LegalizeCommission Implementing Regulation (EU) 2023/1417 of 5 July 2023 concerning the authorisation of butyric acid, ethyl butyrate, ethyl isobutyrate, ethyl isovalerate, methyl isovalerate, 2-methyl-2-pentenoic acid, 6-methylhept-5-en-2-one, undecan-2-one, octan-2-one, nonan-2-one, octan-3-one, tridecan-2-one, 5-methylhept-2-en-4-one, dodecano-1,5-lactone, tetradecano-1,5-lactone, 5-methylfurfural, 4-phenylbut-3-en-2-one, p-anisyl alcohol, 4-methoxybenzaldehyde, piperonal, vanillin, p-anisyl acetate, benzyl benzoate, isobutyl salicylate, isopentyl salicylate, benzyl salicylate and diphenyl ether as feed additives for all animal species (Text with EEA relevance)
This is the act as published. Later amendments are not folded into the text below: each one is a separate act in this repository and an entry in this law's history.
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | Minimum content | Maximum content | Other provisions | End of period of authorisation |
|---|---|---|---|---|---|---|---|---|
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | mg of active substance/kg of complete feedingstuff with a moisture content of 12 % | mg of active substance/kg of complete feedingstuff with a moisture content of 12 % | Other provisions | End of period of authorisation |
| Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds |
| 2b08005 | Butyric acid | Additive composition Butyric acid Characterisation of active substance Butyric acid Produced by chemical synthesis Purity: min. 99 % Chemical formula: C4 H8 O2 CAS number: 107-92-6 FLAVIS: 08.005 | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12 %: 125 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address the potential risks resulting from their use. Where those risks cannot be eliminated by such procedures and measures, the additive and premixtures shall be used with personal breathing eye and skin protective equipment. | 26 July 2033 |
| 2b08005 | Butyric acid | Analytical method 14 For the identification of butyric acid in the feed additive and in feed flavouring premixtures: — Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12 %: 125 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address the potential risks resulting from their use. Where those risks cannot be eliminated by such procedures and measures, the additive and premixtures shall be used with personal breathing eye and skin protective equipment. | 26 July 2033 |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | Minimum content | Maximum content | Other provisions | End of period of authorisation |
| --- | --- | --- | --- | --- | --- | --- | --- | --- |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | mg of active substance/kg of complete feedingstuff with a moisture content of 12 % | mg of active substance/kg of complete feedingstuff with a moisture content of 12 % | Other provisions | End of period of authorisation |
| Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds |
| 2b09039 | Ethyl butyrate | Additive composition Ethyl butyrate Characterisation of active substance Ethyl butyrate Produced by chemical synthesis Purity: min. 98 % Chemical formula: C6H12O2 CAS number: 105 -54 -4 FLAVIS: 09.039 | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12 %: 125 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address the potential risks resulting from their use. Where those risks cannot be eliminated by such procedures and measures, the additive and premixtures shall be used with personal breathing eye and skin protective equipment. | 26 July 2033 |
| 2b09039 | Ethyl butyrate | Analytical method 15 For the identification of ethyl butyrate in the feed additive and in feed flavouring premixtures: — Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12 %: 125 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address the potential risks resulting from their use. Where those risks cannot be eliminated by such procedures and measures, the additive and premixtures shall be used with personal breathing eye and skin protective equipment. | 26 July 2033 |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | Minimum content | Maximum content | Other provisions | End of period of authorisation |
| --- | --- | --- | --- | --- | --- | --- | --- | --- |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | mg of active substance/kg of complete feedingstuff with a moisture content of 12 % | mg of active substance/kg of complete feedingstuff with a moisture content of 12 % | Other provisions | End of period of authorisation |
| Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds |
| 2b09413 | Ethyl isobutyrate | Additive composition Ethyl isobutyrate Characterisation of active substance Ethyl isobutyrate Produced by chemical synthesis Purity: min. 98 % Chemical formula: C6H12O2 CAS number: 97-62-1 FLAVIS: 09.413 | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12 %: 25 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address the potential risks resulting from their use. Where those risks cannot be eliminated by such procedures and measures, the additive and premixtures shall be used with personal breathing eye and skin protective equipment. | 26 July 2033 |
| 2b09413 | Ethyl isobutyrate | Analytical method 16 For the identification of ethyl isobutyrate in the feed additive and in feed flavouring premixtures: — Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12 %: 25 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address the potential risks resulting from their use. Where those risks cannot be eliminated by such procedures and measures, the additive and premixtures shall be used with personal breathing eye and skin protective equipment. | 26 July 2033 |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | Minimum content | Maximum content | Other provisions | End of period of authorisation |
