LegalizeCommission Regulation (EC) No 1359/95 of 13 June 1995 amending Annexes I and II to Council Regulation (EEC) No 2658/87 on the tariff and statistical nomenclature and on the Common Customs Tariff, and repealing Regulation (EEC) No 802/80
This is the act as published. Later amendments are not folded into the text below: each one is a separate act in this repository and an entry in this law's history.
| CN code | Description | autonomous (%) | conventional (%) | Supplementary unit |
| (1) | (2) | (3) | (4) | (5) |
| 7301 | Sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements; welded angles, shapes and sections, of iron or steel | |||
| 7301 10 00 | – Sheet piling (ECSC) | 4 | — | |
| 7301 20 00 | – Angles, shapes and sections | 14 | 3,7 | — |
| 7302 | Railway or tramway track construction material of iron or steel, the following: rails, check-rails and rack rails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers (cross-ties), fish-plates, chairs, chair wedges, sole plates (base plates), rail clips, bedplates, ties and other material specialized for jointing or fixing rails | |||
| 7302 10 | – Rails | |||
| 7302 10 10 | – – Current-conducting, with parts of non-ferrous metal | 18 | 5,2 | — |
| – – Other | ||||
| – – – New (ECSC) | ||||
| 7302 10 31 | – – – – Of a weight per m of 20 kg or more | 4 | — | |
| 7302 10 39 | – – – – Of a weight per m of less than 20 kg | 4 | — | |
| 7302 10 90 | – – – Used (ECSC) | 2,3 | — | |
| 7302 20 00 | – Sleepers (cross-ties) (ECSC) | 3,4 | — | |
| 7302 30 00 | – Switch blades, crossing frogs, point rods and other crossing pieces | 14 | 4,5 | — |
| 7302 40 | – Fish-plates and sole plates | |||
| 7302 40 10 | – – Rolled (ECSC) | 3,4 | — | |
| 7302 40 90 | – – Other | 15 | 4,6 | — |
| 7302 90 | – Other | |||
| 7302 90 10 | – – Check-rails (ECSC) | 3,4 | — | |
| 7302 90 30 | – – Rail clips, bedplates and ties | 14 | 4,4 | — |
| 7302 90 90 | – – Other | 14 | 4,4 | — |
| 7303 00 | Tubes, pipes and hollow profiles, of cast iron | |||
| 7303 00 10 | – Tubes and pipes of a kind used in pressure systems | 13 | 5,3 | — |
| 7303 00 90 | – Other | 13 | 5,3 | — |
| 7304 | Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel | |||
| 7304 10 | – Line pipe of a kind used for oil or gas pipelines | |||
| 7304 10 10 | – – Of an external diameter not exceeding 168,3 mm | 14 | 9 | — |
| 7304 10 30 | – – Of an external diameter exceeding 168,3 mm, but not exceeding 406,4 mm | 14 | 9 | — |
| 7304 10 90 | – – Of an external diameter exceeding 406,4 mm | 14 | 9 | — |
| 7304 20 | – Casing, tubing and drill pipe, of a kind used in drilling for oil or gas | |||
| 7304 20 10 | – – Drill pipe | 9 | 2,6 | — |
| – – Other | ||||
| 7304 20 91 | – – – Of an external diameter not exceeding 406,4 mm | 14 | 9 | — |
| 7304 20 99 | – – – Of an external diameter exceeding 406,4 mm | 14 | 9 | — |
| – Other, of circular cross-section, of iron or non-alloy steel | ||||
| 7304 31 | – – Cold-drawn or cold-rolled (cold-reduced) | |||
| 7304 31 10 | – – – With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft(52) | 14 | Free | — |
| – – – Other | ||||
| 7304 31 91 | – – – – Precision tubes | 14 | 9 | — |
| 7304 31 99 | – – – – Other | 14 | 9 | — |
| 7304 39 | – – Other | |||
| 7304 39 10 | – – – Unworked, straight and of uniform wall-thickness, for use solely in the manufacture of tubes and pipes with other cross-sections and wall-thicknesses(7) | 14 | 8,1 | — |
| – – – Other | ||||
| 7304 39 20 | – – – – With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft(52) | 14 | Free | — |
| – – – – Other | ||||
| 7304 39 30 | – – – – – Of an external diameter exceeding 421 mm and of a wall-thickness exceeding 10,5 mm | 13 | 8,1 | — |
| – – – – – Other | ||||
| – – – – – – Threaded or threadable tubes (gas pipe) | ||||
| 7304 39 51 | – – – – – – – Pated or coated with zinc | 14 | 9 | — |
| 7304 39 59 | – – – – – – – Other | 14 | 9 | — |
| – – – – – – Other, of an external diameter | ||||
| 7304 39 91 | – – – – – – – Not exceeding 168,3 mm | 14 | 9 | — |
| 7304 39 93 | – – – – – – – Exceeding 168,3 mm, but not exceeding 406,4 mm | 14 | 9 | — |
| 7304 39 99 | – – – – – – – Exceeding 406,4 mm | 14 | 9 | — |
| – Other, of circular cross-section, of stainless steel | ||||
| 7304 41 | – – Cold-drawn or cold-rolled (cold-reduced) | |||
| 7304 41 10 | – – – With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft(52) | 14 | Free | — |
| 7304 41 90 | – – – Other | 14 | 9 | — |
| 7304 49 | – – Other | |||
| 7304 49 10 | – – – Unworked, straight and of uniform wall-thickness, for use solely in the manufacture of tubes and pipes with other cross-sections and wall-thicknesses(7) | 14 | 8,1 | — |
| – – – Other | ||||
| 7304 49 30 | – – – – With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft(52) | 14 | Free | — |
| – – – – Other | ||||
| 7304 49 91 | – – – – – Of an external diameter not exceeding 406,4 mm | 14 | 9 | — |
| 7304 49 99 | – – – – – Of an external diameter exceeding 406,4 mm | 14 | 9 | — |
| – Other, of circular cross-section, of other alloy steel | ||||
| 7304 51 | – – Cold-drawn or cold-rolled (cold-reduced) | |||
| – – – Straight and of uniform wall-thickness, of alloy steel containing by weight not less than 0,9 % but not more than 1,15 % of carbon, not less than 0,5 % but not more than 2 % of chromium and, if present, not more than 0,5 % of molybdenum, of a length | ||||
| 7304 51 11 | – – – – Not exceeding 4,5 m | 14 | 8,1 | — |
| 7304 51 19 | – – – – Exceeding 4,5 m | 14 | 9 | — |
| – – – Other | ||||
| 7304 51 30 | – – – – With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft(52) | 14 | Free | — |
| – – – – Other | ||||
| 7304 51 91 | – – – – – Precision tubes | 14 | 9 | — |
| 7304 51 99 | – – – – – Other | 14 | 9 | — |
| 7304 59 | – – Other | |||
| 7304 59 10 | – – – Unworked, straight and of uniform wall-thickness, for use solely in the manufacture of tubes and pipes with other cross-sections and wall-thicknesses(7) | 14 | 8,1 | — |
| – – – Other, straight and of uniform wall-thickness, of alloy steel containing by weight not less than 0,9 % but not more than 1,15 % of carbon, not less than 0,5 % but not more than 2 % of chromium and, if present, not more than 0,5 % of molybdenum, of a length | ||||
| 7304 59 31 | – – – – Not exceeding 4,5 m | 14 | 8,1 | — |
| 7304 59 39 | – – – – Exceeding 4,5 m | 14 | 9 | — |
| – – – Other | ||||
| 7304 59 50 | – – – – With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft(52) | 14 | Free | — |
| – – – – Other | ||||
| 7304 59 91 | – – – – – Of an external diameter not exceeding 168,3 mm | 14 | 9 | — |
| 7304 59 93 | – – – – – Of an external diameter exceeding 168,3 mm, but not exceeding 406,4 mm | 14 | 9 | — |
| 7304 59 99 | – – – – – Of an external diameter exceeding 406,4 mm | 14 | 9 | — |
| 7304 90 | – Other | |||
| 7304 90 10 | – – With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft(52) | 14 | Free | — |
| 7304 90 90 | – – Other | 14 | 9 | — |
| 7305 | Other tubes and pipes (for example, welded, riveted or similarly closed), having internal and external circular cross-sections, the external diameter of which exceeds 406,4 mm, of iron or steel | |||
| – Line pipe of a kind used for oil or gas pipelines | ||||
| 7305 11 00 | – – Longitudinally submerged arc welded | 14 | 9 | — |
| 7305 12 00 | – – Other, longitudinally welded | 14 | 9 | — |
| 7305 19 00 | – – Other | 14 | 9 | — |
| 7305 20 | – Casing of a kind used in drilling for oil or gas | |||
| 7305 20 10 | – – Longitudinally welded | 14 | 9 | — |
