Commission Implementing Regulation (EU) 2022/1525 of 13 September 2022 concerning the authorisation of L-lysine monohydrochloride and L-lysine sulphate produced by fermentation with Corynebacterium glutamicum CGMCC 14498 as feed additives for all animal species (Text with EEA relevance)

Type Implementing Regulation
Publication 2022-09-14
State In force
Text As published
Department European Commission, SANTE
Source EUR-Lex
articles 2

This is the act as published. Later amendments are not folded into the text below: each one is a separate act in this repository and an entry in this law's history.

Reform history JSON API
14.9.2022 EN Official Journal of the European Union L 237/12

THE EUROPEAN COMMISSION,

Having regard to the Treaty on the Functioning of the European Union,

Having regard to Regulation (EC) No 1831/2003 of the European Parliament and of the Council of 22 September 2003 on additives for use in animal nutrition 1, and in particular Article 9(2) thereof,

Whereas:

HAS ADOPTED THIS REGULATION:

Article 1

The substances specified in the Annex, belonging to the additive category ‘nutritional additives’ and to the functional group ‘amino acids, their salts and analogues’, are authorised as feed additives in animal nutrition subject to the conditions laid down in that Annex.

Article 2

This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.

This Regulation shall be binding in its entirety and directly applicable in all Member States.

Done at Brussels, 13 September 2022.

For the Commission

The President

Ursula VON DER LEYEN

2

EFSA Journal 2021;19(12):6980.