| --- | --- | --- | --- | --- | --- | --- | --- | --- |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | mg of active substance/kg of complete feedingstuff with a moisture content of 12 % | mg of active substance/kg of complete feedingstuff with a moisture content of 12 % | Other provisions | End of period of authorisation |
| Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds |
| 2b09447 | Ethyl isovalerate | Additive composition Ethyl isovalerate Characterisation of active substance Ethyl isovalerate Produced by chemical synthesis Purity: min. 98 % Chemical formula: C7H14O2 CAS number: 108-64-5 FLAVIS: 09.447 | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12 %: 25 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address the potential risks resulting from their use. Where those risks cannot be eliminated by such procedures and measures, the additive and premixtures shall be used with personal breathing eye and skin protective equipment. | 26 July 2033 |
| 2b09447 | Ethyl isovalerate | Analytical method 17 For the identification of ethyl isovalerate in the feed additive and in feed flavouring premixtures: — Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12 %: 25 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address the potential risks resulting from their use. Where those risks cannot be eliminated by such procedures and measures, the additive and premixtures shall be used with personal breathing eye and skin protective equipment. | 26 July 2033 |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | Minimum content | Maximum content | Other provisions | End of period of authorisation |
| --- | --- | --- | --- | --- | --- | --- | --- | --- |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | mg of active substance/kg of complete feedingstuff with a moisture content of 12 % | mg of active substance/kg of complete feedingstuff with a moisture content of 12 % | Other provisions | End of period of authorisation |
| Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds |
| 2b09462 | Methyl isovalerate | Additive composition Methyl isovalerate Characterisation of active substance Methyl isovalerate Produced by chemical synthesis Purity: min. 98 % Chemical formula: C6H12O2 CAS number: 556-24-1 FLAVIS: 09.462 | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12 %: 5 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address the potential risks resulting from their use. Where those risks cannot be eliminated by such procedures and measures, the additive and premixtures shall be used with personal breathing eye and skin protective equipment. | 26 July 2033 |
| 2b09462 | Methyl isovalerate | Analytical method 18 For the identification of methyl isovalerate in the feed additive and in feed flavouring premixtures: — Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12 %: 5 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address the potential risks resulting from their use. Where those risks cannot be eliminated by such procedures and measures, the additive and premixtures shall be used with personal breathing eye and skin protective equipment. | 26 July 2033 |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | Minimum content | Maximum content | Other provisions | End of period of authorisation |
| --- | --- | --- | --- | --- | --- | --- | --- | --- |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | mg of active substance/kg of complete feedingstuff with a moisture content of 12 % | mg of active substance/kg of complete feedingstuff with a moisture content of 12 % | Other provisions | End of period of authorisation |
| Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds |
| 2b08055 | 2-Methyl-2-pentenoic acid | Additive composition 2-Methyl-2-pentenoic acid Characterisation of active substance 2-Methyl-2-pentenoic acid Produced by chemical synthesis Purity: min. 98 % Chemical formula: C6H10O2 CAS number: 3142-72-1 FLAVIS: 08.055 | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12 %: 5 mg’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address the potential risks resulting from their use. Where those risks cannot be eliminated by such procedures and measures, the additive and premixtures shall be used with personal breathing eye and skin protective equipment. | 26 July 2033 |
| 2b08055 | 2-Methyl-2-pentenoic acid | Analytical method 19 For the identification of 2-Methyl-2-pentenoic acid in the feed additive and in feed flavouring premixtures: — Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12 %: 5 mg’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address the potential risks resulting from their use. Where those risks cannot be eliminated by such procedures and measures, the additive and premixtures shall be used with personal breathing eye and skin protective equipment. | 26 July 2033 |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | Minimum content | Maximum content | Other provisions | End of period of authorisation |
| --- | --- | --- | --- | --- | --- | --- | --- | --- |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | mg of active substance/kg of complete feedingstuff with a moisture content of 12 % | mg of active substance/kg of complete feedingstuff with a moisture content of 12 % | Other provisions | End of period of authorisation |
| Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds |
| 2b07015 | 6-Methylhept-5-en-2-one | Additive composition 6-Methylhept-5-en-2-one Characterisation of active substance 6-Methylhept-5-en-2-one Produced by chemical synthesis Purity: min. 97 % Chemical formula: C8H14O CAS number: 110-93-0 FLAVIS: 07.015 | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12 %: 4,5 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address the potential risks resulting from their use. Where those risks cannot be eliminated by such procedures and measures, the additive and premixtures shall be used with personal breathing eye and skin protective equipment. | 26 July 2033 |
