14808-60-7 or 60676-86-0), — 5 % or more but not more than 15 % of cellulose (CAS RN 9004-34-6), and — 1 % or more but not more than 15 % of phenolic resin (CAS RN 25917-04-8) 0 % - 31.12.2022
0.5032 ex 3909 40 00 20 Powder of thermosetting resin in which magnetic particles have been evenly distributed, for use in the manufacture of ink for photocopiers, fax machines, printers and multifunction devices (1) 0 % - 31.12.2025
0.7865 ex 3909 40 00 70 Polymer in the form of flakes composed of 98 % or more by weight of phenolic resin (brominated octylphenol-formaldehyde) with a softening point of 80°C or more but not exceeding 95°C according to standard ASTM E28-92 (CAS RN 112484-41-0) 0 % - 31.12.2024
0.4595 ex 3909 50 90 10 UV curable water soluble liquid photopolymer consisting of a mixture by weight of — 60 % or more of two-functional acrylated polyurethane oligomers and — 30 % (± 8 %) of mono-functional and tri-functional (metha) acrylates, and — 10 % (± 3 %) of hydroxyl functionalized mono-functional (metha) acrylates 0 % - 31.12.2024
0.6423 ex 3909 50 90 20 Preparation containing by weight: — 14 % or more but not more than 18 % of ethoxylated polyurethane modified with hydrophobic groups, — 3 % or more but not more than 5 % of enzymatically modified starch, and — 77 % or more but not more than 83 % of water 0 % - 31.12.2024
0.6420 ex 3909 50 90 30 Preparation containing by weight: — 16 % or more but not more than 20 % of ethoxylated polyurethane modified with hydrophobic groups, — 19 % or more but not more than 23 % of diethylene glycol butyl ether, and — 60 % or more but not more than 64 % of water 0 % - 31.12.2024
0.6424 ex 3909 50 90 40 Preparation containing by weight: — 34 % or more but not more than 36 % of ethoxylated polyurethane modified with hydrophobic groups, — 37 % or more but not more than 39 % of propylene glycol, and — 26 % or more but not more than 28 % of water 0 % - 31.12.2024
0.6921 ex 3910 00 00 15 Dimethyl, methyl(propyl(polypropylene oxide)) siloxane (CAS RN 68957-00-6), trimethylsiloxy-terminated 0 % - 31.12.2026
0.3260 ex 3910 00 00 20 Block copolymer of poly(methyl-3,3,3-trifluoropropylsiloxane) and poly[methyl(vinyl)siloxane] 0 % - 31.12.2023
0.7057 ex 3910 00 00 25 Preparations containing by weight: — 10 % or more, 2-hydroxy-3-[3-[1,3,3,3-tetramethyl-1-[(trimethylsilyl)oxy] disiloxanyl] propoxy] propyl-2-methyl-2-propenoate (CAS RN 69861-02-5), and — 10 % or more, α-Butyldimethylsilyl- ω -3-[(2-methyl-1-oxo-2-propen-1-yl)oxy]propyl-terminated silicone polymer (CAS RN 146632-07-7) 0 % - 31.12.2026
0.7058 ex 3910 00 00 35 Preparations containing by weight: — 30 % or more, α -Butyldimethylsilyl- ω -(3-methacryloxy-2-hydroxypropyloxy)propyldimethylsilyl-polydimethylsiloxane (CAS RN 662148-59-6) and — 10 % or more, N,N – Dimethylacrylamide (CAS RN 2680-03-7) 0 % - 31.12.2026
0.4049 ex 3910 00 00 40 Silicones of a kind used in the manufacture of long term surgical implants 0 % - 31.12.2026
0.7217 ex 3910 00 00 45 Dimethyl siloxane, hydroxy-terminated polymer with a viscosity of 38-100 MPa·s (CAS RN 70131-67-8) 0 % - 31.12.2026
0.4300 ex 3910 00 00 50 Silicone based pressure sensitive adhesive in solvent containing copoly(dimethylsiloxane/diphenylsiloxane) gum 0 % - 31.12.2022
0.7218 ex 3910 00 00 55 Preparation containing by weight: — 55 % or more but not more than 65 % of vinyl terminated polydimethylsiloxane (CAS RN 68083-19-2), — 30 % or more but not more than 40 % of dimethylvinylated and trimethylated silica (CAS RN 68988-89-6), and — 1 % or more but not more than 5 % of silicic acid, sodium salt, reaction products with chlorotrimethylsilane and isopropyl alcohol (CAS RN 68988-56-7) 0 % - 31.12.2026
0.4845 ex 3910 00 00 60 Polydimethylsiloxane, whether or not polyethylene glycol and trifluoropropyl substituted, with methacrylate end groups 0 % - 31.12.2024
0.7953 ex 3910 00 00 65 Liquid copolymer based on polydimethylsiloxane with terminal epoxide groups CAS RN 2102536-93-4) 0 % - 31.12.2025
0.5926 ex 3910 00 00 70 Passivating silicon coating in primary form, to protect edges and prevent short circuits in semiconductor devices 0 % - 31.12.2023
0.8097 ex 3910 00 00 75 Copolymer of 80 % dimethylsiloxane, 10 % methyl methacrylate and 10 % butyl acrylate in the form of a white powder 0 % - 31.12.2025
0.6324 ex 3910 00 00 80 Monomethacryloxypropylterminated poly(dimethylsiloxane) 0 % - 31.12.2024
0.4413 ex 3911 10 00 81 Non-hydrogenated hydrocarbon resin, obtained by polymerization of more than 75 % by weight C-5 to C-12 cycloaliphatic alkenes and more than 10 % but not more than 25 % by weight aromatic alkenes yielding a hydrocarbon resin with: — an iodine value of more than 120 and — a Gardner Colour of more than 10 for the pure product or — a Gardner Colour of more than 8 for a 50 % solution by weight in toluene (as determined by the ASTM method D 6166) 0 % - 31.12.2023
0.8220 ex 3911 90 19 15 Polyetherimide of 4,4'-[(isopropylidene)bis(p-phenylenoxy)]diphthalic dianhydride and 1,3-benzenediamine or 1,4-benzenediamine (CAS RN 61128-46-9 or CAS RN 61128-47-0) 0 % - 31.12.2026
0.7163 ex 3911 90 19 20 Set of two components, in a volume ratio of 1:1, intended to produce a thermosetting polydicyclopentadiene after mixing, both components containing: — 83 % or more by weight of 3a,4,7,7a-tetrahydro-4,7-methanoindene (dicyclopentadiene), — a synthetic rubber, — whether or not containing by weight 7 % or more of tricyclopentadiene. and each separate component containing: — either an aluminium-alkyl compound, — or an organic complex of tungsten — or an organic complex of molybdenum 0 % - 31.12.2023
0.4280 ex 3911 90 19 30 Copolymer of ethyleneimine and ethyleneimine dithiocarbamate, in an aqueous solution of sodium hydroxide 0 % - 31.12.2022
0.5145 ex 3911 90 19 40 m-Xylene formaldehyde resin 0 % - 31.12.2026
0.6519 ex 3911 90 19 70 Preparation, containing: — Cyanic acid, C,C'-((1-methylethylidene)di-4,1-phenylene) ester, homopolymer (CAS RN 25722-66-1), — 1,3-Bis(4-cyanophenyl)propane (CAS RN 1156-51-0), — in a solution of butanone (CAS RN 78-93-3) with a content of less than 50 % by weight 0 % - 31.12.2024
0.8218 ex 3911 90 99 23 Aqueous solution consisting of by weight 25 % or more, but not more than 40 % of a poly(isobutylene-maleic anhydride) modified with: — N,N-dimethylpropane-1,3-diamine, — a copolymer of ethylene oxide and propylene oxide, having aminopropyl and methoxy end-groups, — ethanol (CAS RN 497926-97-3) 0 % - 31.12.2026
0.3257 ex 3911 90 99 25 Copolymer of vinyltoluene and α-methylstyrene 0 % - 31.12.2023
0.5109 ex 3911 90 99 35 Alternated copolymer of ethylene and maleic anhydride (EMA) 0 % - 31.12.2025
0.8009 ex 3911 90 99 38 Mixture containing by weight: — 90 % (± 1 %) of 1,4:5,8- Dimethanonaphthalene, 2-ethylidene-1,2,3,4,4a,5,8,8a-octahydro-,polymer with 3a,4,7,7a- tetrahydro- 4,7-methano-1H-indene, hydrogenated (CAS RN 881025-72-5), and — 10 % (± 1 %) of a hydrogenated styrene butadiene copolymer (CAS RN 66070-58-4) 0 % - 31.12.2025
0.3221 ex 3911 90 99 40 Mixed calcium and sodium salt of a copolymer of maleic acid and methyl vinyl ether, having a calcium content of 9 % or more but not more than 16 % by weight 0 % - 31.12.2023
0.3256 ex 3911 90 99 45 Copolymer of maleic acid and methyl vinyl ether 0 % - 31.12.2023
0.8010 ex 3911 90 99 48 Mixture containing by weight: — 90 % (± 1 %) of 1,4:5,8-dimethanonaphthalene, 2-ethylidene-1,2,3,4,4a,5,8,8a-octahydro-, polymer with 3a,4,7,7a-tetrahydro-4,7-methano-1H-indene, hydrogenated (CAS RN 881025-72-5), and — 10 % (± 1 %) of an ethylene-propylene copolymer (CAS RN 9010-79-1) 0 % - 31.12.2025
0.5729 ex 3911 90 99 53 Hydrogenated polymer of 1,2,3,4,4a,5,8,8a-octahydro-1,4:5,8-dimethanonaphthalene with 3a,4,7,7a-tetrahydro-4,7-methano-1H-indene and 4,4a,9,9a-tetrahydro-1,4-methano-1H-fluorene (CAS RN 503442-46-4) 0 % - 31.12.2022
0.5730 ex 3911 90 99 57 Hydrogenated polymer of 1,2,3,4,4a,5,8,8a-octahydro-1,4:5,8-dimethanonaphthalene with 4,4a,9,9a-tetrahydro-1,4-methano-1H-fluorene (CAS RN 503298-02-0) 0 % - 31.12.2022
0.3255 ex 3911 90 99 65 Calcium zinc salt of a copolymer of maleic acid and methyl vinyl ether 0 % - 31.12.2023
0.4091 ex 3911 90 99 86 Copolymer of methyl vinyl ether and maleic acid anhydride (CAS RN 9011-16-9) 0 % - 31.12.2026
0.4912 ex 3912 11 00 30 Cellulose triacetate (CAS RN 9012-09-3) 0 % - 31.12.2026
0.4953 ex 3912 11 00 40 Cellulose diacetate powder 0 % - 31.12.2025
0.3251 ex 3912 39 85 10 Ethylcellulose, not plasticized 0 % - 31.12.2023
0.3253 ex 3912 39 85 20 Ethylcellulose, in the form of an aqueous dispersion containing hexadecan-1-ol and sodium dodecyl sulphate, containing by weight 27 (± 3) % of ethylcellulose 0 % - 31.12.2023
0.3252 ex 3912 39 85 30 Cellulose, both hydroxyethylated and alkylated with alkyl chain-lengths of 3 or more carbon atoms 0 % - 31.12.2023
0.5172 ex 3912 39 85 40 Hypromellose (INN) (CAS RN 9004-65-3) 0 % - 31.12.2022
0.6718 ex 3912 39 85 50 Polyquaternium 10 (CAS RN 68610-92-4) 0 % - 31.12.2025
0.4017 ex 3912 90 10 20 Hydroxypropyl methylcellulose phthalate 0 % - 31.12.2023
0.3898 ex 3913 90 00 30 Protein, chemically or enzymatically modified by carboxylation and/or phthalic acid addition, whether or not hydrolysed, having a weight average molecular weight (Mw) of less than 350 000 0 % - 31.12.2023
0.3749 ex 3913 90 00 85 Sterile sodium hyaluronate (CAS RN 9067-32-7) 0 % - 31.12.2023
0.3249 ex 3913 90 00 95 Chondroitinsulphuric acid, sodium salt (CAS RN 9082-07-9) 0 % - 31.12.2023
0.4797 ex 3916 20 00 91 Profiles of poly(vinyl chloride) of a kind used in the manufacture of sheet pilings and facings, containing the following additives: — titanium dioxide, — poly(methyl methacrylate), — calcium carbonate, — binding agents 0 % - 31.12.2024
0.5988 ex 3916 90 10 10 Rods with cellular structure, containing by weight: — polyamide-6 or poly(epoxy anhydride) — 7 % or more but not more than 9 % of polytetrafluorethylene if present — 10 % or more but not more than 25 % of inorganic fillers 0 % - 31.12.2023
0.8116 ex 3917 31 00 ex 3917 32 00 ex 3917 39 00 30 20 20 Tubings: — with an outer diameter of 0,33 mm or more but not more than 3,3 mm, — with an inner diameter of 0,01 mm or more but not more than 2,1 mm, — suitable for a maximum working pressure rate from 2,7 MPa up to 70 MPa, — suitable for all solutions used in chromatography, — whether or not with fused silica, — whether or not covered with PEEK, for use in chromatographic system (1) 0 % - 31.12.2026
0.8268 ex 3917 32 00 30 Heat shrinkable tube: — containing by weight 80 % or more polymer, — with an insulation resistance of 90 MW or more, — with a dielectric strength of 35 kV / mm or more, — with a wall thickness of 0,04 mm or more, but not more than 0,9 mm, — with a lay-flat width of 18 mm or more, but not more than 156 mm, for use in the manufacture of aluminium electrolytic capacitors (2) 0 % - 31.12.2022
0.8117 ex 3917 40 00 20 Plastic fittings (kit of nuts and ferrules or nuts) and connectors: — threaded, — supported with or without a stainless steel ring, — suitable for a maximum working pressure rate of 2,7 MPa or more but not more than 114 MPa, for tubings with: — outer diameter of 0,33 mm or more but not more than 3,3 mm, — suitable for a maximum working pressure rate of 2,7 MPa or more but not more than 114 MPa, — suitable for all solutions used in chromatography, for use in the production of chromatographic systems (1) 0 % - 31.12.2026
0.4641 ex 3917 40 00 91 Plastic connectors containing O-rings, a retainer clip and a release system for insertion into car fuel hoses 0 % - 31.12.2024
0.2421 ex 3919 10 19 ex 3919 10 80 ex 3919 90 80 10 25 31 Reflecting film, consisting of a layer of polyurethane, with, on one side, security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, and embedded glass beads and, on the other side, an adhesive layer, covered on one side or on both sides with a release film 0 % - 31.12.2023
0.4800 ex 3919 10 80 ex 3919 90 80 27 20 Polyester film: — coated on one side with an acrylic thermal release adhesive that debonds at temperatures of 90 °C or more but not more than 200 °C, and a polyester liner, and — on the other side not coated or coated with an acrylic pressure sensitive adhesive or with an acrylic thermal release adhesive that debonds at temperatures of 90 °C or more but not more than 200 °C, and a polyester liner 0 % - 31.12.2024
0.2910 ex 3919 10 80 35 Reflecting film, consisting of a layer of poly(vinyl chloride), a layer of alkyd polyester, with, on one side, security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, only visible by means of a retroreflecting lighting, and embedded glass beads and, on the other side, an adhesive layer, covered on one side or on both sides with a release film 0 % - 31.12.2023
0.4757 ex 3919 10 80 37 Polytetrafluoroethylene film: — with a thickness of 100 μm or more, — an elongation at break of not more than 100 %, — coated on one side with a pressure sensitive silicon adhesive 0 % - 31.12.2025
0.4093 ex 3919 10 80 ex 3919 90 80 40 43 Black poly(vinyl chloride) film: — with a gloss of more than 30 degrees according to ASTM D 2457, — whether or not covered on one side with a protective poly(ethyleneterephthalate) film, and on the other side with a pressure sensitive adhesive with channels and a release liner 0 % - 31.12.2022
0.4761 ex 3919 10 80 ex 3919 90 80 43 26 Ethylene vinyl acetate film: — of a thickness of 100 μm or more, — coated on one side with an acrylic pressure sensitive or UV-sensitive adhesive and a polyester or polypropylene liner 0 % - 31.12.2022
0.4303 ex 3919 10 80 ex 3919 90 80 45 45 Reinforced polyethylene foam tape, coated on both sides with an acrylic micro channelled pressure sensitive adhesive and on one side a liner, with an application thickness of 0,38 mm or more but not more than 1,53 mm 0 % - 31.12.2022
0.8109 ex 3919 10 80 48 Plastic strips of polypropylene, — self-adhesive, — unilaterally adhesive-coated with an Acrylic Polymer, — in rolls with a width of 20 cm or less, — with a thickness including adhesion layer of 0,03 mm or less, for use in the manufacturing of lithium-ion electric rechargeable batteries (1) 3,2 % - 31.12.2022
0.3035 ex 3919 10 80 ex 3919 90 80 ex 3920 10 89 50 41 25 Adhesive film consisting of a base of a copolymer of ethylene and vinyl acetate (EVA) of a thickness of 70 μm or more and an adhesive part of acrylic type of a thickness of 5 μm or more, for use in the grinding and/or dicing process of silicon discs (1) 0 % - 31.12.2023
0.3036 ex 3919 10 80 ex 3919 90 80 55 53 Acrylic foam tape, covered on one side with a heat activatable adhesive or an acrylic pressure sensitive adhesive and on the other side with an acrylic pressure sensitive adhesive and a release sheet, of a peel adhesion at an angle of 90 o of more than 25 N/cm (as determined by the ASTM D 3330 method) 0 % - 31.12.2022
0.2416 ex 3919 10 80 ex 3919 90 80 ex 3920 61 00 57 30 30 Reflecting sheet: — of a polycarbonate or acrylic polymer film embossed on one side in a regular shaped pattern — covered on one or both sides with one or more layers of plastic or metallisation, and — whether or not covered on one side with a self-adhesive layer and a release sheet 0 % - 31.12.2023
0.6886 ex 3919 10 80 63 Reflecting film consisting of — a layer of an acrylic resin with imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, — a layer of an acrylic resin having embedded glass beads, — a layer of an acrylic resin hardened by a melamine cross-linking agent, — a metal layer, — an acrylic adhesive, and — a release film 0 % - 31.12.2025
0.4545 ex 3919 10 80 ex 3919 90 80 73 50 Self-adhesive reflecting sheet whether or not in segmented pieces, — whether or not containing a watermark, — with or without an application tape coated on one side with an adhesive; the reflective sheet consists of: — a layer of acrylic or vinyl polymer, — a layer of poly(methyl methacrylate) or polycarbonate containing microprisms, — a layer of metallisation, — an adhesive layer, and — a release sheet — whether or not containing an additional layer of polyester 0 % - 31.12.2023
0.5166 ex 3919 10 80 ex 3919 90 80 75 80 Self-adhesive reflecting film, consisting of several layers including: — a copolymer of acrylic resin, — polyurethane, — a metallised layer with, on one side, laser imprints against counterfeiting, alteration or substitution of data or duplications, or an official mark for an intended use, — glass microspheres, and — an adhesive layer, with a release liner on one or both sides 0 % - 31.12.2026
0.4799 ex 3919 10 80 ex 3919 90 80 85 28 Poly(vinyl chloride), poly(ethyleneterephthalate), polyethylene or any other polyolefin film: — coated on one side with an acrylic UV-sensitive adhesive and a liner — of a total thickness of 65 μm or more without release liner 0 % - 31.12.2024
0.4414 ex 3919 90 80 19 Transparent poly(ethylene terephthalate) self-adhesive film: — free from impurities or faults, — coated on one side with an acrylic pressure sensitive adhesive and a protective liner, and on the other side with an antistatic layer of ionic organic choline compound, — whether or not with a printable dust-proof layer of modified long chain alkyl organic compound, — with a total thickness without the liner of 54 μm or more but not more than 64 μm, and — a width of more than 1 295  mm but not more than 1 305  mm 0 % - 31.12.2023
0.7415 ex 3919 90 80 21 Polytetrafluoroethylene film, — with a thickness of 50 μm or more but not more than 155 μm, — with a width of 6,30 mm or more but not more than 585 mm, — an elongation at break of not more than 200 %, and — coated on one side with a pressure sensitive silicone adhesive with a thickness of not more than 40 μm 0 % - 31.12.2022
0.4314 ex 3919 90 80 22 Polyester, polyethylene or polypropylene film coated on one or both sides with an acrylic and/or rubber pressure sensitive adhesive, whether or not supplied with a release liner, put up in rolls of a width of 45,7 cm or more but not more than 160 cm 0 % - 31.12.2024
0.3243 ex 3919 90 80 23 Film consisting of 1 to 3 laminated layers of poly(ethylene terephthalate) and a copolymer of terephthalic acid, sebacic acid and ethylene glycol, coated on one side with an acrylic abrasion resistant coating and on the other side with an acrylic pressure sensitive adhesive, a water soluble methylcellulose coating and a poly(ethylene terephthalate) protective liner 0 % - 31.12.2023
0.4760 ex 3919 90 80 24 Reflecting laminated sheet: — consisting of an epoxy acrylate layer embossed on one side in a regular shaped pattern, — covered on both sides with one or more layers of plastic material and — covered on one side with an adhesive layer and a release sheet 0 % - 31.12.2024
0.4415 ex 3919 90 80 33 Transparent poly(ethylene) self-adhesive film, free from impurities or faults, coated on one side with an acrylic pressure sensitive adhesive, with a thickness of 60 μm or more, but not more than 70 μm, and with a width of more than 1 245  mm but not more than 1 255  mm 0 % - 31.12.2023
0.4398 ex 3919 90 80 35 Reflecting layered sheet on rolls, with a width of more than 20 cm, showing an embossed regular pattern, consisting of poly(vinyl chloride) film coated on one side with: — a layer of polyurethane containing glass micro beads, — a layer of poly(ethylene vinyl acetate), — an adhesive layer, and — a release sheet 0 % - 31.12.2023
0.7503 ex 3919 90 80 37 Polyethylene or polycarbonate film, cut into ready to use forms, — one side partly printed whereby part of the printing either gives information about the meaning of LED’s visible at the unprinted areas, or marks those points which must be touched to operate the system, — the other side partly covered with an adhesive layer, — both sides covered with a release liner, and — with dimensions of not more than 14 cm x 2,5 cm, for use in the manufacture of push-button switches for mechatronic system adjustable furniture (1) 0 % - 31.12.2023
0.4445 ex 3919 90 80 49 Reflecting laminated sheet consisting of a film of poly(methyl methacrylate) embossed on one side in a regular shaped pattern, a film of a polymer containing glass microspheres, an adhesive layer and a release sheet 0 % - 31.12.2023
0.5507 ex 3919 90 80 51 Biaxially-oriented film of poly(methyl methacrylate), of a thickness of 50 μm or more but not exceeding 90 μm, covered on one side with an adhesive layer and a release sheet 0 % - 31.12.2023
0.4532 ex 3919 90 80 54 Poly(vinyl chloride) film, on one side covered with — a polymer layer — an adhesive layer — a release liner, on one side embossed, containing oblate spheres; whether or not on the other side covered with an adhesive layer and a metallised polymer layer 0 % - 31.12.2024
0.4947 ex 3919 90 80 65 Self-adhesive film with a thickness of 40 μm or more, but not more than 475 μm, consisting of one or more layers of transparent, metallised or dyed poly(ethylene terephthalate), covered on one side with a scratch resistant coating and on the other side with a pressure sensitive adhesive and a release liner 0 % - 31.12.2025
0.4925 ex 3919 90 80 70 Self-adhesive polishing discs of microporous polyurethane, whether or not coated with a pad 0 % - 31.12.2025
0.4964 ex 3919 90 80 82 Reflecting film consisting of: — a polyurethane layer, — a glass microspheres layer, — a metallised aluminium layer, and — an adhesive, covered on one or both sides with a release liner, — whether or not a poly(vinyl chloride) layer, — a layer whether or not incorporating security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use 0 % - 31.12.2025
0.4459 ex 3919 90 80 83 Reflector or diffuser sheets, in rolls, — for protection against ultraviolet or infra-red heat radiation, to be affixed to windows or — for equal transmission and distribution of light, intended for LCD modules 0 % - 31.12.2022
0.3241 ex 3920 10 25 30 Mono-layered High-Density Polyethylene film: — containing by weight 99 % or more of polyethylene, — with a thickness of 12 μm or more but not more than 20 μm, — with a length of 4 000  m or more but not more than 7 000  m, — with a width of 600 mm or more but not more than 900 mm 0 % - 31.12.2023
0.4419 ex 3920 10 28 91 Poly(ethylene) film printed with a graphic design, which is achieved by using four base colours in ink plus specialist colours, to achieve multiple colours in ink on one side of the film, and one colour on the opposite side, the graphic design also has the following characteristics: — is repetitive and equally spaced along the length of the film — is equally and visibly aligned when viewed from the back or front of the film 0 % - 31.12.2023
0.6640 ex 3920 10 40 40 Tubular layered film predominately of polyethylene: — consisting of a tri-layer barrier with a core layer of ethylene vinyl alcohol covered on either side with a layer of polyamide, covered on either side with at least one layer of polyethylene, — having a total thickness of 55 μm or more, — having a diameter of 500 mm or more but not more than 600 mm 0 % - 31.12.2025
0.3754 ex 3920 10 89 40 Composite sheet containing an acrylic coating and laminated to a high-density polyethylene layer, of a total thickness of 0,8 mm or more but not more than 1,2 mm 0 % - 31.12.2022
0.8149 ex 3920 10 89 45 Octene and ethylene copolymer plastic film of a thickness of 0,45 mm or more but not more than 0,75 mm, for use in the manufacture of glass to glass photovoltaic solar panels (1) 0 % - 31.12.2022
0.5139 ex 3920 10 89 55 Ethylene vinyl acetate (EVA) film: — with a raised relief surface with embossed undulations, — not laminated, — not cross-linked, and — with a thickness of more than 0,3 mm 0 % - 31.12.2026
0.5482 ex 3920 20 21 40 Sheets of biaxially - oriented polypropylene film: — with the thickness of not more than 0,1 mm, — printed on both sides with specialised coatings to allow banknote security printing 0 % - 31.12.2023
0.8205 ex 3920 20 21 50 Biaxialy oriented film of multiple layers of polypropylene, with a total thickness of not more than 14 micron 0 % - 31.12.2026
0.4394 ex 3920 20 29 60 Mono-axial oriented film, of a total thickness of not more than 75μm, consisting of three or four layers, each layer containing a mixture of polypropylene and polyethylene, with a core layer whether or not containing titanium dioxide, having: — a tensile strength in the machine direction of 120 MPa or more but not more than 270 MPa and — a tensile strength in the transverse direction of 10 MPa or more but not more than 40 MPa as determined by test method ASTM D882/ISO 527-3 0 % - 31.12.2023
0.3028 ex 3920 20 29 70 Mono-axial oriented film, consisting of three layers, each layer consisting of a mixture of polypropylene and a copolymer of ethylene and vinyl acetate, with a core layer whether or not containing titanium dioxide, having: — a thickness of 55 μm or more but not more than 97 μm, — a tensile modulus in the machine direction of 0,30 GPa or more but not more than 1,45 GPa, and — a tensile modulus in the transverse direction of 0,20 GPa or more but not more than 0,70 GPa 0 % - 31.12.2024
0.5167 ex 3920 20 29 94 Mono-axial oriented, co-extruded film: — consisting of 3 to 5 layers, — each layer mainly consisting of polypropylene and/or polyethylene, — each layer containing not more than 10 % by weight of other polymers, — whether or not containing titanium dioxide in the core layer, — of an overall thickness of not more than 75 μm 0 % - 31.12.2022
0.3024 ex 3920 43 10 92 Sheeting of poly(vinyl chloride), stabilized against ultraviolet rays, without any holes, even microscopic, of a thickness of 60 μm or more but not more than 80 μm, containing 30 or more but not more than 40 parts of plasticiser to 100 parts of poly(vinyl chloride) 0 % - 31.12.2023
0.3235 ex 3920 43 10 ex 3920 49 10 94 93 Film of a specular gloss of 70 or more, measured at an angle of 60 ° using a glossmeter (as determined by the ISO 2813:2000 method), consisting of one or two layers of poly(vinyl chloride) coated on both sides with a layer of plastic, of a thickness of 0,26 mm or more but not more than 1,0 mm, covered on the gloss surface with a protective film of polyethylene, in rolls of a width of 1 000  mm or more but not more than 1 450  mm, for use in the manufacture of goods of heading 9403  (1) 0 % - 31.12.2023
0.3026 ex 3920 43 10 95 Reflecting laminated sheet, consisting of a film of poly(vinyl chloride) and a film of an other plastic totally embossed in a regular pyramidal pattern, covered on one side with a release sheet 0 % - 31.12.2023
0.5930 ex 3920 49 10 30 Film of a (polyvinyl)chloride-copolymer — containing by weight 45 % or more of fillers — on a support 0 % - 31.12.2023
0.3021 ex 3920 51 00 20 Plate of poly(methyl methacrylate) containing aluminium trihydroxide, of a thickness of 3,5 mm or more but not more than 19 mm 0 % - 31.12.2023
