Every dipstick associated with a bottom loaded compartment shall be marked with the letters “BLV” before the related tank number and on the graduated face of the dipstick at the other end of the blade.

11A

Any sales indicator reading on a contents gauging system reading in litres may also indicate quantity by means of a supplementary indication ....

16A

Any sales indicator reading on a meter measuring system reading in litres may also indicate quantity by means of a supplementary indication ....

Measuring equipment imported from another member State or an EEA State

55A

(1) In relation to measuring equipment imported into Great Britain from a member State or from an EEA State, subject to paragraph (4) below, an inspector shall not carry out any test in accordance with the foregoing provisions of this Part of these Regulations if, together with the measuring equipment being imported, he is presented with the requisite documentation.

(2) In this Regulation and in Regulation 57(2) below—

(a) “requisite documentation” means—

(i) the test report of an approved body stating that the measuring equipment which is the subject of that report has been tested in accordance with the tests mentioned in this Part of these Regulations and stating which tests have been applied to that measuring equipment; and

(ii) the test results relating to those tests; and

(b) “EEA State” means a State which is a Contracting Party to the EEA Agreement ...; and in this paragraph “the EEA Agreement” means the Agreement on the European Economic Area signed at Oporto on 2nd May 1992 as adjusted by the Protocol signed at Brussels on 17th March 1993.

(3) A body is an “approved body” for the purposes of this regulation if it is a body in a member State or in an EEA State which has responsibility in that State for metrological control of measuring equipment on road tankers or is a laboratory which has been accredited for the purposes of testing measuring equipment on road tankers in a member State or in an EEA State as being a body which conforms with the criteria set out in BS EN ISO/IEC 17025:2000.

(4) Nothing in these Regulations shall prevent an inspector testing in accordance with the foregoing provisions of this Part of these Regulations where he is not satisfied—

(a) as to the authenticity of the test report or the test results presented to him; or

(b) that those results in fact relate to the measuring equipment being imported.

Measuring equipment imported from a member State or an EEA State

Reading this document does not replace reading the official text published on legislation.gov.uk. Contains public sector information licensed under the Open Government Licence v3.0. We assume no responsibility for any inaccuracies arising from the conversion of the original CLML XML to this format.

This text is published under legislation.gov.uk's own terms of reuse, not a Legalize or public-domain licence. legislation.gov.uk
Open Government Licence v3.0 (attribution required)
© Crown and database right. Derived from content available under the Open Government Licence v3.0 from legislation.gov.uk.