| 2b07015 | 6-Methylhept-5-en-2-one | Analytical method 20 For the identification of 6-methylhept-5-en-2-one in the feed additive and in feed flavouring premixtures: — Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12 %: 4,5 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address the potential risks resulting from their use. Where those risks cannot be eliminated by such procedures and measures, the additive and premixtures shall be used with personal breathing eye and skin protective equipment. | 26 July 2033 |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | Minimum content | Maximum content | Other provisions | End of period of authorisation |
| --- | --- | --- | --- | --- | --- | --- | --- | --- |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | mg of active substance/kg of complete feedingstuff with a moisture content of 12 % | mg of active substance/kg of complete feedingstuff with a moisture content of 12 % | Other provisions | End of period of authorisation |
| Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds |
| 2b07016 | Undecan-2-one | Additive composition Undecan-2-one Characterisation of active substance Undecan-2-one Produced by chemical synthesis Purity: min. 96 % Chemical formula: C11H22O CAS number: 112-12-9 FLAVIS: 07.016 | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12 %: 10 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address the potential risks resulting from their use. Where those risks cannot be eliminated by such procedures and measures, the additive and premixtures shall be used with personal breathing eye and skin protective equipment. | 26 July 2033 |
| 2b07016 | Undecan-2-one | Analytical method 21 For the identification of undecan-2-one in the feed additive and in feed flavouring premixtures: — Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12 %: 10 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address the potential risks resulting from their use. Where those risks cannot be eliminated by such procedures and measures, the additive and premixtures shall be used with personal breathing eye and skin protective equipment. | 26 July 2033 |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | Minimum content | Maximum content | Other provisions | End of period of authorisation |
| --- | --- | --- | --- | --- | --- | --- | --- | --- |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | mg of active substance/kg of complete feedingstuff with a moisture content of 12 % | mg of active substance/kg of complete feedingstuff with a moisture content of 12 % | Other provisions | End of period of authorisation |
| Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds |
| 2b07019 | Octan-2-one | Additive composition Octan-2-one Characterisation of active substance Octan-2-one Produced by chemical synthesis Purity: min. 95 % Chemical formula: C8H16O CAS number: 111-13-7 FLAVIS: 07.019 | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12 %: 10 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address the potential risks resulting from their use. Where those risks cannot be eliminated by such procedures and measures, the additive and premixtures shall be used with personal breathing eye and skin protective equipment. | 26 July 2033 |
| 2b07019 | Octan-2-one | Analytical method 22 For the identification of octan-2-one in the feed additive and in feed flavouring premixtures: — Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12 %: 10 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address the potential risks resulting from their use. Where those risks cannot be eliminated by such procedures and measures, the additive and premixtures shall be used with personal breathing eye and skin protective equipment. | 26 July 2033 |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | Minimum content | Maximum content | Other provisions | End of period of authorisation |
| --- | --- | --- | --- | --- | --- | --- | --- | --- |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | mg of active substance/kg of complete feedingstuff with a moisture content of 12 % | mg of active substance/kg of complete feedingstuff with a moisture content of 12 % | Other provisions | End of period of authorisation |
| Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds |
| 2b07020 | Nonan-2-one | Additive composition Nonan-2-one Characterisation of active substance Nonan-2-one Produced by chemical synthesis Purity: min. 97 % Chemical formula: C9H18O CAS number: 821-55-6 FLAVIS: 07.020 | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12 %: 10 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address the potential risks resulting from their use. Where those risks cannot be eliminated by such procedures and measures, the additive and premixtures shall be used with personal breathing eye and skin protective equipment. | 26 July 2033 |
| 2b07020 | Nonan-2-one | Analytical method 23 For the identification of nonan-2-one in the feed additive and in feed flavouring premixtures: — Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12 %: 10 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address the potential risks resulting from their use. Where those risks cannot be eliminated by such procedures and measures, the additive and premixtures shall be used with personal breathing eye and skin protective equipment. | 26 July 2033 |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | Minimum content | Maximum content | Other provisions | End of period of authorisation |
