S.I. No. 248/1978 - Marketing of Non-Eec Fertilisers Regulations, 1978

Type Statutory Instrument
Publication 1978-09-01
Last updated 2004-04-28
State In force superseded text
Text As published
articles 14

This is the act as published. Later amendments are not folded into the text below: each one is a separate act in this repository and an entry in this law's history.

2 amending acts · 2004-04-28, S.I. No. 205/2004 - Marketing of Non-Eec Fertilisers Regulations (Amendment) Regulations 2004

Reform history JSON API

I, JAMES GIBBONS, Minister for Agriculture, in exercise of the powers conferred on me by sections 2 , 3 , 4 , 5 , 8 and 11 of the Fertilisers, Feeding Stuffs and Mineral Mixtures Act, 1955 (No. 8 of 1955), after consultation with the Minister for Industry, Commerce and Energy, hereby make the following Regulations (the sanction of the Minister for Finance having been given in relation to the fees specified in Regulation 12):

1 Short title and commencement

1.

1. (1) These Regulations may be cited as the Marketing of Non-EEC Fertilisers Regulations, 1978.

2 Interpretation.

2.

2. (1) In these Regulations—

"the Act" means the Fertilisers, Feeding Stuffs and Mineral Mixtures Act, 1955 (No. 8 of 1955);

"the Commission Directive" means Commission Directive No. 77/535/EEC of 22nd June 1977 ^(a)

"ground limestone" means any liming material which is comprised of crushed or milled natural limestone consisting mainly of either calcium carbonate or calcium carbonate and magnesium carbonate;

"liming material" means any fertiliser intended for use as a corrective of soil acidity;

"the Sampling and Analysis Regulations" means the European Communities (Sampling and Analysis of Fertilisers) Regulations, 1978 ( S.I. No. 12 of 1978 );

"specified fertiliser" has the meaning assigned to it by paragraph (2) of this Regulation;

"statute" has the same meaning as in section 3 of the Interpretation Act, 1937 (No. 38 of 1937).

( a ) it is a type of fertiliser specified in column (1) of Part I of the Schedule to these Regulations,

( b ) it is a product described in column (2) of the said Part I opposite the mention in the said column (1) of its type of fertiliser,

( c ) it complies with the requirements as to the minimum content of nutrients specified in column (3) of the said Part I opposite such mention and any other requirements so specified,

( d ) it complies with the requirements (if any) specified in column (4) or (5) of the said Part I opposite such mention,

( e ) there are given or used the compulsory particulars and identification markings mentioned in paragraph 1 of Part II of the said Schedule,

( f ) in case the measured value of a nutrient contained in the fertiliser deviates from the nutrient's declared value, such deviation is within the relevant tolerances specified in Part III of the said Schedule,

( g ) in case the fertiliser is packaged, the package is closed in such a way or by such a device that, when it is opened, the fastening, fastening seal or the package itself is irreparably damaged,

( h ) the labelling requirements of paragraph 2 of Part II of the said Schedule are complied with in relation to it,

( i ) (i) in case the quantity of fertiliser contained in a container does not exceed 100 kg, all particulars and markings are either marked on the container or appear on a label attached to the container,

( j ) the markings or particulars used, either on the packages or labels relating to it or on accompanying documents so relating, are at least in the Irish language or the English language, and

( k ) there are not so used markings or particulars other than—

3 Application.

3.

3. These Regulations apply to any fertiliser which is a fertiliser to which the European Communities (Marketing of Fertilisers) Regulations, 1978 (No. 13 of 1978), do not apply.

4 Marketing requirements.

4.

4. A fertiliser to which these Regulations apply shall not be sold if it is not a specified fertiliser.

5 Licence for manufacture of ground limestone.

5.

5. A person shall not manufacture for sale any ground limestone save under and in accordance with a licence issued to him by the Minister under these Regulations.

6 Particulars to appear on statement (Liming Materials).

6.

6. (1) With respect to a liming material, the following particulars are hereby prescribed for the purposes of section 2 (1) of the Act:

( a ) the business name and address of the seller of the material to which the statement relates,

( b ) the date on which the material was sold to the purchaser,

( c ) the name under which the material was sold,

( d ) the weight of the material sold,

( e ) the neutralising value of the material sold, as determined in accordance with Part V of the Schedule to these Regulations,

( f ) in case the material is ground limestone,

7 Statement to be given on delivery (Liming Materials).

7.

7. A statement for the purposes of section 2 (1) of the Act and relating to a liming material shall be given at the time of the delivery of the material.

8 Moisture content, neutralising value and fineness (Ground Limestone).

8.

8. (1) The moisture content of a liming material which is ground limestone, as determined in accordance with Part IV of the Schedule to these Regulations, shall not be more than 3 per cent.

9 Sampling.

9.

9. (1) As regards any fertiliser, other than a liming material, which is a fertiliser to which these Regulations apply the following manner of taking samples is hereby prescribed for the purposes of sections 3 and 8 of the the Act:

( a ) in case the fertiliser to be sampled is a solid fertiliser, the manner specified in the Sampling and Analysis Regulations, and

( b ) in case such fertiliser to be sampled is a liquid fertiliser, the manner specified in the said Regulations subject to the following modifications:

Minimum number of containers to be sampled
Where the sampled portion contains one to four containers All containers
Where the sampled portion contains five to sixteen containers Four
Where the sampled portion contains more than sixteen containers The square root of the number of containers in the sampled portion rounded up to the nearest whole number, subject to a maximum of twenty containers.

( a ) (i) approximately equal portions of the material shall be taken (by means of a sampling spear, spade, trowel or other suitable instrument) from different parts of the liming material.

where the quantity to be sampled is 2½ tonnes—

7 portions;

where the quantity to be sampled exceeds 2½ tonnes—

the square root of 20 times the number of tonnes making up the quantity to be sampled subject to a maximum of 40 portions.

