LegalizeCommission Implementing Regulation (EU) 2023/565 of 10 March 2023 concerning the authorisation of ethyl heptanoate, ethyl 2-methylbutyrate, isopentyl acetate, 3-methylbutyl 3-methylbutyrate, 2-methylpropionic acid, 3-methylbutyl butyrate, 2-methylbutyl acetate, hex-2-en-1-ol, hex-2(trans)-enal, allyl hexanoate, allyl heptanoate, linalool, 2-methyl-1-phenylpropan-2-ol, alpha-ionone, beta-damascone, nootkatone, beta-ionone, alpha-irone, beta-damascenone, (E)-beta-damascone, pentadecano-1,15-lactone, 2-phenylethan-1-ol, phenethyl isovalerate, 4-(p-hydroxyphenyl)butan-2-one, 2-methoxynaphthalene, 2-isopropyl-4-methylthiazole and valencene as feed additives for all animal species (Text with EEA relevance)
This is the act as published. Later amendments are not folded into the text below: each one is a separate act in this repository and an entry in this law's history.
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | Minimum content | Maximum content | Other provisions | End of period of authorisation |
|---|---|---|---|---|---|---|---|---|
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | mg of additive/kg of complete feedingstuff with a moisture content of 12% | mg of additive/kg of complete feedingstuff with a moisture content of 12% | Other provisions | End of period of authorisation |
| Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds |
| 2b09093 | Ethyl heptanoate | Additive composition Ethyl heptanoate Characterisation of active substance Ethyl heptanoate Produced by chemical synthesis Purity: min. 98% Chemical formula: C9H18O2 CAS number: 106-30-9 FLAVIS: 09.093 | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12%: 32 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including skin, eye and breathing protection. | 2 April 2033 |
| 2b09093 | Ethyl heptanoate | Analytical method 16 For the determination of ethyl heptanoate in the feed additive and in feed flavouring premixtures: — Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12%: 32 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including skin, eye and breathing protection. | 2 April 2033 |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | Minimum content | Maximum content | Other provisions | End of period of authorisation |
| --- | --- | --- | --- | --- | --- | --- | --- | --- |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | mg of additive/kg of complete feedingstuff with a moisture content of 12% | mg of additive/kg of complete feedingstuff with a moisture content of 12% | Other provisions | End of period of authorisation |
| Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds |
| 2b09409 | Ethyl 2-methylbutyrate | Additive composition Ethyl 2-methylbutyrate Characterisation of active substance Ethyl 2-methylbutyrate Produced by chemical synthesis Purity: min. 95% Chemical formula: C7H14O2 CAS number: 7452-79-1 FLAVIS: 09.409 | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12%: 25 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including skin, eye and breathing protection. | 2 April 2033 |
| 2b09409 | Ethyl 2-methylbutyrate | Analytical method 17 For the determination of ethyl 2-methylbutyrate in the feed additive and in feed flavouring premixtures: — Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12%: 25 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including skin, eye and breathing protection. | 2 April 2033 |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | Minimum content | Maximum content | Other provisions | End of period of authorisation |
| --- | --- | --- | --- | --- | --- | --- | --- | --- |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | mg of additive/kg of complete feedingstuff with a moisture content of 12% | mg of additive/kg of complete feedingstuff with a moisture content of 12% | Other provisions | End of period of authorisation |
| Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds |
| 2b09024 | Isopentyl acetate | Additive composition Isopentyl acetate Characterisation of active substance Isopentyl acetate Produced by chemical synthesis Purity: min. 95% Chemical formula: C7H14O2 CAS number: 123-92-2 FLAVIS: 09.024 | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12%: 125 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including skin, eye and breathing protection. | 2 April 2033 |
| 2b09024 | Isopentyl acetate | Analytical method 18 For the determination of isopentyl acetate in the feed additive and in feed flavouring premixtures: — Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12%: 125 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including skin, eye and breathing protection. | 2 April 2033 |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | Minimum content | Maximum content | Other provisions | End of period of authorisation |
| --- | --- | --- | --- | --- | --- | --- | --- | --- |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | mg of additive/kg of complete feedingstuff with a moisture content of 12% | mg of additive/kg of complete feedingstuff with a moisture content of 12% | Other provisions | End of period of authorisation |
| Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds |
| 2b09463 | 3-Methylbutyl 3-methylbutyrate | Additive composition 3-Methylbutyl 3-methylbutyrate Characterisation of active substance 3-Methylbutyl 3-methylbutyrate Produced by chemical synthesis Purity: min. 98% Chemical formula: C10H20O2 CAS number: 659-70-1 FLAVIS: 09.463 | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12%: 25 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including skin, eye and breathing protection. | 2 April 2033 |