| 7305 20 90 | – – Other | 14 | 9 | — |
| – Other, welded | ||||
| 7305 31 00 | – – Longitudinally welded | 14 | 9 | — |
| 7305 39 00 | – – Other | 14 | 9 | — |
| 7305 90 00 | – Other | 14 | 9 | — |
| 7306 | Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel | |||
| 7306 10 | – Line pipe of a kind used for oil or gas pipelines | |||
| – – Longitudinally welded, of an external diameter of | ||||
| 7306 10 11 | – – – Not more than 168,3 mm | 14 | 9 | — |
| 7306 10 19 | – – – More than 168,3 mm, but not more than 406,4 mm | 14 | 9 | — |
| 7306 10 90 | – – Spirally welded | 14 | 9 | — |
| 7306 20 00 | – Casing and tubing of a kind used in drilling for oil or gas | 14 | 9 | — |
| 7306 30 | – Other, welded, of circular cross-section, of iron or non-alloy steel | |||
| 7306 30 10 | – – With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft(52) | 14 | Free | — |
| – – Other | ||||
| – – – Precision tubes, with a wall thickness | ||||
| 7306 30 21 | – – – – Not exceeding 2 mm | 14 | 9 | — |
| 7306 30 29 | – – – – Exceeding 2 mm | 14 | 9 | — |
| – – – Other | ||||
| – – – – Threaded or threadable tubes (gas pipe) | ||||
| 7306 30 51 | – – – – – Plated or coated with zinc | 14 | 9 | — |
| 7306 30 59 | – – – – – Other | 14 | 9 | — |
| – – – – Other, of an external diameter | ||||
| – – – – – Not exceeding 168,3 mm | ||||
| 7306 30 71 | – – – – – – Plated or coated with zinc | 14 | 9 | — |
| 7306 30 78 | – – – – – – Other | 14 | 9 | — |
| 7306 30 90 | – – – – – Exceeding 168,3 mm, but not exceeding 406,4 mm | 14 | 9 | — |
| 7306 40 | – Other, welded, of circular cross-section, of stainless steel | |||
| 7306 40 10 | – – With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft(52) | 14 | Free | — |
| – – Other | ||||
| 7306 40 91 | – – – Cold-drawn or cold-rolled (cold-reduced) | 14 | 9 | — |
| 7306 40 99 | – – – Other | 14 | 9 | — |
| 7306 50 | – Other, welded, of circular cross-section, of other alloy steel | |||
| 7306 50 10 | – – With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft(52) | 14 | Free | — |
| – – Other | ||||
| 7306 50 91 | – – – Precision tubes | 14 | 9 | — |
| 7306 50 99 | – – – Other | 14 | 9 | — |
| 7306 60 | – Other, welded, of non-circular cross-section | |||
| 7306 60 10 | – – With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft(52) | 14 | Free | — |
| – – Other | ||||
| – – – Of rectangular (including square) cross-section, with a wall thickness | ||||
| 7306 60 31 | – – – – Not exceeding 2 mm | 14 | 9 | — |
| 7306 60 39 | – – – – Exceeding 2 mm | 14 | 9 | — |
| 7306 60 90 | – – – Of other sections | 14 | 9 | — |
| 7306 90 00 | – Other | 14 | 9 | — |
| 7307 | Tube or pipe fittings (for example couplings, elbows, sleeves), of iron or steel | |||
| – Cast fittings | ||||
| 7307 11 | – – Of non-malleable cast iron | |||
| 7307 11 10 | – – – Of a kind used in pressure systems | 14 | 5,7 | — |
| 7307 11 90 | – – – Other | 14 | 5,7 | — |
| 7307 19 | – – Other | |||
| 7307 19 10 | – – – Of malleable cast iron | 14 | 5,7 | — |
| 7307 19 90 | – – – Other | 14 | 5,7 | — |
| – Other, of stainless steel | ||||
| 7307 21 00 | – – Flanges | 14 | 5,7 | — |
| 7307 22 | – – Threaded elbows, bends and sleeves | |||
| 7307 22 10 | – – – Sleeves | 14 | 5,6 | — |
| 7307 22 90 | – – – Elbows and bends | 14 | 5,7 | — |
| 7307 23 | – – Butt welding fittings | |||
| 7307 23 10 | – – – Elbows and bends | 14 | 5,7 | — |
| 7307 23 90 | – – – Other | 14 | 5,7 | — |
| 7307 29 | – – Other | |||
| 7307 29 10 | – – – Threaded | 14 | 5,7 | — |
| 7307 29 30 | – – – For welding | 14 | 5,7 | — |
| 7307 29 90 | – – – Other | 14 | 5,7 | — |
| – Other | ||||
| 7307 91 00 | – – Flanges | 14 | 5,7 | — |
| 7307 92 | – – Threaded elbows, bends and sleeves | |||
| 7307 92 10 | – – – Sleeves | 14 | 5,6 | — |
| 7307 92 90 | – – – Elbows and bends | 14 | 5,7 | — |
| 7307 93 | – – Butt welding fittings | |||
| – – – With greatest external diameter not exceeding 609,6 mm | ||||
| 7307 93 11 | – – – – Elbows and bends | 14 | 5,7 | — |
| 7307 93 19 | – – – – Other | 14 | 5,7 | — |
| – – – With greatest external diameter exceeding 609,6 mm | ||||
| 7307 93 91 | – – – – Elbows and bends | 14 | 5,7 | — |
| 7307 93 99 | – – – – Other | 14 | 5,7 | — |
| 7307 99 | – – Other | |||
| 7307 99 10 | – – – Threaded | 14 | 5,7 | — |
| 7307 99 30 | – – – For welding | 14 | 5,7 | — |
| 7307 99 90 | – – – Other | 14 | 5,7 | — |
| 7308 | Structures (excluding prefabricated buildings of heading No 9406) and parts of structures (for example, bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns), of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel | |||
| 7308 10 00 | – Bridges and bridge-sections | 14 | 3,7 | — |
| 7308 20 00 | – Towers and lattice masts | 14 | 3,7 | — |
| 7308 30 00 | – Doors, windows and their frames and thresholds for doors | 14 | 3,7 | — |
| 7308 40 | – Equipment for scaffolding, shuttering, propping or pit-propping | |||
| 7308 40 10 | – – Mine supports | 14 | 3,7 | — |
| 7308 40 90 | – – Other | 14 | 3,7 | — |
| 7308 90 | – Other | |||
| 7308 90 10 | – – Weirs, sluices, lock-gates, landing stages, fixed docks and other maritime and waterway structures | 14 | 3,7 | — |
| – – Other | ||||
| – – – Solely or principally of sheet | ||||
| 7308 90 51 | – – – – Panels comprising two walls of profiled (ribbed) sheet with an insulating core | 14 | 3,7 | — |
| 7308 90 59 | – – – – Other | 14 | 3,7 | — |
| 7308 90 99 | – – – Other | 14 | 3,7 | — |
| 7309 00 | Reservoirs, tanks, vats and similar containers for any material (other than compressed or liquefied gas), of iron or steel, of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment | |||
| 7309 00 10 | – For gases (other than compressed or liquefied gas) | 15 | 3,6 | — |
| – For liquids | ||||
| 7309 00 30 | – – Lined or heat-insulated | 15 | 3,6 | — |
| – – Other, of a capacity | ||||
| 7309 00 51 | – – – Exceeding 100 000 litres | 15 | 3,6 | — |
| 7309 00 59 | – – – Not exceeding 100 000 litres | 15 | 3,6 | — |
| 7309 00 90 | – For solids | 15 | 3,6 | — |
| 7310 | Tanks, casks, drums, cans, boxes and similar containers, for any material (other than compressed or liquefied gas), of iron or steel, of a capacity not exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment | |||
| 7310 10 00 | – Of a capacity of 50 litres or more | 17 | 4,4 | — |
| – Of a capacity of less than 50 litres | ||||
| 7310 21 | – – Cans which are to be closed by soldering or crimping | |||
| 7310 21 10 | – – – Cans of a kind used for preserving food and drink | 17 | 4,5 | — |
| – – – Other, with a wall thickness of | ||||
| 7310 21 91 | – – – – Less than 0,5 mm | 17 | 4,5 | — |
| 7310 21 99 | – – – – 0,5 mm or more | 17 | 4,5 | — |
| 7310 29 | – – Other | |||
| 7310 29 10 | – – – With a wall thickness of less than 0,5 mm | 17 | 4,5 | — |
| 7310 29 90 | – – – With a wall thickness of 0,5 mm or more | 17 | 4,5 | — |
| 7311 00 | Containers for compressed or liquefied gas, of iron or steel | |||
| 7311 00 10 | – Seamless | 17 | 4,5 | — |
| – Other, of a capacity of | ||||
| 7311 00 91 | – – Less than 1 000 litres | 17 | 4,5 | — |
| 7311 00 99 | – – 1 000 litres or more | 17 | 4,5 | — |
| 7312 | Stranded wire, ropes, cables, plaited bands, slings and the like, of iron or steel, not electrically insulated | |||
| 7312 10 | – Stranded wire, ropes and cables | |||
| 7312 10 10 | – – With fittings attached, or made up into articles, for use in civil aircraft(52) | 17 | Free | — |
| – – Other | ||||
| 7312 10 30 | – – – Of stainless steel | 17 | 5 | — |