( b ) (i) the portion so obtained shall be thoroughly mixed together with a suitable instrument.

( c ) (i) Each of the two containers shall be sealed and labelled in such a manner that they cannot be opened without breaking the seal.

( d ) One of the sealed containers shall be transmitted by the authorised officer concerned to the manufacturer of the liming material from which the sample was taken and the other sealed container shall be transmitted for analysis to the State Chemist as soon as possible.

10 Certificate of result of analysis.

10.

10. As regards any fertiliser to which these Regulations apply, the certificate referred to in section 3 (5) and 8 (4) (c) of the Act shall be in the form set out in—

( a ) in case the fertiliser to which the certificate relates is a liming material, Part VII of the Schedule to these Regulations,

( b ) in case such fertiliser is not a liming material, Part VIII of the said Schedule.

11 Analysis of samples.

11.

11. As regards any fertiliser to which these Regulations apply, the following manner of analysing samples is hereby prescribed for the purposes of sections 3 and 8 of the Act:

( a ) in case the fertiliser to be analysed is a fertiliser which does not contain any of the following, namely, sodium, phosphorus soluble in mineral acids, cobalt, boron or any organic material, the manner specified in Regulation 4 of the Sampling and Analysis Regulations,

( b ) in case such fertiliser is any other fertiliser to which these Regulations apply, the manner which would stand so specified if the Sampling and Analysis Regulations were modified in such one or more of the following ways as is appropriate in the particular circumstances:

Only a representative part of the final sample need be ground and the final sample, or part of the final sample as the case may be, shall be ground so that the whole of it passes through a sieve with a mesh of 1·00mm.",

12 Sampling on request.

12.

12. (1) The period within which an application under section 3 of the Act regarding any fertiliser to which these Regulations apply may be made to the Minister shall be the period of twenty-eight days beginning on the day on which the fertiliser to which the application relates is delivered to the applicant.

13 Limits of error.

13.

13. (1) In relation to fertilisers other than liming materials which are fertilisers to which these Regulations apply the following limits of error are hereby prescribed for the purposes of section 2 of the Act, namely, any deviation which is a deviation referred to in paragraph (2) of this Regulation and which does not exceed whichever of the tolerances specified in Part III of the Schedule to these Regulations is appropriate in the particular case.

( a ) the declared value contained in a statement given as regards any non-EEC fertiliser, for the purposes of section 2 of the Act, of a nutrient contained in the fertiliser, and

( b ) the value of such nutrient when measured on analysis in the manner prescribed by these Regulations.

Particulars Limits of Error
Neutralising Value one-thirtieth (1/30) of the amount stated.
Amount that will pass through a sieve with a mesh of 3·35mm. one-fortieth (1/40) of the amount stated.
Amount that will pass through a sieve with a mesh of 150µm. one-twentieth (1/20) of the amount stated.
Moisture content Nil.

14 Amendment of Fertilisers, Feeding Stuffs and Mineral Mixtures Regulations, 1957.

14.

14. (1) Subject to paragraph (2) of this Regulation, the Fertilisers, Feeding Stuffs and Mineral Mixtures Regulations, 1957 ( S.I. No. 264 of 1957 ), insofar as they relate to fertilisers, are hereby revoked.

SCHEDULE

Part I. Data required or permitted to be used by these Regulations.

A. STRAIGHT FERTILISERS.

1.

NITROGENOUS FERTILISERS.

