Legalize
Legalize / European Union / Implementing Regulation

Commission Implementing Regulation (EU) 2025/1189 of 13 June 2025 imposing provisional anti dumping duties on imports of screws without heads originating in the People’s Republic of China

Type Implementing Regulation
Publication 2025-06-16
State In force
Text As published
Department European Commission, TRADE
Source EUR-Lex
articles 4

This is the act as published. Later amendments are not folded into the text below: each one is a separate act in this repository and an entry in this law's history.

Reform history JSON API
  • (289) The absence of measures would have significant negative effects for the Union industry, as the latter would continue to endure economic injury due to sustained price pressure from dumped Chinese imports. Market share losses would accelerate, leading to further declines in sales and production. As a result, capacity utilisation, already at an unsustainable 15 % during the investigation period, will continue to drop, making operations increasingly unviable. The already loss-making situation would be further exacerbated, with severe consequences for investments and employment in the Union. The Commission therefore concluded that the imposition of provisional measures is in the interest of the Union industry.

7.2.   Interest of unrelated importers

  • (290) Twenty-six importers came forward following the initiation of the investigation. Three were selected for sampling, and of those two submitted questionnaire responses. The cooperating importers that responded to the sampling exercise imported over 90 % of their total imports of screws without heads from China. Among the sampled cooperating importers, Chinese imports accounted for more than 80 % of their total imports of the product concerned. The sampled importers were found to be profitable, and the turnover generated from the product concerned represented only 0,5 % to 2,5 % of their total business turnover.
  • (291) Given the limited share of the product in their overall business activities, the imposition of anti-dumping measures is unlikely to have a material impact on the financial stability of importers. Furthermore, importers can mitigate potential cost increases by diversifying their sourcing strategies, including exploring alternative suppliers within the Union or other third countries. The data suggested that any potential impact on importers would be minimal.

7.3.   Interest of users

  • (292) In the absence of cooperation of users the Commission was not able to assess the actual impact of the anti-dumping duties for users. However, taking into account the existence of alternative suppliers in other third countries, together with the large production capacities of the Union industry, the Commission considered that the users could continue to source screws from multiple sources of adequate quality and quantity. The Commission thus considered that in case the anti-dumping measures are imposed, the impact on the users was limited.

7.4.   Conclusion on Union interest

  • (293) On the basis of the above, the Commission concluded that there were no compelling reasons that it was not in the Union interest to impose measures on imports of screws originating in China at this stage of the investigation.

