LegalizeThe Customs Duties (Spain) Order 1988
SCHEDULE 4 — PARTIAL EXEMPTIONS FROM CUSTOMS DUTIES
| Combined nomenclature code | Description of Goods | Rates of duty | Rates of duty | Rates of duty | Rates of duty | Rates of duty | Rates of duty | Rates of duty | Rates of duty |
|---|---|---|---|---|---|---|---|---|---|
| (1) | (2) | (3) | (3) | (3) | (3) | (3) | (3) | (3) | (3) |
| as from 10.8.88 | as from 1.1.89 | as from 1.1.90 | as from 1.1.91 | as from 1.1.92 | as from 1.1.93 | as from 1.1.94 | as from 1.1.95 | ||
| ex 0302.65.10 and ex 0303.75.10 | Piked dogfish (Squalus acanthias), fresh, chilled or frozen, whole, headless or in pieces. | 3.7 | 3 | 2.2 | 0 | ||||
| ex 0306.13.90 | Shrimps of the species “Royal Red” (Haliporoides sibogae or Hymenopenaeus sibogae) peeled and deep-frozen, intended for the processing industry for the manufacture of products falling within heading No 1605 (¹) | 5.6 | 4.5 | 3.3 | 2.2 | 0 | |||
| ex 0904.20.10 | Sweet red or green peppers, in pieces, with a moisture content not exceeding 9.5% | 6.2 | 5 | 3.7 | 2.5 | 0 | |||
| ex 1507.90.10 | Purified soya-bean oil in glass bottles. Each bottle holds 10 litres of purified soya bean oil containing by weight: a minimum of 8.5% and a maximum of 12% of palmitic acid esters, a minimum of 2.5% and a maximum of 4.7% of stearic acid esters, a minimum of 22.4% and a maximum of 29% of oleic acid esters, a minimum of 46.6% and a maximum of 53.7% of linoleic acid esters, a minimum of 7.4 % and a maximum of 11% of linolenic acid esters, and containing: not more than 5 millimoles of free fatty acid per kilogram of oil, phosphalipids corresponding to a nitrogen content not exceeding 0.04 mg per gram of oil. The soya-bean oil covered by this description is destined for the preparation of emulsions for injections (¹) | 8 with a maximum duty of 125 ECU per 100 kg | 8 with a maximum duty of 125 ECU per 100 kg | 8 with a maximum duty of 125 ECU per 100 kg | 6.6 with a maximum duty of 104.1 ECU per 100 kg | 5.3 with a maximum duty of 83.2 ECU per 100 kg | 3.9 with a maximum duty of 62.3 ECU per 100 kg | 2.6 with a maximum duty of 41.5 ECU per 100 kg | 1.3 with a maximum duty of 20.6 ECU per 100 kg |
| ex 1605.20.00 | Shrimps and prawns of the species Pandalus borealis boiled in water and shelled, whether or not frozen or dried, intended for the industrial processing of products falling within heading No 1605 (¹) | 5.4 | 4.2 | 3.1 | 2.1 | 0 | |||
| ex 1605.30.00 | Lobster flesh, cooked, to be used by the processing industry for the manufacture of butters based on lobster, pastes, pâtés, soups or sauces (¹) (²) | 3.1 | 2.5 | 0 | |||||
| ex 2926.90.90 | Isophthalonitrile | 2.2 | 0 | ||||||
| ex 2933.51.10 | Phenobarbital (INN) and its salts | 2.7 | 0 | ||||||
| ex 3906.90.00 | Polymerization products of acrylic acid with small quantities of a polyunsaturated monomer, for use as a stabilizer in emulsions or dispersions with a pH of more than 13 (a) | 2.2 | 0 | ||||||
| ex 8541.40.10 and ex 8542.20.00 | Digital display of a size not exceeding 25×35 mm, consisting of a printed circuit board on which are mounted, under a plastic cover, up to 22 light-emitting diodes manufactured from gallium-based semiconductor compounds. Each display consists of a single character with or without a plus or minus sign and/or one or two dots | 2.6 | 0 | ||||||
| ex 8542.11.71 | Static, random-access memory of C-MOS technology (C-MOS S-RAM) with a storage capacity of 2 K×8 bits and with a nominal standby power of 0,005 milliwatts at 25°C in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×33 mm with not more than 24 connecting pins and bearing: an identification marking consisting of or including one of the following combinations of figures and letters TC5516APL-2 TC5517CPL-15 TC5516AFL-2 TC5517CPL-20 TC5516APL TC5517CFL-15 TC65516AFL TC5517CFL-20 TC5517BPL-20 TC5517BPL-25 TC5517BFL-20 TC65517BFL-25 or other identification markings relating to C-MOS S-RAMs complying with the abovementioned description | 2.6 | 0 | ||||||
| ex 8542.11.71 | Non-volatile memory in the form of a monolithic integrated circuit, consisting of a C-MOS S-RAM, with a capacity of 16 Kbits and internal power supply, contained in a housing the exterior dimensions of which do not exceed 19×36 mm, with not more than 28 connecting pins and bearing: an identification marking consisting of or including one of the following combinations of figures and letters: DS 1220 Y MK 48 Z 02 (B) or other identification markings relating to non-volatile memories complying with the abovementioned description | 2.6 | 0 | ||||||