0.5506 ex 3920 51 00 30 Biaxially-oriented film of poly(methyl methacrylate), of a thickness of 50 μm or more but not exceeding 90 μm 0 % - 31.12.2023
0.5753 ex 3920 51 00 40 Sheets of polymethylmethacrylate conforming to standard EN 4366 (MIL-PRF-25690) 0 % - 31.12.2023
0.7949 ex 3920 61 00 40 Extruded thermoplastic foils or films of polycarbonate with: — matt surface texture on both sides — a thickness of more than 50 μm but not more than 200 μm, — a width of 800 mm or more, but not more than 1 500  mm, and — a length of 300 m or more, but not more 2 500 m 0 % - 31.12.2025
0.8274 ex 3920 61 00 50 Coextruded film of polycarbonate main layer and polymethyl methacrylate top layer with a: — total thickness of more than 230 μm but not more than 270 μm, — top layer thickness of more than 40 μm but not more than 55 μm, — defined surface roughness of the top layer of 0,5 μm or less (according to ISO 4287), — UV-stabilized top layer 0 % - 31.12.2026
0.7418 ex 3920 62 19 ex 3920 62 90 05 10 Poly(ethylene terephthalate) film in rolls: — with a thickness of 0,335 mm or more but not more than 0,365 mm, and — coated with a gold layer with a thickness of 0,03 μm or more but not more than 0,06 μm 0 % - 31.12.2022
0.3234 ex 3920 62 19 08 Poly(ethylene terephthalate) film, not coated with an adhesive, of a thickness of not more than 25 μm, either: — only dyed in the mass, or — dyed in the mass and metallised on one side 0 % - 31.12.2023
0.3017 ex 3920 62 19 12 Film of poly(ethylene terephthalate) only, of a total thickness of not more than 120 μm, consisting of one or two layers each containing a colouring and/or UV-absorbing material throughout the mass, uncoated with an adhesive or any other material 0 % - 31.12.2023
0.3022 ex 3920 62 19 18 Laminated film of poly(ethylene terephthalate) only, of a total thickness of not more than 120 μm, consisting of one layer which is metallised only and one or two layers each containing a colouring and/or UV-absorbing material throughout the mass, uncoated with an adhesive or any other material 0 % - 31.12.2023
0.3034 ex 3920 62 19 20 Reflecting polyester sheeting embossed in a pyramidal pattern, for the manufacture of safety stickers and badges, safety clothing and accessories thereof, or of school satchels, bags or similar containers (1) 0 % - 31.12.2023
0.3356 ex 3920 62 19 38 Poly(ethylene terephthalate) film, of a thickness of not more than 12 μm, coated on one side with a layer of aluminium oxide of a thickness of not more than 35 nm 0 % - 31.12.2023
0.3357 ex 3920 62 19 48 Sheets or rolls of poly(ethylene terephthalate): — coated on both sides with a layer of epoxy acrylic resin, — of a total thickness of 37 μm (± 3 μm) 0 % - 31.12.2025
0.2589 ex 3920 62 19 52 Film of polyethylene terephthalate, polyethylene naphthalate or similar polyester, coated on one side with metal and/or metal oxides, containing by weight less than 0,1 % of aluminium, of a thickness of not more than 300 μm and having a surface resistivity of not more than 10 000  Ohms (per square) (as determined by the ASTM D257 method) 0 % - 31.12.2023
0.4344 ex 3920 62 19 60 Poly(ethylene terephthalate) film: — of a thickness of not more than 20 μm, — coated on at least one side with a gas barrier layer consisting of a polymeric matrix in which silica or aluminium oxide has been dispersed and of a thickness of not more than 2μm 0 % - 31.12.2022
0.8011 ex 3920 62 19 ex 3920 62 90 68 20 Poly(ethylene terephthalate) film in rolls: — with a thickness of 50 μm or more but not more than 350 μm, and — covered with a layer of sputtered precious metal such as gold or palladium with a thickness of 0,02 μm or more but not more than 0,06 μm 0 % - 31.12.2025
0.4520 ex 3920 62 19 76 Transparent poly(ethylene terephthalate) film: — coated on both sides with layers of organic substances on the basis of acryl of a thickness of 7 nm or more but not more than 80 nm, — with a surface tension of 36 Dyne/cm or more but not more than 39 Dyne/cm, — with a light transmission of more than 93 %, — with a haze value of not more than 1,3 %, — with a total thickness of 10 μm or more but not more than 350 μm, — with a width of 800 mm or more but not more than 1 600  mm 0 % - 31.12.2023
0.3328 ex 3920 69 00 20 Film of poly(ethylene naphthalene-2,6-dicarboxylate) 0 % - 31.12.2023
0.7882 ex 3920 69 00 30 Mono- or multilayer, transverse oriented, shrink film: — composed of more than 85 % by weight of polylactic acid, not more than 5 % by weight of inorganic or organic additives and not more than 10 % by weight of additives based on biodegradable polyesters, — with a thickness of 20 μm or more but not more than 100 μm, — with a length of 2 385 m or more but not more than 9 075 m, — biodegradable and compostable (as determined by the method EN 13432) 0 % - 31.12.2024
0.6483 ex 3920 69 00 50 Monolayer, biaxially oriented film: — composed of more than 85 % by weight of poly(lactic acid) and not more than 10,50 % by weight of modified poly(lactic acid) based polymer, poly-glycol ester and talc, — having a thickness of 20 μm or more but not more than 120 μm — biodegradable and compostable (as determined by the method EN 13432) 0 % - 31.12.2024
0.6484 ex 3920 69 00 60 Monolayer, transverse oriented, shrink film: — composed of more than 80 % by weight of poly(lactic acid) and not more than 15,75 % by weight of additives of modified poly(lactic acid), — having a thickness of 45 μm or more but not more than 50 μm, — biodegradable and compostable (as determined by the method EN 13432) 0 % - 31.12.2024
0.7883 ex 3920 69 00 70 Mono- or multilayer, biaxially oriented film: — composed of more than 85 % by weight of polylactic acid, not more than 5 % by weight of inorganic or organic additives, and not more than 10 % by weight of additives based on biodegradable polyesters, — with a thickness of 9 μm or more but not more than 120 μm, — with a length of 1 395 m or more but not more than 21 560 m, — biodegradable and compostable (as determined by the method EN 13432) 0 % - 31.12.2024
0.6515 ex 3920 79 10 10 Sheets of painted vulcanised fibre-board with a thickness of not more than 1,5 mm 0 % p/st 31.12.2024
0.4766 ex 3920 91 00 52 Poly(vinyl butyral) film: — containing by weight 26 % or more but not more than 30 % of triethyleneglycol bis(2-ethyl hexanoate) as a plasticiser, — with a thickness of 0,73 mm or more but not more than 1,50 mm 0 % - 31.12.2024
0.3329 ex 3920 91 00 91 Poly(vinyl butyral) film having a graduated coloured band 3 % - 31.12.2023
0.3136 ex 3920 91 00 93 Film of poly(ethylene terephthalate), whether or not metallised on one or both sides, or laminated film of poly(ethylene terephthalate) films, metallised on the external sides only, and having the following characteristics: — a visible light transmission of 50 % or more, — coated on one or both sides with a layer of poly(vinyl butyral) but not coated with an adhesive or any other material except poly(vinyl butyral), — a total thickness of not more than 0,2 mm without taking the presence of poly(vinyl butyral) into account and a thickness of poly(vinyl butyral) of more than 0,2 mm 0 % - 31.12.2024
0.4508 ex 3920 91 00 95 Co-extruded trilayer poly(vinyl butyral) film with a graduated colour band containing by weight 29 % or more but not more than 31 % of 2,2'-ethylenedioxydiethyl bis(2-ethylhexanoate) as a plasticiser 0 % - 31.12.2023
0.3917 ex 3920 99 28 40 Polymer film containing the following monomers: — poly (tetramethylene ether glycol), — bis (4-isocyanotocyclohexyl) methane, — 1,4-butanediol or 1,3-butanediol, — with a thickness of 0,25 mm or more but not more than 5,0 mm, — embossed with a regular pattern on one surface, — and covered with a release sheet 0 % - 31.12.2023
0.5938 ex 3920 99 28 45 Transparent polyurethane film metallised on one side: — with a gloss of more than 90 degrees according to ASTM D 2457 — covered on the metallised side with a heat bonding adhesive layer consisting of polyethylene/polypropylene copolymer — covered on the other side with a protective poly(ethylene terephthalate) film — with a total thickness of more than 204 μm but not more than 244 μm 0 % - 31.12.2024
0.8005 ex 3920 99 28 48 Thermoplastic polyurethane foil in rolls, with: — a width of 900 mm or more but not more than 1 016  mm, — a matt finish, — a thickness of 0,4 mm (± 8 %), — an elongation at break of 480 % or more (ASTM D412 (Die C)), — a tensil strength in machine direction of 470 (± 10) kg/cm2 (ASTM D412 (Die C)), — a Shore A hardness of 90 (± 3) (ASTM D 2240), — a tear strength of 100 (± 10) kg/cm2 (ASTM D624 (Die C)), — a melting point of 165°C (± 10 °C) 0 % - 31.12.2025
0.4192 ex 3920 99 28 50 Thermoplastic polyurethane film, of a thickness of 250 μm or more but not more than 350 μm, covered on one side with a removable protective film 0 % - 31.12.2026
0.6579 ex 3920 99 28 65 Matt, thermoplastic polyurethane foil in rolls with: — a width of 1 640  mm (± 10 mm), — a gloss of 3,3 degrees or more but not more than 3,8 (as determined by the method ASTM D 2457), — a surface roughness of 1,9 Ra or more but not more than 2,8 Ra (as determined by the method ISO 4287), — a thickness of more than 365 μm but not more than 760 μm, — a hardness of 90 (± 4) (as determined by the method: Shore A (ASTM D 2240)), — an elongation to break of 470 % (as determined by the method: EN ISO 527) 0 % m2 31.12.2024
0.5315 ex 3920 99 28 70 Sheets on rolls, consisting of epoxy resin, with conducting properties, containing: — microspheres with a coating of metal, whether or not alloyed with gold, — an adhesive layer, — with a protective layer of silicone or poly(ethylene terephthalate) on one side, — with a protective layer of poly(ethylene terephthalate) on the other side, and — with a width of 5 cm or more but not more than 100 cm — with a length of not more than 2 000  m 0 % - 31.12.2026
0.3326 ex 3920 99 59 25 Poly(1-chlorotrifluoroethylene) film 0 % - 31.12.2023
0.7603 ex 3920 99 59 30 Poly(tetrafluoroethylene) film containing by weight 10 % or more of graphite 0 % - 31.12.2023
0.2873 ex 3920 99 59 55 Ion-exchange membranes of fluorinated plastic material 0 % - 31.12.2023
0.3135 ex 3920 99 59 65 Film of a vinyl alcohol copolymer, soluble in cold water, of a thickness of 34 μm or more but not more than 90 μm, a tensile strength at break of 20 MPa or more but not more than 55 MPa and an elongation at break of 250 % or more but not more than 900 % 0 % - 31.12.2023
0.7529 ex 3920 99 59 75 Film of fluorinated ethylene propylene resin (CAS RN 25067-11-2) with: — a thickness of 0,010 mm or more but not more than 0,80 mm, — a width of 1 219  mm or more but not more than 1 575  mm, and — a melting point of 252 °C (measured according ASTM D-3418) 0 % - 31.12.2023
0.4095 ex 3920 99 90 20 Anisotropic conductive film, in rolls, of a width of 1,2 mm or more but not more than 3,15 mm and a maximum length of 300 m, used for joining electronic components in the production of LCD or plasma displays 0 % - 31.12.2023
0.3318 ex 3921 13 10 10 Sheet of polyurethane foam, of a thickness of 3 mm (± 15 %) and of a specific gravity of 0,09435 or more but not more than 0,10092 0 % m3 31.12.2024
0.5815 ex 3921 13 10 20 Rolls of open-cell polyurethane foam: — with a thickness of 2,29 mm (± 0,25 mm), — surface-treated with a foraminous adhesion promoter, and — laminated to a polyester film and a layer of textile material 0 % - 31.12.2022
0.6066 ex 3921 19 00 30 Blocks with cellular structure, containing by weight: — polyamide-6 or poly(epoxy anhydride) — 7 % or more but not more than 9 % of polytetrafluorethylene if present — 10 % or more but not more than 25 % of inorganic fillers 0 % - 31.12.2023
0.6911 ex 3921 19 00 40 Transparent, microporous, acrylic acid grafted polyethylene film, in the form of rolls, with: — a width of 98 mm or more but not more than170 mm, — a thickness of 15 μm or more but not more than 36 μm, of a kind used for the manufacture of alkaline battery separators 3,2 % - 31.12.2022
0.7263 ex 3921 19 00 45 Microporous monolayer film of polypropylene or a microporous trilayer film of polypropylene, polyethylene and polypropylene, each film with: — zero transversal production direction (TD) shrinkage, — a total thickness of 8 μm or more, but not more than 50 μm, — a width of 15 mm or more, but not more than 900 mm, — a length of more than 200 m, but not more than 8 000 m, — an average pore size between 0,02 μm and 0,1 μm, — laminated or not with a Polypropylene non-woven mat of 50 to 200 μm thickness, 3,2 % - 31.12.2022
— coated or not with surfactant, — coated or not on 1 or 2 sides with a ceramic layer of min 1 μm thickness or more, but not more than 5 μm, — coated or not on 1 or 2 sides with a sticky binder, PVdF type or similar of min 0,5 μm thickness or more, but not more than 5 μm
0.7132 ex 3921 19 00 50 Porous membrane of polytetrafluorethylene (PTFE) laminated to a polyester spunbonded non-woven cloth with — a total thickness of more than 0,05 mm but not more than 0,20 mm, — a water entry pressure between 5 and 200 kPa according to ISO 811, and — an air permeability of 0,08 cm3/cm2/s or more according to ISO 5636-5 0 % - 31.12.2026
0.7280 ex 3921 19 00 60 Multi-porous multilayer separator foil with: — one microporous polyethylene layer between two microporous polypropylene layers and whether or not containing a coating of aluminium oxide on both sides, — a width of 65 mm or more but not more than 170 mm, — a total thickness of 0,01 mm or more but not more than 0,03 mm, — a porosity of 0,25 or more but not more than 0,65 0 % m2 31.12.2022
0.7309 ex 3921 19 00 70 Microporous membranes of expanded Polytetrafluoroethylene (ePTFE) in rolls, having: — a width of 1 600  mm or more but not more than 1 730  mm, and — a membrane thickness of 15 μm or more, but not more than 50 μm for use in the manufacture of a bi-component ePTFE membrane (1) 0 % - 31.12.2022
0.3314 ex 3921 19 00 93 Strip of microporous polytetrafluoroethylene on a support of a non-woven, for use in the manufacture of filters for kidney dialysis equipment (1) 0 % - 31.12.2023
0.3002 ex 3921 19 00 95 Film of polyethersulfone, of a thickness of not more than 200 μm 0 % - 31.12.2023
0.3003 ex 3921 90 10 10 Composite plate of poly(ethylene terephthalate) or of poly(butylene terephthalate), reinforced with glass fibres 0 % - 31.12.2023
0.4379 ex 3921 90 10 20 Poly(ethylene terephthalate) film, laminated on one side or on both sides with a layer of unidirectional nonwoven poly(ethylene terephthalate) and impregnated with polyurethane or epoxide resin 0 % - 31.12.2023
0.6156 ex 3921 90 10 30 Multilayer film consisting of: — a poly(ethylene terephthalate) film with a thickness of more than 100 μm but not more than 150 μm, — a primer of phenolic material with a thickness of more than 8 μm but not more than 15 μm, — an adhesive layer of a synthetic rubber with a thickness of more than 20 μm but not more than 30 μm, — and a transparent poly(ethylene terephthalate) liner with a thickness of more than 35 μm but not more than 40 μm 0 % m2 31.12.2023
0.4844 ex 3921 90 55 25 Prepreg sheets or rolls containing polyimide resin 0 % - 31.12.2024
0.7510 ex 3921 90 55 35 Glass fiber impregnated with epoxy resin for use in the manufacture of smart cards (1) 0 % m2 31.12.2023
0.6742 ex 3921 90 55 40 Three layered fabric sheet, in rolls, — comprising a core layer of 100 % Nylon Taffeta or Nylon/Polyester blended Taffeta, — coated on both sides with polyamide, — of a total thickness not more than 135 μm, — of a total weight not more than 80 g/m2 0 % m2 31.12.2025
0.8291 ex 3921 90 55 60 Membrane composed of a polyamide layer and a polysulfone layer on a cellulose support layer with: — a total thickness of 0,25 mm or more but not more than 0,40 mm, — a total weight of 109 g/m2 or more but not more than 114 g/m2 0 % - 31.12.2026
0.3312 ex 3921 90 60 35 Ion-exchange membranes based on a fabric coated on both sides with fluorinated plastic material, for use in chlor-alkali electrolytic cells (1) 0 % - 31.12.2023
0.5396 ex 3923 10 90 10 Photomask or wafer compacts: — consisting of antistatic materials or blended thermoplastics proving special electrostatic discharge (ESD) and outgassing properties, — having non porous, abrasion resistant or impact resistant surface properties, — fitted with a specially designed retainer system that protects the photomask or wafers from surface or cosmetic damage and — with or without a gasket seal, of a kind used in the photolithography or other semiconductor production to house photomasks or wafers 0 % - 31.12.2026
0.7630 ex 3926 30 00 40 Plastic internal door handle used in the manufacture of motor vehicles (1) 0 % - 31.12.2023
0.7335 ex 3926 30 00 ex 3926 90 97 50 48 Coated interior or exterior decorative parts consisting of: — a copolymer of acrylonitrile-butadiene-styrene (ABS), whether or not mixed with polycarbonate, and — a PVC foil, — not containing layers of copper, nickel or chromium, for use in the manufacturing of parts for motor vehicles of heading 8701 to 8705  (1) 0 % p/st 31.12.2022
0.2764 ex 3926 90 97 10 Microspheres of a polymer of divinylbenzene, of a diameter of 4,5 μm or more but not more than 80 μm 0 % - 31.12.2023
0.3756 ex 3926 90 97 15 Glass fibre reinforced plastic traverse leaf spring for use in the manufacture of motor vehicle suspension systems (1) 0 % - 31.12.2023
0.2978 ex 3926 90 97 20 Reflecting sheeting or tape, consisting of a facing-strip of poly(vinyl chloride) embossed in a regular pyramidal pattern, heat-sealed in parallel lines or in a grid-pattern to a backing-strip of plastic material, or of knitted or woven fabric covered on one side with plastic material 0 % - 31.12.2023
0.6717 ex 3926 90 97 23 Plastic cover with clips for the exterior rear-view mirror of motor vehicles 0 % p/st 31.12.2025
0.7445 ex 3926 90 97 27 Gasket of polyethylene foam, intended to fill-up the space between the body of a motor vehicle and the base of a rear-view mirror 0 % - 31.12.2023
0.5474 ex 3926 90 97 30 Parts of car radio and car air-conditioner front panels — of acrylonitrile-butadiene-styrene with or without polycarbonate, — coated with a copper, a nickel and a chrome layers, — with a total thickness of coating of 5,54 μm or more but not more than 49,6 μm 0 % - 31.12.2026
0.6301 ex 3926 90 97 33 Housings, housing parts, drums, setting wheels, frames, covers, upper part, design plate and other parts of acrylonitrile-butadiene-styrene, polycarbonate, polymethylmethacrylate or thermoplastic polyurethane, of a kind used for the manufacture of remote controls 0 % p/st 31.12.2024
0.7061 ex 3926 90 97 40 Silicone shell for breast implant 0 % - 31.12.2026
0.3850 ex 3926 90 97 43 Mixture of water and by weight 19 % or more but not more than 35 % of expanded hollow microspheres of a copolymer of acrylonitrile, methacrylonitrile and isobornyl methacrylate or other methacrylate, of a diameter of 3 μm or more but not more than 4,95 μm 0 % - 31.12.2023
0.6166 ex 3926 90 97 50 Knob of car radio front panel, made of Bisphenol A-based polycarbonate, in immediate packings of not less than 300 pieces 0 % p/st 31.12.2023
0.8118 ex 3926 90 97 58 Plastic ferrules and/or plugs: — supported with or without a stainless steel ring, — suitable for a maximum working pressure rate of 2,7 MPa or more but not more than 114 MPa, for tubings with: — outer diameter of 0,33 mm or more but not more than 3,3 mm, — suitable for a maximum working pressure rate of 2,7 MPa or more but not more than 114 MPa, — suitable for all solutions used in chromatography, for use in the production of chromatographic systems (1) 0 % - 31.12.2026
0.7196 ex 3926 90 97 77 Silicone decoupling ring with an inner diameter of 14,7 mm or more but not more than 16,0 mm, in immediate packings of 2 500 pieces or more, of a kind used in car parking aid sensor systems 0 % p/st 31.12.2026
0.3046 ex 4007 00 00 10 Siliconated vulcanised rubber thread and cord 0 % - 31.12.2023
0.6708 ex 4009 42 00 20 Rubber brake hose with: — textile strings, — a wall thickness of 3,2 mm, — a metal hollow terminal pressed on both ends, and — one or more mounting brackets, for use in the manufacture of goods of Chapter 87 (1) 0 % - 31.12.2025
0.7042 ex 4010 31 00 ex 4010 33 00 ex 4010 39 00 10 10 10 Vulcanized rubber endless transmission belt of trapezoidal cross-section (V-belts) with longitudinal V-ribbed pattern on the inner side for use in the manufacture of goods of Chapter 87 (1) 0 % - 31.12.2023
0.6844 ex 4016 93 00 30 Rectangular ethylene-propylene-diene rubber gasket, with: — a length of 72 mm or more but not more than 825 mm, — a width of 18 mm or more but not more than 155 mm, — a peak temperature of 150°C or more but not more than 240°C, — a permissible material outflow at the place of the mold split of not more than 0,3 mm 0 % - 31.12.2025
0.7170 ex 4016 99 57 10 Air intake hose for air supply to the combustion part of the engine comprising at least: — one flexible rubber hose, — one plastic hose, and — metal clips, — whether or not a resonator for use in the manufacture of goods of Chapter 87 (1) 0 % p/st 31.12.2026
0.7357 ex 4016 99 57 30 Pin boot of a brake calliper made of vulcanized rubber with: — an inner diameter of not less than 5 mm and an outer diameter of not more than 35 mm, — a height of 15 mm or more, but not more than 40 mm, and — a ribbed design for use in the manufacture of goods of Chapter 87 (1) 0 % - 31.12.2022
0.5148 ex 4016 99 97 30 Tyre moulding bladder 0 % - 31.12.2026
0.5842 ex 4104 41 19 10 Buffalo leather, split, chrome tanned synthetic retanned (‘crust’), dry 0 % - 31.12.2022
0.2555 4105 10 00 4105 30 90 Sheep or lamb skin leather, without wool on, tanned or retanned but not further prepared, whether or not split, other than leather of heading 4114 0 % - 31.12.2023
0.2553 4106 21 00 4106 22 90 Goat or kid skin leather, without hair on, tanned or retanned but not further prepared, whether or not split, other than leather of heading 4114 0 % - 31.12.2023
0.2554 4106 31 00 4106 32 00 4106 40 90 4106 92 00 Leather of other animals, without hair on, not further prepared than tanned, other than leather of heading 4114 0 % - 31.12.2023
0.6223 ex 4408 39 30 10 Okoume veneer sheets: — of a length of 1 270  mm or more, but not more than 3 200  mm, — of a width of 150 mm or more, but not more than 2 000  mm, — of a thickness of 0,5 mm or more, but not more than 4 mm, — not sanded and — not planed 0 % - 31.12.2023
0.4217 ex 5004 00 10 10 Silk yarn (other than yarn spun from silk waste) not put up for retail sale, unbleached, scoured or bleached, entirely of silk 0 % - 31.12.2026
0.2551 ex 5005 00 10 ex 5005 00 90 10 10 Yarn spun entirely from silk waste (noil), not put up for retail sale 0 % - 31.12.2023
0.2544 5208 11 10 Fabrics for the manufacture of bandages, dressings and medical gauzes 5,2 % - 31.12.2023
0.7372 ex 5311 00 90 10 Plain-woven fabric of paper yarns glued on a tissue paper layer: — with a weight of 190 g/m2 or more but not more than 280 g/m2, and — cut into rectangles with a side length of 40 cm or more but not more than 140 cm 0 % - 31.12.2022
0.7515 ex 5311 00 90 20 Sisal cloth in rolls with; — a length of 20 metres or more but not more than 30 metres and — a maximum width of 2,5 metres for use in the production of Stainless Steel Kitchenware (1) 0 % - 31.12.2023
0.7608 ex 5402 44 00 10 Synthetic elastomeric filament yarn: — untwisted or with a twist not exceeding 50 turns per metre, measuring 300 dtex or more but not more than 1 000 dtex, — composed of polyurethane ureas based on a copolyether glycol of tetrahydrofuran and 3-methyltetrahydrofuran, for use in the manufacture of disposable hygiene products of heading 9619  (1) 0 % - 31.12.2023
0.2975 ex 5402 49 00 30 Yarn of a copolymer of glycollic acid with lactic acid, for the manufacture of surgical sutures (1) 0 % - 31.12.2023
0.3098 ex 5402 49 00 50 Non-textured filament yarn of poly(vinyl alcohol) 0 % - 31.12.2023
0.3096 ex 5402 49 00 70 Synthetic filament yarn, single, containing by weight 85 % or more of acrylonitrile, in the form of a wick containing 1 000 continuous filaments or more but not more than 25 000 continuous filaments, of a weight per metre of 0,12 g or more but not more than 3,75 g and of a length of 100 m or more, for the manufacture of carbon-fibre yarn (1) 0 % m 31.12.2023
0.8108 ex 5403 31 00 10 Continuous viscose rayon filament yarn of 105 dtex or more but not more than 117 dtex, and consisting of 36 monofilaments or more but not more than 40 monofilaments 0 % - 31.12.2025
0.6884 ex 5403 39 00 10 Biodegradable (norm EN 14995) monofilament of not more than 33 dtex, containing at least 98 % by weight polylactide (PLA), for use in the manufacture of filtration fabrics for the food industry (1) 0 % - 31.12.2022
0.2481 ex 5404 19 00 50 Monofilaments of polyester or poly(butylene terephthalate), with cross-sectional dimension of 0,5 mm or more but not more than 1 mm, for use in the manufacture of zippers (1) 0 % - 31.12.2023
0.8225 ex 5404 19 00 60 Chemically tapered synthetic filaments of polyester with: — a diameter of 0,1 mm or more but not more than 0,6 mm, — a length of 30 mm or more but not more than 120 mm, for use in the manufacture of paintbrushes (1) 0 % - 31.12.2026
0.3311 ex 5404 90 90 20 Strip of polyimide 0 % - 31.12.2023
0.4258 ex 5407 10 00 10 Textile fabric, consisting of warp filament yarns of polyamide-6,6 and weft filament yarns of polyamide-6,6, polyurethane and a copolymer of terephthalic acid, p-phenylenediamine and 3,4'–oxybis (phenyleneamine) 0 % - 31.12.2022
0.3090 ex 5503 11 00 ex 5601 30 00 10 40 Synthetic staple fibres of a copolymer of terephthalic acid, p-phenylenediamine and 3,4'-oxybis(phenyleneamine), of a length of not more than 7 mm 0 % - 31.12.2023
0.3214 ex 5503 90 00 ex 5506 90 00 ex 5601 30 00 20 10 10 Poly(vinyl alcohol) fibres, whether or not acetalized 0 % - 31.12.2023
0.3212 ex 5603 11 10 ex 5603 11 90 ex 5603 12 10 ex 5603 12 90 ex 5603 91 10 ex 5603 91 90 ex 5603 92 10 ex 5603 92 90 10 10 10 10 10 10 10 10 Poly(vinyl alcohol) non-wovens, in the piece or cut into rectangles: — of a thickness of 200 μm or more but not more than 280 μm and — of a weight of 20 g/m2 or more but not more than 50 g/m2 0 % m2 31.12.2023
0.2552 ex 5603 12 90 ex 5603 13 90 ex 5603 14 90 ex 5603 92 90 ex 5603 93 90 ex 5603 94 90 30 30 10 60 40 30 Non-wovens of aromatic polyamide fibres obtained by polycondensation of m-phenylenediamine and isophthalic acid, in the piece or cut into rectangles 0 % m2 31.12.2023
0.2548 ex 5603 12 90 ex 5603 13 90 60 60 Non-woven of spunbonded polyethylene, of a weight of more than 60 g/m2 but not more than 80 g/m2 and an air resistance (Gurley) of 8 seconds or more but not more than 36 seconds (as determined by the ISO 5636/5 method) 0 % m2 31.12.2023
