LegalizeCommission Implementing Regulation (EU) 2025/2202 of 22 October 2025 amending Implementing Regulation (EU) 2022/1434 as regards administrative changes to the Union authorisation for the biocidal product family CMIT-MIT Aqueous 1.5-15, and correcting that Regulation
This is the act as published. Later amendments are not folded into the text below: each one is a separate act in this repository and an entry in this law's history.
| Trade name(s) | Trade name(s) | Trade name(s) | KATHON™ CF 400 Biocide | KATHON™ CF 400 Biocide | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Dab 4228 | Dab 4228 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | BAL 400BI | BAL 400BI | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Biocide 400 | Biocide 400 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Biotech 400 | Biotech 400 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Biocide KT400 | Biocide KT400 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | BioCheck KT400 | BioCheck KT400 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | KT400 | KT400 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | C 412 TT | C 412 TT | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Dab 4228 | Dab 4228 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Deep Bio® 400 | Deep Bio® 400 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Ecosafe Bio 400 | Ecosafe Bio 400 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Filtralga ME | Filtralga ME | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Filtralga 9550 | Filtralga 9550 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | PH-SB400 | PH-SB400 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Helamin BZ9550 | Helamin BZ9550 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Isotreat 400 | Isotreat 400 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | OS Isobio4 | OS Isobio4 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Odysside B 330 | Odysside B 330 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Relvamine BIOC | Relvamine BIOC | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Sayvol Bio LP400 | Sayvol Bio LP400 | Market area: EU | Market area: EU | Market area: EU |
| Authorisation number | Authorisation number | Authorisation number | EU-0025449-0004 1-3 | EU-0025449-0004 1-3 | EU-0025449-0004 1-3 | ||
| Common name | IUPAC name | Function | Function | CAS number | CAS number | EC number | Content (%) |
| C(M)IT/MIT (3:1) | Reaction mass of 5-chloro-2-methyl-2h-isothiazol-3-one and 2-methyl-2h-isothiazol-3-one (3:1) | Active substance | Active substance | 55965-84-9 | 55965-84-9 | 5,9 % (w/w) |
7.2. Trade name(s), authorisation number and specific composition of each individual product
| Trade name(s) | Trade name(s) | Trade name(s) | KATHON™CF 210 BIOCIDE | KATHON™CF 210 BIOCIDE | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | BAL 210BI | BAL 210BI | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | BioCheck KT210 | BioCheck KT210 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Biocide KT210 | Biocide KT210 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Biocide 210 | Biocide 210 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Biotech 210 | Biotech 210 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | B203-210 | B203-210 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Deep Bio® 210 | Deep Bio® 210 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Ecosafe Bio 210 | Ecosafe Bio 210 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Filtralga ME-15 | Filtralga ME-15 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | KT210 | KT210 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Isotreat 210 | Isotreat 210 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | MIRECIDE-M/86 | MIRECIDE-M/86 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | MK3203 | MK3203 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | MK3094 | MK3094 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | MK3394 | MK3394 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | OS Isobio 210 | OS Isobio 210 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Odysside B 330M | Odysside B 330M | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | PH-SB210 | PH-SB210 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | STENCO B-85 | STENCO B-85 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Sayvol Bio LP210 | Sayvol Bio LP210 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | TECNA 520 | TECNA 520 | Market area: EU | Market area: EU | Market area: EU |
| Authorisation number | Authorisation number | Authorisation number | EU-0025449-0005 1-3 | EU-0025449-0005 1-3 | EU-0025449-0005 1-3 | ||
| Common name | IUPAC name | Function | Function | CAS number | CAS number | EC number | Content (%) |
| C(M)IT/MIT (3:1) | Reaction mass of 5-chloro-2-methyl-2h-isothiazol-3-one and 2-methyl-2h-isothiazol-3-one (3:1) | Active substance | Active substance | 55965-84-9 | 55965-84-9 | 3,2 % (w/w) |
7.3. Trade name(s), authorisation number and specific composition of each individual product
| Trade name(s) | Trade name(s) | Trade name(s) | KATHON™WT 210 BIOCIDE | KATHON™WT 210 BIOCIDE | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | A-CID SA | A-CID SA | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | ADUR 166 | ADUR 166 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | ALG 200 | ALG 200 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Biocide BALK 20 | Biocide BALK 20 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Biocide KT210WT | Biocide KT210WT | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | France Algue 242 | France Algue 242 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | KL60 TA21 | KL60 TA21 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | KT210WT | KT210WT | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | MK3094 | MK3094 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | MK3394 | MK3394 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | MK3203 | MK3203 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | B203-210WT | B203-210WT | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Biocide 210WT | Biocide 210WT | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Biotech 210WT | Biotech 210WT | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Deep Bio® 210WT | Deep Bio® 210WT | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Ecosafe Bio 210WT | Ecosafe Bio 210WT | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | OS Isobio 210WT | OS Isobio 210WT | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | PH-SB210WT | PH-SB210WT | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Sayvol Bio LP210WT | Sayvol Bio LP210WT | Market area: EU | Market area: EU | Market area: EU |
| Authorisation number | Authorisation number | Authorisation number | EU-0025449-0006 1-3 | EU-0025449-0006 1-3 | EU-0025449-0006 1-3 | ||
| Common name | IUPAC name | Function | Function | CAS number | CAS number | EC number | Content (%) |
| C(M)IT/MIT (3:1) | Reaction mass of 5-chloro-2-methyl-2h-isothiazol-3-one and 2-methyl-2h-isothiazol-3-one (3:1) | Active substance | Active substance | 55965-84-9 | 55965-84-9 | 3,2 % (w/w) |
7.4. Trade name(s), authorisation number and specific composition of each individual product
