Regulation (EU) 2024/2865 of the European Parliament and of the Council of 23 October 2024 amending Regulation (EC) No 1272/2008 on classification, labelling and packaging of substances and mixtures (Text with EEA relevance)

• (1) Part A is amended as follows:
• (a) section 1 is replaced by the following: ‘1.   APPLICATION 1.1.Importers, downstream users and distributors referred to in Article 45(1b) and (1c) placing on the market mixtures for consumer use, within the meaning of section 2.4 of Part A of this Annex, shall comply with this Annex from 1 January 2021. 1.2.Importers, downstream users and distributors referred to in Article 45(1b) and (1c) placing on the market mixtures for professional use, within the meaning of section 2.4 of Part A of this Annex, shall comply with this Annex from 1 January 2021. 1.3.Importers, downstream users and distributors referred to in Article 45(1b) and (1c) placing on the market mixtures for industrial use or mixtures with an end use not subject to notification within the meaning of section 2.4 of Part A of this Annex, shall comply with this Annex from 1 January 2024. 1.4.Importers, downstream users and distributors referred to in Article 45(1b) and (1c) having submitted information relating to hazardous mixtures to a body appointed in accordance with Article 45(1) before the dates of applicability mentioned in sections 1.1, 1.2 and 1.3 and which are not in accordance with this Annex, shall for those mixtures not be required to comply with this Annex until 1 January 2025. 1.5.By way of derogation from section 1.4, if one of the changes described in section 4.1 of Part B of this Annex occurs before 1 January 2025, importers, downstream users and distributors referred to in Article 45(1b) and (1c) shall comply with this Annex before placing the mixture concerned on the market.’;
• (b) section 2.1 is replaced by the following: ‘2.1.This Annex sets out the requirements that importers, downstream users and distributors referred to in Article 45(1c) (“submitters”) placing mixtures on the market shall fulfil in respect of the submission of information so that appointed bodies have at their disposal the information required to carry out the tasks for which they are responsible under Article 45.’;
• (c) in section 2.4, first subparagraph, the following point is added: ‘(6)“composition conforming with a standard formula specified in Part D” means a composition which includes all the components listed in one of the standard formulas referred to in Part D of this Annex, where those components are present in the mixture in concentrations within the ranges specified in that standard formula.’;

• (2) Part B is amended as follows:
• (a) the following section is inserted: ‘1.1a.   Name and product description of standard formula or name of fuel For mixtures with a composition conforming with a standard formula specified in Part D, the name and product description of the relevant standard formula as indicated in that Part shall be included in the submission. For fuels listed in Table 3, the name of the fuel shall be provided as indicated in that table.’;
• (b) in section 3.1, the third paragraph is replaced by the following: ‘Components which are not present in a mixture shall not be notified. However, if those components are notified as part of an interchangeable component group in accordance with section 3.5. or their concentration has been submitted as a range of percentages in accordance with sections 3.6 or 3.7, they may be notified if it is certain that they will be present in the mixture at some point in time. In addition, for mixtures with a composition conforming with a standard formula specified in Part D for which the composition is notified in accordance with section 3.6, first indent, components listed in the relevant standard formula shall be notified even if the component is potentially not, or not permanently, present in cases where the indicated concentration range in Part D includes 0 %.’;
• (c) the title of section 3.6 is replaced by the following: ‘3.6.   Mixtures with a composition conforming with a standard formula’;
• (d) in section 3.7, the first row of Table 3 is replaced by the following: ‘Fuel name Product description’;
• (e) in section 4.1, the first paragraph, the following indent is added:
• — - ‘— when there are other changes to a mixture placed on the market which are relevant for the emergency health response referred to in Article 45’;