| --- | --- | --- | --- | --- | --- | --- | --- | --- |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | mg of active substance/kg of complete feedingstuff with a moisture content of 12 % | mg of active substance/kg of complete feedingstuff with a moisture content of 12 % | Other provisions | End of period of authorisation |
| Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds |
| 2b07062 | Octan-3-one | Additive composition Octan-3-one Characterisation of active substance Octan-3-one Produced by chemical synthesis Purity: min. 98 % Chemical formula: C8H16O CAS number: 106-68-3 FLAVIS: 07.062 | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12 %: 10 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address the potential risks resulting from their use. Where those risks cannot be eliminated by such procedures and measures, the additive and premixtures shall be used with personal breathing eye and skin protective equipment. | 26 July 2033 |
| 2b07062 | Octan-3-one | Analytical method 24 For the identification of octan-3-one in the feed additive and in feed flavouring premixtures: — Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12 %: 10 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address the potential risks resulting from their use. Where those risks cannot be eliminated by such procedures and measures, the additive and premixtures shall be used with personal breathing eye and skin protective equipment. | 26 July 2033 |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | Minimum content | Maximum content | Other provisions | End of period of authorisation |
| --- | --- | --- | --- | --- | --- | --- | --- | --- |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | mg of active substance/kg of complete feedingstuff with a moisture content of 12 % | mg of active substance/kg of complete feedingstuff with a moisture content of 12 % | Other provisions | End of period of authorisation |
| Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds |
| 2b07103 | Tridecan-2- one | Additive composition Tridecan-2- one Characterisation of active substance Tridecan-2- onel Produced by chemical synthesis. Purity: min. 95 % Chemical formula: C13H26O CAS number: 593-08-8 FLAVIS: 07.103 | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12 %: 10 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address the potential risks resulting from their use. Where those risks cannot be eliminated by such procedures and measures, the additive and premixtures shall be used with personal breathing eye and skin protective equipment. | 26 July 2033 |
| 2b07103 | Tridecan-2- one | Analytical method 25 For the identification of tridecan-2- one in the feed additive and in feed flavouring premixtures: — Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12 %: 10 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address the potential risks resulting from their use. Where those risks cannot be eliminated by such procedures and measures, the additive and premixtures shall be used with personal breathing eye and skin protective equipment. | 26 July 2033 |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | Minimum content | Maximum content | Other provisions | End of period of authorisation |
| --- | --- | --- | --- | --- | --- | --- | --- | --- |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | mg of active substance/kg of complete feedingstuff with a moisture content of 12 % | mg of active substance/kg of complete feedingstuff with a moisture content of 12 % | Other provisions | End of period of authorisation |
| Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds |
| 2b07139 | 5- Methylhept 2-en-4-one | Additive composition 5- Methylhept 2-en-4-one Characterisation of active substance 5- Methylhept 2-en-4-one Produced by chemical synthesis Purity: min. 98 % Chemical formula: C8H14O CAS number: 81925-81-7 FLAVIS: 07.139 | All animals species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12 %: 5 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address the potential risks resulting from their use. Where those risks cannot be eliminated by such procedures and measures, the additive and premixtures shall be used with personal breathing eye and skin protective equipment. | 26 July 2033 |
| 2b07139 | 5- Methylhept 2-en-4-one | Analytical method 26 For the identification of 5- methylhept 2-en-4-one in the feed additive and in feed flavouring premixtures: — Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. | All animals species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12 %: 5 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address the potential risks resulting from their use. Where those risks cannot be eliminated by such procedures and measures, the additive and premixtures shall be used with personal breathing eye and skin protective equipment. | 26 July 2033 |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | Minimum content | Maximum content | Other provisions | End of period of authorisation |
| --- | --- | --- | --- | --- | --- | --- | --- | --- |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | mg of active substance/kg of complete feedingstuff with a moisture content of 12 % | mg of active substance/kg of complete feedingstuff with a moisture content of 12 % | Other provisions | End of period of authorisation |
| Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds |
| 2b10008 | Dodecano-1,5-lactone | Additive composition Dodecano-1,5-lactone Characterisation of active substance Dodecano-1,5-lactone Produced by chemical synthesis Purity: min. 98 % Chemical formula: C12H22O2 CAS number: 713-95-1 FLAVIS: 10.008 | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12 %: 25 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address the potential risks resulting from their use. Where those risks cannot be eliminated by such procedures and measures, the additive and premixtures shall be used with personal breathing eye and skin protective equipment. | 26 July 2033 |