8. PROVISIONAL ANTI-DUMPING MEASURES

  • (294) On the basis of the conclusions reached by the Commission on dumping, injury, causation, level of measures and Union interest, provisional measures should be imposed to prevent further injury being caused to the Union industry by the dumped imports.
  • (295) Provisional anti-dumping measures should be imposed on imports of product originating in countryies concerned, in accordance with the lesser duty rule in Article 7(2) of the basic Regulation. The Commission compared the injury margins and the dumping margins in recital (284) above. The amount of the duties was set at the level of dumping margins for all the exporting producers, which was found to be the lower of the dumping and the injury margins.
  • (296) On the basis of the above, the provisional anti-dumping duty rates, expressed on the CIF Union border price, customs duty unpaid, should be as follows:
Company Provisional anti-dumping duty (%)
Zhejiang Junyue Standard Part Co., Ltd. 62,3
Brother Group: — Jiaxing High-enter Fasteners Co., Ltd. — Zhejiang Morgan Brother Technology Co., Ltd. — Jiaxing Brother Standard Part Co., Ltd. 63,9
Chinafar Group: — Jiaxing Chinafar Standard Parts Co., Ltd. — Jiangsu Zhe Fasteners Co., Ltd. 80,7
Other cooperating companies 67,4
All other imports originating in country concerned 80,7
  • (297) The individual company anti-dumping duty rates specified in this Regulation were established on the basis of the findings of this investigation. Therefore, they reflect the situation found during this investigation with respect to these companies. These duty rates are exclusively applicable to imports of the product concerned originating in China and produced by the named legal entities. Imports of the product concerned produced by any other company not specifically mentioned in the operative part of this Regulation, including entities related to that those specifically mentioned, should be subject to the duty rate applicable to ‘all other imports originating in country concerned’. They should not be subject to any of the individual anti-dumping duty rates.
  • (298) To minimise the risks of circumvention due to the difference in duty rates, special measures are needed to ensure the application of the individual anti-dumping duties. The application of individual anti-dumping duties is only applicable upon presentation of a valid commercial invoice to the customs authorities of the Member States. The invoice must conform to the requirements set out in Article 1(3) of this Regulation. Until such invoice is presented, imports should be subject to the anti-dumping duty applicable to ‘all other imports originating in country concerned’.
  • (299) While presentation of this invoice is necessary for the customs authorities of the Member States to apply the individual rates of anti-dumping duty to imports, it is not the only element to be taken into account by the customs authorities. Indeed, even if presented with an invoice meeting all the requirements set out in Article 1(3) of this Regulation, the customs authorities of Member States must carry out their usual checks and may, like in all other cases, require additional documents (shipping documents, etc.) for the purpose of verifying the accuracy of the particulars contained in the declaration and ensure that the subsequent application of the lower rate of duty is justified, in compliance with customs law.
  • (300) Should the exports by one of the companies benefiting from lower individual duty rates increase significantly in volume after the imposition of the measures concerned, such an increase in volume could be considered as constituting in itself a change in the pattern of trade due to the imposition of measures within the meaning of Article 13(1) of the basic Regulation. In such circumstances and provided the conditions are met an anti-circumvention investigation may be initiated. This investigation may, inter alia, examine the need for the removal of individual duty rate(s) and the consequent imposition of a country-wide duty.

9. REGISTRATION

  • (301) As mentioned in recital (3), the Commission made imports of the product concerned subject to registration. Registration took place with a view to possibly collecting duties retroactively under Article 10(4) of the basic Regulation.
  • (302) In view of the findings at provisional stage, the registration of imports should be discontinued.
  • (303) No decision on a possible retroactive application of anti-dumping measures has been taken at this stage of the proceeding.

10. INFORMATION AT PROVISIONAL STAGE

  • (304) In accordance with Article 19a of the basic Regulation, the Commission informed interested parties about the planned imposition of provisional duties. This information was also made available to the general public via DG TRADE’s website. Interested parties were given three working days to provide comments on the accuracy of the calculations specifically disclosed to them.
  • (305) No comments on the accuracy of the calculations were received.

11. FINAL PROVISIONS

  • (306) In the interests of sound administration, the Commission will invite the interested parties to submit written comments and/or to request a hearing with the Commission and/or the Hearing Officer in trade proceedings within a fixed deadline.
  • (307) The findings concerning the imposition of provisional duties are provisional and may be amended at the definitive stage of the investigation,

HAS ADOPTED THIS REGULATION:

Article 1

1.

A provisional anti-dumping duty is imposed on imports of screws and bolts, whether or not with their nuts and washers, without heads, of iron or steel other than stainless steel, regardless of tensile strength, excluding coach screws and other wood screws, screw hooks and screw rings, self-tapping screws, and screws and bolts for fixing railway track construction material, currently falling under CN codes 7318 15 42 and 7318 15 48 and originating in the People’s Republic of China.

2.

The rates of the provisional anti-dumping duty applicable to the net, free-at-Union-frontier price, before duty, of the product described in paragraph 1 and produced by the companies listed below shall be as follows:

Company Provisional anti-dumping duty (%) TARIC additional code
Zhejiang Junyue Standard Part Co., Ltd. 62,3 89ML
Brother Group: — Jiaxing High-enter Fasteners Co., Ltd. — Zhejiang Morgan Brother Technology Co., Ltd. — Jiaxing Brother Standard Part Co., Ltd. 63,9 89MM
Chinafar Group: — Jiaxing Chinafar Standard Parts Co., Ltd. — Jiangsu Zhe Fasteners Co., Ltd. 80,7 89MN
Other cooperating companies listed in Annex 67,4 See Annex
All other imports originating in country concerned 80,7 8999
3.