| 2b09463 | 3-Methylbutyl 3-methylbutyrate | Analytical method 19 For the determination of 3-methylbutyl 3-methylbutyrate in the feed additive and in feed flavouring premixtures: — Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12%: 25 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including skin, eye and breathing protection. | 2 April 2033 |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | Minimum content | Maximum content | Other provisions | End of period of authorisation |
| --- | --- | --- | --- | --- | --- | --- | --- | --- |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | mg of additive/kg of complete feedingstuff with a moisture content of 12% | mg of additive/kg of complete feedingstuff with a moisture content of 12% | Other provisions | End of period of authorisation |
| Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds |
| 2b08006 | 2-Methylpropionic acid | Additive composition 2-Methylpropionic acid Characterisation of active substance 2-Methylpropionic acid Produced by chemical synthesis Purity: min. 99% Chemical formula: C4H8O2 CAS number: 79-31-2 FLAVIS: 08.006 | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12%: 25 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including skin, eye and breathing protection. | 2 April 2033 |
| 2b08006 | 2-Methylpropionic acid | Analytical method 20 For the determination of 2-methylpropionic acid in the feed additive and in feed flavouring premixtures: — Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12%: 25 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including skin, eye and breathing protection. | 2 April 2033 |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | Minimum content | Maximum content | Other provisions | End of period of authorisation |
| --- | --- | --- | --- | --- | --- | --- | --- | --- |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | mg of additive/kg of complete feedingstuff with a moisture content of 12% | mg of additive/kg of complete feedingstuff with a moisture content of 12% | Other provisions | End of period of authorisation |
| Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds |
| 2b09055 | 3-Methylbutyl butyrate | Additive composition 3-Methylbutyl butyrate Characterisation of active substance 3-Methylbutyl butyrate Produced by chemical synthesis Purity: min. 98% Chemical formula: C9H18O2 CAS number: 106-27-4 FLAVIS: 09.055 | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12%: 25 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including skin, eye and breathing protection. | 2 April 2033 |
| 2b09055 | 3-Methylbutyl butyrate | Analytical method 21 For the determination of 3-methylbutyl butyrate in the feed additive and in feed flavouring premixtures: — Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12%: 25 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including skin, eye and breathing protection. | 2 April 2033 |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | Minimum content | Maximum content | Other provisions | End of period of authorisation |
| --- | --- | --- | --- | --- | --- | --- | --- | --- |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | mg of additive/kg of complete feedingstuff with a moisture content of 12% | mg of additive/kg of complete feedingstuff with a moisture content of 12% | Other provisions | End of period of authorisation |
| Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds |
| 2b09286 | 2-Methylbutyl acetate | Additive composition 2-Methylbutyl acetate Characterisation of active substance 2-Methylbutyl acetate Produced by chemical synthesis Purity: min. 99% Chemical formula: C7H14O2 CAS number: 624-41-9 FLAVIS: 09.286 | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12%: 25 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including skin, eye and breathing protection. | 2 April 2033 |
| 2b09286 | 2-Methylbutyl acetate | Analytical method 22 For the determination of 2-methylbutyl acetate in the feed additive and in feed flavouring premixtures: — Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12%: 25 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including skin, eye and breathing protection. | 2 April 2033 |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | Minimum content | Maximum content | Other provisions | End of period of authorisation |
| --- | --- | --- | --- | --- | --- | --- | --- | --- |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | mg of additive/kg of complete feedingstuff with a moisture content of 12% | mg of additive/kg of complete feedingstuff with a moisture content of 12% | Other provisions | End of period of authorisation |
| Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds |
| 2b02020 | Hex-2-en-1-ol | Additive composition Hex-2-en-1-ol Characterisation of active substance Hex-2-en-1-ol Produced by chemical synthesis Purity: min. 95% Chemical formula: C6H12O CAS number: 2305-21-7 FLAVIS: 02.020 | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12%: 5 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including skin, eye and breathing protection. | 2 April 2033 |
