LegalizeCommission Implementing Regulation (EU) 2016/1375 of 29 July 2016 amending Council Regulation (EU) No 267/2012 concerning restrictive measures against Iran
This is the act as published. Later amendments are not folded into the text below: each one is a separate act in this repository and an entry in this law's history.
| The corresponding systems, equipment and components as identified in Council Regulation (EC) No 428/2009 of 5 May 2009 setting up a Community regime for the control of exports, transfer, brokering and transit of dual-use items | The corresponding systems, equipment and components as identified in Council Regulation (EC) No 428/2009 of 5 May 2009 setting up a Community regime for the control of exports, transfer, brokering and transit of dual-use items | Missile Technology Control Regime (M.TCR): Equipment, software and technology annex | Missile Technology Control Regime (M.TCR): Equipment, software and technology annex |
|---|---|---|---|
| 9D001 | “Software” specially designed or modified for the “development” of equipment or “technology”, specified in 9A001 to 9A119, 9B or 9E003. | M3D3 | “Software” specially designed or modified for the “development” of equipment specified in 3.A.2., 3.A.3. or 3.A.4. |
| 9D002 | “Software” specially designed or modified for the “production” of equipment specified in 9A001 to 9A119 or 9B. | M2D2 | “Software” specially designed or modified for the “use” of rocket motors or engines specified in 2.A.1.c. |
| 9D004 | Other “software” as follows: a. 2D or 3D viscous “software”, validated with wind tunnel or flight test data required for detailed engine flow modelling; b. “Software” for testing aero gas turbine engines, assemblies or components, specially designed to collect, reduce and analyse data in real time and capable of feedback control, including the dynamic adjustment of test articles or test conditions, as the test is in progress; c. “Software” specially designed to control directional solidification or single-crystal material growth in equipment specified in 9B001.a. or 9B001.c.; d. Not used; e. “Software” specially designed or modified for the operation of items specified in 9A012; f. “Software” specially designed to design the internal cooling passages of aero gas turbine blades, vans and “tip shrouds”; g. “Software” having all of the following: 1. Specially designed to predict aero thermal, aeromechanical and combustion conditions in aero gas turbine engines; and 2. Theoretical modelling predictions of the aero thermal, aeromechanical and combustion conditions, which have been validated with actual aero gas turbine engine (experimental or production) performance data. | M19D1 | “Software” which coordinates the function of more than one subsystem, specially designed or modified for “use” in the systems specified in 19.A.1. or 19.A.2. |
| 9D101 | “Software” specially designed or modified for the “use” of goods specified in 9B105, 9B106, 9B116 or 9B117. | M1D1 | “Software” specially designed or modified for the “use” of “production facilities” specified in 1.B. |
| 9D101 | “Software” specially designed or modified for the “use” of goods specified in 9B105, 9B106, 9B116 or 9B117. | M2D1 | “Software” specially designed or modified for the “use” of “production facilities” specified in 2.B.1. |
| 9D101 | “Software” specially designed or modified for the “use” of goods specified in 9B105, 9B106, 9B116 or 9B117. | M3D1 | “Software” specially designed or modified for the “use” of “production facilities” and flow-forming machines specified in 3.B.1. or 3.B.3. |
| 9D101 | “Software” specially designed or modified for the “use” of goods specified in 9B105, 9B106, 9B116 or 9B117. | M12D1 | “Software” specially designed or modified for the “use” of equipment specified in 12.A.1. |
| 9D101 | “Software” specially designed or modified for the “use” of goods specified in 9B105, 9B106, 9B116 or 9B117. | M15D1 | “Software” specially designed or modified for the “use” of equipment specified in 15.B. usable for testing systems specified in 1.A., 19.A.1. or 19.A.2. or subsystems specified in 2.A. or 20.A. |
| 9D101 | “Software” specially designed or modified for the “use” of goods specified in 9B105, 9B106, 9B116 or 9B117. | M20D1 | “Software” specially designed or modified for the systems specified in 20.B.1. |