| 2b10008 | Dodecano-1,5-lactone | Analytical method 27 For the identification of dodecano-1,5-lactone in the feed additive and in feed flavouring premixtures: — Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12 %: 25 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address the potential risks resulting from their use. Where those risks cannot be eliminated by such procedures and measures, the additive and premixtures shall be used with personal breathing eye and skin protective equipment. | 26 July 2033 |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | Minimum content | Maximum content | Other provisions | End of period of authorisation |
| --- | --- | --- | --- | --- | --- | --- | --- | --- |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | mg of active substance/kg of complete feedingstuff with a moisture content of 12 % | mg of active substance/kg of complete feedingstuff with a moisture content of 12 % | Other provisions | End of period of authorisation |
| Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds |
| 2b10016 | Tetradecano-1,5-lactone | Additive composition Tetradecano-1,5-lactone Characterisation of active substance Tetradecano-1,5-lactone Produced by chemical synthesis Purity: min. 97 % Chemical formula: C14H26O2 CAS number: 2721-22-4 FLAVIS: 10.016 | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12 %: 5 mg’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address the potential risks resulting from their use. Where those risks cannot be eliminated by such procedures and measures, the additive and premixtures shall be used with personal breathing eye and skin protective equipment. | 26 July 2033 |
| 2b10016 | Tetradecano-1,5-lactone | Analytical method 28 For the identification of tetradecano-1,5-lactone in the feed additive and in feed flavouring premixtures: — Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12 %: 5 mg’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address the potential risks resulting from their use. Where those risks cannot be eliminated by such procedures and measures, the additive and premixtures shall be used with personal breathing eye and skin protective equipment. | 26 July 2033 |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | Minimum content | Maximum content | Other provisions | End of period of authorisation |
| --- | --- | --- | --- | --- | --- | --- | --- | --- |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | mg of active substance/kg of complete feedingstuff with a moisture content of 12 % | mg of active substance/kg of complete feedingstuff with a moisture content of 12 % | Other provisions | End of period of authorisation |
| Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds |
| 2b13001 | 5- Methylfurfural | Additive composition 5- Methylfurfural Characterisation of active substance 5- Methylfurfural Produced by chemical synthesis Purity: min. 97 % Chemical formula: C6H6O2 CAS number: 620-02-0 FLAVIS: 13.001 | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12 %: 5 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address the potential risks resulting from their use. Where those risks cannot be eliminated by such procedures and measures, the additive and premixtures shall be used with personal breathing eye and skin protective equipment. | 26 July 2033 |
| 2b13001 | 5- Methylfurfural | Analytical method 29 For the identification of 5- methylfurfural in the feed additive and in feed flavouring premixtures: — Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12 %: 5 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address the potential risks resulting from their use. Where those risks cannot be eliminated by such procedures and measures, the additive and premixtures shall be used with personal breathing eye and skin protective equipment. | 26 July 2033 |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | Minimum content | Maximum content | Other provisions | End of period of authorisation |
| --- | --- | --- | --- | --- | --- | --- | --- | --- |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | mg of active substance/kg of complete feedingstuff with a moisture content of 12 % | mg of active substance/kg of complete feedingstuff with a moisture content of 12 % | Other provisions | End of period of authorisation |
| Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds |
| 2b07024 | 4-Phenylbut-3-en-2-one | Additive composition 4-Phenylbut-3-en-2-one Characterisation of active substance 4-Phenylbut-3-en-2-one Produced by chemical synthesis Purity: min. 97 % Chemical formula: C10H10O CAS number: 122-57-6 FLAVIS: 07.024 | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12 %: 5 mg’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address the potential risks resulting from their use. Where those risks cannot be eliminated by such procedures and measures, the additive and premixtures shall be used with personal breathing eye and skin protective equipment. | 26 July 2033 |
| 2b07024 | 4-Phenylbut-3-en-2-one | Analytical method 30 For the identification of 4-phenylbut-3-en-2-one in the feed additive and in feed flavouring premixtures: — Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12 %: 5 mg’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address the potential risks resulting from their use. Where those risks cannot be eliminated by such procedures and measures, the additive and premixtures shall be used with personal breathing eye and skin protective equipment. | 26 July 2033 |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | Minimum content | Maximum content | Other provisions | End of period of authorisation |
