Commission Regulation (EC) No 1359/95 of 13 June 1995 amending Annexes I and II to Council Regulation (EEC) No 2658/87 on the tariff and statistical nomenclature and on the Common Customs Tariff, and repealing Regulation (EEC) No 802/80

Type Regulation

Publication 1995-06-26

State In force

Text As published

Department European Commission

Source EUR-Lex

articles 3

This is the act as published. Later amendments are not folded into the text below: each one is a separate act in this repository and an entry in this law's history.

Reform history JSON API

— ‘Tinplate’: for the purposes of subheadings 7210 12 11, ex 7210 70 31, 7212 10 10 and 7212 40 10, flat-rolled products (of a thickness of less than 0,5 mm) coated with a layer of metal containing, by weight, 97 % or more of tin.

— ‘Tool steel’: for the purposes of subheadings 7228 30 20, 7228 40 10, 7228 50 20 and 7228 60 81, alloy steels, other than stainless or high-speed steel, containing, by weight, one of the following compositions, with or without other elements:

— less than 0,6 % of carbon

and

0,7 % or more of silicon and 0,05 % or more of vanadium

4 % or more of tungsten;

— 0,8 % or more of carbon

and

0,05 % or more of vanadium;

— more than 1,2 % of carbon

and

not less than 11 % but not more than 15 % of chromium;

— 0,16 or more but not more than 0,5 % of carbon

and

3,8 or more but not more than 4,3 % of nickel

and

1,1 or more but not more than 1,5 % of chromium

and

0,15 or more but not more than 0,5 % of molybdenum;

— 0,3 or more but not more than 0,5 % of carbon

and

1,4 or more but not more than 2,1 % of chromium

and

0,15 or more but not more than 0,5 % of molybdenum

and

less than 1,2 % of nickel;

— 0,3 % or more of carbon

and

less than 5,2 % of chromium

and

0,65 % or more of molybdenum or 0,4 % or more of tungsten;

— 0,5 or more but not more than 0,6 % of carbon

and

1,25 or more but not more than 1,8 % of nickel

and

0,5 or more but not more than 1,2 % of chromium

and

0,15 or more but not more than 0,5 % of molybdenum.


