LegalizeCommission Implementing Regulation (EU) 2025/1926 of 22 September 2025 amending Annex I to Council Regulation (EEC) No 2658/87 on the tariff and statistical nomenclature and on the Common Customs Tariff
This is the act as published. Later amendments are not folded into the text below: each one is a separate act in this repository and an entry in this law's history.
| CN code | Description | Conventional rate of duty (%) | Supplementary unit |
|---|---|---|---|
| 1 | 2 | 3 | 4 |
| 7301 | Sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements; welded angles, shapes and sections, of iron or steel: | ||
| 7301 10 00 | – Sheet piling | Free | — |
| 7301 20 00 | – Angles, shapes and sections | Free | — |
| 7302 | Railway or tramway track construction material of iron or steel, the following: rails, check-rails and rack rails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers (cross-ties), fish-plates, chairs, chair wedges, sole plates (base plates), rail clips, bedplates, ties and other material specialised for jointing or fixing rails: | ||
| 7302 10 | – Rails: | ||
| 7302 10 10 | – – Current-conducting, with parts of non-ferrous metal | Free | — |
| – – Other: | |||
| – – – New: | |||
| – – – – Vignole rails: | |||
| 7302 10 22 | – – – – – Of a weight per metre of 36 kg or more | Free | — |
| 7302 10 28 | – – – – – Of a weight per metre of less than 36 kg | Free | — |
| 7302 10 40 | – – – – Grooved rails | Free | — |
| 7302 10 50 | – – – – Other | Free | — |
| 7302 10 90 | – – – Used | Free | — |
| 7302 30 00 | – Switch blades, crossing frogs, point rods and other crossing pieces | 2,7 | — |
| 7302 40 00 | – Fish-plates and sole plates | Free | — |
| 7302 90 00 | – Other | Free | — |
| 7303 00 | Tubes, pipes and hollow profiles, of cast iron: | ||
| 7303 00 10 | – Tubes and pipes of a kind used in pressure systems | 3,2 | — |
| 7303 00 90 | – Other | 3,2 | — |
| 7304 | Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel: | ||
| – Line pipe of a kind used for oil or gas pipelines: | |||
| 7304 11 00 | – – Of stainless steel | Free | — |
| 7304 19 | – – Other: | ||
| 7304 19 10 | – – – Of an external diameter not exceeding 168,3 mm | Free | — |
| 7304 19 30 | – – – Of an external diameter exceeding 168,3 mm but not exceeding 406,4 mm | Free | — |
| 7304 19 90 | – – – Of an external diameter exceeding 406,4 mm | Free | — |
| – Casing, tubing and drill pipe, of a kind used in drilling for oil or gas: | |||
| 7304 22 00 | – – Drill pipe of stainless steel | Free | — |
| 7304 23 00 | – – Other drill pipe | Free | — |
| 7304 24 00 | – – Other, of stainless steel | Free | — |
| 7304 29 | – – Other: | ||
| 7304 29 10 | – – – Of an external diameter not exceeding 168,3 mm | Free | — |
| 7304 29 30 | – – – Of an external diameter exceeding 168,3 mm but not exceeding 406,4 mm | Free | — |
| 7304 29 90 | – – – Of an external diameter exceeding 406,4 mm | Free | — |
| – Other, of circular cross-section, of iron or non-alloy steel: | |||
| 7304 31 | – – Cold-drawn or cold-rolled (cold-reduced): | ||
| 7304 31 20 | – – – Precision tubes | Free | — |
| 7304 31 80 | – – – Other | Free | — |
| 7304 39 | – – Other: | ||
| 7304 39 50 | – – – Threaded or threadable tubes (gas pipe) | Free | — |
| – – – Other, of an external diameter: | |||
| 7304 39 82 | – – – – Not exceeding 168,3 mm | Free | — |
| 7304 39 83 | – – – – Exceeding 168,3 mm but not exceeding 406,4 mm | Free | — |
| 7304 39 88 | – – – – Exceeding 406,4 mm | Free | — |
| – Other, of circular cross-section, of stainless steel: | |||
| 7304 41 00 | – – Cold-drawn or cold-rolled (cold-reduced) | Free | — |
| 7304 49 | – – Other: | ||
| 7304 49 83 | – – – Of an external diameter not exceeding 168,3 mm | Free | — |
| 7304 49 85 | – – – Of an external diameter exceeding 168,3 mm but not exceeding 406,4 mm | Free | — |
| 7304 49 89 | – – – Of an external diameter exceeding 406,4 mm | Free | — |
| – Other, of circular cross-section, of other alloy steel: | |||
| 7304 51 | – – Cold-drawn or cold-rolled (cold-reduced): | ||
| 7304 51 10 | – – – Straight and of uniform wall thickness, of alloy steel containing by weight not less than 0,9 % but not more than 1,15 % of carbon, not less than 0,5 % but not more than 2 % of chromium and, if present, not more than 0,5 % of molybdenum | Free | — |
| – – – Other: | |||
| 7304 51 81 | – – – – Precision tubes | Free | — |
| 7304 51 89 | – – – – Other | Free | — |
| 7304 59 | – – Other: | ||
| 7304 59 30 | – – – Straight and of uniform wall thickness, of alloy steel containing by weight not less than 0,9 % but not more than 1,15 % of carbon, not less than 0,5 % but not more than 2 % of chromium and, if present, not more than 0,5 % of molybdenum | Free | — |
| – – – Other: | |||
| 7304 59 82 | – – – – Of an external diameter not exceeding 168,3 mm | Free | — |
| 7304 59 83 | – – – – Of an external diameter exceeding 168,3 mm but not exceeding 406,4 mm | Free | — |
| 7304 59 89 | – – – – Of an external diameter exceeding 406,4 mm | Free | — |
| 7304 90 00 | – Other | Free | — |