Ref. No. Type designation Data on method of production and essential ingredients Minimum content of nutrients (percentage by weight); data on the expression of nutrients; other requirements Other data on the type designation Nutrient content to be declared forms and solubilities of the nutrients; other criteria Nutrient content to be declared forms and solubilities of the nutrients; other criteria
(1) (2) (3) (4) (5) (5)
1 Calcium nitrate (nitrate of lime) Chemically obtained product containing calcium nitrate as its essential ingredient and possibly ammonium nitrate 15% N Nitrogen expressed as total nitrogen or as nitric and ammoniacal nitrogen. Maximum content of ammoniacal nitrogen:1·5%N Total nitrogen. Additional optional particulars:Nitric nitrogen Ammoniacal nitrogen Total nitrogen. Additional optional particulars:Nitric nitrogen Ammoniacal nitrogen
2 Calcium magnesium nitrate (nitrate of lime and magnesium) Chemically obtained product containing calcium nitrate and magnesium nitrate as essential ingredients 13% N Nitrogen expressed as nitric nitrogen. Minimum content magnesium in the form of water-soluble salts expressed as magnesium: 3% Mg Nitric nitrogenWater-soluble magnesium salts expressed as magnesium Nitric nitrogenWater-soluble magnesium salts expressed as magnesium
3 Sodium nitrate (nitrate of soda) Chemically obtained product containing sodium nitrate as its essential ingredient 15% N Nitrogen expressed as nitric nitrogen Nitric nitrogen Nitric nitrogen
4 Chile nitrate Product prepared from caliche, containing sodium nitrate as its essential ingredient 15% N Nitrogen expressed as nitric nitrogen Nitric nitrogen Nitric nitrogen
5 Calcium Cyanamide Chemically obtained product containing calcium cyanamide as its essential ingredient, calcium oxide and possibly small quantities of ammonium salts and urea 18% N Nitrogen expressed as total nitrogen, at least 75 % of the nitrogen declared beingbound in the form of cyanamide Total nitrogen Total nitrogen
6 Nitrogenous calcium cyanamide Chemically obtained product containing calcium cyanamide as its essential ingredient, and calcium oxide and possibly small quantities of ammonium salts and urea, plus added nitrate 18% N Nitrogen expressed as total nitrogen, at least 75 % of the non-nitric nitrogen declared being bound in the form of cyanamide. Nitric nitrogen content: minimum: 1 % N maximum: 3 % N Total nitrogen Nitric nitrogen Total nitrogen Nitric nitrogen
7 Sulphate of ammonia Chemically obtained product containing ammonium sulphate as its essential ingredient 20% N Nitrogen expressed as ammoniacal nitrogen Ammoniacal nitrogen Ammoniacal nitrogen
8 Ammonium nitrate or calcium ammonium nitrate Chemically obtained product containing ammonium nitrate as its essential ingredient, which may contain fillers such as ground limestone, calcium sulphate, ground dolomite, magnesium sulphate, kieserite 20% N Nitrogen expressed as nitric nitrogen and ammoniacal nitrogen, each of these two forms of nitrogen accounting for about half the nitrogen present The designation "calcium ammonium nitrate" is exclusively reserved for a fertiliser containing only calcium carbonate (limestone) and/or magnesium carbonate and calcium carbonate (dolomite) in addition to ammonium nitrate. The minimum content of these carbonates must be 20% and their purity level at least 90% Total nitrogen Nitric nitrogenAmmoniacal nitrogen Total nitrogen Nitric nitrogenAmmoniacal nitrogen
9 Ammonium sulphate-nitrate Chemically obtained product containing as essential ingredients ammonium nitrate and ammonium sulphate 25%N Nitrogen expressed as ammoniacal and nitric nitrogen. Minimum nitric nitrogen content: 5 % Total nitrogen Ammoniacal nitrogen Nitric nitrogen Total nitrogen Ammoniacal nitrogen Nitric nitrogen
10 Magnesium sulpho-nitrate Chemically obtained product containing ammonium nitrate, ammonium sulphate and magnesium sulphate as essential ingredients 19% N Nitrogen expressed as ammoniacal and nitric nitrogen. Minimum nitric nitrogen content: 6% N; 3 % Mg Water-soluble magnesium salts expressed as magnesium Total nitrogen, ammoniacal nitrogen. Nitric nitrogen,Water-soluble magnesiumsalts expressed as magnesium Total nitrogen, ammoniacal nitrogen. Nitric nitrogen,Water-soluble magnesiumsalts expressed as magnesium
11 Magnesium ammonium nitrate Chemically obtained product containing ammonium nitrates and magnesium compound salts (dolomite magnesium carbonate and/or magnesium sulphate) as essential ingredients 19% N Nitrogen expressed as ammoniacal nitrogen and nitric nitrogen. Minimum nitric nitrogen content: 6% N; 3% Mg. Magnesiumexpressed as total magnesium Total nitrogen, ammoniacal nitrogen. Nitric nitrogen, total magnesium Total nitrogen, ammoniacal nitrogen. Nitric nitrogen, total magnesium
12 Urea Chemically obtained product containing carbonyl diamide (carbamide) as its essential ingredient 44% N Total ureic nitrogen (including biuret). Maximum biuret content: 1·2% Total nitrogen, expressed as ureic nitrogen Total nitrogen, expressed as ureic nitrogen
13 Urea/ammonium Nitrate Chemically obtained product having urea and ammonium nitrate as its essential ingredients 28% N Nitrogen expressed as ureic, nitric and ammoniacal nitrogen Total nitrogen Ureic nitrogen Total nitrogen Ureic nitrogen

II. PHOSPHATIC FERTILISERS.

Where a particle size criterion is prescribed for the basic constituent materials offertilisers sold in granular form it will be established by an appropriate analytical method.

