Regulation (EC) No 1013/2006 of the European Parliament and of the Council of 14 June 2006 on shipments of waste

• A4100Wastes from industrial pollution control devices for cleaning of industrial off-gases but excluding such wastes specified on list B

• A4110Wastes that contain, consist of or are contaminated with any of the following:

• — any congenor of polychlorinated dibenzo-furan

• — any congenor of polychlorinated dibenzo-p-dioxin

• A4120Wastes that contain, consist of or are contaminated with peroxides

• A4130Waste packages and containers containing Annex I substances in concentrations sufficient to exhibit Annex III hazard characteristics

• A4140Waste consisting of or containing off-specification or out-dated (42)  chemicals corresponding to Annex I categories and exhibiting Annex III hazard characteristics

- A4150Waste chemical substances arising from research and development or teaching activities which are not identified and/or are new and whose effects on human health and/or the environment are not known

- A4160Spent activated carbon not included on list B (note the related entry on list B, B2060)

List B (Annex IX to the Basel Convention)

B1   METAL AND METAL BEARING WASTES

• B1010Metal and metal-alloy wastes in metallic, non-dispersible form:

• — Precious metals (gold, silver, the platinum group, but not mercury)

• — Iron and steel scrap

• — Copper scrap

• — Nickel scrap

• — Aluminium scrap

• — Zinc scrap

• — Tin scrap

• — Tungsten scrap

• — Molybdenum scrap

• — Tantalum scrap

• — Magnesium scrap

• — Cobalt scrap

• — Bismuth scrap

• — Titanium scrap

• — Zirconium scrap

• — Manganese scrap

• — Germanium scrap

• — Vanadium scrap

• — Scrap of Hafnium, Indium, Niobium, Rhenium and Gallium

• — Thorium scrap

• — Rare earths scrap

• — Chromium scrap

• B1020Clean, uncontaminated metal scrap, including alloys, in bulk finished form (sheet, plate, beams, rods, etc.):

• — Antimony scrap

• — Beryllium scrap

• — Cadmium scrap

• — Lead scrap (but excluding lead-acid batteries)

• — Selenium scrap

• — Tellurium scrap

• B1030Refractory metals containing residues

• B1031Molybdenum, tungsten, titanium, tantalum, niobium and rhenium metal and metal alloy wastes in metallic dispersible form (metal powder), excluding such wastes as specified in list A under entry A1050, Galvanic sludges.

• B1040Scrap assemblies from electrical power generation not contaminated with lubricating oil, PCB or PCT to an extent to render them hazardous

• B1050Mixed non-ferrous metal, heavy fraction scrap, not containing Annex I materials in concentrations sufficient to exhibit Annex III characteristics ([^E0047])

• B1060Waste Selenium and Tellurium in metallic elemental form including powder

• B1070Waste of copper and copper alloys in dispersible form, unless they contain Annex I constituents to an extent that they exhibit Annex III characteristics

• B1080Zinc ash and residues including zinc alloys residues in dispersible form unless containing Annex I constituents in concentration such as to exhibit Annex III characteristics ([^E0048])

• B1090Waste batteries conforming to a specification, excluding those made with lead, cadmium or mercury

• B1100Metal-bearing wastes arising from melting, smelting and refining of metals:

• — Hard zinc spelter

• — Zinc-containing drosses: — Galvanising slab zinc top dross (>90 % Zn) — Galvanising slab zinc bottom dross (>92 % Zn) — Zinc die casting dross (>85 % Zn) — Hot dip galvanisers slab zinc dross (batch) (>92 % Zn) — Zinc skimmings

• — Aluminium skimmings (or skims) excluding salt slag

• — Slags from copper processing for further processing or refining not containing arsenic, lead or cadmium to an extent that they exhibit Annex III hazard characteristics

• — Wastes of refractory linings, including crucibles, originating from copper smelting