| ex 8542.11.71 | Static, random-access memory of C-MOS technology (C-MOS S-RAM) with a storage capacity of 2 K×8 bits and with a nominal standby power of 0,005 milliwatts at 25°C in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×33 mm with not more than 24 connecting pins and bearing: an identification marking consisting of or including one of the following combinations of figures and letters: TC5516APL-2 TC5517CPL-15 TC5516AFL-2 TC5517CPL-20 TC5516APL TC5517CFL-15 TC65516AFL TC5517CFL-20 TC5517BPL-20 TC5517BPL-25 TC5517BFL-20 TC65517BFL-25 or other identification markings relating to C-MOS S-RAMs complying with the abovementioned description | 2.6 | 0 | ||||||
| ex 8542.11.71 | Dynamic, random-access read/write memory of N-MOS (including H-MOS) technology, (N-MOS D-RAMs) with a storage capacity of 64 K×4 bits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×34 mm, with not more than 20 connecting pins arranged in two parallel lines (dual-in-line package) and bearing: an identification marking consisting of or including one of the following combinations of figures and letters: HM 50464 PD 41464 MSM 4464 TMM 41464 MB 81464 TMS 4464 PD 41254 or other identification markings relating to N-MOS D-RAMs complying with the abovementioned description | 3.7 | 2.8 | 2.1 | 0 | ||||
| ex 8542.11.71 | Dynamic random-access memories (D-RAMs), of N-MOS (including H-MOS) technology with a storage capacity of 256 K bits and access times not exceeding 150 ns, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of a which do not exceed 12×22 mm, with not more than 20 connecting pins with zig-zag in-line package and bearing: an identification marking consisting of or including one of the following combinations of figures and letters: HM 50256 ZP MB 81256 P PD 41256 V or other identification markings relating to components complying with the abovementioned description | 3.7 | 2.8 | 2.1 | 0 | ||||
| ex 8542.11.71 | Read-only memory in C-MOS technology (C-MOS ROM) with a storage capacity of 256 K bits and a standby current of not more than 0,03 mA, in the form of a monolithic integrated circuit contained in a housing the exterior dimensions of which do not exceed 17×50 mm, with not more than 54 connecting pins and bearing: an indentification marking consisting of or including one of the following combinations of figures and letters: HN 61256 HN 613256 MB 83256 or other identification markings relating to C-MOS ROMs complying with the abovementioned description | 2.6 | 0 | ||||||
| ex 8542.11.71 | Read-only memory of C-MOS technology (C-MOS ROM) with a storage capacity of one megabit in the form of a monolithic integrated circuit contained in a housing the exterior dimensions of which do not exceed 17×39 mm, with not more than 28 connecting pins and bearing: an identification marking consisting of or including one of the following combinations of figures and letters: HN 62301 P MB 83 1000 MB 831124 TC 53 1000 P or other identification markings relating to C-MOS ROMs complying with the abovementioned description | 2.6 | 0 | ||||||
| ex 8542.11.75 | Single-chip 8-bit microcomputer of N-MOS (including H-MOS) technology, in the form of a monolithic integrated circuit incorporating 16-bit arithmetic/logic unit (ALU), 4 K bits ROM, 2 K bits RAM, contained in a housing the external dimensions of which do not exceed 42×17 mm with not more than 64 connecting pins and bearing: an identification marking consisting of or including the following combination of figures and letters: PD 7811 G or other identification markings relating to microcomputers complying with the abovementioned description | 3.7 | 2.8 | 2.1 | 0 | ||||
| ex 8542.11.75 | 8-bit microprocessor of N-MOS (including H-MOS) technology with 16 bit internal architecture, in the form of a monolithic integrated circuit consisting of a central processing unit (CPU), a timing generator, two independent DMA channels, a programmable interrupt controller, three programmable 16 bit timers, programmable memory and peripheral chip select, a programmable wait state generator and a local bus controller, contained in a housing the dimensions of which do not exceed 30×30 mm with not more than 68 connecting pins or contact areas, and bearing: an identification marking consisting of or including the following combination of figures: 80188 or other identification markings relating to microprocessors complying with the abovementioned description | 2.6 | 0 | ||||||
