The Road Vehicles (Construction and Use) (Amendment) (No. 2) Regulations 1992
Made: 2nd March 1992
Laid before Parliament: 3rd March 1992
Coming into force
The Secretary of State for Transport, in exercise of the powers conferred by section 41(1), (2) and (5) of the Road Traffic Act 1988[^f00001] as read with section 43 of that Act, after consultation with respresentative organisations in accordance with section 195(2) of that Act, hereby makes the following Regulations:
PART I — GENERAL
Citation and commencement
1
- (1) These Regulations may be cited as the Road Vehicles (Constructionand Use) (Amendment) (No. 2) Regulations 1992.
- (2) These Regulations shall come into force for the purposes of regulation 8 on 1st August 1993 and for all other purposes on 1st August 1992.
Preliminary
2
- (1) The Road Vehicles (Construction and Use) Regulations 1986[^f00002] shall be further amended in accordance with the following provisions of these Regulations.
- (2) The Secretary of State is satisfied that—
- (a) it is requisite that the provisions of regulations 3 to 7 shall apply as from 1st August 1992 and of regulation 8 as from 1st August 1993 (being provisions which vary the requirements as regards the construction of certain classes of vehicles) to vehicles registered under the Vehicles (Excise) Act 1971[^f00003] before the expiration of one year from the making of these Regulations; and
- (b) notwithstanding that the said provisions will then apply to those vehicles, no undue hardship or inconvenience will be caused thereby.
PART II — AMENDMENTS WHICH COME INTO FORCE ON 1ST AUGUST 1992
Amendments to Regulation 36A (speed limiters for coaches)
3
- (1) Regulation 36A shall be amended as follows.
- (2) In paragraph (3)(c), after “be sealed” there shall be inserted “by an authorised sealer”.
- (3) After paragraph (3), there shall be inserted the following paragraph—
(3A) Paragraph (3)(c) shall have effect in relation to— (a) a speed limiter fitted before 1st August 1992 to a vehicle first used before that date, (b) a speed limiter sealed outside the United Kingdom, “by an authorised sealer” were omitted
- (4) In paragraph (5), before the definition of “Part I of the British Standard” there shall be inserted the following definition—
- “authorised sealer” has the meaning given in Schedule 3B to these Regulations.
Amendments to Regulation 36B (speed limiters for goods vehicles)
4
- (1) Regulation 36B shall be amended as follows.
- (2) In paragraph (3)(c), after “be sealed” there shall be inserted “by an authorised sealer”.
- (3) After paragraph (3), there shall be inserted the following paragraph—
(3A) Paragraph (3)(c) shall have effect in relation to— (a) a speed limiter fitted before 1st August 1992 to a vehicle first used before that date, (b) a speed limiter sealed outside the United Kingdom, “by an authorised sealer” were omitted
- (4) In paragraph (7), before the words “Part I of the British Standard” there shall be inserted the words “authorised sealer”.
Speed limiters — authorised sealers
5
- (1) After Regulation 36B, there shall be inserted the following—
(36C) Schedule 3B (authorised sealers) shall have effect.
- (2) After Schedule 3A there shall be inserted the Schedule set out inthe Schedule to these Regulations.
Amendments to Regulation 70A (speed limiter plates for coaches)
6
- (1) Regulation 70A shall be amended as follows.
- (2) In paragraphs (2) and (4) after the word “plate” there shall be inserted “which has been supplied by the authorised sealer who sealed the speedlimiter and”.
- (3) After paragraph (4), there shall be inserted the following paragraph—
(4A) Paragraphs (2) and (4) shall have effect, in relation to a vehicle which is not required to be fitted with a speed limiter which has been sealed by an authorised sealer, as if the words “which has been supplied by the authorised sealer who sealed the speedlimiter and” had been omitted.
Amendment to Regulation 70B (speed limiter plates for goods vehicles)
7
- (1) Regulation 70B shall be amended as follows.
- (2) In paragraph (1), the words “which complies with” to the end shall be omitted.
- (3) In paragraph (2), after the word “plate” there shall be inserted “which has been supplied by the authorised sealer who sealed the speedlimiter and”.