ANNEX

Identification number of the additive Name of the holder of authorisation Additive Composition, chemical formula, description, analytical method. Species or category of animal Maximum age Minimum content Maximum content Other provisions End of period of authorisation
Identification number of the additive Name of the holder of authorisation Additive Composition, chemical formula, description, analytical method. Species or category of animal Maximum age mg additive/kg of complete feed with a moisture content of 12 % mg additive/kg of complete feed with a moisture content of 12 % Other provisions End of period of authorisation
Category of nutritional additives. Functional group: amino acids, their salts and analogues. Category of nutritional additives. Functional group: amino acids, their salts and analogues. Category of nutritional additives. Functional group: amino acids, their salts and analogues. Category of nutritional additives. Functional group: amino acids, their salts and analogues. Category of nutritional additives. Functional group: amino acids, their salts and analogues. Category of nutritional additives. Functional group: amino acids, their salts and analogues. Category of nutritional additives. Functional group: amino acids, their salts and analogues. Category of nutritional additives. Functional group: amino acids, their salts and analogues. Category of nutritional additives. Functional group: amino acids, their salts and analogues. Category of nutritional additives. Functional group: amino acids, their salts and analogues.
3c322iii - L-lysine monohydrochloride Additive composition Preparation of L-lysine monohydrochloride with a minimum of 78,8 % L-lysine and with a moisture ≤ 1 % Powder form All species - - - 1. The L-lysine content shall be indicated on the labelling of the additive. 2. The additive can be used via water for drinking. 3. Declarations to be made on the labelling of the additive and premixtures: ‘The supplementation with L-lysine, in particular via water for drinking, should take into account all essential and conditionally essential amino acids in order to avoid imbalances.’ 4. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, eye or dermal contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including eyes, skin and breathing protection. 4.10.2032
3c322iii - L-lysine monohydrochloride Characterisation of the active substance L-lysine monohydrochloride produced by fermentation with Corynebacterium glutamicum CGMCC 14498 Chemical formula: C6H15ClN2O2 CAS Number: 657-27-2 Analytical methods 3 For the identification of L-lysine monohydrochloride in the feed additive: — Food Chemical Codex ‘L-lysine monohydrochloride monograph’ For the quantification of lysine in the feed additive and premixtures containing more than 10 % lysine: — ion exchange chromatography coupled with post-column derivatisation and optical detection (IEC-VIS/FLD) – EN ISO 17180. For the quantification of lysine in premixtures, compound feed and feed materials: — ion exchange chromatography coupled with post-column derivatisation and optical detection (IEC-VIS), Commission Regulation (EC) No 152/2009 (Annex III, F). For the quantification of lysine in water: — ion exchange chromatography coupled with post-column derivatisation and optical detection (IEC-VIS or IEC-VIS/FLD). All species - - - 1. The L-lysine content shall be indicated on the labelling of the additive. 2. The additive can be used via water for drinking. 3. Declarations to be made on the labelling of the additive and premixtures: ‘The supplementation with L-lysine, in particular via water for drinking, should take into account all essential and conditionally essential amino acids in order to avoid imbalances.’ 4. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, eye or dermal contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including eyes, skin and breathing protection. 4.10.2032
3c328 L-lysine sulphate Additive composition Preparation of L-lysine sulphate with a minimum content of 73,0 % (L-lysine ≥ 55,0 % and other amino acids ≥ 10 %) Powder form All species - - 10 000 1. The L-lysine content shall be indicated on the labelling of the additive. 2. The additive can be used via water for drinking. 3. Declarations to be made on the labelling of the additive and premixtures: ‘The supplementation with L-lysine, in particular via water for drinking, should take into account all essential and conditionally essential amino acids in order to avoid imbalances.’ 4. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, eye or dermal contact. Where those risks cannot be eliminated or reduced to a minimum level by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including eyes, skin and breathing protection. 4.10.2032
3c328 L-lysine sulphate Characterisation of the active substance L-lysine sulphate produced by fermentation with Corynebacterium glutamicum CGMCC 14498 Chemical formula: [C6H14N2O2]2 SO4 CAS number: 60343-69-3 All species - - 10 000 1. The L-lysine content shall be indicated on the labelling of the additive. 2. The additive can be used via water for drinking. 3. Declarations to be made on the labelling of the additive and premixtures: ‘The supplementation with L-lysine, in particular via water for drinking, should take into account all essential and conditionally essential amino acids in order to avoid imbalances.’ 4. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, eye or dermal contact. Where those risks cannot be eliminated or reduced to a minimum level by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including eyes, skin and breathing protection. 4.10.2032
3c328 L-lysine sulphate Analytical methods 3 For the quantification of lysine in the feed additive and premixtures containing more than 10 % lysine: — ion exchange chromatography coupled with post-column derivatisation and photometric detection (IEC-VIS/FLD) – EN ISO 17180 For the identification of sulphate in the feed additive: — European Pharmacopoeia Monograph 20301 For the quantification of lysine in premixtures, compound feed and feed materials: — ion exchange chromatography coupled with post-column derivatisation and photometric detection (IEC-VIS) – Commission Regulation (EC) No 152/2009 (Annex III, F). All species - - 10 000 1. The L-lysine content shall be indicated on the labelling of the additive. 2. The additive can be used via water for drinking. 3. Declarations to be made on the labelling of the additive and premixtures: ‘The supplementation with L-lysine, in particular via water for drinking, should take into account all essential and conditionally essential amino acids in order to avoid imbalances.’ 4. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, eye or dermal contact. Where those risks cannot be eliminated or reduced to a minimum level by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including eyes, skin and breathing protection. 4.10.2032
3

Details of the analytical methods are available at the following address of the Reference Laboratory: https://joint-research-centre.ec.europa.eu/eurl-fa-eurl-feed-additives/eurl-fa-authorisation/eurl-fa-evaluation-reports_en

Reading this document does not replace reading the official text published in the Official Journal of the European Union. We assume no responsibility for any inaccuracies arising from the conversion of the original to this format.

This text is published under EUR-Lex's own terms of reuse, not a Legalize or public-domain licence. EUR-Lex
Creative Commons Attribution 4.0 International (CC BY 4.0)
© European Union, https://eur-lex.europa.eu — Source: EUR-Lex (Publications Office of the European Union). Reused under the Creative Commons Attribution 4.0 International (CC BY 4.0) licence. Only EU legislation published in the printed Official Journal of the European Union is deemed authentic; consolidated texts are reproduced here for documentation purposes and have been reformatted to Markdown.