| 2b02020 | Hex-2-en-1-ol | Analytical method 23 For the determination of hex-2-en-1-ol in the feed additive and in feed flavouring premixtures: — Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12%: 5 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including skin, eye and breathing protection. | 2 April 2033 |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | Minimum content | Maximum content | Other provisions | End of period of authorisation |
| --- | --- | --- | --- | --- | --- | --- | --- | --- |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | mg of additive/kg of complete feedingstuff with a moisture content of 12% | mg of additive/kg of complete feedingstuff with a moisture content of 12% | Other provisions | End of period of authorisation |
| Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds |
| 2b05073 | Hex-2(trans)-enal | Additive composition Hex-2(trans)-enal Characterisation of active substance Hex-2(trans)-enal Produced by chemical synthesis Purity: min. 92% Chemical formula: C6H10O CAS number: 6728-26-3 FLAVIS: 05.073 | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12%: 5 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including skin, eye and breathing protection. | 2 April 2033 |
| 2b05073 | Hex-2(trans)-enal | Analytical method 24 For the determination of hex-2(trans)-enal in the feed additive and in feed flavouring premixtures: — Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12%: 5 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including skin, eye and breathing protection. | 2 April 2033 |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | Minimum content | Maximum content | Other provisions | End of period of authorisation |
| --- | --- | --- | --- | --- | --- | --- | --- | --- |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | mg of additive/kg of complete feedingstuff with a moisture content of 12% | mg of additive/kg of complete feedingstuff with a moisture content of 12% | Other provisions | End of period of authorisation |
| Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds |
| 2b09244 | Allyl hexanoate | Additive composition Allyl hexanoate Characterisation of active substance Allyl hexanoate Produced by chemical synthesis Purity: min. 98% Chemical formula: C9H16O2 CAS number: 123-68-2 FLAVIS: 09.244 | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12%: 5 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including skin, eye and breathing protection. | 2 April 2033 |
| 2b09244 | Allyl hexanoate | Analytical method 25 For the determination of allyl hexanoate in the feed additive and in feed flavouring premixtures: — Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12%: 5 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including skin, eye and breathing protection. | 2 April 2033 |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | Minimum content | Maximum content | Other provisions | End of period of authorisation |
| --- | --- | --- | --- | --- | --- | --- | --- | --- |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | mg of additive/kg of complete feedingstuff with a moisture content of 12% | mg of additive/kg of complete feedingstuff with a moisture content of 12% | Other provisions | End of period of authorisation |
| Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds |
| 2b09097 | Allyl heptanoate | Additive composition Allyl heptanoate Characterisation of active substance Allyl heptanoate Produced by chemical synthesis Purity: min. 97% Chemical formula: C10H18O2 CAS number: 142-19-8 FLAVIS: 09.097 | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12%: 5 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by swallow, inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including skin, eye and breathing protection. | 2 April 2033 |
| 2b09097 | Allyl heptanoate | Analytical method 26 For the determination of allyl heptanoate in the feed additive and in feed flavouring premixtures: — Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12%: 5 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by swallow, inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including skin, eye and breathing protection. | 2 April 2033 |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | Minimum content | Maximum content | Other provisions | End of period of authorisation |
| --- | --- | --- | --- | --- | --- | --- | --- | --- |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | mg of additive/kg of complete feedingstuff with a moisture content of 12% | mg of additive/kg of complete feedingstuff with a moisture content of 12% | Other provisions | End of period of authorisation |
| Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds |
| 2b02013 | Linalool | Additive composition Linalool Characterisation of active substance Linalool Produced by chemical synthesis or by fractional distillation and subsequent rectification from the oils of Cajenne rosewood, Brazil rosewood, Mexican linaloe, shiu and coriander seeds. Purity: min. 95% Chemical formula: C10H18O CAS number: 78-70-6 FLAVIS: 02.013 | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12%: 30 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including skin, eye and breathing protection. | 2 April 2033 |
| 2b02013 | Linalool | Analytical method 27 For the determination of linalool in the feed additive and in feed flavouring premixtures: — Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12%: 30 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including skin, eye and breathing protection. | 2 April 2033 |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | Minimum content | Maximum content | Other provisions | End of period of authorisation |
