Council Regulation (EC) No 765/2006 of 18 May 2006 concerning restrictive measures against President Lukashenko and certain officials of Belarus

• X.A.X.005 Pumps designed to move molten metals by electromagnetic forces. Notes:
• 1. See X.D.X.005 for “software” for items controlled under this entry.
• 2. See 2E001 (“development”), 2E002 (“production”), and X.E.X.003 (“use”) for “technology” for items controlled under this entry.
• 3. Pumps for use in liquid-metal-cooled reactors are controlled by 0A001.

• X.A.X.006 “Portable electric generators” and specially designed components. Technical Note: “Portable electric generators” – The generators that are in X.A.X.006 are portable – 2 268  kg or less on wheels or transportable in a 2,5 tonnes truck without a special set up requirement.

• X.A.X.007 Specific processing equipment, other than those specified in the CML or in Regulation (EU) 2021/821, as follows (see List of Items Controlled):
• a. Bellows sealed valves;
• b. Not used.

• X.B.X.001 “Continuous flow reactors” and their “modular components”. Technical Notes: 1.

For the purposes of X.B.X.001, “continuous flow reactors” consist of plug and play systems where reactants are continuously fed into the reactor and the resultant product is collected at the outlet. 2.

For purposes of X.B.X.001, “modular components” are fluidic modules, liquid pumps, valves, packed-bed modules, mixer modules, pressure gauges, liquid-liquid separators, etc.

• X.B.X.002 Nucleic acid assemblers and synthesizers not controlled by 2B352.i, which are partly or entirely automated, and designed to generate nucleic acids greater than 50 bases.

• X.B.X.003 Automated peptide synthesizers capable to work under controlled atmosphere conditions.

• X.B.X.004 Numerical control units for machine tools and “numerically controlled” machine tools, other than those specified in the CML or in Regulation (EU) 2021/821 (see List of Items Controlled):
• a. “Numerical control” units for machine tools:
• 1. Having four interpolating axes that can be coordinated simultaneously for contouring control; or
• 1. Having two or more axes that can be coordinated simultaneously for contouring control and a minimum programmable increment better (less) than 0,001  mm;
• 1. “Numerical control” units for machine tools having two, three or four interpolating axes that can be coordinated simultaneously for contouring control, and capable of receiving directly (on-line) and processing computer-aided-design (CAD) data for internal preparation of machine instructions; or
• b. Motion control boards specially designed for machine tools and having any of the following characteristics:
• 1. Interpolation in more than four axes;
• 1. Capable of real-time processing of data to modify tool path, feed rate and spindle data, during the machining operation, by any of the following:
• a. Automatic calculation and modification of part program data for machining in two or more axes by means of measuring cycles and access to source data; or
• b. Adaptive control with more than one physical variable measured and processed by means of a computing model (strategy) to change one or more machining instructions to optimize the process; or
• 1. Capable of receiving and processing CAD data for internal preparation of machine instructions;
• c. “Numerically controlled” machine tools that, according to the manufacturer’s technical specifications, can be equipped with electronic devices for simultaneous contouring control in two or more axes and that have both of the following characteristics:
• 1. Two or more axes that can be coordinated simultaneously for contouring control; and
• 1. Positioning accuracies according to ISO 230/2 (2006), with all compensations available:
• a. Better than 15 μm along any linear axis (overall positioning) for grinding machines;
• b. Better than 15 μm along any linear axis (overall positioning) for milling machines; or
• c. Better than 15 μm along any linear axis (overall positioning) for turning machines; or
• d. Machine tools, as follows, for removing or cutting metals, ceramics or composites, that, according to the manufacturer’s technical specifications, can be equipped with electronic devices for simultaneous contouring control in two or more axes:
• 1. Machine tools for turning, grinding, milling or any combination thereof, having two or more axes that can be coordinated simultaneously for contouring control and having any of the following characteristics:
• a. One or more contouring “tilting spindles”; Note: X.B.X.004.d.1.a. applies to machine tools for grinding or milling only.
• b. “Camming” (axial displacement) in one revolution of the spindle less (better) than 0,0006  mm total indicator reading (TIR); Note: X.B.X.004.d.1.b. applies to machine tools for turning only.
• c. “Run-out” (out-of-true running) in one revolution of the spindle less (better) than 0,0006  mm total indicator reading (TIR); or
• d. The positioning accuracies, with all compensations available, are less (better) than: 0,001 ^o on any rotary axis;
• 1. Electrical discharge machines (EDM) of the wire feed type that have five or more axes that can be coordinated simultaneously for contouring control.

• X.B.X.005 Non-“numerically controlled” machine tools for generating optical quality surfaces, (see List of Items Controlled) and specially designed components therefor:
• a. Turning machines using a single point cutting tool and having all of the following characteristics:
• 1. Slide positioning accuracy less (better) than 0,0005  mm per 300 mm of travel;
• 1. Bidirectional slide positioning repeatability less (better) than 0,00025  mm per 300 mm of travel;
• 1. Spindle “run-out” and “camming” less (better) than 0,0004  mm total indicator reading (TIR);
• 1. Angular deviation of the slide movement (yaw, pitch and roll) less (better) than 2 seconds of arc, TIR, over full travel; and
• 1. Slide perpendicularity less (better) than 0,001  mm per 300 mm of travel; Technical Note: The bidirectional slide positioning repeatability (R) of an axis is the maximum value of the repeatability of positioning at any position along or around the axis determined using the procedure and under the conditions specified in part 2.11 of ISO 230/2: 1988.
• b. Fly cutting machines having all of the following characteristics:
• 1. Spindle “run-out” and “camming” less (better) than 0,0004  mm TIR; and
• 1. Angular deviation of slide movement (yaw, pitch and roll) less (better) than 2 seconds of arc, TIR, over full travel.