| – – – Other, with a maximum cross-sectional dimension | ||||
| – – – – Not exceeding 3 mm | ||||
| 7312 10 51 | – – – – – Plated or coated with copper-zinc alloys (brass) | 17 | 5 | — |
| 7312 10 59 | – – – – – Other | 17 | 5 | — |
| – – – – Exceeding 3 mm | ||||
| – – – – – Stranded wire | ||||
| 7312 10 71 | – – – – – – Not coated | 17 | 5 | — |
| – – – – – – Coated | ||||
| 7312 10 75 | – – – – – – – Plated or coated with zinc | 17 | 5 | — |
| 7312 10 79 | – – – – – – – Other | 17 | 5 | — |
| – – – – – Ropes and cables (including locked coil ropes) | ||||
| – – – – – – Not coated or only plated or coated with zinc, with a maximum cross-sectional dimension | ||||
| 7312 10 82 | – – – – – – – Exceeding 3 mm but not exceeding 12 mm | 17 | 5 | — |
| 7312 10 84 | – – – – – – – Exceeding 12 mm but not exceeding 24 mm | 17 | 5 | — |
| 7312 10 86 | – – – – – – – Exceeding 24 mm but not exceeding 48 mm | 17 | 5 | — |
| 7312 10 88 | – – – – – – – Exceeding 48 mm | 17 | 5 | — |
| 7312 10 99 | – – – – – – Other | 17 | 5 | — |
| 7312 90 | – Other | |||
| 7312 90 10 | – – With fittings attached, or made up into articles for use in civil aircraft(52) | 17 | Free | — |
| 7312 90 90 | – – Other | 17 | 5 | — |
| 7313 00 00 | Barbed wire of iron or steel; twisted hoop or single flat wire, barbed or not, and loosely twisted double wire, of a kind used for fencing, of iron or steel | 15 | 8,1 | — |
| 7314 | Cloth (including endless bands), grill, netting and fencing, of iron or steel wire; expanded metal of iron or steel | |||
| – – Woven products | ||||
| 7314 11 | – – Of stainless steel | |||
| 7314 11 10 | – – – Endless bands, for machinery | 15 | 5,6 | — |
| 7314 11 90 | – – – Other | 15 | 5,6 | — |
| 7314 19 | – – Other | |||
| 7314 19 10 | – – – Endless bands, for machinery | 15 | 5,6 | — |
| 7314 19 90 | – – – Other | 15 | 5,6 | — |
| 7314 20 | – Grill, netting and fencing, welded at the intersection, of wire with a maximum cross-sectional dimension of 3 mm or more and having a mesh size of 100 cm2 or more | |||
| 7314 20 10 | – – Of ribbed wire | 15 | 5,6 | — |
| 7314 20 90 | – – Other | 15 | 5,6 | — |
| 7314 30 | – Other grill, netting and fencing, welded at the intersection | |||
| 7314 30 10 | – – Plated or coated with zinc | 15 | 5,6 | — |
| 7314 30 90 | – – Other | 15 | 5,6 | — |
| – Other grill, netting and fencing | ||||
| 7314 41 | – – Plated or coated with zinc | |||
| 7314 41 10 | – – – Hexagonal netting | 15 | 5,6 | — |
| 7314 41 90 | – – – Other | 15 | 5,6 | — |
| 7314 42 | – – Coated with plastics | |||
| 7314 42 10 | – – – Hexagonal netting | 15 | 5,6 | — |
| 7314 42 90 | – – – Other | 15 | 5,6 | — |
| 7314 49 00 | – – Other | 15 | 5,6 | — |
| 7314 50 00 | – Expanded metal | 15 | 4,6 | — |
| 7315 | Chain and parts thereof, of iron or steel | |||
| – Articulated link chain and parts thereof | ||||
| 7315 11 | – – Roller chain | |||
| 7315 11 10 | – – – Of a kind used for cycles and motor-cycles | 16 | 4,2 | — |
| 7315 11 90 | – – – Other | 16 | 4,2 | — |
| 7315 12 00 | – – Other chain | 16 | 4,2 | — |
| 7315 19 00 | – – Parts | 16 | 4,2 | — |
| 7315 20 00 | – Skid chain | 16 | 4,2 | — |
| – Other chain | ||||
| 7315 81 00 | – – Stud-link | 16 | 4,2 | — |
| 7315 82 | – – Other, welded link | |||
| 7315 82 10 | – – – The constituent material of which has a maximum cross-sectional dimension of 16 mm or less | 16 | 4,2 | — |
| 7315 82 90 | – – – The constituent material of which has a maximum cross-sectional dimension of more than 16 mm | 16 | 4,2 | — |
| 7315 89 00 | – – Other | 16 | 4,2 | — |
| 7315 90 00 | – Other parts | 16 | 4,2 | — |
| 7316 00 00 | Anchors, grapnels and parts thereof, of iron or steel | 18 | 5,2 | — |
| 7317 00 | Nails, tacks, drawing pins, corrugated nails, staples (other than those of heading No 8305) and similar articles, of iron or steel, whether or not with heads of other material, but excluding such articles with heads of copper | |||
| 7317 00 10 | – Drawing pins | 16 | 4,1 | — |
| – Other | ||||
| – – Cold-pressed from wire | ||||
| 7317 00 20 | – – – Nails in strips or coils | 16 | 4,1 | — |
| 7317 00 40 | – – – Nails of steel containing by weight 0,5 % or more of carbon, hardened | 16 | 4,1 | — |
| – – – Other | ||||
| 7317 00 61 | – – – – Plated or coated with zinc | 16 | 4,1 | — |
| 7317 00 69 | – – – – Other | 16 | 4,1 | — |
| 7317 00 90 | – – Other | 16 | 4,1 | — |
| 7318 | Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter-pins, washers (including spring washers) and similar articles, of iron or steel | |||
| – Threaded articles | ||||
| 7318 11 00 | – – Coach screws | 17 | 5,9 | — |
| 7318 12 | – – Other wood screws | |||
| 7318 12 10 | – – – Of stainless steel | 17 | 5,9 | — |
| 7318 12 90 | – – – Other | 17 | 5,9 | — |
| 7318 13 00 | – – Screw hooks and screw rings | 17 | 5,9 | — |
| 7318 14 | – – Self-tapping screws | |||
| 7318 14 10 | – – – Of stainless steel | 17 | 5,9 | — |
| – – – Other | ||||
| 7318 14 91 | – – – – Spaced-thread screws | 17 | 5,9 | — |
| 7318 14 99 | – – – – Other | 17 | 5,9 | — |
| 7318 15 | – – Other screws and bolts, whether or not with their nuts or washers | |||
| 7318 15 10 | – – – Screws, turned from bars, rods, profiles, or wire, of solid section, of a shank thickness not exceeding 6 mm | 17 | 5 | — |
| – – – Other | ||||
| 7318 15 20 | – – – – For fixing railway track construction material | 17 | 5,9 | — |
| – – – – Other | ||||
| – – – – – Without heads | ||||
| 7318 15 30 | – – – – – – Of stainless steel | 17 | 5,9 | — |
| – – – – – – Other, with a tensile strength | ||||
| 7318 15 41 | – – – – – – – Of less than 800 MPa | 17 | 5,9 | — |
| 7318 15 49 | – – – – – – – Of 800 MPa or more | 17 | 5,9 | — |
| – – – – – With heads | ||||
| – – – – – – Slotted and cross-recessed screws | ||||
| 7318 15 51 | – – – – – – – Of stainless steel | 17 | 5,9 | — |
| 7318 15 59 | – – – – – – – Other | 17 | 5,9 | — |
| – – – – – – Hexagon socket head screws | ||||
| 7318 15 61 | – – – – – – – Of stainless steel | 17 | 5,9 | — |
| 7318 15 69 | – – – – – – – Other | 17 | 5,9 | — |
| – – – – – – Hexagon bolts | ||||
| 7318 15 70 | – – – – – – – Of stainless steel | 17 | 5,9 | — |
| – – – – – – – Other, with a tensile strength | ||||
| 7318 15 81 | – – – – – – – – Of less than 800 MPa | 17 | 5,9 | — |
| 7318 15 89 | – – – – – – – – Of 800 MPa or more | 17 | 5,9 | — |
| 7318 15 90 | – – – – – – Other | 17 | 5,9 | — |
| 7318 16 | – – Nuts | |||
| 7318 16 10 | – – – Turned from bars, rods, profiles, or wire, of solid section, of a hole diameter not exceeding 6 mm | 17 | 5 | — |
| – – – Other | ||||
| 7318 16 30 | – – – – Of stainless steel | 17 | 5,9 | — |
| – – – – Other | ||||
| 7318 16 50 | – – – – – Self-locking nuts | 17 | 5,9 | — |
| – – – – – Other, with an inside diameter | ||||
| 7318 16 91 | – – – – – – Not exceeding 12 mm | 17 | 5,9 | — |
| 7318 16 99 | – – – – – – Exceeding 12 mm | 17 | 5,9 | — |
| 7318 19 00 | – – Other | 17 | 5,9 | — |
| – Non-threaded articles | ||||
| 7318 21 00 | – – Spring washers and other lock washers | 16 | 5,7 | — |
| 7318 22 00 | – – Other washers | 16 | 5,7 | — |
| 7318 23 00 | – – Rivets | 16 | 5,7 | — |
| 7318 24 00 | – – Cotters and cotter-pins | 16 | 5,7 | — |
| 7318 29 00 | – – Other | 16 | 5,7 | — |
| 7319 | Sewing needles, knitting needles, bodkins, crochet hooks, embroidery stilettos and similar articles, for use in the hand, of iron or steel; safety pins and other pins of iron or steel, not elsewhere specified or included | |||
| 7319 10 00 | – Sewing, darning or embroidery needles | 19 | 4,6 | — |