| --- | --- | --- | --- | --- | --- | --- | --- | --- |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | mg of additive/kg of complete feedingstuff with a moisture content of 12% | mg of additive/kg of complete feedingstuff with a moisture content of 12% | Other provisions | End of period of authorisation |
| Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds |
| 2b02035 | 2-Methyl-1-phenylpropan-2-ol | Additive composition 2-Methyl-1-phenylpropan-2-ol Characterisation of active substance 2-Methyl-1-phenylpropan-2-ol Produced by chemical synthesis Purity: min. 97% Chemical formula: C10H14O CAS number: 100-86-7 FLAVIS: 02.035 | All animals species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12%: — animals farmed in marine aquaculture systems: 0.05 mg; — animals farmed in land-based aquaculture systems: 5 mg; — other species or categories of animals: 5 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. On the label of premixtures, of feed materials and of compound feed intended for aquatic species, the following shall be indicated, where applicable: — ‘Intended for animals farmed in marine aquaculture systems’. — ‘Intended for animals farmed in land-based aquaculture systems’ 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including skin, eye and breathing protection. | 2 April 2033 |
| 2b02035 | 2-Methyl-1-phenylpropan-2-ol | Analytical method 28 For the determination of 2-methyl-1-phenylpropan-2-ol in the feed additive and in feed flavouring premixtures: — Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. | All animals species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12%: — animals farmed in marine aquaculture systems: 0.05 mg; — animals farmed in land-based aquaculture systems: 5 mg; — other species or categories of animals: 5 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. On the label of premixtures, of feed materials and of compound feed intended for aquatic species, the following shall be indicated, where applicable: — ‘Intended for animals farmed in marine aquaculture systems’. — ‘Intended for animals farmed in land-based aquaculture systems’ 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including skin, eye and breathing protection. | 2 April 2033 |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | Minimum content | Maximum content | Other provisions | End of period of authorisation |
| --- | --- | --- | --- | --- | --- | --- | --- | --- |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | mg of additive/kg of complete feedingstuff with a moisture content of 12% | mg of additive/kg of complete feedingstuff with a moisture content of 12% | Other provisions | End of period of authorisation |
| Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds |
| 2b07007 | alpha-Ionone | Additive composition alpha-Ionone Characterisation of active substance alpha-Ionone Produced by chemical synthesis Purity: min. > 85% Chemical formula: C13H20O CAS number: 127-41-3 FLAVIS: 07.007 | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12%: 25 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including skin, eye and breathing protection. | 2 April 2033 |
| 2b07007 | alpha-Ionone | Analytical method 29 For the determination of alpha-ionone in the feed additive and in feed flavouring premixtures: — Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12%: 25 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including skin, eye and breathing protection. | 2 April 2033 |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | Minimum content | Maximum content | Other provisions | End of period of authorisation |
| --- | --- | --- | --- | --- | --- | --- | --- | --- |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | mg of additive/kg of complete feedingstuff with a moisture content of 12% | mg of additive/kg of complete feedingstuff with a moisture content of 12% | Other provisions | End of period of authorisation |
| Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds |
| 2b07083 | beta-Damascone | Additive composition beta-Damascone Characterisation of active substance beta-Damascone Produced by chemical synthesis Purity: min. > 90% Chemical formula: C13H20O CAS number: 23726-92-3 FLAVIS: 07.083 | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12%: — animals farmed in marine aquaculture systems: 0.05 mg; — animals farmed in land-based aquaculture systems: 5 mg — other species or categories of animals: 5 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. On the label of premixtures, of feed materials and of compound feed intended for aquatic species, the following shall be indicated, where applicable: — ‘Intended for animals farmed in marine aquaculture systems’ — ‘Intended for animals farmed in land-based aquaculture systems’ 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including skin, eye and breathing protection. | 2 April 2033 |