| --- | --- | --- | --- | --- | --- | --- | --- | --- |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | mg of active substance/kg of complete feedingstuff with a moisture content of 12 % | mg of active substance/kg of complete feedingstuff with a moisture content of 12 % | Other provisions | End of period of authorisation |
| Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds |
| 2b02128 | p-Anisyl alcohol | Additive composition p-Anisyl alcohol Characterisation of active substance p-Anisyl alcohol Produced by chemical synthesis Purity: min. ≥97 % Chemical formula: C8H10O2 CAS number: 105-13-5 FLAVIS: 02.128 | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12 %: — Poultry and fish: 1 mg. — Other animal species: 5 mg’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address the potential risks resulting from their use. Where those risks cannot be eliminated by such procedures and measures, the additive and premixtures shall be used with personal breathing eye and skin protective equipment. | 26 July 2033 |
| 2b02128 | p-Anisyl alcohol | Analytical method 31 For the identification of p-anisyl alcohol in the feed additive and in feed flavouring premixtures: — Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12 %: — Poultry and fish: 1 mg. — Other animal species: 5 mg’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address the potential risks resulting from their use. Where those risks cannot be eliminated by such procedures and measures, the additive and premixtures shall be used with personal breathing eye and skin protective equipment. | 26 July 2033 |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | Minimum content | Maximum content | Other provisions | End of period of authorisation |
| --- | --- | --- | --- | --- | --- | --- | --- | --- |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | mg of active substance/kg of complete feedingstuff with a moisture content of 12 % | mg of active substance/kg of complete feedingstuff with a moisture content of 12 % | Other provisions | End of period of authorisation |
| Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds |
| 2b05015 | 4-Methoxybenzaldehyde | Additive composition 4-Methoxybenzaldehyde Characterisation of active substance 4- Methoxybenz aldehyde Produced by chemical synthesis Purity: min. ≥ 97 % Chemical formula: C8H8O2 CAS number: 123-11-5 FLAVIS: 05.015 | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12 %: 25 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address the potential risks resulting from their use. Where those risks cannot be eliminated by such procedures and measures, the additive and premixtures shall be used with personal breathing eye and skin protective equipment. | 26 July 2033 |
| 2b05015 | 4-Methoxybenzaldehyde | Analytical method 32 For the identification of 4-methoxybenzaldehyde in the feed additive and in feed flavouring premixtures: — Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12 %: 25 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address the potential risks resulting from their use. Where those risks cannot be eliminated by such procedures and measures, the additive and premixtures shall be used with personal breathing eye and skin protective equipment. | 26 July 2033 |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | Minimum content | Maximum content | Other provisions | End of period of authorisation |
| --- | --- | --- | --- | --- | --- | --- | --- | --- |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | mg of active substance/kg of complete feedingstuff with a moisture content of 12 % | mg of active substance/kg of complete feedingstuff with a moisture content of 12 % | Other provisions | End of period of authorisation |
| Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds |
| 2b05016 | Piperonal | Additive composition Piperonal Characterisation of active substance Piperonal Produced by chemical synthesis Purity: min. ≥ 98 % Chemical formula: C8H6O3 CAS number: 120-57-0 FLAVIS: 05.016 | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12 %: 5 mg’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address the potential risks resulting from their use. Where those risks cannot be eliminated by such procedures and measures, the additive and premixtures shall be used with personal breathing eye and skin protective equipment. | 26 July 2033 |
| 2b05016 | Piperonal | Analytical method 33 For the identification of piperonal in the feed additive and in feed flavouring premixtures: — Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12 %: 5 mg’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address the potential risks resulting from their use. Where those risks cannot be eliminated by such procedures and measures, the additive and premixtures shall be used with personal breathing eye and skin protective equipment. | 26 July 2033 |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | Minimum content | Maximum content | Other provisions | End of period of authorisation |
| --- | --- | --- | --- | --- | --- | --- | --- | --- |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | mg of active substance/kg of complete feedingstuff with a moisture content of 12 % | mg of active substance/kg of complete feedingstuff with a moisture content of 12 % | Other provisions | End of period of authorisation |
| Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds |
| 2b05018 | Vanillin | Additive composition Vanillin Characterisation of active substance Vanillin Produced by chemical synthesis Purity: min. 97 % Chemical formula: C8H8O3 CAS number: 121-33-5 FLAVIS: 05.018 | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12 %: 125 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address the potential risks resulting from their use. Where those risks cannot be eliminated by such procedures and measures, the additive and premixtures shall be used with personal breathing eye and skin protective equipment. | 26 July 2033 |