• X.B.X.006 Gearmaking and/or finishing machinery not controlled by 2B003 capable of producing gears to a quality level of better than AGMA 11.

• X.B.X.007 Dimensional inspection or measuring systems or equipment not controlled by 2B006 or 2B206, as follows (see List of Items Controlled):
• a. Manual dimensional inspection machines, having both of the following characteristics:
• 1. Two or more axes; and
• 1. A measurement uncertainty equal to or less (better) than (3 + L/300) μm in any axes (L measured length in mm).

• X.B.X.008 “Robots” not controlled by 2B007 or 2B207 that are capable of employing feedback information in real-time processing from one or more sensors to generate or modify programs or to generate or modify numerical program data.

- X.B.X.009 Assemblies, circuit boards or inserts specially designed for machine tools controlled by X.B.X.004, or for equipment controlled by X.B.X.006, X.B.X.007 or X.B.X.008:

• a. Spindle assemblies, consisting of spindles and bearings as a minimal assembly, with radial (“run-out”) or axial (“camming”) axis motion in one revolution of the spindle less (better) than 0,0006  mm total indicator reading (TIR);
• b. Single point diamond cutting tool inserts, having all of the following characteristics:
• 1. Flawless and chip-free cutting edge when magnified 400 times in any direction;
• 1. Cutting radius from 0,1 to 5 mm inclusive; and
• 1. Cutting radius out-of-roundness less (better) than 0,002  mm TIR.
• c. Specially designed printed circuit boards with mounted components capable of upgrading, according to the manufacturer’s specifications, “numerical control” units, machine tools or feed-back devices to or above the levels specified in X.B.X.004, X.B.X.006, X.B.X.007, X.B.X.008, or X.B.X.009. Technical Note: This entry does not control measuring interferometer systems, without closed or open loop feedback, containing a laser to measure slide movement errors of machine-tools, dimensional inspection machines or similar equipment.

- X.B.X.010 Specific processing equipment, other than those specified in the CML or in Regulation (EU) 2021/821, as follows (see List of Items Controlled):

• a. Isostatic presses, other than those specified in the CML or in Regulation (EU) 2021/821;
• b. Bellows manufacturing equipment, including hydraulic forming equipment and bellows forming dies;
• c. Laser welding machines;
• d. MIG welders;
• e. E-beam welders;
• f. Monel equipment, including valves, piping, tanks and vessels;
• g. 304 and 316 stainless steel valves, piping, tanks and vessels; Note: Fittings are considered part of piping for purposes of X.B.X.010.g.
• h. Mining and drilling equipment, as follows:
• 1. Large boring equipment capable of drilling holes greater than 61 cm in diameter;
• 1. Large earth-moving equipment used in the mining industry;
• i. Electroplating equipment designed for coating parts with nickel or aluminium;
• j. Pumps designed for industrial service and for use with an electrical motor of 5 HP or greater;
• k. Vacuum valves, piping, flanges, gaskets and related equipment specially designed for use in high-vacuum service, other than those specified in the CML or in Regulation (EU) 2021/821;
• l. Spin forming and flow forming machines, other than those specified in the CML or in Regulation (EU) 2021/821;
• m. Centrifugal multiplane balancing machines, other than those specified in the CML or in Regulation (EU) 2021/821; or
• n. Austenitic stainless steel plate, valves, piping, tanks and vessels.

• X.B.X.011 Floor-mounted fume hoods (walk-in style) with a minimum nominal width of 2,5  metres.

- X.B.X.012 Class II biosafety cabinets and glove boxes.

• X.B.X.013 Batch centrifuges with a rotor capacity of 4 litres or greater, usable with biological materials.

- X.B.X.014 Fermenters with an internal volume of 10–20 litres, usable with biological materials.

• X.B.X.015 Reaction vessels, reactors, agitators, heat exchangers, condensers, pumps (including single seal pumps), valves, storage tanks, containers, receivers, and distillation or absorption columns that meet performance parameters of the control 2B350 ([^E0065]), regardless of their materials of construction. Note: For the purpose of the control X.B.X.015, plumbing valves and storage tanks with total internal (geometric) volume less than 1 m³ (1 000 litres) designed for domestic water or gas systems are excluded.

- X.B.X.016 Conventional or turbulent air-flow clean-air rooms and self-contained fan-HEPA filter units that may be used for P3 or P4 (BSL 3, BSL 4, L3, L4) containment facilities.

• X.B.X.017 Vacuum pumps with a manufacturer’s specified maximum flow-rate greater than 1 m³/h (under standard temperature and pressure conditions), casings (pump bodies), preformed casing-liners, impellers, rotors, and jet pump nozzles designed for such pumps, in which all surfaces that come into direct contact with the chemicals being processed are made from controlled materials.

- X.B.X.018 Laboratory equipment, including parts and accessories for such equipment, for the analysis or detection, destructive or non-destructive, of chemical substances.

• X.B.X.019 Whole chlor-alkali electrolysis cells – mercury, diaphragm, and membrane.

- X.B.X.020 Titanium electrodes (including those with coatings produced from other metal oxides), specially designed for use in chlor-alkali cells.

• X.B.X.021 Nickel electrodes (including those with coatings produced from other metal oxides), specially designed for use in chlor-alkali cells.

- X.B.X.022 Bipolar titanium nickel electrodes (including those with coatings produced from other metal oxides), specially designed for use in chlor-alkali cells.

• X.B.X.023 Asbestos diaphragms specially designed for use in chlor-alkali cells.

- X.B.X.024 Fluoropolymer based diaphragms specially designed for use in chlor-alkali cells.