| Trade name(s) | Trade name(s) | Trade name(s) | KATHON™ WTE BIOCIDE | KATHON™ WTE BIOCIDE | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | KATHON™ WTE | KATHON™ WTE | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | KATHON™ LXE BIOCIDE | KATHON™ LXE BIOCIDE | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | KATHON™ LXE | KATHON™ LXE | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | KATHON™ MWE BIOCIDE | KATHON™ MWE BIOCIDE | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Bansan 150 | Bansan 150 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Biocide KT200LX | Biocide KT200LX | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Biocide KT200WT | Biocide KT200WT | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Biocide KT200MW | Biocide KT200MW | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Biocide 515WTE | Biocide 515WTE | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Biocide 515 MW | Biocide 515 MW | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Biotech 103WTE | Biotech 103WTE | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | BioCheck WTE | BioCheck WTE | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | BioCheck KT MW | BioCheck KT MW | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Biocheck WB | Biocheck WB | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Biocheck 3103 | Biocheck 3103 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Biotech 103MW | Biotech 103MW | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | BIOMATE SAN9363 | BIOMATE SAN9363 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | BIO 417 | BIO 417 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | B203WTE | B203WTE | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | B203MW | B203MW | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | C 412 TTE | C 412 TTE | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Deep Bio® 20MW | Deep Bio® 20MW | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Deep Bio® 20WTE | Deep Bio® 20WTE | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Ecosafe Bio WTE | Ecosafe Bio WTE | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Ecosafe Bio MW | Ecosafe Bio MW | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Hydrex™ 7310 | Hydrex™ 7310 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Isotreat WTE | Isotreat WTE | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | KT200LX | KT200LX | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | KT200WT | KT200WT | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | KT200MW | KT200MW | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | MIRECIDE-M/87 | MIRECIDE-M/87 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Novocide 10 C | Novocide 10 C | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | OBBIO210 | OBBIO210 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | OS Isobio 1.5WTE | OS Isobio 1.5WTE | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Pastosept K | Pastosept K | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | PH-SB102WTE | PH-SB102WTE | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | PH-SB102MW | PH-SB102MW | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | PS 2175 | PS 2175 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | SAN ADDITIVE | SAN ADDITIVE | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | SANY POOL | SANY POOL | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Sayvol Bio WTE | Sayvol Bio WTE | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Sayvol Bio LP MW | Sayvol Bio LP MW | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Wacozid 3150 | Wacozid 3150 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | OS Isobio 1.5MW | OS Isobio 1.5MW | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | BAC-S | BAC-S | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Biocide BAL GX | Biocide BAL GX | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Biocide BAL P10 | Biocide BAL P10 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Biocide BALK 10 | Biocide BALK 10 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | biocil-I | biocil-I | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | BIOMATE MBC781 | BIOMATE MBC781 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | France Algue 222 | France Algue 222 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | GEWA B 352 | GEWA B 352 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | HCT-B-71 | HCT-B-71 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | O’RIZON 415 | O’RIZON 415 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | rascal-B-71 | rascal-B-71 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | WANSON W23L | WANSON W23L | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | watERTreat BIO253 B | watERTreat BIO253 B | Market area: EU | Market area: EU | Market area: EU |
| Authorisation number | Authorisation number | Authorisation number | EU-0025449-0007 1-3 | EU-0025449-0007 1-3 | EU-0025449-0007 1-3 | ||
| Common name | IUPAC name | Function | Function | CAS number | CAS number | EC number | Content (%) |
| C(M)IT/MIT (3:1) | Reaction mass of 5-chloro-2-methyl-2h-isothiazol-3-one and 2-methyl-2h-isothiazol-3-one (3:1) | Active substance | Active substance | 55965-84-9 | 55965-84-9 | 2,3 % (w/w) |
7.5. Trade name(s), authorisation number and specific composition of each individual product
| Trade name(s) | Trade name(s) | Trade name(s) | KATHON™ CF 150 Biocide | KATHON™ CF 150 Biocide | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | KATHON™ CF-150 Biocide | KATHON™ CF-150 Biocide | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | KATHON™ CF-150 | KATHON™ CF-150 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | AAHS BI | AAHS BI | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | ACN Green Line 802 | ACN Green Line 802 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | AQ 616 | AQ 616 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | AQF 415 | AQF 415 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | AQUATREAT 415 | AQUATREAT 415 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | ATN JB48 | ATN JB48 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | BAL 200BI | BAL 200BI | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Bewacid B 728 | Bewacid B 728 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Biocheck WB CF | Biocheck WB CF | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Biocheck 3103 CF | Biocheck 3103 CF | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Biocide 515 | Biocide 515 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Biocide KT200 | Biocide KT200 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | BioCheck KT | BioCheck KT | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | BIOCONTROL 5 | BIOCONTROL 5 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | BIOMATE MBC781E | BIOMATE MBC781E | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | BiopleX TZ 150 | BiopleX TZ 150 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Bio-Safe KT200 | Bio-Safe KT200 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Biotech 103 | Biotech 103 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | B203 | B203 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | BW 415 | BW 415 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | BS4005A | BS4005A | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Busan 1078 | Busan 1078 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Butrol 1078 | Butrol 1078 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Bulab 8862 | Bulab 8862 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Bulab 6057 | Bulab 6057 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Carillion ITA | Carillion ITA | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Certi-KT200 | Certi-KT200 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | CH32 | CH32 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | ComChem Bio ITA | ComChem Bio ITA | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Dab 448 | Dab 448 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Deep Bio® 20 | Deep Bio® 20 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | DIABICIDE 90 A | DIABICIDE 90 A | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | DIPOLIQUE 156 | DIPOLIQUE 156 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Ecoral 1015 | Ecoral 1015 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Ecosafe Bio WT | Ecosafe Bio WT | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Ekobio-5 | Ekobio-5 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | ES515 | ES515 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | FINEALGUA ME | FINEALGUA ME | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | GE32 | GE32 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Hydrex™ 7943 | Hydrex™ 7943 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | HCS B32 | HCS B32 