LegalizeCommission Implementing Regulation (EU) 2023/1073 of 1 June 2023 granting a Union authorisation for the single biocidal product ‘Spray On wipes’ in accordance with Regulation (EU) No 528/2012 of the European Parliament and of the Council (Text with EEA relevance)
This is the act as published. Later amendments are not folded into the text below: each one is a separate act in this repository and an entry in this law's history.
| 2.6.2023 | EN | Official Journal of the European Union | L 143/118 |
THE EUROPEAN COMMISSION,
Having regard to the Treaty on the Functioning of the European Union,
Having regard to Regulation (EU) No 528/2012 of the European Parliament and of the Council of 22 May 2012 concerning the making available on the market and use of biocidal products 1, and in particular Article 44(5), first subparagraph, thereof,
Whereas:
- (1) On 23 April 2019, Laboratorium Dr Deppe GmbH submitted to the European Chemicals Agency (‘the Agency’) an application in accordance with Article 43(1) of Regulation (EU) No 528/2012 and Article 4 of Commission Implementing Regulation (EU) No 414/2013 2 for Union authorisation of the same single biocidal product, as referred to in Article 1 of that Regulation, named ‘Spray On wipes’, of product-types 2 and 4, as described in Annex V to Regulation (EU) No 528/2012. The application was recorded under case number BC-VA051119-47 in the Register for Biocidal Products (‘the Register’). The application also indicated the application number of the related reference biocidal product family ‘Knieler & Team Propanol Family’, recorded in the Register under case number BC-AQ050985-22.
- (2) The same single biocidal product ‘Spray On wipes’ contains propan-1-ol and propan-2-ol as the active substances, which are included in the Union list of approved active substances referred to in Article 9(2) of Regulation (EU) No 528/2012 for product-types 2 and 4.
- (3) On 8 December 2021, the Agency submitted to the Commission an opinion 3 and the draft summary of the biocidal product characteristics (‘SPC’) of ‘Spray On wipes’ in accordance with Article 6 of Implementing Regulation (EU) No 414/2013.
- (4) The opinion concludes that the proposed differences between the same single biocidal product and the related reference biocidal product are limited to information which can be the subject of an administrative change in accordance with Commission Implementing Regulation (EU) No 354/2013 4, and that based on the assessment of the related reference biocidal product family ‘Knieler & Team Propanol Family’ and subject to compliance with the draft SPC, the same single biocidal product meets the conditions laid down in Article 19(1) of Regulation (EU) No 528/2012.
- (5) On 20 October 2022, the Agency transmitted to the Commission the draft SPC in all the official languages of the Union in accordance with Article 44(4) of Regulation (EU) No 528/2012.
- (6) The Commission concurs with the opinion of the Agency and considers it therefore appropriate to grant a Union authorisation for the same single biocidal product ‘Spray On wipes’.
- (7) The measures provided for in this Regulation are in accordance with the opinion of the Standing Committee on Biocidal Products,
HAS ADOPTED THIS REGULATION:
Article 1
A Union authorisation with authorisation number EU-0027668-0000 is granted to Laboratorium Dr Deppe GmbH for the making available on the market and use of the same single biocidal product ‘Spray On wipes’ in accordance with the summary of the biocidal product characteristics set out in the Annex.
The Union authorisation is valid from 22 June 2023 until 31 July 2032.
Article 2
This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.
This Regulation shall be binding in its entirety and directly applicable in all Member States.
Done at Brussels, 1 June 2023.
For the Commission
The President
Ursula VON DER LEYEN
Commission Implementing Regulation (EU) No 414/2013 of 6 May 2013 specifying a procedure for the authorisation of same biocidal products in accordance with Regulation (EU) No 528/2012 of the European Parliament and of the Council (OJ L 125, 7.5.2013, p. 4).
ECHA opinion for ‘Spray On wipes’, 8 December 2021, https://echa.europa.eu/opinions-on-union-authorisation
Commission Implementing Regulation (EU) No 354/2013 of 18 April 2013 on changes of biocidal products authorised in accordance with Regulation (EU) No 528/2012 of the European Parliament and of the Council (OJ L 109, 19.4.2013, p. 4).