CN code	Description	autonomous (%)	conventional (%)	Supplementary unit
(1)	(2)	(3)	(4)	(5)
I.PRIMARY MATERIALS; PRODUCTS IN GRANULAR OR POWDER FORM	I.PRIMARY MATERIALS; PRODUCTS IN GRANULAR OR POWDER FORM
7201	Pig iron and spiegeleisen in pigs, blocks or other primary forms
7201 10	– Non-alloy pig iron containing by weight 0,5 % or less of phosphorus (ECSC)
	– – Containing by weight not less than 0,4 % of manganese
7201 10 11	– – – Containing by weight 1 % or less of silicon		2,9	—
7201 10 19	– – – Containing by weight more than 1 % of silicon		2,9	—
7201 10 30	– – Containing by weight not less than 0,1 % but less than 0,4 % of manganese		2,9	—
7201 10 90	– – Containing by weight less than 0,1 % of manganese		2,9	—
7201 20 00	– Non-alloy pig iron containing by weight more than 0,5 % of phosphorus (ECSC)		3,6	—
7201 30	– Alloy pig iron
7201 30 10	– – Containing by weight not less than 0,3 % but not more than 1 % of titanium and not less than 0,5 % but not more than 1 % of vanadium (ECSC)		Free	—
7201 30 90	– – Other (ECSC)		2,9	—
7201 40 00	– Spiegeleisen (ECSC)		2,9	—
7202	Ferro-alloys
	– Ferro-manganese
7202 11	– – Containing by weight more than 2 % of carbon (ECSC)
7202 11 20	– – – With a granulometry not exceeding 5 mm and a manganese content by weight exceeding 65 %		3,7	—
7202 11 80	– – – Other		3,7	—
7202 19 00	– – Other	8	4,8	—
	– Ferro-silicon
7202 21	– – Containing by weight more than 55 % of silicon
7202 21 10	– – – Containing by weight more than 55 % but not more than 80 % of silicon	10	6,1(8)	—
7202 21 90	– – – Containing by weight more than 80 % of silicon	10	6,1(8)	—
7202 29 00	– – Other	10	6,1(8)	—
7202 30 00	– Ferro-silico-manganese	6	5,1(8)	—
	– Ferro-chromium
7202 41	– – Containing by weight more than 4 % of carbon
7202 41 10	– – – Containing by weight more than 4 % but not more than 6 % of carbon	8	7,2	—
	– – – Containing by weight more than 6 % of carbon
7202 41 91	– – – – Containing by weight not more than 60 % of chromium	8	7,2	—
7202 41 99	– – – – Containing by weight more than 60 % of chromium	8	7,2	—
7202 49	– – Other
7202 49 10	– – – Containing by weight not more than 0,05 % of carbon	8	7,8(8)	—
7202 49 50	– – – Containing by weight more than 0,05 % but not more than 0,5 % of carbon	8	7,8(8)	—
7202 49 90	– – – Containing by weight more than 0,5 % but not more than 4 % of carbon	8	7,8	—
7202 50 00	– Ferro-silico-chromium	7	4,5	—
7202 60 00	– Ferro-nickel	7	Free	—
7202 70 00	– Ferro-molybdenum	7	4,5	—
7202 80 00	– Ferro-tungsten and ferro-silico-tungsten	7	3,9	—
	– Other
7202 91 00	– – Ferro-titanium and ferro-silico-titanium	7	4,5	—
7202 92 00	– – Ferro-vanadium	7	4,5	—
7202 93 00	– – Ferro-niobium	7	3,9	—
7202 99	– – Other
	– – – Ferro-phosphorus
7202 99 11	– – – – Containing by weight more than 3 % but less than 15 % of phosphorus (ECSC)		3,2	—
7202 99 19	– – – – Containing by weight 15 % or more of phosphorus	11	4	—
7202 99 30	– – – Ferro-silico-magnesium	7	4,5	—
7202 99 80	– – – Other	7	4,5	—
7203	Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99,94 %, in lumps, pellets or similar forms
7203 10 00	– Ferrous products obtained by direct reduction of iron ore (ECSC)		2(57)	—
7203 90 00	– Other (ECSC)		2,6	—
7204	Ferrous waste and scrap; remelting scrap ingots of iron or steel
7204 10 00	– Waste and scrap of cast iron (ECSC)		Free	—
	– Waste and scrap of alloy steel
7204 21	– – Of stainless steel (ECSC)
7204 21 10	– – – Containing by weight 8 % or more of nickel		Free	—
7204 21 90	– – – Other		Free	—
7204 29 00	– – Other (ECSC)		Free	—
7204 30 00	– Waste and scrap of tinned iron or steel (ECSC)		Free	—
	– Other waste and scrap
7204 41	– – Turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundles (ECSC)
7204 41 10	– – – Turnings, shavings, chips, milling waste, sawdust and filings		Free	—
	– – – Trimmings and stampings
7204 41 91	– – – – In bundles		Free	—
7204 41 99	– – – – Other		Free	—
7204 49	– – Other (ECSC)
7204 49 10	– – – Fragmentized (shredded)		Free	—
	– – – Other
7204 49 30	– – – – In bundles		Free	—
	– – – – Other
7204 49 91	– – – – – Neither sorted nor graded		Free	—
7204 49 99	– – – – – Other		Free	—
7204 50	– Remelting scrap ingots
7204 50 10	– – Of alloy steel (ECSC)		Free	—
7204 50 90	– – Other (ECSC)		2	—
7205	Granules and powders, of pig iron, spiegeleisen, iron or steel
7205 10 00	– Granules	10	2,6	—
	– Powders
7205 21 00	– – Of alloy steel	8	2,6	—
7205 29 00	– – Other	8	2,6	—
II.IRON AND NON-ALLOY STEEL	II.IRON AND NON-ALLOY STEEL
7206	Iron and non-alloy steel in ingots or other primary forms (excluding iron of heading No 7203)
7206 10 00	– Ingots (ECSC)		2,3	—
7206 90 00	– Other (ECSC)		2,3	—
7207	Semi-finished products of iron or non-alloy steel
	– Containing by weight less than 0,25 % of carbon
7207 11	– – Of rectangular (including square) cross-section, the width measuring less than twice the thickness
	– – – Rolled or obtained by continuous casting (ECSC)
7207 11 11	– – – – Of free-cutting steel		2,9	—
	– – – – Other
7207 11 14	– – – – – Of a thickness not exceeding 130 mm		2,9	—
7207 11 16	– – – – – Of a thickness exceeding 130 mm		2,9	—
7207 11 90	– – – Forged	10	3,4	—
7207 12	– – Other, of rectangular (other than square) cross-section
7207 12 10	– – – Rolled or obtained by continuous casting (ECSC)		2,9	—
7207 12 90	– – – Forged	10	3,4	—
7207 19	– – Other
	– – – Of circular or polygonal cross-section
	– – – – Rolled or obtained by continuous casting
7207 19 11	– – – – – Of free-cutting steel (ECSC)		5,4	—
	– – – – – Other (ECSC)
7207 19 14	– – – – – – Obtained by continuous casting		4	—
7207 19 16	– – – – – – Other		4	—
7207 19 19	– – – – Forged	10	4,4	—
	– – – Blanks for angles, shapes and sections
7207 19 31	– – – – Rolled or obtained by continuous casting (ECSC)		4	—
7207 19 39	– – – – Forged	10	4,4	—
7207 19 90	– – – Other	10	2,9	—
7207 20	– Containing by weight 0,25 % or more of carbon
	– – Of rectangular (including square) cross-section, the width measuring less than twice the thickness
	– – – Rolled or obtained by continuous casting (ECSC)
7207 20 11	– – – – Of free-cutting steel		2,9	—
	– – – – Other, containing by weight
7207 20 15	– – – – – 0,25 % or more but less than 0,6 % of carbon		2,9	—
7207 20 17	– – – – – 0,6 % or more of carbon		2,9	—
7207 20 19	– – – Forged	10	3,4	—
	– – Other, of rectangular (other than square) cross-section
7207 20 32	– – – Rolled or obtained by continuous casting (ECSC)		2,9	—
7207 20 39	– – – Forged	10	3,4	—
	– – Of circular or polygonal cross-section
	– – – Rolled or obtained by continuous casting
7207 20 51	– – – – Of free-cutting steel (ECSC)		5,4	—
	– – – – Other (ECSC)
7207 20 55	– – – – – Containing by weight 0,25 % or more but less than 0,6 % of carbon		4	—
7207 20 57	– – – – – Containing by weight 0,6 % or more of carbon		4	—
7207 20 59	– – – Forged	10	4,4	—
	– – Blanks for angles, shapes and sections
7207 20 71	– – – Rolled or obtained by continuous casting (ECSC)		4	—
7207 20 79	– – – Forged	10	4,4	—
7207 20 90	– – Other	10	2,9	—
7208	Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated
