LegalizeCommission Implementing Regulation (EU) 2025/2215 of 31 October 2025 amending Implementing Regulation (EU) 2022/964 as regards administrative changes to the Union authorisation for the biocidal product family SOPUROXID
This is the act as published. Later amendments are not folded into the text below: each one is a separate act in this repository and an entry in this law's history.
| Image omitted; see official source | Official Journal of the European Union | EN L series |
| --- | --- | --- |
| 2025/2215 | 14.11.2025 |
THE EUROPEAN COMMISSION,
Having regard to the Treaty on the Functioning of the European Union,
Having regard to Regulation (EU) No 528/2012 of the European Parliament and of the Council of 22 May 2012 concerning the making available on the market and use of biocidal products [^ntr1-L_202502215EN.000101-E0001], and in particular Article 50(2) thereof,
Whereas:
- (1) On 10 June 2022, Commission Implementing Regulation (EU) 2022/964 [^ntr2-L_202502215EN.000101-E0002] granted a Union authorisation, under number EU-0026179-0000, to SOPURA for the making available on the market and use of the biocidal product family ‘SOPUROXID’. The Annex to that Implementing Regulation provides a summary of the biocidal product characteristics for that biocidal product family.
- (2) On 15 November 2022, SOPURA submitted to the European Chemicals Agency (‘the Agency’), in accordance with Article 11(1) of Commission Implementing Regulation (EU) No 354/2013 [^ntr3-L_202502215EN.000101-E0003], a notification of administrative changes to the Union authorisation for the biocidal product family ‘SOPUROXID’, as referred to in Title 1 of the Annex to that Regulation. The notification was recorded in the Register for Biocidal Products (‘the Register’) under case number BC-TW081932-95. The notified proposed changes to that authorisation concern changes to the name of the biocidal product.
- (3) On 9 January 2023, the Agency submitted to the Commission, in accordance with Article 11(3) of Implementing Regulation (EU) No 354/2013, an opinion [^ntr4-L_202502215EN.000101-E0004] on the notified administrative changes to the Union authorisation for the biocidal product family ‘SOPUROXID’. In the opinion, the Agency concludes that the proposed changes are administrative changes as referred to in Article 50(3), point (a), of Regulation (EU) No 528/2012 and as specified in Title 1, Section 1, of the Annex to Implementing Regulation (EU) No 354/2013, and that after the implementation of the changes, the conditions of Article 19 of Regulation (EU) No 528/2012 will still be met.
- (4) On 9 January 2023, the Agency transmitted to the Commission a revised summary of the biocidal product characteristics of the Union authorisation for the biocidal product family ‘SOPUROXID’ in all official languages of the Union, covering all administrative changes applied for, in accordance with Article 11(6) of Implementing Regulation (EU) No 354/2013.
- (5) The Commission concurs with the opinion of the Agency and therefore considers it appropriate to amend the Union authorisation for the biocidal product family ‘SOPUROXID’ to introduce the administrative changes requested by SOPURA.
- (6) Except for the amendments regarding the administrative changes, all other information included in the summary of the biocidal product characteristics of ‘SOPUROXID’ as set out in the Annex to Implementing Regulation (EU) 2022/964 remains unchanged.
- (7) In order to enhance clarity and to ease the access of users and interested parties to the consolidated version of the summary of the biocidal product characteristics which is to be published by the Agency, the Annex to Implementing Regulation (EU) 2022/964 should be replaced in its entirety. Due to a change in the format used for the generation of the summary of biocidal product characteristics in the Register in February 2024, the summary of biocidal product characteristics in that Annex should also include some minor editorial and layout changes.
- (8) Implementing Regulation (EU) 2022/964 should therefore be amended accordingly,
HAS ADOPTED THIS REGULATION:
Article 1
The Annex to Implementing Regulation (EU) 2022/964 is replaced by the text set out in the Annex to this Regulation.
Article 2
This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.
This Regulation shall be binding in its entirety and directly applicable in all Member States.
Done at Brussels, 31 October 2025.
For the Commission
The President
Ursula VON DER LEYEN
[^ntr1-L_202502215EN.000101-E0001]: OJ L 167, 27.6.2012, p. 1, ELI: http://data.europa.eu/eli/reg/2012/528/oj.
[^ntr2-L_202502215EN.000101-E0002]: Commission Implementing Regulation (EU) 2022/964 of 10 June 2022 granting a Union authorisation for the biocidal product family ‘SOPUROXID’ (OJ L 166, 22.6.2022, p. 1, ELI: http://data.europa.eu/eli/reg_impl/2022/964/oj).
[^ntr3-L_202502215EN.000101-E0003]: Commission Implementing Regulation (EU) No 354/2013 of 18 April 2013 on changes of biocidal products authorised in accordance with Regulation (EU) No 528/2012 of the European Parliament and of the Council (OJ L 109, 19.4.2013, p. 4, ELI: http://data.europa.eu/eli/reg_impl/2013/354/oj).
[^ntr4-L_202502215EN.000101-E0004]: ECHA opinion UAD-C-1633880-27-00/F of 9 January 2023 on administrative changes of the Union authorisation of the biocidal product family ‘SOPUROXID’, https://echa.europa.eu/documents/10162/3443008/opinion_for_ua-admin_changes_bc-tw081932-95_en.pdf/7d0a4f78-9465-a87e-9c6e-5c0fb13cf6b2?t=1686103128867.