| ex 8542.11.75 | 16-bit microprocessor of N-MOS technology (including H-MOS) in the form of a monolithic integrated circuit, consisting of a central processing unit (CPU), a memory management and protection unit (MMU) and a real address and virtual address operating mode system (OSO), contained in a housing whose exterior dimensions do not exceed 30×30 mm, with not more than 68 connecting pins or contact areas and bearing: and identification marking consisting of or including the following combination of figures: 80286 or other identification markings relating to microprocessors complying with the abovementioned description | 3.7 | 2.8 | 2.1 | 0 | ||||
| ex 8542.11.75 | Graphics co-processor of C-MOS technology comprising an advanced DRAM controller for graphics memory, shift registers and DMA channel, up to 256 simultaneous colours, multi-tasking support, integral sequential DRAM/access DRAMs, contained in a housing the exterior dimensions of which do not exceed 37×37 mm, with not more than 88 connecting pins or contact areas and bearing: an identification marking consisting of or including the following combination of figures: 82786 or other identification markings relating to graphics co-processors complying with the abovementioned description | 2.6 | 0 | ||||||
| ex 8542.11.91 | Semi-custom logic array (gate array) of C-MOS technology with metal gates, in the form of a monolithic integrated circuit with an operating voltage of 12 volts, with not less than 637 two-input functions, having within the array a digital code produced by an electron beam, contained in a housing whose exterior dimensions do not exceed 29×11 mm, with not more than 22 connecting pins and bearing: an identification marking consisting of or including the following combination of figures and letters: FB 215 or other identification markings relating to gate arrays complying with the abovementioned description | 2.6 | 0 | ||||||
| ex 8542.11.91 | Gate arrays of C-MOS technology in the form of a monolithic integrated circuit containing not less than 100 K transistors and not more than 500,000 transistors, contained in a housing the exterior dimensions of which do not exceed 50×50 mm, with not more than 299 connecting pins and bearing: an identification consisting of or including one of the following combinations of figures and letters: LCA 10026 LCA 10075 LCA 10038 LCA 10100 LCA 10051 LCA 10129 or other identification markings relating to microprocessors complying with the abovementioned description | 2.6 | 0 | ||||||
| ex 8542.11.91 | Floppy disc controller of C-MOS technology, in the form of a monolithic integrated circuit contained in a housing the exterior dimensions of which do not exceed 16×62 mm, with not more than 48 connecting pins and bearing: an identification marking consisting of or including one of the following combinations of letters and figures: FE 2100 G 70360-33 L 1 A 0519 MB 89311 WD 16 C 92 WD 37 C 65 or other identification markings relating to adaptor circuits complying with the abovementioned description | 2.6 | 0 | ||||||
| ex 8542.11.91 | Cathode-ray tube controller (CRTC) of N-MOS (including H-MOS) technology in the form of a monolithic integrated circuit contained in a housing the exterior dimensions of which do not exceed 62×25 mm, with not more than 68 connecting pins and bearing: an identification marking either consisting of or including one of the following combinations of figures and letters: AM 8052 D 8275 H HD 6845 HD 68 A 45 P 8275 H or other identification markings relating to CRTCs complying with the abovementioned description | 2.6 | 0 | ||||||
| ex 8542.11.91 | Programmable advanced video display controller (AVDGs) of N-MOS (including H-MOS) technology in the form of a monolithic integrated circuit, contained in a housing whose external dimensions do not exceed 15×55 mm, with not more than 40 connecting pins and bearing: an identification marking consisting of or including the following combination of figures and letters: SCN 2674 or other identification markings relating to controllers complying with the abovementioned description | 2.6 | 0 | ||||||
| ex 8542.11.91 | Programmable communication interface of N-MOS (including H-MOS) technology (N-MOS PCIs), in the form of amonolithic integrated circuit, containedin a housing the exterior dimensions ofwhich do not exceed 17×39 mm, withnot more than 28 connecting pins andbearing: an identification marking consistingof or including the following combiation of figures and letters: 8251 A or other identification markings relatingto N-MOS PCIs complying with theabovementioned description | 2.6 | 0 | ||||||