	– In coils, not further worked than hot-rolled, of a thickness of less than 3 mm and having a minimum yield point of 275 MPa or of a thickness of 3 mm or more and having a minimum yield point of 355 MPa
7208 11 00	– – Of a thickness exceeding 10 mm (ECSC)		4	—
7208 12	– – Of a thickness of 4,75 mm or more but not exceeding 10 mm
7208 12 10	– – – Intended for re-rolling (ECSC) (7)		3,4	—
	– – – Other (ECSC)
7208 12 91	– – – – With patterns in relief		4	—
	– – – – Other
7208 12 95	– – – – – Pickled		4	—
7208 12 98	– – – – – Other		4	—
7208 13	– – Of a thickness of 3 mm or more but less than 4,75 mm
7208 13 10	– – – Intended for re-rolling (ECSC) (7)		3,4	—
	– – – Other (ECSC)
7208 13 91	– – – – With patterns in relief		4	—
	– – – – Other
7208 13 95	– – – – – Pickled		4	—
7208 13 98	– – – – – Other		4	—
7208 14	– – Of a thickness of less than 3 mm
7208 14 10	– – – Intended for re-rolling (ECSC) (7)		3,4	—
	– – – Other (ECSC)
7208 14 91	– – – – Pickled		4	—
7208 14 99	– – – – Other		4	—
	– Other, in coils, not further worked than hot-rolled
7208 21	– – Of a thickness exceeding 10 mm (ECSC)
7208 21 10	– – – With patterns in relief		4	—
7208 21 90	– – – Other		4	—
7208 22	– – Of a thickness of 4,75 mm or more but not exceeding 10 mm
7208 22 10	– – – Intended for re-rolling (ECSC) (7)		3,4	—
	– – – Other (ECSC)
7208 22 91	– – – – With patterns in relief		4	—
	– – – – Other
7208 22 95	– – – – – Pickled		4	—
7208 22 98	– – – – – Other		4	—
7208 23	– – Of a thickness of 3 mm or more but less than 4,75 mm
7208 23 10	– – – Intended for re-rolling (ECSC) (7)		3,4	—
	– – – Other (ECSC)
7208 23 91	– – – – With patterns in relief		4	—
	– – – – Other
7208 23 95	– – – – – Pickled		4	—
7208 23 98	– – – – – Other		4	—
7208 24	– – Of a thickness of less than 3 mm
7208 24 10	– – – Intended for re-rolling (ECSC) (7)		3,4	—
	– – – Other (ECSC)
7208 24 91	– – – – Pickled		4	—
7208 24 99	– – – – Other		4	—
	– Not in coils, not further worked than hot-rolled, of a thickness of less than 3 mm and having a minimum yield point of 275 MPa or of a thickness of 3 mm or more and having a minimum yield point of 355 MPa
7208 31 00	– – Rolled on four faces or in a closed box pass, of a width not exceeding 1 250 mm and of a thickness of not less than 4 mm, without patterns in relief (ECSC)		4	—
7208 32	– – Other, of a thickness exceeding 10 mm (ECSC)
7208 32 10	– – – With patterns in relief		4,4	—
	– – – Other, of a thickness
7208 32 30	– – – – Exceeding 20 mm		4,4	—
	– – – – Exceeding 15 mm but not exceeding 20 mm, of a width of
7208 32 51	– – – – – 2 050 mm or more		4,4	—
7208 32 59	– – – – – Less than 2 050 mm		4,4	—
	– – – – Exceeding 10 mm but not exceeding 15 mm, of a width of
7208 32 91	– – – – – 2 050 mm or more		4,4	—
7208 32 99	– – – – – Less than 2 050 mm		4,4	—
7208 33	– – Other, of a thickness of 4,75 mm or more but not exceeding 10 mm (ECSC)
7208 33 10	– – – With patterns in relief		4,4	—
	– – – Other, of a width of
7208 33 91	– – – – 2 050 mm or more		4,4	—
7208 33 99	– – – – Less than 2 050 mm		4,4	—
7208 34	– – Other, of a thickness of 3 mm or more but less than 4,75 mm (ECSC)
7208 34 10	– – – With patterns in relief		4,4	—
7208 34 90	– – – Other		4,4	—
7208 35	– – Other, of a thickness of less than 3 mm
7208 35 10	– – – Of a thickness of 2 mm or more (ECSC)		4,4	—
7208 35 90	– – – Of a thickness of less than 2 mm (ECSC)		4	—
	– Other, not in coils, not further worked than hot-rolled
7208 41 00	– – Rolled on four faces or in a closed box pass, of a width not exceeding 1 250 mm and of a thickness of not less than 4 mm, without patterns in relief (ECSC)		4	—
7208 42	– – Other, of a thickness exceeding 10 mm (ECSC)
7208 42 10	– – – With patterns in relief		4,4	—
	– – – Other, of a thickness
7208 42 30	– – – – Exceeding 20 mm		4,4	—
	– – – – Exceeding 15 mm but not exceeding 20 mm, of a width of
7208 42 51	– – – – – 2 050 mm or more		4,4	—
7208 42 59	– – – – – Less than 2 050 mm		4,4	—
	– – – – Exceeding 10 mm but not exceeding 15 mm, of a width of
7208 42 91	– – – – – 2 050 mm or more		4,4	—
7208 42 99	– – – – – Less than 2 050 mm		4,4	—
7208 43	– – Other, of a thickness of 4,75 mm or more but not exceeding 10 mm (ECSC)
7208 43 10	– – – With patterns in relief		4,4	—
	– – – Other, of a width of
7208 43 91	– – – – 2 050 mm or more		4,4	—
7208 43 99	– – – – Less than 2 050 mm		4,4	—
7208 44	– – Other, of a thickness of 3 mm or more but less than 4,75 mm (ECSC)
7208 44 10	– – – With patterns in relief		4,4	—
7208 44 90	– – – Other		4,4	—
7208 45	– – Other, of a thickness of less than 3 mm
7208 45 10	– – – Of a thickness of 2 mm or more (ECSC)		4,4	—
7208 45 90	– – – Of a thickness of less than 2 mm (ECSC)		4	—
7208 90	– Other
7208 90 10	– – Not further worked than surface-treated or simply cut into shapes other than rectangular (including square) (ECSC)		4,4	—
7208 90 90	– – Other	10	4,4	—
7209	Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated
	– In coils, not further worked than cold-rolled (cold-reduced), of a thickness of less than 3 mm and having a minimum yield point of 275 MPa or of a thickness of 3 mm or more and having a minimum yield point of 355 MPa
7209 11 00	– – Of a thickness of 3 mm or more (ECSC)		4,4	—
7209 12	– – Of a thickness exceeding 1 mm but less than 3 mm
7209 12 10	– – – ‘Electrical’(ECSC)		4,4	—
7209 12 90	– – – Other (ECSC)		4	—
7209 13	– – Of a thickness of 0,5 mm or more but not exceeding 1 mm
7209 13 10	– – – ‘Electrical’(ECSC)		4,4	—
7209 13 90	– – – Other (ECSC)		4,8	—
7209 14	– – Of a thickness of less than 0,5 mm
7209 14 10	– – – ‘Electrical’(ECSC)		4,4	—
7209 14 90	– – – Other (ECSC)		4,8	—
	– Other, in coils, not further worked than cold-rolled (cold reduced)
7209 21 00	– – Of a thickness of 3 mm or more (ECSC)		4,4	—
7209 22	– – Of a thickness exceeding 1 mm but less than 3 mm
7209 22 10	– – – ‘Electrical’(ECSC)		4,4	—
7209 22 90	– – – Other (ECSC)		4	—
7209 23	– – Of a thickness of 0,5 mm or more but not exceeding 1 mm
7209 23 10	– – – ‘Electrical’(ECSC)		4,4	—
7209 23 90	– – – Other (ECSC)		4,8	—
7209 24	– – Of a thickness of less than 0,5 mm
7209 24 10	– – – ‘Electrical’(ECSC)		4,4	—
	– – – Other (ECSC)
7209 24 91	– – – – Of a thickness of 0,35 mm or more but less than 0,5 mm		4,8	—
7209 24 99	– – – – Of a thickness of less than 0,35 mm		4,8	—
	– Not in coils, not further worked than cold-rolled (cold-reduced), of a thickness of less than 3 mm and having a minimum yield point of 275 MPa or of a thickness of 3 mm or more and having a minimum yield point of 355 MPa
7209 31 00	– – Of a thickness of 3 mm or more (ECSC)		4,4	—
7209 32	– – Of a thickness exceeding 1 mm but less than 3 mm
7209 32 10	– – – ‘Electrical’(ECSC)		4,4	—
7209 32 90	– – – Other (ECSC)		4	—
7209 33	– – Of a thickness of 0,5 mm or more but not exceeding 1 mm
7209 33 10	– – – ‘Electrical’(ECSC)		4,4	—
7209 33 90	– – – Other (ECSC)		4,8	—
7209 34	– – Of a thickness of less than 0,5 mm
7209 34 10	– – – ‘Electrical’(ECSC)		4,4	—
7209 34 90	– – – Other (ECSC)		4,8	—
	– Other, not in coils, not further worked than cold-rolled (cold-reduced)
7209 41 00	– – Of a thickness of 3 mm or more (ECSC)		4,4	—
7209 42	– – Of a thickness exceeding 1 mm but less than 3 mm