The application of the individual duty rates specified for the companies mentioned in paragraph 2 shall be conditional upon presentation to the Member States’ customs authorities of a valid commercial invoice, on which shall appear a declaration dated and signed by an official of the entity issuing such invoice, identified by his/her name and function, drafted as follows: ‘I, the undersigned, certify that the (volume in unit we are using) of (product concerned) sold for export to the European Union covered by this invoice was manufactured by (company name and address) (TARIC additional code) in country concerned. I declare that the information provided in this invoice is complete and correct.’ Until such invoice is presented, the duty applicable to all other imports originating in country concerned shall apply.

4.

The release for free circulation in the Union of the product referred to in paragraph 1 shall be subject to the provision of a security deposit equivalent to the amount of the provisional duty.

5.

Unless otherwise specified, the provisions in force concerning customs duties shall apply.

Article 2

1.

Interested parties shall submit their written comments on this regulation to the Commission within 15 calendar days of the date of entry into force of this Regulation.

2.

Interested parties wishing to request a hearing with the Commission shall do so within 5 calendar days of the date of entry into force of this Regulation.

3.

Interested parties wishing to request a hearing with the Hearing Officer in trade proceedings are invited to do so within 5 calendar days of the date of entry into force of this Regulation. The Hearing Officer may examine requests submitted outside this time limit and may decide whether to accept to such requests if appropriate.

Article 3

1.

Customs authorities are hereby directed to discontinue the registration of imports established in accordance with Article 1(1) of Implementing Regulation (EU) 2025/141.

2.

Data collected regarding products which entered the EU for consumption not more than 90 days prior to the date of the entry into force of this Regulation shall be kept until the entry into force of possible definitive measures, or the termination of this proceeding.

Article 4

This Regulation shall enter into force on the day following that of its publication in the Official Journal of the European Union.

This Regulation shall be binding in its entirety and directly applicable in all Member States.

Done at Brussels, 13 June 2025.

For the Commission

The President

Ursula VON DER LEYEN

5

E.g. O.M.CI. Citterio srl is specialising in double threaded screws, which are commonly known as hanger bolts (https://www.omcicitterio.it/eng/home.php).

6

Commission Implementing Regulation (EU) 2024/1666 of 6 June 2024 imposing a definitive anti-dumping duty on imports of steel ropes and cables originating in the People’s Republic of China as extended to imports of steel ropes and cables consigned from Morocco and the Republic of Korea, whether declared as originating in these countries or not, following an expiry review pursuant to Article 11(2) of Regulation (EU) 2016/1036 of the European Parliament and of the Council (OJ L, 2024/1666, 7.6.2024, ELI: http://data.europa.eu/eli/reg_impl/2024/1666/oj); Commission Implementing Regulation (EU) 2023/1444 of 11 July 2023 imposing a provisional anti-dumping duty on imports of steel bulb flats originating in the People’s Republic of China and Türkiye (OJ L 177, 12.7.2023, p. 63, ELI: http://data.europa.eu/eli/reg_impl/2023/1444/oj); Commission Implementing Regulation (EU) 2023/100 of 11 January 2023 imposing a provisional anti-dumping duty on imports of stainless steel refillable kegs originating in the People’s Republic of China (OJ L 10, 12.1.2023, p. 36, ELI: http://data.europa.eu/eli/reg_impl/2023/100/oj); Commission Implementing Regulation (EU) 2022/2068 of 26 October 2022 imposing a definitive anti-dumping duty on imports of certain cold-rolled flat steel products originating in the People’s Republic of China and the Russian Federation following an expiry review pursuant to Article 11(2) of Regulation (EU) 2016/1036 of the European Parliament and of the Council (OJ L 277, 27.10.2022, p. 149, ELI: http://data.europa.eu/eli/reg_impl/2022/2068/oj); Commission Implementing Regulation (EU) 2022/191 of 16 February 2022 imposing a definitive anti-dumping duty on imports of certain iron or steel fasteners originating in the People’s Republic of China (OJ L 36, 17.2.2022, p. 1, ELI: http://data.europa.eu/eli/reg_impl/2022/191/oj).