| ex 8542.11.91 | Monolithic integrated circuit with at least 16 analogue switching elements, of C-MOS technology, for controlling low frequency signals in the range of 20 Hz to 20,000 Hz, capable of dealing with signals up to 3 V with a distortion of not more than 0.05% over the whole frequency range at a voltage of 1 V, contained in a housing the exterior dimensions of which do not exceed 16×40 mm, with not more than 42 connecting pins and bearing: an identification marking consisting of or including one of the following combinations of figures and letters: TC 9164 N TC 9177 P TC 9184 P or other identification markings relating to monolithic integrated circuits complying with the abovementioned description | 2.6 | 0 | ||||||
| ex 8542.11.99 | Universal synchronous/asynchronous receiver/transmitter (USART) of C-MOS technology, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×39 mm, with not more than 32 connecting pins or contact areas and bearing: an identification marking consisting of or including the following combination of figures and letters: MSM 82 C 51 or other identification markings relating to universal synchronous/asynchronous receiver/transmitters complying with the abovementioned description | 2.6 | 0 | ||||||
| ex 8542.11.99 | Pulse code modulation (PCM) codec of N-MOS (including H-MOS) technology, in the form of a monolithic integrated circuit, consisting of a sample and hold circuit digital-to-analogue converter, comparator, successive approximation register and logic function to interface to a fall duplex PCM link, contained in a housing whose exterior dimensions do not exceed 11×29 mm, with not more than 22 connecting pins and bearing: an identification marking consisting of or including the following combination of figures and letters: 2911 A-1 or other identification markings relating to PCM codecs complying with the abovementioned description | 2.6 | 0 | ||||||
| ex 8542.11.99 | Subscriber line audio-processing circuit (SLAC) with two digital signal processors, an anlogue-digital converter and a digital-analogue converter, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×39 mm, with not more than 28 connecting pins and bearing: an identification marking consisting of or including one of the following combinations of figures and letters: AM 7901 AM 7905 or other identification markings relating to SLACs complying with the abovementioned description | 2.6 | 0 | ||||||
| ex 8542.11.99 | Pulse code modulation (PCM) transmit/receive filter of N-MOS (including H-MOS) technology, in the form of a monolithic integrated circuit, consisting of two filters of a PCM line or trunk termination, contained in a housing whose exterior dimensions do not exceed 10×21 mm, with not more than 16 connecting pins and bearing: an identification marking consisting of or including the following combination of figures and letters: D 2912 A or other identification markings relating to PCM filters complying with the abovementioned description | 2.6 | 0 |
Signed
Tony Durant — Mark Lennox-Boyd — Two of the Lords Commissioners of Her Majesty’s Treasury — 20th July 1988
Explanatory note
(This note is not part of the Order)
This Order implements obligations of the United Kingdom concerning Spain under the Treaty of Accession of Spain and Portugal to the European Communities from 10th August 1988 up to and including 31st December 1995. It provides for the reductions in the customs duties charged on the importation of goods into the United Kingdom from Spain which are to be made under the Act annexed to the Treaty from 10th August 1988 and from the beginning of each subsequent calendar year during the remainder of the transitional period, (see European Communities No. 27 and 28 (1985) Cmnd 9634 and 9635). Article 6 of the Customs Duties (Spain and Portugal) Order 1987 (S.I. 1987/2183) would be effective to implement the reduction in customs duties determined by Council Regulation (EEC) No. 839/88 (OJ No. L87, 31.3.1988, p. 1) from 1st July 1988 to the end of 1988 but as from 10th August 1988 this Order replaces as far as Spain is concerned the Customs Duties (Spain and Portugal) Order, (which is revoked by the Customs Duties (Spain and Portugal) (Revocation) Order 1988 (S.I. 1988/1259) in order to make known the actual rates of duty, which are shown in the Schedules to this Order.