ANNEX
SUMMARY OF PRODUCT CHARACTERISTICS FOR A BIOCIDAL PRODUCT FAMILY
SOPUROXID
Product type(s)
PT02: Disinfectants and algaecides not intended for direct application to humans or animals
PT03: Veterinary hygiene
PT04: Food and feed area
Authorisation number: EU-0026179-0000
R4BP asset number: EU-0026179-0000
PART I
FIRST INFORMATION LEVEL
1. ADMINISTRATIVE INFORMATION
1.1. Family name
| Name | SOPUROXID |
1.2. Product type(s)
| Product type(s) | PT02: Disinfectants and algaecides not intended for direct application to humans or animals PT03: Veterinary hygiene PT04: Food and feed area |
1.3. Authorisation holder
| Name and address of the authorisation holder | Name | SOPURA |
| Name and address of the authorisation holder | Address | Parc paysager de Tyberchamps 14 7180 SENEFFE Belgium |
| Authorisation number | EU-0026179-0000 | |
| R4BP asset number | EU-0026179-0000 | |
| Date of the authorisation | 12 July 2022 | |
| Expiry date of the authorisation | 30 June 2032 |
1.4. Manufacturer(s) of the product
| Name of manufacturer | SOPURA N.V. |
| Address of manufacturer | Rue de Trazegnies 199 6180 COURCELLES Belgium |
| Location of manufacturing sites | SOPURA N.V. site 1 Rue de Trazegnies 199 6180 COURCELLES Belgium |
| --- | --- |
| Name of manufacturer | SOPURA QUIMICA |
| Address of manufacturer | Poligon ‘La Canaleta’, Avinguda Júpiter 7 25300 TARREGA Spain |
| Location of manufacturing sites | SOPURA QUIMICA site 1 Poligon ‘La Canaleta’, Avinguda Júpiter 7 25300 TARREGA Spain |
| --- | --- |
| Name of manufacturer | HYPRED SAS (KERSIA Group) |
| Address of manufacturer | 55, Boulevard Jules Verger (BP 10180) 35803 DINARD France |
| Location of manufacturing sites | HYPRED SAS (KERSIA Group) site 1 55, Boulevard Jules Verger (BP 10180) 35803 DINARD France HYPRED SAS (KERSIA Group) site 2 Niepruszewo, ul. Kasztanowa 64-320 Buk Poland |
1.5. Manufacturer(s) of the active substance(s)
| Active substance | Peracetic acid |
| Name of manufacturer | SOPURA N.V. |
| Address of manufacturer | Rue de Trazegnies 199 6180 COURCELLES Belgium |
| Location of manufacturing sites | SOPURA N.V. site 1 Rue de Trazegnies 199 6180 COURCELLES Belgium |
| --- | --- |
| Active substance | Peracetic acid |
| Name of manufacturer | SOPURA QUIMICA |
| Address of manufacturer | Poligon ‘La Canaleta’, Avinguda Júpiter 7 25300 TARREGA Spain |
| Location of manufacturing sites | SOPURA QUIMICA site 1 Poligon ‘La Canaleta’, Avinguda Júpiter 7 25300 TARREGA Spain |
| --- | --- |
| Active substance | Peracetic acid |
| Name of manufacturer | HYPRED SAS (KERSIA Group) |
| Address of manufacturer | 55, Boulevard Jules Verger (BP 10180) 35803 DINARD France |
| Location of manufacturing sites | HYPRED SAS (KERSIA Group) site 1 55, Boulevard Jules Verger (BP 10180) 35803 DINARD France HYPRED SAS (KERSIA Group) site 2 Niepruszewo, ul. Kasztanowa 64-320 Buk Poland |
2. PRODUCT FAMILY COMPOSITION AND FORMULATION
2.1. Qualitative and quantitative information on the composition of the family
| Common name | IUPAC name | Function | CAS number | EC number | Content (%) |
|---|---|---|---|---|---|
| Peracetic acid | Active substance | 79-21-0 | 201-186-8 | 3,2 -15 % (w/w) | |
| Hydrogen peroxide | Non-active substance | 7722-84-1 | 231-765-0 | 16,5 -23,5 % (w/w) | |
| Acetic acid | Non-active substance | 64-19-7 | 200-580-7 | 5,5 -16,7 % (w/w) | |
| Sulfuric acid | Non-active substance | 7664-93-9 | 231-639-5 | 0,2 -24,04 % (w/w) |
2.2. Type(s) of formulation
| Formulation type(s) | SL Soluble concentrate |
PART II
SECOND INFORMATION LEVEL META SPC(S)
1. META SPC 1 ADMINISTRATIVE INFORMATION
1.1. Meta SPC 1 identifier
| Identifier | Meta SPC: Meta SPC1 |
1.2. Suffix to the authorisation number
| Number | 1-1 |
1.3. Product type(s)
| Product type(s) | PT02: Disinfectants and algaecides not intended for direct application to humans or animals PT03: Veterinary hygiene PT04: Food and feed area |
2. META SPC 1 COMPOSITION
2.1. Qualitative and quantitative information on the composition of the meta SPC 1
| Common name | IUPAC name | Function | CAS number | EC number | Content (%) |
|---|---|---|---|---|---|
| Peracetic acid | Active substance | 79-21-0 | 201-186-8 | 5 -5 % (w/w) | |
| Hydrogen peroxide | Non-active substance | 7722-84-1 | 231-765-0 | 16,5 -22 % (w/w) | |
| Acetic acid | Non-active substance | 64-19-7 | 200-580-7 | 5,5 -9,55 % (w/w) | |
| Sulfuric acid | Non-active substance | 7664-93-9 | 231-639-5 | 0,2 -24,04 % (w/w) |
2.2. Type(s) of formulation of the meta SPC 1
| Formulation type(s) | SL Soluble concentrate |
3. HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 1
| Hazard statements | H272: May intensify fire; oxidiser. H290: May be corrosive to metals. H302+H312+H332: Harmful if swallowed, in contact with skin or if inhaled. H314: Causes severe skin burns and eye damage. H318: Causes serious eye damage. H335: May cause respiratory irritation. H410: Very toxic to aquatic life with long lasting effects. |
| Precautionary statements | P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P280: Wear protective gloves. P280: Wear eye protection. P280: Wear face protection. P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P310: Immediately call a POISON CENTER/doctor. P221: Take any precaution to avoid mixing with combustibles. P261: Avoid breathing vapours. P264: Wash hands thoroughly after handling. P270: Do not eat, drink or smoke when using this product. P271: Use only outdoors or in a well-ventilated area. P321: Specific treatment (see information on this label). P330: Rinse mouth. P363: Wash contaminated clothing before reuse. P301+P312: IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell. P301+P330+P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting. P302+P352: IF ON SKIN: Wash with plenty of water. P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing. P361+P364: Take off immediately all contaminated clothing and wash it before reuse. P405: Store locked up. P403+P233: Store in a well-ventilated place. Keep container tightly closed. P501: Dispose of contents to in accordance with local/regional/national/international regulations. P280: Wear protective clothing. P501: Dispose of container to in accordance with local/regional/national/international regulations. P235: Keep cool. P273: Avoid release to the environment. P391: Collect spillage. P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. P261: Avoid breathing spray. P260: Do not breathe spray. P260: Do not breathe vapours. |
4. AUTHORISED USE(S) OF THE META SPC
4.1. Use description
Table 1
Disinfection of surfaces in industrial, public and non-medical healthcare areas – manual treatment (mopping)
| Product type | PT02: Disinfectants and algaecides not intended for direct application to humans or animals |
| Where relevant, an exact description of the authorised use | — |
| Target organism(s) (including development stage) | Scientific name: No data Common name: Bacteria Development stage: no data Scientific name: no data Common name: Yeasts Development stage: no data |
| Field(s) of use | Indoor use In Industrial, public and non-medical healthcare areas: Disinfection of hard/non-porous surfaces by manual treatment (mopping) with prior cleaning |
| Application method(s) | Method: Manual treatment (mopping). Detailed description: Diluted product is applied by mopping with the appropriate tool (e.g. flat mop or cleaning cloths). After application, the diluted product is drained. |
| Application rate(s) and frequency | Application Rate: Against bacteria and yeasts: Non-medical healthcare areas With 0,048 % PAA (Dilution of the product at 0,96 % i.e. 960 ml/100 l) at Room Temperature in 5 min contact time. Application rate: 20 ml/m2 Use other than in HEALTHCARE With 0,048 % PAA (Dilution of the product at 0,96 % i.e. 960 ml/100 l) in 15 min contact time, efficient use temperature from + 4 °C up to Room Temperature. Application rate: 30 ml/m2 Number and timing of application: / |
| Category(ies) of users | Industrial Professional |
| Pack sizes and packaging material | HDPE with screw and venting caps (weight depends on density of product): Jerry cans (10 to 25 kg), Drums (200 to 250 kg), IBC (1 000 to 1 200 kg), 1 l bottles, bulk delivery. |
4.1.1. Use-specific instructions for use
Items to be disinfected by mopping have to stay sufficiently wet during the required contact time to allow optimal disinfection.