0.5059 ex 5603 13 10 20 Non-woven of spunbonded polyethylene, with a coating, — of a weight of more than 80 g/m2 but not more than 105 g/m2 and — an air resistance (Gurley) of 8 seconds or more but not more than 75 seconds (as determined by the ISO 5636/5 method) 0 % m2 31.12.2025
0.8024 ex 5603 14 10 30 Non-wovens, consisting of poly(ethylene terephthalate) spun bonded media: — of weight of 160 g/m2 or more but not more than 300 g/m2, — with a filtration efficiency of class M or better (according to DIN 60335-2-69), — pleatable, with at least one of following treatments: — a coating or covering with polytetrafluoroethylene (PTFE), — a coating with aluminium particles, — a coating of phosphorous based flame retardants, — a nano fiber coating of a polyamide, a polyurethane or a fluorine-containing polymer 0 % m2 31.12.2023
0.5987 ex 5603 14 90 60 Non-wovens, consisting of poly(ethylene terephthalate) spun bonded media: — of weight of 160 g/m2 or more but not more than 300 g/m2, — with a filtration efficiency of class M or better (according to DIN 60335-2-69), — pleatable, — with or without an expanded polytetrafluoroethylene (ePTFE) membrane 0 % m2 31.12.2023
0.3041 ex 5603 92 90 ex 5603 93 90 20 20 Non-wovens consisting of a meltblown central layer of a thermoplastic elastomer laminated on each side with spunbonded filaments of polypropylene 0 % m2 31.12.2023
0.3042 ex 5603 92 90 ex 5603 94 90 70 40 Non-wovens, consisting of multiple layers of a mixture of meltblown fibres and staple fibres of polypropylene and polyester, whether or not laminated on one side or on both sides with spunbonded filaments of polypropylene 0 % m2 31.12.2023
0.5197 ex 5603 92 90 ex 5603 93 90 80 50 Non-woven polyolefin fabric, consisting of an elastomeric layer, laminated on each side with polyolefin filaments: — a weight of 25 g/m2 or more but not more than 150 g/m2, — in the piece or simply cut into squares or rectangles, — not impregnated, — with cross-directional or machine-directional stretch properties for use in the manufacture of infant/child care products (1) 0 % m2 31.12.2026
0.6135 ex 5603 93 90 60 Nonwovens made of polyester fibres, — with a weight of 85 g/m2, — with a constant thickness of 95 μm (± 5 μm), — neither coated nor covered, — in 1 m wide rolls of 2 000 m to 5 000 m length, suitable for the coating of membranes in the manufacture of osmosis and reverse osmosis filters (1) 0 % m2 31.12.2023
0.3210 ex 5603 94 90 20 Acrylic fibre rods, having a length of not more than 50 cm, for the manufacture of pen tips (1) 0 % m2 31.12.2023
0.3406 ex 5607 50 90 10 Unsterilised twine of poly(glycolic acid) or of poly(glycolic acid) and its copolymers with lactic acid, plaited or braided, with an inner core, for the manufacture of surgical sutures (1) 0 % - 31.12.2024
0.2415 ex 5803 00 10 91 Gauze of cotton, of a width of less than 1 500  mm 0 % - 31.12.2023
0.7081 ex 5903 20 90 20 Two layers' plastic-laminated textile fabric with: — one layer consisting of knitted or crocheted polyester textile fabric, — other layer consisting of polyurethane foam, — a weight of 150 g/m2 or more, but not more than 500 g/m2, — a thickness of 1 mm or more, but not more than 5 mm for use in the manufacture of the retractable roof of motor vehicles (1) 0 % - 31.12.2026
0.2417 ex 5906 99 90 10 Rubberised textile fabric, consisting of warp yarns of polyamide-6,6 and weft yarns of polyamide-6,6, polyurethane and a copolymer of terephthalic acid, p-phenylenediamine and 3,4'-oxybis(phenyleneamine) 0 % - 31.12.2023
0.8213 ex 5906 99 90 30 Woven and coated rubberised textile fabric with the following characteristics: — with three layers, — the outer layers consist of a natural rubber, EPDM and chloropen rubber compound, — the middle layer consists of polyester fabric, for use in the manufacture of life rafts (1) 0 % - 31.12.2026
0.2453 ex 5907 00 00 10 Textile fabrics, coated with adhesive in which are embedded spheres of a diameter of not more than 150 μm 0 % - 31.12.2026
0.3207 ex 5911 90 99 ex 8421 99 90 30 92 Parts of equipment for the purification of water by reverse osmosis, consisting essentially of plastic-based membranes, supported internally by woven or non-woven textile materials which are wound round a perforated tube, and enclosed in a cylindrical plastic casing of a wall-thickness of not more than 4 mm, whether or not housed in a cylinder of a wall-thickness of 5 mm or more 0 % - 31.12.2023
0.4638 ex 5911 90 99 40 Multi-layered non-woven polyester polishing pads, impregnated with polyurethane 0 % - 31.12.2024
0.7340 ex 5911 90 99 50 Loudspeaker vibration damper, made from round, corrugated, flexible and cut-to-size tissue of textile fibres of polyester, cotton or aramid or a combination hereof, of a kind used in car loudspeakers 0 % - 31.12.2022
0.6469 ex 6804 21 00 20 Discs — of synthetic diamonds which are agglomerated with a metal alloy, ceramic alloy or plastic alloy, — having a self-sharpening effect by constant release of the diamonds, — suitable for abrasive cutting of wafers, — whether or not containing a hole in the centre, — whether or not on a support — with a weight of not more than 377 g per piece and — with an external diameter of not more than 206 mm 0 % p/st 31.12.2024
0.2755 ex 6813 89 00 20 Friction material, of a thickness of less than 20 mm, not mounted, for use in the manufacture of friction components (1) 0 % - 31.12.2023
0.5931 ex 6814 10 00 10 Agglomerated mica with a thickness of not more than 0,15 mm, on rolls, whether or not calcined, whether or not reinforced with aramid fibres 0 % - 31.12.2023
0.2546 ex 6903 90 90 40 Silicon carbide reactor tubes and holders having a maximum service temperature of 1 370  °C or more 0 % - 31.12.2023
0.4978 ex 6909 19 00 20 Silicon nitride (Si3N4) rollers or balls 0 % - 31.12.2025
0.6071 ex 6909 19 00 25 Ceramic proppants, containing aluminium oxide, silicon oxide and iron oxide 0 % - 31.12.2023
0.3403 ex 6909 19 00 30 Supports for catalysts, consisting of porous cordierite or mullite ceramic pieces, of an overall volume of not more than 65 l, having, per cm2 of the cross-section, not less than one continuous channel which may be open at both ends or stopped at one end 0 % - 31.12.2023
0.8028 ex 6909 19 00 40 Ceramic-carbon absorption or adsorption cartridges of fuel motor vehicle systems, with the following characteristics: — extruded fired ceramic bound multicellular cylindrical structure, — 5 % or more by weight but not more than 70 % by weight of activated carbon, — 30 % or more by weight but no more than 90 % by weight of ceramic binder, — with a diameter of 29 mm or more but no more than 41 mm, — a length of not more than 150 mm, — fired at temperature of 800 °C or more 0 % p/st 31.12.2025
0.2538 ex 6909 19 00 ex 6914 90 00 50 20 Ceramic articles made of continuous filaments of ceramic oxides, containing by weight: — 2 % or more of diboron trioxide, — 28 % or less of silicon dioxide and — 60 % or more of dialuminium trioxide 0 % - 31.12.2023
0.3766 ex 6909 19 00 60 Supports for catalysts, consisting of porous ceramic pieces, of a blend of silicon carbide and silicon, with a hardness of less than 9 on the Mohs scale, with a total volume of not more than 65 litres, having, per cm2 of the surface of the cross section one or more closed channels at the tail end 0 % - 31.12.2023
0.4582 ex 6909 19 00 70 Supports for catalysts or filters, consisting of porous ceramics made primarily from oxides of aluminium and titanium; with a total volume of not more than 65 litres and at least one duct (open on one or both ends) per cm2 of cross section 0 % - 31.12.2023
0.3404 ex 6914 90 00 30 Ceramic microspheres, transparent, obtained from silicon dioxide and zirconium dioxide, of a diameter of more than 125 μm 0 % - 31.12.2024
0.6286 ex 7006 00 90 25 Glass wafer made of borosilicate float glass — with a total thickness variation of 1 μm or less, and — laser-engraved 0 % p/st 31.12.2024
0.7619 ex 7006 00 90 40 Plates of sodalime or borosilicate glass of STN (Super Twisted Nematic) or TN (Twisted Nematic) quality having: — a length of 300 mm or more but not more than 1 500  mm, — a width of 300 mm or more but not more than 1 500  mm, — a thickness of 0,5 mm or more but not more than 1,1 mm, — an indium-tin-oxide coating with a resistance of 80 Ω or more, but not more than 160 Ω on one side, — with or without a passivation layer of silicon dioxide (SiO2) between indium-tin-oxide layer and glass surface, — with or without a multi layer anti-reflection-coating on the other side, and — machined (chamfered) edges 0 % - 31.12.2023
0.8265 ex 7007 11 10 10 Specifically shaped and toughened safety glass: — with a width of 200 mm or more but not more than 600 mm, — with a height of 150 mm or more but not more than 500 mm, for use in the manufacture of motor vehicle window assemblies (2) 0 % - 31.12.2026
0.6380 ex 7009 10 00 30 Layered glass with mechanical dimming ability by different angles of incident light comprising: — whether or not a layer of chrome, — a break-resistance adhesive tape or hot-melt adhesive, and — a release film on the front side and protective paper at the back side, of a kind used for interior rear-view mirrors of vehicles 0 % p/st 31.12.2024
0.6870 ex 7009 10 00 40 Electrochromic self-dimming inside rear-view mirror, consisting of: — a mirror support — a plastic casing and — an integrated circuit for use in the manufacture of motor vehicles of Chapter 87 (1) 0 % - 31.12.2025
0.5789 ex 7009 10 00 50 Unfinished electro-chromic auto-dimming mirror for motor vehicle rear-view mirrors: — whether or not equipped with plastic backing plate, — whether or not equipped with a heating element, — whether or not equipped with Blind Spot Module (BSM) display 0 % - 31.12.2022
0.3400 ex 7014 00 00 10 Optical elements of glass (other than those of heading 7015 ), not optically worked, other than signalling glassware 0 % - 31.12.2023
0.3161 ex 7019 12 00 ex 7019 12 00 02 22 Rovings, measuring 650 tex or more but not more than 2 500 tex, coated with a layer of polyurethane whether or not mixed with other materials 0 % - 31.12.2023
0.5750 ex 7019 12 00 ex 7019 12 00 05 25 Rovings ranging from 1 980 to 2 033 tex, composed of continuous glass filaments of 9 μm (± 0,5 μm) 0 % - 31.12.2022
0.2532 ex 7019 13 00 10 Yarn of 33 tex or a multiple thereof (± 7,5 %), obtained from continuous spun-glass filaments of a nominal diameter of 3,5 μm or of 4,5 μm, in which filaments of a diameter of 3 μm or more but not more than 5,2 μm predominate, other than those treated so as to improve their adhesion to elastomers 0 % - 31.12.2023
0.5749 ex 7019 13 00 15 S-glass yarn of 33 tex or a multiple of 33 tex (± 13 %) made from continuous spun-glass filaments with fibres of a diameter of 9 μm (- 1 μm / + 1,5 μm) 0 % - 31.12.2022
0.5021 ex 7019 13 00 20 Yarn of 10,3 tex or more but not more than 11,9 tex, obtained from continuous spun-glass filaments, in which filaments of a diameter of 4,83 μm or more but not more than 5,83 μm predominate 0 % - 31.12.2025
0.5020 ex 7019 13 00 25 Yarn of 5,1 tex or more but not more than 6,0 tex, obtained from continuous spun-glass filaments, in which filaments of a diameter of 4,83 μm or more but not more than 5,83 μm predominate 0 % - 31.12.2025
0.2535 ex 7019 13 00 30 Yarn of E-glass of 22 tex (± 1,6 tex), obtained from continuous spun-glass filaments of a nominal diameter of 7 μm, in which filaments of a diameter of 6,35 μm or more but not more than 7,61 μm predominate 0 % - 31.12.2024
0.4848 ex 7019 13 00 50 Yarn of 11 tex or a multiple thereof (± 7,5 %), obtained from continuous spun-glass filaments, containing 93 % by weight or more of silicon dioxide, of a nominal diameter of 6 μm or 9 μm, other than those treated 0 % - 31.12.2022
0.2872 ex 7019 13 00 55 Glass cord impregnated with rubber or plastic, obtained from K- or U-glass filaments, made up of: — 9 % or more but not more than 16 % of magnesium oxide, — 19 % or more but not more than 25 % of aluminium oxide, — 0 % or more but not more than 2 % of boron oxide, — without calcium oxide, coated with a latex comprising at least a resorcinol- formaldehyde resin and chlorosulphonated polyethylene 0 % - 31.12.2024
0.4476 ex 7019 61 00 ex 7019 61 00 ex 7019 65 00 ex 7019 65 00 ex 7019 65 00 ex 7019 65 00 ex 7019 65 00 ex 7019 65 00 ex 7019 65 00 ex 7019 66 00 ex 7019 66 00 ex 7019 66 00 ex 7019 66 00 ex 7019 66 00 ex 7019 66 00 ex 7019 66 00 ex 7019 90 00 ex 7019 90 00 11 19 11 12 13 14 15 18 19 11 12 13 14 15 18 19 11 19 Woven fabrics of rovings, impregnated with epoxy resin, with a coefficient of thermal expansion between 30°C and 120°C (measured according to IPC-TM-650) of: — 10ppm per°C or more but not more than 12ppm per°C in the length and width, and — 20ppm per°C or more but not more than 30ppm per°C in the thickness, with a glass transition temperature of 152°C or more but not more than 153°C (measured according IPC-TM-650) 0 % - 31.12.2023
0.7056 ex 7019 61 00 ex 7019 63 00 70 30 E-fibre glass fabrics: — having a weight of 20 g/m2 or more, but not more than 214 g/m2, — impregnated with silane, — in rolls, — having a humidity content by weight of 0,13 % or less, and — having not more than 3 hollow fibres out of 100 000 fibres, for the exclusive use in the manufacture of prepregs and copper clad laminates (1) 0 % m2 31.12.2026
0.7647 ex 7019 64 00 40 Epoxy resin coated glass woven fabric containing by weight: — 91 % or more but not more than 93 % of glass fibres, — 7 % or more but not more than 9 % of epoxy resin 0 % - 31.12.2023
0.4059 ex 7019 71 00 ex 7019 72 00 50 50 Non-woven product of non-textile glass fibre, for the manufacture of air filters or catalysts (1) 0 % - 31.12.2026
0.3940 ex 7019 90 00 10 Non-textile glass fibres in which fibres of a diameter of less than 4,6 μm predominate 0 % - 31.12.2023
0.3153 ex 7019 90 00 20 Glass cord impregnated with rubber or plastic, obtained from twisted glass filament yarns, coated with a latex comprising at least a resorcinol-formaldehyde-vinylpyridine resin and an acrylonitrile-butadiene rubber (NBR) 0 % - 31.12.2023
0.4024 ex 7019 90 00 30 High modulus glass cord (K) impregnated with rubber, obtained from twisted high modulus glass filament yarns, coated with a latex comprising a resorcinol-formaldehyde resin with or without vinylpyridine and/or hydrogenated acrylonitrile-butadiene rubber (HNBR) 0 % - 31.12.2023
0.5348 ex 7020 00 10 ex 7616 99 90 10 77 Television pedestal stands with or without bracket for fixation to and stabilization of television cabinet case/body 0 % p/st 31.12.2026
0.7266 ex 7020 00 10 20 Raw material for optical elements of fused silicon dioxide with: — a thickness of 10 cm or more but not more than 40 cm and — a weight of 100 kg or more 0 % p/st 31.12.2022
0.4127 ex 7201 10 11 10 Pig iron ingots with a length of not more than 350 mm, a width of not more than 150 mm, a height of not more than 150 mm 0 % - 31.12.2026
0.4128 ex 7201 10 30 10 Pig iron ingots with a length of not more than 350 mm, a width of not more than 150 mm, a height of not more than 150 mm, containing by weight not more than 1 % of silicon 0 % - 31.12.2026
0.3353 7202 50 00 Ferro-silico-chromium 0 % - 31.12.2023
0.4853 ex 7202 99 80 10 Ferro-dysprosium, containing by weight: — 78 % or more of dysprosium, and — 18 % or more but not more than 22 % of iron 0 % - 31.12.2025
0.7235 ex 7315 11 90 10 Roller type steel timing chain with a fatigue limit of 2 kN at 7 000 rpm or more for use in the manufacture of engines of motor vehicles (1) 0 % - 31.12.2022
0.7502 ex 7318 24 00 40 Tube or pipe restraint joint elements: — of stainless steel according to specification 17-4PH or of steel according to specification tool steel S7, — produced by metal injection moulding, — with a rockwell hardness of 38 HRC (± 1) or 53 HRC (+ 2/– 1), — measuring 7 mm x 4 mm x 5 mm or more, but not more than 40 mm x 20 mm x 10 mm 0 % - 31.12.2023
0.4548 ex 7320 90 10 91 Flat spiral spring of tempered steel, with: — a thickness of 2,67 mm or more, but not more than 4,11 mm, — a width of 12,57 mm or more, but not more than 16,01 mm, — a torque of 18,05 Nm or more, but not more than 73,5 Nm — an angle between the free position and the nominal position in exercise of 76° or more, but not more than 218° for use in the manufacture of tensioners for power transmission belts, for internal combustion engines (1) 0 % p/st 31.12.2023
0.4126 ex 7326 20 00 20 Metal fleece, consisting of a mass of stainless steel wires of diameters of 0,001 mm or more but not more than 0,070 mm, compacted by sintering and rolling 0 % - 31.12.2026
0.7414 ex 7326 90 92 40 Steel nozzle shell with integral flange in one piece open-die forged from 4 castings, worked and machined, with: — a diameter of 5 752  mm or more but not more than 5 758  mm, — a height of 3 452  mm or more but not more than 3 454  mm, — a total weight 167 875  kg or more but not more than 168 125 kg of a kind used for the fabrication of a nuclear reactor vessel 0 % p/st 31.12.2022
0.7891 ex 7326 90 94 40 Steel ball neck, drop forged, machined, also heat treated or surface treated, having an angle between the centre of the conical head and the arm of less than 90° or having an angle between the centre of the ball and the arm of less than 90°, for use in the manufacture of trailer hitches for passenger cars (1) 0 % - 31.12.2024
0.6680 ex 7326 90 98 ex 7907 00 00 40 10 Iron, steel and/or zinc alloy weights: — with a weight of not more than 500 grams and measuring not more than 107 mm x 107 mm x 11 mm, — whether or not with parts of other material, — whether or not with parts of other metals, — whether or not surface treated, — whether or not printed, of a kind used for the production of remote controls 0 % - 31.12.2025
0.7401 ex 7409 19 00 ex 7410 21 00 10 70 Plates or sheets: — with at least one layer of woven glass fibre, impregnated with a fire- retardant artificial or synthetic resin with a glass transition temperature (Tg) of more than 130 °C as measured according to IPC-TM-650, method 2.4.25, — coated on one or both sides with a copper film with a thickness of not more than 3,2 mm, and containing at least one of the following: — poly(tetrafluoroethylene) (CAS RN 9002-84-0) — poly(oxy-(2,6-dimethyl)-1,4-phenylene) (CAS RN 25134-01-4) — epoxy resin having a thermal expansion of not more than 10 ppm in length and width and not more than 25 ppm in height for use in the manufacture of circuit boards (1) 0 % - 31.12.2022
0.3352 ex 7410 21 00 10 Sheet or plate of polytetrafluoroethylene, containing aluminium oxide or titanium dioxide as filler or reinforced with glass-fibre fabric, covered on both sides with copper foil 0 % - 31.12.2023
0.7509 ex 7410 21 00 20 Foils, rolls composed of one layer of glass epoxy of 100 μm colaminated with refined copper foil on one or two sides of 35 μm with a tolerance of 10 % for use in the production of smart cards (1) 0 % m2 31.12.2023
0.3005 ex 7410 21 00 30 Film of polyimide, whether or not containing epoxide resin and/or glass fibre, covered on one side or on both sides with a copper foil 0 % - 31.12.2023
0.3926 ex 7410 21 00 40 Sheet or plates: — consisting of at least a central layer of paper or one central sheet of any type of nonwoven fibre, laminated on each side with glass-fibre fabric and impregnated with epoxide resin, or — consisting of multiple layers of paper, impregnated with phenolic resin, coated on one or both sides with a copper film with a maximum thickness of 0,15 mm 0 % - 31.12.2023
0.4479 ex 7410 21 00 50 Plates: — consisting of at least one layer of fibreglass fabric impregnated with thermosetting resin, — covered on one or both sides with copper foil with a thickness of not more than 0,15 mm, and — with a dielectric constant (DK) of less than 3,9 and a loss factor (Df) of less than 0,015 at a measuring frequency of 10 GHz, as measured according to IPC-TM-650 0 % - 31.12.2023
0.7341 ex 7413 00 00 20 Loudspeaker centring ring, consisting of one or more vibration dampers and minimum two non-insulated copper cables, therein woven or pressed 0 % - 31.12.2022
0.2447 ex 7419 80 90 ex 7616 99 90 91 60 Disc (target) with deposition material, consisting of molybdenum silicide: — containing 1mg/kg or less of sodium and — mounted on a copper or aluminium support 0 % - 31.12.2023
0.7911 ex 7506 20 00 10 Sheets and strips in coils of nickel alloy C276 (EN 2.4819) with — a thickness of 0,5 mm or more but not more than 3 mm, — a width of 770 mm or more but not more than 1 250  mm 0 % - 31.12.2024
0.7913 ex 7506 20 00 20 Sheets and strips in coils of nickel alloy to standard ASME SB-582/UNS N06030 with: — a thickness of 0,5 mm or more but not more than 3 mm, — a width of 250 mm or more but not more than 1 219  mm 0 % - 31.12.2025
0.5890 7601 20 20 Slabs and billets of unwrought aluminium alloys 4 % - 31.12.2023
0.7752 ex 7604 21 00 10 Hollow profile with: — one closed chamber of aluminum alloy 6063-T5 or 6060-T5, — a wall thickness of not more than 0,7 mm, and — an anodized layer of 10 μm at the surface, for use in the manufacture of board frames of whiteboards, cork boards, easel boards, education boards and display cases (1) 0 % - 31.12.2024
0.5029 ex 7604 29 10 ex 7606 12 99 ex 7606 12 99 10 21 25 Sheets and bars of aluminium-lithium alloys 0 % - 31.12.2022
0.6417 ex 7604 29 10 40 Bars and rods of aluminium alloys containing by weight : — 0,25 % or more but not more than 7 % of zinc, and — 1 % or more but not more than 3 % of magnesium, and — 1 % or more but not more than 5 % of copper, and — not more than 1 % of manganese consistent with the material specifications AMS QQ-A-225, of a kind used in aerospace industry (inter alia conforming NADCAP and AS9100) and obtained by rolling mill process 0 % - 31.12.2024
0.2410 ex 7605 19 00 10 Not alloyed aluminium wire, of a diameter of 2 mm or more but not more than 6 mm, covered with a layer of copper of a thickness of 0,032 mm or more but not more than 0,117 mm 0 % - 31.12.2023
0.6418 ex 7605 29 00 10 Wire of aluminium alloys containing by weight: — 0,10 % or more but not more than 5 % of copper, and — 0,2 % or more but not more than 6 % of magnesium, and — 0,10 % or more but not more than 7 % of zinc, and — not more than 1 % of manganese, consistent with the material specifications AMS QQ-A-430, of a kind used in aerospace industry (inter alia conforming NADCAP and AS9100) and obtained by rolling mill process 0 % m 31.12.2024
—————
0.7698 ex 7607 20 99 10 Aluminium foil, in rolls: — coated on one side with polypropylene or polypropylene and acid-modified polypropylene and on the other with polyamide and polyethylene terephthalate, with adhesive layers between them, — with a width of 200 mm or more, but not more than 400 mm, — with a thickness of 0,138 mm or more, but not more than 0,168 mm, for use in the manufacture of lithium-ion battery cell covers (1) 3,7 % - 31.12.2022
0.7746 ex 7608 20 81 20 Seamless aluminium alloyed extruded tubes (Aluminum 6061F according to standard ASTM B241) with: — an outer diameter of 320 mm or more but not more than 400 mm, and — a wall thickness of 8 mm or more but not more than 10 mm, for use in the manufacture of high pressure vessels (1) 0 % - 31.12.2024
0.6138 ex 7608 20 89 30 Seamless aluminium alloyed extruded tubes with: — an outer diameter of 60 mm or more but not more than 420 mm, and — a wall thickness of 10 mm or more but not more than 80 mm 0 % - 31.12.2023
0.7747 ex 7608 20 89 40 Seamless flow forming aluminium alloyed tubes (Aluminum 6061A according to standard ISO 7866) with: — an outer diameter of 378 mm or more but not more than 385 mm, and — a wall thickness of 4 mm or more but not more than 7 mm for use in the manufacture of high pressure vessels (1) 0 % - 31.12.2024
0.8194 ex 7609 00 00 ex 8415 90 00 30 45 Aluminium connecting block for automotive air conditioning systems: — with a T6 hardening, — equipped with round stubs with a circumferential outer groove, — with through or non-through holes, made of profiles with an upper radius of 8 mm or more but not more than 11 mm, and a lower radius of 12 mm or more but not more than 17 mm, — with a distance between holes of 15 mm or more but not more than 22 mm, — with sockets designed for brazing or clamping, — with mounting holes for M6 or M8 mounting screw, threaded or not, — with a width of 5 mm or more but not more than 16 mm, — for connecting a compressor, a condenser, an evaporator, a chiller and other lines 0 % - 31.12.2026
0.2445 ex 7613 00 00 20 Aluminium container, seamless, for compressed natural gas or compressed hydrogen, wholly embedded in an overwrap of epoxy-carbon fibres composite, of a storage capacity of 172 l (± 10 %) and an unfilled weight of not more than 64 kg 0 % p/st 31.12.2023
0.3928 ex 7616 99 90 15 Honeycomb aluminium blocks for use in the manufacture of aircraft parts (1) 0 % p/st 31.12.2023
0.6534 ex 7616 99 90 25 Metallised film: — consisting of eight or more layers of aluminium (CAS RN 7429-90-5) of a purity of 99,8 % or more, — with an optical density of each aluminium layer of not more than 3,0, — with each aluminium layer separated by a resin layer, — on a carrier film of PET, and — on rolls of up to 50 000 metres in length 0 % - 31.12.2024
0.7997 ex 7616 99 90 35 Aluminum plate with: — a length of 36 mm or more but not more than 49 mm, — a width of 29,8 mm or more but not more than 45,2 mm, — a thickness of 0,18 mm or more but not more than 0,66 mm, equipped with a polypropylene tape with: — a length of 6,5 mm or more but not more than 16,5 mm, — a width of 39 mm or more but not more than 56 mm, — characteristic allowing to create solid joint with Pouch external layer by melting process assuring leak and pressure proof sealing of Cell, — resistance to influence of electrolyte, for use in the manufacture of lithium-ion battery cells for motor vehicle batteries (1) 3 % - 31.12.2022
0.5357 ex 7616 99 90 ex 8482 80 00 ex 8807 30 00 70 10 40 Connecting components for use in the production of helicopter tail rotor shafts (1) 0 % p/st 31.12.2026
0.6730 ex 8101 96 00 10 Tungsten wire containing by weight 99 % or more of tungsten with: — a maximum cross-sectional dimension of not more than 50 μm — a resistance of 40 Ω or more but not more than 300 Ω at length of 1 metre 0 % - 31.12.2025
0.7245 ex 8101 96 00 20 Tungsten wire — containing by weight 99,95 % or more of tungsten, and — with a maximum cross-sectional dimension of not more than 1,02 mm 0 % - 31.12.2022
0.5694 ex 8102 10 00 10 Molybdenum powder with: — a purity by weight of 99 % or more and — a particle size of 1,0 μm or more, but not more than 5,0 μm 0 % - 31.12.2022
0.5097 ex 8104 30 00 35 Magnesium powder: — of purity by weight of more than 99,5 %, and — with a particle size of not more than 0,8 mm 0 % - 31.12.2025