| 7319 20 00 | – Safety pins | 19 | 4,6 | — |
| 7319 30 00 | – Other pins | 19 | 4,6 | — |
| 7319 90 00 | – Other | 15 | 4,1 | — |
| 7320 | Springs and leaves for springs, of iron or steel | |||
| 7320 10 | – Leaf-springs and leaves therefor | |||
| – – Hot-worked | ||||
| 7320 10 11 | – – – Laminated springs and leaves therefor | 17 | 4,5 | — |
| 7320 10 19 | – – – Other | 17 | 4,5 | — |
| 7320 10 90 | – – Other | 17 | 4,5 | — |
| 7320 20 | – Helical springs | |||
| 7320 20 20 | – – Hot-worked | 17 | 4,5 | — |
| – – Other | ||||
| 7320 20 81 | – – – Coil compression springs | 17 | 4,5 | — |
| 7320 20 85 | – – – Coil tension springs | 17 | 4,5 | — |
| 7320 20 89 | – – – Other | 17 | 4,5 | — |
| 7320 90 | – Other | |||
| 7320 90 10 | – – Flat spiral springs | 17 | 4,5 | — |
| 7320 90 30 | – – Discs springs | 17 | 4,5 | — |
| 7320 90 90 | – – Other | 17 | 4,5 | — |
| 7321 | Stoves, ranges, grates, cookers (including those with subsidiary boilers for central heating), barbecues, braziers, gas-rings, plate warmers and similar non-electric domestic appliances, and parts thereof, of iron or steel | |||
| – Cooking appliances and plate warmers | ||||
| 7321 11 | – – For gas fuel or for both gas and other fuels | |||
| 7321 11 10 | – – – With oven, including separate ovens | 17 | 4,5 | p/st |
| 7321 11 90 | – – – Other | 17 | 4,5 | p/st |
| 7321 12 00 | – – For liquid fuel | 17 | 4,5 | p/st |
| 7321 13 00 | – – For solid fuel | 17 | 4,5 | p/st |
| – Other appliances | ||||
| 7321 81 | – – For gas fuel or for both gas and other fuels | |||
| 7321 81 10 | – – – With exhaust outlet | 17 | 4,5 | p/st |
| 7321 81 90 | – – – Other | 17 | 4,5 | p/st |
| 7321 82 | – – For liquid fuel | |||
| 7321 82 10 | – – – With exhaust outlet | 17 | 4,5 | p/st |
| 7321 82 90 | – – – Other | 17 | 4,5 | p/st |
| 7321 83 00 | – – For solid fuel | 17 | 4,5 | p/st |
| 7321 90 00 | – Parts | 17 | 4,5 | — |
| 7322 | Radiators for central heating, not electrically heated, and parts thereof, of iron or steel; air heaters and hot air distributors (including distributors which can also distribute fresh or conditioned air), not electrically heated, incorporating a motor-driven fan or blower, and parts thereof, of iron or steel | |||
| – Radiators and parts thereof | ||||
| 7322 11 00 | – – Of cast iron | 17 | 5,1 | — |
| 7322 19 00 | – – Other | 17 | 5,1 | — |
| 7322 90 | – Other | |||
| 7322 90 10 | – – Air heaters and hot air distributors (excluding parts thereof), for use in civil aircraft(52) | 17 | Free | — |
| 7322 90 90 | – – Other | 17 | 5,1 | — |
| 7323 | Table, kitchen or other household articles and parts thereof, of iron or steel; iron or steel wool; pot scourers and scouring or polishing pads, gloves and the like, of iron or steel | |||
| 7323 10 00 | – Iron or steel wool; pot scourers and scouring or polishing pads, gloves and the like | 17 | 5,1 | — |
| – Other | ||||
| 7323 91 00 | – – Of cast iron, not enamelled | 17 | 5,1 | — |
| 7323 92 00 | – – Of cast iron, enamelled | 17 | 5,1 | — |
| 7323 93 | – – Of stainless steel | |||
| 7323 93 10 | – – – Articles for table use | 17 | 5,1 | — |
| 7323 93 90 | – – – Other | 17 | 5,1 | — |
| 7323 94 | – – Of iron (other than cast iron) or steel, enamelled | |||
| 7323 94 10 | – – – Articles for table use | 17 | 5,1 | — |
| 7323 94 90 | – – – Other | 17 | 5,1 | — |
| 7323 99 | – – Other | |||
| 7323 99 10 | – – – Articles for table use | 17 | 5,1 | — |
| – – – Other | ||||
| 7323 99 91 | – – – – Varnished or painted | 17 | 5,1 | — |
| 7323 99 99 | – – – – Other | 17 | 5,1 | — |
| 7324 | Sanitary ware and parts thereof, of iron or steel | |||
| 7324 10 | – Sinks and wash basins, of stainless steel | |||
| 7324 10 10 | – – For use in civil aircraft(52) | 17 | Free | — |
| 7324 10 90 | – – Other | 17 | 4,6 | — |
| – Baths | ||||
| 7324 21 00 | – – Of cast iron, whether or not enamelled | 17 | 5,1 | p/st |
| 7324 29 00 | – – Other | 17 | 5,1 | p/st |
| 7324 90 | – Other, including parts | |||
| 7324 90 10 | – – Sanitary ware (excluding parts thereof), for use in civil aircraft(52) | 17 | Free | — |
| 7324 90 90 | – – Other | 17 | 5,1 | — |
| 7325 | Other cast articles of iron or steel | |||
| 7325 10 | – Of non-malleable cast iron | |||
| 7325 10 20 | – – Step irons of a kind used in sewers | 14 | 3,6 | p/st |
| 7325 10 50 | – – Surface and valve boxes | 14 | 3,6 | p/st |
| – – Other | ||||
| 7325 10 91 | – – – For sewage, water, etc., systems | 14 | 3,6 | — |
| 7325 10 99 | – – – Other | 14 | 3,6 | — |
| – Other | ||||
| 7325 91 00 | – – Grinding balls and similar articles for mills | 18 | 48 | — |
| 7325 99 | – – Other | |||
| 7325 99 10 | – – – Of malleable cast iron | 14 | 3,8 | — |
| – – – – Other | ||||
| 7325 99 91 | – – – – Container corner fittings | 18 | 48 | — |
| 7325 99 99 | – – – – Other | 18 | 4,8 | — |
| 7326 | Other articles of iron or steel | |||
| – Forged or stamped, but not further worked | ||||
| 7326 11 00 | – – Grinding balls and similar articles for mills | 18 | 4,8 | — |
| 7326 19 | – – Other | |||
| 7326 19 10 | – – – Open-die forged | 18 | 4,8 | — |
| 7326 19 90 | – – – Other | 18 | 4,8 | — |
| 7326 20 | – Articles of iron or steel wire | |||
| 7326 20 10 | – – For use in civil aircraft(52) | 18 | Free | — |
| – Other | ||||
| 7326 20 30 | – – – Small cages and aviaries | 18 | 4,8 | — |
| 7326 20 50 | – – – Wire baskets | 18 | 4,8 | — |
| 7326 20 90 | – – – Other | 18 | 4,8 | — |
| 7326 90 | – Other | |||
| 7326 90 10 | – – Snuff boxes, cigarette cases, cosmetic and powder boxes and cases, and similar pocket articles | 18 | 4,8 | — |
| 7326 90 30 | – – Ladders and steps | 18 | 4,8 | — |
| 7326 90 40 | – – Pallets and similar platforms for handling goods | 18 | 4,8 | — |
| 7326 90 50 | – – Reels for cables, piping and the like | 18 | 4,8 | — |
| 7326 90 60 | – – Non-mechanical ventilators, guttering, hooks and like articles used in the building industry | 18 | 4,8 | — |
| 7326 90 70 | – – Perforated buckets and similar articles of sheet used to filter water at the entrance to drains | 18 | 4,8 | — |
| 7326 90 80 | – – Connectors for optical fibre cables | 18 | 4,8 | — |
| – – Other articles of iron or steel | ||||
| 7326 90 91 | – – – Open-die forged | 18 | 4,8 | — |
| 7326 90 93 | – – – Closed-die forged | 18 | 4,8 | — |
| 7326 90 95 | – – – Sintered | 18 | 4,8 | — |
| 7326 90 97 | – – – Other | 18 | 4,8 | — |
CHAPTER 74
COPPER AND ARTICLES THEREOF
Note
-
- In this chapter the following expressions have the meanings hereby assigned to them:
- (a) Refined copper:
Metal containing at least 99,85 % by weight of copper;
or
Metal containing at least 97,5 % by weight of copper, provided that the content by weight of any other element does not exceed the limit specified in the following table:
Other elements
| Elements | Elements | Limiting content % by weight |
| Ag | Silver | 0,25 |
| As | Arsenic | 0,5 |
| Cd | Cadmium | 1,3 |
| Cr | Chromium | 1,4 |
| Mg | Magnesium | 0,8 |
| Pb | Lead | 1,5 |
| S | Sulphur | 0,7 |
| Sn | Tin | 0,8 |
| Te | Tellurium | 0,8 |
| Zn | Zinc | 1 |
| Zr | Zirconium | 0,3 |
| Other elements(58), each | Other elements(58), each | 0,3 |
- (b) Copper alloys:
Metallic substances other than unrefined copper in which copper predominates by weight over each of the other elements, provided that:
- (i) the content by weight of at least one of the other elements is greater than the limit specified in the foregoing table;
or
- (ii) the total content by weight of such other elements exceeds 2,5 %.