• X.B.X.025 Fluoropolymer based ion exchange membranes specially designed for use in chlor-alkali cells.

- X.B.X.026 Compressors specially designed to compress wet or dry chlorine, regardless of material of construction.

• X.B.X.027 Microwave reactors – Machinery, plant or laboratory equipment, whether or not electrically heated, for the treatment of materials by a process involving a change of temperature such as heating.

- X.D.X.001 “Software” specially designed or modified for the “development”, “production” or “use” of equipment controlled by X.A.X.001.

• X.D.X.002 “Software” “required” for the “development”, “production” or “use” of concealed object detection equipment controlled by X.A.X.002.

- X.D.X.003 “Software” specially designed for the “development”, “production”, or “use” of equipment controlled by X.B.X.004, X.B.X.006, or X.B.X.007, X.B.X.008, and X.B.X.009.

• X.D.X.004 Specific “software”, as follows (see List of Items Controlled):
• a. “Software” to provide adaptive control and having both of the following characteristics:
• 1. For flexible manufacturing units (FMUs); and
• 1. Capable of generating or modifying, in real-time processing, programs or data by using the signals obtained simultaneously by means of at least two detection techniques, such as:
• a. Machine vision (optical ranging);
• b. Infrared imaging;
• c. Acoustical imaging (acoustical ranging);
• d. Tactile measurement;
• e. Inertial positioning;
• f. Force measurement; and
• g. Torque measurement. Note: X.D.X.004.a does not control “software” which only provides rescheduling of functionally identical equipment within flexible manufacturing units using pre-stored part programs and a pre-stored strategy for the distribution of the part programs.
• b. Not used.

• X.D.X.005 “Software” specially designed or modified for the “development,” “production,” or “use” of items controlled by X.A.X.004 or X.A.X.005. Note: See 2E001 (“development”) for “technology” for “software” controlled under this entry.

- X.D.X.006 “Software” specially designed for the “development” or “production” of portable electric generators controlled by X.A.X.006.

• X.D.X.007 “Software” for the “development”, “production”, or “use” of CNC equipment, classified in any of the headings from 8456 to 8465 of the Common Customs Tariff, not covered in X.D.X.003.

• X.E.X.001 “Technology” “required” for the “development,” “production” or “use” of equipment controlled by X.A.X.002 or “required” for the “development” of “software” controlled by X.D.X.002. Note: See X.A.X.002 and X.D.X.002 for related commodity and “software” controls.

• X.E.X.002 “Technology” for the “use” of equipment controlled by X.B.X.004, X.B.X.006, X.B.X.007, or X.B.X.008.

• X.E.X.003 “Technology” according to the General Technology Note for the “use” of equipment controlled by X.A.X.004 or X.A.X.005.

• X.E.X.004 “Technology” for the “use” of portable electric generators controlled by X.A.X.006.

Part B

CN Code	Description
8541 10	Diodes, other than photosensitive or light-emitting diodes (LED)
8541 21	Transistors, other than photosensitive transistors with a dissipation rate of less than 1 W
8541 29	Other transistors, other than photosensitive transistors
8541 30	Thyristors, diacs and triacs (excl. photosensitive semiconductor devices)
8541 49	Photosensitive semiconductor devices (excluding Photovoltaic generators and cells)
8541 51	Other semiconductor devices: Semiconductor-based transducers
8541 59	Other semiconductor devices
8541 60	Mounted piezo-electric crystals
8541 90	Semiconductor devices: Parts

CN Code	Description
3818 00	Chemical elements doped for use in electronics, in the form of discs, wafers or similar forms; chemical compounds doped for use in electronics
8486 10	Machines and apparatus for the manufacture of boules or wafers
8486 20	Machines and apparatus for the manufacture of semiconductor devices or of electronic integrated circuits
8486 40	Machines and apparatus specified in note 11(C) to this Chapter
8534 00	Printed circuits
8537 10	Boards, panels, consoles, desks, cabinets and other bases, equipped with two or more apparatus of heading 8535 or 8536 , for electric control or the distribution of electricity, including those incorporating instruments or apparatus of Chapter 90, and numerical control apparatus, other than switching apparatus of heading 8517 , for a voltage not exceeding 1 000  V
8542 31	Processors and controllers, whether or not combined with memories, converters, logic circuits, amplifiers, clock and timing circuits, or other circuits
8542 32	Memories
8542 33	Amplifiers
8542 39	Other Electronic Integrated Circuits
8542 90	Electronic integrated circuits: Parts
8543 20	Signal generators
9027 50	Other instruments and apparatus using optical radiation (UV, visible, IR)
9030 20	Oscilloscopes and oscillographs
9030 32	Multimeters with recording device
9030 39	Instruments and apparatus for measuring or checking voltage, current, resistance or electrical power, with recording device
9030 82	Instruments and apparatus for measuring or checking semiconductor wafers or devices

CN Code	Description
8525 89	Other television cameras, digital cameras and video camera recorders
8529 90	Other parts suitable for use solely or principally with the apparatus of headings 8524 to 8528
9006 30	Cameras specially designed for underwater use, for aerial survey or for medical or surgical examination of internal organs; comparison cameras for forensic or criminological purposes
9006 91	Parts and accessories for cameras
9013 10	Telescopic sights for fitting to arms; periscopes; telescopes designed to form parts of machines, appliances, instruments or apparatus of this chapter or Section XVI
9013 80	Other optical devices, appliances and instruments
9015 10 00	Rangefinders
9025 19	Other thermometers and pyrometers, not combined with other instruments
9032 10	Thermostats