| 9D103 | “Software” specially designed for modelling, simulation or design integration of the space launch vehicles specified in 9A004, sounding rockets specified in 9A104 or “missiles”, or the subsystemsspecified in 9A005, 9A007, 9A105, 9A106.c., 9A107, 9A108.c., 9A116 or 9A119. Note: “Software” specified in 9D103 remains controlled when combined with specially designed hardware specified in 4A102. | M16D1 | “Software” specially designed for modelling, simulation, or design integration of the systems specified in 1.A. or the subsystems specified in 2.A or 20.A. Technical Note: The modelling includes in particular the aerodynamic and thermodynamic analysis of the systems. |
| 9D104 | “Software” specially designed or modified for the “use” of goods specified in 9A001, 9A005, 9A006.d., 9A006.g., 9A007.a., 9A008.d., 9A009.a., 9A010.d., 9A011, 9A101, 9A102, 9A105, 9A106.c., 9A106.d., 9A107, 9A108.c., 9A109, 9A111, 9A115.a., 9A116.d., 9A117 or 9A118. | M2D2 M2D4 M3D2 M2D5 M20D2 | “Software” specially designed or modified for the “use” of rocket motors or engines specified in 2.A.1.c. “Software” specially designed or modified for the operation or maintenance of subsystems or equipment specified in 2.A.1.b.3. “Software” specially designed or modified for the “use” of equipment specified in 3.A.1., 3.A.2., 3.A.4., 3.A.5., 3.A.6. or 3.A.9. Notes: 1. “Software” specially designed or modified for the “use” of engines specified in 3.A.1. may be exported as part of a manned aircraft or as replacement “software” therefor. 2. “Software” specially designed or modified for the “use” of propellant control systems specified in 3.A.5. may be exported as part of a satellite or as replacement “software” therefor. “Software” specially designed or modified for the operation or maintenance of subsystems in 2.A.1.e. “Software”, not specified in 2.D.2., specially designed or modified for the “use” of rocket motors or engines specified in 20.A.1.b. |
| 9D105 | “Software” which coordinates the function of more than one subsystem, other than that specified in 9D003.e., specially designed or modified for “use” in space launch vehicles specified in 9A004 or sounding rockets specified in 9A104 or ‘missiles’. Technical Note: In 9D105 ‘missile’ means complete rocket systems and unmanned aerial vehicle systems capable of a range exceeding 300 km. | M1D2 | “Software” specially designed or modified to coordinate the function of more than one subsystem in systems specified in 1.A. |
| 9D105 | “Software” which coordinates the function of more than one subsystem, other than that specified in 9D003.e., specially designed or modified for “use” in space launch vehicles specified in 9A004 or sounding rockets specified in 9A104 or ‘missiles’. Technical Note: In 9D105 ‘missile’ means complete rocket systems and unmanned aerial vehicle systems capable of a range exceeding 300 km. | M19D1 | “Software” which coordinates the function of more than one subsystem, specially designed or modified for “use” in the systems specified in 19.A.1. or 19.A.2. |
9E Technology
| The corresponding systems, equipment and components as identified in Council Regulation (EC) No 428/2009 of 5 May 2009 setting up a Community regime for the control of exports, transfer, brokering and transit of dual-use items | The corresponding systems, equipment and components as identified in Council Regulation (EC) No 428/2009 of 5 May 2009 setting up a Community regime for the control of exports, transfer, brokering and transit of dual-use items | Missile Technology Control Regime (M.TCR): Equipment, software and technology annex | Missile Technology Control Regime (M.TCR): Equipment, software and technology annex |
|---|---|---|---|
| 9E001 | “Technology” according to the General Technology Note for the “development” of equipment | M | Means specific information which is required for the “development”, “production” or “use” of a product. The information may take the form of “technical data” or “technical assistance”. |
| 9E002 | “Technology” according to the General Technology Note for the “production” of equipment materials, see 1E002.f. | M | Means specific information which is required for the “development”, “production” or “use” of a product. The information may take the form of “technical data” or “technical assistance”. |
| 9E101 | a. “Technology” according to the General Technology Note for the “development” of goods specified in 9A101, 9A102, 9A104 to 9A111, 9A112.a. or 9A115 to 9A121. b. “Technology” according to the General Technology Note for the “production” of ‘UAV’s specified in 9A012 or goods specified in 9A101, 9A102, 9A104 to 9A111, 9A112.a. or 9A115 to 9A121. Technical Note: In 9E101.b. ‘UAV’ means unmanned aerial vehicle systems capable of a range exceeding 300 km. | M | Means specific information which is required for the “development”, “production” or “use” of a product. The information may take the form of “technical data” or “technical assistance”. |