| 7305 | Other tubes and pipes (for example, welded, riveted or similarly closed), having circular cross-sections, the external diameter of which exceeds 406,4 mm, of iron or steel: | ||
| – Line pipe of a kind used for oil or gas pipelines: | |||
| 7305 11 00 | – – Longitudinally submerged arc welded | Free | — |
| 7305 12 00 | – – Other, longitudinally welded | Free | — |
| 7305 19 00 | – – Other | Free | — |
| 7305 20 00 | – Casing of a kind used in drilling for oil or gas | Free | — |
| – Other, welded: | |||
| 7305 31 00 | – – Longitudinally welded | Free | — |
| 7305 39 00 | – – Other | Free | — |
| 7305 90 00 | – Other | Free | — |
| 7306 | Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel: | ||
| – Line pipe of a kind used for oil or gas pipelines: | |||
| 7306 11 00 | – – Welded, of stainless steel | Free | — |
| 7306 19 00 | – – Other | Free | — |
| – Casing and tubing of a kind used in drilling for oil or gas: | |||
| 7306 21 00 | – – Welded, of stainless steel | Free | — |
| 7306 29 00 | – – Other | Free | — |
| 7306 30 | – Other, welded, of circular cross-section, of iron or non-alloy steel: | ||
| – – Precision tubes: | |||
| 7306 30 12 | – – – Cold-drawn or cold-rolled (cold-reduced) | Free | — |
| 7306 30 18 | – – – Other | Free | — |
| – – Other: | |||
| – – – Threaded or threadable tubes (gas pipe): | |||
| 7306 30 41 | – – – – Plated or coated with zinc | Free | — |
| 7306 30 49 | – – – – Other | Free | — |
| – – – Other, of an external diameter: | |||
| – – – – Not exceeding 168,3 mm: | |||
| 7306 30 72 | – – – – – Plated or coated with zinc | Free | — |
| 7306 30 77 | – – – – – Other | Free | — |
| 7306 30 80 | – – – – Exceeding 168,3 mm but not exceeding 406,4 mm | Free | — |
| 7306 40 | – Other, welded, of circular cross-section, of stainless steel: | ||
| 7306 40 20 | – – Cold-drawn or cold-rolled (cold-reduced) | Free | — |
| 7306 40 80 | – – Other | Free | — |
| 7306 50 | – Other, welded, of circular cross-section, of other alloy steel: | ||
| – – Precision tubes: | |||
| 7306 50 21 | – – – Cold-drawn or cold-rolled (cold-reduced) | Free | — |
| 7306 50 29 | – – – Other | Free | — |
| 7306 50 80 | – – Other | Free | — |
| – Other, welded, of non-circular cross-section: | |||
| 7306 61 | – – Of square or rectangular cross-section: | ||
| 7306 61 10 | – – – Of stainless steel | Free | — |
| – – – Other: | |||
| 7306 61 92 | – – – – With a wall thickness not exceeding 2 mm | Free | — |
| 7306 61 99 | – – – – With a wall thickness exceeding 2 mm | Free | — |
| 7306 69 | – – Of other non-circular cross-section: | ||
| 7306 69 10 | – – – Of stainless steel | Free | — |
| 7306 69 90 | – – – Other | Free | — |
| 7306 90 00 | – Other | Free | — |
| 7307 | Tube or pipe fittings (for example, couplings, elbows, sleeves), of iron or steel: | ||
| – Cast fittings: | |||
| 7307 11 | – – Of non-malleable cast iron: | ||
| 7307 11 10 | – – – Of a kind used in pressure systems | 3,7 | — |
| 7307 11 90 | – – – Other | 3,7 | — |
| 7307 19 | – – Other: | ||
| 7307 19 10 | – – – Of cast iron | 3,7 | — |
| 7307 19 90 | – – – Other | 3,7 | — |
| – Other, of stainless steel: | |||
| 7307 21 00 | – – Flanges | 3,7 | — |
| 7307 22 | – – Threaded elbows, bends and sleeves: | ||
| 7307 22 10 | – – – Sleeves | Free | — |
| 7307 22 90 | – – – Elbows and bends | 3,7 | — |
| 7307 23 | – – Butt welding fittings: | ||
| 7307 23 10 | – – – Elbows and bends | 3,7 | — |
| 7307 23 90 | – – – Other | 3,7 | — |
| 7307 29 | – – Other: | ||
| 7307 29 10 | – – – Threaded | 3,7 | — |
| 7307 29 80 | – – – Other | 3,7 | — |
| – Other: | |||
| 7307 91 00 | – – Flanges | 3,7 | — |
| 7307 92 | – – Threaded elbows, bends and sleeves: | ||
| 7307 92 10 | – – – Sleeves | Free | — |
| 7307 92 90 | – – – Elbows and bends | 3,7 | — |
| 7307 93 | – – Butt welding fittings: | ||
| – – – With greatest external diameter not exceeding 609,6 mm: | |||
| 7307 93 11 | – – – – Elbows and bends | 3,7 | — |
| 7307 93 19 | – – – – Other | 3,7 | — |
| – – – With greatest external diameter exceeding 609,6 mm: | |||
| 7307 93 91 | – – – – Elbows and bends | 3,7 | — |
| 7307 93 99 | – – – – Other | 3,7 | — |
| 7307 99 | – – Other: | ||
| 7307 99 10 | – – – Threaded | 3,7 | — |
| 7307 99 80 | – – – Other | 3,7 | — |
| 7308 | Structures (excluding prefabricated buildings of heading 9406 ) and parts of structures (for example, bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns), of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel: | ||
| 7308 10 00 | – Bridges and bridge-sections | Free | — |
| 7308 20 | – Towers and lattice masts: | ||
| 7308 20 10 | – – Tubular wind turbine steel towers and tower-sections | Free | — |
| 7308 20 90 | – – Other | Free | — |
| 7308 30 00 | – Doors, windows and their frames and thresholds for doors | Free | p/st113 |
| 7308 40 00 | – Equipment for scaffolding, shuttering, propping or pit-propping | Free | — |
| 7308 90 | – Other: | ||
| – – Solely or principally of sheet: | |||
| 7308 90 51 | – – – Panels comprising two walls of profiled (ribbed) sheet with an insulating core | Free | — |