| 2b07083 | beta-Damascone | Analytical method 30 For the determination of beta-damascone in the feed additive and in feed flavouring premixtures: — Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12%: — animals farmed in marine aquaculture systems: 0.05 mg; — animals farmed in land-based aquaculture systems: 5 mg — other species or categories of animals: 5 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. On the label of premixtures, of feed materials and of compound feed intended for aquatic species, the following shall be indicated, where applicable: — ‘Intended for animals farmed in marine aquaculture systems’ — ‘Intended for animals farmed in land-based aquaculture systems’ 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including skin, eye and breathing protection. | 2 April 2033 |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | Minimum content | Maximum content | Other provisions | End of period of authorisation |
| --- | --- | --- | --- | --- | --- | --- | --- | --- |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | mg of additive/kg of complete feedingstuff with a moisture content of 12% | mg of additive/kg of complete feedingstuff with a moisture content of 12% | Other provisions | End of period of authorisation |
| Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds |
| 2b07089 | Nootkatone | Additive composition Nootkatone Characterisation of active substance Nootkatone Produced by chemical synthesis Purity: min. > 93% Chemical formula: C15H22O CAS number: 4674-50-4 FLAVIS: 07.089 | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12%: 5 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including skin, eye and breathing protection. | 2 April 2033 |
| 2b07089 | Nootkatone | Analytical method 31 For the determination of nootkatone in the feed additive and in feed flavouring premixtures: — Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12%: 5 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including skin, eye and breathing protection. | 2 April 2033 |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | Minimum content | Maximum content | Other provisions | End of period of authorisation |
| --- | --- | --- | --- | --- | --- | --- | --- | --- |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | mg of additive/kg of complete feedingstuff with a moisture content of 12% | mg of additive/kg of complete feedingstuff with a moisture content of 12% | Other provisions | End of period of authorisation |
| Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds |
| 2b07008 | beta-Ionone | Additive composition beta-Ionone Characterisation of active substance beta-Ionone Produced by chemical synthesis Purity: min. > 95% Chemical formula: C13H20O CAS number: 14901-07-6 FLAVIS: 07.008 | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12%: — salmonids, veal calves and dogs: 5 mg; — other species or categories of animals: 1 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including skin, eye and breathing protection. | 2 April 2033 |
| 2b07008 | beta-Ionone | Analytical method 32 For the determination of beta-ionone in the feed additive and in feed flavouring premixtures: — Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12%: — salmonids, veal calves and dogs: 5 mg; — other species or categories of animals: 1 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including skin, eye and breathing protection. | 2 April 2033 |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | Minimum content | Maximum content | Other provisions | End of period of authorisation |
| --- | --- | --- | --- | --- | --- | --- | --- | --- |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | mg of additive/kg of complete feedingstuff with a moisture content of 12% | mg of additive/kg of complete feedingstuff with a moisture content of 12% | Other provisions | End of period of authorisation |
| Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds |
| 2b07011 | alpha-Irone | Additive composition alpha-Irone Characterisation of active substance alpha-Irone Produced by chemical synthesis Purity: min. > 98% Chemical formula: C14H22O CAS number: 79-69-6 FLAVIS: 07.011 | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12%: — animals farmed in marine aquaculture systems: 0.05 mg; — animals farmed in land-based aquaculture systems: 5 mg; — other species or categories of animals: 5 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. On the label of premixtures, of feed materials and of compound feed intended for aquatic species, the following shall be indicated, where applicable: — ‘Intended for animals farmed in marine aquaculture systems’ — ‘Intended for animals farmed in land-based aquaculture systems’ 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including skin, eye and breathing protection. | 2 April 2033 |
| 2b07011 | alpha-Irone | Analytical method 33 For the determination of alpha-irone in the feed additive and in feed flavouring premixtures: — Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12%: — animals farmed in marine aquaculture systems: 0.05 mg; — animals farmed in land-based aquaculture systems: 5 mg; — other species or categories of animals: 5 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. On the label of premixtures, of feed materials and of compound feed intended for aquatic species, the following shall be indicated, where applicable: — ‘Intended for animals farmed in marine aquaculture systems’ — ‘Intended for animals farmed in land-based aquaculture systems’ 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including skin, eye and breathing protection. | 2 April 2033 |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | Minimum content | Maximum content | Other provisions | End of period of authorisation |