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | In-Boi | In-Boi | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Isocil® Ultra 1.5 | Isocil® Ultra 1.5 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Isotreat | Isotreat | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | IWT KT200 | IWT KT200 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | KT200 | KT200 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Lubron BD 100 | Lubron BD 100 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Lubron BD 110 | Lubron BD 110 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Lubron BD 120 | Lubron BD 120 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | MB 215 | MB 215 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Mikrobizid M 24 | Mikrobizid M 24 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | MIRECIDE-KW/600 | MIRECIDE-KW/600 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | MIRECIDE-KW/600.X | MIRECIDE-KW/600.X | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Novocide 10 | Novocide 10 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Novo Cide 10 | Novo Cide 10 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | NW515 | NW515 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | OS Isobio 1.5 | OS Isobio 1.5 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | PA32 | PA32 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | PH-SB102 | PH-SB102 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | PS 2176 | PS 2176 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | QUIPROISO LG | QUIPROISO LG | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | RAL200 | RAL200 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Relcide 310 | Relcide 310 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Sayvol Bio LP | Sayvol Bio LP | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | ST202 | ST202 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Starcide Ultra 1.5 | Starcide Ultra 1.5 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Swiftclean BI | Swiftclean BI | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | UPINZOL -10 | UPINZOL -10 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Wacozid 3150 | Wacozid 3150 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Wacozid 3150 CF | Wacozid 3150 CF | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Watercare WHM KT200 | Watercare WHM KT200 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | “hygel“ KW 60 B | “hygel“ KW 60 B | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | BioCheck KT200 | BioCheck KT200 | Market area: EU | Market area: EU | Market area: EU |
| Authorisation number | Authorisation number | Authorisation number | EU-0025449-0008 1-3 | EU-0025449-0008 1-3 | EU-0025449-0008 1-3 | ||
| Common name | IUPAC name | Function | Function | CAS number | CAS number | EC number | Content (%) |
| C(M)IT/MIT (3:1) | Reaction mass of 5-chloro-2-methyl-2h-isothiazol-3-one and 2-methyl-2h-isothiazol-3-one (3:1) | Active substance | Active substance | 55965-84-9 | 55965-84-9 | 2,3 % (w/w) |
7.6. Trade name(s), authorisation number and specific composition of each individual product
| Trade name(s) | Trade name(s) | Trade name(s) | KATHON™ CG/ICP Biocide | KATHON™ CG/ICP Biocide | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | KATHON™ CG-ICP | KATHON™ CG-ICP | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | KATHON™ CG/ICP Preservative | KATHON™ CG/ICP Preservative | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | KATHON™ MK Biocide | KATHON™ MK Biocide | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Biocide KT200ICP | Biocide KT200ICP | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Biogat CG ICP | Biogat CG ICP | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | Isocil® HP 1.5 | Isocil® HP 1.5 | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | MIRECIDE-KW/24 | MIRECIDE-KW/24 | Market area: EU | Market area: EU | Market area: EU |
| Authorisation number | Authorisation number | Authorisation number | EU-0025449-0009 1-3 | EU-0025449-0009 1-3 | EU-0025449-0009 1-3 | ||
| Common name | IUPAC name | Function | Function | CAS number | CAS number | EC number | Content (%) |
| C(M)IT/MIT (3:1) | Reaction mass of 5-chloro-2-methyl-2h-isothiazol-3-one and 2-methyl-2h-isothiazol-3-one (3:1) | Active substance | Active substance | 55965-84-9 | 55965-84-9 | 2,2 % (w/w) |
7.7. Trade name(s), authorisation number and specific composition of each individual product
| Trade name(s) | Trade name(s) | Trade name(s) | KATHON™ CG/ICPII Biocide | KATHON™ CG/ICPII Biocide | Market area: EU | Market area: EU | Market area: EU |
| Authorisation number | Authorisation number | Authorisation number | EU-0025449-0010 1-3 | EU-0025449-0010 1-3 | EU-0025449-0010 1-3 | ||
| Common name | IUPAC name | Function | Function | CAS number | CAS number | EC number | Content (%) |
| C(M)IT/MIT (3:1) | Reaction mass of 5-chloro-2-methyl-2h-isothiazol-3-one and 2-methyl-2h-isothiazol-3-one (3:1) | Active substance | Active substance | 55965-84-9 | 55965-84-9 | 2,2 % (w/w) |
7.8. Trade name(s), authorisation number and specific composition of each individual product
| Trade name(s) | Trade name(s) | Trade name(s) | KATHON™ CL 150 Biocide | KATHON™ CL 150 Biocide | Market area: EU | Market area: EU | Market area: EU |
| Trade name(s) | Trade name(s) | Trade name(s) | SPECTRUS NX1164 | SPECTRUS NX1164 | Market area: EU | Market area: EU | Market area: EU |
| Authorisation number | Authorisation number | Authorisation number | EU-0025449-0011 1-3 | EU-0025449-0011 1-3 | EU-0025449-0011 1-3 | ||
| Common name | IUPAC name | Function | Function | CAS number | CAS number | EC number | Content (%) |
| C(M)IT/MIT (3:1) | Reaction mass of 5-chloro-2-methyl-2h-isothiazol-3-one and 2-methyl-2h-isothiazol-3-one (3:1) | Active substance | Active substance | 55965-84-9 | 55965-84-9 | 2,2 % (w/w) |
1. META SPC 4 ADMINISTRATIVE INFORMATION
1.1. Meta SPC 4 identifier
| Identifier | Meta SPC: meta-SPC 4 KATHON 1.5-3.5 Na |
1.2. Suffix to the authorisation number
| Number | 1-4 |
1.3. Product type(s)
| Product type(s) | PT02: Disinfectants and algaecides not intended for direct application to humans or animals PT04: Food and feed area PT06: Preservatives for products during storage PT11: Preservatives for liquid-cooling and processing systems PT12: Slimicides |
2. META SPC 4 COMPOSITION
2.1. Qualitative and quantitative information on the composition of the meta SPC 4
| Common name | IUPAC name | Function | CAS number | EC number | Content (%) |
| C(M)IT/MIT (3:1) | Reaction mass of 5-chloro-2-methyl-2h-isothiazol-3-one and 2-methyl-2h-isothiazol-3-one (3:1) | Active substance | 55965-84-9 | 2,2 - 5,1 % (w/w) |
2.2. Type(s) of formulation of the meta SPC 4
| Formulation type(s) | AL Any other liquid |
3. HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 4
| Hazard statements | H332: Harmful if inhaled. H314: Causes severe skin burns and eye damage. H317: May cause an allergic skin reaction. H410: Very toxic to aquatic life with long lasting effects. H302: Harmful if swallowed. EUH071: Corrosive to the respiratory tract. |
| Precautionary statements | P260: Do not breathe fume. P264: Wash skin thoroughly after handling. P270: Do not eat, drink or smoke when using this product. P272: Contaminated work clothing should not be allowed out of the workplace. P273: Avoid release to the environment. P280: Wear protective gloves/ protective clothing/ eye protection/ face protection/ hearing protection . P362+P364: Take off contaminated clothing and wash it before reuse. P333+P313: If skin irritation or rash occurs: Get medical advice. P301+P330+P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting. P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing. P310: Immediately call a POISON CENTER/ doctor . P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P391: Collect spillage. P405: Store locked up. P301+P312: IF SWALLOWED: Call a POISON CENTER/ doctor if you feel unwell. |
4. AUTHORISED USE(S) OF THE META SPC
4.1. Use description
Table 1
Preservation of sump water in air conditioning and air washer systems.