ANNEX
Summary of product characteristics for a biocidal product
Spray On wipes
Product type 2 – Disinfectants and algaecides not intended for direct application to humans or animals (Disinfectants)
Product type 4 – Food and feed area (Disinfectants)
Authorisation number: EU-0027668-0000
R4BP asset number: EU-0027668-0000
1. ADMINISTRATIVE INFORMATION
1.1. Trade name(s) of the product
| Trade name(s) | Spray On wipes MyClean DS Tücher plus MyClean DS Flow Pack plus MyClean DS Tücher basic MyClean DS Flow Pack basic Medizid Rapid Pro Desinfektionstücher Medizid Rapid QF Pro Flowpack Medizid Rapid Next Desinfektionstücher Medizid Rapid QF Next Flowpack Bavicid Wipe FAVORIT Wet Wipes Pro FAVORIT Wet Wipes Classic FAVORIT Wet Wipes Viruguard FAVORIT Wet Wipes Pure FAVORIT Wet Wipes Soft FAVORIT Wet Wipes Premium FAVORIT Wet Wipes zero FAVORIT Wet Wipes Quick FAVORIT Wet Wipes Maxi FAVORIT Wet Wipes Protect FAVORIT Wet Wipes universal FAVORIT Wet Wipes Basic FAVORIT Wet Wipes Basic QF Immix Clean Pro Wipes FAVORIT Wet Wipes Xtra |
1.2. Authorisation holder
| Name and address of the authorisation holder | Name | Laboratorium Dr Deppe GmbH |
| Name and address of the authorisation holder | Address | Hooghe Weg 35, 47906 Kempen Germany |
| Authorisation number | EU-0027668-0000 | EU-0027668-0000 |
| R4BP asset number | EU-0027668-0000 | EU-0027668-0000 |
| Date of the authorisation | 22 June 2023 | 22 June 2023 |
| Expiry date of the authorisation | 31.7.2032 | 31.7.2032 |
1.3. Manufacturer(s) of the product
| Name of manufacturer | Laboratorium Dr Deppe GmbH |
| Address of manufacturer | Hooghe Weg 35, 47906 Kempen Germany |
| Location of manufacturing sites | Laboratorium Dr Deppe GmbH, Hooghe Weg 35, 47906 Kempen Germany |
1.4. Manufacturer(s) of the active substance(s)
| Active substance | Propan-1-ol |
| Name of manufacturer | OQ Chemicals GmbH (formerly Oxea GmbH) |
| Address of manufacturer | Rheinpromenade 4a, 40789 Monheim am Rhein Germany |
| Location of manufacturing sites | OQ Chemicals Corperation (formerly Oxea Coperation), 2001 FM 3057 TX, 77414 Bay City United States |
| --- | --- |
| Active substance | Propan-1-ol |
| Name of manufacturer | BASF SE |
| Address of manufacturer | Carl-Bosch-Str. 38, 67056 Ludwigshafen Germany |
| Location of manufacturing sites | BASF SE, Carl-Bosch-Str. 38, 67056 Ludwigshafen Germany |
| --- | --- |
| Active substance | Propan-1-ol |
| Name of manufacturer | SASOL Chemie GmbH & Co. KG |
| Address of manufacturer | Secunda Chemical Operations, Sasol Place, 50 Katherine Street, 2090 Sandton South Africa |
| Location of manufacturing sites | Secunda Chemical Operations, PDP Kruger Street, 2302 Secunda South Africa |
| --- | --- |
| Active substance | Propan-2-ol |
| Name of manufacturer | Stockmeier Chemie GmbH & Co. KG |
| Address of manufacturer | Am Stadtholz 37, 33609 Bielefeld Germany |
| Location of manufacturing sites | INEOS Solvent Germany GmbH, Römerstrasse 733, 47443 Moers Germany |
| --- | --- |
| Active substance | Propan-2-ol |
| Name of manufacturer | Brenntag GmbH |
| Address of manufacturer | Stinnes-Platz 1, 45472 Mülheim an der Ruhr Germany |
| Location of manufacturing sites | Shell Nederland Raffinaderij B.V., 3196 KK Rotterdam-Pernis Netherlands Exxon Mobil, LA 70805 Baton Rouge United States |