14 Basic Slag —Thomas phosphates—Thomas slag Product obtained in ironsmelting by treatment of the phosphorus melts and containing calcium silicophosphates as its essential ingredients 5·2% P Phosphorus soluble in mineral acids, at least 75 % of the declared content of phosphorus being soluble in 2% citric acid; or 4·4% P Phosphorus soluble in 2 % citric acid Particle size: at least 75 % able to pass through a sieve with a mesh of 0·160 mm, at least 96% able to pass through a sieve with a mesh of 0·630 mm. Phosphorous soluble in 2% citric acid
15 Normal superphosphate Product obtained by reaction of ground mineral phosphate with sulphuric acid and containing mono- calcium phosphate as anessential ingredient as well as calcium sulphate 7% P Phosphorus soluble in neutral ammonium citrate, at least 93 % of the declaredcontent of P being water- soluble. Test sample: 1 g Phosphorus soluble in neutral ammonium citrate. Water-soluble phosphorus
16 Concentrated super phosphate Product obtained by reaction of ground mineral phosphate with sulphuric acid and phosphoric acid and containing monocalcium phosphate as an essential ingredient as well as calcium sulphate 11 % P Phosphorus soluble in neutral ammonium citrate, at least 93 % of the declared content of P being water- soluble.Test sample: 1 g Phosphorus soluble in neutral ammonium citrate. Water-soluble phosphorus
17 Triple super- phosphate Product obtained by reaction of ground mineral phosphate with phosphoric acid and containing mono- calcium phosphate as itsessential ingredient 16·5 % P Phosphorus soluble in neutral ammonium citrate, at least 93 % of the declared content of P being water- soluble. Test sample: 3 g Phosphorus soluble in neutral ammonium citrate. Water-soluble phosphorus
18 Partially solubilised rock phosphate Product obtained by partial solubilisation of groundrock phosphate withsulphuric acid or phosphoricacid and containing as essential ingredients monocalcium phosphate, tricalcium phosphate and calcium sulphate 8·5% P Phosphorus soluble in mineral acids, at least 40% of the declared content of P being water-soluble Particle size: Total phosphorus (soluble in mineral acids). Phosphorus soluble in water
Product obtained by partial solubilisation of groundrock phosphate withsulphuric acid or phosphoricacid and containing as essential ingredients monocalcium phosphate, tricalcium phosphate and calcium sulphate —at least 90% able to passthrough a sieve with a mesh of 0·160 mm
—at least 98 % able to pass through a sieve with amesh of 0·630 mm.
19 Dicalcium phosphate Product obtained by precipitation of solubilised phosphoric acid frommineral phosphates or bones, and containing dicalcium phosphate dihydrate as its essential ingredient 16·5% P Phosphorus soluble in alkaline ammonium citrate (Petermann). Phosphorus soluble in alkaline ammonium citrate
Product obtained by precipitation of solubilised phosphoric acid frommineral phosphates or bones, and containing dicalcium phosphate dihydrate as its essential ingredient Particle size: —at least 90 % able to pass through a sieve with a mesh of 0·160 mm
—at least 98 % able to pass through a sieve with a mesh of 0·630 mm
20 Calcined phosphate Product obtained by heat treatment of ground rock phosphate with alkaline compounds and silicic acid, and containing alkaline calcium phosphate andcalcium silicate as essential ingredients 11% P Phosphorus soluble inalkaline ammonium citrate(Petermann). Phosphorus soluble in alkaline ammonium citrate
Product obtained by heat treatment of ground rock phosphate with alkaline compounds and silicic acid, and containing alkaline calcium phosphate andcalcium silicate as essential ingredients Particle size: —at least 75 % able to pass through a sieve with a mesh of 0·160 mm
—at least 96 % able to pass through a sieve with a mesh of 0·630 mm
21 Aluminum-calcium phosphate Product obtained in amorphous form by heat treatment and grinding,containing aluminium andcalcium phosphates as essential ingredients 13% P Phosphorus soluble in mineral acids, at least 75 % of the declared content of Pbeing soluble in alkaline ammonium citrate (Joulie). Total phosphorus (soluble in mineral acids). Phosphorus soluble in alkaline ammonium citrate
Product obtained in amorphous form by heat treatment and grinding,containing aluminium andcalcium phosphates as essential ingredients Particle size: —at least 90% able to pass through a sieve with a mesh of 0·160 mm
—at least 98 % able to pass through a sieve with a mesh of 0·630 mm
22 Soft ground rock phosphate Product obtained bygrinding soft mineralphosphates and containing tricalcium phosphate andcalcium carbonate as essential ingredients 11% P Phosphorus soluble in mineral acids, at least 55 % of the declared content of P being soluble in 2% formic acid. Total phosphorus (soluble in mineral acids).Phosphorus soluble in 2% formic acid. Percentage by weight of material able to pass through a sieve with a mesh of 0·063 mm.
Particle size: —at least 90% able to pass through a sieve with a mesh of 0·063 mm Total phosphorus (soluble in mineral acids).Phosphorus soluble in 2% formic acid. Percentage by weight of material able to pass through a sieve with a mesh of 0·063 mm.
—at least 99% able to pass through a sieve with a mesh of 0·125 mm

III. POTASSIC FERTILISERS.

23 Kainit Product obtained from crude potassium salts 8·5% K Water-soluble potassium 3% Mg Magnesium in the form of water-soluble salts,expressed as magnesium Usual tradenames may be added Water-soluble potassium. Water-soluble magnesiumsalts expressed as magnesium
24 Enriched kainit salt Product obtained from crude potassium salts enriched by blending with potassium chloride 15% K Water-soluble potassium Usual trade names may be added Water-soluble potassium. Optional mention of the water-soluble magnesium content where higher than 3% Mg
25 Muriate of potash Product obtained from crude potassium salts and containing potassiumchloride as its essential ingredient 30·5 %K Water-soluble potassium Usual trade names may be added Water-soluble potassium
26 Potassium chloride containing magnesium salt Product obtained from crude potassium salts with added magnesium salts and containing potassium chloride and magnesium salts as essential ingredients 30·5 % K Water-soluble potassium 3% MgMagnesium in the form ofwater-soluble salts, expressed as magnesium Water-soluble potassium. Water-soluble magnesium salts expressed as magnesium
27 Sulphate of potash Product obtainedchemically from potassium salts and containing potassium sulphate as its essential ingredient 39% K Water-soluble potassium.Maximum chlorine content: 3% C1 Water-soluble potassium. Optional mention of the chlorine content where lower than 3% Cl
28 Sulphate of potash containing magnesium salt Product obtained chemically from potassium salts, possibly with addition of magnesium salts, and containing potassium sulphate and magnesium sulphate as essential ingredients 18·5% K Water-soluble potassium. 4·8% MgMagnesium in the form of water-soluble salts, expressed as magnesium. Maximum chlorine content: 3% Cl Usual trade names may be added Water-soluble potassium Water-soluble magnesium salts expressed as magnesium. Optional mention of the chlorine content where lower than 3% Cl

B. COMPOUND FERTILISER TYPES.

1.

NPK FERTILISERS.