7

See Implementing Regulation (EU) 2024/1666, recital 76; Implementing Regulation (EU) 2023/1444, recital 66; Implementing Regulation (EU) 2023/100, recital 58; Implementing Regulation (EU) 2022/2068, recital 80; Implementing Regulation (EU) 2022/191, recital 208.

8

See Implementing Regulation (EU) 2024/1666, recital 60; Implementing Regulation (EU) 2023/1444 recital 45; Implementing Regulation (EU) 2023/100, recital 38; Implementing Regulation (EU) 2022/2068, recital 64; Implementing Regulation (EU) 2022/191, recital 192.

9

See Implementing Regulation (EU) 2024/1666, recitals 66-68; Implementing Regulation (EU) 2023/1444 recital 58; Implementing Regulation (EU) 2023/100, recital 40; Implementing Regulation (EU) 2022/2068, recital 66; Implementing Regulation (EU) 2022/191, recitals 193-194. While the right to appoint and to remove key management personnel in SOEs by the relevant State authorities, as provided for in the Chinese legislation, can be considered to reflect the corresponding ownership rights, CCP cells in enterprises, state owned and private alike, represent another important channel through which the State can interfere with business decisions. According to the PRC’s company law, a CCP organisation is to be established in every company (with at least three CCP members as specified in the CCP Constitution) and the company shall provide the necessary conditions for the activities of the party organisation. In the past, this requirement appears not to have always been followed or strictly enforced. However, since at least 2016 the CCP has reinforced its claims to control business decisions in SOEs as a matter of political principle. The CCP is also reported to exercise pressure on private companies to put ‘patriotism’ first and to follow party discipline. In 2017, it was reported that party cells existed in 70 % of some 1,86 million privately owned companies, with growing pressure for the CCP organisations to have a final say over the business decisions within their respective companies. These rules are of general application throughout the Chinese economy, across all sectors, including to the producers of the product under review and the suppliers of their inputs.

10

See Implementing Regulation (EU) 2024/1666 recitals 61-65; Implementing Regulation (EU) 2023/1444, recital 59; Implementing Regulation (EU) 2023/100, recital 43; Implementing Regulation (EU) 2022/2068, recital 68; Implementing Regulation (EU) 2022/191, recitals 195-201.

11

See Implementing Regulation (EU) 2023/1444 recital 62; Implementing Regulation (EU) 2023/100 recital 52; Implementing Regulation (EU) 2022/2068 recital 74; Implementing Regulation (EU) 2022/191, recital 202.

12

See Implementing Regulation (EU) 2024/1666, recital 72; Implementing Regulation (EU) 2023/1444, recital 45; Implementing Regulation (EU) 2023/100, recital 33; Implementing Regulation (EU) 2022/2068, recital 75; Implementing Regulation (EU) 2022/191, recital 203.

13

See Implementing Regulation (EU) 2024/1666, recital 73; Implementing Regulation (EU) 2023/1444 recital 64; Implementing Regulation (EU) 2023/100, recital 54; Implementing Regulation (EU) 2022/2068, recital 76; Implementing Regulation (EU) 2022/191, recital 204.

14

Commission staff working document SWD (2024) 91, 10 April 2024, available at: https://ec.europa.eu/transparency/documents-register/detail?ref=SWD(2024)91&lang=en.

15

Implementing Regulation (EU) 2022/191.

16

Implementing Regulation (EU) 2022/191, recital 194.

17

See: https://cn.linkedin.com/company/zhejiang-minmetals-huijin-imp.-&-exp.-co.-ltd (accessed 20 March 2025) as well as Zhejiang International Trade Group’s audit report and financial statements 2021-2023, page 1 of the notes to the financial statements https://www.shclearing.cn/xxpl/cwbg/nb/202410/t20241031_1501107.html (accessed 20 March 2025).

18

Implementing Regulation (EU) 2022/191, recital 192.

21

See: https://www.baoganggf.com/gsjj (accessed on 17 March 2025).