| 7308 90 59 | – – – Other | Free | — |
| 7308 90 98 | – – Other | Free | — |
| 7309 00 | Reservoirs, tanks, vats and similar containers for any material (other than compressed or liquefied gas), of iron or steel, of a capacity exceeding 300 l, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment: | ||
| 7309 00 10 | – For gases (other than compressed or liquefied gas) | 2,2 | — |
| – For liquids: | |||
| 7309 00 30 | – – Lined or heat-insulated | 2,2 | — |
| – – Other, of a capacity: | |||
| 7309 00 51 | – – – Exceeding 100 000 l | 2,2 | — |
| 7309 00 59 | – – – Not exceeding 100 000 l | 2,2 | — |
| 7309 00 90 | – For solids | 2,2 | — |
| 7310 | Tanks, casks, drums, cans, boxes and similar containers, for any material (other than compressed or liquefied gas), of iron or steel, of a capacity not exceeding 300 l, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment: | ||
| 7310 10 00 | – Of a capacity of 50 l or more | 2,7 | — |
| – Of a capacity of less than 50 l: | |||
| 7310 21 | – – Cans which are to be closed by soldering or crimping: | ||
| 7310 21 11 | – – – Cans of a kind used for preserving food | 2,7 | — |
| 7310 21 19 | – – – Cans of a kind used for preserving drink | 2,7 | — |
| – – – Other, with a wall thickness of: | |||
| 7310 21 91 | – – – – Less than 0,5 mm | 2,7 | — |
| 7310 21 99 | – – – – 0,5 mm or more | 2,7 | — |
| 7310 29 | – – Other: | ||
| 7310 29 10 | – – – With a wall thickness of less than 0,5 mm | 2,7 | — |
| 7310 29 90 | – – – With a wall thickness of 0,5 mm or more | 2,7 | — |
| 7311 00 | Containers for compressed or liquefied gas, of iron or steel: | ||
| – Seamless: | |||
| – – For a pressure of 165 bar or more, of a capacity of: | |||
| 7311 00 11 | – – – Less than 20 l | 2,7 | p/st |
| 7311 00 13 | – – – 20 l or more but not more than 50 l | 2,7 | p/st |
| 7311 00 19 | – – – More than 50 l | 2,7 | p/st |
| 7311 00 30 | – – Other | 2,7 | p/st |
| – Other, of a capacity of: | |||
| 7311 00 91 | – – Less than 1 000 l | 2,7 | — |
| 7311 00 99 | – – 1 000 l or more | 2,7 | — |
| 7312 | Stranded wire, ropes, cables, plaited bands, slings and the like, of iron or steel, not electrically insulated: | ||
| 7312 10 | – Stranded wire, ropes and cables: | ||
| 7312 10 20 | – – Of stainless steel | Free | — |
| – – Other, with a maximum cross-sectional dimension: | |||
| – – – Not exceeding 3 mm: | |||
| 7312 10 41 | – – – – Plated or coated with copper-zinc alloys (brass) | Free | — |
| 7312 10 49 | – – – – Other | Free | — |
| – – – Exceeding 3 mm: | |||
| – – – – Stranded wire: | |||
| 7312 10 61 | – – – – – Not coated | Free | — |
| – – – – – Coated: | |||
| 7312 10 65 | – – – – – – Plated or coated with zinc | Free | — |
| 7312 10 69 | – – – – – – Other | Free | — |
| – – – – Ropes and cables (including locked coil ropes): | |||
| – – – – – Not coated or only plated or coated with zinc, with a maximum cross-sectional dimension: | |||
| 7312 10 81 | – – – – – – Exceeding 3 mm but not exceeding 12 mm | Free | — |
| 7312 10 83 | – – – – – – Exceeding 12 mm but not exceeding 24 mm | Free | — |
| 7312 10 85 | – – – – – – Exceeding 24 mm but not exceeding 48 mm | Free | — |
| 7312 10 89 | – – – – – – Exceeding 48 mm | Free | — |
| 7312 10 98 | – – – – – Other | Free | — |
| 7312 90 00 | – Other | Free | — |
| 7313 00 00 | Barbed wire of iron or steel; twisted hoop or single flat wire, barbed or not, and loosely twisted double wire, of a kind used for fencing, of iron or steel | Free | — |
| 7314 | Cloth (including endless bands), grill, netting and fencing, of iron or steel wire; expanded metal of iron or steel: | ||
| – Woven cloth: | |||
| 7314 12 00 | – – Endless bands for machinery, of stainless steel | Free | — |
| 7314 14 00 | – – Other woven cloth, of stainless steel | Free | — |
| 7314 19 00 | – – Other | Free | — |
| 7314 20 | – Grill, netting and fencing, welded at the intersection, of wire with a maximum cross-sectional dimension of 3 mm or more and having a mesh size of 100 cm2 or more: | ||
| 7314 20 10 | – – Of ribbed wire | Free | — |
| 7314 20 90 | – – Other | Free | — |
| – Other grill, netting and fencing, welded at the intersection: | |||
| 7314 31 00 | – – Plated or coated with zinc | Free | — |
| 7314 39 00 | – – Other | Free | — |
| – Other cloth, grill, netting and fencing: | |||
| 7314 41 00 | – – Plated or coated with zinc | Free | — |
| 7314 42 00 | – – Coated with plastics | Free | — |
| 7314 49 00 | – – Other | Free | — |
| 7314 50 00 | – Expanded metal | Free | — |
| 7315 | Chain and parts thereof, of iron or steel: | ||
| – Articulated link chain and parts thereof: | |||
| 7315 11 | – – Roller chain: | ||
| 7315 11 10 | – – – Of a kind used for cycles and motorcycles | 2,7 | — |
| 7315 11 90 | – – – Other | 2,7 | — |
| 7315 12 00 | – – Other chain | 2,7 | — |
| 7315 19 00 | – – Parts | 2,7 | — |
| 7315 20 00 | – Skid chain | 2,7 | — |
| – Other chain: | |||
| 7315 81 00 | – – Stud-link | 2,7 | — |
| 7315 82 00 | – – Other, welded link | 2,7 | — |
| 7315 89 00 | – – Other | 2,7 | — |