- (c) Master alloys:
Alloys containing with other elements more than 10 % by weight of copper, not usefully malleable and commonly used as an additive in the manufacture of other alloys or as de-oxidants, de-sulphurizing agents or for similar uses in the metallurgy of non-ferrous metals. However, copper phosphide (phosphor copper) containing more than 15 % by weight of phosphorus falls within heading No 2848.
- (d) Bars and rods:
Rolled, extruded, drawn or forged products, not in coils, which have a uniform solid cross-section along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons (including ‘flattened circles’ and ‘modified rectangles’, of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). Products with a rectangular (including square), triangular or polygonal cross-section may have corners rounded along their whole length. The thickness of such products which have a rectangular (including ‘modified rectangular’) cross-section exceeds one-tenth of the width. The expression also covers cast or sintered products, of the same forms and dimensions, which have been subsequently worked after production (otherwise than by simple trimming or de-scaling), provided that they have not thereby assumed the character of articles or products of other headings.
Wire-bars and billets with their ends tapered or otherwise worked simply to facilitate their entry into machines for converting them into, for example, drawing stock (wire-rod) or tubes, are however to be taken to be unwrought copper of heading No 7403.
- (e) Profiles:
Rolled, extruded, drawn, forged or formed products, coiled or not, of a uniform cross-section along their whole length, which do not conform to any of the definitions of bars, rods, wire, plates, sheets, strip, foil, tubes or pipes. The expression also covers cast or sintered products, of the same forms, which have been subsequently worked after production (otherwise than by simple trimming or de-scaling), provided that they have not thereby assumed the character of articles or products of other headings.
- (f) Wire:
Rolled, extruded or drawn products, in coils, which have a uniform solid cross-section along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons (including ‘flattened circles’ and ‘modified rectangles’, of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). Products with a rectangular (including square), triangular or polygonal cross-section may have corners rounded along their whole length. The thickness of such products which have a rectangular (including ‘modified rectangular’) cross-section exceeds one-tenth of the width.
In the case of heading No 7414, however, the term ‘wire’ applies only to products, whether or not in coils, of any cross-sectional shape, of which no cross-sectional dimension exceeds 6 mm.
- (g) Plates, sheets, strip and foil:
Flat-surfaced products (other than the unwrought products of heading No 7403), coiled or not, of solid rectangular (other than square) cross-section with or without rounded corners (including ‘modified rectangles’ of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel) of a uniform thickness, which are:
- — of rectangular (including square) shape with a thickness not exceeding one-tenth of the width,
- — of a shape other than rectangular or square, of any size, provided that they do not assume the character of articles or products of other headings.
Heading Nos 7409 and 7410 apply inter alia to plates, sheets, strip and foil with patterns (for example, grooves, ribs, chequers, tears, buttons, lozenges) and to such products which have been perforated, corrugated, polished or coated, provided that they do not thereby assume the character of articles or products of other headings.
- (h) Tubes and pipes:
Hollow products, coiled or not, which have a uniform cross-section with only one enclosed void along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons, and which have a uniform wall thickness. Products with a rectangular (including square), equilateral triangular or regular convex polygonal cross-section, which may have corners rounded along their whole length, are also to be taken to be tubes and pipes provided the inner and outer cross-sections are concentric and have the same form and orientation. Tubes and pipes of the foregoing cross-sections may be polished, coated, bent, threaded, drilled, waisted, expanded, cone-shaped or fitted with flanges, collars or rings.
Subheading note
-
- In this chapter the following expressions have the meanings hereby assigned to them:
- (a) Copper-zinc base alloys (brasses):
Alloys of copper and zinc, with or without other elements. When other elements are present:
- — zinc predominates by weight over each of such other elements,
- — any nickel content by weight is less than 5 % (see copper-nickel-zinc alloys (nickel silvers)), and
- — any tin content by weight is less than 3 % (see copper-tin alloys (bronzes)).
- (b) Copper-tin base alloys (bronzes):
Alloys of copper and tin, with or without other elements. When other elements are present, tin predominates by weight over each of such other elements, except that when the tin content is 3 % or more the zinc content by weight may exceed that of tin but must be less than 10 %.
- (c) Copper-nickel-zinc base alloys (nickel silvers):
Alloys of copper, nickel and zinc, with or without other elements. The nickel content is 5 % or more by weight (see copper-zinc alloys (brasses)).
- (d) Copper-nickel base alloys:
Alloys of copper and nickel, with or without other elements but in any case containing by weight not more than 1 % of zinc. When other elements are present, nickel predominates by weight over each of such other elements.
| CN code | Description | autonomous (%) | conventional (%) | Supplementary unit |
| (1) | (2) | (3) | (4) | (5) |
| 7401 | Copper mattes; cement copper (precipitated copper) | |||
| 7401 10 00 | – Copper mattes | Free | Free | — |
| 7401 20 00 | – Cement copper (precipitated copper) | Free | Free | — |
| 7402 00 00 | Unrefined copper; copper anodes for electrolytic refining | Free | Free | — |
| 7403 | Refined copper and copper alloys, unwrought | |||
| – Refined copper | ||||
| 7403 11 00 | – – Cathodes and sections of cathodes | Free | Free | — |
| 7403 12 00 | – – Wire-bars | Free | Free | — |
| 7403 13 00 | – – Billets | Free | Free | — |
| 7403 19 00 | – – Other | Free | Free | — |
| – Copper alloys | ||||
| 7403 21 00 | – – Copper-zinc base alloys (brass) | Free | Free | — |
| 7403 22 00 | – – Copper-tin base alloys (bronze) | Free | Free | — |
| 7403 23 00 | – – Copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver) | Free | Free | — |
| 7403 29 00 | – – Other copper alloys (other than master alloys of heading No 7405) | Free | Free | — |
| 7404 00 | Copper waste and scrap | |||
| 7404 00 10 | – Of refined copper | Free | Free | — |
| – Of copper alloys | ||||
| 7404 00 91 | – – Of copper-zinc base alloys (brass) | Free | Free | — |
| 7404 00 99 | – – Other | Free | Free | — |
| 7405 00 00 | Master alloys of copper | Free | Free | — |
| 7406 | Copper powders and flakes | |||
| 7406 10 00 | – Powders of non-lamellar structure | 3 | 1,1 | — |
| 7406 20 00 | – Powders of lamellar structure; flakes | 14 | 5 | — |
| 7407 | Copper bars, rods and profiles | |||
| 7407 10 00 | – Of refined copper | 10 | 5,8 | — |
| – Of copper alloys | ||||
| 7407 21 | – – Of copper-zinc base alloys (brass) | |||
| 7407 21 10 | – – – Bars and rods | 10 | 5,8 | — |
| 7407 21 90 | – – – Profiles | 10 | 5,8 | — |
| 7407 22 | – – Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver) | |||
| 7407 22 10 | – – – Of copper-nickel base alloys (cupro-nickel) | 10 | 5,8 | — |
| 7407 22 90 | – – – Of copper-nickel-zinc base alloys (nickel silver) | 10 | 5,8 | — |
| 7407 29 00 | – – Other | 10 | 5,8 | — |
| 7408 | Copper wire | |||
| – Of refined copper | ||||
| 7408 11 00 | – – Of which the maximum cross-sectional dimension exceeds 6 mm | 10 | 5,8 | — |
| 7408 19 | – – Other | |||
| 7408 19 10 | – – – Of which the maximum cross-sectional dimension exceeds 0,5 mm | 10 | 5,8 | — |
| 7408 19 90 | – – – Of which the maximum cross-sectional dimension does not exceed 0,5 mm | 10 | 5,8 | — |