7209 42 10	– – – ‘Electrical’(ECSC)		4,4	—
7209 42 90	– – – Other (ECSC)		4	—
7209 43	– – Of a thickness of 0,5 mm or more but not exceeding 1 mm
7209 43 10	– – – ‘Electrical’(ECSC)		4,4	—
7209 43 90	– – – Other (ECSC)		4,8	—
7209 44	– – Of a thickness of less than 0,5 mm
7209 44 90	– – – ‘Electrical’(ECSC)		4,4	—
7209 44 90	– – – Other (ECSC)		4,8	—
7209 90	– Other
7209 90 10	– – Not further worked than surface-treated or simply cut into shapes other than rectangular (including square) (ECSC)		4,4	—
7209 90 90	– – Other	10	4,4	—
7210	Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated
	– Plated or coated with tin
7210 11	– – Of a thickness of 0,5 mm or more
7210 11 10	– – – Not further worked than surface-treated or simply cut into shapes other than rectangular (including square) (ECSC)		4,4	—
7210 11 90	– – – Other	10	4,4	—
7210 12	– – Of a thickness of less than 0,5 mm
	– – – Not further worked than surface-treated or simply cut into shapes other than rectangular (including square)
7210 12 11	– – – – Tinplate (ECSC)		4,4	—
7210 12 19	– – – – Other (ECSC)		4,4	—
7210 12 90	– – – Other	10	4,4	—
7210 20	– Plated or coated with lead, including terne-plate
7210 20 10	– – Not further worked than surface-treated or simply cut into shapes other than rectangular (including square) (ECSC)		4,4	—
7210 20 90	– – Other	10	4,4	—
	– Electrolytically plated or coated with zinc
7210 31	– – Of steel of a thickness of less than 3 mm and having a minimum yield point of 275 MPa or of a thickness of 3 mm or more and having a minimum yield point of 355 MPa
7210 31 10	– – – Not further worked than surface-treated or simply cut into shapes other than rectangular (including square) (ECSC)		4,8	—
7210 31 90	– – – Other	10	4,4	—
7210 39	– – Other
7210 39 10	– – – Not further worked than surface-treated or simply cut into shapes other than rectangular (including square) (ECSC)		4,8	—
7210 39 90	– – – Other	10	4,4	—
	– Otherwise plated or coated with zinc
7210 41	– – Corrugated
7210 41 10	– – – Not further worked than surface-treated or simply cut into shapes other than rectangular (including square) (ECSC)		4,8	—
7210 41 90	– – – Other	10	4,4	—
7210 49	– – Other
7210 49 10	– – – Not further worked than surface-treated or simply cut into shapes other than rectangular (including square) (ECSC)		4,8	—
7210 49 90	– – – Other	10	4,4	—
7210 50	– Plated or coated with chromium oxides or with chromium and chromium oxides
7210 50 10	– – Not further worked than surface-treated or simply cut into shapes other than rectangular (including square) (ECSC)		4,4	—
7210 50 90	– – Other	10	4,4	—
7210 60	– Plated or coated with aluminium
	– – Not further worked than surface-treated or simply cut into shapes other than rectangular (including square) (ECSC)
7210 60 11	– – – Plated or coated with aluminium-zinc alloys		4,4	—
7210 60 19	– – – Other		4,4	—
7210 60 90	– – Other	10	4,4	—
7210 70	– Painted, varnished or coated with plastics
	– – Not further worked than surface-treated or simply cut into shapes other than rectangular (including square)
7210 70 31	– – – Tinplate and products, plated or coated with chromium oxides or with chromium and chromium oxides, varnished (ECSC)		3,9	—
7210 70 39	– – – Other (ECSC)		4,4	—
7210 70 90	– – Other	10	4,4	—
7210 90	– Other
7210 90 10	– – Silvered, gilded, platinium-plated or enamelled	10	4,4	—
	– – Other
	– – – Not further worked than surface-treated, including cladding, or simply cut into shapes other than rectangular (including square) (ECSC)
7210 90 31	– – – – Clad		4,4	—
7210 90 33	– – – – Tinned and printed		4,4	—
7210 90 35	– – – – Plated or coated with chromium or nickel		4,4	—
7210 90 39	– – – – Other		4,4	—
7210 90 90	– – – Other	10	4,4	—
7211	Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated
	– Not further worked than hot-rolled, of a thickness of less than 3 mm and having a minimum yield point of 275 MPa or of a thickness of 3 mm or more and having a minimum yield point of 355 MPa
7211 11 00	– – Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief (ECSC)		4	—
7211 12	– – Other, of a thickness of 4,75 mm or more
7211 12 10	– – – Of a width exceeding 500 mm (ECSC)		4	—
7211 12 90	– – – Of a width not exceeding 500 mm (ECSC)		4,8	—
7211 19	– – Other
7211 19 10	– – – Of a width exceeding 500 mm (ECSC)		4	—
	– – – Of a width not exceeding 500 mm (ECSC)
7211 19 91	– – – – Of a thickness of 3 mm or more but less than 4,75 mm		4,8	—
7211 19 99	– – – – Of a thickness of less than 3 mm		4,8	—
	– Other, not further worked than hot-rolled
7211 21 00	– – Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief (ECSC)		4	—
7211 22	– – Other, of a thickness of 4,75 mm or more
7211 22 10	– – – Of a width exceeding 500 mm (ECSC)		4	—
7211 22 90	– – – Of a width not exceeding 500 mm (ECSC)		4,8	—
7211 29	– – Other
7211 29 10	– – – Of a width exceeding 500 mm (ECSC)		4	—
	– – – Of a width not exceeding 500 mm (ECSC)
7211 29 91	– – – – Of a thickness of 3 mm or more but less than 4,75 mm		4,8	—
7211 29 99	– – – – Of a thickness of less than 3 mm		4,8	—
7211 30	– Not further worked than cold-rolled (cold-reduced), of a thickness of less than 3 mm and having a minimum yield point of 275 MPa or of a thickness of 3 mm or more and having a minimum yield point of 355 MPa
7211 30 10	– – Of a width exceeding 500 mm (ECSC)		4,4	—
	– – Of a width not exceeding 500 mm
	– – – Containing by weight less than 0,25 % of carbon
7211 30 31	– – – – ‘Electrical’	10	4,8	—
7211 30 39	– – – – Other	10	4,8	—
7211 30 50	– – – Containing by weight 0,25 % or more but less than 0,6 % of carbon	10	4,8	—
7211 30 90	– – – Containing by weight 0,6 % or more of carbon	10	4,8	—
	– Other, not further worked than cold-rolled (cold-reduced)
7211 41	– – Containing by weight less than 0,25 % of carbon
7211 41 10	– – – Of a width exceeding 500 mm (ECSC)		4,4	—
	– – – Of a width not exceeding 500 mm
7211 41 91	– – – – In coils intended for the manufacture of tinplate (ECSC)		4,8	—
	– – – – Other
7211 41 95	– – – – – ‘Electrical’	10	4,8	—
7211 41 99	– – – – – Other	10	4,8	—
7211 49	– – Other
7211 49 10	– – – Of a width exceeding 500 mm (ECSC)		4,4	—
	– – – Of a width not exceeding 500 mm
7211 49 91	– – – – Containing by weight 0,25 % or more but less than 0,6 % of carbon	10	4,8	—
7211 49 99	– – – – Containing by weight 0,6 % or more of carbon	10	4,8	—
7211 90	– Other
	– – Of a width exceeding 500 mm
7211 90 11	– – – Not further worked than surface-treated (ECSC)		4,4	—
7211 90 19	– – – Other	10	4,4	—
7211 90 90	– – Of a width not exceeding 500 mm	10	4,8	—
7212	Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, clad, plated or coated
7212 10	– Plated or coated with tin
7212 10 10	– – Tinplate, not further worked than surface-treated (ECSC)		4,4	—
	– – Other
	– – – – Of a width exceeding 500 mm
7212 10 91	– – – – Not further worked than surface-treated (ECSC)		4,4	—
7212 10 93	– – – – Other	10	4,4	—
7212 10 99	– – – Of a width not exceeding 500 mm	10	4,8	—
	– Electrolytically plated or coated with zinc