| 7315 90 00 | – Other parts | 2,7 | — |
| 7316 00 00 | Anchors, grapnels and parts thereof, of iron or steel | 2,7 | — |
| 7317 00 | Nails, tacks, drawing pins, corrugated nails, staples (other than those of heading 8305 ) and similar articles, of iron or steel, whether or not with heads of other material, but excluding such articles with heads of copper: | ||
| – Made from wire: | |||
| 7317 00 20 | – – Nails in strips or coils | Free | — |
| 7317 00 60 | – – Other | Free | — |
| 7317 00 80 | – Other | Free | — |
| 7318 | Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of iron or steel: | ||
| – Threaded articles: | |||
| 7318 11 00 | – – Coach screws | 3,7 | — |
| 7318 12 | – – Other wood screws: | ||
| 7318 12 10 | – – – Of stainless steel | 3,7 | — |
| 7318 12 90 | – – – Other | 3,7 | — |
| 7318 13 00 | – – Screw hooks and screw rings | 3,7 | — |
| 7318 14 | – – Self-tapping screws: | ||
| 7318 14 10 | – – – Of stainless steel | 3,7 | — |
| – – – Other: | |||
| 7318 14 91 | – – – – Spaced-thread screws | 3,7 | — |
| 7318 14 99 | – – – – Other | 3,7 | — |
| 7318 15 | – – Other screws and bolts, whether or not with their nuts or washers: | ||
| 7318 15 20 | – – – For fixing railway track construction material | 3,7 | — |
| – – – Other: | |||
| – – – – Without heads: | |||
| 7318 15 35 | – – – – – Of stainless steel | 3,7 | — |
| – – – – – Other, with a tensile strength: | |||
| 7318 15 42 | – – – – – – Of less than 800 MPa | 3,7 | — |
| 7318 15 48 | – – – – – – Of 800 MPa or more | 3,7 | — |
| – – – – With heads: | |||
| – – – – – Slotted or cross-recessed heads: | |||
| 7318 15 52 | – – – – – – Of stainless steel | 3,7 | — |
| 7318 15 58 | – – – – – – Other | 3,7 | — |
| – – – – – Hexagonal-socket heads: | |||
| 7318 15 62 | – – – – – – Of stainless steel | 3,7 | — |
| 7318 15 68 | – – – – – – Other | 3,7 | — |
| – – – – – Hexagonal heads: | |||
| 7318 15 75 | – – – – – – Of stainless steel | 3,7 | — |
| – – – – – – Other, with a tensile strength: | |||
| 7318 15 82 | – – – – – – – Of less than 800 MPa | 3,7 | — |
| 7318 15 88 | – – – – – – – Of 800 MPa or more | 3,7 | — |
| 7318 15 95 | – – – – – Other | 3,7 | — |
| 7318 16 | – – Nuts: | ||
| – – – Of stainless steel: | |||
| 7318 16 31 | – – – – Blind rivet nuts | 3,7 | — |
| 7318 16 39 | – – – – Other | 3,7 | — |
| – – – Other: | |||
| 7318 16 40 | – – – – Blind rivet nuts | 3,7 | — |
| 7318 16 60 | – – – – Self-locking nuts | 3,7 | — |
| – – – – Other, with an inside diameter: | |||
| 7318 16 92 | – – – – – Not exceeding 12 mm | 3,7 | — |
| 7318 16 99 | – – – – – Exceeding 12 mm | 3,7 | — |
| 7318 19 00 | – – Other | 3,7 | — |
| – Non-threaded articles: | |||
| 7318 21 00 | – – Spring washers and other lock washers | 3,7 | — |
| 7318 22 00 | – – Other washers | 3,7 | — |
| 7318 23 00 | – – Rivets | 3,7 | — |
| 7318 24 00 | – – Cotters and cotter pins | 3,7 | — |
| 7318 29 00 | – – Other | 3,7 | — |
| 7319 | Sewing needles, knitting needles, bodkins, crochet hooks, embroidery stilettos and similar articles, for use in the hand, of iron or steel; safety pins and other pins of iron or steel, not elsewhere specified or included: | ||
| 7319 40 00 | – Safety pins and other pins | 2,7 | — |
| 7319 90 | – Other: | ||
| 7319 90 10 | – – Sewing, darning or embroidery needles | 2,7 | — |
| 7319 90 90 | – – Other | 2,7 | — |
| 7320 | Springs and leaves for springs, of iron or steel: | ||
| 7320 10 | – Leaf-springs and leaves therefor: | ||
| – – Hot-worked: | |||
| 7320 10 11 | – – – Laminated springs and leaves therefor | 2,7 | — |
| 7320 10 19 | – – – Other | 2,7 | — |
| 7320 10 90 | – – Other | 2,7 | — |
| 7320 20 | – Helical springs: | ||
| 7320 20 20 | – – Hot-worked | 2,7 | — |
| – – Other: | |||
| 7320 20 81 | – – – Coil compression springs | 2,7 | — |
| 7320 20 85 | – – – Coil tension springs | 2,7 | — |
| 7320 20 89 | – – – Other | 2,7 | — |
| 7320 90 | – Other: | ||
| 7320 90 10 | – – Flat spiral springs | 2,7 | — |
| 7320 90 30 | – – Discs springs | 2,7 | — |
| 7320 90 90 | – – Other | 2,7 | — |
| 7321 | Stoves, ranges, grates, cookers (including those with subsidiary boilers for central heating), barbecues, braziers, gas rings, plate warmers and similar non-electric domestic appliances, and parts thereof, of iron or steel: | ||
| – Cooking appliances and plate warmers: | |||
| 7321 11 | – – For gas fuel or for both gas and other fuels: | ||
| 7321 11 10 | – – – With oven, including separate ovens | 2,7 | p/st |
| 7321 11 90 | – – – Other | 2,7 | p/st |
| 7321 12 00 | – – For liquid fuel | 2,7 | p/st |
| 7321 19 00 | – – Other, including appliances for solid fuel | 2,7 | p/st |
| – Other appliances: | |||
| 7321 81 00 | – – For gas fuel or for both gas and other fuels | 2,7 | p/st |
| 7321 82 00 | – – For liquid fuel | 2,7 | p/st |
| 7321 89 00 | – – Other, including appliances for solid fuel | 2,7 | p/st |
| 7321 90 00 | – Parts | 2,7 | — |