4.1.2. Use-specific risk mitigation measures
Dermal protection:
Use appropriate safety glasses and/or face shield during the mixing and loading.
Respiratory protection:
Use of respiratory protective equipment (RPE) providing a protection factor of 10 is mandatory during mixing and loading.
Use of respiratory protective equipment (RPE) providing a protection factor of 20 is mandatory during the application phase.
When the product is being used in areas accessible to the public, mark treated areas during the treatment period and indicate possible risks for humans and non-target organisms (e.g. primary and secondary poisoning) as well as first measures to be taken in case of poisoning.
Re-entry is only permitted once the air concentrations of peracetic acid and hydrogen peroxide have dropped below the respective reference values (AEC). After the application, the room must be ventilated, preferably by mechanical ventilation. The duration of the ventilation period has to be established by measurement with suitable measurement equipment (specified by the authorization holder).
4.1.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use.
4.1.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use.
4.1.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use.
4.2. Use description
Table 2
Disinfection of surfaces in industrial, public and non-medical healthcare areas – manual treatment (spraying)
| Product type | PT02: Disinfectants and algaecides not intended for direct application to humans or animals |
| Where relevant, an exact description of the authorised use | — |
| Target organism(s) (including development stage) | Scientific name: no data Common name: Bacteria Development stage: no data Scientific name: no data Common name: Yeasts Development stage: no data |
| Field(s) of use | Indoor use In Industrial, public and and non-medical healthcare areas: Disinfection of hard/non-porous surfaces by manual treatment (spraying) with prior cleaning |
| Application method(s) | Method: Manual treatment (spraying) Detailed description: Diluted product is applied by spraying using a small spraying can |
| Application rate(s) and frequency | Application Rate: Against bacteria and yeasts: Non-medical healthcare areas: With 0,048 % PAA (Dilution of the product at 0,96 % i.e. 960 ml/100 l) at Room Temperature in 5 min contact time. Application rate: 20 ml/m2. Use other than in HEALTHCARE With 0,048 % PAA (Dilution of the product at 0,96 % i.e. 960 ml/100 l) in 15 min contact time, efficient use temperature from + 4° C up to Room Temperature. Application rate: 30 ml/m2. Number and timing of application: / |
| Category(ies) of users | Industrial Professional |
| Pack sizes and packaging material | HDPE with screw and venting caps (weight depends on density of product): Jerry cans (10 to 25 kg), Drums (200 to 250 kg), IBC (1 000 to 1 200 kg), 1 l bottles, bulk delivery. |
4.2.1. Use-specific instructions for use
See general directions for use.
4.2.2. Use-specific risk mitigation measures
Dermal protection:
Use appropriate safety glasses and/or face shield during the mixing, loading & application phase.
Respiratory protection:
Use of respiratory protective equipment (RPE) providing a protection factor of 10 is mandatory during mixing and loading.
Use of respiratory protective equipment (RPE) providing a protection factor of 4 is mandatory during the application phase.
When the product is being used in areas accessible to the public, mark treated areas during the treatment period and indicate possible risks for humans and non-target organisms (e.g. primary and secondary poisoning) as well as first measures to be taken in case of poisoning.
Rinse the pump and disconnect it from the installation before maintenance.
The treated surface should not be allowed to dry prior to rinsing.
Re-entry of the general public only when surfaces are dried and after sufficient ventilation.
4.2.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use.
4.2.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use.
4.2.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use.
4.3. Use description
Table 3
Clean in Place (CIP) in the pharmaceutical and cosmetic industry
| Product type | PT02: Disinfectants and algaecides not intended for direct application to humans or animals |
| Where relevant, an exact description of the authorised use | — |
| Target organism(s) (including development stage) | Scientific name: no data Common name: Bacteria Development stage: no data Scientific name: no data Common name: Yeasts Development stage: no data |
| Field(s) of use | Indoor use In pharmaceutical and cosmetic industry: Disinfection of hard/non-porous surfaces by CIP procedures (with circulation) with prior cleaning |
| Application method(s) | Method: By CIP procedure Detailed description: Diluted product does automatically circulate from the CIP holding tanks through closed pipework and installations. After the disinfection procedure, the vessels (pipework and tanks) are drained and rinsed with water under closed system conditions. |
| Application rate(s) and frequency | Application Rate: Against bacteria and yeasts: With 0,032 % PAA (Dilution of the product at 0,64 % i.e. 640 ml/100 l) in 15 min contact time, efficient use temperature from + 4 °C up to Room Temperature. Number and timing of application: / |
| Category(ies) of users | Industrial Professional |
| Pack sizes and packaging material | HDPE with screw and venting caps (weight depends on density of product): Jerry cans (10 to 25 kg), Drums (200 to 250 kg), IBC (1 000 to 1 200 kg), 1 l bottles, bulk delivery. |
4.3.1. Use-specific instructions for use
See general directions for use.
4.3.2. Use-specific risk mitigation measures
Dermal protection:
Use appropriate safety glasses and/or face shield during the mixing & loading phase.
Respiratory protection:
Use of respiratory protective equipment (RPE) providing a protection factor of 4 is mandatory during mixing and loading.
Rinse the pump and disconnect it from the installation before maintenance.
4.3.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use.
4.3.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use.
4.3.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use.
4.4. Use description
Table 4
Surface disinfection in greenhouses via spraying by user with personal enclosure (in absence of plants – for general hygiene purpose only)
| Product type | PT02: Disinfectants and algaecides not intended for direct application to humans or animals |
| Where relevant, an exact description of the authorised use | — |
| Target organism(s) (including development stage) | Scientific name: no data Common name: Bacteria Development stage: no data Scientific name: no data Common name: Yeasts Development stage: no data |
| Field(s) of use | Indoor use In greenhouses: Disinfection of hard/non-porous surfaces by spraying |
| Application method(s) | Method: open system: spray treatment Detailed description: Diluted product is automatically applied in all directions via a spraying device The user is present, seated in a personal enclosure/in a closed cabin (ex. tractor equipped with a spraying/foaming device) |
| Application rate(s) and frequency | Application Rate: Between 20 and 200 ml/m2 Against bacteria and yeasts: With 0,048 % PAA (Dilution of the product at 0,96 % i.e. 960 ml/100 l) in 60 min contact time. Number and timing of application: / |
| Category(ies) of users | Industrial Professional |
| Pack sizes and packaging material | HDPE with screw and venting caps (weight depends on density of product): Jerry cans (10 to 25 kg), Drums (200 to 250 kg), IBC (1 000 to 1 200 kg), 1 l bottles, bulk delivery. |
4.4.1. Use-specific instructions for use
See general directions for use
4.4.2. Use-specific risk mitigation measures
Dermal protection:
Use appropriate safety glasses and/or face shield during the mixing & loading phase.