| Product type | PT02: Disinfectants and algaecides not intended for direct application to humans or animals |
| Where relevant, an exact description of the authorised use | - |
| Target organism(s) (including development stage) | Scientific name: no data Common name: Bacteria (including Legionella pneumophila) Development stage: no data Scientific name: no data Common name: Yeasts Development stage: no data Scientific name: no data Common name: fungi Development stage: no data Scientific name: no data Common name: algae Development stage: no data |
| Field(s) of use | outdoor use Preservation of sump water in air conditioning and air washer systems. Air conditioning systems and in air washer systems to preserve the sump water. Air washer systems are used extensively in textile factories and in the tobacco industry to scrub or clean the air and for fine control of temperature and humidity. |
| Application method(s) | Method: Open and closed Systems Detailed description: Automatic and Manual Dosing The biocidal product is typically added in a central chilled water sump which supplies several air washers. The loading process may be conducted either manually or by automation. In the automated process, the biocide is metered directly into the sump from a holding tank or other type of bulk container by a dosimeter (pump). The feeding pipe must dose the biocidal product below the water level in order to limit its evaporation. |
| Application rate(s) and frequency | Application Rate: Curative application: Bacteria, yeasts and fungi. When the system is noticeably fouled, apply 5 to 14,9 mg C(M)IT/MIT (3:1) per Litre of water to be treated, as post treatment after a shock dose of minimum 0,3 ppm of free chlorine. Preventive application: algae When control is obtained, add a continuous or semi continuous feed of 3 to 5 mg C(M)IT/MIT (3:1) per L of water to be treated - Number and timing of application: Curative application: Bacteria, yeasts and fungi When the system is noticeably fouled, apply 5 to 14,9 mg C(M)IT/MIT (3:1) per Litre of water to be treated, as post treatment after a shock dose of minimum 0,3 ppm of free chlorine. Contact time of 1 hour. Preventive application: algae When control is obtained, add a continuous or semi continuous feed of 3 to 5 mg C(M)IT/MIT (3:1) per L of water to be treated. Regardless of the manner of treatment, the total concentration of the active ingredient C(M)IT/MIT (3:1) in the system should not exceed 14,9 mg/L in the sump water. Preliminary steps prior to addition: The biocidal product is automatically dosed to the system. Manual handling is necessary for the loading of the biocidal product into the dosing systems. Application Frequency: Nominally every 2 to 3 days or as needed to obtain control. Repeat until fouling is reduced to an acceptable level for controlling the microbial growth. |
| Category(ies) of users | industrial |
| Pack sizes and packaging material | For industrial and professional users: — HDPE flask: 5 L (nominal) — HDPE Pail / Jerrycan: 10 L, 20 L, 25 L, 30 L (nominal) — Box with HDPE liner: 20 L — HDPE Drum: 110 L, 120 L, 200 L, 260 L — HDPE IBC: 650 L, 800 L, 1 000 L, 1 250 L All products should be transport and stored in a vented room. |
4.1.1. Use-specific instructions for use
- — Respect the conditions of use of the product (concentration, contact time, temperature, pH, etc.).
- — The CMIT/MIT biocidal products are used after a shock dose of free chlorine in this application as standard industry practice.
4.1.2. Use-specific risk mitigation measures
- — Rinse the system (especially the dispensing pumps) with water prior to perform the cleaning step.
- — During mixing and loading and cleaning of the dispensing pumps, exposure to the product (corrosive and skin sensitizer product) has to be limited by use of PPE and application of technical and organisational RMM:
- — Minimisation of manual phases (process automation);
- — Use of a dosing device;
- — Regular cleaning of equipment and work area;
- — Avoidance of contact with contaminated tools and objects;
- — Good standard of general ventilation;
- — Training and management of staff on good practice.
- — PPE is as follows:
- — protective chemical resistant gloves (glove material to be specified by the authorisation holder within the product information);
- — protective coverall (at least type 3 or 4, EN 14605) which is impermeable for the biocidal product shall be worn (coverall material to be specified by the authorisation holder within the product information);
- — Eye protection;
- — Substance/task appropriate respirator if ventilation is inadequate.
4.1.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use.
4.1.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use.
4.1.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use.