23

See: https://www.shougang.com.cn/sgweb/html/index.html (accessed on 17 March 2025).

25

Ibid.

26

See Section IV, Subsection 3 of the 14th FYP on Developing the Raw Materials Industry.

28

See the Hebei Province’s Three Year Action Plan on Cluster Development in the Steel Industry Chain, Chapter II, Section 3.8; available at: https://huanbao.bjx.com.cn/news/20200717/1089773.shtml (accessed on 17 March 2025).

29

Ibid, Chapter I, Section 2.

30

Ibid, Chapter I, Section 3.2.

31

See the Henan Implementation Plan for the Transformation and Upgrade of the Steel Industry during the 14th FYP, Chapter II, Section 3; available at: https://huanbao.bjx.com.cn/news/20211210/1192881.shtml (accessed on 17 March 2025).

32

Jiangsu Province’s Work Plan Steel Sector Transformation and Upgrade and Layout Optimisation 2019-2025; available at: http://www.jiangsu.gov.cn/art/2019/5/5/art_46144_8322422.html (accessed on 17 March 2025).

33

Shandong Province’s 14th FYP on the Steel Industry Development; available at: https://m.mysteel.com/21/1119/11/DFD9D26D73D90F7D_abc.html (accessed on 17 March 2025).

34

Shanxi Province’s 2020 Steel Industry Transformation and Upgrade Action Plan; available at: https://m.mysteel.com/20/0715/11/7BF7729C99CEB3EA_abc.html (accessed on 17 March 2025).

35

Zhejiang Province’s Action Plan to Foster a High Quality Development of the Steel Industry: ‘Foster enterprise mergers and reorganisation, accelerate the concentration process, reduce the number of steel smelting enterprises to approximately 10 enterprises’; available at: https://www.jiaxing.gov.cn/art/2022/4/20/art_1228922756_59529426.html (accessed on 17 March 2025).

37

See: https://www.zibchina.com/news/newsinfo.html?id=695278 (accessed on 20 March 2025).

39

See Baoshan Iron and Steel Ltd.’s 2023 Annual Report, page 41 https://static.sse.com.cn/disclosure/listedinfo/announcement/c/new/2024-04-27/600019_20240427_B5D4.pdf (accessed on 7 February 2025).

40

See: https://www.wuganggroup.cn/people/3143 (accessed on 17 March 2025).

42

See: https://www.baoganggf.com/ggry (accessed on 17 March 2025).

43

See: https://www.shougang.com.cn/sgweb/html/gsld.html (accessed on 17 March 2025).

44

See: https://www.afastener.com/association/detail-18.html (accessed on 13 May 2025).

45

See: https://www.afastener.com/association/detail-17.html (accessed on 13 May 2025).

46

See: http://www.cncma.org/article/472 (accessed on 17 March 2025).

50

Report, Part III, Chapter 14, p. 346 ff.

51

See the People's Republic of China 14th Five-Year Plan for National Economic and Social Development and Long-Range Objectives for 2035, Part III, Article VIII, available at: https://cset.georgetown.edu/publication/china-14th-five-year-plan/ (accessed on 17 March 2025).

52

See in particular Sections I and II of the 14th FYP on Developing the Raw Materials Industry.

56

See Implementing Regulation (EU) 2023/1444, recital 63; Implementing Regulation (EU) 2023/100, recital 33.

57

DS473: European Union – Anti-Dumping measures on Biodiesel from Argentina.

58

World Bank Open Data – Upper Middle Income (https://data.worldbank.org/income-level/upper-middle-income).

59

Regulation (EU) 2015/755 of the European Parliament and of the Council of 29 April 2015 on common rules for imports from certain third countries (OJ L 123, 19.5.2015, p. 33, ELI: http://data.europa.eu/eli/reg/2015/755/oj), as amended by Delegated Regulation (EU) 2017/749 (OJ L 113, 29.4.2017, p. 11, ELI: http://data.europa.eu/eli/reg_del/2017/749/oj).

60

Sanwa Iron (Thailand) Company Ltd., Thai Meira Co. Ltd., S.J. Screw Thai Company Ltd.