Type designation Data on method of production Minimum content of nutrients (percentage by weight) Minimum content of nutrients (percentage by weight) Forms, solubilities and nutrient content to be declared as specified in column 5: particle size. Forms, solubilities and nutrient content to be declared as specified in column 5: particle size. Forms, solubilities and nutrient content to be declared as specified in column 5: particle size. Data for identification of the fertilisers; other requirements. Data for identification of the fertilisers; other requirements. Data for identification of the fertilisers; other requirements.
(1) (2) (3) (3) (4) (4) (4) (5) (5) (5)
Total For each of the nutrients N P K N P K
NPK Fertiliser Product obtained chemically or by blending, without addition of organic nutrients of animal or vegetable origin 20%* (N+P+K) 3% N 2.18%P 4.15% K (1) Total nitrogen (2) Nitric nitrogen (3) Ammoniacal nitrogen (4) Ureic nitrogen (5) Cyanamide nitrogen (1) Water-soluble P (2) P soluble in neutral ammonium citrate (3) P soluble in neutral ammonium citrate and in water (4) P soluble in mineral acids only (5) P soluble in alkaline ammonium citrate (Petermann) (6a) P soluble in mineral acids, of which at least 75% of the declared P content is soluble in 2% citric acid (6b) P soluble in 2% citric acid (7) P soluble in mineral acids, of which at least 75% of the declared P content is soluble in alkaline ammonium citrate (Joulie) Water- soluble K (1) Total nitrogen (2) If any of the forms of nitrogen (2) to (5) amounts to at least 1% by weight, it must be declared 1. An NPK fertiliser free from Thomas slag, calcined phosphate, aluminium-calcium phosphate, partially solubilized rock phosphate and soft ground rock phosphate must be declared in accordance with solubilities (1), (2) or (3): —when the water-soluble P does not amount to ·87%, solubility (2) only shall be declared; —when the water-soluble P is at least ·87% solubilite (3) shall be declared, and the water-soluble P content must be indicated (solubility (1)). The P content soluble in mineral acids only must not exceed ·87%. (1) Water-soluble potassium (2) The indication 'low in chlorine' is linked .o a maximum content of 2% Cl. (3) Chlorine content may be declared.
(8) P soluble in mineral acids, of which at least 55% of the declared P content is soluble in 2% formic acid For this type 1, the test sample for determining solubilities (2) and (3) shall be 1g.
2.(a) An NPK fertiliser containing soft ground rock phosphate or partially solubilised rock phosphate must be free from Thomas slag, calcined phosphate and aluminium- calcium phosphate. It shall be declared in accordance with solubilities (1), (3) and (4).This type of fertiliser must contain:
Particle size of the basic phosphatic ingredients: Particle size of the basic phosphatic ingredients: Particle size of the basic phosphatic ingredients: —at least ·87% P soluble in mineral acids only (solubility (4));
Thomas slag: at least 75% able to pass through a sieve with a mesh of 0·160 mm. Thomas slag: at least 75% able to pass through a sieve with a mesh of 0·160 mm. Thomas slag: at least 75% able to pass through a sieve with a mesh of 0·160 mm. —at least 2·2% P soluble in water and neutral ammonium citrate (solubility (3));
Aluminium-calcium phosphate: at least 90% able to pass through a sieve with a mesh of 0·160 mm. Aluminium-calcium phosphate: at least 90% able to pass through a sieve with a mesh of 0·160 mm. Aluminium-calcium phosphate: at least 90% able to pass through a sieve with a mesh of 0·160 mm. —at least 1·1% water-soluble P (solubility (1)).
Calcined phosphate; at least 75% able to pass through a sieve with a mesh of 0·160 mm. Soft ground rock phosphate: at least 90% able to pass through a sieve with a mesh of 0·063 mm. Partially solubilized rock phosphate; at least 90% able to pass through a sieve with a mesh of 0·160mm Calcined phosphate; at least 75% able to pass through a sieve with a mesh of 0·160 mm. Soft ground rock phosphate: at least 90% able to pass through a sieve with a mesh of 0·063 mm. Partially solubilized rock phosphate; at least 90% able to pass through a sieve with a mesh of 0·160mm Calcined phosphate; at least 75% able to pass through a sieve with a mesh of 0·160 mm. Soft ground rock phosphate: at least 90% able to pass through a sieve with a mesh of 0·063 mm. Partially solubilized rock phosphate; at least 90% able to pass through a sieve with a mesh of 0·160mm This type of fertiliser must be marketed under the designation 'NPK fertiliser containing soft ground rock phosphate' or 'NPK fertiliser containing partially solubilised rock phosphate'. For this type 2(a), the test sample for determining solubility (3) shall be 3 g.
2.(b) An NPK fertiliser containing aluminium-calcium phosphate must be free from Thomas Slag, calcined phosphate, soft ground rock phosphate and partially solubilized rock phosphate.
It shall be declared in accordance with solubilities (1) and (7), the latter applying after deduction of the solubility in water. This type of fertiliser must contain:
—at least ·87% of water-soluble P (solubility (1));
—at least 2·2% of P according to solubility (7). This type of fertiliser must be marketed under the designation 'NPK fertiliser containing aluminium-calcium phosphate.
3. In the case of the NPK fertilisers containing only one of the following types of phosphatic fertiliser:
Thomas slag, calcined phosphate aluminium-calcium phosphate, soft ground rock phosphate, the type designation must be followed by an indication of the phosphate ingredient
The declaration of the solubility of the P must be given in accordance with the following solubilities:
—for fertilisers based on Thomas slag: solubility (6b);
—for fertilisers based on calcined phosphate: solubility (5);
—for fertilisers based on aluminium calcium phosphate: solubility (7);
—for fertilisers based on soft ground rock phosphate: solubility (8).

*20% (N+P+K) to be calculated by multiplying the nutrient contents N, P and K by 1, 2·29 and 1·2 respectively and adding the results of such multiplication.

B. COMPOUND FERTILISER TYPES.

2.

NP FERTILISERS.