4. Other electrical/magnetic components

| CN Code | Description |

| --- | --- | | 8501 32 | DC motors and DC generators of an output exceeding 750 W but not exceeding 75 kW (excluding photovoltaic generators) | | 8504 31 | Transformers having a power handling capacity not exceeding 1 kVA (excluding liquid dielectric transformers) | | 8504 40 | Static converters | | 8505 11 | Permanent magnets and articles intended to become permanent magnets after magnetisation; of metal | | 8529 10 | Aerials and aerial reflectors of all kinds; parts suitable for use therewith | | 8532 21 | Other fixed capacitors of tantalum | | 8532 22 | Aluminium electrolytic fixed electrical capacitors (excluding power capacitors) | | 8532 24 | Ceramic dielectric multilayer capacitors | | 8533 21 | Fixed electrical resistors for a power handling capacity not exceeding 20 W (excluding heating resistors, and fixed carbon resistors) | | 8533 40 | Electrical variable resistors, including rheostats and potentiometers (excluding wirewound variable resistors and heating resistors) | | 8536 41 | Relays, for a voltage not exceeding 60 V | | 8536 49 | Relays for a voltage exceeding 60 V but not exceeding 1 000  V | | 8536 50 | Other switches | | 8536 69 | Plugs and sockets | | 8536 90 | Other apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits (for example, switches, relays, fuses, surge suppressors, plugs, sockets, lamp holders and other connectors, junction boxes), for a voltage not exceeding 1 000  V; connectors for optical fibres, optical fibre bundles or cables | | 8543 70 02 | Microwave amplifiers | | 8543 70 04 | Digital flight-data recorders | | 8543 70 30 | Aerial amplifiers | | 8548 00 | Electrical parts of machinery or apparatus, not specified or included elsewhere in Chapter 85 |

5. Machine tools, additive manufacturing equipment, and related items

CN Code	Description
8205 59 80	Hand tools, including glaziers’ diamonds, excluding household tools, and tools for masons, moulders, cement workers, plasterers and painters
8456 11	Machine tools for working any material by removal of material, operated by laser
8456 30	Operated by electrodischarge processes
8456 50	Water-jet cutting machines
8457 10	Machining centres for working metal
8458 11	Horizontal lathes, including turning centres, for removing metal, numerically controlled
8458 91	Lathes (including turning centres) for removing metal, numerically controlled (excluding horizontal lathes)
8459 61	Milling machines for metals, numerically controlled (excluding lathes and turning centres of heading 8458 , way-type unit head machines, drilling machines, boring-milling machines, boring machines, and knee-type milling machines)
8466 10	Tool holders, for any type of tool for working in the hand and for machine tools; self-opening dieheads
8466 93	Parts and accessories suitable for use solely or principally with the machines of headings 8456 to 8461 , n.e.s.
8485 20	Machines for additive manufacturing by plastics or rubber deposit
8485 30	Machines for additive manufacturing by plaster, cement, ceramics or glass deposit
8485 90	Parts of machines for additive manufacturing

CN Code	Description
2804 50 10	Boron
2829 11 00	Chlorates of sodium
2829 19 00	Other chlorates
2829 90	Perchlorates; bromates and perbromates; iodates and periodates
3912 11 00	Non-plasticised cellulose acetates, in primary forms
3912 12 00	Plasticised cellulose acetates, in primary forms
3912 39	Cellulose ethers, in primary forms (excl. carboxymethylcellulose and its salts)
4706 10	Pulps of fibres derived from recovered (waste and scrap) paper or paperboard or of other fibrous cellulosic material: Cotton linters pulp
7603 10 00	Powders of non-lamellar structure
7603 20 00	Powders of lamellar structure; flakes
8104 30 00	Magnesium raspings, turnings and granules, graded according to size; powders

CN Code	Description
8471 50	Processing units other than those of subheading 8471 41 or 8471 49 , whether or not containing in the same housing one or two of the following types of unit: storage units, input units, output units
8471 70 98	Other storage units
8471 80	Units for automatic data-processing machines (excl. processing units, input or output units and storage units)
8517 62	Machines for the reception, conversion and transmission or regeneration of voice, images or other data, including switching and routing apparatus
8517 69	Other apparatus for the transmission or reception of voice, images or other data, including apparatus for communication in a wired or wireless network
8517 79	Parts of telephone sets, telephones for cellular networks or for other wireless networks and of other apparatus for the transmission or reception of voice, images or other data, excluding aerials and aerial reflectors of all kinds and their parts
8526 91	Radio navigational aid apparatus
9014 20	Instruments and appliances for aeronautical or space navigation (other than compasses)
9014 80	Other navigational instruments and appliances

| CN Code | Description |

| --- | --- | | 2610 00 | Chromium ores and concentrates | | 2819 10 | Chromium trioxide | | 2819 90 | Other chromium oxides and hydroxides | | 2825 80 00 | Antimony oxides | | 8103 20 00 | Unwrought tantalum, including bars and rods obtained simply by sintering; powders | | 8103 30 00 | Tantalum waste and scrap | | 8103 91 00 | Tantalum crucibles | | 8103 99 | Articles of tantalum | | 8112 21 | Chromium: unwrought; powders | | 8112 22 | Chromium: Waste and scrap | | 8112 29 | Chromium: Other | | 8112 41 | Unwrought rhenium and rhenium waste, scrap and powders | | 8112 49 | Rhenium, other than unwrought, waste, scrap and powders | | 8112 92 | Unwrought niobium (‘columbium’), gallium, indium, vanadium and germanium; powders and waste and scrap of these metals | | 8112 99 | Articles of niobium (‘columbium’), gallium, indium, vanadium and germanium |