Respiratory protection:
Use of respiratory protective equipment (RPE) providing a protection factor of 10 is mandatory during mixing and loading and application phase.
When the product is being used in areas accessible to the public, mark treated areas during the treatment period and indicate possible risks for humans and non-target organisms (e.g. primary and secondary poisoning) as well as first measures to be taken in case of poisoning.
The application should only take place with the user in a personal enclosure and no other person is present.
Rinse the pump and disconnect it from the installation before maintenance.
The treated surface should not be allowed to dry prior to rinsing.
Re-entry of the general public only when surfaces are dried and after sufficient ventilation.
4.4.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use.
4.4.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use.
4.4.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use.
4.5. Use description
Table 5
Surface disinfection in greenhouses via spraying by user without personal enclosure (in absence of plants – for general hygiene purpose only)
| Product type | PT02: Disinfectants and algaecides not intended for direct application to humans or animals |
| Where relevant, an exact description of the authorised use | — |
| Target organism(s) (including development stage) | Scientific name: no data Common name: Bacteria Development stage: no data Scientific name: no data Common name: Yeasts Development stage: no data |
| Field(s) of use | Indoor use In greenhouses: Disinfection of hard/non-porous surfaces by spraying |
| Application method(s) | Method: open system: spray treatment Detailed description: Diluted product is automatically applied in all directions via a spraying device. |
| Application rate(s) and frequency | Application Rate: Between 20 and 200 ml/m2 Against bacteria and yeasts: With 0,048 % PAA (Dilution of the product at 0,96 % i.e. 960 ml/100 l) in 60 min contact time. Number and timing of application: / |
| Category(ies) of users | Industrial Professional |
| Pack sizes and packaging material | HDPE with screw and venting caps (weight depends on density of product): Jerry cans (10 to 25 kg), Drums (200 to 250 kg), IBC (1 000 to 1 200 kg), 1 l bottles, bulk delivery. |
4.5.1. Use-specific instructions for use
See general directions for use.
4.5.2. Use-specific risk mitigation measures
Dermal protection:
Use appropriate safety glasses and/or face shield during the mixing, loading & application phase.
Respiratory protection:
Use of respiratory protective equipment (RPE) providing a protection factor of 10 is mandatory during mixing and loading.
Use of respiratory protective equipment (RPE) providing a protection factor of 40 is mandatory during the application phase.
When the product is being used in areas accessible to the public, mark treated areas during the treatment period and indicate possible risks for humans and non-target organisms (e.g. primary and secondary poisoning) as well as first measures to be taken in case of poisoning.
Rinse the pump and disconnect it from the installation before maintenance.
The treated surface should not be allowed to dry prior to rinsing.
Re-entry of the general public only when surfaces are dried and after sufficient ventilation.
4.5.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use.
4.5.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use.
4.5.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use.
4.6. Use description
Table 6
Disinfection of agriculture & horticulture equipment by soaking (in absence of plants – for general hygiene purpose only)
| Product type | PT02: Disinfectants and algaecides not intended for direct application to humans or animals |
| Where relevant, an exact description of the authorised use | — |
| Target organism(s) (including development stage) | Scientific name: no data Common name: Bacteria Development stage: no data Scientific name: no data Common name: Yeasts Development stage: no data |
| Field(s) of use | Indoor use In agriculture/horticulture areas: Disinfection of hard/non-porous surfaces/equipment (small parts such as equipment, spare parts, tools, valves, hoses, …) by immersion in soaking baths with prior cleaning. |
| Application method(s) | Method: open system: immersion Detailed description: The concentrated product is pumped in a soaking bath and diluted to the desired use concentration, before immersion of items to be disinfected |
| Application rate(s) and frequency | Application Rate: Against bacteria and yeasts: With 0,048 % PAA (Dilution of the product at 0,96 % i.e. 960 ml/100 l) in 60 min contact time. Number and timing of application: / |
| Category(ies) of users | Industrial Professional |
| Pack sizes and packaging material | HDPE with screw and venting caps (weight depends on density of product): Jerry cans (10 to 25 kg), Drums (200 to 250 kg), IBC (1 000 to 1 200 kg), 1 l bottles, bulk delivery. |
4.6.1. Use-specific instructions for use
See general directions for use.
4.6.2. Use-specific risk mitigation measures
Dermal protection:
Use appropriate safety glasses and/or face shield during the mixing, loading & application phase.
Respiratory protection:
Use of respiratory protective equipment (RPE) providing a protection factor of 10 is mandatory during mixing and loading.
Use of respiratory protective equipment (RPE) providing a protection factor of 10 is mandatory during the application phase.
Use of respiratory protective equipment (RPE) providing a protection factor of 10 is mandatory during the post-application phase.
When the product is being used in areas accessible to the public, mark treated areas during the treatment period and indicate possible risks for humans and non-target organisms (e.g. primary and secondary poisoning) as well as first measures to be taken in case of poisoning.
Rinse the pump and disconnect it from the installation before maintenance.
4.6.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use.
4.6.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use.
4.6.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use.
4.7. Use description
Table 7
Disinfection of surfaces and agriculture/horticulture equipment by spraying (in absence of plants – for general hygiene purpose only)
| Product type | PT02: Disinfectants and algaecides not intended for direct application to humans or animals |
| Where relevant, an exact description of the authorised use | — |
| Target organism(s) (including development stage) | Scientific name: no data Common name: Bacteria Development stage: no data Scientific name: no data Common name: Yeasts Development stage: no data |
| Field(s) of use | Indoor use In agriculture/horticulture areas: Disinfection of hard/non-porous surfaces/equipment by spraying with prior cleaning |
| Application method(s) | Method: open system: spray treatment Detailed description: The diluted product is manually sprayed on the surfaces/equipment using spraying equipment. Spraying is only applied downwards and in a horizontal direction. |
| Application rate(s) and frequency | Application Rate: Between 20 and 200 ml/m2 Against bacteria and yeasts: With 0,048 % PAA (Dilution of the product at 0,96 % i.e. 960 ml/100 l) in 60 min contact time. Number and timing of application: / |
| Category(ies) of users | Industrial Professional |
| Pack sizes and packaging material | HDPE with screw and venting caps (weight depends on density of product): Jerry cans (10 to 25 kg), Drums (200 to 250 kg), IBC (1 000 to 1 200 kg), 1 l bottles, bulk delivery. |
4.7.1. Use-specific instructions for use
See general directions for use.