- (4) After paragraph (4), there shall be inserted the following paragraph—
(4A) Paragraph (2) shall have effect, in relation to a vehicle which is not required to be fitted with a speed limiter which has been sealed by an authorised sealer, as if the words “which has been supplied by the authorised sealer who sealed the speedlimiter and” had been omitted.
PART III — AMENDMENTS WHICH COME INTO FORCE ON 1ST AUGUST 1993
Amendment to regulation 36B (speed limiters for goods vehicles)
8
Regulation 36B shall be amended as follows—
- (a) after paragraph (1), there shall be inserted the following paragraph—
(1A) Subject to paragraph (6), this regulation also applies to every motor vehicle which— (a) is a goods vehicle; (b) has a maximum gross weight exceeding 16,000kg; (c) is either— (i) a vehicle that is constructed or adapted to form part of an articulated vehicle, or (ii) a rigid vehicle that is constructed or adapted to draw a trailer and has a maximum gross trailer weight which exceeds 5,000kg; (d) is first used on or after 1st January 1988; and (e) has, or if a speed limiter were not fitted to it would have, a relevant speed exceeding 60mph.
; and
- (b) after paragraph (7), there shall be inserted the following paragraph—
(8) For the purposes of this regulation, a motor vehicle has a maximum gross trailer weight exceeding 5,000kg if— (a) in the case of a vehicle equipped with a Ministry plate in accordance with regulation 70, the difference between its maximum gross weight and the relevant train weight exceeds 5,000kg; (b) in the case of a vehicle not equipped with a Ministry plate, but which is equipped with a plate in accordance with regulation 66, the difference between its maximum gross weight and the weight shown on the plate in respect of item 8 of Part I of Schedule 8 exceeds 5,000kg; and (c) in the case of any other vehicle, the vehicle is designed or adapted to be capable of drawing a trailer with a laden weight exceeding 5,000kg when travelling on a road; - and in sub-paragraph (a) “the relevant train weight” is the train weight shown in column (3) of the plate or, if no such weight is shown, the train weight shown in column (2) of the plate (where the plate is in the form required by Schedule 10) or in column (4) of the plate (where the plate is in the form required by Schedule10A).
THE SCHEDULE
Signed
Signed by Authority of the Secretary of State for Transport
Christopher Chope — Parliamentary Under Secretary of State, — Department of Transport — 2nd March 1992
Explanatory note
(This note is not part of the Regulations)
These Regulations further amend the Road Vehicles (Construction and Use) Regulations 1986.
Regulation 36A of the 1986 Regulations made provision for certain goods vehicles first used on or after 1st August 1992 to be fitted with speed limiters. These Regulations extend that regulation so that it applies to certain goods vehicles first used on or after 1st January 1988 and which would otherwise have a maximum speed exceeding 60 mph.
The vehicles which are affected by the amendment are motor vehicles which have a maximum gross weight exceeding 16 tonnes and—
- (a) are constructed to form part of an articulated vehicle; or
- (b) can lawfully tow a trailer with a laden weight exceeding 5 tonnes.
The Regulations also amend the 1986 Regulations so as to require speed limiters fitted on or after 1st August 1992 to be sealed by authorised sealers. Provision is made for the authorisation of sealers by the Secretary of State.
Footnotes
[^f00001]: 1988 c. 52; section 41 is prospectively amended by paragraph 50 of Schedule 4 to the Road Traffic Act 1991 (c. 40). Paragraph 50 comes into force on 1st April 1992 by virtue of S.I.1992/421.
[^f00002]: S.I. 1986/1078; relevant amending instruments are 1988/271 and 1524, and 1991/1527.
[^f00003]: 1971 c. 10.
[^f00004]: 1983 c. 20.
Reading this document does not replace reading the official text published on legislation.gov.uk. Contains public sector information licensed under the Open Government Licence v3.0. We assume no responsibility for any inaccuracies arising from the conversion of the original CLML XML to this format.
This text is published under legislation.gov.uk's own terms of reuse, not a Legalize or public-domain licence.
legislation.gov.uk
Open Government Licence v3.0 (attribution required)
© Crown and database right. Derived from content available under the Open Government Licence v3.0 from legislation.gov.uk.