| 9E102 | “Technology” according to the General Technology Note for the “use” of space launch vehicles specified in9A004, goods specified in 9A005 to 9A011, ‘UAV’s specified in 9A012 or goods specified in 9A101, 9A102, 9A104 to 9A111, 9A112.a., 9A115 to 9A121, 9B105, 9B106, 9B115, 9B116, 9B117, 9D101 or 9D103. Technical Note: In 9E102 ‘UAV’ means unmanned aerial vehicle systems capable of a range exceeding 300 km. | M | Means specific information which is required for the “development”, “production” or “use” of a product. The information may take the form of “technical data” or “technical assistance”.’ |
ANNEX III
‘ANNEX VIIB
Graphite and raw, fabricated semi-finished metals referred to in Article 15a
HS Codes and descriptions
-
- Raw or semi-fabricated graphite
| 2504 | Natural graphite |
| 3801 | Artificial graphite; colloidal or semi-colloidal graphite; preparations based on graphite or other carbon in the form of pastes, blocks, plates or other semi-manufactures |
-
- Corrosion-resistant high-grade steel (Chromium-content > 12 %) in form of sheet, plate, tube or bar
| ex ex 72 19 | Flat-rolled products of stainless steel, of a width of 600 mm or more |
| ex ex 72 20 | Flat-rolled products of stainless steel, of a width of less than 600 mm |
| ex ex 72 21 | Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel |
| ex ex 72 22 | Other bars and rods of stainless steel; angles, shapes and sections of stainless steel |
| ex ex 72 25 | Flat-rolled products of other alloy steel, of a width of 600 mm or more |
| ex ex 72 26 | Flat-rolled products of other alloy steel, of a width of less than 600 mm |
| ex ex 72 27 | Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel |
| ex ex 72 28 | Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel |
| ex ex 73 04 | Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel |
| ex ex 73 05 | Other tubes and pipes (for example, welded, riveted or similarly closed), having circular cross-sections, the external diameter of which exceeds 406,4 mm, of iron or steel |
| ex ex 73 06 | Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel |
| ex ex 73 07 | Tube or pipe fittings (for example, couplings, elbows, sleeves), of iron or steel |
-
- Aluminium and alloys in form of sheet, plate, tube or bar
| ex ex 76 04 | Aluminium bars, rods and profiles |
| ex ex 7604 10 10 | – Of aluminium, not alloyed |
| – – Bars and rods | |
| ex ex 7604 29 10 | – Of aluminium alloys |
| – – Hollow profiles | |
| – – – Bars and rods | |
| 7606 | Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm |
| 7608 | Aluminium tubes and pipes |
| 7609 | Aluminium tube or pipe fittings (for example, couplings, elbows, sleeves) |
-
- Titanium and alloys in form of sheet, plate, tube or bar
| ex ex 8108 90 | Titanium and articles thereof, including waste and scrap |
| – Other |
-
- Nickel and alloys in form of sheet, plate, tube or bar
| ex ex 75 05 | Nickel bars, rods, profiles and wire |
| ex ex 7505 11 | Bar and Rods |
| ex ex 7505 12 | |
| 7506 | Nickel plates, sheets, strip and foil |
| ex ex 75 07 | Nickel tubes, pipes and tube or pipe fittings (for example, couplings, elbows, sleeves) |
| 7507 11 | – Tubes and pipes |
| – – Of nickel, not alloyed | |
| 7507 12 | – Tubes and pipes |
| – – Of nickel alloys | |
| 7507 20 | – Tube or pipe fittings |
Explanatory note: the metal alloys in points 2, 3, 4 and 5 are those containing a higher percentage by weight of the stated metal than of any other element.’
Reading this document does not replace reading the official text published in the Official Journal of the European Union. We assume no responsibility for any inaccuracies arising from the conversion of the original to this format.
This text is published under EUR-Lex's own terms of reuse, not a Legalize or public-domain licence.
EUR-Lex
Creative Commons Attribution 4.0 International (CC BY 4.0)
© European Union, https://eur-lex.europa.eu — Source: EUR-Lex (Publications Office of the European Union). Reused under the Creative Commons Attribution 4.0 International (CC BY 4.0) licence. Only EU legislation published in the printed Official Journal of the European Union is deemed authentic; consolidated texts are reproduced here for documentation purposes and have been reformatted to Markdown.