4.7.2. Use-specific risk mitigation measures
Dermal protection:
Use appropriate safety glasses and/or face shield during the mixing, loading & application phase.
Respiratory protection:
Use of respiratory protective equipment (RPE) providing a protection factor of 10 is mandatory during mixing and loading.
Use of respiratory protective equipment (RPE) providing a protection factor of 20 is mandatory during the application phase.
When the product is being used in areas accessible to the public, mark treated areas during the treatment period and indicate possible risks for humans and non-target organisms (e.g. primary and secondary poisoning) as well as first measures to be taken in case of poisoning.
Rinse the pump and disconnect it from the installation before maintenance.
The treated surface should not be allowed to dry prior to rinsing.
4.7.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use.
4.7.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use.
4.7.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use.
4.8. Use description
Table 8
Disinfection of surfaces and agriculture/horticulture equipment by automatic spraying (in absence of plants – for general hygiene purpose only)
| Product type | PT02: Disinfectants and algaecides not intended for direct application to humans or animals |
| Where relevant, an exact description of the authorised use | Not relevant |
| Target organism(s) (including development stage) | Scientific name: no data Common name: Bacteria Development stage: no data Scientific name: no data Common name: Yeasts Development stage: no data |
| Field(s) of use | Indoor use In agriculture/horticulture areas: Disinfection of hard/non-porous surfaces/equipment by spraying with prior cleaning |
| Application method(s) | Method: spraying Detailed description: Diluted product is applied by spraying in an automated way Spraying is only applied downwards and in a horizontal direction. |
| Application rate(s) and frequency | Application Rate: Against bacteria and yeasts: With 0,048 % PAA (Dilution of the product at 0,96 % i.e. 960 ml/100 l) in 60 min contact time Number and timing of application: / |
| Category(ies) of users | Industrial Professional |
| Pack sizes and packaging material | HDPE with screw and venting caps (weight depends on density of product): Jerry cans (10 to 25 kg), Drums (200 to 250 kg), IBC (1 000 to 1 200 kg), 1 l bottles, bulk delivery. |
4.8.1. Use-specific instructions for use
See general directions for use.
4.8.2. Use-specific risk mitigation measures
Dermal protection:
Use appropriate safety glasses and/or face shield during the mixing, loading & application phase.
Respiratory protection:
Use of respiratory protective equipment (RPE) providing a protection factor of 10 is mandatory during mixing and loading.
When the product is being used in areas accessible to the public, mark treated areas during the treatment period and indicate possible risks for humans and non-target organisms (e.g. primary and secondary poisoning) as well as first measures to be taken in case of poisoning.
The application is automatic and should only take place when no one is present in the treated area.
Rinse the pump and disconnect it from the installation before maintenance.
The treated surface should not be allowed to dry prior to rinsing.
4.8.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use.
4.8.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use.
4.8.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use.
4.9. Use description
Table 9
Disinfection of surfaces and agriculture/horticulture equipment by automatic spraying (closed room) (in absence of plants – for general hygiene purpose only)
| Product type | PT02: Disinfectants and algaecides not intended for direct application to humans or animals |
| Where relevant, an exact description of the authorised use | — |
| Target organism(s) (including development stage) | Scientific name: no data Common name: Bacteria Development stage: no data Scientific name: no data Common name: Yeasts Development stage: no data |
| Field(s) of use | Indoor use In agriculture/horticulture areas: Disinfection of hard/non-porous surfaces/equipment by spraying with prior cleaning |
| Application method(s) | Method: By spraying. Detailed description: Diluted product is applied by spraying in an automated way without any operator being present |
| Application rate(s) and frequency | Application Rate: Against bacteria and yeasts: With 0,048 % PAA (Dilution of the product at 0,96 % i.e. 960 ml/100 l) in 60 min contact time. Number and timing of application: / |
| Category(ies) of users | Industrial Professional |
| Pack sizes and packaging material | HDPE with screw and venting caps (weight depends on density of product): Jerry cans (10 to 25 kg), Drums (200 to 250 kg), IBC (1 000 to 1 200 kg), 1 l bottles, bulk delivery. |
4.9.1. Use-specific instructions for use
See general directions for use.
4.9.2. Use-specific risk mitigation measures
Dermal protection:
Use appropriate safety glasses and/or face shield during the mixing & loading phase.
Respiratory protection:
Use of respiratory protective equipment (RPE) providing a protection factor of 10 is mandatory during mixing and loading.
When the product is being used in areas accessible to the public, mark treated areas during the treatment period and indicate possible risks for humans and non-target organisms (e.g. primary and secondary poisoning) as well as first measures to be taken in case of poisoning.
The application is automatic and should only take place when no one is present in the treated area.
Rinse the pump and disconnect it from the installation before maintenance.
The treated surface should not be allowed to dry prior to rinsing.
4.9.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use.
4.9.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use.
4.9.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use.
4.10. Use description
Table 10
Disinfection of animal housing – via low-pressure spraying by user with personal enclosure
| Product type | PT03: Veterinary hygiene |
| Where relevant, an exact description of the authorised use | — |
| Target organism(s) (including development stage) | Scientific name: no data Common name: Bacteria Development stage: no data Scientific name: no data Common name: Yeasts Development stage: no data Scientific name: no data Common name: Viruses Development stage: no data |
| Field(s) of use | Indoor use In animal housing: Disinfection of hard/non-porous surfaces by spraying with prior cleaning |
| Application method(s) | Method: spraying Detailed description: Diluted product is automatically applied in all directions by low-pressure manual spraying via a spraying device The user is present, seated in a personal enclosure/in a closed cabin (ex. tractor equipped with a spraying/foaming device) |
| Application rate(s) and frequency | Application Rate: Between 20 and 300 ml/m2 Against bacteria, yeasts and viruses: With 0,064 % PAA (Dilution of the product at 1,28 % i.e. 1 280 ml/100 l) in 60 min contact time. Number and timing of application: / |
| Category(ies) of users | Industrial Professional |
| Pack sizes and packaging material | HDPE with screw and venting caps (weight depends on density of product): Jerry cans (10 to 25 kg), Drums (200 to 250 kg), IBC (1 000 to 1 200 kg), 1 l bottles, bulk delivery. |
4.10.1. Use-specific instructions for use
It has to be assured that animals are not present when treatment takes place.
4.10.2. Use-specific risk mitigation measures
Dermal protection:
Use appropriate safety glasses and/or face shield during the mixing, loading & application phase.
Respiratory protection:
Use of respiratory protective equipment (RPE) providing a protection factor of 10 is mandatory during mixing and loading and application phase.