| – Of copper alloys | ||||
| 7408 21 00 | – – Of copper-zinc base alloys (brass) | 10 | 5,8 | — |
| 7408 22 00 | – – Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver) | 10 | 5,8 | — |
| 7408 29 00 | – – Other | 10 | 5,8 | — |
| 7409 | Copper plates, sheets and strip, of a thickness exceeding 0,15 mm | |||
| – Of refined copper | ||||
| 7409 11 00 | – – In coils | 10 | 5,8 | — |
| 7409 19 00 | – – Other | 10 | 5,8 | — |
| – Of copper-zinc base alloys (brass) | ||||
| 7409 21 00 | – – In coils | 10 | 5,8 | — |
| 7409 29 00 | – – Other | 10 | 5,8 | — |
| – Of copper-tin base alloys (bronze) | ||||
| 7409 31 00 | – – In coils | 10 | 5,8 | — |
| 7409 39 00 | – – Other | 10 | 5,8 | — |
| 7409 40 | – Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver) | |||
| 7409 40 10 | – – Of copper-nickel base alloys (cupro-nickel) | 10 | 5,8 | — |
| 7409 40 90 | – – Of copper-nickel-zinc base alloys (nickel silver) | 10 | 5,8 | — |
| 7409 90 | – Of other copper alloys | |||
| 7409 90 10 | – – In coils | 10 | 5,8 | — |
| 7409 90 90 | – – Other | 10 | 5,8 | — |
| 7410 | Copper foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,15 mm | |||
| – Not backed | ||||
| 7410 11 00 | – – Of refined copper | 12 | 6,2 | — |
| 7410 12 00 | – – Of copper alloys | 12 | 6,2 | — |
| – Backed | ||||
| 7410 21 00 | – – Of refined copper | 12 | 6,2 | — |
| 7410 22 00 | – – Of copper alloys | 12 | 6,2 | — |
| 7411 | Copper tubes and pipes | |||
| 7411 10 | – Of refined copper | |||
| – – Straight, of a wall thickness | ||||
| 7411 10 11 | – – – Exceeding 0,6 mm | 13 | 5,8 | — |
| 7411 10 19 | – – – Not exceeding 0,6 mm | 13 | 5,8 | — |
| 7411 10 90 | – – Other | 13 | 5,8 | — |
| – Of copper alloys | ||||
| 7411 21 | – – Of copper-zinc base alloys (brass) | |||
| 7411 21 10 | – – – Straight | 13 | 5,8 | — |
| 7411 21 90 | – – – Other | 13 | 5,8 | — |
| 7411 22 00 | – – Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver) | 13 | 5,8 | — |
| 7411 29 | – – Other | |||
| 7411 29 10 | – – – Straight | 13 | 5,8 | — |
| 7411 29 90 | – – – Other | 13 | 5,8 | — |
| 7412 | Copper tube or pipe fittings (for example, couplings, elbows, sleeves) | |||
| 7412 10 00 | – Of refined copper | 15 | 6,2 | — |
| 7412 20 00 | – Of copper alloys | 15 | 6,2 | — |
| 7413 00 | Stranded wire, cables, plaited bands and the like, of copper, not electrically insulated | |||
| 7413 00 10 | – With fittings attached, for use in civil aircraft(52) | 13 | Free | — |
| – Other | ||||
| 7413 00 91 | – – Of refined copper | 13 | 6,2 | — |
| 7413 00 99 | – – Of copper alloys | 13 | 6,2 | — |
| 7414 | Cloth (including endless bands), grill and netting, of copper wire; expanded metal, of copper | |||
| 7414 10 00 | – Endless bands, for machinery | 12 | 6,1 | — |
| 7414 90 | – Other | |||
| 7414 90 10 | – – Woven wire cloth | 12 | 6,1 | — |
| 7414 90 90 | – – Other | 12 | 6,1 | — |
| 7415 | Nails, tacks, drawing pins, staples (other than those of heading No 8305) and similar articles, of copper or of iron or steel with heads of copper; screws, bolts, nuts, screw hooks, rivets, cotters, cotter-pins, washers (including spring washers) and similar articles, of copper | |||
| 7415 10 00 | – Nails and tacks, drawing pins, staples and similar articles | 13 | 6 | — |
| – Other articles, not threaded | ||||
| 7415 21 00 | – – Washers (including spring washers) | 13 | 4,5 | — |
| 7415 29 00 | – – Other | 13 | 4,5 | — |
| – Other threaded articles | ||||
| 7415 31 00 | – – Screws for wood | 13 | 4,5 | — |
| 7415 32 00 | – – Other screws; bolts and nuts | 13 | 4,5 | — |
| 7415 39 00 | – – Other | 13 | 4,5 | — |
| 7416 00 00 | Copper springs | 17 | 6 | — |
| 7417 00 00 | Cooking or heating apparatus of a kind used for domestic purposes, non-electric, and parts thereof, of copper | 15 | 6 | — |
| 7418 | Table, kitchen or other household articles and parts thereof, of copper; pot scourers and scouring or polishing pads, gloves and the like, of copper; sanitary ware and parts thereof, of copper | |||
| 7418 10 00 | – Table, kitchen or other household articles and parts thereof; pot scourers and scouring or polishing pads, gloves and the like | 17 | 4,5 | — |
| 7418 20 00 | – Sanitary ware and parts thereof | 17 | 4,5 | — |
| 7419 | Other articles of copper | |||
| 7419 10 00 | – Chain and parts thereof | 18 | 4,5 | — |
| – Other | ||||
| 7419 91 00 | – – Cast, moulded, stamped or forged, but not further worked | 18 | 4,5 | — |
| 7419 99 00 | – – Other | 18 | 4,5 | — |
CHAPTER 75
NICKEL AND ARTICLES THEREOF
Note
-
- In this chapter the following expressions have the meanings hereby assigned to them:
- (a) Bars and rods:
Rolled, extruded, drawn or forged products, not in coils, which have a uniform solid cross-section along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons (including ‘flattened circles’ and ‘modified rectangles’, of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). Products with a rectangular (including square), triangular or polygonal cross-section may have corners rounded along their whole length. The thickness of such products which have a rectangular (including ‘modified rectangular’) cross-section exceeds one-tenth of the width. The expression also covers cast or sintered products, of the same forms and dimensions, which have been subsequently worked after production (otherwise than by simple trimming or de-scaling), provided that they have not thereby assumed the character of articles or products of other headings.
- (b) Profiles:
Rolled, extruded, drawn, forged or formed products, coiled or not, of a uniform cross-section along their whole length, which do not conform to any of the definitions of bars, rods, wire, plates, sheets, strip, foil, tubes or pipes. The expression also covers cast or sintered products, of the same forms, which have been subsequently worked after production (otherwise than by simple trimming or de-scaling), provided that they have not thereby assumed the character of articles or products of other headings.
- (c) Wire:
Rolled, extruded or drawn products, in coils, which have a uniform solid cross-section along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons (including ‘flattened circles’ and ‘modified rectangles’, of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). Products with a rectangular (including square), triangular or polygonal cross-section may have corners rounded along their whole length. The thickness of such products which have a rectangular (including ‘modified rectangular’) cross-section exceeds one-tenth of the width.
- (d) Plates, sheets, strip and foil:
Flat-surfaced products (other than the unwrought products of heading No 7502), coiled or not, of solid rectangular (other than square) cross-section with or without rounded corners (including ‘modified rectangles’of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel) of a uniform thickness, which are:
- — of rectangular (including square) shape with a thickness not exceeding one-tenth of the width,
- — of a shape other than rectangular or square, of any size, provided that they do not assume the character of articles or products of other headings.
Heading No 7506 applies inter alia to plates, sheets, strip and foil with patterns (for example, grooves, ribs, chequers, tears, buttons, lozenges) and to such products which have been perforated, corrugated, polished or coated, provided that they do not thereby assume the character of articles or products of other headings.
- (e) Tubes and pipes:
Hollow products, coiled or not, which have a uniform cross-section with only one enclosed void along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons, and which have a uniform wall thickness. Products with a rectangular (including square), equilateral triangular, or regular convex polygonal cross-section, which may have corners rounded along their whole length, are also to be considered as tubes and pipes provided the inner and outer cross-sections are concentric and have the same form and orientation. Tubes and pipes of the foregoing cross-sections may be polished, coated, bent, threaded, drilled, waisted, expanded, cone-shaped or fitted with flanges, collars or rings.