4.2. Use description
Table 2
Preservation of fluids in conveyor belts and pasteurisers
| Product type | PT04: Food and feed area |
| Where relevant, an exact description of the authorised use | - |
| Target organism(s) (including development stage) | Scientific name: no data Common name: Bacteria Development stage: no data Scientific name: no data Common name: Yeasts Development stage: no data Scientific name: no data Common name: fungi Development stage: no data |
| Field(s) of use | indoor use Preservation of fluids in conveyor belts and pasteurisers The biocidal product is used for the preservation of process fluids in pasteurisers and conveyor belts used in food industry. The biocidal product is used in these systems to either control or kill bacteria and fungi. |
| Application method(s) | Method: closed system Detailed description: Automated dosing The biocidal product is dosed automatically in the heat transfer fluid, in a place of good mixing (e.g. collecting sump below the conveyor belt). |
| Application rate(s) and frequency | Application Rate: Curative application: Bacteria, yeasts and fungi When the system is noticeably fouled, apply 10 to 14,9 g C(M)IT/MIT (3:1) per m3 of water to be treated as post treatment after a shock dose of minimum 0,3 ppm of free chlorine Preventive application: Bacteria: When control is obtained, add a continuous or semi continuous feed of 2,5 to 5 g C(M)IT/MIT (3:1) per m3 of water to be treated. - Number and timing of application: Curative application: Bacteria, yeasts and fungi When the system is noticeably fouled, apply 10 to 14,9 g C(M)IT/MIT (3:1) per m3 of water to be treated as post treatment after a shock dose of minimum 0,3 ppm of free chlorine. Contact time of 1 hour. Preventive application: Bacteria: When control is obtained, add a continuous or semi continuous feed of 2,5 to 5 g C(M)IT/MIT (3:1) per m3 of water to be treated. Preliminary steps prior to addition: The biocidal product is automatically dosed to system. Manual handling is necessary for the loading of containers containing the biocidal product into the dosing systems. Application Frequency: Nominally every 2 to 3 days or as needed to obtain control. Repeat until fouling is reduced to an acceptable level for controlling the microbial growth. |
| Category(ies) of users | industrial |
| Pack sizes and packaging material | For industrial and professional users: — HDPE flask: 5 L (nominal) — HDPE Pail / Jerrycan: 10 L, 20 L, 25 L, 30 L (nominal) — Box with HDPE liner: 20 L — HDPE Drum: 110 L, 120 L, 200 L, 260 L — HDPE IBC: 650 L, 800 L, 1 000 L, 1 250 L All products should be transport and stored in a vented room. |
4.2.1. Use-specific instructions for use
- — Respect the conditions of use of the product (concentration, contact time, temperature, pH, etc.).
- — The CMIT/MIT biocidal products are used after a shock dose of free chlorine in this application as standard industry practice.
4.2.2. Use-specific risk mitigation measures
- — Rinse the system (especially the dispensing pumps) with water prior to perform the cleaning step.
- — During mixing and loading and cleaning of the dispensing pumps, exposure to the product (corrosive and skin sensitizer product) has to be limited by use of PPE and application of technical and organisational RMM:
- — Minimisation of manual phases (process automation);
- — Use of a dosing device;
- — Regular cleaning of equipment and work area;
- — Avoidance of contact with contaminated tools and objects;
- — Good standard of general ventilation;
- — Training and management of staff on good practice.
- — PPE is as follows:
- — protective chemical resistant gloves (glove material to be specified by the authorisation holder within the product information);
- — protective coverall (at least type 3 or 4, EN 14605) which is impermeable for the biocidal product shall be worn (coverall material to be specified by the authorisation holder within the product information);
- — Eye protection;
- — Substance/task appropriate respirator if ventilation is inadequate.
4.2.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use.
4.2.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use.
4.2.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use.
4.3. Use description
Table 3
Long term offline preservation of reverse osmosis membranes used in potable water
| Product type | PT04: Food and feed area |
| Where relevant, an exact description of the authorised use | - |
| Target organism(s) (including development stage) | Scientific name: no data Common name: Bacteria Development stage: no data |
| Field(s) of use | indoor use Long term offline preservation of reverse osmosis membranes used in potable water The C(M)IT/MIT (3:1) biocidal product is recommended for controlling biological growth in off-line trains reverse osmosis membranes producing potable water for extended periods of time. |
| Application method(s) | Method: closed system Detailed description: Manual and automated dosing. It is recommended that fouled membranes be cleaned prior to shut-down and preservation. Please refer to RO /NF supplier manual for membrane cleaning and system shutdown procedures. The biocidal product should be dispensed as a tankside additive into the circulating use-dilution of the fluid, using a metering pump or by manual pouring, at a point to assure adequate mixing throughout the system. After complete filling of the trains RO/NF systems with the biocide solution, pumps are stopped (Off line treatment) for extended periods of time. Typically C(M)IT/MIT (3:1) solutions are prepared in the CIP (cleaning in place) tank and added via the dosing system. Dilution with the permeate water or high quality water is recommended for the preparation of the biocide solution. Membranes should be soaked in the biocide solution during the shut-down period. |
| Application rate(s) and frequency | Application Rate: 7,5 -20 g of C(M)IT/MIT (3:1)/ m3 of water - Number and timing of application: 7,5 -20 g of C(M)IT/MIT (3:1)/ m3 of water |
| Category(ies) of users | industrial |
| Pack sizes and packaging material | For industrial and professional users: — HDPE flask: 5 L (nominal) — HDPE Pail / Jerrycan: 10 L, 20 L, 25 L, 30 L (nominal) — Box with HDPE liner: 20 L — HDPE Drum: 110 L, 120 L, 200 L, 260 L — HDPE IBC: 650 L, 800 L, 1 000 L, 1 250 L All products should be transport and stored in a vented room. |
4.3.1. Use-specific instructions for use
- — Respect the conditions of use of the product (concentration, contact time, temperature, pH, etc.).