0.3417 ex 8104 90 00 10 Ground and polished magnesium sheets, of dimensions not more than 1 500  mm × 2 000  mm, coated on one side with an epoxy resin insensitive to light 0 % - 31.12.2023
0.5838 ex 8105 90 00 10 Bars or wires made of cobalt alloy containing, by weight: — 35 % (± 2 %) cobalt, — 25 % (± 1 %) nickel, — 19 % (± 1 %) chromium and — 7 % (± 2 %) iron, conforming to the material specifications AMS 5842 0 % - 31.12.2023
0.3416 ex 8108 20 00 10 Titanium sponge 0 % - 31.12.2023
0.4553 ex 8108 20 00 30 Titanium powder of which 90 % by weight or more passes through a sieve with an aperture of 0,224 mm 0 % - 31.12.2023
0.7310 ex 8108 20 00 70 Titanium alloy slab, with — a height of 20,3 cm or more, but not more than 23,3 cm, — a length of 246,1 cm or more, but not more than 289,6 cm, — a width of 40,6 cm or more, but not more than 46,7 cm, — a weight of 820 kg or more but not more than 965 kg, containing alloy elements by weight of: — 5,2 % or more but not more than 6,2 % of aluminium, — 2,5 % or more but not more than 4,8 % of vanadium 0 % p/st 31.12.2022
0.3211 ex 8108 30 00 10 Waste and scrap of titanium and titanium alloys, except those containing by weight 1 % or more but not more than 2 % of aluminium 0 % - 31.12.2023
0.4363 ex 8108 90 30 10 Titanium alloy rods complying with standard EN 2002-1, EN 4267 or DIN 65040 0 % - 31.12.2024
0.7330 ex 8108 90 30 15 Rods and wire of an alloy of titanium with: — a uniform solid cross-section in the form of a cylinder, — with a diameter of 0,8 mm or more, but not more than 5 mm, — an aluminium content by weight of 0,3 % or more, but not more than 0,7 %, — a silicon content by weight of 0,3 % or more, but not more than 0,6 %, — a niobium content by weight of 0,1 or more, but not more than 0,3 %, and — an iron content by weight of not more than 0,2 % 0 % - 31.12.2022
0.7942 ex 8108 90 30 35 Bars and wires of titanium with a titanium content of 98,8 % or more but not more than 99,9 % of a diameter less than 20 mm 0 % - 31.12.2025
0.4904 ex 8108 90 30 45 Titanium-aluminium-vanadium alloy (TiAl6V4) wire, of a diameter less than 20 mm and complying with AMS standards 4928, 4965 or 4967 0 % - 31.12.2025
0.8105 ex 8108 90 30 55 Wires of an alloy of titanium: — with a niobium content by weight of 42 % or more but not more than 47 %, — with a diameter of not more than 6 mm, — complying with standard AMS 4982, for use in the production of aerospace fasteners (1) 0 % - 31.12.2025
0.7077 ex 8108 90 30 60 Forged cylindrical bars of titanium with: — a purity of 99,995 % by weight or more, — a diameter of 140 mm or more but not more than 200 mm, — a weight of 5 kg or more but not more than 300 kg 0 % p/st 31.12.2026
0.5351 ex 8108 90 30 70 Wire of an titanium alloy containing by weight: — 22 % (± 1 %) of vanadium, and — 4 % (± 0,5 %) of aluminium or — 15 % (± 1 %) of vanadium, — 3 % (± 0,5 %) of chromium, — 3 % (± 0,5 % of tin and — 3 % (± 0,5 %) of aluminium 0 % - 31.12.2026
0.7285 ex 8108 90 50 45 Cold or hot rolled plates, sheets and strips of non-alloyed titanium with: — a thickness of 0,4 mm or more, but not more than 100 mm, — a length of not more than 14 m, and — a width of not more than 4 m 0 % - 31.12.2022
0.5352 ex 8108 90 50 55 Plates, sheets, strip and foil of an alloy of titanium 0 % - 31.12.2026
0.6524 ex 8108 90 50 80 Plates, sheets, strips and foil of non-alloyed titanium — of a width of more than 750 mm, — of a thickness of not more than 3 mm 0 % - 31.12.2024
0.6500 ex 8108 90 50 85 Strip or foil of non-alloyed titanium: — containing more than 0,07 % by weight of oxygen (O2), — of a thickness of 0,4 mm or more but not more than 2,5 mm — conforming to the Vickers hardness HV1 standard of not more than 170 of a kind used in the manufacture of welded tubes for nuclear power plant condensers 0 % - 31.12.2024
0.5353 ex 8108 90 90 ex 9003 90 00 30 20 Parts of spectacle frames and mountings, including — temples, — blanks of a kind used for the manufacture of spectacle parts and — bolts of the kind used for spectacle frames and mountings, of a titanium alloy 0 % p/st 31.12.2026
0.2515 ex 8109 21 00 ex 8109 29 00 10 10 Non-alloy zirconium sponges or ingots, containing by weight more than 0,01 % of hafnium for use in the manufacture of tubes, bars or ingots enlarged by remelting for the chemical industry (1) 0 % - 31.12.2023
0.3415 ex 8110 10 00 10 Antimony in the form of ingots 0 % - 31.12.2023
0.3413 ex 8112 99 50 10 Alloy of niobium (columbium) and titanium, in the form of bars and rods 0 % - 31.12.2023
0.5354 ex 8113 00 20 10 Cermet blocks containing by weight 60 % or more of aluminium and 5 % or more of boron carbide 0 % - 31.12.2023
0.4316 ex 8113 00 90 10 Carrier plate of aluminium silicon carbide (AlSiC-9) for electronic circuits 0 % - 31.12.2022
0.6805 ex 8113 00 90 20 Cuboid spacer made of aluminium silicon carbide (AlSiC) composite used for packaging in IGBT-modules 0 % - 31.12.2025
0.6416 ex 8207 19 10 10 Inserts for drilling tools with working parts of agglomerated diamonds 0 % p/st 31.12.2024
0.5570 ex 8207 30 10 10 Set of transfer and/or tandem press tools for cold-forming, pressing, drawing, cutting, punching, bending, calibrating, bordering and throating of metal sheets, for use in the manufacture of frame parts or body parts of motor vehicles (1) 0 % p/st 31.12.2022
0.7693 ex 8301 20 00 10 Mechanical or electromechanical steering column lock: — with a height of 10,5 cm (± 3 cm), — with a width of 6,5 cm (± 3 cm), — in a metal housing, — whether or not with a holder, for use in the manufacture of goods of Chapter 87 (1) 0 % - 31.12.2023
0.5024 ex 8301 60 00 ex 8419 90 85 ex 8479 90 70 ex 8481 90 00 ex 8485 90 90 ex 8503 00 99 ex 8515 90 80 ex 8537 10 98 ex 8538 90 99 ex 8708 99 10 ex 8708 99 97 30 40 30 50 30 43 40 55 70 55 22 Silicone or plastic keyboards, comprising: — parts of common metal, and — whether or not comprising parts of plastic, — epoxy resin reinforced with fiberglass or wood, — whether or not printed or surface-treated, — with or without electrical conductors, — with or without a membrane bonded to the keyboard, — with or without mono or multilayer protective film 0 % p/st 31.12.2025
0.8247 ex 8302 10 00 20 Armrest hinge made of magnesium with: — a length of 255 mm or more but not more than 265 mm, — a width of 155 mm or more but not more than 165 mm, — a height of 115 mm or more but not more than 125 mm, — mounting holes for a lock mechanism 0 % - 31.12.2026
0.7666 ex 8302 30 00 10 Support bracket for an exhaust system: — with a thickness of 0,7 mm or more but not more than 1,3 mm, — of stainless steel class 1.4310 and 1.4301 according to norm EN 10088, — whether or not with mounting holes, for use in the manufacture of exhaust systems for automobiles (1) 0 % - 31.12.2023
0.8304 ex 8302 30 00 20 Two cold-formed steel supports: — with a length of 160 mm or more but not more than 180 mm, — with a width of 60 mm or more but not more than 80 mm, — with a height of 60 mm or more but not more than 80 mm, — with a movable riveted connection, — with or without elastomeric bumper, — forming a mechanism for indirect movement of the mechanism of the longitudinal positioner of car seats, interacting with the safety latch, — attached to the mechanism of the longitudinal positioner by means of a detachable screw connection, riveting, welding or spot welding 0 % - 31.12.2026
0.2602 ex 8309 90 90 10 Aluminium can ends: — with a diameter of 99,00 mm or more but not more than 136,5 mm (±1mm), — whether or not with a ‘ring-pull’ aperture 0 % p/st 31.12.2023
0.3947 ex 8401 30 00 20 Non-irradiated hexagonal fuel modules (elements) for use in nuclear reactors (1) 0 % - 31.12.2023
0.6319 ex 8401 40 00 10 Stainless steel absorber control rods, filled with neutron absorbing chemical elements 0 % p/st 31.12.2024
0.8012 ex 8406 82 00 10 Industrial steam turbine with: — an output of 5 MW or more but not more than 40 MW, — designed for a pressure of not more than 140 bar and a temperature of not more than 540 ° C, — equipped with double seat valves on the live steam side which are operated with a hydraulic servo of not more than 12 bar 0 % - 31.12.2025
0.3830 ex 8407 33 20 ex 8407 33 80 ex 8407 90 80 ex 8407 90 90 10 10 10 10 Spark-ignition reciprocating or rotary internal combustion piston engines, having a cylinder capacity of not less than 300 cm3 and a power of not less than 6 kW or more but not more than 20,0 kW, for the manufacture of: — lawn mowers of subheadings 8433 11 , 8433 19 and 8433 20 , — tractors of subheadings 8701 91 90 , 8701 92 90 whose main function is that of a lawn mower, — four stroke mowers with motor of a cylinder capacity of not less than 300 cm3 of subheading 8433 20 10 or — snowploughs and snow blowers of subheading 8430 20  (1) 0 % - 31.12.2022
0.8260 ex 8407 34 10 10 Spark-ignition reciprocating or rotary internal combustion piston engines, with: — a cylinder capacity of 1 200 cm3 or more but not more than 2 000 cm3 — a power of 95 kW but not more than 135 kW, — a weight of not more than 120 kg, for use in the manufacture of motor vehicles of 8703  (2) 0 % - 31.12.2026
0.3828 ex 8407 90 10 10 Four-stroke petrol engines of a cylinder capacity of not more than 250 cm3 for use in the manufacture of garden equipment of heading 8432 , 8433 , 8436 or 8508  (1) 0 % - 31.12.2026
0.4996 ex 8407 90 90 20 Compact Liquid Petroleum Gas (LPG) Engine System, with: — 6 cylinders, — an output of 75 kW or more, but not more than 80 kW, — inlet and exhaust valves modified to operate continuously in heavy duty applications, for use in the manufacture of vehicles of heading 8427  (1) 0 % - 31.12.2025
0.2598 ex 8408 90 41 20 Diesel engines of a power of not more than 15 kW, with 2 or 3 cylinders, for use in the manufacture of vehicle mounted temperature control systems (1) 0 % - 31.12.2023
0.2595 ex 8408 90 43 20 Diesel engines of a power of not more than 30 kW, with 4 cylinders, for use in the manufacture of vehicle mounted temperature control systems (1) 0 % - 31.12.2023
0.5544 ex 8408 90 43 ex 8408 90 45 ex 8408 90 47 40 30 50 4 Cylinder, 4 cycle, liquid cooled, compression-ignition engine having: — a capacity of not more than 3 850  cm3, and — a rated output of 15 kW or more but not more than 85 kW, for use in the manufacture of vehicles of heading 8427  (1) 0 % - 31.12.2022
0.8300 ex 8408 90 65 ex 8408 90 67 ex 8408 90 81 20 20 20 Compression-ignition internal combustion piston engines: — of the inline type, — with a cylinder capacity of 7 100  cm3 or more but not more than 18 000  cm3, — with a power of 205 kW or more but not more than 597 kW, — with an exhaust after-treatment module, — with external width/height/depth dimensions of not more than 1 310 /1 300 /1 040  mm or 2 005 /1 505 /1 300  mm or 2 005 /1 505 /1 800  mm, for use in the manufacture of crushing, screening or separation machines (2) 0 % - 31.12.2026
0.7670 ex 8409 91 00 25 Air intake module for engine cylinders consisting of: — a suction pipe, — a pressure sensor, — an electric throttle, — hoses, — brackets, for use in the manufacture of engines of motor vehicles (1) 0 % - 31.12.2023
0.8216 ex 8409 91 00 35 Fuel distribution pipe complete consisting of rail pipe, high pressure sensor and injectors for direct gasoline fuel injection with: — an operating pressure of not more than 22,5 MPa, — solenoid direct injector, — analog pressure sensor for not more than 22,5 MPa 0 % - 31.12.2026
0.7027 ex 8409 91 00 40 Fuel injector with solenoid valve for optimized atomization in the combustion chamber for use in the manufacture of spark-ignition internal combustion piston engines of motor vehicles (1) 0 % - 31.12.2026
0.7234 ex 8409 91 00 ex 8409 99 00 45 70 Metal alloy intake and exhaust valve with a Rockwell hardness HRC 20 or more, but not more than HRC 50 for use in the manufacture of spark or compression ignition engines of motor vehicles (1) 0 % - 31.12.2026
0.6752 ex 8409 91 00 ex 8409 99 00 50 55 Exhaust manifold with turbine housing of turbochargers with: — a heat-resistance of not more than 1 050  °C, and — a hole to insert a turbine wheel, whereby the hole has a diameter of 28 mm or more, but not more than 181 mm 0 % p/st 31.12.2023
0.7667 ex 8409 91 00 ex 8409 99 00 53 65 The exhaust gas recirculation assembly consisting of: — a control unit, — an air throttle, — an intake pipe, — an outlet hose, for use in the manufacture of spark-ignition or compression-ignition combustion engines of motor vehicles (1) 0 % - 31.12.2023
0.7961 ex 8409 91 00 ex 8481 90 00 55 60 Nozzle body for the regulation of angle and distribution of fuel injection: — of a cylindrical shape, — made of stainless steel, — with 4 or more, but not more than 16 holes, — with a flow rate of 100 cm3/minute or more, but not more than 500 cm3/minute 0 % - 31.12.2025
0.7661 ex 8409 91 00 70 Inlet manifold, exclusively for use in the manufacture of the motor vehicles with: — a width of 40 mm or more but not more than 70 mm, — valves length of 250 mm or more but not more than 350 mm, — air volume of 5,2 litres, and — an electrical flow control system that provides maximum performance at more than 3 200 rpm (1) 0 % - 31.12.2023
0.7965 ex 8409 91 00 75 Housing of fuel injection valve for generating an electromagnetic field to actuate the injection valve with: — an inlet diameter of 2 mm or more, but not more than 10 mm, — an outlet diameter of 2 mm or more, but not more than 10 mm, — an electric coil with a resistance of 10 Ω or more, but not more than 15 Ω, which ends in an electrical connection, — a plastic covering moulded around a stainless steel tube 0 % - 31.12.2025
0.7967 ex 8409 91 00 ex 8481 90 00 80 70 Nozzle needle for opening and closing the flow of fuel in the engine, with: — 2 holes, — 4 grooves, — a diameter of 3 mm or more, but not more than 6 mm, — a length of 25 mm or more, but not more than 35 mm, — made of stainless steel with hard-chrome plating 0 % - 31.12.2025
0.8244 ex 8409 91 00 85 Cylinder head blank for a four cylinder engine with 10 cores, made of aluminium alloy EN AC-45500, with: — no other components, — a hardness of 52 HRB or more, — casting defects size of not more than 0,4 mm and not more than 10 defects per cm2, — a dendrite arm space in combustion chamber of not more than 25 μm, — a double deck water jacket design and — a weight of 18 kg or more but not more than 19 kg, — a length of 506 mm or more but not more than 510 mm, — a height of 282 mm or more but not more than 286 mm, — a width of 143,7 mm or more but not more than 144,3 mm, in one single consignment of 1 000 pieces or more 0 % - 31.12.2026
0.5199 ex 8409 99 00 ex 8479 90 70 10 85 Injectors with solenoid valve for optimised atomisation in the engine combustion chamber 0 % p/st 31.12.2026
0.7851 ex 8409 99 00 25 Hoses assembly for fuel return from injectors to engine fuel unit consisting of at least: — three rubber hoses, whether or not with a protective braided sleeving, — three connectors for connecting fuel injectors, — five metal clamps, — one T-shaped plastic joint, for use in the manufacture of engines of motor vehicles (1) 0 % - 31.12.2024
0.7236 ex 8409 99 00 60 Intake manifold for air supply to the engine cylinders, comprising at least: — a throttle, — a boost pressure sensor for use in the manufacture of compression ignition engines of motor vehicles (1) 0 % - 31.12.2022
0.7718 ex 8409 99 00 75 High pressure fuel rail of galvanised ferrite-pearlite steel with: — at least one pressure sensor and one valve, — a length of 314 mm or more but not more than 322 mm, — an operating pressure not more than 225 MPa, — an inlet temperature not more than 95°C, — ambient temperature of -45°C or more but not more than 145°C, for use in the manufacture of compression ignition engines of motor vehicles (1) 0 % - 31.12.2024
0.7233 ex 8409 99 00 80 High pressure oil jet nozzle for engine piston cooling and lubrication with: — an opening pressure of 1 bar or more, but not more than 3 bar, — a closing pressure of more than 0,7 bar, — a one-way valve for use in the manufacture of compression ignition engines of motor vehicles (1) 0 % - 31.12.2022
0.6751 ex 8411 99 00 20 Wheel-shaped gas turbine component with blades, of a kind used in turbochargers: — of a precision-cast nickel based alloy complying with standard DIN G- NiCr13Al6MoNb or DIN G- NiCr13Al16MoNb or DIN G- NiCo10W10Cr9AlTi or DIN G- NiCr12Al6MoNb or AMS AISI:686, — with a heat-resistance of not more than 1 100  °C, — with a diameter of 28 mm or more, but not more than 180 mm, — with a height of 20 mm or more, but not more than 150 mm 0 % p/st 31.12.2022
0.7225 ex 8411 99 00 30 Turbine housing of turbochargers with: — a heat-resistance of not more than 1 050  °C, and — a hole to insert a turbine wheel, whereby the hole has a diameter of 28 mm or more, but not more than 181 mm 0 % p/st 31.12.2026
0.5975 ex 8412 39 00 20 Actuator for a single-stage turbocharger: — whether or not with conducting horns and connecting sleeves, having an operating distance of 20 mm or more but not more than 40 mm, — with a length of not more than 350 mm, — with a diameter of not more than 75 mm, — with a height of not more than 110 mm 0 % p/st 31.12.2023
0.8148 ex 8412 90 80 20 Bedplate made of solution strengthened ductile iron castings (SSDI), for anchoring and aligning the drive train (gearbox, pedestal bearing, rotor shaft) of a wind turbine with: — a length of 3,5 m or more but not more than 4,5 m, — a width of 2 m or more but not more than 4,2 m, — a height of 1 m or more, but not more than 1,3 m, — a weight of 11 tons or more but not more than 21,5 tons, — mounting bores for yawdrive, — mounting flange for gearbox support, — drivetrain mount, — different screw sockets 0 % p/st 31.12.2022
0.8079 ex 8412 90 80 30 Gearbox support used as a support and load-carrying component between the gearbox and the bedplate of a wind turbine, made of solution strengthened ductile iron castings (SSDI), with: — a diameter of 2 m or more, but not more than 5 m, — a weight of 2 tons or more but not more than 7 tons 0 % p/st 31.12.2025
0.7161 ex 8413 30 20 30 Single-cylinder radial-piston high pressure pump for gasoline direct injection with: — an operating pressure of 200 bar or more, but not more than 350 bar, — a flow control, and — a pressure relief valve, for use in the manufacture of engines of motor vehicles (1) 0 % - 31.12.2026
0.7969 ex 8413 30 20 40 High-pressure plunger pump for direct diesel injection, with: — an operating pressure of not more than 275 MPa, — a camshaft, — a fluid discharging of 15 cm3 per minute or more, but not more than 1 800 cm3 per minute, — an electric pressure regulating valve 0 % - 31.12.2025
0.7970 ex 8413 30 20 50 High-pressure plunger pump for direct diesel injection: — with an operating pressure of not more than 275 MPa, — designed to contact the crankshaft, — with an electromagnetic valve 0 % - 31.12.2025
0.8215 ex 8413 30 20 60 High-pressure plunger pump for direct petrol injection: — with an operating pressure of not more than 90 MPa, — designed to contact the crankshaft, — with an electromagnetic valve 0 % - 31.12.2026
0.8185 ex 8413 70 51 20 Electric brushless direct current motor with single-stage, radial flow pump centrifugal single entry impeller mounted on motor’s shaft and volute with integrated heater of nominal power of 1 800 W and soldered safety devices, monobloc with the motor, with: — a discharge outlet diameter of 20 mm or more, — 9 slots stator, — 6 pole rotor, — rated power of 95 W, — volute with straight outlet, — rotor chamber without sand filter 0 % - 31.12.2026
0.8186 ex 8413 70 51 30 Electric brushless direct current motor with single-stage, radial flow pump centrifugal single entry impeller mounted on motor’s shaft and volute with integrated heater of nominal power of 1 800 W and soldered safety devices, monobloc with the motor, with: — a discharge outlet diameter of 20 mm or more, — 9 slots stator, — 6 pole rotor, — rated power of 95 W, — volute with clamped rubber hose outlet, — rotor chamber without sand filter 0 % - 31.12.2026
0.8187 ex 8413 70 51 40 Electric brushless direct current motor with single-stage, radial flow pump centrifugal single entry impeller mounted on motor’s shaft, monobloc with the motor, volute with integrated heater, with: — a discharge outlet diameter of 20 mm or more, — 9 slots square or chain pole stator, — 6 pole rotor, — ferritic or rare earth magnets, — rated power of 95 W or 80 W, — heater of nominal power of 1 800 W and soldered or laser welded safety, devices, — volute with or without clamped rubber outlet, — rotor chamber with ultrasonic welded sand filter 0 % - 31.12.2026
0.6346 ex 8413 91 00 30 Fuel pump cover: — consisting of aluminium alloys, — with a diameter of 38 mm or 50 mm, — with two concentric, annular grooves formed on its surface, — anodized, of a kind used in motor vehicles with petrol engines 0 % p/st 31.12.2024
0.7669 ex 8414 10 25 30 Tandem pump consisting of: — an oil pump with displacement of 21,6 cc/rev (± 2 cc/rev) and working pressure 1,5 bar at 1 000 revolutions per minute, — vacuum pump with displacement of 120 cc/rev (± 12 cc/rev) and performance of -666 mbar in 6 seconds at 750 revolutions per minute for use in the manufacture of engines of motor vehicles (1) 0 % - 31.12.2023
0.7691 ex 8414 10 89 30 Electric vacuum pump with: — Controller Area Network (CAN bus), — whether or not with a rubber hose, — a connecting cable with connector, — a mounting bracket, for use in the manufacture of goods of Chapter 87 (1) 0 % - 31.12.2023
0.8111 ex 8414 30 20 20 Hermetic reciprocating refrigeration compressor, for isobutane: — with a 3-phase permanent magnet brushless motor, — having left side suction connection and Power Factor Correction (PFC) inverter, — with a maximum cooling capacity of 150 W or more but not more than 240 W, at ASHRAE conditions 0 % - 31.12.2025
0.8112 ex 8414 30 20 30 Hermetic reciprocating refrigeration compressor for isobutane as refrigerant: — with a 3-phase permanent magnet brushless motor, — having left side suction connection and Power Factor Correction (PFC) inverter feasible to work from 1 300 rpm up to 4 500 rpm, — with a maximum cooling capacity of 150 W or more but not more than 240 W, at ASHRAE conditions 0 % - 31.12.2025
0.8134 ex 8414 30 20 40 Hermetic reciprocating compressor, for isobutane as refrigerant with: — a Resistance Start Capacitor Run (RSCR) single phase motor, — a general coefficient of performance factor not lower than 1,93 at ASHRAE conditions, — a maximum cooling capacity of 150 W or more but not more than 180 W, at ASHRAE conditions 0 % - 31.12.2025
0.8135 ex 8414 30 20 50 Hermetic reciprocating compressor, for isobutane as refrigerant with: — a Resistance Start Capacitor Run (RSCR) single phase motor, — a general coefficient of performance factor not higher than 1,5 at ASHRAE conditions, — a maximum cooling capacity of 150 W or more but not more than 180 W, at ASHRAE conditions 0 % - 31.12.2025
0.4727 ex 8414 30 81 50 Hermetic or semi-hermetic variable-speed electric scroll compressors, with a nominal power rating of 0,5 kW or more but not more than 10 kW, with a displacement volume of not more than 35 cm3, of the type used in refrigeration equipment 0 % - 31.12.2024
0.6160 ex 8414 30 81 ex 8414 80 73 60 30 Hermetic rotary compressors for either hydrofluorocarbon (HFC) or hydrocarbon refrigerants: — driven by ‘on-off’ single phase alternate current (AC) or ‘brushless direct current’ (BLDC) variable speed motors, — with a nominal power rating of not more than 1,5 kW, — a rated voltage of 100 V or more but not more than 240 V, — with a height of not more than 300 mm, — an external diameter of not more than 150 mm, — with a unit weight of not more than 15 kg, for use in the manufacture of heat pumps for household appliances, including clothes dryers (1) 0 % - 31.12.2023
0.2593 ex 8414 30 89 20 Vehicle air conditioning system part, consisting of an open shaft reciprocating compressor of a power of more than 0,4 kW but not more than 10 kW 0 % - 31.12.2023
0.7694 ex 8414 30 89 30 Open shaft, scroll type compressor with clutch assembly, of a power of more than 0,4 kW, for air conditioning in vehicles, for use in the manufacture of motor vehicles of Chapter 87 (1) 0 % - 31.12.2023
0.7595 ex 8414 59 35 20 Radial fan, with: — a dimension of 25mm (height) x 85mm (width) x 85mm (depth), — a weight of 120 g, — a rated voltage of 13,6 VDC (direct current voltage), — an operating voltage of 9 VDC or more but not more than 16 VDC (direct current voltage), — a rated current of 1,1 A (TYP), — a rated power of 15 W, — a rotation speed of 500 RPM (revolutions per minute) or more but not more than 4 800 RPM (revolutions per minute) (free flow), — an air flow of not more than 17,5 litre/s, — an air pressure of not more than16 mm H2O ≈ 157 Pa, — an overall sound pressure of not more than 58 dB(A) at 4 800 RPM (revolutions per minute), and with a FIN (Fan Interconnect Network) interface for communication with the heating and air-conditioning control unit used in car seat ventilation systems 0 % - 31.12.2023
0.8207 ex 8414 59 35 30 Electric blower for cooling the high-voltage battery of a hybrid passenger car with: — a control unit, — MOSFET inverter, — a voltage of 9 V or more but not more than 16 V, — ambient temperature of – 40 °C or more, but not more than 80 °C, for use in the manufacture of hybrid passenger cars (1) 0 % - 31.12.2026
0.7317 ex 8414 80 22 20 Air membrane compressor with: — a flow of 4,5 l/min or more, but not more than 7 l/min, — power input of not more than 8,1 W, and — a gauge pressure capacity not exceeding 400 hPa (0,4 bar), of a kind used in the production of motor vehicle seats 0 % - 31.12.2022
0.8133 ex 8414 80 73 40 Hermetic heat pump compressor, for R134A or R450A as refrigerant: — with the Single Phase Induction Motor PSC (Permanent Split Capacitor), — having bottom side suction connection and top side discharge connection, — 8,1 cm3 or 8,2 cm3 displacement, — running at 3 000 rpm, — with a cooling capacity of 920 W or higher, but not higher than 970 W in ASHRAE conditions 0 % - 31.12.2025
0.2507 ex 8414 90 00 20 Aluminium pistons, for incorporation into compressors of air conditioning machines of motor vehicles (1) 0 % p/st 31.12.2024
0.3386 ex 8414 90 00 30 Pressure-regulating system, for incorporation into compressors of air conditioning machines of motor vehicles (1) 0 % p/st 31.12.2023
0.4027 ex 8414 90 00 40 Drive part, for compressors of air conditioning machines of motor vehicles (1) 0 % p/st 31.12.2023
0.6842 ex 8415 90 00 60 Flame-soldered aluminium block, for connecting tube with condenser in car air-conditioning systems, with: — extruded, bent connector lines of aluminium with an external diameter of 5 mm or more, but not more than 25 mm, — a weight of 0,02 kg or more but not more than 0,25 kg 0 % p/st 31.12.2025