| 2b05018 | Vanillin | Analytical method 34 For the identification of vanillin in the feed additive and in feed flavouring premixtures: — Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12 %: 125 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address the potential risks resulting from their use. Where those risks cannot be eliminated by such procedures and measures, the additive and premixtures shall be used with personal breathing eye and skin protective equipment. | 26 July 2033 |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | Minimum content | Maximum content | Other provisions | End of period of authorisation |
| --- | --- | --- | --- | --- | --- | --- | --- | --- |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | mg of active substance/kg of complete feedingstuff with a moisture content of 12 % | mg of active substance/kg of complete feedingstuff with a moisture content of 12 % | Other provisions | End of period of authorisation |
| Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds |
| 2b09019 | p-Anisyl acetate | Additive composition p-Anisyl acetate Characterisation of active substance p-Anisyl acetate Produced by chemical synthesis Purity: min. 97 % Chemical formula: C10H12O3 CAS number: 104-21-2 FLAVIS: 09.019 | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12 %: — Poultry and fish: 1 mg. — Other animal species: 5 mg’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address the potential risks resulting from their use. Where those risks cannot be eliminated by such procedures and measures, the additive and premixtures shall be used with personal breathing eye and skin protective equipment. | 26 July 2033 |
| 2b09019 | p-Anisyl acetate | Analytical method 35 For the identification of p-anisyl acetate in the feed additive and in feed flavouring premixtures: — Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12 %: — Poultry and fish: 1 mg. — Other animal species: 5 mg’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address the potential risks resulting from their use. Where those risks cannot be eliminated by such procedures and measures, the additive and premixtures shall be used with personal breathing eye and skin protective equipment. | 26 July 2033 |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | Minimum content | Maximum content | Other provisions | End of period of authorisation |
| --- | --- | --- | --- | --- | --- | --- | --- | --- |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | mg of active substance/kg of complete feedingstuff with a moisture content of 12 % | mg of active substance/kg of complete feedingstuff with a moisture content of 12 % | Other provisions | End of period of authorisation |
| Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds |
| 2b09727 | Benzyl benzoate | Additive composition Benzyl benzoate Characterisation of active substance Benzyl benzoate Produced by chemical synthesis Purity: min. > 99 % Chemical formula: C14H12O2 CAS number: 120-51-4 FLAVIS: 09.727 | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12 %: 5 mg’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address the potential risks resulting from their use. Where those risks cannot be eliminated by such procedures and measures, the additive and premixtures shall be used with personal breathing eye and skin protective equipment. | 26 July 2033 |
| 2b09727 | Benzyl benzoate | Analytical method 36 For the identification of benzyl benzoate in the feed additive and in feed flavouring premixtures: — Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12 %: 5 mg’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address the potential risks resulting from their use. Where those risks cannot be eliminated by such procedures and measures, the additive and premixtures shall be used with personal breathing eye and skin protective equipment. | 26 July 2033 |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | Minimum content | Maximum content | Other provisions | End of period of authorisation |
| --- | --- | --- | --- | --- | --- | --- | --- | --- |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | mg of active substance/kg of complete feedingstuff with a moisture content of 12 % | mg of active substance/kg of complete feedingstuff with a moisture content of 12 % | Other provisions | End of period of authorisation |
| Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds |
| 2b09750 | Isobutyl salicylate | Additive composition Isobutyl salicylate Characterisation of active substance Isobutyl salicylate Produced by chemical synthesis Purity: min. 98 % Chemical formula: C11H14O3 CAS number: 87-19-4 FLAVIS: 09.750 | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12 %: 5 mg’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address the potential risks resulting from their use. Where those risks cannot be eliminated by such procedures and measures, the additive and premixtures shall be used with personal breathing eye and skin protective equipment. | 26 July 2033 |
| 2b09750 | Isobutyl salicylate | Analytical method 37 For the identification of isobutyl salicylate in the feed additive and in feed flavouring premixtures: — Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12 %: 5 mg’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address the potential risks resulting from their use. Where those risks cannot be eliminated by such procedures and measures, the additive and premixtures shall be used with personal breathing eye and skin protective equipment. | 26 July 2033 |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | Minimum content | Maximum content | Other provisions | End of period of authorisation |