| 7322 | Radiators for central heating, not electrically heated, and parts thereof, of iron or steel; air heaters and hot-air distributors (including distributors which can also distribute fresh or conditioned air), not electrically heated, incorporating a motor-driven fan or blower, and parts thereof, of iron or steel: | ||
| – Radiators and parts thereof: | |||
| 7322 11 00 | – – Of cast iron | 3,2 | — |
| 7322 19 00 | – – Other | 3,2 | — |
| 7322 90 00 | – Other | 3,2 | — |
| 7323 | Table, kitchen or other household articles and parts thereof, of iron or steel; iron or steel wool; pot scourers and scouring or polishing pads, gloves and the like, of iron or steel: | ||
| 7323 10 00 | – Iron or steel wool; pot scourers and scouring or polishing pads, gloves and the like | 3,2 | — |
| – Other: | |||
| 7323 91 00 | – – Of cast iron, not enamelled | 3,2 | — |
| 7323 92 00 | – – Of cast iron, enamelled | 3,2 | — |
| 7323 93 00 | – – Of stainless steel | 3,2 | — |
| 7323 94 00 | – – Of iron (other than cast iron) or steel, enamelled | 3,2 | — |
| 7323 99 00 | – – Other | 3,2 | — |
| 7324 | Sanitary ware and parts thereof, of iron or steel: | ||
| 7324 10 00 | – Sinks and washbasins, of stainless steel | 2,7 | — |
| – Baths: | |||
| 7324 21 00 | – – Of cast iron, whether or not enamelled | 3,2 | p/st |
| 7324 29 00 | – – Other | 3,2 | p/st |
| 7324 90 00 | – Other, including parts | 3,2 | — |
| 7325 | Other cast articles of iron or steel: | ||
| 7325 10 00 | – Of non-malleable cast iron | 1,7 | — |
| – Other: | |||
| 7325 91 00 | – – Grinding balls and similar articles for mills | 2,7 | — |
| 7325 99 | – – Other: | ||
| 7325 99 10 | – – – Of cast iron | 2,7 | — |
| 7325 99 90 | – – – Other | 2,7 | — |
| 7326 | Other articles of iron or steel: | ||
| – Forged or stamped, but not further worked: | |||
| 7326 11 00 | – – Grinding balls and similar articles for mills | 2,7 | — |
| 7326 19 | – – Other: | ||
| 7326 19 10 | – – – Open-die forged | 2,7 | — |
| 7326 19 90 | – – – Other | 2,7 | — |
| 7326 20 00 | – Articles of iron or steel wire | 2,7 | — |
| 7326 90 | – Other: | ||
| 7326 90 30 | – – Ladders and steps | 2,7 | — |
| 7326 90 40 | – – Pallets and similar platforms for handling goods | 2,7 | — |
| 7326 90 50 | – – Reels for cables, piping and the like | 2,7 | — |
| 7326 90 60 | – – Non-mechanical ventilators, guttering, hooks and like articles used in the building industry | 2,7 | — |
| – – Other articles of iron or steel: | |||
| 7326 90 92 | – – – Open-die forged | 2,7 | — |
| 7326 90 94 | – – – Closed-die forged | 2,7 | — |
| 7326 90 96 | – – – Sintered | 2,7 | — |
| 7326 90 98 | – – – Other | 2,7 | — |
CHAPTER 74
COPPER AND ARTICLES THEREOF
Note
-
- In this chapter, the following expressions have the meanings hereby assigned to them:
- (a) Refined copper:
Metal containing at least 99,85 % by weight of copper; or
Metal containing at least 97,5 % by weight of copper, provided that the content by weight of any other element does not exceed the limit specified in the following table:
Other elements
| Element | Element | Limiting content % by weight |
|---|---|---|
| Ag | Silver | 0,25 |
| As | Arsenic | 0,5 |
| Cd | Cadmium | 1,3 |
| Cr | Chromium | 1,4 |
| Mg | Magnesium | 0,8 |
| Pb | Lead | 1,5 |
| S | Sulphur | 0,7 |
| Sn | Tin | 0,8 |
| Te | Tellurium | 0,8 |
| Zn | Zinc | 1 |
| Zr | Zirconium | 0,3 |
| Other elements123, each | Other elements123, each | 0,3 |
- (b) Copper alloys:
Metallic substances other than unrefined copper in which copper predominates by weight over each of the other elements, provided that:
- (1) the content by weight of at least one of the other elements is greater than the limit specified in the foregoing table; or
- (2) the total content by weight of such other elements exceeds 2,5 %.
- (c) Master alloys:
Alloys containing with other elements more than 10 % by weight of copper, not usefully malleable and commonly used as an additive in the manufacture of other alloys or as de-oxidants, de-sulphurising agents or for similar uses in the metallurgy of non-ferrous metals. However, copper phosphide (phosphor copper) containing more than 15 % by weight of phosphorus falls in heading 2853 .
Subheading note
-
- In this chapter, the following expressions have the meanings hereby assigned to them:
- (a) Copper-zinc base alloys (brasses):
Alloys of copper and zinc, with or without other elements. When other elements are present:
- — zinc predominates by weight over each of such other elements,
- — any nickel content by weight is less than 5 % (see copper-nickel-zinc alloys (nickel silvers)), and
- — any tin content by weight is less than 3 % (see copper-tin alloys (bronzes)).
- (b) Copper-tin base alloys (bronzes):
Alloys of copper and tin, with or without other elements. When other elements are present, tin predominates by weight over each of such other elements, except that when the tin content is 3 % or more the zinc content by weight may exceed that of tin but must be less than 10 %.
- (c) Copper-nickel-zinc base alloys (nickel silvers):
Alloys of copper, nickel and zinc, with or without other elements. The nickel content is 5 % or more by weight (see copper-zinc alloys (brasses)).