• — Slags from precious metals processing for further refining

• — Tantalum bearing tin slags with less than 0,5  % tin

• B1115Waste metal cables coated or insulated with plastics, not included in list A1190, excluding those destined for Annex IVA operations or any other disposal operations involving, at any stage, uncontrolled thermal processes, such as open-burning

• B1120Spent catalysts excluding liquids used as catalysts, containing any of:

—	Transition Metals, excluding waste catalysts (spent catalysts, liquid used catalysts or other catalysts) on list A	Scandium Vanadium Manganese Cobalt Copper Yttrium Niobium Hafnium Tungsten	Titanium Chromium Iron Nickel Zinc Zirconium Molybdenum Tantalum Rhenium
—	Lanthanides (rare earth metals):	Lanthanum Praseodymium Samarium Gadolinium Dysprosium Erbium Ytterbium	Cerium   Neodymium Europium Terbium Holmium Thulium Lutetium

• B1130Cleaned spent precious-metal-bearing catalysts

• B1140Precious-metal-bearing residues in solid form which contain traces of inorganic cyanides

• B1150Precious metals and alloy wastes (gold, silver, the platinum group, but not mercury) in a dispersible, non-liquid form with appropriate packaging and labelling

• B1160Precious-metal ash from the incineration of printed circuit boards (note the related entry on list A, A1150)

• B1170Precious-metal ash from the incineration of photographic film

• B1180Waste photographic film containing silver halides and metallic silver

• B1190Waste photographic paper containing silver halides and metallic silver

• B1200Granulated slag arising from the manufacture of iron and steel

• B1210Slag arising from the manufacture of iron and steel including slags as a source of TiO2 and Vanadium

• B1220Slag from zinc production, chemically stabilised, having a high iron content (above 20 %) and processed according to industrial specifications (e.g. DIN 4301) mainly for construction

• B1230Mill scaling arising from the manufacture of iron and steel

- B1240Copper oxide mill-scale

• B1250Waste end-of-life motor vehicles, containing neither liquids nor other hazardous components

B2   WASTES CONTAINING PRINCIPALLY INORGANIC CONSTITUENTS, WHICH MAY CONTAIN METALS AND ORGANIC MATERIALS

• B2010Wastes from mining operations in non-dispersible form:

• — Natural graphite waste

• — Slate waste, whether or not roughly trimmed or merely cut, by sawing or otherwise

• — Mica waste

• — Leucite, nepheline and nepheline syenite waste

• — Feldspar waste

• — Fluorspar waste

• — Silica wastes in solid form excluding those used in foundry operations

• B2020Glass waste in non-dispersible form:

• — Cullet and other waste and scrap of glass except for glass from cathode-ray tubes and other activated glasses

• B2030Ceramic wastes in non-dispersible form:

• — Cermet wastes and scrap (metal ceramic composites)

• — Ceramic based fibres not elsewhere specified or included

• B2040Other wastes containing principally inorganic constituents:

• — Partially refined calcium sulphate produced from flue-gas desulphurisation (FGD)

• — Waste gypsum wallboard or plasterboard arising from the demolition of buildings

• — Slag from copper production, chemically stabilised, having a high iron content (above 20 %) and processed according to industrial specifications (e.g. DIN 4301 and DIN 8201) mainly for construction and abrasive applications

• — Sulphur in solid form

• — Limestone from the production of calcium cyanamide (having a pH less than 9)

• — Sodium, potassium, calcium chlorides

• — Carborundum (silicon carbide)

• — Broken concrete

• — Lithium-Tantalum and Lithium-Niobium containing glass scraps

• B2050Coal-fired power plant fly-ash, not included on list A (note the related entry on list A, A2060)

• B2060Spent activated carbon  not containing any Annex I constituents to the extent that they exhibit Annex III characteristics, for example, carbon resulting from the treatment of potable water and processes of the food industry and vitamin production (note the related entry on list A A4160)