When the product is being used in areas accessible to the public, mark treated areas during the treatment period and indicate possible risks for humans and non-target organisms (e.g. primary and secondary poisoning) as well as first measures to be taken in case of poisoning.
The application should only take place with the user in a personal enclosure and no other person is present.
Rinse the pump and disconnect it from the installation before maintenance.
The treated surface should not be allowed to dry prior to rinsing.
Only treatment of empty animal housings. Re-entry of animals only after adequate ventilation and when surfaces are dried.
Re-entry of the general public only when surfaces are dried and after sufficient ventilation.
4.10.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use.
4.10.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use.
4.10.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use.
4.11. Use description
Table 11
Disinfection of animal housing via low-pressure manual spraying by user without personal enclosure
| Product type | PT03: Veterinary hygiene |
| Where relevant, an exact description of the authorised use | — |
| Target organism(s) (including development stage) | Scientific name: no data Common name: Bacteria Development stage: no data Scientific name: no data Common name: Yeasts Development stage: no data Scientific name: no data Common name: Viruses Development stage: no data |
| Field(s) of use | Indoor use In animal housing: Disinfection of hard/non-porous surfaces by spraying with prior cleaning |
| Application method(s) | Method: open system: spray treatment Detailed description: Diluted product is automatically applied in all directions by low-pressure automatic spraying via a spraying device |
| Application rate(s) and frequency | Application Rate: Between 20 and 300 ml/m2 Against bacteria, yeasts and viruses: With 0,064 % PAA (Dilution of the product at 1,28 % i.e.1 280 ml/100 l) in 60 min contact time. Number and timing of application: / |
| Category(ies) of users | Industrial Professional |
| Pack sizes and packaging material | HDPE with screw and venting caps (weight depends on density of product): Jerry cans (10 to 25 kg), Drums (200 to 250 kg), IBC (1 000 to 1 200 kg), 1 l bottles, bulk delivery. |
4.11.1. Use-specific instructions for use
It has to be assured that animals are not present when treatment takes place.
4.11.2. Use-specific risk mitigation measures
Dermal protection:
Use appropriate safety glasses and/or face shield during the mixing, loading & application phase.
Respiratory protection:
Use of respiratory protective equipment (RPE) providing a protection factor of 10 is mandatory during mixing and loading.
Use of respiratory protective equipment (RPE) providing a protection factor of 40 is mandatory during the application phase.
When the product is being used in areas accessible to the public, mark treated areas during the treatment period and indicate possible risks for humans and non-target organisms (e.g. primary and secondary poisoning) as well as first measures to be taken in case of poisoning.
Rinse the pump and disconnect it from the installation before maintenance.
The treated surface should not be allowed to dry prior to rinsing.
Only treatment of empty animal housings. Re-entry of animals only after adequate ventilation and when surfaces are dried.
Re-entry of the general public only when surfaces are dried and after sufficient ventilation.
4.11.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use.
4.11.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use.
4.11.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use.
4.12. Use description
Table 12
Disinfection of boots in footbaths in animal housing/husbandries
| Product type | PT03: Veterinary hygiene |
| Where relevant, an exact description of the authorised use | — |
| Target organism(s) (including development stage) | Scientific name: no data Common name: Bacteria Development stage: no data Scientific name: no data Common name: Yeasts Development stage: no data Scientific name: no data Common name: Viruses Development stage: no data |
| Field(s) of use | Indoor use In animal housing/husbandries: Disinfection of boots by dipping (not for walk-through) with prior cleaning. |
| Application method(s) | Method: Dipping Detailed description: Diluted product is put in the footbath No rinse needed |
| Application rate(s) and frequency | Application Rate: Against bacteria, yeasts and viruses: With 0,064 % PAA (Dilution of the product at 1,28 % i.e. 1 280 ml/100 l) in 60 min contact time. Number and timing of application: / |
| Category(ies) of users | Industrial Professional |
| Pack sizes and packaging material | HDPE with screw and venting caps (weight depends on density of product): Jerry cans (10 to 25 kg), Drums (200 to 250 kg), IBC (1 000 to 1 200 kg), 1 l bottles, bulk delivery. |
4.12.1. Use-specific instructions for use
See general directions for use.
4.12.2. Use-specific risk mitigation measures
Dermal protection:
Use appropriate safety glasses and/or face shield during the mixing, loading & application phase.
Respiratory protection:
Use of respiratory protective equipment (RPE) providing a protection factor of 10 is mandatory during mixing and loading.
Use of respiratory protective equipment (RPE) providing a protection factor of 10 is mandatory during the application phase.
Use of respiratory protective equipment (RPE) providing a protection factor of 10 is mandatory during the post-application phase.
When the product is being used in areas accessible to the public, mark treated areas during the treatment period and indicate possible risks for humans and non-target organisms (e.g. primary and secondary poisoning) as well as first measures to be taken in case of poisoning.
Rinse the pump and disconnect it from the installation before maintenance.
Re-entry of the general public only when surfaces are dried and after sufficient ventilation.
4.12.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use.
4.12.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use.
4.12.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use.
4.13. Use description
Table 13
Disinfection of equipment by dipping
| Product type | PT03: Veterinary hygiene |
| Where relevant, an exact description of the authorised use | — |
| Target organism(s) (including development stage) | Scientific name: no data Common name: Bacteria Development stage: no data Scientific name: no data Common name: Yeasts Development stage: no data Scientific name: no data Common name: Viruses Development stage: no data |
| Field(s) of use | Indoor use Disinfection of hard/non-porous surfaces/equipment (small parts such as equipment, spare parts, tools, valves, hoses, …) by immersion in soaking baths with prior cleaning |
| Application method(s) | Method: Soaking. Detailed description: The concentrated product is pumped in a soaking bath and diluted to the desired use concentration, before immersion of items to be disinfected |
| Application rate(s) and frequency | Application Rate: Against bacteria, yeasts and viruses: With 0,064 % PAA (Dilution of the product at 1,28 % i.e. 1 280 ml/100 l) in 60 min contact time. Number and timing of application: / |
| Category(ies) of users | Industrial Professional |
| Pack sizes and packaging material | HDPE with screw and venting caps (weight depends on density of product): Jerry cans (10 to 25 kg), Drums (200 to 250 kg), IBC (1 000 to 1 200 kg), 1 l bottles, bulk delivery. |
4.13.1. Use-specific instructions for use
See general directions for use.
4.13.2. Use-specific risk mitigation measures
Dermal protection:
Use appropriate safety glasses and/or face shield during the mixing, loading & application phase.
Respiratory protection:
Use of respiratory protective equipment (RPE) providing a protection factor of 10 is mandatory during mixing and loading.
Use of respiratory protective equipment (RPE) providing a protection factor of 10 is mandatory during the application phase.
Use of respiratory protective equipment (RPE) providing a protection factor of 10 is mandatory during the post-application phase.