2. PRODUCT COMPOSITION AND FORMULATION
2.1. Qualitative and quantitative information on the composition of the product
| Common name | IUPAC name | Function | CAS number | EC number | Content (%) |
|---|---|---|---|---|---|
| Propan-1-ol | Active Substance | 71-23-8 | 200-746-9 | 14,925 | |
| Propan-2-ol | Active Substance | 67-63-0 | 200-661-7 | 44,73 |
2.2. Type of formulation
AL – Any other liquid
3. HAZARD AND PRECAUTIONARY STATEMENTS
| Hazard statements | Highly flammable liquid and vapour. Causes serious eye damage. May cause drowsiness or dizziness. Repeated exposure may cause skin dryness or cracking. |
| Precautionary statements | Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. – No smoking. Keep container tightly closed. Avoid breathing vapours. Use only outdoors or in a well-ventilated area. IF INHALED:Remove person to fresh air and keep comfortable for breathing. IF IN EYES:Rinse cautiously with water for several minutes.Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER/doctor. Store in a well-ventilated place.Keep cool. Store locked up. Dispose of contents to an authorised waste collection point. |
4. AUTHORISED USES(S)
4.1. Use description
Table 1. Use # 1 – hard non-porous small surface disinfection RTU wipes
| Product type | PT02 – Disinfectants and algaecides not intended for direct application to humans or animals (Disinfectants) |
| Where relevant, an exact description of the authorised use | Not relevant |
| Target organism(s) (including development stage) | Scientific name: no data Common name: Bacteria Development stage: Scientific name: no data Common name: Yeasts Development stage: Scientific name: no data Common name: Enveloped viruses Development stage: |
| Field(s) of use | Indoor Health care facilities and pharmaceutical and cosmetic industry, for example patient-near surrounding, working areas/desks, general equipment (excluding food contact surfaces): disinfection of small hard/non-porous surfaces For professional use only. |
| Application method(s) | Method: Manual application Detailed description: Ready-to-use disinfectant wipes at room temperature (20 ± 2 °C). The surface to be disinfected is wiped and wetted with a sufficient amount of the product, ensuring complete Coverage. |
| Application rate(s) and frequency | Application Rate: Minimum exposure time: for the control of bacteria, yeasts and enveloped viruses: 60 sec; Make the surface completely wet. Dilution (%): Ready-to-use product Number and timing of application: A reasonable frequency of disinfection in a patient’s room is 1-2 per day. Maximum number of applications is 6 per day. No safety intervals need to be considered between the application phases. |
| Category(ies) of users | Industrial Professional |
| Pack sizes and packaging material | Flow-pack of polyethylene (PE) composite foil with high-density polyethylene (HDPE) Flap cover, containing 80 Cellulose wipes; Dispenser bag of PE composite foil, containing 70 Cellulose wipes used with dispenser box |
4.1.1. Use-specific instructions for use
Surfaces should always be visibly clean prior to disinfection. Maximum number of applications is 6 per day.