Subheading note
-
- In this chapter the following expressions have the meanings hereby assigned to them:
- (a) Nickel, not alloyed:
Metal containing by weight at least 99 % of nickel plus cobalt, provided that:
- (i) the cobalt content by weight does not exceed 1,5 %, and
- (ii) the content by weight of any other element does not exceed the limit specified in the following table:
Other elements
| Elements | Elements | Limiting content % by weight |
| Fe | Iron | 0,5 |
| O | Oxygen | 0,4 |
| Other elements, each | Other elements, each | 0,3 |
- (b) Nickel alloys:
Metallic substances in which nickel predominates by weight over each of the other elements provided that:
- (i) the content by weight of cobalt exceeds 1,5 %,
- (ii) the content by weight of at least one of the other elements is greater than the limit specified in the foregoing table,
or
- (iii) the total content by weight of elements other than nickel plus cobalt exceeds 1 %.
| CN code | Description | autonomous (%) | conventional (%) | Supplementary unit |
| (1) | (2) | (3) | (4) | (5) |
| 7501 | Nickel mattes, nickel oxide sinters and other intermediate products of nickel metallurgy | |||
| 7501 10 00 | – Nickel mattes | Free | Free | — |
| 7501 20 00 | – Nickel oxide sinters and other intermediate products of nickel metallurgy | Free | Free | — |
| 7502 | Unwrought nickel | |||
| 7502 10 00 | – Nickel, not alloyed | Free | Free | — |
| 7502 20 00 | – Nickel alloys | Free | Free | — |
| 7503 00 | Nickel waste and scrap | |||
| 7503 00 10 | – Of nickel, not alloyed | Free | Free | — |
| 7503 00 90 | – Of nickel alloys | Free | Free | — |
| 7504 00 00 | Nickel powders and flakes | 2 | Free | — |
| 7505 | Nickel bars, rods, profiles and wire | |||
| – Bars, rods and profiles | ||||
| 7505 11 00 | – – Of nickel, not alloyed | 9 | 3,5 | — |
| 7505 12 00 | – – Of nickel alloys | 9 | 4,1 | — |
| – Wire | ||||
| 7505 21 00 | – – Of nickel, not alloyed | 9 | 3,5 | — |
| 7505 22 00 | – – Of nickel alloys | 9 | 4,1 | — |
| 7506 | Nickel plates, sheets, strip and foil | |||
| 7506 10 00 | – Of nickel, not alloyed | 10 | 3,9 | — |
| 7506 20 00 | – Of nickel alloys | 10 | 4,6 | — |
| 7507 | Nickel tubes, pipes and tube or pipe fittings (for example, couplings, elbows, sleeves) | |||
| – Tubes and pipes | ||||
| 7507 11 00 | – – Of nickel, not alloyed | 12 | 4,2 | — |
| 7507 12 00 | – – Of nickel alloys | 12 | 4,2 | — |
| 7507 20 00 | – Tube or pipe fittings | 13 | 3,5 | — |
| 7508 00 | Other articles of nickel | |||
| 7508 00 10 | – Cloth, grill, netting and fencing, of nickel wire | 16 | 3,7 | — |
| 7508 00 90 | – Other | 16 | 3,7 | — |
CHAPTER 76
ALUMINIUM AND ARTICLES THEREOF
Note
-
- In this chapter the following expressions have the meanings hereby assigned to them:
- (a) Bars and rods:
Rolled, extruded, drawn or forged products, not in coils, which have a uniform solid cross-section along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons (including ‘flattened circles’ and ‘modified rectangles’, of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). Products with a rectangular (including square), triangular or polygonal cross-section may have corners rounded along their whole length. The thickness of such products which have a rectangular (including ‘modified rectangular’) cross-section exceeds one-tenth of the width. The expression also covers cast or sintered products, of the same forms and dimensions, which have been subsequently worked after production (otherwise than by simple trimming or de-scaling), provided that they have not thereby assumed the character of articles or products of other headings;
- (b) Profiles:
Rolled, extruded, drawn, forged or formed products, coiled or not, of a uniform cross-section along their whole length, which do not conform to any of the definitions of bars, rods, wire, plates, sheets, strip, foil, tubes or pipes. The expression also covers cast or sintered products, of the same forms, which have been subsequently worked after production (otherwise than by simple trimming or de-scaling), provided that they have not thereby assumed the character of articles or products of other headings;
- (c) Wire:
Rolled, extruded or drawn products, in coils, which have a uniform solid cross-section along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons (including ‘flattened circles’ and ‘modified rectangles’, of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). Products with a rectangular (including square), triangular or polygonal cross-section may have corners rounded along their whole length. The thickness of such products which have a rectangular (including ‘modified rectangular’) cross-section exceeds one-tenth of the width;
- (d) Plates, sheets, strip and foil:
Flat-surfaced products (other than the unwrought products of heading No 7601), coiled or not, of solid rectangular (other than square) cross-section with or without rounded corners (including ‘modified rectangles’ of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel) of a uniform thickness, which are:
- — of rectangular (including square) shape with a thickness not exceeding one-tenth of the width,
- — of a shape other than rectangular or square, of any size, provided that they do not assume the character of articles or products of other headings.
Heading Nos 7606 and 7607 apply inter alia to plates, sheets, strip and foil with patterns (for example, grooves, ribs, chequers, tears, buttons, lozenges) and to such products which have been perforated, corrugated, polished or coated, provided that they do not thereby assume the character of articles or products of other headings;
- (e) Tubes and pipes:
Hollow products, coiled or not, which have a uniform cross-section with only one enclosed void along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons, and which have a uniform wall thickness. Products with a rectangular (including square), equilateral triangular or regular convex polygonal cross-section, which may have corners rounded along their whole length, are also to be considered as tubes and pipes provided the inner and outer cross-sections are concentric and have the same form and orientation. Tubes and pipes of the foregoing cross-sections may be polished, coated, bent, threaded, drilled, waisted, expanded, cone-shaped or fitted with flanges, collars or rings.
Subheading note
-
- In this chapter the following expressions have the meanings hereby assigned to them:
- (a) Aluminium, not alloyed:
Metal containing by weight at least 99 % of aluminium, provided that the content by weight of any other element does not exceed the limit specified in the following table:
Other elements
| Element | Limiting content % by weight |
| Fe + Si (iron plus silicon) | 1 |
| Other elements(59), each | 0,1(60) |
- (b) Aluminium alloys:
Metallic substances in which aluminium predominates by weight over each of the other elements, provided that:
- (i) the content by weight of at least one of the other elements or of iron plus silicon taken together is greater than the limit specified in the foregoing table;
or
- (ii) the total content by weight of such other elements exceeds 1 %.