- — Prior to taking the membranes back on-line, flush carefully the elements with permeate water in order to eliminate all the residual biocidal product.
4.3.2. Use-specific risk mitigation measures
- — Rinse the system (especially the dispensing pumps) with water prior to perform the cleaning step.
- — During mixing and loading and cleaning of the whole system, exposure to the product (corrosive and skin sensitizer product) has to be limited by use of PPE and application of technical and organisational RMM:
- — Minimisation of manual phases (process automation);
- — Use of a dosing device;
- — Regular cleaning of equipment and work area;
- — Avoidance of contact with contaminated tools and objects;
- — Good standard of general ventilation;
- — Training and management of staff on good practice.
- — PPE is as follows:
- — protective chemical resistant gloves (glove material to be specified by the authorisation holder within the product information);
- — protective coverall (at least type 3 or 4, EN 14605) which is impermeable for the biocidal product shall be worn (coverall material to be specified by the authorisation holder within the product information);
- — Eye protection;
- — Substance/task appropriate respirator if ventilation is inadequate.
4.3.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use.
4.3.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use.
4.3.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use.
4.4. Use description
Table 4
Preservation of paints and coatings
| Product type | PT06: Preservatives for products during storage |
| Where relevant, an exact description of the authorised use | - |
| Target organism(s) (including development stage) | Scientific name: no data Common name: Bacteria Development stage: no data Scientific name: no data Common name: Yeasts Development stage: no data |
| Field(s) of use | indoor use outdoor use Preservation of paints and coatings (including electrodeposition) The biocidal product is recommended to control the growth of bacteria and yeasts in coatings applied by an electrodeposition process and associated rinse systems and in water-based paints and coatings in storage containers before use. |
| Application method(s) | Method: closed system Detailed description: Manual and automated dosing. The biocidal product should be dispensed as a tankside additive into the fluid, using a metering pump or by manual pouring, at a point to assure adequate mixing throughout the system. |
| Application rate(s) and frequency | Application Rate: Industrial uses: 1,5 - 14,5 % C(M)IT/MIT in the biocidal products; Professional paints and general public paints: 7,5-14,9 mg/kg C(M)IT/MIT (3:1) in final product. - Number and timing of application: The biocidal product is added at the time of manufacture, storage or shipment. Industrial uses: 1,5 - 14,5 % C(M)IT/MIT in the biocidal products. Professional paints and general public paints: 7,5-14,9 mg/kg C(M)IT/MIT (3:1) in final product. For the biocidal product as supplied: for industrial use only. |
| Category(ies) of users | industrial |
| Pack sizes and packaging material | For industrial and professional users: — HDPE flask: 5 L (nominal) — HDPE Pail / Jerrycan: 10 L, 20 L, 25 L, 30 L (nominal) — Box with HDPE liner: 20 L — HDPE Drum: 110 L, 120 L, 200 L, 260 L — HDPE IBC: 650 L, 800 L, 1 000 L, 1 250 L All products should be transport and stored in a vented room. |
4.4.1. Use-specific instructions for use
- — The preservative can be added at any stage of the production of the product.
- — Earliest possible addition is recommended for optimal protection.
- — Consult the manufacturer to determine the optimal dosage for the various products to be preserved.
- — It is recommended that the optimum biocide concentration and compatibility with individual formulations is determined by means of laboratory tests.
- — The duration and storage conditions of the preserved matrices may impact the efficacy of the product, microbiological tests should be conducted to determine the appropriate application rate without exceeding the maximum authorised application rate.
- — The biocidal product shall be used for treatment of products (articles/mixtures) distributed to professional users and to the general public.
4.4.2. Use-specific risk mitigation measures
- — During handling phases of products from Meta SPC 1, 2, 3 and 4 (Mixing and Loading), exposure to the product (corrosive and skin sensitizer products) has to be limited by use of PPE and application of technical and organisational RMM:
- — Minimisation of manual phases (process automation);
- — Use of a dosing device;
- — Regular cleaning of equipment and work area;
- — Avoidance of contact with contaminated tools and objects;
- — Good standard of general ventilation;
- — Training and management of staff on good practice.
- — PPE is as follows:
- — protective chemical resistant gloves (glove material to be specified by the authorisation holder within the product information);
- — protective coverall (at least type 3 or 4, EN 14605) which is impermeable for the biocidal product shall be worn (coverall material to be specified by the authorisation holder within the product information);
- — Eye protection;
- — Substance/task appropriate respirator if ventilation is inadequate.
- — The maximal concentration of products from Meta SPC 1, 2, 3 and 4 to be added in paints used must be below the threshold value of 15 ppm.
4.4.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use.
4.4.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use.
4.4.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use.
4.5. Use description
Table 5
Preservation of fluids used in paper, textile and leather production - Curative treatment
| Product type | PT06: Preservatives for products during storage |
| Where relevant, an exact description of the authorised use | - |
| Target organism(s) (including development stage) | Scientific name: no data Common name: Bacteria Development stage: no data |
| Field(s) of use | indoor use Preservation of fluids used in paper, textile and leather production - The biocidal product is used to reduce contamination by bacteria in textile additives (woven and non-woven, natural and synthetic including silicone emulsions) processing chemicals, all chemicals used in the leather process industry and paper additives (e.g. water pigment pastes, starch, natural gums, synthetic and natural latexes, sizing agents, coating binders, retention aids, dyes, fluorescent whitening agents, wet-strength resins) used in paper mills. The biocidal product inhibits the growth microorganisms, which would otherwise lead to odours formation, viscosity alteration, discolouration of product and premature product failure. |
| Application method(s) | Method: closed system Detailed description: Manual and automated dosing. The biocidal product should be dispensed to the end use fluid at a point to ensure adequate mixing using preferably automated metering pump or by manual addition. |
| Application rate(s) and frequency | Application Rate: Industrial uses: 1,5 - 14,5 % C(M)IT/MIT in the biocidal products; Professional uses: 16 to 30 mg/kg of C(M)IT/MIT (3:1) in final product - Number and timing of application: The biocidal product is added at single dose at time of manufacturing, storage or shipment. Industrial uses: 1,5 - 14,5 % C(M)IT/MIT in the biocidal products. Professional uses: Curative treatment: 16 to 30 mg/kg of C(M)IT/MIT (3:1) in final product Contact time: 24 hours For the biocidal product as supplied: for industrial use only. |
| Category(ies) of users | industrial |
| Pack sizes and packaging material | For industrial and professional users: — HDPE flask: 5 L (nominal) — HDPE Pail / Jerrycan: 10 L, 20 L, 25 L, 30 L (nominal) — Box with HDPE liner: 20 L — HDPE Drum: 110 L, 120 L, 200 L, 260 L — HDPE IBC: 650 L, 800 L, 1 000 L, 1 250 L All products should be transport and stored in a vented room. |
4.5.1. Use-specific instructions for use
- — The preservative can be added at any stage of the production of the product.