| --- | --- | --- | --- | --- | --- | --- | --- | --- |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | mg of active substance/kg of complete feedingstuff with a moisture content of 12 % | mg of active substance/kg of complete feedingstuff with a moisture content of 12 % | Other provisions | End of period of authorisation |
| Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds |
| 2b09751 | Isopentyl salicylate | Additive composition Isopentyl salicylate Characterisation of active substance Isopentyl salicylate Produced by chemical synthesis Purity: min. 98 % Chemical formula: C12H16O3 CAS number: 87-20-7 FLAVIS: 09.751 | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12 %: 5 mg’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address the potential risks resulting from their use. Where those risks cannot be eliminated by such procedures and measures, the additive and premixtures shall be used with personal breathing eye and skin protective equipment. | 26 July 2033 |
| 2b09751 | Isopentyl salicylate | Analytical method 38 For the identification of isopentyl salicylate in the feed additive and in feed flavouring premixtures: — Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12 %: 5 mg’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address the potential risks resulting from their use. Where those risks cannot be eliminated by such procedures and measures, the additive and premixtures shall be used with personal breathing eye and skin protective equipment. | 26 July 2033 |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | Minimum content | Maximum content | Other provisions | End of period of authorisation |
| --- | --- | --- | --- | --- | --- | --- | --- | --- |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | mg of active substance/kg of complete feedingstuff with a moisture content of 12 % | mg of active substance/kg of complete feedingstuff with a moisture content of 12 % | Other provisions | End of period of authorisation |
| Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds |
| 2b09752 | Benzyl salicylate | Additive composition Benzyl salicylate Characterisation of active substance Benzyl salicylate Produced by chemical synthesis Purity: min. 98 % Chemical formula: C14H12O3 CAS number: 118-58-1 FLAVIS:09.752 | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12 %: 25 mg’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address the potential risks resulting from their use. Where those risks cannot be eliminated by such procedures and measures, the additive and premixtures shall be used with personal breathing eye and skin protective equipment. | 26 July 2033 |
| 2b09752 | Benzyl salicylate | Analytical method 39 For the identification of benzyl salicylate in the feed additive and in feed flavouring premixtures: — Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12 %: 25 mg’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address the potential risks resulting from their use. Where those risks cannot be eliminated by such procedures and measures, the additive and premixtures shall be used with personal breathing eye and skin protective equipment. | 26 July 2033 |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | Minimum content | Maximum content | Other provisions | End of period of authorisation |
| --- | --- | --- | --- | --- | --- | --- | --- | --- |
| Identification number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | mg of active substance/kg of complete feedingstuff with a moisture content of 12 % | mg of active substance/kg of complete feedingstuff with a moisture content of 12 % | Other provisions | End of period of authorisation |
| Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds | Category: Sensory additives. Functional group: Flavouring compounds |
| 2b04035 | Diphenyl ether | Additive composition Diphenyl ether Characterisation of active substance Diphenyl ether Produced by chemical synthesis Purity: min. 99 % Chemical formula: C12H10 O CAS number: 101-84-8 FLAVIS: 04.035 | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12 %: 5 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address the potential risks resulting from their use. Where those risks cannot be eliminated by such procedures and measures, the additive and premixtures shall be used with personal breathing eye and skin protective equipment. | 26 July 2033 |
| 2b04035 | Diphenyl ether | Analytical method 40 For the identification of diphenyl ether in the feed additive and in feed flavouring premixtures: — Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. | All animal species | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12 %: 5 mg.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address the potential risks resulting from their use. Where those risks cannot be eliminated by such procedures and measures, the additive and premixtures shall be used with personal breathing eye and skin protective equipment. | 26 July 2033 |
Reading this document does not replace reading the official text published in the Official Journal of the European Union. We assume no responsibility for any inaccuracies arising from the conversion of the original to this format.
This text is published under EUR-Lex's own terms of reuse, not a Legalize or public-domain licence.
EUR-Lex
Creative Commons Attribution 4.0 International (CC BY 4.0)
© European Union, https://eur-lex.europa.eu — Source: EUR-Lex (Publications Office of the European Union). Reused under the Creative Commons Attribution 4.0 International (CC BY 4.0) licence. Only EU legislation published in the printed Official Journal of the European Union is deemed authentic; consolidated texts are reproduced here for documentation purposes and have been reformatted to Markdown.