7212 21	– – Of steel of a thickness of less than 3 mm and having a minimum yield point of 275 MPa or of a thickness of 3 mm or more and having a minimum yield point of 355 MPa
	– – – Of a width exceeding 500 mm
7212 21 11	– – – – Not further worked than surface-treated (ECSC)		4,8	—
7212 21 19	– – – – Other	10	4,4	—
7212 21 90	– – – Of a width not exceeding 500 mm	10	4,8	—
7212 29	– – Other
	– – – Of a width exceeding 500 mm
7212 29 11	– – – – Not further worked than surface-treated (ECSC)		4,8	—
7212 29 19	– – – – Other	10	4,4	—
7212 29 90	– – – Of a width not exceeding 500 mm	10	4,8	—
7212 30	– Otherwise plated or coated with zinc
	– – Of a width exceeding 500 mm
7212 30 11	– – – Not further worked than surface-treated (ECSC)		4,8	—
7212 30 19	– – – Other	10	4,4	—
7212 30 90	– – Of a width not exceeding 500 mm	10	4,8	—
7212 40	– Painted, varnished or coated with plastics
7212 40 10	– – Tinplate, not further worked than varnished (ECSC)		4,4	—
	– – Other
	– – – Of a width exceeding 500 mm
7212 40 91	– – – – Not further worked than surface-treated (ECSC)		3,9	—
7212 40 93	– – – – Other	10	3,9	—
	– – – Of a width not exceeding 500 mm
7212 40 95	– – – – Plated or coated with chromium oxides or with chromium and chromium oxides, varnished	10	4,8	—
7212 40 98	– – – – Other	10	4,8	—
7212 50	– Otherwise plated or coated
	– – Of a width exceeding 500 mm
7212 50 10	– – – – Silvered, gilded, platinum-plated or enamelled	10	4,4	—
	– – – Lead-coated
7212 50 31	– – – – Not further worked than surface-treated (ECSC)		4,8	—
7212 50 39	– – – – Other	10	4,4	—
	– – – Other
7212 50 51	– – – – Not further worked than surface-treated (ECSC)		4,4	—
7212 50 59	– – – – Other	10	4,4	—
	– – Of a width not exceeding 500 mm
7212 50 71	– – – Tinned and printed	10	4,8	—
7212 50 73	– – – Plated or coated with chromium oxides or with chromium and chromium oxides	10	4,8	—
7212 50 75	– – – Plated or coated with copper	10	4,8	—
7212 50 85	– – – Lead-coated	10	4,8	—
7212 50 91	– – – Plated or coated with chromium or nickel	10	4,8	—
	– – – Plated or coated with aluminium
7212 50 93	– – – – Plated or coated with aluminium-zinc alloys	10	4,8	—
7212 50 97	– – – – Other	10	4,8	—
7212 50 98	– – – Other	10	4,8	—
7212 60	– Clad
	– – Of a width exceeding 500 mm
7212 60 11	– – – Not further worked than surface-treated (ECSC)		4,4	—
7212 60 19	– – – Other	10	4,4	—
	– – Of a width not exceeding 500 mm
	– – – Not further worked than surface-treated
7212 60 91	– – – – Hot-rolled, not further worked than clad (ECSC)		4,4	—
7212 60 93	– – – – Other	10	4,8	—
7212 60 99	– – – Other	10	4,8	—
7213	Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel
7213 10 00	– Containing indentations, ribs, grooves or other deformations produced during the rolling process (ECSC)		4,4	—
7213 20 00	– Of free-cutting steel (ECSC)		5,4	—
	– Other, containing by weight less than 0,25 % of carbon
7213 31	– – Of circular cross-section measuring less than 14 mm in diameter (ECSC)
7213 31 20	– – – Of a type used for concrete reinforcement		4,4	—
	– – – Other
7213 31 81	– – – – Containing by weight 0,06 % or less of carbon		4,4	—
7213 31 89	– – – – Containing by weight more than 0,06 % of carbon		4,4	—
7213 39	– – Other (ECSC)
7213 39 10	– – – Containing by weight 0,06 % or less of carbon		4,4	—
7213 39 90	– – – Containing by weight more than 0,06 % of carbon		4,4	—
	– Other, containing by weight 0,25 % or more but less than 0,6 % of carbon
7213 41 00	– – Of circular cross-section measuring less than 14 mm in diameter (ECSC)		4,4	—
7213 49 00	– – Other (ECSC)		4,4	—
7213 50	– Other, containing by weight 0,6 % or more of carbon (ECSC)
7213 50 20	– – Of a type used for tyre cord		4,4	—
	– – Other
7213 50 81	– – – Containing by weight 0,6 % or more but not more than 0,75 % of carbon		4,4	—
7213 50 89	– – – Containing by weight more than 0,75 % of carbon		4,4	—
7214	Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling
7214 10 00	– Forged	10	4,4	—
7214 20 00	– Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling (ECSC)		4	—
7214 30 00	– Of free-cutting steel (ECSC)		5,4	—
7214 40	– Other, containing by weight less than 0,25 % of carbon (ECSC)
7214 40 10	– – Of rectangular (other than square) cross-section, rolled on four faces		4	—
	– – Other
7214 40 20	– – – Of a type used for concrete reinforcement		4	—
	– – – Other, of a circular cross-section measuring in diameter
7214 40 51	– – – – 80 mm or more		4	—
7214 40 59	– – – – Less than 80 mm		4	—
7214 40 80	– – – Other		4	—
7214 50	– Other, containing by weight 0,25 % or more but less than 0,6 % of carbon (ECSC)
7214 50 10	– – Of rectangular (other than square) cross-section, rolled on four faces		4	—
	– – Of circular cross-section measuring in diameter
7214 50 31	– – – 80 mm or more		4	—
7214 50 39	– – – Less than 80 mm		4	—
7214 50 90	– – Other		4	—
7214 60 00	– Other, containing by weight 0,6 % or more of carbon (ECSC)		4	—
7215	Other bars and rods of iron or non-alloy steel
7215 10 00	– Of free-cutting steel, not further worked than cold-formed or cold-finished	10	5,4	—
7215 20	– Other, not further worked than cold-formed or cold-finished, containing by weight less than 0,25 % of carbon
7215 20 10	– – Of rectangular (other than square) cross-section	10	4,4	—
7215 20 90	– – Other	10	4,4	—
7215 30 00	– Other, not further worked than cold-formed or cold-finished, containing by weight 0,25 % or more but less than 0,6 % of carbon	10	44	—
7215 40 00	– Other, not further worked than cold-formed or cold-finished, containing by weight 0,6 % or more of carbon	10	4,8	—
7215 90	– Other
7215 90 10	– – Hot-rolled, hot-drawn or extruded, not further worked than clad (ECSC)		3,4	—
7215 90 90	– – Other	10	4,4	—
7216	Angles, shapes and sections of iron or non-alloy steel
7216 10 00	– U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm (ECSC)		4	—
	– L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm
7216 21 00	– – L sections (ECSC)		4	—
7216 22 00	– – T sections (ECSC)		4	—
	– U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more
7216 31	– – U sections (ECSC)
	– – – Of a height of 80 mm or more but not exceeding 220 mm
7216 31 11	– – – – With parallel flange faces		4	—
7216 31 19	– – – – Other		4	—
	– – – Of a height exceeding 220 mm
7216 31 91	– – – – With parallel flange faces		4	—
7216 31 99	– – – – Other		4	—
7216 32	– – I sections (ECSC)
	– – – Of a height of 80 mm or more but not exceeding 220 mm
7216 32 11	– – – – With parallel flange faces		4	—
7216 32 19	– – – – Other		4	—
	– – – Of a height exceeding 220 mm
7216 32 91	– – – – With parallel flange faces		4	—
7216 32 99	– – – – Other		4	—
7216 33	– – H sections (ECSC)
7216 33 10	– – – Of a height of 80 mm or more but not exceeding 180 mm		4	—
7216 33 90	– – – Of a height exceeding 180 mm		4	—
7216 40	– L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more (ECSC)
7216 40 10	– – L sections		4	—
7216 40 90	– – T sections		4	—
7216 50	– Other angles, shapes and sections, not further worked than hot-rolled, hot-drawn or extruded (ECSC)
7216 50 10	– – With a cross-section which is capable of being enclosed in a square the side of which is 80 mm		4	—
	– – Other
7216 50 91	– – – Bulb flats		4	—
7216 50 99	– – – Other		4	—