9. Machinery parts, assemblies and components

CN Code	Description
8482 10	Ball bearings
8482 20	Tapered roller bearings, including cone and tapered roller assemblies
8482 30	Spherical roller bearings
8482 40 00	Needle roller bearings, including cage and needle roller assemblies
8482 91	Balls, needles and rollers
8482 50	Other cylindrical roller bearings, including cage and roller assemblies
8483 40 30	Ball or roller screws
8484 90 00	Sets or assortments of gaskets and similar joints, dissimilar in composition, put up in pouches, envelopes or similar packings: other
9031 80 20	Other instruments, appliances and machines, for measuring or checking geometrical quantities

CN Code	Description
7017	Laboratory, hygienic or pharmaceutical glassware, whether or not graduated or calibrated
8807 30	Other parts of aeroplanes, helicopters or unmanned aircraft

ANNEX Vb

List of partner countries referred to in Articles 1bb(7), 1e(4), 1f(4), 1fc(4), 1ga(4), 1jc(13), 1s(4) and 1zb(1a)

[…]

ANNEX Vba

List of countries referred to in Articles 1v(1a), 1v(1b), 1za(2), 7(2a), 8d(1), 8g(1), and 8ga(2)

NORWAY

SWITZERLAND

THE UNITED STATES OF AMERICA

JAPAN

UNITED KINGDOM

SOUTH KOREA

AUSTRALIA

CANADA

NEW ZEALAND

LIECHTENSTEIN

ICELAND

ANNEX Vc

A. Model for supply, transfer or export notification, application and authorisation forms

(referred to in Article 1fb of this Regulation)

The export authorisation is valid in all Member States of the European Union until its expiry date.

Image omitted; see official source

Image omitted; see official source

Image omitted; see official source

Image omitted; see official source

Image omitted; see official source

B. Model for brokering services/technical assistance notification, application and authorisation forms

(referred to in Article 1fb of this Regulation)

Image omitted; see official source

Image omitted; see official source

Image omitted; see official source

C. Model for sale, supply or transfer notification, application and authorisation forms (referred to in Article 8da(1) of this Regulation)

The export authorisation is valid in all Member States of the European Union until its expiry date.

Image omitted; see official source

Image omitted; see official source

Image omitted; see official source

Image omitted; see official source

ANNEX VI

LIST OF GOODS USED FOR THE PRODUCTION OR MANUFACTURING OF TOBACCO PRODUCTS REFERRED TO IN ARTICLE 1g

Name of the good	Combined Nomenclature (CN) code [^E0066]
Filters	ex 4823 90
Papers for cigarettes	4813
Flavours for tobacco	ex 3302 90
Machinery for preparing or making up of tobacco	8478
Other knives and cutting blades, for machines or for mechanical appliances	ex 8208 90 00

https://eur-lex.europa.eu/legal-content/EN/TXT/PDF/?uri=OJ:L:2021:385:FULL&from=EN

ANNEX VII

LIST OF MINERAL PRODUCTS REFERRED TO IN ARTICLE 1h

Name of the good	Combined Nomenclature (CN) code [^E0067]
Oils and other products of the distillation of high temperature coal tar; similar products in which the weight of the aromatic constituents exceeds that of the non-aromatic constituents	2707
Petroleum oils and oils obtained from bituminous minerals (excl. crude); preparations containing >= 70% by weight of petroleum oils or of oils obtained from bituminous minerals, these oils being the basic constituents of the preparations, n.e.s.; waste oils containing mainly petroleum or bituminous minerals	2710
Petroleum gas and other gaseous hydrocarbons	2711
Petroleum jelly, paraffin wax, micro- crystalline petroleum wax, slack wax, ozokerite, lignite wax, peat wax, other mineral waxes, and similar products obtained by synthesis or by other processes, whether or not coloured	2712
Petroleum coke, petroleum bitumen and other residues of petroleum oil or of oil obtained from bituminous minerals, n.e.s.	2713
Bituminous mastics, cut-backs and other bituminous mixtures based on natural asphalt, on natural bitumen, on petroleum bitumen, on mineral tar or on mineral tar pitch	2715

https://eur-lex.europa.eu/legal-content/EN/TXT/PDF/?uri=OJ:L:2021:385:FULL&from=EN

ANNEX VIII

LIST OF POTASSIUM CHLORIDE (‘POTASH’) PRODUCTS REFERRED TO IN ARTICLE 1i

Name of the good	Combined Nomenclature (CN) code [^E0068]
Potassium chloride	3104 20
Mineral or chemical fertilisers containing the three fertilising elements nitrogen, phosphorus and potassium	3105 20 10 3105 20 90
Mineral or chemical fertilisers containing the two fertilising elements phosphorus and potassium	3105 60 00
Other fertilisers containing potassium chloride	ex 3105 90 20 ex 3105 90 80

https://eur-lex.europa.eu/legal-content/EN/TXT/PDF/?uri=OJ:L:2021:385:FULL&from=EN

ANNEX IX

LIST OF MAJOR CREDIT INSTITUTIONS REFERRED TO IN ARTICLES 1j AND 1k

Belarusbank

Belinvestbank (Belarusian Bank for Development and Reconstruction)

Belagroprombank

Bank Dabrabyt

Development Bank of the Republic of Belarus

ANNEX X

LIST OF WOOD PRODUCTS REFERRED TO IN ARTICLE 1o

| Name of the good | Combined Nomenclature (CN) code [^E0069] |

| --- | --- | | Wood and articles of wood; wood charcoal | 44 |

https://eur-lex.europa.eu/legal-content/EN/TXT/PDF/?uri=OJ:L:2021:385:FULL&from=EN