| --- | --- | --- | --- | --- | --- | --- | --- | --- |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | mg of additive/kg of complete feedingstuff with a moisture content of 12% | mg of additive/kg of complete feedingstuff with a moisture content of 12% | Other provisions | End of period of authorisation |
| Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds |
| 2b07108 | beta-Damascenone | Additive composition beta-Damascenone Characterisation of active substance beta-Damascenone Produced by chemical synthesis Purity: min. > 98% Chemical formula: C13H18O CAS number: 23696-85-7 FLAVIS: 07.108 | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12%: — cattle for fattening, salmonids and non-food producing animals: 1.5 mg; — other species and categories: 1 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including skin, eye and breathing protection. | 2 April 2033 |
| 2b07108 | beta-Damascenone | Analytical method 34 For the determination of beta-damascenone in the feed additive and in feed flavouring premixtures: — Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12%: — cattle for fattening, salmonids and non-food producing animals: 1.5 mg; — other species and categories: 1 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including skin, eye and breathing protection. | 2 April 2033 |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | Minimum content | Maximum content | Other provisions | End of period of authorisation |
| --- | --- | --- | --- | --- | --- | --- | --- | --- |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | mg of additive/kg of complete feedingstuff with a moisture content of 12% | mg of additive/kg of complete feedingstuff with a moisture content of 12% | Other provisions | End of period of authorisation |
| Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds |
| 2b07224 | (E)-beta-Damascone | Additive composition (E)-beta-Damascone Characterisation of active substance (E)-beta-Damascone Produced by chemical synthesis Purity: min. > 90% Chemical formula: C13H20O CAS number: 23726-91-2 FLAVIS: 07.224 | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12%: — animals farmed in marine aquaculture systems: 0.05 mg; — animals farmed in land-based aquaculture systems: 5 mg; — other species or categories of animals: 5 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. On the label of premixtures, of feed materials and of compound feed intended for aquatic species, the following shall be indicated, where applicable: — ‘Intended for animals farmed in marine aquaculture systems’ — ‘Intended for animals farmed in land-based aquaculture systems’ 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including skin, eye and breathing protection. | 2 April 2033 |
| 2b07224 | (E)-beta-Damascone | Analytical method 35 For the determination of (E)-beta-damascone in the feed additive and in feed flavouring premixtures: — Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12%: — animals farmed in marine aquaculture systems: 0.05 mg; — animals farmed in land-based aquaculture systems: 5 mg; — other species or categories of animals: 5 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. On the label of premixtures, of feed materials and of compound feed intended for aquatic species, the following shall be indicated, where applicable: — ‘Intended for animals farmed in marine aquaculture systems’ — ‘Intended for animals farmed in land-based aquaculture systems’ 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including skin, eye and breathing protection. | 2 April 2033 |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | Minimum content | Maximum content | Other provisions | End of period of authorisation |
| --- | --- | --- | --- | --- | --- | --- | --- | --- |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | mg of additive/kg of complete feedingstuff with a moisture content of 12% | mg of additive/kg of complete feedingstuff with a moisture content of 12% | Other provisions | End of period of authorisation |
| Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds |
| 2b10004 | Pentadecano-1,15-lactone | Additive composition Pentadecano-1,15-lactone Characterisation of active substance Pentadecano-1,15-lactone Produced by chemical synthesis Purity: min. 98% Chemical formula: C15H28O2 CAS number: 106-02-5 FLAVIS: 10.004 | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12%: 10 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including skin, eye and breathing protection. | 2 April 2033 |
| 2b10004 | Pentadecano-1,15-lactone | Analytical method 36 For the determination of pentadecano-1,15-lactone in the feed additive and in feed flavouring premixtures: — Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12%: 10 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including skin, eye and breathing protection. | 2 April 2033 |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | Minimum content | Maximum content | Other provisions | End of period of authorisation |
| --- | --- | --- | --- | --- | --- | --- | --- | --- |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | mg of additive/kg of complete feedingstuff with a moisture content of 12% | mg of additive/kg of complete feedingstuff with a moisture content of 12% | Other provisions | End of period of authorisation |
| Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds |
| 2b02019 | 2-Phenylethan-1-ol | Additive composition 2-Phenylethan-1-ol Characterisation of active substance 2-Phenylethan-1-ol Produced by chemical synthesis Purity: min. 98% Chemical formula: C8H10O CAS number: 60-12-8 FLAVIS: 02.019 | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12%: 25 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including skin, eye and breathing protection. | 2 April 2033 |
| 2b02019 | 2-Phenylethan-1-ol | Analytical method 37 For the determination of 2-phenylethan-1-ol in the feed additive and in feed flavouring premixtures: — Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12%: 25 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including skin, eye and breathing protection. | 2 April 2033 |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | Minimum content | Maximum content | Other provisions | End of period of authorisation |
| --- | --- | --- | --- | --- | --- | --- | --- | --- |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | mg of additive/kg of complete feedingstuff with a moisture content of 12% | mg of additive/kg of complete feedingstuff with a moisture content of 12% | Other provisions | End of period of authorisation |
| Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds |
| 2b09466 | Phenethyl isovalerate | Additive composition Phenethyl isovalerate Characterisation of active substance Phenethyl isovalerate Produced by chemical synthesis Purity: min. > 97% Chemical formula: C13H18O2 CAS number: 140-26-1 FLAVIS: 09.466 | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12%: — animals farmed in marine aquaculture systems: 0.05 mg; — animals farmed in land-based aquaculture systems: 30 mg; — other species or categories of animals: 30 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. On the label of premixtures, of feed materials and of compound feed intended for aquatic species, the following shall be indicated, where applicable: — ‘Intended for animals farmed in marine aquaculture systems’ — ‘Intended for animals farmed in land-based aquaculture systems’ 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including skin, eye and breathing protection. | 2 April 2033 |
| 2b09466 | Phenethyl isovalerate | Analytical method 38 For the determination of phenethyl isovalerate in the feed additive and in feed flavouring premixtures: — Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12%: — animals farmed in marine aquaculture systems: 0.05 mg; — animals farmed in land-based aquaculture systems: 30 mg; — other species or categories of animals: 30 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. On the label of premixtures, of feed materials and of compound feed intended for aquatic species, the following shall be indicated, where applicable: — ‘Intended for animals farmed in marine aquaculture systems’ — ‘Intended for animals farmed in land-based aquaculture systems’ 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including skin, eye and breathing protection. | 2 April 2033 |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | Minimum content | Maximum content | Other provisions | End of period of authorisation |
| --- | --- | --- | --- | --- | --- | --- | --- | --- |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | mg of additive/kg of complete feedingstuff with a moisture content of 12% | mg of additive/kg of complete feedingstuff with a moisture content of 12% | Other provisions | End of period of authorisation |
| Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds |
| 2b07055 | 4-(p-Hydroxyphenyl)butan-2-one | Additive composition 4-(p-Hydroxyphenyl)butan-2-one Characterisation of active substance 4-(p-Hydroxyphenyl)butan-2-one Produced by chemical synthesis Purity: min. > 96% Chemical formula: C10H12O2 CAS number: 5471-51-2 FLAVIS: 07.055 | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12%: — animals farmed in marine aquaculture systems: 0.05 mg; — animals farmed in land-based aquaculture systems: 25 mg — other species or categories of animals: 25 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. On the label of premixtures, of feed materials and of compound feed intended for aquatic species, the following shall be indicated, where applicable: — ‘Intended for animals farmed in marine aquaculture systems’ — ‘Intended for animals farmed in land-based aquaculture systems’ 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including skin, eye and breathing protection. | 2 April 2033 |
| 2b07055 | 4-(p-Hydroxyphenyl)butan-2-one | Analytical method 39 For the determination of 4-(p-hydroxyphenyl)butan-2-one in the feed additive and in feed flavouring premixtures: — Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12%: — animals farmed in marine aquaculture systems: 0.05 mg; — animals farmed in land-based aquaculture systems: 25 mg — other species or categories of animals: 25 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. On the label of premixtures, of feed materials and of compound feed intended for aquatic species, the following shall be indicated, where applicable: — ‘Intended for animals farmed in marine aquaculture systems’ — ‘Intended for animals farmed in land-based aquaculture systems’ 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including skin, eye and breathing protection. | 2 April 2033 |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | Minimum content | Maximum content | Other provisions | End of period of authorisation |
