Commission Implementing Regulation (EU) 2024/2385 of 9 September 2024 concerning the authorisation of 4-methyl-5-vinylthiazole as a feed additive for all animal species

Type Implementing Regulation
Publication 2024-09-10
State In force
Text As published
Department European Commission, SANTE
Source EUR-Lex
articles 3

This is the act as published. Later amendments are not folded into the text below: each one is a separate act in this repository and an entry in this law's history.

Reform history JSON API
Image omitted; see official source Official Journal of the European Union EN L series
--- --- ---
2024/2385 10.9.2024

THE EUROPEAN COMMISSION,

Having regard to the Treaty on the Functioning of the European Union,

Having regard to Regulation (EC) No 1831/2003 of the European Parliament and of the Council of 22 September 2003 on additives for use in animal nutrition 1, and in particular Article 9(2) thereof,

Whereas:

HAS ADOPTED THIS REGULATION:

Article 1

Authorisation

The substance specified in the Annex, belonging to the additive category ‘sensory additives’ and to the functional group ‘flavouring compounds’, is authorised as an additive in animal nutrition, subject to the conditions laid down in that Annex.

Article 2

Transitional measures

1.

The feed additive 4-methyl-5-vinylthiazole, as authorised pursuant to Directive 70/524/EEC and premixtures containing that additive, which are produced and labelled before 30 March 2025 in accordance with the rules applicable before 30 September 2024 may continue to be placed on the market and used until the stocks concerned are exhausted.

2.

Compound feed and feed materials containing the feed additive referred to in paragraph 1, which are produced and labelled before 30 September 2025 in accordance with the rules applicable before 30 September 2024 may continue to be placed on the market and used until the stocks concerned are exhausted if they are intended for food-producing animals.

3.

Compound feed and feed materials containing the feed additive referred to in paragraph 1, which are produced and labelled before 30 September 2026 in accordance with the rules applicable before 30 September 2024 may continue to be placed on the market and used until the stocks concerned are exhausted if they are intended for non-food producing animals.

Article 3

Entry into force

This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.

This Regulation shall be binding in its entirety and directly applicable in all Member States.

Done at Brussels, 9 September 2024.

For the Commission

The President

Ursula VON DER LEYEN

2

Council Directive 70/524/EEC of 23 November 1970 concerning additives in feedingstuffs (OJ L 270, 14.12.1970, p. 1, ELI: http://data.europa.eu/eli/dir/1970/524/oj).

3

EFSA Journal 2023;21(6):8051.

ANNEX

Identification number of the feed additive Additive Composition, chemical formula, description, analytical method Species or category of animal Maximum age Minimum content Maximum content Other provisions End of period of authorisation
Identification number of the feed additive Additive Composition, chemical formula, description, analytical method Species or category of animal Maximum age mg of active substance/kg of complete feedingstuff with a moisture content of 12 % mg of active substance/kg of complete feedingstuff with a moisture content of 12 % Other provisions End of period of authorisation
Category: Sensory additives. Functional group: Flavouring compounds Category: Sensory additives. Functional group: Flavouring compounds Category: Sensory additives. Functional group: Flavouring compounds Category: Sensory additives. Functional group: Flavouring compounds Category: Sensory additives. Functional group: Flavouring compounds Category: Sensory additives. Functional group: Flavouring compounds Category: Sensory additives. Functional group: Flavouring compounds Category: Sensory additives. Functional group: Flavouring compounds Category: Sensory additives. Functional group: Flavouring compounds
2b15018 4-Methyl-5-vinylthiazole Additive composition 4-Methyl-5-vinylthiazole Liquid form Characterisation of active substance 4-Methyl-5-vinylthiazole Produced by chemical synthesis Purity: min. 97 % Chemical formula: C6H7NS CAS number: 1759-28-0 FLAVIS: 15.018 Analytical method 4 For the identification of 4-methyl-5-vinylthiazole in the feed additive and flavouring premixtures: gas chromatography-mass spectrometry with retention time locking (GC-MS-RTL). All animal species 1. The additive shall be incorporated into the feed in the form of a premixture. 2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated. 3. On the label of the additive, the following shall be indicated: ‘Recommended maximum content of the active substance per kg of complete feedingstuff, with a moisture content of 12 %: — 0,2 mg for all poultry for laying or breeding purposes; — 0,1 mg for all poultry reared for laying or breeding; — 0,1 mg for all poultry for fattening; — 0,1 mg for ornamental birds; — 0,3 mg for all Suidae for reproduction; — 0,2 mg for piglets of all Suidae; — 0,2 mg for all Suidae for fattening; — 0,5 mg for calves for fattening up to 6 months; — 0,4 mg for all ruminants for fattening and Camelidae for fattening; — 0,3 mg for all other ruminants and Camelidae; — 0,4 mg for Equidae; — 0,5 mg for salmonids and minor fin fish; — 0,5 mg for ornamental fish; — 0,2 mg for rabbits; — 0,5 mg for dogs; — 0,4 mg for cats; — 0,1 mg for other animal species and categories.’ 4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture, where the use level on the label of the premixture would result in exceeding the level referred to in point 3. 5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks resulting from their use. Where those risks cannot be eliminated by such procedures and measures, the additive and premixtures shall be used with personal breathing, eye and skin protective equipment. 30 September 2034
4

Details of the analytical methods are available at the following address of the Reference Laboratory: https://joint-research-centre.ec.europa.eu/eurl-fa-eurl-feed-additives/eurl-fa-authorisation/eurl-fa-evaluation-reports_en

ELI: http://data.europa.eu/eli/reg_impl/2024/2385/oj

ISSN 1977-0677 (electronic edition)

Reading this document does not replace reading the official text published in the Official Journal of the European Union. We assume no responsibility for any inaccuracies arising from the conversion of the original to this format.

This text is published under EUR-Lex's own terms of reuse, not a Legalize or public-domain licence. EUR-Lex
Creative Commons Attribution 4.0 International (CC BY 4.0)
© European Union, https://eur-lex.europa.eu — Source: EUR-Lex (Publications Office of the European Union). Reused under the Creative Commons Attribution 4.0 International (CC BY 4.0) licence. Only EU legislation published in the printed Official Journal of the European Union is deemed authentic; consolidated texts are reproduced here for documentation purposes and have been reformatted to Markdown.