4.1.2. Use-specific risk mitigation measures
See general directions for use
4.1.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use
4.1.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use
4.1.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use
4.2. Use description
Table 2. Use # 2 – hard non-porous small surface disinfection RTU wipes
| Product type | PT04 – Food and feed area (Disinfectants) |
|---|---|
| Where relevant, an exact description of the authorised use | Not relevant |
| Target organism(s) (including development stage) | Scientific name: no data Common name: Bacteria Development stage: Scientific name: no data Common name: Yeasts Development stage: |
| Field(s) of use | Indoor Health care facilities and food industry, for example patient-near surrounding, food preparation and handling in kitchens/restaurants): disinfection of small hard/non-porous surfaces. For professional use only. |
| Application method(s) | Method: Manual application Detailed description: Ready-to-use disinfectant wipes at room temperature (20 ± 2 °C). The surface to be disinfected is wetted with a sufficient amount of the product by wiping, ensuring complete coverage. |
| Application rate(s) and frequency | Application Rate: Minimum exposure time: for the control of bacteria and yeasts at 20 °C: 60 sec; Make the surface completely wet. Dilution (%): Ready-to-use product Number and timing of application: The product can be used as often as necessary. A reasonable frequency of disinfection in kitchens is 1-2 per day. No safety intervals need to be considered between the application phases. |
| Category(ies) of users | Industrial Professional |
| Pack sizes and packaging material | Flow-pack of polyethylene (PE) composite foil with high-density polyethylene (HDPE) Flap cover, containing 80 Cellulose wipes; Dispenser bag of PE composite foil, containing 70 Cellulose wipes used with dispenser box |
4.2.1. Use-specific instructions for use
Surfaces should always be visibly clean prior to disinfection.
4.2.2. Use-specific risk mitigation measures
See general directions for use
4.2.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use
4.2.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use
4.2.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use
5. GENERAL DIRECTIONS FOR USE 5
5.1. Instructions for use
For professional use only.
For wipes reseal the package after opening.
5.2. Risk mitigation measures
Avoid contact with eyes.
Keep out of reach of children
5.3. Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
First-aid measures general: Move the affected person away from the contaminated area. Get medical advice/attention if you feel unwell. If possible, show this sheet.
IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing. Call a POISON CENTRE or a doctor.
IF ON SKIN: Immediately wash skin with plenty of water. Thereafter take off all contaminated clothing and wash it before reuse. Continue to wash the skin with water for 15 minutes. Call a POISON CENTRE or a doctor.
IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing for at least 15 minutes. Call 112/ambulance for medical assistance.
Information to Healthcare personnel/doctor:
The eyes should also be rinsed repeatedly on the way to the doctor if eye exposure to alkaline chemicals (pH > 11), amines and acids like acetic acid, formic acid or propionic acid.
IF SWALLOWED: Immediately rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. Call 112/ambulance for medical assistance.
Accidental release measures:Stop leak if safe to do so. Remove ignition sources. Use special care to avoid static electric charges. No open flames. No smoking.Prevent entry to sewers and public waters.Wipe up with absorbent material (for example cloth). Soak up spills with inert solids, such as clay or diatomaceous earth as soon as possible. Take up mechanically (sweeping, shovelling). Dispose of in accordance with relevant local regulations.
5.4. Instructions for safe disposal of the product and its packaging
Disposal must be done according to official regulations. Do not empty into drains. Do not dispose of with domestic waste. Dispose of contents/container to an authorised waste collection point. Empty the packaging completely prior to disposal. When totally empty, containers are recyclable like any other packing.
5.5. Conditions of storage and shelf-life of the product under normal conditions of storage
Shelf-life: 24 months
Store in dry, cool, well-ventilated area. Keep container tightly closed. Keep out of direct sunlight.
Recommended storage temperature: 0 – 30 °C
Do not store at temperatures below 0 °C
Do not store near food, drink and animal feedingstuff. Keep away from combustible material.
6. OTHER INFORMATION
Instructions for use, risk mitigation measures and other directions for use under this section are valid for any authorised uses.
Reading this document does not replace reading the official text published in the Official Journal of the European Union. We assume no responsibility for any inaccuracies arising from the conversion of the original to this format.
This text is published under EUR-Lex's own terms of reuse, not a Legalize or public-domain licence.
EUR-Lex
Creative Commons Attribution 4.0 International (CC BY 4.0)
© European Union, https://eur-lex.europa.eu — Source: EUR-Lex (Publications Office of the European Union). Reused under the Creative Commons Attribution 4.0 International (CC BY 4.0) licence. Only EU legislation published in the printed Official Journal of the European Union is deemed authentic; consolidated texts are reproduced here for documentation purposes and have been reformatted to Markdown.