| --- | --- | --- | --- | --- | --- | --- | --- | --- |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | mg of additive/kg of complete feedingstuff with a moisture content of 12% | mg of additive/kg of complete feedingstuff with a moisture content of 12% | Other provisions | End of period of authorisation |
| Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds |
| 2b04074 | 2-Methoxynaphthalene | Additive composition 2-Methoxynaphthalene Characterisation of active substance 2-Methoxynaphthalene Produced by chemical synthesis Purity: min. 99% Chemical formula: C11H10O CAS number: 93-04-9 FLAVIS: 04.074 | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12%: 1.2 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including skin, eye and breathing protection. | 2 April 2033 |
| 2b04074 | 2-Methoxynaphthalene | Analytical method 40 For the determination of 2-methoxynaphthalene in the feed additive and in feed flavouring premixtures: — Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12%: 1.2 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including skin, eye and breathing protection. | 2 April 2033 |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | Minimum content | Maximum content | Other provisions | End of period of authorisation |
| --- | --- | --- | --- | --- | --- | --- | --- | --- |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | mg of additive/kg of complete feedingstuff with a moisture content of 12% | mg of additive/kg of complete feedingstuff with a moisture content of 12% | Other provisions | End of period of authorisation |
| Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds |
| 2b15026 | 2-Isopropyl-4-methylthiazole | Additive composition 2-Isopropyl-4-methylthiazole Characterisation of active substance 2-Isopropyl-4-methylthiazole Produced by chemical synthesis Purity: min. 96% Chemical formula: C7H11NS CAS number: 15679-13-7 FLAVIS: 15.026 | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12%: — animals farmed in marine aquaculture systems: 0.05 mg; — animals farmed in land-based aquaculture systems:1.5mg — other species or categories of animals: 1.5 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. On the label of premixtures, of feed materials and of compound feed intended for aquatic species, the following shall be indicated, where applicable: — ‘Intended for animals farmed in marine aquaculture systems’ — ‘Intended for animals farmed in land-based aquaculture systems’ 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including skin, eye and breathing protection. | 2 April 2033 |
| 2b15026 | 2-Isopropyl-4-methylthiazole | Analytical method 41 For the determination of 2-isopropyl-4-methylthiazole in the feed additive and in feed flavouring premixtures: — Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12%: — animals farmed in marine aquaculture systems: 0.05 mg; — animals farmed in land-based aquaculture systems:1.5mg — other species or categories of animals: 1.5 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. On the label of premixtures, of feed materials and of compound feed intended for aquatic species, the following shall be indicated, where applicable: — ‘Intended for animals farmed in marine aquaculture systems’ — ‘Intended for animals farmed in land-based aquaculture systems’ 6. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including skin, eye and breathing protection. | 2 April 2033 |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | Minimum content | Maximum content | Other provisions | End of period of authorisation |
| --- | --- | --- | --- | --- | --- | --- | --- | --- |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | mg of additive/kg of complete feedingstuff with a moisture content of 12% | mg of additive/kg of complete feedingstuff with a moisture content of 12% | Other provisions | End of period of authorisation |
| Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds |
| 2b01017 | Valencene | Additive composition Valencene Characterisation of active substance Valencene Produced by chemical synthesis Purity: min. 94% Chemical formula: C15H24 CAS number: 4630-07-3 FLAVIS: 01.017 | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12%: 5 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including skin, eye and breathing protection. | 2 April 2033 |
| 2b01017 | Valencene | Analytical method 42 For the determination of valencene in the feed additive and in feed flavouring premixtures: — Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12%: 5 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including skin, eye and breathing protection. | 2 April 2033 |
Reading this document does not replace reading the official text published in the Official Journal of the European Union. We assume no responsibility for any inaccuracies arising from the conversion of the original to this format.
This text is published under EUR-Lex's own terms of reuse, not a Legalize or public-domain licence.
EUR-Lex
Creative Commons Attribution 4.0 International (CC BY 4.0)
© European Union, https://eur-lex.europa.eu — Source: EUR-Lex (Publications Office of the European Union). Reused under the Creative Commons Attribution 4.0 International (CC BY 4.0) licence. Only EU legislation published in the printed Official Journal of the European Union is deemed authentic; consolidated texts are reproduced here for documentation purposes and have been reformatted to Markdown.