- (d) Copper-nickel base alloys:
Alloys of copper and nickel, with or without other elements but in any case containing by weight not more than 1 % of zinc. When other elements are present, nickel predominates by weight over each of such other elements.
| CN code | Description | Conventional rate of duty (%) | Supplementary unit |
|---|---|---|---|
| 1 | 2 | 3 | 4 |
| 7401 00 00 | Copper mattes; cement copper (precipitated copper) | Free | — |
| 7402 00 00 | Unrefined copper; copper anodes for electrolytic refining | Free | — |
| 7403 | Refined copper and copper alloys, unwrought: | ||
| – Refined copper: | |||
| 7403 11 00 | – – Cathodes and sections of cathodes | Free | — |
| 7403 12 00 | – – Wire-bars | Free | — |
| 7403 13 00 | – – Billets | Free | — |
| 7403 19 00 | – – Other | Free | — |
| – Copper alloys: | |||
| 7403 21 00 | – – Copper-zinc base alloys (brass) | Free | — |
| 7403 22 00 | – – Copper-tin base alloys (bronze) | Free | — |
| 7403 29 00 | – – Other copper alloys (other than master alloys of heading 7405 ) | Free | — |
| 7404 00 | Copper waste and scrap: | ||
| 7404 00 10 | – Of refined copper | Free | — |
| – Of copper alloys: | |||
| 7404 00 91 | – – Of copper-zinc base alloys (brass) | Free | — |
| 7404 00 99 | – – Other | Free | — |
| 7405 00 00 | Master alloys of copper | Free | — |
| 7406 | Copper powders and flakes: | ||
| 7406 10 00 | – Powders of non-lamellar structure | Free | — |
| 7406 20 00 | – Powders of lamellar structure; flakes | Free | — |
| 7407 | Copper bars, rods and profiles: | ||
| 7407 10 00 | – Of refined copper | 4,8 | — |
| – Of copper alloys: | |||
| 7407 21 | – – Of copper-zinc base alloys (brass): | ||
| 7407 21 10 | – – – Bars and rods | 4,8 | — |
| 7407 21 90 | – – – Profiles | 4,8 | — |
| 7407 29 00 | – – Other | 4,8 | — |
| 7408 | Copper wire: | ||
| – Of refined copper: | |||
| 7408 11 00 | – – Of which the maximum cross-sectional dimension exceeds 6 mm | 4,8 | — |
| 7408 19 | – – Other: | ||
| 7408 19 10 | – – – Of which the maximum cross-sectional dimension exceeds 0,5 mm | 4,8 | — |
| 7408 19 90 | – – – Of which the maximum cross-sectional dimension does not exceed 0,5 mm | 4,8 | — |
| – Of copper alloys: | |||
| 7408 21 00 | – – Of copper-zinc base alloys (brass) | 4,8 | — |
| 7408 22 00 | – – Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver) | 4,8 | — |
| 7408 29 00 | – – Other | 4,8 | — |
| 7409 | Copper plates, sheets and strip, of a thickness exceeding 0,15 mm: | ||
| – Of refined copper: | |||
| 7409 11 00 | – – In coils | 4,8 | — |
| 7409 19 00 | – – Other | 4,8 | — |
| – Of copper-zinc base alloys (brass): | |||
| 7409 21 00 | – – In coils | 4,8 | — |
| 7409 29 00 | – – Other | 4,8 | — |
| – Of copper-tin base alloys (bronze): | |||
| 7409 31 00 | – – In coils | 4,8 | — |
| 7409 39 00 | – – Other | 4,8 | — |
| 7409 40 00 | – Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver) | 4,8 | — |
| 7409 90 00 | – Of other copper alloys | 4,8 | — |
| 7410 | Copper foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,15 mm: | ||
| – Not backed: | |||
| 7410 11 00 | – – Of refined copper | 5,2 | — |
| 7410 12 00 | – – Of copper alloys | 5,2 | — |
| – Backed: | |||
| 7410 21 00 | – – Of refined copper | 5,2 | — |
| 7410 22 00 | – – Of copper alloys | 5,2 | — |
| 7411 | Copper tubes and pipes: | ||
| 7411 10 | – Of refined copper: | ||
| 7411 10 10 | – – Straight | 4,8 | — |
| 7411 10 90 | – – Other | 4,8 | — |
| – Of copper alloys: | |||
| 7411 21 | – – Of copper-zinc base alloys (brass): | ||
| 7411 21 10 | – – – Straight | 4,8 | — |
| 7411 21 90 | – – – Other | 4,8 | — |
| 7411 22 00 | – – Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver) | 4,8 | — |
| 7411 29 00 | – – Other | 4,8 | — |
| 7412 | Copper tube or pipe fittings (for example, couplings, elbows, sleeves): | ||
| 7412 10 00 | – Of refined copper | 5,2 | — |
| 7412 20 00 | – Of copper alloys | 5,2 | — |
| 7413 00 00 | Stranded wire, cables, plaited bands and the like, of copper, not electrically insulated | 5,2 | — |
| [7414 ] | |||
| 7415 | Nails, tacks, drawing pins, staples (other than those of heading 8305 ) and similar articles, of copper or of iron or steel with heads of copper; screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of copper: | ||
| 7415 10 00 | – Nails and tacks, drawing pins, staples and similar articles | 4 | — |
| – Other articles, not threaded: | |||
| 7415 21 00 | – – Washers (including spring washers) | 3 | — |
| 7415 29 00 | – – Other | 3 | — |
| – Other threaded articles: | |||
| 7415 33 00 | – – Screws; bolts and nuts | 3 | — |
| 7415 39 00 | – – Other | 3 | — |
| [7416 ] | |||
| [7417 ] | |||
| 7418 | Table, kitchen or other household articles and parts thereof, of copper; pot scourers and scouring or polishing pads, gloves and the like, of copper; sanitary ware and parts thereof, of copper: | ||
| 7418 10 | – Table, kitchen or other household articles and parts thereof; pot scourers and scouring or polishing pads, gloves and the like: | ||
| 7418 10 10 | – – Cooking or heating apparatus of a kind used for domestic purposes, non-electric, and parts thereof | 4 | — |
| 7418 10 90 | – – Other | 3 | — |
| 7418 20 00 | – Sanitary ware and parts thereof | 3 | — |
| 7419 | Other articles of copper: | ||
| 7419 20 00 | – Cast, moulded, stamped or forged, but not further worked | 3 | — |
| 7419 80 | – Other: | ||
| 7419 80 10 | – – Cloth (including endless bands), grill and netting, of wire of which no cross-sectional dimension exceeds 6 mm; expanded metal | 4,3 | — |
| 7419 80 30 | – – Springs | 4 | — |
| 7419 80 90 | – – Other | 3 | — |
CHAPTER 75
NICKEL AND ARTICLES THEREOF
Subheading notes
-
- In this chapter, the following expressions have the meanings hereby assigned to them:
- (a) Nickel, not alloyed:
Metal containing by weight at least 99 % of nickel plus cobalt, provided that:
- (1) the cobalt content by weight does not exceed 1,5 %, and
- (2) the content by weight of any other element does not exceed the limit specified in the following table:
Other elements
| Element | Element | Limiting content % by weight |
|---|---|---|
| Fe | Iron | 0,5 |
| O | Oxygen | 0,4 |
| Other elements, each | Other elements, each | 0,3 |
- (b) Nickel alloys:
Metallic substances in which nickel predominates by weight over each of the other elements provided that:
- (1) the content by weight of cobalt exceeds 1,5 %,
- (2) the content by weight of at least one of the other elements is greater than the limit specified in the foregoing table, or
- (3) the total content by weight of elements other than nickel plus cobalt exceeds 1 %.