• B2070Calcium fluoride sludge

• B2080Waste gypsum arising from chemical industry processes not included on list A (note the related entry on list A, A2040)

• B2090Waste anode butts from steel or aluminium production made of petroleum coke or bitumen and cleaned to normal industry specifications (excluding anode butts from chlor alkali electrolyses and from metallurgical industry)

• B2100Waste hydrates of aluminium and waste alumina and residues from alumina production excluding such materials used for gas cleaning, flocculation or filtration processes

• B2110Bauxite residue (red mud) (pH moderated to less than 11,5 )

- B2120Waste acidic or basic solutions with a pH greater than 2 and less than 11,5 , which are not corrosive or otherwise hazardous (note the related entry on list A, A4090)

• B2130Bituminous material (asphalt waste) from road construction and maintenance, not containing tar ([^E0052])(note the related entry on list A A3200)

B3   WASTES CONTAINING PRINCIPALLY ORGANIC CONSTITUENTS, WHICH MAY CONTAIN METALS AND INORGANIC MATERIALS

• B3011Plastic waste (note the related entry A3210, in list A of this Part, and entry Y48, in list A of Part 3)

• — Plastic waste listed below, provided it is destined for recycling ([^E0055]) in an environmentally sound manner and almost free from contamination and other types of wastes ([^E0056]): — Plastic waste almost exclusively ([^E0057]) consisting of one non-halogenated polymer, including but not limited to the following polymers: — Polyethylene (PE) — Polypropylene (PP) — Polystyrene (PS) — Acrylonitrile butadiene styrene (ABS) — Polyethylene terephthalate (PET) — Polycarbonates (PC) — Polyethers — Plastic waste almost exclusively (49)  consisting of one cured resin or condensation product, including but not limited to the following resins: — Urea formaldehyde resins — Phenol formaldehyde resins — Melamine formaldehyde resins — Epoxy resins — Alkyd resins — Plastic waste almost exclusively (49)  consisting of one of the following fluorinated polymers: ([^E0058]) — Perfluoroethylene/propylene (FEP) — Perfluoroalkoxy alkanes: — Tetrafluoroethylene/perfluoroalkyl vinyl ether (PFA) — Tetrafluoroethylene/perfluoromethyl vinyl ether (MFA) — Polyvinylfluoride (PVF) — Polyvinylidenefluoride (PVDF)

• — Mixtures of plastic waste, consisting of polyethylene (PE), polypropylene (PP) and/or polyethylene terephthalate (PET), provided they are destined for separate recycling ([^E0059]) of each material and in an environmentally sound manner, and almost free from contamination and other types of wastes (48) .

• B3020Paper, paperboard and paper product wastes

• The following materials, provided they are not mixed with hazardous wastes:

• Waste and scrap of paper or paperboard of:

• — unbleached paper or paperboard or of corrugated paper or paperboard

• — other paper or paperboard, made mainly of bleached chemical pulp, not coloured in the mass

• — paper or paperboard made mainly of mechanical pulp (for example, newspapers, journals and similar printed matter)

• — other, including but not limited to

• B3026The following waste from the pre-treatment of composite packaging for liquids, not containing Annex I materials in concentrations sufficient to exhibit Annex III characteristics:

• — Non-separable plastic fraction

• — Non-separable plastic-aluminium fraction

• B3027Self-adhesive label laminate waste containing raw materials used in label material production

• B3030Textile wastes

• The following materials, provided they are not mixed with other wastes and are prepared to a specification:

• — Silk waste (including cocoons unsuitable for reeling, yarn waste and garnetted stock) — not carded or combed — other

• — Waste of wool or of fine or coarse animal hair, including yarn waste but excluding garnetted stock — noils of wool or of fine animal hair — other waste of wool or of fine animal hair — waste of coarse animal hair

• — Cotton waste (including yarn waste and garnetted stock) — yarn waste (including thread waste) — garnetted stock — other

• — Flax tow and waste

• — Tow and waste (including yarn waste and garnetted stock) of true hemp (Cannabis sativa L.)