ANNEX XI

LIST OF CEMENT PRODUCTS REFERRED TO IN ARTICLE 1p

Name of the good	Combined Nomenclature (CN) code [^E0070]
Cement, incl. cement clinkers, whether or not coloured	2523
Articles of cement, concrete or artificial stone, whether or not reinforced	6810

https://eur-lex.europa.eu/legal-content/EN/TXT/PDF/?uri=OJ:L:2021:385:FULL&from=EN

ANNEX XII

LIST OF IRON AND STEEL PRODUCTS REFERRED TO IN ARTICLE 1q

Name of the good	Combined Nomenclature (CN) code [^E0071]
Iron and steel	72
Articles of iron and steel	73

[^E0071]: (¹)

https://eur-lex.europa.eu/legal-content/EN/TXT/PDF/?uri=OJ:L:2021:385:FULL&from=EN

ANNEX XIII

LIST OF RUBBER PRODUCTS REFERRED TO IN ARTICLE 1r

| Name of the good | Combined Nomenclature (CN) code [^E0072] |

| --- | --- | | New pneumatic tyres, of rubber | 4011 |

[^E0072]: (¹)

https://eur-lex.europa.eu/legal-content/EN/TXT/PDF/?uri=OJ:L:2021:385:FULL&from=EN

ANNEX XIV

LIST OF MACHINERY REFERRED TO IN ARTICLE 1s

| Name of the good | Combined Nomenclature (CN) code [^E0073] |

| --- | --- | | Nuclear reactors; fuel elements (cartridges), non-irradiated, for nuclear reactors; machinery and apparatus for isotopic separation: | 8401 | | Steam or other vapour generating boilers (other than central heating hot water boilers capable also of producing low pressure steam); superheated water boilers: | 8402 | | Auxiliary plant for use with boilers of heading 8402 or 8403 (for example, economisers, superheaters, soot removers, gas recoverers); condensers for steam or other vapour power units | 8404 | | Producer gas or water gas generators, with or without their purifiers; acetylene gas generators and similar water process gas generators, with or without their purifiers | 8405 | | Steam turbines and other vapour turbines: | 8406 | | Spark-ignition reciprocating or rotary internal combustion piston engines | 8407 | | Compression-ignition internal combustion piston engines (diesel or semidiesel engines): | 8408 | | Parts suitable for use solely or principally with the engines of heading 8407 or 8408 | 8409 | | Hydraulic turbines, water wheels, and regulators therefor | 8410 | | Other engines and motors | 8412 | | Pumps for liquids, whether or not fitted with a measuring device; liquid elevators: | 8413 | | Air-conditioning machines, comprising a motor-driven fan and elements for changing the temperature and humidity, including those machines in which the humidity cannot be separately regulated | 8415 | | Furnace burners for liquid fuel, for pulverised solid fuel or for gas; mechanical stokers, including their mechanical grates, mechanical ash dischargers and similar appliances | 8416 | | Heat pumps other than air-conditioning machines of heading 8415 | Ex 8418 | | Calendering or other rolling machines, other than for metals or glass, and cylinders therefor | 8420 | | Centrifuges, including centrifugal dryers; filtering or purifying machinery and apparatus, for liquids or gases | 8421 | | Machinery for cleaning or drying bottles or other containers; machinery for filling, closing, sealing or labelling bottles, cans, boxes, bags or other containers; machinery for capsuling bottles, jars, tubes and similar containers; other packing or wrapping machinery (including heat-shrink wrapping machinery); machinery for aerating beverages | Ex 8422 | | Weighing machinery (excluding balances of a sensitivity of 5 cg or better), including weight-operated counting or checking machines; weighing machine weights of all kinds | 8423 | | Mechanical appliances (whether or not hand-operated) for projecting, dispersing or spraying liquids or powders; fire extinguishers, whether or not charged; spray guns and similar appliances; steam or sandblasting machines and similar jet projecting machines | 8424 | | Pulley tackle and hoists other than skip hoists; winches and capstans; jacks | 8425 | | Ships' derricks; cranes, including cable cranes; mobile lifting frames, straddle carriers and works trucks fitted with a crane | 8426 | | Fork-lift trucks; other works trucks fitted with lifting or handling equipment | 8427 | | Other lifting, handling, loading or unloading machinery (for example, lifts, escalators, conveyors, teleferics | 8428 | | Self-propelled bulldozers, angledozers, graders, levellers, scrapers, mechanical shovels, excavators, shovel loaders, tamping machines and roadrollers | 8429 | | Other moving, grading, levelling, scraping, excavating, tamping, compacting, extracting or boring machinery, for earth, minerals or ores; piledrivers and pile extractors; snowploughs and snowblowers | 8430 | | Parts suitable for use solely or principally with the machinery of headings 8425 to 8430 | 8431 | | Machinery for making pulp of fibrous cellulosic material or for making or finishing paper or paperboard | 8439 | | Bookbinding machinery, including book-sewing machines | 8440 | | Other machinery for making up paper pulp, paper or paperboard, including cutting machines of all kinds | 8441 | | Machinery, apparatus and equipment (other than the machine tools of headings 8456 to 8465 ) for preparing or making plates, cylinders or other printing components; plates, cylinders and other printing components; plates, cylinders and lithographic stones, prepared for printing purposes (for example, planed, grained or polished) | 8442 | | Printing machinery used for printing by means of plates, cylinders and other printing components of heading 8442 ; other printers, copying machines and facsimile machines, whether or not combined; parts and accessories thereof | 8443 | | Machines for extruding, drawing, texturing or cutting man-made textile materials: | 8444 00 | | Machines for preparing textile fibres; spinning, doubling or twisting machines and other machinery for producing textile yarns; textile reeling or winding (including weft-winding) machines and machines for preparing textile yarns for use on the machines of heading 8446 or 8447 | 8445 | | Knitting machines, stitch-bonding machines and machines for making gimped yarn, tulle, lace, embroidery, trimmings, braid or net and machines for tufting | 8447 | | Auxiliary machinery for use with machines of heading 8444 , 8445 , 8446 or 8447 (for example, dobbies, jacquards, automatic stop motions, shuttle changing mechanisms); parts and accessories suitable for use solely or principally with the machines of this heading or of heading 8444 , 8445 , 8446 or 8447 (for example, spindles and spindle flyers, card clothing, combs, extruding nipples, shuttles, healds and heald-frames, hosiery needles) | 8448 | | Machinery for the manufacture or finishing of felt or nonwovens in the piece or in shapes, including machinery for making felt hats; blocks for making hats | 8449 00 00 | | Machinery for preparing, tanning or working hides, skins or leather or