The Building (Amendment) Regulations 2011

Type Statutory-Instrument
Publication 2011-06-15
State In force
Department Queen's Printer of Acts of Parliament
PDF Download
articles Not indexed
Reform history JSON API

Made: 15th June 2011

Laid before Parliament: 22nd June 2011

Coming into force: 15th July 2011

The Secretary of State makes the following Regulations in exercise of the powers conferred by section 1(1) and paragraphs 1, 4, 4A, 7, 8 and 10 of Schedule 1 to the Building Act 1984[^f00001], having consulted, in accordance with section 14(3) of that Act, the Building Regulations Advisory Committee and such other bodies as appear to the Secretary of State to be representative of the interests concerned.

Citation, commencement and interpretation

1

Amendments to the 2007 and 2010 Regulations

2

Regulation 9 of the 2007 Regulations 2007 is amended as follows—

3

21. Installation, as a replacement, of a window, rooflight, roof window or door in an existing building other than a dwelling. This paragraph does not apply to glass which is load bearing or structural or which forms part of glazed curtain walling or a revolving door. A person registered by BM Trada Certification Limited or under the Fenestration Self-Assessment Scheme by Fensa Limited in respect of that type of work.

Signed

Signed by authority of the Secretary of State

Andrew Stunell — Parliamentary Under Secretary of State — Department for Communities and Local Government — 15th June 2011

Explanatory note

(This note is not part of the Regulations)

EXPLANATORY NOTE

These Regulations amend the Energy Performance of Buildings (Certificates and Inspections) (England and Wales) Regulations 2007 (“the 2007 Regulations”) and the Building Regulations 2010 (“the 2010 Regulations”).

Regulation 2 corrects a minor error in the amendments made by the Building Regulations 2010 to paragraph (1) of regulation 9 of the 2007 Regulations, and removes provisions in that regulation which are now redundant.

Regulation 3(2)(a) and (b) amend definitions in regulation 2 (interpretation) of the 2010 Regulations. The definition of “energy efficiency requirements” is amended to correct an error made in the 2010 Regulations. The definition of “renovation” is amended to make clear that adding a new layer by way of repair to a flat roof does not constitute renovation for the purposes of the 2010 Regulations.

Regulation 3(3), (4) and (6) correct minor errors in regulation 6(1)(a) (requirements relating to material change of use), regulation 49 (transitional provisions: interpretation), and in Schedule 4 paragraph 1(f).

Regulation 3(5) adds a new paragraph to the list in Schedule 3 of work that is exempt from the requirement to give a building notice or to deposit full plans when carried out by persons specified in that Schedule, and adds to those bodies in paragraphs 7, 11 and 12 which are able to register persons for the purposes of self certification schemes.

A full impact assessment of the effect that this instrument will have on the costs of business and the voluntary sector is published with the Explanatory Memorandum alongside the instrument on www.legislation.gov.uk, and shows a net benefit to business in relation to the amendments made to Schedule 3.

Footnotes

[^f00001]: 1984 c.55

[^f00002]: S.I. 2007/991; regulation 9(1) was amended by S.I 2010/2214, regulation 54(2), Schedule 6, paragraph 2(b).

[^f00003]: S.I. 2010/2214.

Reading this document does not replace reading the official text published on legislation.gov.uk. Contains public sector information licensed under the Open Government Licence v3.0. We assume no responsibility for any inaccuracies arising from the conversion of the original CLML XML to this format.

This text is published under legislation.gov.uk's own terms of reuse, not a Legalize or public-domain licence. legislation.gov.uk
Open Government Licence v3.0 (attribution required)
© Crown and database right. Derived from content available under the Open Government Licence v3.0 from legislation.gov.uk.