0.6860 ex 8415 90 00 65 Aluminium arc-welded removable receiver dryer, with polyamide and ceramic elements with: — a length of 143 mm or more but not more than 292 mm, — a diameter of 31 mm or more but not more than 99 mm, — with a weight of not less than 0,12 kg and not more than 0,9 kg, — a spangle length of not more than 0,2 mm and a thickness of not more than 0,06 mm, and — a solid particle diameter of not more than 0,06 mm, for use in the manufacture of car air-conditioning systems (1) 0 % p/st 31.12.2022
0.7996 ex 8418 99 90 20 Aluminium connecting block for connecting to a condenser manifold in welding process: — hardened to T6 or T5 temper, — with a weight of not more than 150 g, — with a length of 20 mm or more but not more than 150 mm, — with a fixing rail in one piece 0 % p/st 31.12.2025
0.8004 ex 8418 99 90 30 Receiver dryer profile for connecting to a condenser manifold in welding process with: — a braze flatness of not more than 0,2 mm, — a weight of 100 g or more but not more than 600 g, — a fixing rail in one piece 0 % p/st 31.12.2025
0.6231 ex 8421 21 00 20 Water pre-treatment system comprising one or more of the following elements, whether or not incorporating modules for sterilization and sanitization of these elements: — ultrafiltration system — carbon filtration system — water softener system for use in a biopharmaceutical laboratory 0 % p/st 31.12.2024
0.3375 ex 8421 99 90 91 Parts of equipment, for the purification of water by reverse osmosis, consisting of a bundle of hollow fibres of artificial plastic material with permeable walls, embedded in a block of artificial plastic material at one end and passing through a block of artificial plastic material at the other end, whether or not housed in a cylinder 0 % p/st 31.12.2023
0.5831 ex 8431 20 00 30 Drive axle assembly containing differential, reduction gears, crown wheel, drive shafts, wheel hubs, brakes and mast mounting arms for use in the manufacture of vehicles in heading 8427  (1) 0 % p/st 31.12.2022
0.6193 ex 8431 20 00 40 Aluminium core, plastic tank radiator, with integral steel support structure and an open core square wave design of 9 fins per 2,54 cm of core length for use in the manufacture of vehicles of heading 8427  (1) 0 % p/st 31.12.2023
0.6821 ex 8436 99 00 10 Part containing: — a single-phase AC motor, — an epicyclic gearing, — a cutter blade, and whether or not containing: — a capacitor, — a part fitted with a threaded bolt, for use in the manufacture of garden shredders (1) 0 % p/st 31.12.2025
0.3374 ex 8439 99 00 10 Suction-roll shells, produced by centrifugal casting, not drilled, in the form of alloy-steel tubes, of a length of 3 000  mm or more and an external diameter of 550 mm or more 0 % p/st 31.12.2023
0.2599 ex 8477 80 99 10 Machines for casting or for surface modification of plastic membranes of heading 3921 0 % p/st 31.12.2023
0.8123 ex 8479 89 97 28 Integrated electric brake unit for immediate generation of the hydraulic pressure during braking, full electronic brake control and enabling regenerative braking of motor vehicles with: — electronic brake assistants, — hydraulic unit driven by brushless electric motor, — brake fluid reservoir, for use in the manufacture of plug-in hybrid passenger cars (1) 0 % - 31.12.2025
0.7517 ex 8479 89 97 35 Mechanical unit ensuring the movement of the camshaft with: — 6 or 8 oil chambers, — a phasing range of at least 18° but not more than 62°, — a steel and/or steel alloy sprocket, — a steel and/or steel alloy and/or aluminium alloy rotor 0 % - 31.12.2023
0.8206 ex 8479 89 97 ex 8501 31 00 38 68 Camshaft actuator for controlling the timing of valve opening by using electromotor in a continuous variable valve timing system of an internal combustion piston engine, of: — a length of 110 mm or more but not more than 140 mm, — a width of 90 mm or more but not more than 130 mm, — a height of 80 mm or more but not more than 110 mm for use in the manufacture of engines of motor vehicles (1) 0 % - 31.12.2026
0.7979 ex 8479 89 97 55 Integrated automated turnkey machinery line for manufacturing jelly rolls of cylindrical lithium ion battery cells by winding, tab assembly and cutting of cathode, separator and anode 0,8 % - 31.12.2022
0.6230 ex 8479 89 97 60 Bioreactor for biopharmaceutical cell culture — having interior surfaces of austenitic stainless steel, and — with a process capacity up to 15 000 litres, — whether or not combined with a ‘clean-in-process’ system and/or a dedicated paired media hold vessel 0 % p/st 31.12.2026
0.7982 ex 8479 89 97 65 Integrated automated turnkey machinery line for the assembly of battery cells to cylindrical lithium ion batteries with a speed of 300 parts per minute and production line 0,8 % - 31.12.2022
0.6573 ex 8479 89 97 70 Machine to accurately align and attach lenses into a camera assembly in five axis alignment capability and fix them in position with a two part cure epoxy 0 % p/st 31.12.2024
0.7964 ex 8479 90 70 40 Housing of the rotor part of the mechanical unit ensuring the adjustment of movement of the camshaft compared to the crankshaft: — of a circular shape, — made of steel alloy with sintering process, — with not more than 8 oil chambers, — with a Rockwell hardness of 55 or more, — with a density of 6,5 g/cm3, or more, but not more than 6,7 g/cm3 0 % - 31.12.2025
0.7962 ex 8479 90 70 50 Rotor part of the mechanical unit ensuring the movement of the camshaft compared to the crankshaft: — with 4 blades that end in grooves, — made of steel alloy with sintering process 0 % - 31.12.2025
0.7375 ex 8481 10 19 ex 8481 10 99 30 20 Electromagnetic pressure reducing valve — with a plunger, — with an operating pressure of not more than 325 MPa, — with a plastic connector with 2 silver or tin, or silver-plated, or tin-plated, or silver and tin plated pins 0 % - 31.12.2022
0.7424 ex 8481 10 99 40 Pressure reducing valves in a brass case with: — a length of not more than 30 mm (± 1 mm), — a width of not more than 18 mm (± 1 mm), of a kind used for incorporation in fuel delivery modules of motor vehicles 0 % - 31.12.2022
0.7968 ex 8481 30 91 ex 8481 30 99 30 50 Mechanical check (non-return) valve for opening and closing of the flow of fuel: — with an operating pressure of not more than 250 MPa, — with a flow rate of 45 cm3/minute or more, but not more than 55 cm3/minute, — with 4 input holes, each of them with a diameter of 1,2 mm or more, but not more than 1,6 mm, — made of steel 0 % - 31.12.2025
0.4668 ex 8481 30 91 91 Steel check (non-return) valves with: — an opening pressure of not more than 800 kPa, — an external diameter not more than 37 mm 0 % p/st 31.12.2024
0.7850 ex 8481 30 99 30 Brake booster check valve assembly containing at least: — three vulcanized rubber hoses, — one membrane valve, — two metal clamps, — one metal holder, — whether or not connecting metal pipe, for use in the manufacture of motor vehicles (1) 0 % - 31.12.2024
0.3363 ex 8481 80 59 10 Air control valve, consisting of a stepping motor and a valve pintle, for the regulation of idle air flow in fuel injection engines 0 % p/st 31.12.2023
0.7155 ex 8481 80 59 20 Pressure regulating valve for incorporation into compressors of motor vehicle air condition units (1) 0 % p/st 31.12.2026
0.7380 ex 8481 80 59 30 Two-way flow control valve with housing, with: — at least 5, but not more than 16 outlet holes with at least 0,05 mm, but not more than 0,5 mm diameter, — at least 330 cm3/minute, but not more than 5 000 cm3/minute flow rate, — at least 19, but not more than 300 MPa operating pressure 0 % - 31.12.2022
0.7377 ex 8481 80 59 40 Flow-control valve: — made of steel, — with an outlet hole with a diameter of 0,05 mm or more, but not more than 0,5 mm, — with an inlet hole with a diameter of 0,1 mm or more, but not more than 1,3 mm, — with chromium nitride coating, — with a surface roughness of Rp 0,4 0 % - 31.12.2022
0.7381 ex 8481 80 59 50 Electromagnetic valve for quantity control with: — a plunger, — a solenoid with a of coil resistance of at least 1,85 Ohm, but not more than 8,2 Ohm 0 % - 31.12.2022
0.7382 ex 8481 80 59 60 Electromagnetic valve for quantity control — with a solenoid with a coil resistance of at least 0,19 Ohm, but not more than 0,66 Ohm, and with an inductance of not more than 1 mH 0 % - 31.12.2022
0.7960 ex 8481 80 59 ex 8481 90 00 70 80 Flow-control valve — made of steel, — with an outlet hole with a diameter of at least 0,05 mm, but not more than 0,5 mm, — with an inlet hole with a diameter of at least 0,1 mm, but not more than 1,3 mm 0 % - 31.12.2025
0.5575 ex 8481 80 69 60 Four-way reversing valve for refrigerants, consisting of: — a solenoid pilot valve — a brass valve body including valve slider and copper connections with a working pressure up to 4,5 MPa 0 % p/st 31.12.2022
0.7519 ex 8481 80 73 ex 8481 80 99 20 70 Pressure- and flow-control valve controlled by external electromagnet: — made of steel and/or steel alloy(s), — without integrated circuit, — of not more than 1 000 kPa operating pressure, — with a flow quantity of not more than 5 l/min, — without an electromagnet 0 % - 31.12.2023
0.7637 ex 8481 80 79 ex 8481 80 99 30 30 Service Valve which suits for R410A or R32 gas while connecting indoor and outdoor units with: — a withstanding pressure of the valve body of 6,3 MPa, — a leakage ratio of less than 1,6 g/a, — an impurity ratio of less than 1,2 mg/PCS, — an airtight pressure of the valve body of 4,2 MPa, for use in the manufacture of air conditioners (1) 0 % - 31.12.2023
0.7518 ex 8481 90 00 40 Valve armature: — for the opening and closing of the flow of fuel, — consisting of a shaft and a blade, — with at least 3 but not more than 8 holes on the blade, — made of metal and/or metal alloy(s) 0 % - 31.12.2023
0.6391 ex 8482 10 10 ex 8482 10 90 ex 8482 50 00 10 10 10 Ball and cylindrical bearings: — with an outside diameter of 28 mm or more but not more than 140 mm, — with an operational thermal stress of more than 150°C at a working pressure of not more than 14 MPa, for the manufacture of machinery for the protection and control of nuclear reactors in nuclear power plants (1) 0 % p/st 31.12.2024
0.7735 ex 8482 10 10 15 Ball bearings with: — an internal diameter of 4 mm or more but not more than 9 mm, — an external diameter of not more than 26 mm, — a width of not more than 8 mm, for use in the manufacture of electromotors with a range of 40 000 rpm or more but not more than 80 000 rpm (1) 0 % - 31.12.2024
0.7707 ex 8482 10 10 ex 8482 10 90 25 40 Double row ball bearings / ball bearing cartridges: — with an internal diameter of 3 mm or more, but not more than 9 mm, — with an external diameter of 17 mm or more, but not more than 36 mm, — with a width of 6 mm or more, but not more than 69 mm, — manufactured according to ISO standard 492 - Class 5 or DIN 620 - P5 or ANSI Standard 20 - ABEC 5, — with ceramic balls, for use in turbo compressors (turbochargers) (1) 0 % - 31.12.2024
0.8098 ex 8482 50 00 20 Axial roller bearing made of steel: — the retainer is made of cold-rolled steel with a carbon content of up to 0,25 percent, complying with standard ASTM A109-98, — the rollers are made of anti-friction steel according to ASTM 295-94, — with an external diameter of 63 mm or more but not more than 66 mm, — with an internal diameter of 44 mm or more but not more than 46 mm, — with a weight of 23 g or more but not more than 27 g, — with 36 rollers or more but not more than 38 rollers 0 % p/st 31.12.2025
—————
0.5744 ex 8483 30 32 ex 8483 30 38 30 60 Bearing housing of a kind used in turbochargers: — of precision-cast grey cast iron complying with standard DIN EN 1561 or precision-cast ductile cast iron complying with DIN EN 1560, — with oil chambers, — without bearings, — with a diameter of 50 mm or more, but not more than 250 mm, — with a height of 40 mm or more, but not more than 150 mm, — whether or not with water chambers and connectors 0 % p/st 31.12.2022
0.8303 ex 8483 40 25 20 Worm gearbox — in an aluminium alloy housing, — with a plastic or steel worm, — with mounting holes, — with a 90 degree reversible drive direction, — with a 4:19 transmission ratio, — equipped with a lead screw with a length of 333 mm and a guide nut incorporated into the assembly bracket, with or without a lead screw support, for indirect connection to the drive motor of a car seat guide system (2) 0 % - 31.12.2026
0.5202 ex 8483 40 29 50 Gear set of cycloid gear type with: — a rated torque of 50 Nm or more but not more than 9 000 Nm, — standard ratios of 1:50 or more but not more than 1:475, — lost motion of not more than one arc minute, — an efficiency of more than 80 % of a kind used in robot arms 0 % p/st 31.12.2026
0.5977 ex 8483 40 29 60 Epicyclic gearing, of a kind used in driving hand-held power tools with: — a rated torque of 25 Nm or more, but not more than 70 Nm, — standard gear ratios of 1:12.7 or more, but not more than 1:64.3 0 % p/st 31.12.2023
0.2503 ex 8483 40 51 20 Gear box, having a differential with wheel axle, for use in the manufacture of self-propelled lawnmowers with a seat of subheading 8433 11 51  (1) 0 % p/st 31.12.2023
0.7920 ex 8483 40 59 30 Hydrostatic speed changer: — with a hydro pump and a differential with wheel axle, — whether or not with a fan impeller and/or a pulley, for use in the manufacture of lawn mowers of subheadings 8433 11 and 8433 19 or other mowers of subheading 8433 20  (1) 0 % p/st 31.12.2024
0.7249 ex 8483 40 90 20 Hydrostatic transmission with: — measurements (without shafts) of not more than 154 mm x 115 mm x 108 mm, — a weight of not more than 3,3 kg, — a maximum rotation speed of the input shaft of 2 700 rpm or more, but not more than 3 200 rpm, — a torque of the output shaft of not more than 10,4 Nm, — a rotation speed of the output shaft of not more than 930 rpm at 2 800  rpm input speed, and — an operating temperature range of -5 °C or more, but not more than +40 °C for use in the manufacture of hand-operated lawn mowers of subheading 8433 11 90  (1) 0 % p/st 31.12.2022
0.7248 ex 8483 40 90 30 Hydrostatic transmission with — a reduction of 20,63:1 or more, but not more than 22,68:1, — an input speed of 1 800 rpm or more when loaded and of not more than 3 000 rpm when unloaded, — a continuous output torque of 142 Nm or more, but not more than 156 Nm, — an intermittent output torque of 264 Nm or more, but not more than 291 Nm, and — an axle shaft diameter of 19,02 mm or more, but not more than 19,06 mm, — whether or not equipped with a fan impeller or with a pulley with integrated fan impeller for use in the production of self-propelled lawn mowers with a seat of subheading 8433 11 51 , and tractors of subheading 8701 91 90 , whose main function is that of a lawn mower (1) 0 % p/st 31.12.2022
0.4997 ex 8483 40 90 80 Transmission gearbox, with: — not more than 3 gears, — an automatic deceleration system, and — a power reversal system, for use in the manufacture of goods of heading 8427  (1) 0 % p/st 31.12.2025
0.8100 ex 8483 50 80 20 Pulley blocks of non-cast steel: — made of structural carbon steel complying with standard JIS G4051, — with an external diameter of 114 mm or more but not more than 118 mm, — with an internal diameter of 33 mm or more but not more than 37 mm, — with a width of 29 mm or more but not more than 33 mm, — with a weight of 0,6 kg or more but not more than 0,9 kg, — with 6 trapezoidal grooves 0 % p/st 31.12.2025
0.8209 ex 8483 90 89 20 Sprocket for continuous variable valve timing to optimize the process of filling the cylinders of an internal combustion engine with: — case, — rotor, — at least 4 screws, — spring, — of an external diameter of 80 mm or more but not exceeding 95 mm, — of a thickness of 25 mm or more but not more than 35 mm, for use in the manufacture of engines of motor vehicles (1) 0 % - 31.12.2026
0.7156 ex 8484 20 00 10 Mechanical shaft seal for incorporation into rotary compressors for use in the manufacture of motor vehicle air condition units (1) 0 % p/st 31.12.2026
0.7604 ex 8484 20 00 20 Mechanical face sealing device made of two movable rings (one ceramic mating, with a thermal conductivity lower than 80W/mK and the other carbon sliding), one spring and a nitrile sealant on the external side 0 % - 31.12.2023
0.6854 ex 8501 10 10 20 Synchronous motor for a dishwasher with a water flow control mechanism with — a length without axle of 24 mm (± 0,3), — a diameter of 49,3 mm (± 0,3), — a rated voltage of 220 V AC or more but not more than 240 V AC, — a rated frequency of 50 Hz or more but not more than 60 Hz, — an input power of not more than 4 W, — a rotation speed of 4rpm or more but not more than 4,8rpm, — an output torque of not less than 10kgf/cm 0 % - 31.12.2022
0.7601 ex 8501 10 10 30 Motors for air pumps, with: — operating voltage of 9 VDC or more but not more than 24 VDC, — operating temperature range of -40°C or more but not more than 80°C, — an output not exceeding 18 W, for use in the manufacture of pneumatic support and ventilation systems for car seats (1) 0 % - 31.12.2023
0.7857 ex 8501 10 10 40 Synchronous hybrid stepper motor with: — an output not exceeding 18 W, — two phases, — a rated current of not more than 2,5 A/phase, — a rated voltage of not more than 20 V, — with or without a threaded shaft, for use in the manufacture of 3D printers (1) 0 % - 31.12.2024
0.7197 ex 8501 10 99 56 DC Motor : — with a speed rotation of not more than 7 000  rpm (without load), — with a nominal voltage of 12 V (± 4 V), — with a maximum power of 13,78 W ( at 3,09 A), — with a specified temperature range from -40°C to 160°C, — with a gear connection, — with a mechanical attachment interface, — with 2 electrical connections, — with a maximum torque of 100 Nm 0 % - 31.12.2026
0.7198 ex 8501 10 99 58 DC Motor : — with a speed rotation of not more than 6 500  rpm (without load), — with a nominal voltage of 12 V (± 4 V), — with a maximal power below than 20 W, — with a specified temperature range from -40°C to 160°C, — with a worm gear drive, — with a mechanical attachment interface, — with 2 electrical connections, — with a maximum torque of 75 Nm 0 % - 31.12.2026
0.5846 ex 8501 10 99 60 DC motor: — with a rotor speed of 3 500  rpm or more but not more than 5 000 rpm loaded and not more than 6 500 rpm when not loaded — with a power supply voltage of 100 V or more but not more than 240 V for use in the manufacture of electric fryers (1) 0 % - 31.12.2022
0.6858 ex 8501 10 99 64 DC motor to control angular position of the flap to adjust gas flow in the Air Throttle and EGR valve: — with Ingress Protection (IP) standard of IP69, — with a rotor speed of not more than 6 500 rpm when not loaded, — with a rated voltage of 12,0 V (± 0,1), — of a specified temperature range of – 40 °C or more but not more than + 165 °C, — with or without a connecting pinion, — with or without an engine connector, — with or without a flange, — with a diameter of not more than 40 mm (not including the flange), — with an overall height of not more than 90 mm (from the base to the pinion) 0 % - 31.12.2026
0.6880 ex 8501 10 99 65 Electric turbocharger actuator, with: — a DC motor, — an integrated gear mechanism, — a (pulling)force of 200 N or more at a minimum of 140°C elevated ambient temperature, — a (pulling) force of 250 N or more in each position of its stroke, — an effective stroke of 15 mm or more but not more than 25 mm, — with or without an on-board diagnostics interface 0 % - 31.12.2025
0.6115 ex 8501 10 99 70 DC stepping motor, with: — a two-phase winding, — a rated voltage of 9 V or more, but not more than 16,0 V, — of a specified temperature range of - 40 °C or more but not more than + 105 °C, — with or without connection pinion, — with or without motor drive connector 0 % - 31.12.2023
0.6627 ex 8501 10 99 75 Permanently excited DC motor with — a multiple-phase winding, — an external diameter of 28 mm or more but not more than 35 mm, — a rated speed of not more than 12 000 rpm, — a power supply voltage of 8 V or more but not more than 27 V 0 % - 31.12.2025
0.2838 ex 8501 10 99 79 DC motor with brushes and an internal rotor with a three-phase winding, whether or not equipped with a worm, of a specified temperature range covering at least - 20 °C to + 70 °C 0 % - 31.12.2023
0.4555 ex 8501 10 99 80 DC stepping motor, with: — an angle of step of 7,5° (± 0,5°), — a pull-out torque at 25 °C of 25 mNm or more, — a pull-out pulse rate of 1 500  pps or more, — a two-phase winding, and — a rated voltage of 10,5 V or more, but not more than 16,0 V 0 % - 31.12.2023
0.7250 ex 8501 20 00 30 Universal AC/DC motor with — a rated output of 1,2 kW, — a supply voltage of 230 V, and — engine brake, — assembled to a reduction gear with output shaft, which is contained in a plastic housing for use as electric drive of lawnmower blades (1) 0 % - 31.12.2022
0.5954 ex 8501 31 00 45 DC motors, brushless, with: — an external diameter of 90 mm or more, but not more than 110 mm, — a rated speed of not more than 3 680  rpm, — an output of 600 W or more but not more than 740 W at 2 300  rpm and at 80 °C, — a supply voltage of 12 V, — a torque of not more than 5,67 Nm, — a rotor position sensor, — an electronic star-point relay, and — for use with an electric power steering control module 0 % - 31.12.2023
0.5577 ex 8501 31 00 50 DC motors, brushless, with: — an external diameter of 80 mm or more, but not more than 200 mm, — a supply voltage of 9 V or more, but not more than 16 V, — an output at 20 °C of 300 W or more, but not more than 750 W, — a torque at 20 °C of 2,00 Nm or more, but not more than 7,00 Nm, — a rated speed at 20 °C of 600 rpm or more, but not more than 3 100 rpm, — with or without a pulley, — with or without an electronic power steering sensor/controller 0 % - 31.12.2022
0.5978 ex 8501 31 00 ex 8501 32 00 55 40 DC motor with or without commutator, with — an external diameter of 24,2 mm or more, but not more than 140 mm, — a rated speed of 3 300 rpm or more, but not more than 26 200 rpm, — a rated supply voltage of 3,6 V or more, but not more than 230 V, — an output power of more than 37,5 W , but not more than 2 400 W, — a free load current of not more than 20,1 A, — a maximum efficiency of 50 % or more, for driving hand-held power tools or lawn mowers 0 % - 31.12.2023
0.4731 ex 8501 31 00 58 Permanently excited DC motor with: — an external diameter of 30 mm or more but not more than 90 mm, including mounting flange, — a rated speed of not more than 15 000 rpm, — an output of 45 W or more but not more than 400 W, and — a supply voltage of 9 V or more but not more than 50 V, — whether or not a multiple-phase winding, — whether or not with a drive disc, — whether or not with a crankcase, — whether or not with a fan, — whether or not with a cap assembly, — whether or not with a sun gear, — whether or not with a speed and rotational direction encoder, — whether or not with or without a speed or rotational direction sensor of resolver type or Hall effect type, — whether or not with a mounting flange 0 % - 31.12.2024
0.6809 ex 8501 31 00 ex 8501 32 00 63 65 Ready for installation in vehicles or equipment of headings 8432 and 8433 , brushless and permanently excited direct current motor with: — a specified speed of not more than 4 100 rpm, — a minimum output of 400 W, but not more than 1,3 kW (at 12 V), or with a minimum output of 750 W but not more than 1,55 kW (at 36 V), — a flange diameter of 85 mm or more but not more than 200 mm, — a maximum length of 335 mm, measured from the beginning of the shaft to the outer ending, — a housing length of not more than 265 mm, measured from the flange to the outer ending, — a maximum of two-piece (basic housing including electric components and flange with minimum 2 and maximum 11 bore holes) aluminium diecast or sheet steel housing whether or not with a sealing compound (groove with an O-ring and grease), 0 % - 31.12.2025
— a stator with single T-tooth design and single coil windings in 9/6 or 12/8 topology, and — surface magnets, — whether or not with electronic power steering controller, — whether or not with pulley, — whether or not with rotor position sensor
0.4855 ex 8501 33 00 ex 8501 40 80 ex 8501 53 50 30 50 10 Electric drive for motor vehicles, with an output of not more than 315 kW: — with an AC or DC motor with or without transmission, — with or without power electronics 0 % - 31.12.2026
0.8188 ex 8501 40 20 35 Electric AC motor, single-phase, with: — a rated power of 120 W or more but not more than 150 W, — an input power of 280 W or more but not more than 350 W, — an external diameter without bracket connector and pulley of 145 mm or more but not more than 160 mm, — a rated speed of 2 680 rpm or more but not more than 3 000 rpm, — a weight of 4,2 kg or more but not more than 4,6 kg, — pulleys, a spindle and a tachometer, for use in the manufacture of home appliance products (1) 0 % - 31.12.2026
0.8189 ex 8501 40 20 45 Electric AC motor, single-phase, with: — a rated power of 275 W or more, but not more than 325 W, — an input power of 600 W or more but not more than 700 W, — an external diameter without bracket and connector of 150 mm or more but not more than 170 mm, — a rated speed of 15 000 rpm or more but not more than 20 000 rpm, — a weight of 4,2 kg or more, — a pulley and a tachometer, for use in the manufacture of home appliance products (1) 0 % - 31.12.2026
0.8191 ex 8501 40 20 50 Electric AC motor, single-phase, with: — a rated power of 300 W or more but not more than 370 W, — an input power of 600 W or more but not more than 700 W, — an external diameter without bracket and connector of 150 mm or more but not more than 170 mm, — a rated speed of 15 000 rpm or more but not more than 19 000 rpm, — a weight of 4,8 kg or more, — a pulley, for use in the manufacture of home appliance products (1) 0 % - 31.12.2026
0.8192 ex 8501 40 20 55 Electric AC motor, single-phase, with: — a rated power of 275 W or more, but not more than 325 W, — an input power of 600 W or more but not more than 700 W, — an external diameter without bracket and connector of 160 mm or more but not more than 180 mm, — a rated speed of 15 000 rpm or more but not more than 19 000 rpm, — a weight of not more than 4,4 kg, — a pulley, for use in the manufacture of home appliance products (1) 0 % - 31.12.2026
0.8193 ex 8501 40 20 60 Electric AC motor, single-phase, with: — a rated power of 275 W or more but not more than 325 W, — an output power of 550 W or more but not more than 600 W, — an input power of 800 W or more but not more than 1 000 W, — an external diameter of more than 150 mm but not more than 170 mm without the bracket, — a rated speed of more than 16 000 rpm but not more than 18 000 rpm, — a weight of 3,4 kg or more but not more than 3,7 kg, — a pulley, for use in the manufacture of home appliance products (1) 0 % - 31.12.2026