• (3) Part C is amended as follows:
• (a) section 1.2 is replaced by the following: ‘1.2.   Identification of the mixture, submitter and contact point Product identifier
• — Complete trade name(s) of the product including, where relevant, brand name(s), name of the product and variant name(s) as they appear on the label, without abbreviations or non-alphanumerical symbols and enabling specific identification of the product
• — Unique formula identifier(s) (UFI)
• — Other identifiers (authorisation number, company product codes)
• — In the case of group submission, all product identifiers shall be listed Name and product description of standard formula or name of fuel
• — Standard formula name and product description as specified in Part D (where applicable)
• — Fuel name as specified in Table 3 of Part B (where applicable) Contact details of the submitter, as defined in Section 2.1 of Part A of this Annex, and contact point
• — Name
• — Full address
• — Telephone number
• — Email address Contact details for rapid access to additional product information (24 hours/7 days). Only for limited submission.
• — Name
• — Telephone number (accessible 24 hours per day, 7 days per week)
• — Email address’;
• (b) section 1.4 is replaced by the following: ‘1.4.   Information on the mixture components and interchangeable component groups Identification of the mixture components
• — Chemical/trade name of the components
• — CAS number (where applicable)
• — EC number (where applicable)
• — UFI (where applicable)
• — Standard formula name and product description (where applicable) Name of interchangeable component groups (where applicable) Concentration and concentration ranges of the mixture components
• — Exact concentration or concentration range Classification of mixture components
• — Hazard classification (where applicable)
• — Additional identifiers (where applicable and relevant for health response) A list as provided for in Part B, section 3.1, fifth subparagraph (where applicable) ’;

• (4) Part D is amended as follows:
• (a) in section 1, the first row of the tables with standard formulas for cement are replaced by the following: ‘Standard formula name Cement Standard Formula 1’ ‘Standard formula name Cement Standard Formula 2’ ‘Standard formula name Cement Standard Formula 3’ ‘Standard formula name Cement Standard Formula 4’ ‘Standard formula name Cement Standard Formula 5’ ‘Standard formula name Cement Standard Formula 6’ ‘Standard formula name Cement Standard Formula 7’ ‘Standard formula name Cement Standard Formula 8’ ‘Standard formula name Cement Standard Formula 9’ ‘Standard formula name Cement Standard Formula 10’ ‘Standard formula name Cement Standard Formula 11’ ‘Standard formula name Cement Standard Formula 12’ ‘Standard formula name Cement Standard Formula 13’ ‘Standard formula name Cement Standard Formula 14’ ‘Standard formula name Cement Standard Formula 15’ ‘Standard formula name Cement Standard Formula 16’ ‘Standard formula name Cement Standard Formula 17’ ‘Standard formula name Cement Standard Formula 18’ ‘Standard formula name Cement Standard Formula 19’ ‘Standard formula name Cement Standard Formula 20’;
• (b) in section 2, the first row of the table with standard formula for gypsum is replaced by the following two rows: ‘Standard formula name Gypsum binder Standard Formula Product description Gypsum binder’;
• (c) in section 3, the first row of the tables with standard formulas for ready mixed concrete are replaced by the following: ‘Standard formula name Ready mixed concrete Standard Formula 1 Product description Ready mixed concrete with concrete strength classes C8/10, C12/15, C16/20, C20/25, C25/30, C28/35, C32/40, C35/45, C40/50, C45/55, C50/60, LC8/9, LC12/13, LC16/18, LC20/22, LC25/28, LC30/33, LC35/38, LC40/44, LC45/50, LC50/55, LC55/60’; ‘Standard formula name Ready mixed concrete Standard Formula 2 Product description Ready mixed concrete with concrete strength classes C55/67, C60/75, C70/85, C80/95, C90/105, C100/105, LC 60/66, LC70/77, LC80/88’.

[^E0001]: Directive (EU) 2021/555 of the European Parliament and of the Council of 24 March 2021 on control of the acquisition and possession of weapons (OJ L 115, 6.4.2021, p. 1).’;

[^E0002]: Regulation (EU) No 182/2011 of the European Parliament and of the Council of 16 February 2011 laying down the rules and general principles concerning mechanisms for control by Member States of the Commission’s exercise of implementing powers (OJ L 55, 28.2.2011, p. 13).’;

[^E0003]: Regulation (EU) 2024/2865 of the European Parliament and of the Council of 23 October 2024 amending Regulation (EC) No 1272/2008 of the European Parliament and of the Council on classification, labelling and packaging of substances and mixtures (OJ L, 2024/2865, 20.11.2024, ELI: http://data.europa.eu/eli/reg/2024/2865/oj)’;