for making or repairing footwear or other articles of hides, skins or leather, other than sewing machines | 8453 | | Converters, ladles, ingot moulds and casting machines, of a kind used in metallurgy or in metal foundries | 8454 | | Metal-rolling mills and rolls therefor | 8455 | | Machining centres, unit construction machines (single station) and multi- station transfer machines, for working metal | 8457 | | Lathes (including turning centres) for removing metal | 8458 | | Parts and accessories suitable for use solely or principally with the machines of headings 8456 to 8465 , including work or tool holders, self- opening dieheads, dividing heads and other special attachments for machine tools; tool holders for any type of tool for working in the hand | 8466 | | Tools for working in the hand, pneumatic, hydraulic or with self- contained electric or non-electric motor | 8467 | | Machinery and apparatus for soldering, brazing or welding, whether or not capable of cutting, other than those of heading 8515 ; gas-operated surface tempering machines and appliances | 8468 | | Automatic data-processing machines and units thereof; magnetic or optical readers, machines for transcribing data onto data media in coded form and machines for processing such data, not elsewhere specified or included | 8471 | | Machinery for sorting, screening, separating, washing, crushing, grinding, mixing or kneading earth, stone, ores or other mineral substances, in solid (including powder or paste) form; machinery for agglomerating, shaping or moulding solid mineral fuels, ceramic paste, unhardened cements, plastering materials or other mineral products in powder or paste form; machines for forming foundry moulds of sand | 8474 | | Machines for assembling electric or electronic lamps, tubes or valves or flashbulbs, in glass envelopes; machines for manufacturing or hot working glass or glassware | 8475 | | Machinery for working rubber or plastics or for the manufacture of products from these materials, not specified or included elsewhere in this chapter | 8477 | | Machines and mechanical appliances having individual functions, not specified or included elsewhere in this chapter | 8479 | | Moulding boxes for metal foundry; mould bases; moulding patterns; moulds for metal (other than ingot moulds), metal carbides, glass, mineral materials, rubber or plastics | 8480 | | Taps, cocks, valves and similar appliances for pipes, boiler shells, tanks, vats or the like, including pressure-reducing valves and thermostatically controlled valves | 8481 | | Ball or roller bearings | 8482 | | Transmission shafts (including cam shafts and crank shafts) and cranks; bearing housings and plain shaft bearings; gears and gearing; ball or roller screws; gear boxes and other speed changers, including torque converters; flywheels and pulleys, including pulley blocks; clutches and shaft couplings (including universal joints) | 8483 | | Gaskets and similar joints of metal sheeting combined with other material or of two or more layers of metal; sets or assortments of gaskets and similar joints, dissimilar in composition, put up in pouches, envelopes or similar packings; mechanical seals | 8484 | | Electric motors and generators (excluding generating sets) | 8501 | | Electric generating sets and rotary converters | 8502 | | Parts suitable for use solely or principally with electric motors and generators, electric generating sets or rotary converters not specified elsewhere | 8503 | | Electrical transformers, static converters (for example, rectifiers) and inductors; parts thereof | 8504 | | Electromagnets (other than for medical use); permanent magnets and articles intended to become permanent magnets after magnetisation; electromagnetic or permanent magnet chucks, clamps and similar holding devices; electromagnetic couplings, clutches and brakes; electromagnetic lifting heads; parts thereof | 8505 | | Electric accumulators, incl. separators therefor, whether or not square or rectangular; parts thereof (excl. spent and those of unhardened rubber or textiles) | 8507 | | Electrical ignition or starting equipment of a kind used for spark-ignition or compression-ignition internal combustion engines (for example, ignition magnetos, magneto-dynamos, ignition coils, sparking plugs and glow plugs, starter motors); generators (for example, dynamos, alternators) and cut-outs of a kind used in conjunction with such engines; parts thereof | 8511 | | Industrial or laboratory electric furnaces and ovens (including those functioning by induction or dielectric loss); other industrial or laboratory equipment for the heat treatment of materials by induction or dielectric loss; parts thereof | 8514 | | Parts suitable for use solely or principally with the apparatus of headings 8525 to 8528 | 8529 | | Boards, panels, consoles, desks, cabinets and other bases, equipped with two or more apparatus of headings 8535 or 8536 , for electric control or the distribution of electricity, including those incorporating instruments or apparatus of Chapter 90, and numerical control cabinets (excl. switching apparatus for line telephony or line telegraphy or videophones) | 8537 | | Parts suitable for use solely or principally with the apparatus of headings 8535 , 8536 or 8537 not specified elsewhere | 8538 | | Electric filament or discharge lamps, including sealed beam lamp units and ultraviolet or infra-red lamps; arc lamps; light-emitting diode (LED) light sources; parts thereof | 8539 | | Insulated (incl. enamelled or anodised) wire, cable (incl. coaxial cable) and other insulated electric conductors, whether or not fitted with connectors; optical fibre cables, made up of individually sheathed fibres, whether or not assembled with electric conductors or fitted with connectors | 8544 | | Carbon electrodes, carbon brushes, lamp carbons, battery carbons and other articles of graphite or other carbon, with or without metal, of a kind used for electrical purposes | 8545 | | Insulating fittings for electrical machines, appliances or equipment, being fittings wholly of insulating material apart from any minor components of metal (for example, threaded sockets) incorporated during moulding solely for purposes of assembly, other than insulators of heading 8546 ; electrical conduit tubing and joints therefor, of base metal lined with insulating material | 8547 | | Waste and scrap of primary cells, primary batteries and electric accumulators; spent primary cells, spent primary batteries and spent electric accumulators; electrical parts of machinery or apparatus, not specified elsewhere in Chapter 85 | 8548 | | Confidential products under Chapter 85; goods under Chapter 85 transported by post or by parcel post (extra)/reconstituted code for statistical distribution | |