Type designation Data on method of production Minimum content of nutrients (percentage by weight) Minimum content of nutrients (percentage by weight) Forms, solubilities and nutrient content to be declared as specified in column 5; particle size. Forms, solubilities and nutrient content to be declared as specified in column 5; particle size. Forms, solubilities and nutrient content to be declared as specified in column 5; particle size. Forms, solubilities and nutrient content to be declared as specified in column 5; particle size. Data for identification of the fertilisers; other requirements. Data for identification of the fertilisers; other requirements. Data for identification of the fertilisers; other requirements.
(1) (2) (3) (3) (4) (4) (4) (4) (5) (5) (5)
Total For each of the nutrients N P P K N P K.
NP Fertiliser Product obtained chemically or by blending without addition of organic nutrients of animal or vegetable origin. 18% (N+P)* 3% N 2·18 % P (1) Total Nitrogen (1) Water-soluble P (1) Water-soluble P (1) Total nitrogen 1. An NP fertiliser free from Thomas slag, calcined phosphate, aluminium-calcium phosphate, partially solubilized rock phosphate and soft ground rock phosphate must be declared in accordance with solubilities (1), (2) or (3):
Product obtained chemically or by blending without addition of organic nutrients of animal or vegetable origin. (2) Nitric nitrogen (2) P soluble in neutral ammonium citrate (2) P soluble in neutral ammonium citrate (2) If any of the forms of nitrogen (2) to (5) amounts to at least 1% by weight it must be declared 1. An NP fertiliser free from Thomas slag, calcined phosphate, aluminium-calcium phosphate, partially solubilized rock phosphate and soft ground rock phosphate must be declared in accordance with solubilities (1), (2) or (3):
Product obtained chemically or by blending without addition of organic nutrients of animal or vegetable origin. (3) Am- moniacal nitrogen (3) P soluble in neutral ammonium citrate and in water. (3) P soluble in neutral ammonium citrate and in water. (2) If any of the forms of nitrogen (2) to (5) amounts to at least 1% by weight it must be declared 1. An NP fertiliser free from Thomas slag, calcined phosphate, aluminium-calcium phosphate, partially solubilized rock phosphate and soft ground rock phosphate must be declared in accordance with solubilities (1), (2) or (3):
(4) Ureic nitrogen (4) P soluble in mineral acids only (4) P soluble in mineral acids only
(5) Cyanamide nitrogen (5) P soluble in alkaline ammonium citrate (Petermann) (5) P soluble in alkaline ammonium citrate (Petermann) —when the water-soluble P does not amount to •87% solubility (2) only shall be declared: —when the water-soluble P is at least ·87%, solubility (3) shall be declared, and the water-soluble P content must be indicated (solubility (1)).
(6a) P soluble in mineral acids of which at least 75% of the declared P content is soluble in 2% citric acid (6a) P soluble in mineral acids of which at least 75% of the declared P content is soluble in 2% citric acid —when the water-soluble P does not amount to •87% solubility (2) only shall be declared: —when the water-soluble P is at least ·87%, solubility (3) shall be declared, and the water-soluble P content must be indicated (solubility (1)).
(6b) P soluble in 2% citric acid (6b) P soluble in 2% citric acid
The P content soluble in mineral acids only must not exceed ·87 %. For this type 1, the test sample for determining solubilities (2) and (3) shall be 1 g.
2(a). An NP fertiliser containing soft ground rock phosphate or partially solubilized rock phosphate must be free from Thomas slag, calcined phosphate and aluminium-calcium phosphate.
It shall be declared in accordance with solubilities (1), (3) and (4).
(7) P soluble in mineral acids of which at least 75% of the declared P content is soluble in alkaline ammonium citrate (Joulie) (7) P soluble in mineral acids of which at least 75% of the declared P content is soluble in alkaline ammonium citrate (Joulie) This type of fertiliser must contain: —at least ·87 % P soluble in mineral acids only (solubility (4)); —at least 2·2% P soluble in water and neutral ammonium citrate (solubility (3)); -at least ·11% water-soluble P (solubility (1)).
(8) P soluble in mineral acids of which at least 55% of the declared P content is soluble in 2 % formic acid (8) P soluble in mineral acids of which at least 55% of the declared P content is soluble in 2 % formic acid This type of fertiliser must be marketed under the designation 'NP fertiliser containing soft ground rock phosphate' or 'NP fertiliser containing partially solubilized rock phosphate!
For this type 2(a), the test sample for determining solubility (3) shall be 3 g.
Particle size of the basic phosphatic ingredients: Particle size of the basic phosphatic ingredients: Particle size of the basic phosphatic ingredients: Particle size of the basic phosphatic ingredients: Particle size of the basic phosphatic ingredients: Particle size of the basic phosphatic ingredients:
Thomas slag: Thomas slag: at least 75% able to pass through a sieve with a mesh of 0·160 mm. at least 75% able to pass through a sieve with a mesh of 0·160 mm. at least 75% able to pass through a sieve with a mesh of 0·160 mm. 2(b) An NP fertiliser containing alummium-calcium phosphate must be free from Thomas slag, calcined phosphate, soft ground rock phosphate and partially solubilized rock phosphate. It shall be declared in accordance with solubilities (1) and (7), the latter applying after deduction of the solubility in water.
Aluminium-calcium phosphate: Aluminium-calcium phosphate: at least 90% able to pass through a sieve with a mesh of 0·160mm. at least 90% able to pass through a sieve with a mesh of 0·160mm. at least 90% able to pass through a sieve with a mesh of 0·160mm. 2(b) An NP fertiliser containing alummium-calcium phosphate must be free from Thomas slag, calcined phosphate, soft ground rock phosphate and partially solubilized rock phosphate. It shall be declared in accordance with solubilities (1) and (7), the latter applying after deduction of the solubility in water.
Calcined phosphate: Calcined phosphate: at least 75% able to pass through a sieve with a mesh of 0·160 mm. at least 75% able to pass through a sieve with a mesh of 0·160 mm. at least 75% able to pass through a sieve with a mesh of 0·160 mm. 2(b) An NP fertiliser containing alummium-calcium phosphate must be free from Thomas slag, calcined phosphate, soft ground rock phosphate and partially solubilized rock phosphate. It shall be declared in accordance with solubilities (1) and (7), the latter applying after deduction of the solubility in water.
Soft ground rock phosphate: Soft ground rock phosphate: at least 90 % able to pass through a sieve with a mesh of 0·063 mm. at least 90 % able to pass through a sieve with a mesh of 0·063 mm. at least 90 % able to pass through a sieve with a mesh of 0·063 mm. 2(b) An NP fertiliser containing alummium-calcium phosphate must be free from Thomas slag, calcined phosphate, soft ground rock phosphate and partially solubilized rock phosphate. It shall be declared in accordance with solubilities (1) and (7), the latter applying after deduction of the solubility in water.
Partially solubilized rock phosphate: Partially solubilized rock phosphate: at least 90 % able to pass through a sieve with a mesh of 0·160 mm. at least 90 % able to pass through a sieve with a mesh of 0·160 mm. at least 90 % able to pass through a sieve with a mesh of 0·160 mm.
This type of fertiliser must contain:
—at least 87%water-soluble P (solubility (1));
—at least 2·2% P according to solubility (7).
This type of fertiliser must be marketed under the designation 'NP fertiliser containing aluminium-calcium phosphate'.
3. In the case of NP fertilisers containing only one of the following types of phosphatic fertiliser: Thomas slag, calcined phosphate, aluminium-calcium phosphate, soft ground rock phosphate, the type designation must be followed by an indication of the phosphate ingredient.
The declaration of the solubility of the P must be given in accordance with the following solubilities:
—for fertilisers based on Thomas slag: solubility (6b);
—for fertilisers based on calcined phosphate: solubility (5);
—for fertilisers based on aluminium-calcium phosphate: solubility (7);
—for fertilisers based on soft ground rock phosphate: solubilty (8).