62

https://www.chinwell.com.my/screws/ (last consulted 24 April 2025).

63

Sanwa Iron (Thailand) Company Ltd., Thai Meira Co. Ltd.

65

BOI : The Board of Investment of Thailand (last consulted 3 April 2025).

67

Company-specific and based on respective peak & off-peak consumption, demand and service charge as set out in recitals (161) and (162).

68

Article 2(7) of the basic Regulation considers that domestic prices in those countries cannot be used for the purpose of determining normal value.

71

ILO, Labor Force Statistics database, ‘Mean weekly hours actually worked per employed person by sex and economic activity – Annual’, Thailand. https://rshiny.ilo.org/dataexplorer35/?lang=en&segment=indicator&id=HOW_TEMP_SEX_ECO_NB_A&ref_area=THA (last consulted 3 April 2025).

72

○ BOI : The Board of Investment of Thailand (last consulted 3 April 2025).

74

Ministry of Energy – Energy policy and planning office (Table 7.2.4) https://www.eppo.go.th/index.php/en/en-energystatistics/energy-economy-static (last consulted 3 April 2025).

76

Case C-319/24 P, Commission v Sinopec Chongqing SVW Chemical and others, pending.

77

Judgement of 2 October 2024, CCCME and Others v Commission, T-263/22, ECLI:EU:T:2024:663, para. 183.

78

Judgement of 2 October 2024, CCCME and Others v Commission, T-263/22, ECLI:EU:T:2024:663, para. 185.

79

Judgement of 2 October 2024, CCCME and Others v Commission, T-263/22, ECLI:EU:T:2024:663, para 188.

80

Judgement of 2 October 2024, CCCME and Others v Commission, T-263/22, ECLI:EU:T:2024:663, para. 184.

81

Labour representing on average 16 % of the cost of production over the period considered.

82

Raw materials representing on average 48 % of the cost of production over the period considered.

83

As long as the selling price per tonne was higher than the variable cost per tonne, while fixed cost covered, each additional sale brought in some profit (a positive contribution margin). Since Union producers sold a high volume that year, it helped them to gain some profit even though the average production cost per tonne was higher.