When the product is being used in areas accessible to the public, mark treated areas during the treatment period and indicate possible risks for humans and non-target organisms (e.g. primary and secondary poisoning) as well as first measures to be taken in case of poisoning.
Rinse the pump and disconnect it from the installation before maintenance.
4.13.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use.
4.13.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use.
4.13.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use.
4.14. Use description
Table 14
Disinfection in Aseptic Filling Lines (crown corks, cheese moulds and food crates) – Automated spraying closed systems
| Product type | PT04: Food and feed area |
| Where relevant, an exact description of the authorised use | — |
| Target organism(s) (including development stage) | Scientific name: no data Common name: Bacteria Development stage: no data Scientific name: no data Common name: Yeasts Development stage: no data Scientific name: no data Common name: Bacterial spores Development stage: no data Scientific name: no data Common name: Viruses Development stage: no data Scientific name: no data Common name: Bacteriophages Development stage: no data |
| Field(s) of use | Indoor use In food and beverage industry: Disinfection of hard/non-porous surfaces by spraying with prior cleaning |
| Application method(s) | Method: spraying Detailed description: Diluted product is sprayed on the surfaces in an automated way without any operator being present |
| Application rate(s) and frequency | Application Rate: Against bacteria and yeasts: With 0,048 % PAA (Dilution of the product at 0,96 % i.e. 960 ml/100 l) in 15 min contact time , efficient use temperature from + 4 °C up to Room Temperature. Against bacteria (including bacterial spores) and yeasts: With 0,064 % PAA (Dilution of the product at 1,28 % i.e. 1 280 ml/100 l) in 60 min contact time, efficient use temperature from + 4 °C up to Room Temperature. For additional activity against viruses (including bacteriophages): the product should be used at Room Temperature. Number and timing of application: / |
| Category(ies) of users | Industrial Professional |
| Pack sizes and packaging material | HDPE with screw and venting caps (weight depends on density of product): Jerry cans (10 to 25 kg), Drums (200 to 250 kg), IBC (1 000 to 1 200 kg), 1 l bottles, bulk delivery. |
4.14.1. Use-specific instructions for use
See general directions for use.
4.14.2. Use-specific risk mitigation measures
Dermal protection:
Use appropriate safety glasses and/or face shield during the mixing, loading & application phase.
Respiratory protection:
Use of respiratory protective equipment (RPE) providing a protection factor of 10 is mandatory during mixing and loading.
When the product is being used in areas accessible to the public, mark treated areas during the treatment period and indicate possible risks for humans and non-target organisms (e.g. primary and secondary poisoning) as well as first measures to be taken in case of poisoning.
The application is automatic and should only take place when no one is present in the treated area.
Rinse the pump and disconnect it from the installation before maintenance.
The treated surface should not be allowed to dry prior to rinsing.
4.14.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use.
4.14.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use.
4.14.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use.
4.15. Use description
Table 15
Disinfection of equipment in the food and beverage industry by immersion
| Product type | PT04: Food and feed area |
| Where relevant, an exact description of the authorised use | Not relevant |
| Target organism(s) (including development stage) | Scientific name: no data Common name: Bacteria Development stage: no data Scientific name: no data Common name: Yeasts Development stage: no data Scientific name: no data Common name: Bacterial spores Development stage: no data Scientific name: no data Common name: Viruses Development stage: no data Scientific name: no data Common name: Bacteriophages Development stage: no data |
| Field(s) of use | Indoor use In food and beverage industry: Disinfection of hard/non-porous surfaces (small parts such as equipment, spare parts, tools, valves, hoses, …) by immersion in soaking baths with prior cleaning |
| Application method(s) | Method: Soaking. Detailed description: The concentrated product is pumped in a soaking bath and diluted to the desired use concentration, before immersion of items to be disinfected |
| Application rate(s) and frequency | Application Rate: Against bacteria and yeasts: With 0,048 % PAA (Dilution of the product at 0,96 % i.e. 960 ml/100 l) in 15 min contact time , efficient use temperature from + 4 °C up to Room Temperature. Against bacteria (including bacterial spores) and yeasts: With 0,064 % PAA (Dilution of the product at 1,28 % i.e. 1 280 ml/100 l) in 60 min contact time, efficient use temperature from + 4 °C up to Room Temperature. For additional activity against viruses (including bacteriophages): the product should be used at Room Temperature. Number and timing of application: / |
| Category(ies) of users | Industrial Professional |
| Pack sizes and packaging material | HDPE with screw and venting caps (weight depends on density of product): Jerry cans (10 to 25 kg), Drums (200 to 250 kg), IBC (1 000 to 1 200 kg), 1 l bottles, bulk delivery. |
4.15.1. Use-specific instructions for use
See general directions for use.
4.15.2. Use-specific risk mitigation measures
Dermal protection:
Use appropriate safety glasses and/or face shield during the mixing, loading & application phase.
Respiratory protection:
Use of respiratory protective equipment (RPE) providing a protection factor of 10 is mandatory during mixing and loading.
Use of respiratory protective equipment (RPE) providing a protection factor of 10 is mandatory during the application phase.
Use of respiratory protective equipment (RPE) providing a protection factor of 10 is mandatory during the post-application phase.
When the product is being used in areas accessible to the public, mark treated areas during the treatment period and indicate possible risks for humans and non-target organisms (e.g. primary and secondary poisoning) as well as first measures to be taken in case of poisoning.
Rinse the pump and disconnect it from the installation before maintenance.
Re-entry of the general public only when surfaces are dried and after sufficient ventilation.
4.15.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use.
4.15.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use.
4.15.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use.
4.16. Use description
Table 16
Disinfection of heat and ion exchangers, membrane filters and glass and PET bottles – CIP procedures
| Product type | PT04: Food and feed area |
| Where relevant, an exact description of the authorised use | — |
| Target organism(s) (including development stage) | Scientific name: no data Common name: Bacteria Development stage: no data Scientific name: no data Common name: Yeasts Development stage: no data Scientific name: no data Common name: Bacterial spores Development stage: no data Scientific name: no data Common name: Viruses Development stage: no data Scientific name: no data Common name: Bacteriophages Development stage: no data |
| Field(s) of use | Indoor use In food and beverage industry: Disinfection of hard/non-porous surfaces by CIP procedures (with circulation) with prior cleaning |
| Application method(s) | Method: closed system Detailed description: Diluted product does automatically circulate from the CIP holding tanks through closed pipework and installations. After the disinfection procedure, the vessels (pipework and tanks) are drained and rinsed with water under closed system conditions. |
| Application rate(s) and frequency | Application Rate: Against bacteria and yeasts: With 0,048 % PAA (Dilution of the product at 0,96 % i.e. 960 ml/100 l) in 15 min contact time , efficient use temperature from + 4 °C up to Room Temperature. Against bacteria (including bacterial spores) and yeasts: With 0,064 % PAA (Dilution of the product at 1,28 % i.e. 1 280 ml/100 l) in 60 min contact time, efficient use temperature from + 4 °C up to Room Temperature. For additional activity against viruses (including bacteriophages): the product should be used at Room Temperature. Number and timing of application: / |
| Category(ies) of users | Industrial Professional |
| Pack sizes and packaging material | HDPE with screw and venting caps (weight depends on density of product): Jerry cans (10 to 25 kg), Drums (200 to 250 kg), IBC (1 000 to 1 200 kg), 1 l bottles, bulk delivery. |
4.16.1. Use-specific instructions for use
See general directions for use.