*18% (N+P) to be calculated by multiplying the nutrient contents N and P by 1 and 2·29 respectively and adding the results of such multiplication.

B. COMPOUND FERTILISER TYPES.

3.

NK FERTILISERS.

Type designation Data on method of production Minimum content of nutrients (percentage by weight) Minimum content of nutrients (percentage by weight) Forms, solubilities and nutrient content to be declared as specified in column 5; particle size. Forms, solubilities and nutrient content to be declared as specified in column 5; particle size. Forms, solubilities and nutrient content to be declared as specified in column 5; particle size. Data for identification of the fertilisers; other requirements Data for identification of the fertilisers; other requirements Data for identification of the fertilisers; other requirements
(1) (2) (3) (3) (4) (4) (4) (5) (5) (5)
Total For each of the N P K N P K
NK Fertiliser Product obtained chemically or by blending, without addition of organic nutrients of animal or vegetable origin 18%* (N+K) 3% N 4·15% K (1) Total nitrogen Water- soluble K (1) Total nitrogen (1) Water-soluble potassium
Product obtained chemically or by blending, without addition of organic nutrients of animal or vegetable origin (2) Nitric nitrogen (2) If any of the forms of nitrogen (2) to (5) amounts to at least 1% by weight it must be declared (2) The indication 'low in chlorine' is linked to a maximum content of 2% CL (3) Chlorine content may be declared
Product obtained chemically or by blending, without addition of organic nutrients of animal or vegetable origin (3) Ammonical nitrogen (2) If any of the forms of nitrogen (2) to (5) amounts to at least 1% by weight it must be declared (2) The indication 'low in chlorine' is linked to a maximum content of 2% CL (3) Chlorine content may be declared
Product obtained chemically or by blending, without addition of organic nutrients of animal or vegetable origin (4) Ureic nitrogen (2) If any of the forms of nitrogen (2) to (5) amounts to at least 1% by weight it must be declared (2) The indication 'low in chlorine' is linked to a maximum content of 2% CL (3) Chlorine content may be declared
(5) Cyanamide nitrogen

*18% (N+K) to be calculated by multiplying the nutrient contents N and K by 1 and 1·2 respectively and adding the results of such multiplication.

B. COMPOUND FERTILISER TYPES.

4.

PK FERTILISERS.