ANNEX

Chinese cooperating exporting producers not sampled

Name TARIC additional code
ANHUI GOODLINK FASTENER CO., Ltd. 89MO
CELO Suzhou Precision Fasteners Co., Ltd. 89MP
CHANGZHOU MIKI HARDWARE TECHNOLOGY CO., Ltd. 89MQ
Cixi Jinmao Fastener Co., Ltd. 89MR
CIXI NONGER HARDWARE CO., Ltd. 89MS
Eagle Metalware Co., Ltd. 89MT
EC International (Nantong) Co., Ltd. 89MU
Everbest Hardware Products Co., Ltd. 89MV
EVERGREEN (ZHEJIANG) INTELLIGENT MANUFACTURING CO., Ltd. 89MW
FASTWELL METAL PRODUCTS CO., Ltd. 89MX
Finework (Hunan) New Energy Technology Co., Ltd. 89MY
HAI YAN MACHINERY CO., Ltd. 89MZ
HAINING XINLIAN HARDWARE MACHINERY CO., Ltd. 89NA
Haining Xinxing Fasteners Co., Ltd. 89NB
Haining Zhongheng Metal Products Co., Ltd. 89NC
HAIYAN LONGCHENG STANDARD PARTS CO., Ltd. 89ND
HAIYAN BOLT CO., Ltd. 89NE
Haiyan C&F Fittings Co., Ltd. 89NF
Haiyan Jiamei Hardware Manufacturing and Tech. Co., Ltd. 89NG
HAIYAN JINNIU FASTENERS CO., Ltd. 89NH
HAIYAN LONGSHENG HARDWARE CO., Ltd. 89NI
Haiyan Wancheng Fasteners Co., Ltd. 89NJ
Haiyan Wandefu Precision Hardware Co., Ltd. 89NK
Haiyan Xingang Standard Parts Co., Ltd. 89NL
HAIYAN XINYUAN FASTENER CO., Ltd. 89NM
Haiyan Xinyuan Technology Co., Ltd. 89NN
Haiyan Xinyue Electrical Appliances Co., Ltd. 89NO
HAIYAN YINGJIE FASTENER CO., Ltd. 89NP
HAIYAN YONGJIE TECHNOLOGY CO., Ltd. 89NQ
Haiyan Yuanzhong Hardware Co., Ltd. 89NR
Handan Changfa Fastener Manufacturing Co., Ltd. 89NS
Handan City Daoning Fastener Manufacturing Co., Ltd. 89NT
HANDAN CITY JINGGONG CONSTRUCTION ANCHORING MANUFACTURE CO., Ltd. 89NU
Handan Haosheng Fastener Co., Ltd. 89NV
HANDAN HUAMING FASTENER CO., Ltd. 89NW
HANDAN MINGXIN METAL PRODUCTS CO., Ltd. 89NX
HANDAN TONGHE FASTENER MANUFACTURE CO., Ltd. 89NY
Handan Xiaojun Fastener Manufacturing Co., Ltd. 89NZ
Handan Xingbang Fastener Co., Ltd. 89OA
Handan Yaofeng Fastener Manufacturing Co., Ltd. 89OB
Handan Yongnian Hongji Machinery Parts Co., Ltd. 89OC
Handan Zhonglong Fastener Manufacturing Co., Ltd. 89OD
Hebei Chengyi Engineering Materials Co., Ltd. 89OE
HEBEI FUAO FASTENER MANUFACTURING CO., Ltd. 89OF
Hebei Goodfix Industrial Co., Ltd. 89OG
Hebei Gude Fastener Manufacturing Co., Ltd. 89OH
HEBEI YUETONG FASTENERS MANUFACTURING CO., Ltd. 89OI
Jiangsu Hengyue Hardware Co., Ltd. 89OJ
JIANGSU LIRUNYOU MACHINERY TECHNOLOGY CO., Ltd. 89OK
Jiashan Donghe Fastener Co., Ltd. 89OL
JIASHAN SANXIN FASTENER Co., Ltd. 89OM
Jiashan Tianyang Fastener Co., Ltd 89ON
JIASHAN WEIJIE HARDWARE CO., Ltd. 89OO
Jiaxing Aerotec Precision Co., Ltd. 89OP
JIAXING BROTHER UNITED FASTENER CO., Ltd. 89OQ
JIAXING CHUANGLI HARDWARE CO., Ltd. 89OR
JIAXING EXCELLENT FASTENER CO., Ltd. 89OS
JIAXING GOOD METAL TECHNOLOGY CO., Ltd. 89OT
JIAXING HONGJIAN TECHNOLOGY CO., Ltd. 89OU
JIAXING JIAWEI MACHINERY TECHNOLOGY COMPANY, Ltd. 89OV
JIAXING JINYU FASTENER FACTORY, Ltd. 89OW
Jiaxing Jiuli Precision Manufacturing Co., Ltd. 89OX
Jiaxing Julong Hardware Technology Co., Ltd. 89OY
JIAXING KINFAST HARDWARE CO., Ltd. 89OZ
JIAXING LONGFIX FASTENERS CO., Ltd. 89PA
JIAXING PAIYOU METAL PRODUCT CO., Ltd. 89PB
JIAXING RISEN HARDWARE CO., Ltd. 89PC