- — Earliest possible addition is recommended for optimal protection.
- — Consult the manufacturer to determine the optimal dosage for the various products to be preserved.
- — It is recommended that the optimum biocide concentration and compatibility with individual formulations is determined by means of laboratory tests.
- — The duration and storage conditions of the preserved matrices may impact the efficacy of the product, microbiological tests should be conducted to determine the appropriate application rate without exceeding the maximum authorised application rate.
- — The biocidal product shall be used for treatment of products (articles/mixtures) distributed only to professional users.
4.5.2. Use-specific risk mitigation measures
- — During handling phases of products from Meta SPC 1, 2, 3 and 4 (mixing and loading), exposure to the product (corrosive and skin sensitizer products) has to be limited by use of PPE and application of technical and organisational RMM:
- — Minimisation of manual phases (process automation);
- — Use of a dosing device;
- — Regular cleaning of equipment and work area;
- — Avoidance of contact with contaminated tools and objects;
- — Good standard of general ventilation;
- — Training and management of staff on good practice.
- — PPE is as follows:
- — protective chemical resistant gloves (glove material to be specified by the authorisation holder within the product information);
- — protective coverall (at least type 3 or 4, EN 14605) which is impermeable for the biocidal product shall be worn (coverall material to be specified by the authorisation holder within the product information);
- — Eye protection;
- — Substance/task appropriate respirator if ventilation is inadequate.
- — The maximal products concentration used for the preservation of fluids used in paper, textile and leather production being above the threshold value of 15 ppm, exposure has to be limited by use of PPE protecting skin and mucous membranes potentially exposed and application of technical and organisational RMM:
- — Minimisation of manual phases;
- — Use of a dosing device;
- — Regular cleaning of equipment and work area;
- — Avoidance of contact with contaminated tools and objects;
- — Good standard of general ventilation;
- — Training and management of staff on good practice.
4.5.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use.
4.5.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use.
4.5.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use.
4.6. Use description
Table 6
Preservation of glues and adhesives
| Product type | PT06: Preservatives for products during storage |
| Where relevant, an exact description of the authorised use | - |
| Target organism(s) (including development stage) | Scientific name: no data Common name: Bacteria Development stage: no data Scientific name: no data Common name: Yeasts Development stage: no data |
| Field(s) of use | indoor use Preservation of glues and adhesives The biocidal product is recommended to control the growth of bacteria and yeasts in water-soluble and water-dispersed synthetic and natural adhesives and tackifiers in storage containers before use |
| Application method(s) | Method: closed system Detailed description: Manual and automated application. The biocidal product should be dispensed to the end use fluid at a point to ensure adequate mixing using preferably automated metering pump or by manual addition. |
| Application rate(s) and frequency | Application Rate: Industrial uses: 1,5 - 14,5 % C(M)IT/MIT in the biocidal products; Professional uses: 8-30 mg/kg C(M)IT/MIT (3:1) in final product. General public uses: 8-14,9 mg/kg C(M)IT/MIT (3:1) in final product. - Number and timing of application: The biocidal product is added at single dose at the time of manufacture, storage or shipment. To ensure uniform distribution, slowly disperse using automated metering or manual addition, into product with agitation. Mix thoroughly until evenly dispersed throughout the product. Industrial uses: 1,5 - 14,5 % C(M)IT/MIT in the biocidal products. Professional uses: 8-30 mg/kg C(M)IT/MIT (3:1) in final product. General public uses: 8-14,9 mg/kg C(M)IT/MIT (3:1) in final product. For the biocidal product as supplied: for industrial use only. |
| Category(ies) of users | industrial |
| Pack sizes and packaging material | For industrial and professional users: — HDPE flask: 5 L (nominal) — HDPE Pail / Jerrycan: 10 L, 20 L, 25 L, 30 L (nominal) — Box with HDPE liner: 20 L — HDPE Drum: 110 L, 120 L, 200 L, 260 L — HDPE IBC: 650 L, 800 L, 1 000 L, 1 250 L All products should be transport and stored in a vented room. |
4.6.1. Use-specific instructions for use
- — The preservative can be added at any stage of the production of the product.
- — Earliest possible addition is recommended for optimal protection.
- — Consult the manufacturer to determine the optimal dosage for the various products to be preserved.
- — It is recommended that the optimum biocide concentration and compatibility with individual formulations is determined by means of laboratory tests.
- — The duration and storage conditions of the preserved matrices may impact the efficacy of the product, microbiological tests should be conducted to determine the appropriate application rate without exceeding the maximum authorised application rate.
- — The biocidal product shall be used for treatment of products (articles/mixtures) distributed to professional users and to the general public. For products distributed to the general public the maximal concentration used must be below the threshold value of 15 ppm.