https://eur-lex.europa.eu/legal-content/EN/TXT/PDF/?uri=OJ:L:2021:385:FULL&from=EN

ANNEX XIVa

List of goods and technology as referred to in Article 1s(1a) on the prohibition of transit via Belarus

| CN code | Description |

| --- | --- | | 8407 10 | Spark-ignition reciprocating or rotary internal combustion piston engine, for aircraft | | 8409 10 | Parts suitable for use solely or principally with internal combustion piston engine for aircraft | | 8409 99 | Parts suitable for use solely or principally with compression-ignition internal combustion piston engine (diesel or semi-diesel engine), n.e.s. | | 8412 21 | Hydraulic power engines and motors, linear acting (cylinders) | | 8413 50 | Reciprocating positive displacement pumps for liquids, power-driven, n.e.s. | | 8421 23 | Oil or petrol-filters for internal combustion engines | | 8421 31 | Intake air filters for internal combustion engines | | 8425 11 | Pulley tackle and hoists other than skip hoists or hoists of a kind used for raising vehicles, powered by electric motor | | 8428 39 | Continuous-action elevators and conveyors, for goods or materials (excluding those for underground use and bucket, belt or pneumatic types) | | 8429 59 | Self-propelled mechanical shovels, excavators and shovel loaders (excluding machinery with a 360^o revolving superstructure and front-end shovel loaders) | | 8431 39 | Parts suitable for use solely or principally with the machinery of heading 8428 , (excluding parts of lifts, skip hoists or escalators), n.e.s. | | 8466 20 | Work holders for machine tools | | 8467 29 | Electromechanical tools for working in the hand, with self-contained electric motor (excluding saws and drills) | | 8471 30 | Portable automatic data-processing machines, weighing not more than 10 kg, consisting of at least a central processing unit, a keyboard and a display | | 8471 70 | Storage units for automatic data-processing machines | | 8474 39 | Machinery for mixing or kneading solid mineral substances, including those in powder or paste form (excluding concrete and mortar mixers, machines for mixing mineral substances with bitumen and calenders) | | | | | 8479 82 | Mixing, kneading, crushing, grinding, screening, sifting, homogenising, emulsifying or stirring machines | | | | | 8481 20 | Valves for oleohydraulic or pneumatic transmission | | 8482 99 | Parts of ball or roller bearings (excluding balls, needles and rollers) | | 8483 50 | Flywheels and pulleys, including pulley blocks | | 8502 20 | Generating sets with spark-ignition internal combustion piston engines | | 8507 10 | Lead-acid accumulators of a kind used for starting piston engines | | 8511 10 | Sparking plugs of a kind used for spark-ignition or compression-ignition internal combustion engines |

ANNEX XV

LIST OF LEGAL PERSONS, ENTITIES OR BODIES REFERRED TO IN ARTICLE 1zb

Name of the legal person, entity or body	Date of application
Belagroprombank	20 March 2022
Bank Dabrabyt	20 March 2022
Development Bank of the Republic of Belarus	20 March 2022
Belinvestbank (Belarusian Bank for Development and Reconstruction)	14 June 2022

ANNEX XVI

List of firearms and other arms referred to in Article 1ba

| CN Code | Description |

| --- | --- | | 9303 | Other firearms and similar devices which operate by the firing of an explosive charge | | ex 9304 | Other arms (for example, spring, air or gas guns and pistols), excluding those of heading 9307 |

ANNEX XVII

List of goods and technologies referred to in Article 1sa

CN Code	Description
88	Aircraft, spacecraft, and parts thereof
ex 2710 19 83	Hydraulic oils for the usage in vehicles of Chapter 88
ex 2710 19 99	Other lubricating oils and other oils for use in aviation
4011 30 00	New pneumatic tyres of rubber, of a kind used on aircraft
ex 6813 20 00	Brake discs and pads for use on aircraft
6813 81 00	Brake linings and pads
8411 11	Turbojets of a thrust <= 25 kn
8411 12	Turbojets of a thrust > 25 kn
8411 21	Turbopropellers of a power <= 1 100 kw
8411 22	Turbopropellers of a power > 1 100 kw
8411 91	Parts of turbojets or turbopropellers, n.e.s.
8517 71 00	Aerials and aerial reflectors of all kinds; parts suitable for use therewith
ex 8517 79 00	Other parts related to aerials
9024 10 00	Machines and appliances for testing the hardness, strength, compressibility, elasticity or other mechanical properties of materials: Machines and appliances for testing metals
9026 00 00	Instruments and apparatus for measuring or checking the flow, level, pressure or other variables of liquids or gases (for example, flow meters, level gauges, manometers, heat meters), excluding instruments and apparatus of heading 9014 , 9015 , 9028 or 9032

ANNEX XVIII

List of goods and technologies which could contribute to the enhancement of Belarusian industrial capacities referred to in Article 1bb