Council Regulation (EEC) No. 839/88 totally suspends from 1st July 1988 certain customs duties applicable to imports from Spain.
Certain duties are charged by reference to a number of ECUs. The present rate of conversion for 1988 is 1 ECU equals £0.693890 (see Commission Notice of 1.10.1987, (OJ No. C262, 1.10.1987, p. 1)).
This Order also charges duties on products covered by the European Economic Community’s common organisation of the market in beef and veal which are listed in Schedule 2 from 10th August 1988 until the end of the beef and veal marketing year which begins in 1992. The rate of duty chargeable is determined by reference to the beef and veal marketing year in force at the date of importation rather than the calendar year. The beef and veal marketing year is determined in accordance with article 4 of Council Regulation EEC No. 805/68, which provides that the marketing year shall begin on the first Monday in April of each year and end on the day preceding that day in the following year except where the Council decides otherwise. Thus the beef and veal marketing year for 1988/9 runs from 4th April 1988, until 2nd April 1989, unless the Council decides otherwise.
Goods in Schedule 3 are subject to a total exemption from customs duty and goods in Schedule 4 are subject to a partial exemption from customs duty instead of any higher rate which would otherwise apply under Schedule 1.
Footnotes
[^f00001]: 1972 c. 68; section 1(2) was amended by the European Communities (Spanish and Portuguese Accession) Act 1985 (c. 75) and section 5(3) by the Customs and Excise Duties (General Reliefs) Act 1979 (c. 3), section 19 and Schedule 2, paragraph 3.
[^f00002]: OJ No. L148, 28.6.1968, OJ/SE (I) p. 187.
[^f00003]: The Act is included in European Communities No. 27 (1985), Cmnd 9634, and the Decision is included in European Communities No. 28 (1985) Cmnd 9635.
[^f00004]: See Council Regulation (EEC) 2658/87 (OJ No. L256, 7.9.1987, p. 1).
[^f00005]: S.I. 1987/1538, amended by S.I. 1988/627.
[^f00006]: OJ No. L379, 30.12.1978 p. 1.
[^f00007]: See Council Regulation (EEC) No. 2779/78, (OJ No. L333, 30.11.1978, p. 5), amended by Council Regulation (EEC) No. 289/84, (OJ No. L33, 4.2.1984, p. 2).
[^f00008]: Control of the use for this special purpose shall be carried out pursuant to the relevant Community provisions.
[^f00009]: Control of the use for this special purpose shall be carried out pursuant to the relevant Community provisions.
Reading this document does not replace reading the official text published on legislation.gov.uk. Contains public sector information licensed under the Open Government Licence v3.0. We assume no responsibility for any inaccuracies arising from the conversion of the original CLML XML to this format.
This text is published under legislation.gov.uk's own terms of reuse, not a Legalize or public-domain licence.
legislation.gov.uk
Open Government Licence v3.0 (attribution required)
© Crown and database right. Derived from content available under the Open Government Licence v3.0 from legislation.gov.uk.