JIAXING SUNFAST METAL CO., Ltd. 89PD
JIAXING YIDA NEW MATERIAL TECHNOLOGY CO., Ltd. 89PE
Jinan Star Fastener Co., Ltd. 89PF
JOYSTART AUTOMOTIVE PARTS CO., Ltd. 89PG
Langxi Longwei Metal Technology Co., Ltd. 89PH
Lianyungang Jinyu Hardware Co., Ltd. 89PI
LIANYUNGANG PINGXIN FASTENER COMPANY LIMITED 89PJ
Lianyungang Xincheng hardware Co., Ltd. 89PK
LYG Dragonscrew Co., Ltd. 89PL
MIANXUAN FASTENERS CO., Ltd. 89PM
NEDSCHROEF FASTENERS (KUNSHAN) CO., Ltd. 89PN
Ningbo Da Zhi Machine Technology CO., Ltd. 89PO
Ningbo Dongxin High-Strength Nut Co., Ltd. 89PP
NINGBO EXACT FASTENERS CO., Ltd. 89PQ
Ningbo Jinding Fastening Piece CO., Ltd. 89PR
NINGBO LEMNA PRODUCT TECHNOLOGY CO., Ltd. 89PS
Ningbo Sardis Hardware Products Co., Ltd. 89PT
NINGBO XINGSHENG OIL PIPE FITTINGS MANUFACTURE CO, Ltd. 89PU
NINGBO YINZHOU HAIYUN METAL PRODUCTS CO., Ltd. 89PV
Ningbo Zhenghai Yongding Fastener Co., Ltd. 89PW
NINGBO ZHENHAI DINGLI FASTENER SCREW CO., Ltd. 89PX
Ningbo Zhongjiang High Strength Bolts Co., Ltd. 89PY
OK TECH CO., Ltd. 89PZ
PINGHU DRAGON FASTENER CO., Ltd. 89QA
PINGHU ZHAPU NUT FACTORY, Ltd. 89QB
QIFENG PRECISION INDUSTRY SCI-TECH CORP. 89QC
Qingdao Super Star Tools Co., Ltd. 89QD
QINGDAO VANKU INDUSTRY GROUP 89QE
QINGDAO XINHUA HARDWARE PRODUCTS CO., Ltd. 89QF
SHANGHAI FIRM METAL CO., Ltd. 89QG
Shanghai Kingpluse Industry Co., Ltd. 89QH
SHANGHAI MOREGOOD HARDWARE CO., Ltd. 89QI
Shanghai Moutain Industries Co., Ltd. 89QJ
SHANGHAI ROMAX HARDWARE CO., Ltd. 89QK
SHANGRAO CITY YIWEN FASTENER CO., LIMITED 89QL
Suzhou YNK Fastener Co., Ltd. 89QM
T&Y Hardware Industry Co., Ltd. 89QN
TAISHAN DONYI HARDWARE CO., Ltd. 89QO
TANDL INDUSTRY CO., Ltd. 89QP
Xingtai Mindu Industrial Co. Ltd. 89QQ
Yongnian Country Tianbang Fasteners Co., Ltd. 89QR
Yuyao Alfirste Hardware Co., Ltd. 89QS
Zhejiang Cooper Turner Beck Green Energy Co., Ltd. 89QT
ZHEJIANG DONGHE FASTENER CO., Ltd. 89QU
Zhejiang Donghe Machinery Technology Corporation Limited 89QV
ZHEJIANG EXCELLENT INDUSTRIES CO., Ltd. 89QW
Zhejiang Haixun Precision Technology Co., Ltd. 89QX
ZHEJIANG HYSTRON AUTO PARTS CO., Ltd. 89QY
ZHEJIANG NEW SHENGDA FASTENER CO., Ltd. 89QZ
ZHESHANG DEVELOPMENT HUASENER(ZHEJIANG) HARDWARE TECHNOLOGY CO., Ltd. 89RA

ELI: http://data.europa.eu/eli/reg_impl/2025/1189/oj

ISSN 1977-0677 (electronic edition)

Reading this document does not replace reading the official text published in the Official Journal of the European Union. We assume no responsibility for any inaccuracies arising from the conversion of the original to this format.

This text is published under EUR-Lex's own terms of reuse, not a Legalize or public-domain licence. EUR-Lex
Creative Commons Attribution 4.0 International (CC BY 4.0)
© European Union, https://eur-lex.europa.eu — Source: EUR-Lex (Publications Office of the European Union). Reused under the Creative Commons Attribution 4.0 International (CC BY 4.0) licence. Only EU legislation published in the printed Official Journal of the European Union is deemed authentic; consolidated texts are reproduced here for documentation purposes and have been reformatted to Markdown.