0.5329 ex 8501 51 00 ex 8501 52 20 30 50 AC synchronous servo motor with resolver and brake for a maximum speed of not more than 6 000 rpm, with: — an output of 340 W or more but not more than 7,4 kW, — a flange of dimensions of not more than 180 mm × 180 mm, and — a length from flange to extreme end of resolver of not more than 271 mm 0 % - 31.12.2026
0.8190 ex 8501 51 00 40 Electric AC motor, three-phase, with: — a rated power of 280 W or more but not more than 320 W, — an output power of 480 W or more but not more than 540 W, — an input power of 800 W or more but not more than 900 W, — an external diameter of 150 mm or more but not more than 170 mm, — a rated speed of 15 000 rpm or more but not more than 20 000 rpm, — a weight of 6 kg or more but not more than 6,4 kg, — a pulley and a tachometer, for use in the manufacture of home appliance products (1) 0 % - 31.12.2026
0.6511 ex 8501 53 50 20 AC traction motor of the Interior Permanent Magnet Synchronous Motor (IPMSM) type with: — a torque output of 200 Nm or more, but not more than 400 Nm, — a power output of 50 kW or more, but not more than 200 kW , — a rotation speed of no more than 15 000 rpm, for use in the manufacture of electric vehicles (1) 0 % - 31.12.2024
0.8129 ex 8501 53 50 30 Permanent magnet synchronous traction motor, with: — a continuous power of 110 kW or more but not more than 180 kW, — a liquid cooled system, — a total length of 500 mm or more but not more than 650 mm, — a total width of 600 mm or more but not more than 700 mm, — a total height of 550 mm or more but not more than 650 mm, — weighing of not more than 350 kg, — 3 suspension points 0 % - 31.12.2025
0.8285 ex 8501 53 50 40 Permanent magnet traction AC motor, with: — a continuous power of 110 kW or more but not more than 150 kW, — a liquid cooled system, — a total length of 460 mm or more but not more than 590 mm, — a total width of 450 mm or more but not more than 580 mm, — a total height of 490 mm or more but not more than 590 mm, — a weight of not more than 310 kg, — 4 mounting points 0 % - 31.12.2026
0.5633 ex 8501 62 00 30 Fuel cell system — consisting of at least phosphoric acid fuel cells, — in a housing with integrated water management and gas treatment, — for permanent, stationary energy supply 0 % - 31.12.2022
0.8130 ex 8501 62 00 40 AC, 3-phase generator, with: — a continuous power of 147 kVA or more but not more than 222 kVA, — a continuous torque of 650 Nm or more but not more than 900 Nm, — a maximum working speed of 2 700 revolutions per minute (rpm), — a liquid cooled system, — a length of 100 mm or more but not more than 200 mm, — a width of 550 mm or more but not more than 650 mm, — a height of 550 mm or more but not more than 650 mm, — weighing of not more than 150 kg 0 % - 31.12.2025
0.2837 ex 8503 00 91 ex 8503 00 99 31 32 Rotor, at the inner side provided with one or two magnetic rings (uniform or sectional) whether or not incorporated in a steel ring or bearing mounted in steel housing 0 % p/st 31.12.2023
0.2836 ex 8503 00 99 31 Stamped collector of an electric motor, having an external diameter of not more than 16 mm 0 % p/st 31.12.2023
0.4599 ex 8503 00 99 33 Stator for brushless motor of electrical power steering with a roundness tolerance of 50 μm 0 % p/st 31.12.2026
0.4601 ex 8503 00 99 34 Rotor for brushless motor of electrical power steering with a roundness tolerance of 50 μm 0 % p/st 31.12.2024
0.7496 ex 8503 00 99 37 Rotor for an electric motor, with the rotor cylindrical body made of agglomerated ferrite and plastics and the shaft made of metal with: — diameter of the rotor body of 17 mm or more but not more than 37 mm, — length of the rotor body of 12 mm or more but not more than 36 mm, — shaft length of 52 mm or more but not more than 82 mm 0 % - 31.12.2023
0.5783 ex 8503 00 99 40 Fuel cell membrane, in rolls or sheets, with a width of not more than 150 cm, for use in the manufacture of fuel cells in Heading 8501  (1) 0 % p/st 31.12.2022
0.6161 ex 8503 00 99 55 Stator for brushless motor, with: — an internal diameter of 206,6 mm (± 0,5), — an external diameter of 265,0 mm (± 0,2), and — a width of 37,2 mm or more but not more than 47,8 mm, of a kind used in the manufacture of washing machine, washer-dryer or dryer equipped with direct drive drums 0 % p/st 31.12.2025
0.6379 ex 8503 00 99 60 Engine cover for electronic belt drive steering system of galvanized steel with a thickness of not more than 2,5 mm (± 0,25 mm) 0 % p/st 31.12.2024
0.7760 ex 8503 00 99 65 Rotor body of stacked electrical sheet having: — a diameter of 18 mm or more but not more than 35 mm, and — a length of 20 mm or more but not more than 65 mm 0 % - 31.12.2024
0.7761 ex 8503 00 99 75 Stator body of stacked electrical sheet having: — an inner diameter of 18 mm or more but not more than 35 mm, — an outer diameter of 35 mm or more but not more than 65 mm, and — a length of 20 mm or more but not more than 65 mm, — whether or not incorporated in a housing 0 % - 31.12.2024
0.7758 ex 8503 00 99 80 Steel motor housing having: — an inner diameter of 35 mm or more but not more than 65 mm, — an outer diameter of 35 mm or more but not more than 70 mm, and — a length of 35 mm or more but not more than 150 mm 0 % - 31.12.2024
0.7549 ex 8504 31 80 15 Electrical Transformer with — a capacity of 192 Watts or 216 Watts — dimensions of not more than 27,1 x 26,6 x 18 mm — an operating temperature range of – 40 °C or more, but not more than + 125 °C — three or four inductively coupled copper wire windings and — 9 connection pins at the bottom 0 % - 31.12.2023
0.7548 ex 8504 31 80 25 Electrical Transformer with — a capacity of 432 Watts — dimensions of not more than 24 mm x 21 mm x19 mm — an operating temperature range of – 20 °C or more, but not more than + 85 °C — two windings and — 5 connection pins at the bottom 0 % - 31.12.2023
0.4450 ex 8504 31 80 30 Switching transformers, having a power handling capacity of not more than 1 kVA for use in the manufacture of static converters (1) 0 % - 31.12.2023
0.7547 ex 8504 31 80 35 Electrical Transformer with — a capacity of 433 Watts — dimensions of not more than 37,3 x 38,2 x 28,5 mm — an operating temperature range of – 40 °C or more, but not more than + 125 °C — four inductively coupled copper wire windings and — 13 connection pins at the bottom 0 % - 31.12.2023
0.5598 ex 8504 31 80 40 Electrical transformers: — with a capacity of 1 kVA or less — without plugs or cables, for internal use in the manufacture of set top boxes and TVs (1) 0 % - 31.12.2022
0.7551 ex 8504 31 80 45 Electrical Transformer with: — a capacity of 0,2 Watts, — dimensions of not more than 15 mm x 15,5 mm x 14 mm, — an operating temperature range of – 10 °C or more, but not more than + 125 °C, — two inductively coupled copper wire windings, — 5 connection pins at the bottom, and — a copper shielding 0 % - 31.12.2023
0.7000 ex 8504 31 80 50 Transformers for use in the manufacture of electronic drivers, control devices and LED light sources for lighting industry (1) 0 % - 31.12.2026
0.7764 ex 8504 31 80 55 Electrical transformer with: — a capacity of 0,22 kVA or more, but not more than 0,24 kVA, — an operating temperature range of + 10°C or more, but not more than + 125°C, — four or five inductively coupled copper wire windings, — 11 or 12 connection pins at the bottom, and — dimensions of not more than 32 mm x 37,8 mm x 25,8 mm 0 % - 31.12.2024
0.7029 ex 8505 11 00 47 Articles in the form of a triangle, square, rectangle, or trapezoid, whether or not arched, with rounded corners or oblique sides, intended to become permanent magnets after magnetisation, containing neodymium, iron and boron, with the following dimensions: — a length of 9 mm or more but not more than 105 mm, — a width of 5 mm or more but not more than 105 mm, and — a height of 2 mm or more but not more than 55 mm 0 % - 31.12.2026
0.5584 ex 8505 11 00 50 Bars specifically shaped, intended to become permanent magnets after magnetisation, containing neodymium, iron and boron, with dimensions: — a length of 15 mm or more but not more than 52 mm, — a width of 5 mm or more but not more than 42 mm, of a kind to be used in the manufacture of electric servomotors for industrial automation 0 % p/st 31.12.2022
0.7567 ex 8505 11 00 53 Permanent magnets of a neodymium alloy cylindrical shaped with notch with internal threaded bore on one side, with — a length of 97,5 mm or more, but not more than 225 mm — a diameter of 19 mm or more, but not more than 25 mm 0 % - 31.12.2023
0.5585 ex 8505 11 00 63 Rings, tubes, bushings or collars made from an alloy of neodymium, iron and boron, with — an external diameter of not more than 45 mm, — a height of not more than 45 mm, of a kind used in the manufacture of permanent magnets after magnetisation 0 % p/st 31.12.2022
0.3740 ex 8505 11 00 65 Permanent magnets consisting of an alloy of neodymium, iron and boron, either in the shape of a rectangle, whether or not rounded, with a rectangular or a trapezoidal section having — a length of not more than 140 mm, — a width of not more than 90 mm and — a thickness of not more than 55 mm, or in the shape of curved rectangle (tile type) having — a length of not more than 75 mm, — a width of not more than 40 mm, 0 % p/st 31.12.2023
— a thickness of not more than 7 mm and — a radius of curvature of more than 86 mm but not more than 241 mm or in the shape of a disc with a diameter of not more than 90 mm, whether or not containing a hole in the centre
0.7788 ex 8505 11 00 68 Blocks made of neodymium, iron and boron or an alloy of samarium and cobalt, whether or not covered with zinc, intended to become permanent magnets after magnetisation with: — a length of 13,8 mm or more but not more than 45,2 mm, — a width of 7,8 mm or more but not more than 25,2 mm, — a height of 1,3 mm or more but not more than 4,7 mm 0 % - 31.12.2024
0.5948 ex 8505 11 00 70 Disc consisting of an alloy of neodymium, iron and boron, covered with nickel or zinc, that after magnetisation is intended to become a permanent magnet — whether or not containing a hole in the centre, — with a diameter of not more than 90 mm, of a kind used in car loudspeakers 0 % - 31.12.2023
0.6857 ex 8505 11 00 ex 8505 19 90 73 35 Articles in shape of flat bars, arched bars or quarter sleeves, made of ferrite, or cobalt, or samarium or other rare-earth metals, or their alloy, whether or not overmolded with polymers, intended to become permanent magnets after magnetisation with: — a length of 5 mm or more, but not more than 60 mm, — a width of 5 mm or more, but not more than 40 mm, — a thickness of 3 mm or more, but not more than 15 mm 0 % p/st 31.12.2022
0.6347 ex 8505 11 00 75 A quarter sleeve intended to become permanent magnet after magnetization, — consisting of at least neodymium, iron and boron, — with a width of 9,1 mm or more but not more than 10,5 mm, — with a length of 20 mm or more but not more than 30,1 mm, of a kind used on rotors for the manufacture of fuel pumps 0 % p/st 31.12.2024
0.7789 ex 8505 19 10 20 Arc segments of permanent magnets of agglomerated ferrite, with: — a length of 16,8 mm or more, but not more than 110,2 mm, — a width of 14,8 mm or more, but not more than 75,2 mm, — a thickness of 4,8 mm or more, but not more than 13,2 mm, for use in the manufacture of electromotor rotors for ventilation and air-conditioning systems (1) 0 % - 31.12.2024
0.5937 ex 8505 19 90 30 Articles of agglomerated ferrite in the shape of a disc with a diameter of not more than 120 mm, containing a hole in the centre intended to become permanent magnets after magnetisation with a remanence between245 mT and 470 mT 0 % - 31.12.2023
0.7299 ex 8505 19 90 50 Article of agglomerated ferrite in the shape of a rectangular prism to become a permanent magnet after magnetisation — whether or not with bevelled edges — of a length of 27 mm or more but not more than 32 mm (± 0,15 mm), — of a width of 8,5 mm or more but not more than 9,5 mm — (+0,05 mm / -0,09 mm), — of a thickness of 5,5 mm or more but not more than 5,8 mm — (+0/-0,2 mm), and — of a weight of 6,1 g or more but not more than 8,3 g 0 % p/st 31.12.2022
0.7511 ex 8505 19 90 60 Articles of agglomerated ferrite in the shape of a half-sleeve or a quarter-sleeve, or with rounded corners, to intended to become permanent magnet after magnetisation with the following dimentions: — a length of 10 mm or more but not more than 100 mm (± 1 mm), — a width of 10 mm or more but not more than 100 mm (± 1 mm), — a thickness of 2 mm or more but not more than 15 mm (± 0,15 mm) 0 % - 31.12.2023
0.4029 ex 8505 20 00 30 Electromagnetic clutch, for use in the manufacture of compressors of air conditioning machines of motor vehicles (1) 0 % p/st 31.12.2023
0.8095 ex 8505 90 90 20 Electromagnetic clutch coil in a cylindrical metal housing: — the metal housing is made of hot-rolled steel complying with standard JIS G 3131 - SPHE, — the coil is made of copper wire, — with a weight of 0,4 kg or more but not more than 0,7 kg, — with a width of 22 mm or more but not more than 25 mm, — with a plate reinforced to the coil (coil backplate) with an internal diameter of 44 mm or more but not more than 46 mm, — with an external diameter of 88 mm or more but not more than 96 mm, — without plunger, — with one connector 0 % p/st 31.12.2025
0.6855 ex 8506 50 10 10 Lithium cylindrical primary cells with: — a diameter of 14,0 mm or more but not more than 26,0 mm, — a length of 2,2 mm or more but not more than 51 mm, — a voltage of 1,5 V or more, but not more than 3,6 V, — a capacity of 0,15 Ah or more, but not more than 5,00 Ah for use in the manufacture of telemetry and medical devices, electronic meters or remote controls (1) 0 % - 31.12.2023
0.7416 ex 8506 50 30 10 Lithium manganese dioxide cell, with: — a diameter of 20 mm or more but not more than 25 mm — a length of 3 mm or more but not more than 6 mm — a voltage of 3 V or more but not more than 3,4 V — a capacity of 200 mAh or more but not more than 600 mAh — an automotive test temperature range from -40°C to +125°C for use as a component within the manufacture of Tyre Pressure Measuring Systems (TPMS) (1) 0 % - 31.12.2022
0.2490 ex 8506 50 90 10 Lithium iodine single cell battery the dimensions of which do not exceed 9 mm × 23 mm × 45 mm and a voltage of not more than 2,8 V 0 % - 31.12.2023
0.2488 ex 8506 50 90 30 Lithium-iodine or lithium-silver vanadium oxide single cell battery of dimensions of not more than 28 mm × 45 mm × 15 mm and a capacity of not less than 1,05 Ah 0 % - 31.12.2023
0.5180 ex 8506 90 00 10 Cathode, in rolls, for air zinc button cell batteries (hearing aid batteries) (1) 0 % - 31.12.2023
0.6685 ex 8507 60 00 15 Cylindrical lithium-ion-accumulators or modules with: — a nominal capacity of 8,8 Ah or more, but not more than 18 Ah, — a nominal voltage of 36 V or more, but not more than 48 V, — a power of 300 Wh or more, but not more than 648 Wh, for use in the manufacture of electric bicycles (1) 1,3 % - 31.12.2022
0.6625 ex 8507 60 00 17 Lithium-ion starter accumulator, consisting of four rechargeable lithium-ion secondary cells, with: — a rated voltage of 12 V, — a length of 350 mm or more but not more than 355 mm, — a width of 170 mm or more but not more than 180 mm, — a height of 180 mm or more but not more than 195 mm, — weighing 10 kg or more but not more than 15 kg, — a nominal charge of 60 Ah or more, but not more than 80 Ah 1,3 % - 31.12.2022
0.7663 ex 8507 60 00 18 Lithium-ion polymer accumulator equipped with a battery management system and can-bus interface with: — a length of not more than 1 600  mm, — a width of not more than 448 mm, — a height of not more than 395 mm, — a nominal voltage of 280 V or more but not more than 400 V, — a nominal capacity of 9,7 Ah or more but not more than 10,35 Ah, — a charging voltage of 110 V or more but not more than 230 V, and — containing 6 modules with 90 cells or more but not more than 96 cells enclosed in a steel casing, for use in the manufacture of vehicle capable of being charged by plugging to external source of electric power of heading 8703  (1) 1,3 % - 31.12.2022
0.7717 ex 8507 60 00 22 Integrated battery system in a metal case with holders, consisting of: — a lithium-ion battery with voltage of 48 V (± 5 V) and capacity of 0,44 kWh (± 0,05 kWh), — Battery Management System, — a relay, — a low voltage converter (DC/DC), — at least one connector, for use in the manufacture of hybrid motor vehicles (1) 1,3 % - 31.12.2022
0.2907 ex 8507 60 00 30 Cylindrical lithium-ion accumulator or module, with a length of 63 mm or more and a diameter of 17,2 mm or more, having a nominal capacity of 1 200 mAh or more, for use in the manufacture of rechargeable batteries (1) 1,3 % - 31.12.2022
0.6703 ex 8507 60 00 33 Lithium-ion accumulator, with: — a length of 150 mm or more, but not more than 1 000  mm, — a width of 100 mm or more, but not more than 1 000  mm, — a height of 200 mm or more, but not more than 1 500  mm, — a weight of 75 kg or more, but not more than 200 kg, — a nominal capacity not less than 150Ah and not more than 500 Ah, — a nominal output voltage of 230V AC (Line to neutral) or a nominal voltage of 64V (±10 %) 1,3 % - 31.12.2022
0.6702 ex 8507 60 00 37 Lithium-ion accumulator, with: — a length of 1 200  mm or more, but not more than 2 000  mm, — a width of 800 mm or more, but not more than 1 300  mm, — a height of 2 000  mm or more, but not more than 2 800  mm, — a weight of 1 800  kg or more, but not more than 3 000  kg, — a nominal capacity of 2 800 Ah or more but not more than 7 200 Ah 1,3 % - 31.12.2022
0.8115 ex 8507 60 00 48 Integrated battery system in a metal case with holders, consisting of: — a lithium-ion battery with a voltage of 36 V or more but not more than 50,4 V and a nominal energy of 0,6 kWh, — Battery Management System, — a power relay, — a cooling system, — four connectors, for use in the manufacture of Mild-hybrid (mHEV) motor vehicles (1) 1,3 % - 31.12.2022
0.5548 ex 8507 60 00 50 Modules for the assembly of batteries of ion lithium electric accumulators with: — a length of 298 mm or more, but not more than 500 mm, — a width of 33,5 mm or more, but not more than 209 mm, — a height of 75 mm or more, but not more than 228 mm, — a weight of 3,6 kg or more, but not more than 17 kg, and — a power of 458 Wh or more, but not more than 2 900  Wh 1,3 % - 31.12.2022
0.7641 ex 8507 60 00 58 Prismatic lithium-ion electric accumulator with: — a width of 120,0 mm or more but not more than 305,0 mm, — a thickness of 12,0 mm or more but not more than 67,0 mm, — a height of 72,0 mm or more but not more than 126,0 mm, — a nominal voltage of 3,6 V or more but not more than 3,75 V, and — a nominal capacity of 6,9 Ah or more not more than 265 Ah, for use in the manufacture of rechargeable electric vehicle batteries (1) 1,3 % - 31.12.2022
0.5342 ex 8507 60 00 65 Cylindrical lithium ion cell with — a nominal diameter of 9,8 mm or more, but not more than 14,5 mm, — a nominal voltage of 3,0 VDC or more, but not more than 4,0 VDC, and — a nominal capacity of 200 mAh or more, but not more than 1 200 mAh 1,3 % - 31.12.2022
0.7888 ex 8507 60 00 68 Lithium-ion accumulator in a metal housing, with — a length of 65 mm or more, but not more than 225 mm, — a width of 10 mm or more, but not more than 75 mm, — a height of 60 mm or more, but not more than 285 mm, — a nominal voltage of 2,1 V or more, but not more than 3,8 V, and — a nominal capacity of 2,5 Ah or more, but not more than 325 Ah 1,3 % - 31.12.2022
0.8259 ex 8507 60 00 73 Lithium-ion Electric accumulators consisting of 3 modules containing 102 cells in total, with: — a nominal capacity of 51 Ah per cell, — a nominal voltage of 285 V or more but not more than 426V, — a weight of 33 kg or more but not more than 36 kg per module, — a length of 1 400 mm or more but not more than 1 600 mm, — a height of 340 mm or more but not more than 395 mm, — a width of 220 mm or more but not more than 420 mm, for use in the manufacture of vehicles of subheadings 8703 60 and 8703 80  (2) 1,3 % - 31.12.2022
0.5356 ex 8507 60 00 75 Rectangular lithium-ion-accumulator with: — a metal casing, — a length of 147,85 mm or more but not more than 173,15 mm, — a width of 17,4 mm or more but not more than 21,1 mm, — a height of 90,85 mm or more but not more than 95,15 mm, — a nominal voltage of 3,3 V or more but not more than 3,65 V, and — a nominal capacity of 17,5 Ah or more 1,3 % - 31.12.2022
0.6753 ex 8507 60 00 77 Lithium-ion rechargeable batteries, with: — a length of 700 mm or more, but not more than 2 820  mm, — a width of 935 mm or more, but not more than 1 660  mm, — a height of 85 mm or more, but not more than 700 mm, — a weight of 250 kg or more, but not more than 700 kg, — a power of not more than 175 kWh, — a nominal voltage of 400 V 1.3 % - 31.12.2022
0.8275 ex 8507 60 00 83 Modules for the assembly of ion lithium electric accumulators with: — a length of 570 mm or more, but not more than 610 mm, — a width of 210 mm or more, but not more than 240 mm, — a height of 100 mm or more, but not more than 120 mm, — a weight of 28 kg or more, but not more than 35 kg, and — a capacity of not more than 2 500 Ah and a nominal energy of less than 7,5 kW, for use in the manufacture of vehicles of subheadings 8703 60 , 8703 70 , 8703 80 and 8704 60  (2) 1,3 % - 31.12.2022
0.8286 ex 8507 60 00 88 A rechargeable lithium-ion battery, with: — a fuse, — a cell-to-pack design, — a length of 1 050 mm or more but not more than 1 070 mm, — a width of 624 mm or more but not more than 636 mm, — a height of 235 mm or more but not more than 245 mm, — a mass of 214,4 kg or more but not more than 227,6 kg, — a capacity of 228 Ah, — an upper outer casing of a composite material, — an IP68 protection rating, — an energy density of 220Wh/l or more, — a specific energy of 159 Wh/kg or more, — without contactors, for the manufacture of batteries for electric buses (2) 1,3 % - 31.12.2022
0.5014 ex 8508 70 00 ex 8537 10 98 20 98 Electronic circuit cards that: — are connected by wire or radio frequency to each other and the motor controller card, and — regulate the functioning (switching on or off and suction capacity) of vacuum cleaners according to a stored program, — whether or not fitted with indicators that display the functioning of the vacuum cleaner (suction capacity and/or dust bag full and/or filter full) 0 % p/st 31.12.2025
0.6304 ex 8511 30 00 30 Igniter integrated coil assembly with: — an igniter, — a coil on plug assembly with an integrated mounting bracket, — a housing, — a length of 90 mm or more but not more than 200 mm (± 5 mm), — an operating temperature of -40 °C or more but not more than 130 °C, — a voltage of 10,5 V or more, but not more than 16 V 0 % p/st 31.12.2024
0.7024 ex 8511 30 00 55 Ignition coil: — with a length of 50 mm or more, but not more than 200 mm, — with an operating temperature of – 40 °C or more, but not more than 140 °C, and — with a voltage of 9 V or more, but not more than 16 V, — with or without connection cable, for use in the manufacture of engines of motor vehicles (1) 0 % - 31.12.2026
0.6856 ex 8512 20 00 30 Lighting module, containing at least: — two LEDs, — glass or plastic lenses, focusing/scattering the light emitted by the LEDs, — reflectors redirecting the light emitted by the LEDs, in an aluminium housing with a radiator, mounted at a bracket with an actuator 0 % p/st 31.12.2025
0.6503 ex 8512 20 00 40 Fog lamp with a galvanised inner surface, containing: — a plastic holder with three or more brackets, — one or more 12 V bulbs, — a connector, — a plastic cover, — whether or not with a connection cable for use in the manufacture of goods of Chapter 87 (1) 0 % p/st 31.12.2024
0.6562 ex 8512 20 00 60 Information screen displaying: — at least time, date and status of safety features in a vehicle, or — safety information on driving in the lane, blind spot, distance from the vehicle in front, current speed, speed limit, with an operating voltage of 12 V or more but not more than 14,4 V, of a kind used in the manufacturing of goods of Chapter 87 0 % p/st 31.12.2024
0.6504 ex 8512 30 90 10 Horn assembly operating on piezomechanical principle for generating a specific sound signal, with a voltage of 12 V, comprising: — coil, — magnet, — metal membrane, — connector, — holder of a kind used in the manufacture of goods of Chapter 87 0 % p/st 31.12.2024
0.6863 ex 8512 30 90 20 Warning buzzer for parking sensor system in a plastic casing operating on the piezo-mechanic principle, containing: — a printed circuit board, — a connector, — whether or not a metal holder, for use in the manufacture of goods of chapter 87 (1) 0 % p/st 31.12.2022
0.7361 ex 8512 30 90 30 Sound alarm device for protection against burglary into the vehicle: — with an operating temperature of – 45 °C or more, but not more than + 95 °C, — with a voltage of 9 V or more but not more than 16 V, — in a plastic housing, — whether or not with a metal holder for use in the manufacture of motor vehicles (1) 0 % - 31.12.2022
0.5983 ex 8512 40 00 ex 8516 80 20 10 20 Car door mirror heating foil: — with two electrical contacts, — with an adhesive layer on both sides (on the side of the plastic holder of the mirror and on the side of the mirror glass), — with a protective paper film on both sides 0 % - 31.12.2023
0.6522 ex 8514 20 80 ex 8516 50 00 ex 8516 60 80 10 10 10 Cavity assembly comprising at least: — a transformer with an input of not more than 240 V and an output of not more than 3 000 W — an AC or DC fan motor with an output of not more than 42 watts — a housing made of stainless steel — with or without a magnetron of a microwave output power of not more than 900 W for use in the manufacture of built-in products of headings 8514 20 80 , 8516 50 00 and 8516 60 80  (1) 0 % p/st 31.12.2024
0.4732 ex 8516 90 00 60 Ventilation sub-assembly of an electric deep-fat fryer: — fitted with a motor having a power rating of 8 W at 4 600  rpm, — governed by an electronic circuit, — operating at ambient temperatures above 110 °C, — fitted with a thermoregulator 0 % p/st 31.12.2024
0.5845 ex 8516 90 00 70 Inner pot: — containing side and central openings, — of annealed aluminium, — with a ceramic coating, heat resistant to more than 200° C for use in the manufacture of an electric fryer (1) 0 % p/st 31.12.2022
0.6521 ex 8516 90 00 80 Door assembly incorporating a capacitive sealing element and wavelength choke for use in the manufacture of built-in products of headings 8514 20 80 , 8516 50 00 and 8516 60 80  (1) 0 % p/st 31.12.2024
0.4733 ex 8521 90 00 20 Digital video recorder: — without a hard disk drive, — with or without a DVD-RW drive, — with either motion detection or capability of motion detection through IP connectivity via LAN connector — with or without a USB serial port, for use in the manufacture of closed-circuit television (CCTV) surveillance systems (1) 0 % - 31.12.2024