-
- Notwithstanding the provisions of note 9(c) to Section XV, for the purposes of subheading 7508 10 the term ‘wire’ applies only to products, whether or not in coils, of any cross-sectional shape, of which no cross-sectional dimension exceeds 6 mm.
| CN code | Description | Conventional rate of duty (%) | Supplementary unit |
|---|---|---|---|
| 1 | 2 | 3 | 4 |
| 7501 | Nickel mattes, nickel oxide sinters and other intermediate products of nickel metallurgy: | ||
| 7501 10 00 | – Nickel mattes | Free | — |
| 7501 20 00 | – Nickel oxide sinters and other intermediate products of nickel metallurgy | Free | — |
| 7502 | Unwrought nickel: | ||
| 7502 10 00 | – Nickel, not alloyed | Free | — |
| 7502 20 00 | – Nickel alloys | Free | — |
| 7503 00 | Nickel waste and scrap: | ||
| 7503 00 10 | – Of nickel, not alloyed | Free | — |
| 7503 00 90 | – Of nickel alloys | Free | — |
| 7504 00 00 | Nickel powders and flakes | Free | — |
| 7505 | Nickel bars, rods, profiles and wire: | ||
| – Bars, rods and profiles: | |||
| 7505 11 00 | – – Of nickel, not alloyed | Free | — |
| 7505 12 00 | – – Of nickel alloys | 2,9 | — |
| – Wire: | |||
| 7505 21 00 | – – Of nickel, not alloyed | Free | — |
| 7505 22 00 | – – Of nickel alloys | 2,9 | — |
| 7506 | Nickel plates, sheets, strip and foil: | ||
| 7506 10 00 | – Of nickel, not alloyed | Free | — |
| 7506 20 00 | – Of nickel alloys | 3,3 | — |
| 7507 | Nickel tubes, pipes and tube or pipe fittings (for example, couplings, elbows, sleeves): | ||
| – Tubes and pipes: | |||
| 7507 11 00 | – – Of nickel, not alloyed | Free | — |
| 7507 12 00 | – – Of nickel alloys | Free | — |
| 7507 20 00 | – Tube or pipe fittings | 2,5 | — |
| 7508 | Other articles of nickel: | ||
| 7508 10 00 | – Cloth, grill and netting, of nickel wire | Free | — |
| 7508 90 00 | – Other | Free | — |
CHAPTER 76
ALUMINIUM AND ARTICLES THEREOF
Subheading notes
-
- In this chapter, the following expressions have the meanings hereby assigned to them:
- (a) Aluminium, not alloyed:
Metal containing by weight at least 99 % of aluminium, provided that the content by weight of any other element does not exceed the limit specified in the following table:
Other elements
| Element | Limiting content % by weight |
|---|---|
| Fe + Si (iron plus silicon) | 1 |
| Other elements124, each | 0,1125 |
- (b) Aluminium alloys:
Metallic substances in which aluminium predominates by weight over each of the other elements, provided that:
- (1) the content by weight of at least one of the other elements or of iron plus silicon taken together is greater than the limit specified in the foregoing table; or
- (2) the total content by weight of such other elements exceeds 1 %.
-
- Notwithstanding the provisions of note 9(c) to Section XV, for the purposes of subheading 7616 91 the term ‘wire’ applies only to products, whether or not in coils, of any cross-sectional shape, of which no cross-sectional dimension exceeds 6 mm.
Additional notes
-
- For the purposes of subheadings 7601 10 10 , 7601 20 30 and 7601 20 40 , the following terms shall have the meaning hereby assigned to them:
- — ‘slabs’: unwrought products which have a uniform solid cross-section along their whole length in the shape of a rectangle or other polygon, of a width exceeding 800 mm, of a thickness exceeding 280 mm and of a length always superior to the width and to the thickness. These products are intended for being rolled;
- — ‘billets’: unwrought products which have a uniform solid cross-section along their whole length in the shape of a circle (including a ‘flattened circle’), of a diameter exceeding 125 mm.
-
- For the purposes of subheadings 7606 12 11 and 7606 12 19 , the following terms shall have the meaning hereby assigned to them:
- — ‘beverage can body stock’: sheets or strips in coils, rolled, having manganese and magnesium as main alloying elements and having a minimum tensile strength of 262 MPa. The sheets or strips have a uniform solid cross-section along their whole length, are of a width of 300 mm or more but not more than 2 000 mm, of a thickness exceeding 0,2 mm but not exceeding 0,4 mm, and of a length always superior to the width and to the thickness. Beverage can body stock is prelubricated, with a bright surface;
- — ‘beverage can end stock and tab stock’: sheets or strips in coils, having magnesium as the main alloying element and having a minimum tensile strength 345 MPa. The sheets or strips have a uniform solid cross-section along their whole length, are of a width of 30 mm or more but not more than 2 000 mm, of a thickness exceeding 0,2 mm but not exceeding 0,35 mm, and of a length always superior to the width and to the thickness. Beverage can end stock is varnished on both sides. Beverage can tab stock is degreased and oiled.
These products are to be used for the fabrication of rigid beverage cans, including ends (lids) and tabs.
