Legalize / European Union / Implementing Regulation

Commission Implementing Regulation (EU) 2022/1267 of 20 July 2022 specifying the procedures for the designation of Union testing facilities for the purposes of market surveillance and verification of product compliance in accordance with Regulation (EU) 2019/1020 of the European Parliament and of the Council

Type Implementing Regulation

Publication 2022-07-21

State In force

Text As published

Department European Commission, GROW

Source EUR-Lex

articles 3

This is the act as published. Later amendments are not folded into the text below: each one is a separate act in this repository and an entry in this law's history.

Reform history JSON API


21.7.2022	EN	Official Journal of the European Union	L 192/21

THE EUROPEAN COMMISSION,

Having regard to the Treaty on the Functioning of the European Union,

Having regard to Regulation (EU) 2019/1020 of the European Parliament and of the Council of 20 June 2019 on market surveillance and compliance of products and amending Directive 2004/42/EC and Regulations (EC) No 765/2008 and (EU) No 305/2011 ¹, and in particular Article 21(9) thereof,

Whereas:

(1) One of the objectives of Union testing facilities is to assist the national market surveillance authorities in their activities by contributing to enhancing laboratory capacity for specific categories of products or for specific risks related to a category of products. The procedures for the designation of Union testing facilities should ensure in particular that Union testing facilities are designated where there is a shortage of laboratory testing capacity.

(2) In order to prevent a shortage of laboratory capacity, wide access to designation should be given. With a view to providing such access and in order to ensure transparency in the process leading to designation, it should be determined which public testing facilities of Member States are to be designated as Union testing facilities following calls for expression of interest.

(3) The designation of Commission testing facilities as Union testing facilities should be done by means of direct appointment by the Commission.

(4) Due to the high number of categories of products and of specific risks related to a category of products, the Union Product Compliance Network established under Article 29 of Regulation (EU) 2019/1020 should be consulted in order to ensure the correct prioritisation of such categories and specific risks.

(5) The designation of Union testing facilities should be reviewed on a regular basis in order to verify that they ensure a consistently high level of products testing, and that they provide technical and scientific advice of high quality.

(6) The measures provided for in this Regulation are in accordance with the opinion of the committee established by Article 43(1) of Regulation (EU) 2019/1020,

HAS ADOPTED THIS REGULATION:

Article 1

Procedures for the designation of the Union testing facilities

Public testing facilities of Member States shall be designated as Union testing facilities following a call for expression of interest, setting out the conditions for their designation.

Commission testing facilities shall be designated as Union testing facilities following a direct appointment from the Commission, setting out the conditions for their designation.

Prior to designation, the Union Product Compliance Network established under Article 29 of Regulation (EU) 2019/1020 (the ‘Network’) shall be consulted on both of the following:

(a) the specific categories of products and specific risks related to a category of products for which the Union testing facilities need to be designated;

(b) the conditions for the designation of the Union testing facilities, to ensure a consistently high level of product testing and high quality of technical and scientific advice.

Article 2

Review of the designation

The Commission, in consultation with the Network, shall review the designation of Union testing facilities on a regular basis in order to ascertain that Union testing facilities fulfil the conditions for their designation and the requirements set out in Articles 21(3), 21(5) and 21(6) of Regulation (EU) 2019/1020.

A time-limit for review of the designation of the Union testing facility shall be set out in the decision to designate the testing facility.

Where a Union testing facility fails to comply with the conditions for its designation and the requirements set out in Articles 21(3), 21(5) and 21(6) of Regulation (EU) 2019/1020, the Commission, after consultation with the Network, shall, where appropriate, withdraw the designation.

Article 3

Entry into force

This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.

This Regulation shall be binding in its entirety and directly applicable in all Member States.

Done at Brussels, 20 July 2022.

For the Commission

The President

Ursula VON DER LEYEN

OJ L 169, 25.6.2019, p. 1.

Reading this document does not replace reading the official text published in the Official Journal of the European Union. We assume no responsibility for any inaccuracies arising from the conversion of the original to this format.

This text is published under EUR-Lex's own terms of reuse, not a Legalize or public-domain licence. EUR-Lex
Creative Commons Attribution 4.0 International (CC BY 4.0)
© European Union, https://eur-lex.europa.eu — Source: EUR-Lex (Publications Office of the European Union). Reused under the Creative Commons Attribution 4.0 International (CC BY 4.0) licence. Only EU legislation published in the printed Official Journal of the European Union is deemed authentic; consolidated texts are reproduced here for documentation purposes and have been reformatted to Markdown.