0.7972 ex 8527 29 00 40 Satellite radio receiver module: — with a rectangular shape of dimensions 41,7 x 32,4 x 3,85 mm (± 25 %), — comprising of heat sink and a printed circuit board with resistors, capacitors, transistors, coils, diodes and IC, — being able to process radio frequency signals, — with a medium frequency unit, for use in the manufacture of products falling under heading 8527 , 8528 , 8529  (1) 0 % - 31.12.2025
0.6316 ex 8528 59 00 20 Liquid crystal display colour video monitor assembly mounted on a frame, — excluding those combined with other apparatus, — comprising touch screen facilities, a printed circuit board with drive circuitry and power supply, used for permanent incorporation or permanent mounting into entertainment systems for vehicles (1) 0 % - 31.12.2024
0.6689 ex 8529 90 65 28 Electronic assembly comprising at least: — a printed circuit board with, — one or more FPGAs (Field Programmable Gate Array) and/or processors for multi-media applications and video signal processing, — operating memory, — with or without flash memory, — with or without one or more USB, HDMI, VGA-, RJ-45 and/or other multimedia interfaces, — with or without sockets and plugs for connecting a LCD-display, a LED lighting and a control panel 0 % p/st 31.12.2022
0.2434 ex 8529 90 65 ex 8548 00 90 30 44 Parts of TV-apparatus, having micro-processor and video-processor functions, comprising at least a micro-controller and a video-processor, mounted on a leadframe and contained in a plastic housing 0 % p/st 31.12.2023
0.4140 ex 8529 90 65 50 Tuner transforming high-frequency signals into mid-frequency signals, for use in the manufacture of products falling under heading 8528  (1) 0 % p/st 31.12.2026
0.4893 ex 8529 90 65 ex 8529 90 92 65 53 Printed circuit board for distributing supply voltage and control signals directly to a control circuit on a TFT glass panel of a LCD module 0 % p/st 31.12.2025
0.4305 ex 8529 90 65 75 Modules comprising at least semiconductor chips for: — the generation of driving signals for pixel addressing, or — driving addressing pixels 0 % p/st 31.12.2022
0.3966 ex 8529 90 92 ex 8548 00 90 15 60 LCD modules, — solely consisting of one or more TFT glass or plastic cells, — not combined with touch screen facilities, — with one or more printed circuits boards with control electronics for pixel addressing only, — with or without backlight unit and — with or without inverters 0 % p/st 31.12.2023
—————
0.6654 ex 8529 90 92 37 Fastening and covering ledges of aluminium alloy containing: — silicon and magnesium, — with a length of 300 mm or more but not more than 2 200  mm, specifically shaped for use in the manufacture of TV sets (1) 0 % - 31.12.2025
0.2425 ex 8529 90 92 42 Aluminium heat sinks and cooling fins, for maintaining the operating temperature of transistors and integrated circuits, for use in the manufacture of products falling within heading 8527 or 8528  (1) 0 % p/st 31.12.2023
0.3198 ex 8529 90 92 43 Plasma display module incorporating only address and display electrodes, with or without driver and/or control electronics for pixel address only and with or without a power supply 0 % p/st 31.12.2023
0.4030 ex 8529 90 92 45 Integrated circuit package with TV reception functionality containing a channel decoder die, tuner die, power management die, GSM filters and discrete as well as embedded passive circuit elements for reception of digitally broadcasting videosignals of DVB-T and DVB-H formats 0 % p/st 31.12.2023
0.4609 ex 8529 90 92 47 Area image sensors (‘progressive scan’ Interline CCD-Sensor or cmOS-Sensor) for digital video cameras in the form of analogue or digital, monolithic integrated circuit with pixels of not more than 12 μm × 12 μm in monochromic version with microlenses applied to each individual pixel (microlens array) or in polychromic version with a colour filter, whether or not with a lenslet (micro lens) array with one lenslet mounted on each individual pixel 0 % p/st 31.12.2024
0.4616 ex 8529 90 92 ex 8536 69 90 49 83 AC socket with a noise filter, composed of: — AC socket (for power cord connection) of 230 V, — integrated noise filter composed of capacitors and inductors, — cable connector for connecting an AC socket with the PDP (Plasma display panel) power supply unit, whether or not equipped with a metal support, which joins the AC socket to the PDP TV set 0 % p/st 31.12.2024
0.7489 ex 8529 90 92 78 OLED modules, consisting of one or more TFT glass or plastic cells, — a diagonal measurement of the screen of 121 cm or more, but not more than 224 cm, — with a thickness of not more than 55mm, — containing organic material, — with control electronic for pixel addressing only, — with V-by-One Interface and with or without a plug for power supply, — with back cover, of a kind used in the manufacture of TV sets and monitors 0 % - 31.12.2023
0.6343 ex 8529 90 92 55 OLED modules, consisting of — one or more TFT glass or plastic cells, containing organic material, — with or without combined touch screen facilities and — one or more printed circuit boards with control electronics for pixel addressing, for use in the manufacture of TV sets and monitors or for use in the manufacture of vehicles of Chapter 87 (1) 0 % p/st 31.12.2024
0.5187 ex 8529 90 92 57 Metal holder, metal fixing item or internal stiffener of metal, for use in the manufacture of televisions, monitors and video players (1) 0 % p/st 31.12.2026
0.6629 ex 8529 90 92 63 LCD module — with a diagonal measurement of the screen of 14,5 cm or more but not more than 38,5 cm, — with or without a touch screen, — with an LED backlight, — with a printed circuit board with EEPROM, microcontroller, LVDS receiver and other active and passive components, — with a plug for power supply and CAN and LVDS interfaces, — with or without electronic components for dynamic adjustments of colour, — in a housing, with or without mechanical, touch-sensitive or contactless control functions and with or without active cooling system, suitable for installation in motor vehicles of Chapter 87 (1) 0 % p/st 31.12.2025
0.5018 ex 8529 90 92 67 Colour LCD display panel for LCD monitors of heading 8528 : — with a diagonal measurement of the screen of 14,48 cm or more but not more than 31,24 cm, — with or without a touch screen, — with backlight, micro-controller, — with a CAN (Controller area network)-controller with one or more LVDS (Low-voltage differential signalling) interfaces and one or more CAN/power supply sockets or with an APIX (Automotive Pixel Link) controller with APIX interface, — in a housing with or without a heat sink at the back of the housing, — without a signal-processing module, — whether or not with haptic and acoustical feedback, for use in the manufacture of vehicles of Chapter 87 (1) 0 % p/st 31.12.2025
0.5788 ex 8529 90 92 70 Rectangular fastening and covering frame: — of an aluminium alloy containing silicon and magnesium, — with a length of 500 mm or more but not more than 2 200  mm, — with a width of 300 mm or more but not more than 1 500  mm, of a kind used for the production of TV sets 0 % p/st 31.12.2022
0.8140 ex 8529 90 92 73 CMOS-Image sensor — with a micro lens on every pixel (micro lens coverage at least 99 % of all pixel), — to capture infra-red light reflected from objects, in order to capture depth images in the cameras built for distance measurements (Time-of-Flight) 0 % - 31.12.2025
0.6781 ex 8529 90 92 85 Colour LCD module in a housing: — with a diagonal screen measurement of 14,48 cm or more but not more than 26 cm, — without touch screen, — with a backlight and micro-controller, — with a CAN (Controller Area Network) controller, an LVDS (Low-Voltage Differential Signalling) interface and a CAN/power connector, — without a signal processing module, — with control electronics for pixel addressing only, — with a motorised mechanism for moving the display screen, for permanent installation in vehicles of Chapter 87 (1) 0 % p/st 31.12.2025
0.7048 ex 8536 41 10 20 Photoelectric (so called photovoltaic) relay consisting of a GaAlAs light-emitting diode, a galvanically isolated input circuit with a photovoltaic generator and a power MOSFET output switch in a casing with connections for a voltage of 60 volts or less and a current of 2 amps or less 0 % - 31.12.2026
0.6180 ex 8536 41 90 40 Power relay with: — electromechanical and/or electromagnetical switching function, — a load current of 3 A or more but not more than 16 A, — a coil voltage of 5 V or more but not more than 24 V, and — a distance between the connector pins of the load circuit not more than 15,6 mm 0 % p/st 31.12.2024
0.7052 ex 8536 49 00 40 Photoelectric (so called photovoltaic) relay consisting of two GaAlAs light-emitting diodes, two galvanically isolated input circuits with photovoltaic generator(s) and four power MOSFET output switches in a casing with connections for a voltage of more than 60 volts 0 % - 31.12.2026
0.7796 ex 8536 49 00 50 Relay with: — a contact current carrying capacity of 5 A or more but not more than 15 A, — a nominal voltage of 80 V or more but not more than 270 V, and — outer dimensions of 19 mm x 15,2 mm x 15,5 mm, for use in the manufacture of control boards for household appliances (1) 0 % - 31.12.2024
0.5795 ex 8536 69 90 51 SCART type connectors, built into a plastic or metal housing, with 21 pins in 2 rows, for use in the manufacture of products falling within headings 8521 and 8528  (1) 0 % p/st 31.12.2022
0.6849 ex 8536 69 90 60 Electrical sockets and plugs with a length of not more than 12,7 mm or a diameter of not more than 10,8 mm, for use in the production of hearing aids and speech processors (1) 0 % p/st 31.12.2022
0.4614 ex 8536 69 90 82 Modular socket or plug for local area networks, whether or not combined with other sockets, integrating at least: — a pulse transformer, including a wide-band ferrite core, — a common mode coil, — a resistor, — a capacitor, for use in the manufacture of products falling within headings 8521 or 8528  (1) 0 % p/st 31.12.2024
0.5028 ex 8536 69 90 84 Universal serial bus (USB) socket or plug in a single or multiple form for connecting with other USB devices, for use in the manufacture of goods falling within headings 8521 or 8528  (1) 0 % p/st 31.12.2025
0.5318 ex 8536 69 90 85 Socket or plug, built into a plastic or metal housing, with no more than 96 pins, for use in the manufacture of products falling within headings 8521 or 8528  (1) 0 % p/st 31.12.2026
0.5316 ex 8536 69 90 86 High-Definition Multimedia Interface (HDMI) type socket or plug, built into a plastic or metal housing, with 19 pins or 20 pins in 2 rows, for use in the manufacture of products falling within headings 8521 or 8528  (1) 0 % p/st 31.12.2026
0.5181 ex 8536 70 00 10 Optical socket, plug or connector, for use in the manufacture of goods falling within headings 8521 or 8528  (1) 0 % p/st 31.12.2026
0.7873 ex 8537 10 91 20 Electronic assembly containing: — a microprocessor, — a programmable memory and other electronic components mounted on a printed circuit, — with or without light-emitting diode (LED) or liquid crystal display (LCD) indicators, for use in the manufacture of products of subheadings 8418 21 , 8418 29 , 8421 12 , 8422 11 , 8450 11 , 8450 12 , 8450 19 , 8451 21 , 8451 29 and 8516 60  (1) 0 % - 31.12.2024
0.8085 ex 8537 10 91 45 Main hybrid system controller, diagnosing and controlling the elements of the hybrid propulsion system, with: — a programmable memory, — a microprocessor, — at least one composite connector, — a voltage of 24 V, — with a length of 350 mm or more but not more than 400 mm, — with a width of 200 mm or more but not more than 250 mm, — with a height of 80 mm or more but not more than 120 mm, — in a metal housing 0 % - 31.12.2025
0.6864 ex 8537 10 91 50 Fuse control module in a plastic housing with mounting brackets comprising: — sockets with or without fuses, — connecting ports, — a printed circuit board with embedded microprocessor, micro switch and relay, of a kind used in the manufacture of goods of chapter 87 0 % p/st 31.12.2025
0.7627 ex 8537 10 91 57 Programmable memory control board with: — 4 or more stepper motor drivers, — 4 or more outputs with MOSFET transistors, — a main processor, — 3 or more inputs for temperature sensors, — for a voltage of 10 V or more but not more than 30 V, for use in the manufacture of 3D printers (1) 0 % - 31.12.2023
0.7609 ex 8537 10 91 59 Electronic control units for controlling inter axle torque transferring in all-wheel drive vehicles including: — a printed circuit board with programmable memory controller, — one single connector, and — working at 12 V 0 % - 31.12.2023
0.6163 ex 8537 10 91 ex 8537 10 98 60 45 Electronic control units, manufactured according to class 2 of IPC-A-610E standard, with at least: — an AC power input of 208 V or more but not more than 400 V, — a logic power input of 24 V DC, — an automatic circuit breaker, — a main power switch, — internal or external electrical connectors and cables, — in a housing with dimension of 281 mm x 180 mm x 75 mm or more, but not more than 630 mm x 420 mm x 230 mm, of a kind used for manufacturing recycling or sorting machines 0 % p/st 31.12.2023
0.7610 ex 8537 10 91 63 Electronic control units able to control automatic continuous variable transmission for passenger vehicles including: — a printed circuit board with programmable memory controller, — a metallic housing, — one single connector, — working at 12V 0 % - 31.12.2023
0.7360 ex 8537 10 91 65 Electronic control unit for optimal engine performance: — with a programmable memory, — with a voltage of 8 V or more but not more than 16 V, — with at least one composite connector, — in a metal housing, — whether or not with metal holders for use in the manufacture of motor vehicles (1) 0 % - 31.12.2022
0.7660 ex 8537 10 91 67 Electronic Engine Control Unit (ECU) with: — a printed circuit board (PCB), — 12 Volts voltage, — reprogrammable, — a micro-processor that can control, evaluate and manage support service functions in cars (injection and ignition advance values of fuel, fuel and air flow rate), for use in the manufacture of goods of Chapter 87 (1) 0 % - 31.12.2023
0.7251 ex 8537 10 91 70 Programmable motor memory controller for a voltage not exceeding 1 000  V, comprising at least: — a printed circuit with active and passive components, — an aluminium housing, and — multiple connectors 0 % p/st 31.12.2022
0.6140 ex 8537 10 98 30 Motor bridge ICs without programmable memory consisting of: — one or more integrated circuits, not interconnected, on separate lead frames, — also with discrete Metal Oxide Field Effect Transistors (MOSFET) for controlling DC motors in cars — mounted in a plastic housing 0 % p/st 31.12.2023
0.7194 ex 8537 10 98 33 Lever for control module under the steering wheel: — with several single or multi-positional electrical switches (push-button, rotary or other), — equipped with printed circuit boards and/or electrical cables, — for a voltage of 9 V or more but not more than 16 V, of a kind used in the manufacture of motor vehicles of Chapter 87 0 % p/st 31.12.2026
0.6889 ex 8537 10 98 35 Electronic control unit without memory, for a voltage of 12 V, for information exchange systems in vehicles (for connection of audio, telephony, navigation, camera and wireless car service) containing: — 2 rotary knobs — 27 or more pushbuttons — LED lights — 2 integrated circuits for receiving and sending of control signals via the LIN-bus 0 % p/st 31.12.2025
0.6508 ex 8537 10 98 40 Electronic control unit for monitoring car vehicle tyre pressure comprising plastic box with printed circuit board inside and with or without metal holder, of: — a length of 50 mm or more, but not more than 120 mm, — a width of 20 mm or more but not more than 40 mm, — a height of 30 mm or more, but not more than 120 mm, of a kind used in the manufacture of goods of Chapter 87 0 % p/st 31.12.2024
0.6507 ex 8537 10 98 50 Electronic control unit BCM (Body Control Module) comprising — plastic box with printed circuit board and metal holder, — with voltage of 9V or more, but not more than 16V, — able to control, evaluate and manage functions of assisting services in an automobile, at least wiper timing, window heating, interior lighting, seat belt reminder of a kind used in the manufacture of goods of Chapter 87 0 % p/st 31.12.2024
0.6520 ex 8537 10 98 60 Electronic assembly consisting of: — a microprocessor, — light-emitting diode (LED) or liquid crystal display (LCD) indicators, — electronic components mounted on a printed circuit, for use in the manufacture of built-in products of headings 8514 20 80 , 8516 50 00 and 8516 60 80  (1) 0 % p/st 31.12.2024
0.7171 ex 8537 10 98 75 Control unit for keyless access to vehicle and vehicle starting, with electrical switching apparatus, in a plastic housing, for a voltage of 12 V, whether or not with: — an antenna, — a connector, — a metal holder, for use in the manufacture of goods of Chapter 87 (1) 0 % p/st 31.12.2023
0.8132 ex 8537 10 98 80 Propulsion Control System with at least: — a DC/AC inverter, — a power of 190 kW or more but not more than 220 kW, — a high voltage circuits with AC and DC interfaces for connecting a traction motor, generator and energy storage system, — an integral control of all drive motor and generator traction system functions, 0 % p/st 31.12.2025
— a CAN communications interface with System Control Unit, — a liquid cooled system, — a length of 300 mm or more but not more than 950 mm, — a width of 350 mm or more but not more than 600 mm, — a height of 200 mm or more but not more than 350 mm, — a weight of 40 kg or more but not more than 90 kg
0.8124 ex 8537 10 98 88 Control panel for car radio and/or navigation control with: — electronic passive components, — at least two switches, — LEDs, — at least one connector, — whether or not warning triangle switch, — for a voltage not exceeding 16 V, for use in the manufacture of goods of Chapter 87 (1) 0 % - 31.12.2025
0.3663 ex 8537 10 98 93 Electronic control units for a voltage of 12 V, for use in the manufacture of vehicle mounted temperature control systems (1) 0 % p/st 31.12.2023
0.6866 ex 8538 90 91 ex 8538 90 99 20 50 Interior antenna for a car door locking system, comprising: — an antenna module in a plastic housing, — a connection cable with a plug, — at least two mounting brackets, whether or not PCB including integrated circuits, diodes and transistors, for use in the manufacture of goods of Chapter 87 (1) 0 % p/st 31.12.2025
0.6397 ex 8538 90 99 ex 8547 20 00 30 10 Polycarbonate or acrylonitrile butadiene styrene covers and cases for steering pad switches whether or not coated on the outside with a scratch resistant paint 0 % p/st 31.12.2024
0.6399 ex 8538 90 99 40 Polycarbonate control interface buttons for steering pad switches coated on the outside with scratch resistant paint, in immediate packages of 500 pieces or more 0 % p/st 31.12.2024
0.7195 ex 8538 90 99 60 Front control panel, in the form of a plastic box, with light guides, rotary switches, pressure switches and buttons switches, or other type of switches, without any electrical component, of a kind used in the dashboard of motor vehicles of Chapter 87 0 % p/st 31.12.2026
0.2580 ex 8540 20 80 91 Photomultiplier 0 % - 31.12.2026
0.3959 ex 8540 71 00 20 Continuous wave magnetron with: — a fixed frequency of 2 460 MHz, — a packaged magnet, — a probe output, — an output power of 960 or more but not more than 1 500  W 0 % - 31.12.2023
0.3445 ex 8540 89 00 91 Displays in the form of a tube consisting of a glass housing mounted on a board the dimensions of which do not exceed 300 mm × 350 mm excluding leads. The tube contains one or more rows of characters or lines arranged in rows, each character or line consisting of fluorescent or phosphorescent elements. These elements are mounted on a metallised base which is covered with fluorescent substances or phosphorescent salts which give off light when bombarded with electrons 0 % - 31.12.2023
0.3443 ex 8540 89 00 92 Vacuum fluorescent display tube 0 % - 31.12.2023
0.7409 ex 8540 91 00 20 Thermionic electron source (emitter point) of lanthanum hexaboride (CAS RN 12008-21-8) or cerium hexaboride (CAS RN 12008-02-5), in a metal housing with electric connectors having — a graphite carbon shield mounted in a mini-Vogel type system — separate pyrolytic carbon blocks used as heating elements and — a cathode temperature of less than 1 800 K at a filament current of 1,26 A 0 % - 31.12.2022
0.7130 ex 8543 70 90 15 Laminated electrochromic film consisting of: — two outer layers of polyester, — a middle layer of acrylic polymer and silicone, and — two electric connection terminals 0 % - 31.12.2026
0.2826 ex 8543 70 90 30 Amplifier, consisting of active and passive elements mounted on a printed circuit, contained in a housing 0 % p/st 31.12.2023
0.7055 ex 8543 70 90 33 High-frequency amplifier comprising one or more integrated circuits and one or more discrete capacitor chips, whether or not with IPD (integrated passive devices) on a metal flange in a housing 0 % - 31.12.2026
0.2822 ex 8543 70 90 35 Radio frequency (RF) modulator, operating with a frequency range of 43 MHz or more but not more than 870 MHz, capable of switching VHF and UHF signals, consisting of active and passive elements mounted on a printed circuit, contained in a housing 0 % p/st 31.12.2023
0.2590 ex 8543 70 90 45 Piezo-electric crystal oscillator with a fixed frequency, within a frequency range of 1,8 MHz to 67 MHz, contained in a housing 0 % p/st 31.12.2023
0.3131 ex 8543 70 90 55 Opto-electronic circuit comprising one or more light-emitting diodes (LEDs), whether or not equipped with an integrated driving circuit, and one photodiode with amplifier circuit, whether or not with an integrated logic gate arrays circuit or one or more light-emitting diodes and at least 2 photodiodes with an amplifier circuit, whether or not with an integrated logic gate arrays circuit or other integrated circuits, contained in a housing 0 % p/st 31.12.2023
0.2820 ex 8543 70 90 80 Temperature compensated oscillator, comprising a printed circuit on which are mounted at least a piezo-electric crystal and an adjustable capacitor, contained in a housing 0 % p/st 31.12.2023
0.2816 ex 8543 70 90 85 Voltage controlled oscillator (VCO), other than temperature compensated oscillators, consisting of active and passive elements mounted on a printed circuit, contained in a housing 0 % p/st 31.12.2023
0.4464 ex 8544 20 00 ex 8544 42 90 ex 8544 49 93 10 20 20 PET/PVC insulated flexible cable with: — a voltage of not more than 60 V, — a current of not more than 1 A, — a heat resistance of not more than 105 °C, — individual wires of a thickness of not more than 0,1 mm (± 0,01 mm) and a width of not more than 0,8 mm (± 0,03 mm), — a distance between conductors of not more than 0,5 mm and — a pitch (distance from centreline to centreline of conductors) of not more than 1,25 mm 0 % - 31.12.2023
0.6709 ex 8544 20 00 30 Antenna connecting cable for the transmission of radio (AM/FM) signal and whether or not GPS signal, containing: — a coaxial cable, — two or more connectors, and — 3 or more plastic clips for attachment to the dashboard of a kind used in the manufacture of goods of Chapter 87 0 % - 31.12.2026
0.6194 ex 8544 30 00 30 Multi-measurement wire harness of a voltage of 5V or more but not more than 90 V capable of measuring some or all of the following; — a travel speed of not more than 24 km/h — a motor speed of not more than 4 500 rpm — hydraulic pressure of not more than 25 MPa — mass of not more than 50 metric tonnes for use in the manufacture of vehicles of heading 8427  (1) 0 % p/st 31.12.2023
0.6377 ex 8544 30 00 ex 8544 42 90 40 40 Wire harness of the steering system with an operating voltage of 12 V, equipped with connectors on both sides, having at least 3 plastic anchor clamps for mounting on a motor vehicle steering box 0 % p/st 31.12.2024
0.7848 ex 8544 30 00 45 Linking seven-core cable for connecting sensor for pressure measure in intake manifold (Boost Pressure Sensor - BPS) and sockets for glow plugs with common connector, containing four sockets and two connectors for use in the manufacture of compression-ignition internal combustion piston engines for passenger car (1) 0 % - 31.12.2024
0.7847 ex 8544 30 00 55 Connecting five-core cable with connectors for coupling the temperature sensor and the exhaust manifold pressure difference sensor to the common connector for use in the manufacture of compression-ignition internal combustion piston engines of passenger cars (1) 0 % - 31.12.2024
0.6710 ex 8544 30 00 ex 8544 42 90 60 50 Four-core connecting cable containing two female connectors for the transmission of digital signals from navigation and audio systems to a USB connector, for use in the manufacture of goods of Chapter 87 (1) 0 % - 31.12.2025
0.6323 ex 8544 30 00 70 Multi-measurement wire harness: — of a voltage of 5 V or more but not more than 90 V, — capable of transmitting information for use in the manufacture of vehicles of heading 8711  (1) 0 % p/st 31.12.2024
0.6867 ex 8544 30 00 85 Extension two-core cable with two connectors, containing at least: — a rubber grommet, — a metal attachment bracket, of a kind used to connect vehicle speed sensors in the manufacture of vehicles of Chapter 87 0 % p/st 31.12.2025
0.4980 ex 8544 42 90 10 Data transmission cable capable of a bit rate transmission of 600 Mbit/s or more, with: — a voltage of 1,25 V (± 0,25 V) — connectors fitted at one or both ends, at least one of which contains pins with a pitch of 1 mm, — outer screening shielding, used solely for communication between LCD, PDP or OLED panel and video processing electronic circuits 0 % p/st 31.12.2023
0.7545 ex 8544 42 90 15 PVC isolated flexible eight wire cable with: — a length of not more than 2 100  mm — an operating voltage of 5V or more, but not more than 35V — a temperature resistance of not more than 80°C — either an over-moulded 7 pin round 270° DIN male connector, a 6 pin A1101 male connector or a 8 pin A1001 male connector on one end and — at least two stripped and tinned wires on the other end — whether or not with mounted rubber pad with integrated strain relief 0 % - 31.12.2023
0.7538 ex 8544 42 90 25 PVC isolated flexible cable with: — a length of not more than 1 800  mm — an operating voltage of 5V or more, but not more than 35V — a heat resistance of not more than 80°C — an over-moulded 8 pin MiniFit male connector on one end — either a 6 pin MiniFit socket or two over-moulded AMP connectors on the other end — a over-moulded resistor inside the connector and — a moulded strain relief on the cable — whether or not with a over-moulded diode inside a connector 0 % - 31.12.2023