| CN code | Description | autonomous (%) | conventional (%) | Supplementary unit |
| (1) | (2) | (3) | (4) | (5) |
| 7601 | Unwrought aluminium | |||
| 7601 10 00 | – Aluminium, not alloyed | 10 | 6 | — |
| 7601 20 | – Aluminium alloys | |||
| 7601 20 10 | – – Primary | 10 | 6 | — |
| 7601 20 90 | – – Secondary | 10 | 6 | — |
| 7602 00 | Aluminium waste and scrap | |||
| – Waste | ||||
| 7602 00 11 | – – Turnings, shavings, chips, milling waste, sawdust and filings; waste of coloured, coated or bonded sheets and foil, of a thickness (excluding any backing) not exceeding 0,2 mm | Free | 1,8 | — |
| 7602 00 19 | – – Other (including factory rejects) | 5 | 2,6 | — |
| 7602 00 90 | – Scrap | Free | Free | — |
| 7603 | Aluminium powders and flakes | |||
| 7603 10 00 | – Powders of non-lamellar structure | 10 | 5,2 | — |
| 7603 20 00 | – Powders of lamellar structure; flakes | 21 | 6 | — |
| 7604 | Aluminium bars, rods and profiles | |||
| 7604 10 | – Of aluminium, not alloyed | |||
| 7604 10 10 | – – Bars and rods | 15 | 9,5 | — |
| 7604 10 90 | – – Profiles | 15 | 9,5 | — |
| – Of aluminium alloys | ||||
| 7604 21 00 | – – Hollow profiles | 19 | 9,5 | — |
| 7604 29 | – – Other | |||
| 7604 29 10 | – – – Bars and rods | 15 | 9,5 | — |
| 7604 29 90 | – – – Profiles | 15 | 9,5 | — |
| 7605 | Aluminium wire | |||
| – Of aluminium, not alloyed | ||||
| 7605 11 00 | – – Of which the maximum cross-sectional dimension exceeds 7 mm | 15 | 9,5 | — |
| 7605 19 00 | – – Other | 15 | 9,5 | — |
| – Of aluminium alloys | ||||
| 7605 21 00 | – – Of which the maximum cross-sectional dimension exceeds 7 mm | 15 | 9,5 | — |
| 7605 29 00 | – – Other | 15 | 9,5 | — |
| 7606 | Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm | |||
| – Rectangular (including square) | ||||
| 7606 11 | – – Of aluminium, not alloyed | |||
| 7606 11 10 | – – – Painted, varnished or coated with plastics | 15 | 9,5 | — |
| – – – Other, of a thickness of | ||||
| 7606 11 91 | – – – – Less than 3 mm | 15 | 9,5 | — |
| 7606 11 93 | – – – – Not less than 3 mm but less than 6 mm | 15 | 9,5 | — |
| 7606 11 99 | – – – – Not less than 6 mm | 15 | 9,5 | — |
| 7606 12 | – – Of aluminium alloys | |||
| 7606 12 10 | – – – Strip for Venetian blinds | 15 | 9,5 | — |
| – – – Other | ||||
| 7606 12 50 | – – – – Painted, varnished or coated with plastics | 15 | 9,5 | — |
| – – – – Other, of a thickness of | ||||
| 7606 12 91 | – – – – – Less than 3 mm | 15 | 9,5 | — |
| 7606 12 93 | – – – – – Not less than 3 mm but less than 6 mm | 15 | 9,5 | — |
| 7606 12 99 | – – – – – Not less than 6 mm | 15 | 9,5 | — |
| – Other | ||||
| 7606 91 00 | – – Of aluminium, not alloyed | 15 | 9,5 | — |
| 7606 92 00 | – – Of aluminium alloys | 15 | 9,5 | — |
| 7607 | Aluminium foil (whether or not printed or backed with paper, paper-board, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm | |||
| – Not backed | ||||
| 7607 11 | – – Rolled but not further worked | |||
| 7607 11 10 | – – – Of a thickness of less than 0,021 mm | 17 | 9,5 | — |
| 7607 11 90 | – – – Of a thickness of not less than 0,021 mm but not more than 0,2 mm | 17 | 9,5 | — |
| 7607 19 | – – Other | |||
| 7607 19 10 | – – – Of a thickness of less than 0,021 mm | 17 | 9,5 | — |
| – – – Of a thickness of not less than 0,021 mm but not more than 0,2 mm | ||||
| 7607 19 91 | – – – – Self-adhesive | 17 | 9,5 | — |
| 7607 19 99 | – – – – Other | 17 | 9,5 | — |
| 7607 20 | – Backed | |||
| 7607 20 10 | – – Of a thickness (excluding any backing) of less than 0,021 mm | 17 | 10 | — |
| – – Of a thickness (excluding any backing) of not less than 0,021 mm but not more than 0,2 mm | ||||
| 7607 20 91 | – – – Self-adhesive | 17 | 9,5 | — |
| 7607 20 99 | – – – Other | 17 | 9,5 | — |
| 7608 | Aluminium tubes and pipes | |||
| 7608 10 | – Of aluminium, not alloyed | |||
| 7608 10 10 | – – With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft(52) | 19 | Free | — |
| 7608 10 90 | – – Other | 19 | 9,5 | — |
| 7608 20 | – Of aluminium alloys | |||
| 7608 20 10 | – – With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft(52) | 19 | Free | — |
| – – Other | ||||
| 7608 20 30 | – – – Welded | 19 | 9,5 | — |
| – – – Other | ||||
| 7608 20 91 | – – – – Not further worked than extruded | 19 | 9,5 | — |
| 7608 20 99 | – – – – Other | 19 | 9,5 | — |
| 7609 00 00 | Aluminium tube or pipe fittings (for example, couplings, elbows, sleeves) | 20 | 7 | — |
| 7610 | Aluminium structures (excluding prefabricated buildings of heading No 9406) and parts of structures (for example, bridges and bridge-sections, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, balustrades, pillars and columns); aluminium plates, rods, profiles, tubes and the like, prepared for use in structures | |||
| 7610 10 00 | – Doors, windows and their frames and thresholds for doors | 19 | 6,8 | — |
| 7610 90 | – Other | |||
| 7610 90 10 | – – Bridges and bridge-sections, towers and lattice masts | 19 | 7 | — |
| 7610 90 90 | – – Other | 19 | 6,8 | — |
| 7611 00 00 | Aluminium reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment | 19 | 6,8 | — |
| 7612 | Aluminium casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment | |||
| 7612 10 00 | – Collapsible tubular containers | 19 | 6,8 | — |
| 7612 90 | – Other | |||
| 7612 90 10 | – – Rigid tubular containers | 19 | 6,8 | — |
| 7612 90 20 | – – Containers of a kind used for aerosols | 19 | 6,8 | p/st |
| – – Other, with a capacity of | ||||
| 7612 90 91 | – – – 50 litres or more | 19 | 6,8 | — |
| 7612 90 98 | – – – Less than 50 litres | 19 | 6,8 | — |
| 7613 00 00 | Aluminium containers for compressed or liquefied gas | 21 | 6,8 | — |
| 7614 | Stranded wire, cables, plaited bands and the like, of aluminium, not electrically insulated | |||
| 7614 10 00 | – With steel core | 19 | 6,8 | — |
| 7614 90 00 | – Other | 19 | 6,8 | — |
| 7615 | Table, kitchen or other household articles and parts thereof, of aluminium; pot scourers and scouring or polishing pads, gloves and the like, of aluminium; sanitary ware and parts thereof, of aluminium | |||
| 7615 10 | – Table, kitchen or other household articles and parts thereof; pot scourers and scouring or polishing pads, gloves and the like | |||
| 7615 10 10 | – – Cast | 20 | 6,8 | — |
| 7615 10 90 | – – Other | 20 | 6,8 | — |
| 7615 20 00 | – Sanitary ware and parts thereof | 20 | 6,8 | — |
| 7616 | Other articles of aluminium | |||
| 7616 10 00 | – Nails, tacks, staples (other than those of heading No 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter-pins, washers and similar articles | 16 | 6,8 | — |
| 7616 90 | – Other | |||
| 7616 90 10 | – – Knitting needles and crochet hooks | 19 | 6,8 | — |
| 7616 90 30 | – – Cloth, grill, netting and fencing | 19 | 6,8 | — |
| – – Other | ||||
| 7616 90 91 | – – – Cast | 19 | 6,8 | — |
| 7616 90 99 | – – – Other | 19 | 6,8 | — |
CHAPTER 78
LEAD AND ARTICLES THEREOF
Note
-
- In this chapter the following expressions have the meanings hereby assigned to them:
- (a) Bars and rods:
Rolled, extruded, drawn or forged products, not in coils, which have a uniform solid cross-section along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons (including ‘flattened circles’ and ‘modified rectangles’, of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). Products with a rectangular (including square), triangular or polygonal cross-section may have corners rounded along their whole length. The thickness of such products which have a rectangular (including ‘modified rectangular’) cross-section exceeds one-tenth of the width. The expression also covers cast or sintered products, of the same forms and dimensions, which have been subsequently worked after production (otherwise than by simple trimming or de-scaling), provided that they have not thereby assumed the character of articles or products of other headings.
- (b) Profiles:
Rolled, extruded, drawn, forged or formed products, coiled or not, of a uniform cross-section along their whole length, which do not conform to any of the definitions of bars, rods, wire, plates, sheets, strip, foil, tubes or pipes. The expression also covers cast or sintered products, of the same forms, which have been subsequently worked after production (otherwise than by simple trimming or de-scaling), provided that they have not thereby assumed the character of articles or products of other headings.
- (c) Wire:
Rolled, extruded or drawn products, in coils, which have a uniform solid cross-section along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons (including ‘flattened circles’ and ‘modified rectangles’, of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). Products with a rectangular (including square), triangular or polygonal cross-section may have corners rounded along their whole length. The thickness of such products which have a rectangular (including ‘modified rectangular’) cross-section exceeds one-tenth of the width.
- (d) Plates, sheets, strip and foil:
Flat-surfaced products (other than the unwrought products of heading No 7801), coiled or not, of solid rectangular (other than square) cross-section with or without rounded corners (including ‘modified rectangles’1 of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel) of a uniform thickness, which are:
- — of rectangular (including square) shape with a thickness not exceeding one-tenth of the width,
- — of a shape other than rectangular or square, of any size, provided that they do not assume the character of articles or products of other headings.
Heading No 7804 applies inter alia to plates, sheets, strip and foil with patterns (for example, grooves, ribs, chequers, tears, buttons, lozenges) and to such products which have been perforated, corrugated, polished or coated, provided that they do not thereby assume the character of articles or products of other headings.
- (e) Tubes and pipes:
Reading this document does not replace reading the official text published in the Official Journal of the European Union. We assume no responsibility for any inaccuracies arising from the conversion of the original to this format.
This text is published under EUR-Lex's own terms of reuse, not a Legalize or public-domain licence.
EUR-Lex
Creative Commons Attribution 4.0 International (CC BY 4.0)
© European Union, https://eur-lex.europa.eu — Source: EUR-Lex (Publications Office of the European Union). Reused under the Creative Commons Attribution 4.0 International (CC BY 4.0) licence. Only EU legislation published in the printed Official Journal of the European Union is deemed authentic; consolidated texts are reproduced here for documentation purposes and have been reformatted to Markdown.