4.16.2. Use-specific risk mitigation measures
Dermal protection:
Use appropriate safety glasses and/or face shield during the mixing & loading phase.
Respiratory protection:
Use of respiratory protective equipment (RPE) providing a protection factor of 4 is mandatory during mixing and loading.
Rinse the pump and disconnect it from the installation before maintenance.
4.16.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use.
4.16.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use.
4.16.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use.
4.17. Use description
Table 17
Disinfection of surfaces and equipment by low pressure spraying – spraying with personal enclosure
| Product type | PT04: Food and feed area |
| Where relevant, an exact description of the authorised use | — |
| Target organism(s) (including development stage) | Scientific name: no data Common name: Bacteria Development stage: no data Scientific name: no data Common name: Yeasts Development stage: no data Scientific name: no data Common name: Bacterial spores Development stage: no data Scientific name: no data Common name: Viruses Development stage: no data Scientific name: no data Common name: bacteriophages Development stage: no data |
| Field(s) of use | Indoor use In food industry: Disinfection of hard/non-porous surfaces/equipment by spraying with prior cleaning |
| Application method(s) | Method: spraying Detailed description: Diluted product is automatically applied in all directions by low-pressure spraying via a spraying device The user is present, seated in a personal enclosure/in a closed cabin (ex. tractor equipped with a spraying/foaming device). |
| Application rate(s) and frequency | Application Rate: Between 20 and 200 ml/m2 Against bacteria and yeasts: With 0,048 % PAA (Dilution of the product at 0,96 % i.e. 960 ml/100 l) in 15 min contact time , efficient use temperature from + 4 °C up to Room Temperature. Against bacteria (including bacterial spores) and yeasts: With 0,064 % PAA (Dilution of the product at 1,28 % i.e. 1 280 ml/100 l) in 60 min contact time, efficient use temperature from + 4 °C up to Room Temperature. For additional activity against viruses (including bacteriophages): the product should be used at Room Temperature. Number and timing of application: / |
| Category(ies) of users | Industrial Professional |
| Pack sizes and packaging material | HDPE with screw and venting caps (weight depends on density of product): Jerry cans (10 to 25 kg), Drums (200 to 250 kg), IBC (1 000 to 1 200 kg), 1 l bottles, bulk delivery. |
4.17.1. Use-specific instructions for use
See general directions for use.
4.17.2. Use-specific risk mitigation measures
Dermal protection:
Use appropriate safety glasses and/or face shield during the mixing, loading & application phase.
Respiratory protection:
Use of respiratory protective equipment (RPE) providing a protection factor of 10 is mandatory during mixing and loading and application phase.
When the product is being used in areas accessible to the public, mark treated areas during the treatment period and indicate possible risks for humans and non-target organisms (e.g. primary and secondary poisoning) as well as first measures to be taken in case of poisoning.
The application should only take place with the user in a personal enclosure and no other person is present.
Rinse the pump and disconnect it from the installation before maintenance.
The treated surface should not be allowed to dry prior to rinsing.
4.17.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use.
4.17.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use.
4.17.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use.
4.18. Use description
Table 18
Disinfection of surfaces and equipment by low pressure spraying – spraying without personal enclosure
| Product type | PT04: Food and feed area |
| Where relevant, an exact description of the authorised use | — |
| Target organism(s) (including development stage) | Scientific name: no data Common name: Bacteria Development stage: no data Scientific name: no data Common name: Yeasts Development stage: no data Scientific name: no data Common name: Bacterial spores Development stage: no data Scientific name: no data Common name: Viruses Development stage: no data Scientific name: no data Common name: Bacteriophages Development stage: no data |
| Field(s) of use | Indoor use In food industry: Disinfection of hard/non-porous surfaces/equipment by spraying with prior cleaning |
| Application method(s) | Method: spraying Detailed description: Diluted product is automatically applied in all directions by low-pressure spraying via a spraying device. |
| Application rate(s) and frequency | Application Rate: Between 20 and 200 ml/m2 Against bacteria and yeasts: With 0,048 % PAA (Dilution of the product at 0,96 % i.e. 960 ml/100 l) in 15 min contact time , efficient use temperature from + 4 °C up to Room Temperature. Against bacteria (including bacterial spores) and yeasts: With 0,064 % PAA (Dilution of the product at 1,28 % i.e. 1 280 ml/100 l) in 60 min contact time, efficient use temperature from + 4 °C up to Room Temperature. For additional activity against viruses (including bacteriophages): the product should be used at Room Temperature. Number and timing of application: / |
| Category(ies) of users | Industrial Professional |
| Pack sizes and packaging material | HDPE with screw and venting caps (weight depends on density of product): Jerry cans (10 to 25 kg), Drums (200 to 250 kg), IBC (1 000 to 1 200 kg), 1 l bottles, bulk delivery. |
4.18.1. Use-specific instructions for use
See general directions for use.
4.18.2. Use-specific risk mitigation measures
Dermal protection:
Use appropriate safety glasses and/or face shield during the mixing, loading & application phase.
Respiratory protection:
Use of respiratory protective equipment (RPE) providing a protection factor of 10 is mandatory during mixing and loading.
Use of respiratory protective equipment (RPE) providing a protection factor of 40 is mandatory during the application phase.
When the product is being used in areas accessible to the public, mark treated areas during the treatment period and indicate possible risks for humans and non-target organisms (e.g. primary and secondary poisoning) as well as first measures to be taken in case of poisoning.
Rinse the pump and disconnect it from the installation before maintenance.
The treated surface should not be allowed to dry prior to rinsing.
4.18.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
See general directions for use.
4.18.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use.
4.18.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use.
4.19. Use description
Table 19
Disinfection of surfaces and equipment by low pressure spraying, manually
Reading this document does not replace reading the official text published in the Official Journal of the European Union. We assume no responsibility for any inaccuracies arising from the conversion of the original to this format.
This text is published under EUR-Lex's own terms of reuse, not a Legalize or public-domain licence.
EUR-Lex
Creative Commons Attribution 4.0 International (CC BY 4.0)
© European Union, https://eur-lex.europa.eu — Source: EUR-Lex (Publications Office of the European Union). Reused under the Creative Commons Attribution 4.0 International (CC BY 4.0) licence. Only EU legislation published in the printed Official Journal of the European Union is deemed authentic; consolidated texts are reproduced here for documentation purposes and have been reformatted to Markdown.