7216 60	– Angles, shapes and sections, not further worked than cold-formed or cold-finished
	– – Obtained from flat-rolled products
7216 60 11	– – – C, L, U, Z, omega or open-ended sections	10	4,4	—
7216 60 19	– – – Other	10	4,4	—
7216 60 90	– – Other	10	4,4	—
7216 90	– Other
7216 90 10	– – Hot-rolled, hot-drawn or extruded, not further worked than clad (ECSC)		3,4	—
	– – Other
7216 90 50	– – – Forged	10	4,4	—
7216 90 60	– – – Hot-rolled, hot-drawn or extruded	10	4,4	—
	– – – Cold-formed or cold-finished
7216 90 91	– – – – Profiled (ribbed) sheets	10	4,4	—
	– – – – Other
	– – – – – Obtained from flat-rolled products
	– – – – – – Plated or coated with zinc, of a thickness of
7216 90 93	– – – – – – – Less than 2,5 mm	10	4,4	—
7216 90 95	– – – – – – – 2,5 mm or more	10	4,4	—
7216 90 97	– – – – – – Other	10	4,4	—
7216 90 98	– – – – – Other	10	4,4	—
7217	Wire of iron or non-alloy steel
	– Containing by weight less than 0,25 % of carbon
7217 11	– – Not plated or coated, whether or not polished
7217 11 10	– – – With a maximum cross-sectional dimension of less than 0,8 mm	10	4,8	—
	– – – With a maximum cross-sectional dimension of 0,8 mm or more
7217 11 91	– – – – Containing identations, ribs, grooves or other deformations produced during the rolling process	10	4,8	—
7217 11 99	– – – – Other	10	4,8	—
7217 12	– – Plated or coated with zinc
7217 12 10	– – – With a maximum cross-sectional dimension of less than 0,8 mm	10	4,8	—
7217 12 90	– – – With a maximum cross-sectional dimension of 0,8 mm or more	10	4,8	—
7217 13	– – Plated or coated with other base metals
	– – – With a maximum cross-sectional dimension of less than 0,8 mm
7217 13 11	– – – – Copper-coated	10	4,8	—
7217 13 19	– – – – Other	10	4,8	—
	– – – With a maximum cross-sectional dimension of 0,8 mm or more
7217 13 91	– – – – Copper-coated	10	4,8	—
7217 13 99	– – – – Other	10	4,8	—
7217 19	– – Other
7217 19 10	– – – With a maximum cross-sectional dimension of less than 0,8 mm	10	4,8	—
7217 19 90	– – – With a maximum cross-sectional dimension of 0,8 mm or more	10	4,8	—
	– Containing by weight 0,25 % or more but less than 0,6 % of carbon
7217 21 00	– – Not plated or coated, whether or not polished	10	4,8	—
7217 22 00	– – Plated or coated with zinc	10	4,8	—
7217 23 00	– – Plated or coated with other base metals	10	4,8	—
7217 29 00	– – Other	10	4,8	—
	– Containing by weight 0,6 % or more of carbon
7217 31 00	– – Not plated or coated, whether or not polished	10	4,8	—
7217 32 00	– – Plated or coated with zinc	10	4,8	—
7217 33 00	– – Plated or coated with other base metals	10	4,8	—
7217 39 00	– – Other	10	4,8	—
III.STAINLESS STEEL	III.STAINLESS STEEL
7218	Stainless steel in ingots or other primary forms; semi-finished products of stainless steel
7218 10 00	– Ingots and other primary forms (ECSC)		2,3	—
7218 90	– Other
	– – Of rectangular (including square) cross-section
	– – – Rolled or obtained by continuous casting (ECSC)
	– – – – Of a width measuring less than twice the thickness, containing by weight
7218 90 11	– – – – – 2,5 % or more of nickel		2,9	—
7218 90 13	– – – – – Less than 2,5 % of nickel		2,9	—
	– – – – Other, containing by weight
7218 90 15	– – – – – 2.5 % or more of nickel		2,9	—
7218 90 19	– – – – – Less than 2,5 % of nickel		2,9	—
7218 90 30	– – – Forged	8	3,4	—
	– – Other
7218 90 50	– – – Rolled or obtained by continuous casting (ECSC)		5,4	—
	– – – Forged
7218 90 91	– – – – Of circular or polygonal cross-section	9	5,4	—
7218 90 99	– – – – Other	10	3,4	—
7219	Flat-rolled products of stainless steel, of a width of 600 mm or more
	– Not further worked than hot-rolled, in coils
7219 11	– – Of a thickness exceeding 10 mm (ECSC)
7219 11 10	– – – Containing by weight 2,5 % or more of nickel		5,4	—
7219 11 90	– – – Containing by weight less than 2,5 % of nickel		5,4	—
7219 12	– – Of a thickness of 4,75 mm or more but not exceeding 10 mm (ECSC)
7219 12 10	– – – Containing by weight 2,5 % or more of nickel		5,4	—
7219 12 90	– – – Containing by weight less than 2,5 % of nickel		5,4	—
7219 13	– – Of a thickness of 3 mm or more but less than 4,75 mm (ECSC)
7219 13 10	– – – Containing by weight 2,5 % or more of nickel		5,4	—
7219 13 90	– – – Containing by weight less than 2,5 % of nickel		5,4	—
7219 14	– – Of a thickness of less than 3 mm (ECSC)
7219 14 10	– – – Containing by weight 2,5 % or more of nickel		5,4	—
7219 14 90	– – – Containing by weight less than 2,5 % of nickel		5,4	—
	– Not further worked than hot-rolled, not in coils
7219 21	– – Of a thickness exceeding 10 mm (ECSC)
	– – – Containing by weight 2,5 % or more of nickel, of a thickness
7219 21 11	– – – – Exceeding 13 mm		5,4	—
7219 21 19	– – – – Exceeding 10 mm but not exceeding 13 mm		5,4	—
7219 21 90	– – – Containing by weight less than 2,5 % of nickel		5,4	—
7219 22	– – Of a thickness of 4,75 mm or more but not exceeding 10 mm (ECSC)
7219 22 10	– – – Containing by weight 2,5 % or more of nickel		5,4	—
7219 22 90	– – – Containing by weight less than 2,5 % of nickel		5,4	—
7219 23	– – Of a thickness of 3 mm or more but less than 4,75 mm (ECSC)
7219 23 10	– – – Containing by weight 2,5 % or more of nickel		5,4	—
7219 23 90	– – – Containing by weight less than 2,5 % of nickel		5,4	—
7219 24	– – Of a thickness of less than 3 mm (ECSC)
7219 24 10	– – – Containing by weight 2,5 % or more of nickel		5,4	—
7219 24 90	– – – Containing by weight less than 2,5 % of nickel		5,4	—
	– Not further worked than cold-rolled (cold-reduced)
7219 31	– – Of a thickness of 4,75 mm or more (ECSC)
7219 31 10	– – – Containing by weight 2,5 % or more of nickel		5,4	—
7219 31 90	– – – Containing by weight less than 2,5 % of nickel		5,4	—
7219 32	– – Of a thickness of 3 mm or more but less than 4,75 mm (ECSC)
7219 32 10	– – – Containing by weight 2,5 % or more of nickel		5,4	—
7219 32 90	– – – Containing by weight less than 2,5 % of nickel		5,4	—
7219 33	– – Of a thickness exceeding 1 mm but less than 3 mm (ECSC)
7219 33 10	– – – Containing by weight 2,5 % or more of nickel		5,4	—
7219 33 90	– – – Containing by weight less than 2,5 % of nickel		5,4	—
7219 34	– – Of a thickness of 0,5 mm or more but not exceeding 1 mm (ECSC)
7219 34 10	– – – Containing by weight 2,5 % or more of nickel		5,4	—
7219 34 90	– – – Containing by weight less than 2,5 % of nickel		5,4	—
7219 35	– – Of a thickness of less than 0,5 mm (ECSC)
7219 35 10	– – – Containing by weight 2,5 % or more of nickel		5,4	—
7219 35 90	– – – Containing by weight less than 2,5 % of nickel		5,4	—
7219 90	– Other
	– – Not further worked than surface-treated, including cladding, or simply cut into shapes other than rectangular (including square) (ECSC)
7219 90 11	– – – Containing by weight 2,5 % or more of nickel		5,4	—
7219 90 19	– – – Containing by weight less than 2,5 % of nickel		5,4	—
	– – Other
7219 90 91	– – – Containing by weight 2,5 % or more of nickel	10	5,4	—
7219 90 99	– – – Containing by weight less than 2,5 % of nickel	10	5,4	—
7220	Flat-rolled products of stainless steel, of a width of less than 600 mm
	– Not further worked than hot-rolled
7220 11 00	– – Of a thickness of 4,75 mm or more (ECSC)		5,4	—