• — Tow and waste (including yarn waste and garnetted stock) of jute and other textile bast fibres (excluding flax, true hemp and ramie)

• — Tow and waste (including yarn waste and garnetted stock) of sisal and other textile fibres of the genus Agave

• — Tow, noils and waste (including yarn waste and garnetted stock) of coconut

• — Tow, noils and waste (including yarn waste and garnetted stock) of abaca (Manila hemp or Musa textilis Nee)

• — Tow, noils and waste (including yarn waste and garnetted stock) of ramie and other vegetable textile fibres, not elsewhere specified or included

• — Waste (including noils, yarn waste and garnetted stock) of man-made fibres — of synthetic fibres — of artificial fibres

• — Worn clothing and other worn textile articles

• — Used rags, scrap twine, cordage, rope and cables and worn out articles of twine, cordage, rope or cables of textile — sorted — other

• B3035Waste textile floor coverings, carpets

• B3040Rubber wastes

• The following materials, provided they are not mixed with other wastes:

• — Waste and scrap of hard rubber (e.g. ebonite)

• — Other rubber wastes (excluding such wastes specified elsewhere)

• B3050Untreated cork and wood waste:

• — Wood waste and scrap, whether or not agglomerated in logs, briquettes, pellets or similar forms

• — Cork waste: crushed, granulated or ground cork

• B3060Wastes arising from agro-food industries provided it is not infectious:

• — Wine lees

• — Dried and sterilised vegetable waste, residues and byproducts, whether or not in the form of pellets, or a kind used in animal feeding, not elsewhere specified or included

• — Degras; residues resulting from the treatment of fatty substances or animal or vegetable waxes

• — Waste of bones and horn-cores, unworked, defatted, simply prepared (but not cut to shape), treated with acid or degelatinised

• — Fish waste

• — Cocoa shells, husks, skins and other cocoa waste

• — Other wastes from the agro-food industry excluding by-products which meet national and international requirements and standards for human or animal consumption

• B3065Waste edible fats and oils of animal or vegetable origin (e.g. frying oils), provided they do not exhibit an Annex III characteristic

• B3070The following wastes:

• — Waste of human hair

• — Waste straw

• — Deactivated fungus mycelium from penicillin production to be used as animal feed

• B3080Waste parings and scrap of rubber

• B3090Paring and other wastes of leather or of composition leather not suitable for the manufacture of leather articles, excluding leather sludges, not containing hexavalent chromium compounds and biocides (note the related entry on list A, A3100)

• B3100Leather dust, ash, sludges or flours not containing hexavalent chromium compounds or biocides (note the related entry on list A, A3090)

• B3110Fellmongery wastes not containing hexavalent chromium compounds or biocides or infectious substances (note the related entry on list A, A3110)

• B3120Wastes consisting of food dyes

- B3130Waste polymer ethers and waste non-hazardous monomer ethers incapable of forming peroxides

• B3140Waste pneumatic tyres, excluding those destined for Annex IVA operations

B4   WASTES WHICH MAY CONTAIN EITHER INORGANIC OR ORGANIC CONSTITUENTS

- B4010Wastes consisting mainly of water-based/latex paints, inks and hardened varnishes not containing organic solvents, heavy metals or biocides to an extent to render them hazardous (note the related entry on list A, A4070)

- B4020Wastes from production, formulation and use of resins, latex, plasticisers, glues/adhesives, not listed on list A, free of solvents and other contaminants to an extent that they do not exhibit Annex III characteristics,  e.g. water-based, or glues based on casein, starch, dextrin, cellulose ethers, polyvinyl alcohols (note the related entry on list A, A3050)

Part 2

Wastes listed in the Annex to Decision 2000/532/EC [^E0060]