4.6.2. Use-specific risk mitigation measures
- — During handling phases of products from Meta SPC 1, 2, 3 and 4 (mixing and loading), exposure to the product (corrosive and skin sensitizer products) has to be limited by use of PPE and application of technical and organisational RMM:
- — Minimisation of manual phases (process automation);
- — Use of a dosing device;
- — Regular cleaning of equipment and work area;
- — Avoidance of contact with contaminated tools and objects;
- — Good standard of general ventilation;
- — Training and management of staff on good practice.
- — PPE is as follows:
- — protective chemical resistant gloves (glove material to be specified by the authorisation holder within the product information);
- — protective coverall (at least type 3 or 4, EN 14605) which is impermeable for the biocidal product shall be worn (coverall material to be specified by the authorisation holder within the product information);
- — Eye protection;
- — Substance/task appropriate respirator if ventilation is inadequate.
- — For professional users, the maximal products concentration used for the preservation of glues and adhesives being above the threshold value of 15 ppm, exposure has to be limited by use of PPE, protecting skin and mucous membranes potentially exposed, and application of technical and organisational RMM:
- — Minimisation of manual phases;
- — Use of a dosing device;
- — Regular cleaning of equipment and work area;
- — Good standard of general ventilation;
- — Training and management of staff on good practice.
4.6.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use.
4.6.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use.
4.6.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use.
4.7. Use description
Table 7
Preservation of polymer lattices
| Product type | PT06: Preservatives for products during storage |
| Where relevant, an exact description of the authorised use | - |
| Target organism(s) (including development stage) | Scientific name: no data Common name: Bacteria Development stage: no data Scientific name: no data Common name: Yeasts Development stage: no data Scientific name: no data Common name: fungi Development stage: no data |
| Field(s) of use | indoor use Preservation of polymer latexes The biocidal product is recommended for the control of bacteria, yeast and fungi in the manufacture, storage, and transport of latexes, synthetic polymers including Hydrolysed Poly Acryl Amide (HPAM) and biopolymers (e.g. xanthan, dextran..) natural latexes. |
| Application method(s) | Method: closed system Detailed description: Manual and automated application. The biocidal product should be dispensed to the end use fluid at a point to ensure adequate mixing using preferably automated metering pump or by manual addition. |
| Application rate(s) and frequency | Application Rate: Industrial uses: 1,5 - 14,5 % C(M)IT/MIT in the biocidal products; Professional uses: 14,9 - 50 mg /kg of C(M)IT/MIT (3:1) in final product. - Number and timing of application: The biocidal product is added at single dose at the time of manufacture, storage or shipment. To ensure uniform distribution, slowly disperse using automated metering or manual addition, into product with agitation. Mix thoroughly until evenly dispersed throughout the product. Industrial uses: 1,5 - 14,5 % C(M)IT/MIT in the biocidal products. Professional uses 14,9 - 50 mg /kg of C(M)IT/MIT (3:1) in final product. For the biocidal product as supplied: for industrial use only. |
| Category(ies) of users | industrial |
| Pack sizes and packaging material | For industrial and professional users: — HDPE flask: 5 L (nominal) — HDPE Pail / Jerrycan: 10 L, 20 L, 25 L, 30 L (nominal) — Box with HDPE liner: 20 L — HDPE Drum: 110 L, 120 L, 200 L, 260 L — HDPE IBC: 650 L, 800 L, 1 000 L, 1 250 L All products should be transport and stored in a vented room. |
4.7.1. Use-specific instructions for use
- — The preservative can be added at any stage of the production of the product.
- — Earliest possible addition is recommended for optimal protection.
- — Consult the manufacturer to determine the optimal dosage for the various products to be preserved.
- — It is recommended that the optimum biocide concentration and compatibility with individual formulations is determined by means of laboratory tests.
- — The duration and storage conditions of the preserved matrices may impact the efficacy of the product, microbiological tests should be conducted to determine the appropriate application rate without exceeding the maximum authorised application rate.
- — The biocidal product shall be used for treatment of products (articles/mixtures) distributed only to professional users.
4.7.2. Use-specific risk mitigation measures
- — During handling phases of products from Meta SPC 1, 2, 3 and 4 (mixing and loading), exposure to the product (corrosive and skin sensitizer products) has to be limited by use of PPE and application of technical and organisational RMM:
- — Minimisation of manual phases (process automation);
- — Use of a dosing device;
- — Regular cleaning of equipment and work area;
- — Avoidance of contact with contaminated tools and objects;
- — Good standard of general ventilation;
- — Training and management of staff on good practice.
- — PPE is as follows:
- — protective chemical resistant gloves (glove material to be specified by the authorisation holder within the product information);
- — protective coverall (at least type 3 or 4, EN 14605) which is impermeable for the biocidal product shall be worn (coverall material to be specified by the authorisation holder within the product information);
- — Eye protection;
- — Substance/task appropriate respirator if ventilation is inadequate.
- — The maximal products concentration used for the preservation of polymer lattices being above the threshold value of 15 ppm, exposure has to be limited by use of PPE, protecting skin and mucous membranes potentially exposed, and application of technical and organisational RMM:
- — Minimisation of manual phases;
- — Use of a dosing device;
- — Regular cleaning of equipment and work area;
- — Good standard of general ventilation;
- — Training and management of staff on good practice.
4.7.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use.
4.7.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use.
4.7.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use.
4.8. Use description
Table 8
Preservation of mineral slurries
Reading this document does not replace reading the official text published in the Official Journal of the European Union. We assume no responsibility for any inaccuracies arising from the conversion of the original to this format.
This text is published under EUR-Lex's own terms of reuse, not a Legalize or public-domain licence.
EUR-Lex
Creative Commons Attribution 4.0 International (CC BY 4.0)
© European Union, https://eur-lex.europa.eu — Source: EUR-Lex (Publications Office of the European Union). Reused under the Creative Commons Attribution 4.0 International (CC BY 4.0) licence. Only EU legislation published in the printed Official Journal of the European Union is deemed authentic; consolidated texts are reproduced here for documentation purposes and have been reformatted to Markdown.