7220 12 00	– – Of a thickness of less than 4,75 mm (ECSC)		5,4	—
7220 20	– Not further worked than cold-rolled (cold-reduced)
7220 20 10	– – Of a width exceeding 500 mm (ECSC)		5,4	—
	– – Of a width not exceeding 500 mm
	– – – Of a thickness of 3 mm or more, containing by weight
7220 20 31	– – – – 2,5 % or more of nickel	10	5,4	—
7220 20 39	– – – – Less than 2,5 % of nickel	10	5,4	—
	– – – Of a thickness exceeding 0,35 mm but less than 3 mm, containing by weight
7220 20 51	– – – – 2,5 % or more of nickel	10	5,4	—
7220 20 59	– – – – Less than 2,5 % of nickel	10	5,4	—
	– – – Of a thickness not exceeding 0,35 mm, containing by weight
7220 20 91	– – – – 2,5 % or more of nickel	10	5,4	—
7220 20 99	– – – – Less than 2,5 % of nickel	10	5,4	—
7220 90	– Other
	– – Of a width exceeding 500 mm
7220 90 11	– – – Not further worked than surface-treated, including cladding (ECSC)		5,4	—
7220 90 19	– – – Other	10	5,4	—
	– – Of a width not exceeding 500 mm
	– – – Not further worked than surface-treated, including cladding
7220 90 31	– – – – Hot-rolled, not further worked than clad (ECSC)		5,4	—
7220 90 39	– – – – Other	10	5,4	—
7220 90 90	– – – Other	10	5,4	—
7221 00	Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel (ECSC)
7221 00 10	– Containing by weight 2,5 % or more of nickel		5,4	—
7221 00 90	– Containing by weight less than 2,5 % of nickel		5,4	—
7222	Other bars and rods of stainless steel; angles, shapes and sections of stainless steel
7222 10	– Bars and rods, not further worked than hot-rolled, hot-drawn or extruded (ECSC)
	– – Of circular cross-section
	– – – Of a diameter of 80 mm or more, containing by weight
7222 10 11	– – – – 2,5 % or more of nickel		5,4	—
7222 10 19	– – – – Less than 2,5 % of nickel		5,4	—
	– – – Of a diameter of 25 mm or more, but less than 80 mm, containing by weight
7222 10 21	– – – – 2,5 % or more of nickel		5,4	—
7222 10 29	– – – – Less than 2,5 % of nickel		5,4	—
	– – – Of a diameter of less than 25 mm, containing by weight
7222 10 31	– – – – 2,5 % or more of nickel		5,4	—
7222 10 39	– – – – Less than 2,5 % of nickel		5,4	—
	– – Other, containing by weight
7222 10 81	– – – 2,5 % or more of nickel		5,4	—
7222 10 89	– – – Less than 2,5 % of nickel		5,4	—
7222 20	– Bars and rods, not further worked than cold-formed or cold-finished
	– – Of circular cross-section
	– – – Of a diameter of 80 mm or more, containing by weight
7222 20 11	– – – – 2,5 % or more of nickel	10	5,4	—
7222 20 19	– – – – Less than 2,5 % of nickel	10	5,4	—
	– – – Of a diameter of 25 mm or more, but less than 80 mm, containing by weight
7222 20 21	– – – – 2,5 % or more of nickel	10	5,4	—
7222 20 29	– – – – Less than 2,5 % of nickel	10	5,4	—
	– – – Of a diameter of less than 25 mm, containing by weight
7222 20 31	– – – – 2,5 % or more of nickel	10	5,4	—
7222 20 39	– – – – Less than 2,5 % of nickel	10	5,4	—
	– – Other, containing by weight
7222 20 81	– – – 2,5 % or more of nickel	10	5,4	—
7222 20 89	– – – Less than 2,5 % of nickel	10	5,4	—
7222 30	– Other bars and rods
7222 30 10	– – Hot-rolled, hot-drawn or extruded, not further worked than clad (ECSC)		4,5	—
	– – Other
	– – – Containing by weight 2,5 % or more of nickel
7222 30 51	– – – – Forged	10	5,4	—
7222 30 59	– – – – Other	10	5,4	—
	– – – Containing by weight less than 2,5 % of nickel
7222 30 91	– – – – Forged	10	5,4	—
7222 30 99	– – – – Other	10	5,4	—
7222 40	– Angles, shapes and sections
	– – Not further worked than hot-rolled, hot-drawn or extruded (ECSC)
7222 40 11	– – – Containing by weight 2,5 % or more of nickel		5,4	—
7222 40 19	– – – Containing by weight less than 2,5 % of nickel		5,4	—
	– – Other
7222 40 30	– – – Hot-rolled, hot-drawn or extruded, not further worked than clad (ECSC)		4,5	—
	– – – Other
	– – – – Not further worked than cold-formed or cold-finished
7222 40 91	– – – – – Obtained from flat-rolled products	10	5,4	—
7222 40 93	– – – – – Other	10	5,4	—
7222 40 99	– – – – Other	10	5,4	—
7223 00	Wire of stainless steel
	– Containing by weight 2,5 % or more of nickel
7223 00 11	– – Containing by weight 28 % or more but not more than 31 % of nickel and 20 % or more but not more than 22 % of chromium	10	5,4	—
7223 00 19	– – Other	10	5,4	—
	– Containing by weight less than 2,5 % of nickel
7223 00 91	– – Containing by weight 13 % or more but not more than 25 % of chromium and 3,5 % or more but not more than 6 % of aluminium	10	5,4	—
7223 00 99	– – Other	10	5,4	—
IV.OTHER ALLOY STEEL; HOLLOW DRILL BARS AND RODS, OF ALLOY OR NON-ALLOY STEEL	IV.OTHER ALLOY STEEL; HOLLOW DRILL BARS AND RODS, OF ALLOY OR NON-ALLOY STEEL
7224	Other alloy steel in ingots or other primary forms; semi-finished products of other alloy steel
7224 10 00	– Ingots and other primary forms (ECSC)		2,3	—
7224 90	– Other
	– – Of rectangular (including square) cross-section
	– – – Hot-rolled or obtained by continuous casting (ECSC)
	– – – – The width measuring less than twice the thickness
7224 90 01	– – – – – Of high-speed steel		2,9	—
7224 90 05	– – – – – Containing by weight not more than 0,7 % of carbon, 0,5 % or more but not more than 1,2 % of manganese and 0,6 % or more but not more than 2,3 % of silicon; containing by weight 0,0008 % or more of boron with any other element less than the minimum content referred to in note 1 (f) to this chapter		2,9	—
7224 90 08	– – – – – Other		2,9	—
7224 90 15	– – – – Other		2,9	—
7224 90 19	– – – Forged	8	3,4	—
	– – Other
	– – – Hot-rolled or obtained by continuous casting (ECSC)
7224 90 31	– – – – Containing by weight not less than 0,9 % but not more than 1,15 % of carbon, not less than 0,5 % but not more than 2 % of chromium and, if present, not more than 0,5 % of molybdenum		5,4	—
7224 90 39	– – – – Other		5,4	—
	– – – Forged
7224 90 91	– – – – Of circular or polygonal cross-section	9	5,4	—
7224 90 99	– – – – Other	10	3,4	—
7225	Flat-rolled products of other alloy steel, of a width of 600 mm or more
7225 10	– Of silicon-electrical steel (ECSC)
7225 10 10	– – Hot-rolled		5,4	—
	– – – – Cold-rolled
7225 10 91	– – – Grain oriented		5,4	—
7225 10 99	– – – Non grain oriented		5,4	—
7225 20	– Of high speed steel
7225 20 20	– – Not further worked than rolled; not further worked than surface-treated, including cladding or simply cut into shapes other than rectangular (including square) (ECSC)		5,4	—
7225 20 90	– – Other	10	5,4	—
7225 30 00	– Other, not further worked than hot-rolled, in coils (ECSC)		5,4	—
7225 40	– Other, not further worked than hot-rolled, not in coils (ECSC)
7225 40 10	– – Of a thickness exceeding 20 mm		5,4	—
7225 40 30	– – Of a thickness exceeding 15 mm but not exceeding 20 mm		5,4	—
7225 40 50	– – Of a thickness of 4,75 mm or more but not exceeding 15 mm		5,4	—
7225 40 70	– – Of a thickness of 3 mm or more but less than 4,75 mm		5,4	—
7225 40 90	– – Of a thickness of less than 3 mm		5,4	—
7225 50	– Other, not further worked than cold-rolled (cold-reduced) (ECSC)
7225 50 10	– – Containing by weight less than 0,6 % of silicon and not less than 0,3 % but not more than 1 % of aluminium		5,4	—
7225 50 90	– – Other		5,4	—
7225 90	– Other