0.7544 ex 8544 42 90 35 PVC isolated flexible six or eight wire cable with: — a length of not more than 1 300  mm — an operating voltage of 5V or more, but not more than 35V — a heat resistance of not more than 80°C — either an over-moulded 8 pin MiniFit male connector or an over-moulded 6-pin DIN male connector on one end and — either an over-moulded 8 pin MiniFit socket or an 8 pin MicroFit male connector on the other end 0 % - 31.12.2023
0.6853 ex 8544 42 90 70 Electric conductors: — of a voltage of not more than 80 V, — with a length of not more than 120 cm, — fitted with connectors, for use in the manufacture of hearing aids, accessory kits and speech processors (1) 0 % p/st 31.12.2025
0.7173 ex 8544 42 90 80 12-wire connecting cable containing two connectors — of a voltage of 5 V, — with a length of not more than 300 mm for use in the manufacture of goods of Chapter 87 (1) 0 % p/st 31.12.2023
0.2424 ex 8544 49 93 10 Elastomeric connector, of rubber or silicone, consisting of one or more conductor elements 0 % p/st 31.12.2023
0.6861 ex 8544 49 93 30 Electric conductors: — of a voltage of not more than 80 V, — of a platinum-iridium-alloy, — coated with poly(tetrafluoroethylene), — without connectors, for use in the manufacture of hearing aids, implants and speech processors (1) 0 % m 31.12.2025
0.3144 ex 8548 00 90 41 Unit, consisting of a resonator operating within a frequency range of 1,8 MHz or more but not more than 40 MHz and a capacitor, contained in a housing 0 % p/st 31.12.2023
0.3193 ex 8548 00 90 43 Contact image sensor 0 % p/st 31.12.2023
0.3763 ex 8548 00 90 48 Optical unit, containing at least — a laser diode and a photodiode operating at a typical wavelength of 635 nm or more but not more than 815 nm — an optical lens — a ‘Recording Photodetector Integrated Circuit’ (PDIC) — a focussing and tracking actuator 0 % p/st 31.12.2026
—————
0.5183 ex 8549 13 20 ex 8549 14 20 10 10 Spent lithium-ion or nickel metal hydride electric accumulators 0 % - 31.12.2023
0.7165 ex 8708 10 10 ex 8708 10 90 10 10 Plastic cover for filling the space between the fog lights and the bumper whether or not with a chrome strip for use in the manufacture of goods of Chapter 87 (1) 0 % p/st 31.12.2026
0.6513 ex 8708 30 10 ex 8708 30 91 ex 8708 30 99 20 60 10 Motor powered brake actuation unit — with a rating of 13,5 V (± 0,5 V) and — a ball screw mechanism to control brake fluid pressure in the master cylinder for use in the manufacture of electric motor vehicles (1) 0 % p/st 31.12.2024
0.6590 ex 8708 30 10 ex 8708 30 91 40 30 Body of disc type brake in BIR (‘Ball in Ramp’) or EPB (‘Electronic Parking Brake’) or with hydraulic function only, containing functional and mounting openings and guide grooves, of a kind used in the manufacture of goods of Chapter 87 0 % p/st 31.12.2024
0.6502 ex 8708 30 10 ex 8708 30 91 60 20 Non-asbestos organic brake pads with friction material mounted to the band steel back plate for use in the manufacture of goods of Chapter 87 (1) 0 % p/st 31.12.2024
0.6707 ex 8708 30 10 ex 8708 30 91 70 40 Ductile cast iron brake caliper jaw, of a kind used in the manufacture of goods of Chapter 87 0 % p/st 31.12.2025
0.6869 ex 8708 40 20 ex 8708 40 50 20 10 Automatic hydrodynamic gearbox — with a hydraulic torque converter, — without transfer box and cardan shaft, — whether or not with front differential, for use in the manufacture of motor vehicles of Chapter 87 (1) 0 % p/st 31.12.2025
0.7253 ex 8708 40 20 30 Automatic gearbox with a hydraulic torque converter with: — at least eight gears, — an engine torque of 300 Nm or more, and — transverse or longitudinal installation for use in the manufacture of motor vehicles of heading 8703  (1) 0 % p/st 31.12.2022
0.7383 ex 8708 40 20 ex 8708 40 50 50 40 Transmission assembly which houses 3 other shafts inside it and offers a rotating switch for shift position consisting: — cast aluminium body, — differential gear, — 2 electrical motors and gears, with the dimensions of: — a width of 280 mm or more but not more than 470 mm, — a height of 350 mm or more but not more than 595 mm, — a length of 410 mm or more but not more than 690 mm, for use in the manufacture of motor vehicles of Chapter 87 (1) 0 % - 31.12.2022
0.7655 ex 8708 40 20 ex 8708 40 50 60 50 Automatic transmission assembly with rotary gear shifter with: — aluminium casting housing, — differential gear, — 9 Speed automatic, — electronic range select gear selection system, with dimensions of: — a width of 330 mm or more but not more than 420 mm, — a height of 380 mm or more but not more than 450 mm, — a length of 580 mm or more but not more than 690 mm, for use in the manufacture of the vehicles in heading 87 (1) 0 % - 31.12.2023
0.7856 ex 8708 40 20 ex 8708 40 50 70 60 Manual gearbox in cast aluminium housing for transverse installation with: — a width of not more than 480 mm, — a height of not more than 400 mm, — a length of not more than 550 mm, — five or six gears, — a differential gear, — an engine torque of 400 Nm or less, for use in the manufacture of motor vehicles of Heading 8703  (1) 0 % - 31.12.2024
0.8279 ex 8708 40 20 80 Transmission gearbox without torque converter, with: — dual clutch, — 7 or more forward gears, — 1 reverse gear, — a maximum torque of 390 Nm, — whether or not with electric motor integrated, — a height of 480 mm or more but not more than 600 mm, — a width of 350 mm or more but not more than 450 mm, and — a weight of 80kg or more but not more than 110 kg, for use in the manufacture of motor vehicles of Heading 8703  (2) 0 % - 31.12.2026
0.7987 ex 8708 50 20 ex 8708 50 55 15 50 Spherical outboard constant velocity joint ball bearing cage, part of the vehicle’s drive system, made of material suitable to be carburized with a carbon content of 0,14 % or more but not more than 0,57 %, forged, turned, punched, milled and hardened 0 % - 31.12.2025
0.6648 ex 8708 50 20 ex 8708 50 99 20 10 Transmission shaft in carbon fibre reinforced plastics consisting of a unique piece without any joint in the middle — of a length of 1 m or more but not more than 2 m, — of a weight of 6 kg or more but not more than 9 kg 0 % p/st 31.12.2025
0.7988 ex 8708 50 20 ex 8708 50 99 25 45 Ball-type outboard constant velocity joint housing for transmitting a torque from the engine and transmission to the wheels of motor vehicles, in a form of an outer race, with: — 6 ball tracks or more but not more than 8, with — a thread, — an external involute spline with 21 or more but not more than 38 teeth, — for running with bearing balls made of steel with a carbon content of 0,48 % or more but not more than 0,57 %, — forged, turned, milled and hardened 0 % - 31.12.2025
0.7989 ex 8708 50 20 ex 8708 50 99 35 50 Inboard constant velocity joint tripod housing, with: — an outer diameter of 67,0 mm or more but not more than 99,0 mm, — 3 cold calibrated roller tracks with a diameter of 29,95 mm or more but not more than 49,2 mm, — an external spline with 21 teeth or more but not more than 41, — forged, turned, rolled and hardened 0 % - 31.12.2025
0.7990 ex 8708 50 20 ex 8708 50 99 45 55 Outboard constant velocity joint inner race, part of the vehicle’s drive system, with: — 6 or more but not more than 8 ball tracks, suitable for bearing balls with a diameter of 12,0 mm or more but not more than 24,0 mm, — forged, turned, milled, broached and hardened 0 % - 31.12.2025
0.7359 ex 8708 50 20 ex 8708 50 55 ex 8708 50 91 ex 8708 50 99 50 20 10 40 Double flange bearing of 3rd generation, for motor vehicles, — with double-row ball bearing, — whether or not with impulse (encoder) ring, — whether or not with antilock brake system (ABS) sensor, — whether or not with mounted screws, for use in the manufacture of goods of chapter 87 (1) 0 % - 31.12.2022
0.7991 ex 8708 50 20 ex 8708 50 99 55 60 Inboard constant velocity joint tripod spider, part of the vehicle’s drive system, with: — 3 trunnions with a diameter of 17,128 mm or more but not more than 25,468 mm, — forged, turned, broached and hardened 0 % - 31.12.2025
0.7581 ex 8708 50 20 ex 8708 50 99 60 15 Car transfer case with single input, dual output, to distribute torque between front and rear axles in an aluminium housing, with dimension of not more than 565 × 570 × 510 mm, comprising: — at least an actuator, — whether or not an interior distribution by chain 0 % - 31.12.2024
0.7692 ex 8708 50 20 ex 8708 50 99 65 20 Intermediate steel shaft connecting the gearbox with semi-axle with: — a length of 300 mm or more but not more than 650 mm, — a spline end on both sides, — whether or not with a pressed bearing in the case, — whether or not with a holder, for use in the manufacture of goods of Chapter 87 (1) 0 % - 31.12.2023
0.7593 ex 8708 50 20 ex 8708 50 99 70 25 Housing of tripod type half shaft inboard joint for transmitting a torque from engine and transmission to wheels of motor vehicles with: — an outer diameter of 67,0 mm or more but not more than 84,5 mm, — 3 cold calibrated roller tracks with a diameter of 29,90 mm or more but not more than 36,60 mm, — sealing diameter 34,0 mm or more but not more than 41,0 mm, without lead angle, — spline with 21 teeth or more but not more than 35, — bearing seat diameter of 25,0 mm or more but not more than 30,0 mm, with or without oil grooves 0 % - 31.12.2023
0.7640 ex 8708 50 20 ex 8708 50 99 75 35 Outboard joint assembly for transmitting a torque from engine and transmission to wheels of motor vehicles, consisting of: — an inner race with 6 ball tracks for running with the bearing balls with a diameter 15,0 mm or more but not more than 20,0 mm, — an outer race with 6 ball tracks for running with 6 bearing balls, made of steel with carbon content of 0,45 % or more but not more than 0,58 %, with thread and with a spline with 26 teeth or more but not more than 38, — a spherical cage keeping bearing balls in the ball tracks of outer race and inner race in proper angular position, made of material suitable for carburizing with carbon content of 0,14 % or more but not more than 0,25 %, and — with a grease compartment, capable of working at constant speed at variable articulation angle not higher than 50 degrees 0 % - 31.12.2023
0.6711 ex 8708 80 20 ex 8708 80 35 10 10 Upper strut insulator containing: — a metal holder with three mounting screws, and — a rubber bump, for use in the manufacture of goods of Chapter 87 (1) 0 % p/st 31.12.2025
0.7607 ex 8708 80 99 20 Aluminium suspension link arm, with dimensions of: — a height of 50 mm or more but not more than 150 mm, — a width of 10 mm or more but not more than 100 mm, — a length of 100 mm or more but not more than 600 mm, — a mass of 1 000  g or more but not more than 3 000  g, equipped with at least two bushed holes made of aluminium alloy with the following characteristics: — a tensile strength of 200 MPa or more, — a strength of 19 kN or more, — a stiffness of 5 kN/mm or more but not more than 9 kN/mm, — a frequency of 400 Hz or more but not more than 600 Hz 0 % p/st 31.12.2023
0.7365 ex 8708 80 99 30 Surface-hardened, steel piston rod for a hydraulic or hydropneumatic shock absorber of motor vehicles: — with a chrome coating, — of a diameter of 11 mm or more, but not more than 28 mm, — of a length of 80 mm or more, but not more than 600 mm, with a threaded end or a mandrel for resistance welding 0 % - 31.12.2022
0.6509 ex 8708 91 20 ex 8708 91 35 20 10 Aluminium cooler using compressed air with a ribbed design of a kind used in the manufacture of goods of Chapter 87 0 % p/st 31.12.2024
0.6859 ex 8708 91 20 ex 8708 91 99 30 30 Aluminium alloy inlet or outlet air tank of heat exchangers for car cooling systems, manufactured to standard EN AC 42100 or EN AC 43000 T6 with: — an insulating area flatness of not more than 0,1 mm, — a permissible particle quantity of 0,3 mg per tank, — a distance between pores of 2 mm or more, — pore sizes of not more than 0,4 mm, and — not more than 3 pores larger than 0,2mm, — with a weight of 0,2 kg or more but not more than 3 kg 0 % p/st 31.12.2025
0.7716 ex 8708 91 35 20 Turbocharger cooling duct containing: — an aluminum alloy duct with at least one metal holder and at least two mounting holes, — a rubber pipe with clips, — a stainless steel flange highly resistant to corrosion [SUS430JIL], for use in the manufacture of compression ignition engines of motor vehicles (1) 0 % - 31.12.2024
0.7231 ex 8708 91 99 ex 8708 99 97 40 55 Assembly for supplying compressed air, whether or not with a resonator, comprising at least: — one solid aluminium tube whether or not with mounting bracket, — one flexible rubber hose, and — one metal clip for use in the manufacture of goods of Chapter 87 (1) 0 % - 31.12.2022
0.7665 ex 8708 92 99 10 Exhaust system inner liner: — with a wall thickness of 0,7 mm or more but not more than 1,3 mm, — made of stainless steel sheets or coil class 1.4310 and 1.4301 according to norm EN 10088, — whether or not with mounting holes, for use in the manufacture of exhaust systems for automobiles (1) 0 % - 31.12.2023
0.7664 ex 8708 92 99 20 Pipe for guiding exhaust gases from the combustion engine: — with a diameter of 40 mm or more but not more than 100 mm, — with a length of 90 mm or more but not more than 410 mm, — with a wall thickness of 0,7 mm or more but not more than 1,3 mm, — of stainless steel, for use in the manufacture of exhaust systems for automobiles (1) 0 % - 31.12.2023
0.7696 ex 8708 92 99 30 Exhaust system end cover: — with a wall thickness of 0,7 mm or more but not more than 1,3 mm, — made of stainless steel class 1.4310 and 1.4301 according to norm EN 10088, — whether or not with inner liner, — whether or not with surface treatment, for use in the manufacture of exhaust systems for automobiles (1) 0 % - 31.12.2023
0.7849 ex 8708 93 10 ex 8708 93 90 40 40 Clutch pedal with electronic parking brake connection (EPB), whether or not with sending signal function for: — cruise control reset, — electronic parking brake release, — start and stop engine management under Idle Stop and Go system (ISG), for use in the manufacture of passenger vehicles (1) 0 % - 31.12.2024
0.6526 ex 8708 94 20 ex 8708 94 35 10 20 Rack steering gear in aluminium housing with inner tie rod joints (axial joints) or with tie rods for use in the manufacture of goods of Chapter 87 (1) 0 % p/st 31.12.2024
—————
0.6687 ex 8708 95 10 ex 8708 95 99 30 40 Inflatable sewn safety cushion of high strength polyamide fibre: — folded into three-dimensional packing form, fixed by thermal forming, dedicated fixation seams, fabric cover or plastic staples, or — flat safety cushion with or without thermal folding 0 % p/st 31.12.2025
0.6688 ex 8708 95 10 ex 8708 95 99 20 30 Inflatable safety cushion of high strength polyamide fibre: — sewn, — folded, — with three-dimensionally applied silicone bonding for air bag cavity forming and load-regulated air bag sealing, — suitable for cool inflator technology 0 % p/st 31.12.2025
0.8292 ex 8708 95 99 50 Airbag inflator containing both pyrotechnics and cold gas as propellant for safety airbags of vehicles, in each individual consignment of 1 000 pieces or more 0 % - 31.12.2026
0.7444 ex 8708 99 10 ex 8708 99 97 25 45 Plastic air guide for directing air flow to the surface of intercooler for use in the production of motor vehicles (1) 0 % - 31.12.2023
0.6583 ex 8708 99 10 ex 8708 99 97 60 50 Aluminium engine bracket, with dimensions of: — height of more than 10 mm but not more than 200 mm, — width of more than 10 mm but not more than 250 mm, — length of more than 10 mm but not more than 200 mm, equipped with at least two fixing holes, made of aluminium alloys ENAC-46100 or ENAC-42100 (based on the norm EN:1706) with following characteristics: — internal porosity not more than 1 mm, — outer porosity not more than 2 mm, — rockwell hardness HRB 10 or more, of a kind used in the production of suspensions systems for engines in motor vehicles 0 % p/st 31.12.2024
0.7921 ex 8708 99 97 18 Hydrostatic speed changer: — with a hydro pump and a differential with wheel axle, — whether or not with a fan impeller and/or a pulley, for use in the manufacture of tractors of subheadings 8701 91 90 and 8701 92 90 , whose main function is that of a lawn mower (1) 0 % p/st 31.12.2023
0.8127 ex 8708 99 97 28 A set of Type 4 H2 cylinders, in accordance with the EC 79 standard, consisting of two to eight cylinders on aluminum frames: — cylinders made of high density polyethylene (HDPE) composite reinforced with a braid of glass and carbon fibers in epoxy resin, — with an operating pressure of not less than 35 MPa, — with a durability declared by the manufacturer of not less than 20 years, — with a cylinder capacity of 180 liters or more but not more than 375 liters, — equipped with a set of solenoid, manual and safety PRD valves, — with a total width of 1 800  mm or more but not more than 2 300  mm, — with a total height of 400 mm or more but not more than 500 mm, — with a total length of 1 200  mm or more but not more than 3 600  mm 0 % - 31.12.2025
0.8128 ex 8708 99 97 38 A set of Compressed Natural Gas (CNG) cylinders type CNG-4, in accordance with the ECE R110 standard, consisting of four or five cylinders on aluminum frames: — made of high density polyethylene (HDPE) composite reinforced with a braid of glass and carbon fibers in epoxy resin, — with an operating pressure of not less than 20 MPa, — with a shelf life declared by the manufacturer of not less than 20 years, — with a cylinder capacity of 315 liters or more but not more than 375 liters, — equipped with a set of solenoid, manual and safety PRD valves, — with a total width of 2 200  mm or more but not more than 2 300  mm, — with a total height of 450 mm or more but not more than 460 mm, — with a total length of 3 500  mm or more but not more than 3 600  mm 0 % - 31.12.2025
0.7282 ex 8708 99 97 85 Electroplated interior or exterior parts consisting of: — a copolymer of acrylonitrile-butadiene-styrene (ABS), whether or not mixed with polycarbonate, — layers of copper, nickel and chromium for use in the manufacturing of parts for motor vehicles of heading 8701 to 8705  (1) 0 % p/st 31.12.2022
0.6686 ex 8714 10 90 10 Motorcycle fork rod inner tubes: — of SAE1541 carbon steel, — with a hard chromium layer of 20 μm (+ 15 μm/ – 5 μm), — having a wall thickness of 1,3 mm or more, but not more than 1,6 mm, — having an elongation at break of 15 %, — perforated 0 % p/st 31.12.2025
0.6848 ex 8714 10 90 70 Motor bikes radiators in consignment of 100 pieces or more 0 % p/st 31.12.2022
0.6172 ex 8714 91 30 ex 8714 91 30 ex 8714 91 30 25 35 72 Front forks, except rigid (non-telescopic) front forks made entirely of steel, for use in the manufacture of bicycles (including electric bicycles) (1) 0 % - 31.12.2023
0.6879 ex 8714 96 10 10 Pedals, for use in the manufacture of bicycles (including electric bicycles) (1) 0 % - 31.12.2025
0.7421 ex 8714 99 10 ex 8714 99 10 20 89 Bicycle handlebars: — with or without an integrated stem, — either made out of carbon fibres and synthetic resin or made of aluminium, for use in the manufacture of bicycles (including electric bicycles) (1) 0 % - 31.12.2022
0.7710 ex 8714 99 50 ex 8714 99 50 11 91 Derailleur gears, consisting of: — rear derailleur and mounting articles, — with or without front derailleur, for use in the manufacture of bicycles (including electric bicycles) (1) 0 % - 31.12.2024
0.6878 ex 8714 99 90 30 Seat posts, for use in the manufacture of bicycles (including electric bicycles) (1) 0 % p/st 31.12.2025
0.7708 ex 8714 99 90 40 Stem for bicycle handlebars, for use in the manufacture of bicycles (including electric bicycles) (1) 0 % - 31.12.2024
0.3191 ex 9001 10 90 10 Image reverser made up from an assembly of optical fibres 0 % - 31.12.2023
0.5358 ex 9001 10 90 30 Polymer optical fibre with: — a poly(methyl methacrylate) core, — a cladding of fluorinated polymer, — a diameter of not more than 3,0 mm, and — a length of more than 150 m, of a kind used in the manufacture of polymer fibre cables 0 % - 31.12.2022
0.6402 ex 9001 50 41 ex 9001 50 49 40 40 Organic uncut corrective eyeglass lens, finished on both sides, to undergo a coating, colouring, edging, mounting or any other substantial process for use in the manufacture of corrective glasses (1) 0 % - 31.12.2022
0.6401 ex 9001 50 80 30 Round organic uncut, semi-finished eyeglass lens with corrective effect, finished on one side, of a kind used for the manufacture of finished eyeglass lenses 0 % - 31.12.2026
0.7590 ex 9002 11 00 18 Lens assembly consisting of a cylinder-shaped cover made of metal or plastic and optical elements with: — a horizontal field of view range to a maximum of 120 deg, — a diagonal field of view range to a maximum of 105 deg, — a focal length to a maximum of 7,50 mm, — a relative aperture of a maximum of F/2,90, — a maximum diameter of 22 mm 0 % - 31.12.2023
0.5692 ex 9002 11 00 20 Lenses: — measuring not more than 95 mm × 55 mm × 50 mm, — with a resolution of 160 lines/mm or better, and — with a zoom ratio of 3 or more times 0 % - 31.12.2022
0.7973 ex 9002 11 00 23 Lenses with: — motorized focus, zoom, aperture, — electronically switchable infrared cut filter, — an adjustable focal length not less than 2,7 mm and not more than 55 mm, — a weight of not more than 100 g, — a length of less than 70 mm, — a diameter of not more than 60 mm 0 % - 31.12.2025
0.7103 ex 9002 11 00 45 Infrared optical unit — with lenses of silicon, germanium or chalcogenide glass of a diameter not more than 62 mm (± 0,05 mm), — whether or not mounted on a machined aluminium alloy support of a kind used for thermal cameras or IP network cameras 0 % - 31.12.2026
0.3177 ex 9002 11 00 50 Lens unit: — having a focal length of 25 mm or more but not more than 150 mm, — consisting of glass or plastic lenses, with a diameter of 60 mm or more but not more than 190 mm 0 % - 31.12.2023
0.6572 ex 9002 11 00 85 Lens assembly with: — a horizontal field of view range of 20 deg or more, but not more than 200 deg, — a focal length of 1,16 mm or more, but not more than 20 mm, — a relative aperture of F/1,2 or more, but not more than F/4, and — a diameter of 5 mm or more, but not more than 40 mm, for use in the manufacture of cmOS automotive cameras or in IP network cameras production (1) 0 % - 31.12.2024
0.3140 ex 9002 90 00 30 Optical unit, comprising 1 or 2 rows of optical glass fibres in the form of lenses and with a diameter of 0,85 mm or more but not more than 1,15 mm, embedded between 2 plastic plates 0 % p/st 31.12.2023
0.5807 ex 9002 90 00 40 Mounted lenses made from infrared transmitting chalcogenide glass, or a combination of infrared transmitting chalcogenide glass and another lens material 0 % p/st 31.12.2022
0.5955 ex 9025 80 40 30 Electronic barometric semiconductor pressure sensor in a housing, mainly consisting of — a combination of one or more monolithic application-specific integrated circuits (ASIC) and — at least one or more microelectromechanical sensor elements (MEMS) manufactured with semiconductor technology, with mechanical components arranged in three-dimensional structures on the semiconductor material 0 % p/st 31.12.2023
0.6288 ex 9025 80 40 50 Electronic semiconductor sensor for measuring at least two of the following quantities: — Atmospheric pressure, temperature, (also for temperature compensation), humidity, or volatile organic compounds, — in a housing suitable for the automatic printing of conductor boards or Bare Die technology, containing : — one or more monolithic application-specific integrated circuits (ASIC), — one or more microelectromechanical sensor elements (MEMS) manufactured with semiconductor technology, with mechanical components arranged in three-dimensional structures on the semiconductor material, of a kind used for incorporation into products of Chapters 84-90 and 95 0 % p/st 31.12.2024
0.3292 ex 9032 89 00 30 Electronic controller of electric power steering (EPS controller) 0 % p/st 31.12.2023
0.4253 ex 9032 89 00 40 Digital valve controller for controlling liquids and gases 0 % p/st 31.12.2022
0.7004 ex 9032 89 00 50 Gas panel for regulating and controlling of the gas flow rate, working with plasma technology, comprising — an electronic mass flow regulator, suitable for receiving and sending of analogue and digital signals — four pressure transducers, — two or more pressure valves, — electric interfaces and — several connectors for gas lines — suitable for in-situ plasma bonding processes or for multi frequency bond activating processes 0 % - 31.12.2026
0.5025 ex 9401 99 90 10 Ratchet disk for use in the manufacture of reclining car seats (1) 0 % p/st 31.12.2025
0.4846 ex 9503 00 75 ex 9503 00 95 10 10 Plastic cable car scale models, whether or not with a motor, for printing (1) 0 % p/st 31.12.2025
0.6950 ex 9607 20 10 10 Sliders, narrow tape with mounted zipper teeth, pin/boxes and other parts of slide fasteners, of base metal for use in the manufacture of zippers (1) 0 % - 31.12.2022
0.6949 ex 9607 20 90 10 Narrow strips mounted with plastic chain scoops for use in the manufacture of zippers (1) 0 % - 31.12.2025
0.3286 ex 9608 91 00 10 Non-fibrous plastic pen-tips with an internal canal 0 % - 31.12.2023
0.3289 ex 9608 91 00 20 Felt tips and other porous-tips for markers, without internal canal 0 % - 31.12.2023
0.2737 ex 9612 10 10 10 Ribbons of plastic with segments of different colours, providing the penetration of dyes by heat into a support (so called dye-sublimation) 0 % - 31.12.2023
(1) Suspension of duties is subject to end-use customs supervision in accordance with Article 254 of Regulation (EU) No 952/2013. (2) However, the suspension of tariff duties does not apply where the processing is carried out by retail or catering undertakings. (3) Only the ad valorem duty is suspended. The specific duty shall continue to apply. (4) A surveillance of imports of goods covered by this tariff suspension shall be established in accordance with the procedure laid down in Articles 55 and 56 of Commission Implementing Regulation (EU) 2015/2447 of 24 November 2015 laying down detailed rules for implementing certain provisions of Regulation (EU) No 952/2013 of the European Parliament and of the Council laying down the Union Customs Code (OJ L 343, 29.12.2015, p. 558). (5) CUS (Customs Union and Statistics Number) is assigned to each ECICS record (product). ECICS (European Customs Inventory of Chemical Substances) is an information tool managed by the European Commission, General Directorate for Taxation and Customs Union. More information can be found via the following link: http://ec.europa.eu/taxation_customs/common/databases/ecics/index_en.htm.