Type designation Type designation Data on method of production Minimum content of nutrients (percentage by weight) Minimum content of nutrients (percentage by weight) Forms, solubilities and nutrient content to be declared as specified in column 5; particle size. Forms, solubilities and nutrient content to be declared as specified in column 5; particle size. Forms, solubilities and nutrient content to be declared as specified in column 5; particle size. Data for identification of the fertilisers; other requirements Data for identification of the fertilisers; other requirements Data for identification of the fertilisers; other requirements Data for identification of the fertilisers; other requirements
(1) (1) (2) (3) (3) (4) (4) (4) (5) (5) (5) (5)
Total For each of the nutrients N P K N P K K
PK Fertiliser PK Fertiliser Product obtained chemically or by blending, without addition of organic nutrients of animal or vegetable origin 18%* (P+K) 2·18% P 4·15% K (1) Water-soluble P (2) P soluble in neutral ammonium citrate Water- soluble K 1. A PK fertiliser free from Thomas slag, calcined phosphate, aluminium-calcium phosphate, partially solubilized rock phosphate and soft ground rock phosphate must be declared in accordance with solubilities (1), (2) or (3): (1) Water-soluble potassium (1) Water-soluble potassium
Product obtained chemically or by blending, without addition of organic nutrients of animal or vegetable origin (3) P soluble in neutral ammonium citrate and in water 1. A PK fertiliser free from Thomas slag, calcined phosphate, aluminium-calcium phosphate, partially solubilized rock phosphate and soft ground rock phosphate must be declared in accordance with solubilities (1), (2) or (3): (2) The indication 'low in chlorine' is linked to a maximum content of 2% Cl. (2) The indication 'low in chlorine' is linked to a maximum content of 2% Cl.
(4) P soluble in mineral acids only
(5) P soluble in alkaline ammonium citrate (Petermann) 1. A PK fertiliser free from Thomas slag, calcined phosphate, aluminium-calcium phosphate, partially solubilized rock phosphate and soft ground rock phosphate must be declared in accordance with solubilities (1), (2) or (3):
(6a) P soluble in mineral acids of which at least 75 % of the declared P content is soluble in 2% citric acid. —when the water-soluble P does not amount to ·87 % solubility (2) only shall be declared;
(6b) P soluble in 2% citric acid —when the water-soluble P is at least ·87 % solubility (3) shall be declared and the water-soluble P content must be indicated (solubility (1)).
The P content soluble in mineral acids only must not exceed ·87 % For this type 1, the test sample for determining solubilities (2) and (3) shall be 1 g.
(7) P soluble in mineral acids of which at least 75 % of the declared P content is soluble in alkaline ammonium citrate. 2(a) A PK fertiliser containing soft ground rock phosphate or partially solubilised rock phosphate must be free from Thomas slag, calcined phosphate and aluminium-calcium phosphate. It shall be declared in accordance with solubilities (1) (3) and (4).
(8) P soluble in mineral acids, of which at least 55% of the declared P content is soluble in 2% formic acid.
This type of fertiliser must contain:
—at least ·87% P soluble in mineral acids only (solubility (4));
—at least 2·2% P soluble in water and neutral ammonium citrate (solubility (3));
—at least 1·1% water-soluble P (solubility (1).
This type of fertiliser must be marketed under the designation 'PK fertiliser containing soft ground rock phosphate' or 'PK fertiliser containing partially solubilized rock phosphate'.
Particle size of the basic phosphatic ingredients: Particle size of the basic phosphatic ingredients: Particle size of the basic phosphatic ingredients: For this type 2(a), the test sample for determining solubility (3) shall be 3 g.
Thomas slag: at least 75 % able to pass through a sieve with a mesh of 0·160 mm at least 75 % able to pass through a sieve with a mesh of 0·160 mm 2(b). A PK fertiliser containing aluminium-calcium phosphate must be free from Thomas slag, calcined phosphate and partially solubilised rock phosphate. It shall be declared in accordance with solubilities (1) and (7), the latter applying after deduction of the solubility in water. This type of fertilisers must contain—at least ·87% water soluble P solubility (1)); —at least 2·2% P according to solubility (7). This type of fertiliser must be marketed under the designation 'PK fertiliser containing aluminium-calcium phosphate'.
Aluminium- calcium phosphate: at least 90% able to pass through a sieve with a mesh of 0·160 mm at least 90% able to pass through a sieve with a mesh of 0·160 mm 2(b). A PK fertiliser containing aluminium-calcium phosphate must be free from Thomas slag, calcined phosphate and partially solubilised rock phosphate. It shall be declared in accordance with solubilities (1) and (7), the latter applying after deduction of the solubility in water. This type of fertilisers must contain—at least ·87% water soluble P solubility (1)); —at least 2·2% P according to solubility (7). This type of fertiliser must be marketed under the designation 'PK fertiliser containing aluminium-calcium phosphate'.
Calcined phospale at least 75% able to pass through a sieve with a mesh of 0·160 mm at least 75% able to pass through a sieve with a mesh of 0·160 mm 2(b). A PK fertiliser containing aluminium-calcium phosphate must be free from Thomas slag, calcined phosphate and partially solubilised rock phosphate. It shall be declared in accordance with solubilities (1) and (7), the latter applying after deduction of the solubility in water. This type of fertilisers must contain—at least ·87% water soluble P solubility (1)); —at least 2·2% P according to solubility (7). This type of fertiliser must be marketed under the designation 'PK fertiliser containing aluminium-calcium phosphate'.
Soft ground rock phosphate: at least 90% able to pass through a sieve with a mesh of 0·063mm at least 90% able to pass through a sieve with a mesh of 0·063mm 2(b). A PK fertiliser containing aluminium-calcium phosphate must be free from Thomas slag, calcined phosphate and partially solubilised rock phosphate. It shall be declared in accordance with solubilities (1) and (7), the latter applying after deduction of the solubility in water. This type of fertilisers must contain—at least ·87% water soluble P solubility (1)); —at least 2·2% P according to solubility (7). This type of fertiliser must be marketed under the designation 'PK fertiliser containing aluminium-calcium phosphate'.
Partially solubilized rock phosphate: at least 90% able to pass through a sieve with a mesh of 0·160 mm. at least 90% able to pass through a sieve with a mesh of 0·160 mm.
3. In the case of PK fertilisers containing only one of the following types of phosphatic fertiliser: Thomas slag, calcined phosphate, aluminium-calcium phosphate, soft ground rock phosphate, the type designation must be followed by an indication of the phosphate ingredient.
The declaration of the solubility of the P must be given in accordance with the following solubilities:
—for fertilisers based on Thomas slag; solubility (6b);
—for fertilisers based on calcined phosphate: solubility (5);
—for fertilisers based on aluminium calcium phosphate: solubility (7);
—for fertilisers based on soft ground rock phosphate: solubility (8).

*18% (P+K) to be calculated by multiplying the nutrient contents P and K by x·229 and 1·2 respectively and adding the results of such multiplication.

C. COMPOUND FERTILISERS CONTAINING ORGANIC MATERIAL

This document does not substitute the official text published in the Irish Statute Book. We accept no responsibility for any inaccuracies arising from the transcription of the original into this format.

This text is published under Irish Statute Book's own terms of reuse, not a Legalize or public-domain licence. Irish Statute Book
CC-BY 4.0 (Oireachtas Open Data PSI Licence)
Contains Irish Public Sector Information licensed under the Oireachtas (Houses of the Oireachtas) Open Data PSI Licence / Creative Commons Attribution 4.0 International, sourced from https://www.irishstatutebook.ie.