7225 90 10	– – Not further worked than surface-treated, including cladding or simply cut into shapes other than rectangular (including square) (ECSC)		5,4	—
7225 90 90	– – Other	10	5,4	—
7226	Flat-rolled products of other alloy steel, of a width of less than 600 mm
7226 10	– Of silicon-electrical steel
7226 10 10	– – Not further worked than hot-rolled (ECSC)		5,4	—
	– – Other
	– – – Of a width exceeding 500 mm (ECSC)
7226 10 31	– – – – Grain oriented		5,4	—
7226 10 39	– – – – Non-grain oriented		5,4	—
	– – – Of a width not exceeding 500 mm
7226 10 91	– – – – Grain oriented	10	5,4	—
7226 10 99	– – – – Non-grain oriented	10	5,4	—
7226 20	– Of high-speed steel
7226 20 20	– – Not further worked than hot-rolled; of a width not exceeding 500 mm, hot-rolled, not further worked than clad; of a width exceeding 500 mm, not further worked than cold-rolled (cold-reduced) or not further worked than surface-treated, including cladding (ECSC)		5,4	—
7226 20 80	– – Other	10	5,4	—
	– Other
7226 91	– – Not further worked than hot-rolled (ECSC)
7226 91 10	– – – Of a thickness of 4,75 mm or more		5,4	—
7226 91 90	– – – Of a thickness of less than 4,75 mm		5,4	—
7226 92	– – Not further worked than cold-rolled (cold-reduced)
7226 92 10	– – – Of a width exceeding 500 mm (ECSC)		5,4	—
	– – – Of a width not exceeding 500 mm
7226 92 91	– – – – Containing by weight less than 0,6 % of silicon and not less than 0,3 % but not more than 1 % of aluminium	10	5,4	—
7226 92 99	– – – – Other	10	5,4	—
7226 99	– – Other
7226 99 20	– – – Of a width not exceeding 500 mm, hot-rolled, not further worked than clad; of a width exceeding 500 mm, not further worked than surface-treated, including cladding (ECSC)		5,4	—
7226 99 80	– – – Other	10	5,4	—
7227	Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel
7227 10 00	– Of high-speed steel (ECSC)		5,4	—
7227 20 00	– Of silico-manganese steel (ECSC)		5,4	—
7227 90	– Other (ECSC)
7227 90 10	– – Containing by weight 0,0008 % or more of boron with any other element less than the minimum content referred to in note 1 (f) to this chapter		5,4	—
7227 90 30	– – Containing by weight less than 0,35 % of carbon, 0,5 % or more but not more than 1,2 % of manganese and 0,6 % or more but not more than 2,3 % of silicon		5,4	—
7227 90 50	– – Containing by weight not less than 0,9 % but not more than 1,15 % of carbon, not less than 0,5 % but not more than 2 % of chromium and, if present, not more than 0,5 % of molybdenum		5,4	—
7227 90 70	– – Other		5,4	—
7228	Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel
7228 10	– Bars and rods, of high-speed steel
7228 10 10	– – Not further worked than hot-rolled, hot-drawn or extruded (ECSC)		5,4	—
	– – Other
7228 10 30	– – – Hot-rolled, hot-drawn or extruded, not further worked than clad (ECSC)		4,5	—
7228 10 50	– – – Forged	10	5,4	—
7228 10 90	– – – Other	10	5,4	—
7228 20	– Bars and rods, of silico-manganese steel
	– – Not further worked than hot-rolled, hot-drawn or extruded (ECSC)
7228 20 11	– – – Of rectangular (other than square) cross-section, rolled on four faces		5,4	—
7228 20 19	– – – Other		5,4	—
	– – Other
7228 20 30	– – – Hot-rolled, hot-drawn or extruded, not further worked than clad (ECSC)		4,5	—
7228 20 60	– – – Other	10	5,4	—
7228 30	– Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded (ECSC)
7228 30 20	– – Of tool steel		5,4	—
	– – Containing by weight not less than 0,9 % but not more than 1,15 % of carbon, not less than 0,5 % but not more than 2 % of chromium and, if present, not more than 0,5 % of molybdenum
7228 30 41	– – – Of circular cross-section of a diameter of 80 mm or more		5,4	—
7228 30 49	– – – Other		5,4	—
	– – Other
	– – – Of circular cross-section, of a diameter of
7228 30 61	– – – – 80 mm or more		5,4	—
7228 30 69	– – – – Less than 80 mm		5,4	—
7228 30 70	– – – Or rectangular (other than square) cross-section, rolled on four faces		5,4	—
7228 30 89	– – – Other		5,4	—
7228 40	– Other bars and rods, not further worked than forged
7228 40 10	– – Of tool steel	9	5,4	—
7228 40 90	– – Other	9	5,4	—
7228 50	– Other bars and rods, not further worked than cold-formed or cold-finished
7228 50 20	– – Of tool steel	10	5,4	—
7228 50 40	– – Containing by weight not less than 0,9 % but not more than 1,15 % of carbon, not less than 0,5 % but not more than 2 % of chromium and, if present, not more than 0,5 % of molybdenum	10	5,4	—
	– – Other
	– – – Of circular cross-section, of a diameter of
7228 50 61	– – – – 80 mm or more	10	5,4	—
7228 50 69	– – – – Less than 80 mm	10	5,4	—
7228 50 70	– – – Of rectangular (other than square) cross-section, rolled on four faces	10	5,4	—
7228 50 89	– – – Other	10	5,4	—
7228 60	– Other bars and rods
7228 60 10	– – Hot-rolled, hot-drawn or extruded, not further worked than clad (ECSC)		4,5	—
	– – Other
7228 60 81	– – – Of tool steel	10	5,4	—
7228 60 89	– – – Other	10	5,4	—
7228 70	– Angles, shapes and sections
7228 70 10	– – Not further worked than hot-rolled, hot-drawn or extruded (ECSC)		5,4	—
	– – Other
7228 70 31	– – – Hot-rolled, hot-drawn or extruded, not further worked than clad (ECSC)		4,5	—
	– – – Other
7228 70 91	– – – – Not further worked than cold-formed or cold-finished	10	5,4	—
7228 70 99	– – – – Other	10	5,4	—
7228 80	– Hollow drill bars and rods
7228 80 10	– – Of alloy steel (ECSC)		5,4	—
7228 80 90	– – Of non-alloy steel (ECSC)		3,4	—
7229	Wire of other alloy steel
7229 10 00	– Of high-speed steel	10	5,4	—
7229 20 00	– Of silico-manganese steel	10	5,4	—
7229 90	– Other
7229 90 10	– – Containing by weight less than 0,35 % of carbon, 0,5 % or more but not more than 1,2% of manganese and 0,6 % or more but not more than 2,3 % of silicon	10	5,4	—
7229 90 50	– – Containing by weight not less than 0,9 % but not more than 1,15 % of carbon, not less than 0,5 % but not more than 2 % of chromium and, if present, not more than 0,5 % of molybdenum	10	5,4	—
7229 90 90	– – Other	10	5,4	—

CHAPTER 73

ARTICLES OF IRON OR STEEL

Notes

1. In this chapter the expression ‘cast iron’ applies to products obtained by casting in which iron predominates by weight over each of the other elements and which do not comply with the chemical composition of steel as defined in note 1 (d) to Chapter 72.

1. In this chapter the word ‘wire’ means hot- or cold-formed products of any cross-sectional shape, of which no cross-sectional dimension exceeds 16 mm.

Reading this document does not replace reading the official text published in the Official Journal of the European Union. We assume no responsibility for any inaccuracies arising from the conversion of the original to this format.

This text is published under EUR-Lex's own terms of reuse, not a Legalize or public-domain licence. EUR-Lex
Creative Commons Attribution 4.0 International (CC BY 4.0)
© European Union, https://eur-lex.europa.eu — Source: EUR-Lex (Publications Office of the European Union). Reused under the Creative Commons Attribution 4.0 International (CC BY 4.0) licence. Only EU legislation published in the printed Official Journal of the European Union is deemed authentic; consolidated texts are reproduced here for documentation purposes and have been reformatted to Markdown.