-
- For the purposes of subheadings 7606 11 30 , 7606 12 30 and 7607 20 91 , the following term shall have the meaning hereby assigned to it:
- — ‘Aluminium Composite Panel’: laminated goods consisting of two flat-rolled sheets or foils of aluminium, whether or not alloyed, each of them having a thickness of not less than 0,08 mm but not exceeding 0,55 mm, and a continuous core of non-porous polymer or mineral material, held together with an adhesive, all together having a thickness of 1,0 mm or more, but not exceeding 6,1 mm. The two external aluminium cover sheets or foils can have different finishes. These goods cannot be coiled.
| CN code | Description | Conventional rate of duty (%) | Supplementary unit |
|---|---|---|---|
| 1 | 2 | 3 | 4 |
| 7601 | Unwrought aluminium: | ||
| 7601 10 | – Aluminium, not alloyed: | ||
| 7601 10 10 | – – Slabs | 6118 | — |
| 7601 10 90 | – – Other | 6118 | — |
| 7601 20 | – Aluminium alloys: | ||
| 7601 20 30 | – – Slabs | 6 | — |
| 7601 20 40 | – – Billets | 6 | — |
| 7601 20 80 | – – Other | 6 | — |
| 7602 00 | Aluminium waste and scrap: | ||
| – Waste: | |||
| 7602 00 11 | – – Turnings, shavings, chips, milling waste, sawdust and filings; waste of coloured, coated or bonded sheets and foil, of a thickness (excluding any backing) not exceeding 0,2 mm | Free | — |
| 7602 00 19 | – – Other (including factory rejects) | Free | — |
| 7602 00 90 | – Scrap | Free | — |
| 7603 | Aluminium powders and flakes: | ||
| 7603 10 00 | – Powders of non-lamellar structure | 5 | — |
| 7603 20 00 | – Powders of lamellar structure; flakes | 5 | — |
| 7604 | Aluminium bars, rods and profiles: | ||
| 7604 10 | – Of aluminium, not alloyed: | ||
| 7604 10 10 | – – Bars and rods | 7,5 | — |
| 7604 10 90 | – – Profiles | 7,5 | — |
| – Of aluminium alloys: | |||
| 7604 21 00 | – – Hollow profiles | 7,5 | — |
| 7604 29 | – – Other: | ||
| 7604 29 10 | – – – Bars and rods | 7,5 | — |
| 7604 29 90 | – – – Profiles | 7,5 | — |
| 7605 | Aluminium wire: | ||
| – Of aluminium, not alloyed: | |||
| 7605 11 00 | – – Of which the maximum cross-sectional dimension exceeds 7 mm | 7,5 | — |
| 7605 19 00 | – – Other | 7,5 | — |
| – Of aluminium alloys: | |||
| 7605 21 00 | – – Of which the maximum cross-sectional dimension exceeds 7 mm | 7,5 | — |
| 7605 29 00 | – – Other | 7,5 | — |
| 7606 | Aluminium plates, sheets and strip, of a thickness exceeding 0,2 mm: | ||
| – Rectangular (including square): | |||
| 7606 11 | – – Of aluminium, not alloyed: | ||
| 7606 11 30 | – – – Aluminium Composite Panel | 7,5 | m2 |
| – – – Other: | |||
| 7606 11 50 | – – – – Painted, varnished or coated with plastics | 7,5 | — |
| – – – – Other, of a thickness of: | |||
| 7606 11 91 | – – – – – Less than 3 mm | 7,5 | — |
| 7606 11 93 | – – – – – Not less than 3 mm but less than 6 mm | 7,5 | — |
| 7606 11 99 | – – – – – Not less than 6 mm | 7,5 | — |
| 7606 12 | – – Of aluminium alloys: | ||
| – – – Beverage can body stock, end stock and tab stock: | |||
| 7606 12 11 | – – – – Beverage can body stock | 7,5 | — |
| 7606 12 19 | – – – – Beverage can end stock and tab stock | 7,5 | — |
| 7606 12 30 | – – – Aluminium Composite Panel | 7,5 | m2 |
| – – – Other: | |||
| 7606 12 50 | – – – – Painted, varnished or coated with plastics | 7,5 | — |
| – – – – Other, of a thickness of: | |||
| 7606 12 92 | – – – – – Less than 3 mm | 7,5 | — |
| 7606 12 93 | – – – – – Not less than 3 mm but less than 6 mm | 7,5 | — |
| 7606 12 99 | – – – – – Not less than 6 mm | 7,5 | — |
| – Other: | |||
| 7606 91 00 | – – Of aluminium, not alloyed | 7,5 | — |
| 7606 92 00 | – – Of aluminium alloys | 7,5 | — |
| 7607 | Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2 mm: | ||
| – Not backed: | |||
| 7607 11 | – – Rolled but not further worked: | ||
| – – – Of a thickness of less than 0,021 mm: | |||
| 7607 11 11 | – – – – In rolls of a weight not exceeding 10 kg | 7,5 | — |
| 7607 11 19 | – – – – Other | 7,5 | — |
| 7607 11 90 | – – – Of a thickness of not less than 0,021 mm but not more than 0,2 mm | 7,5 | — |
| 7607 19 | – – Other: | ||
| 7607 19 10 | – – – Of a thickness of less than 0,021 mm | 7,5 | — |
| 7607 19 90 | – – – Of a thickness of not less than 0,021 mm but not more than 0,2 mm | 7,5 | — |
| 7607 20 | – Backed: | ||
| 7607 20 10 | – – Of a thickness (excluding any backing) of less than 0,021 mm | 10 | — |
| – – Of a thickness (excluding any backing) of not less than 0,021 mm but not more than 0,2 mm: | |||
| 7607 20 91 | – – – Aluminium Composite Panel | 7,5 | m2 |
| 7607 20 99 | – – – Other | 7,5 | — |
| 7608 | Aluminium tubes and pipes: | ||
| 7608 10 00 | – Of aluminium, not alloyed | 7,5 | — |
| 7608 20 | – Of aluminium alloys: | ||
| 7608 20 20 | – – Welded | 7,5 | — |
| – – Other: | |||
| 7608 20 81 | – – – Not further worked than extruded | 7,5 | — |
| 7608 20 89 | – – – Other | 7,5 | — |
| 7609 00 00 | Aluminium tube or pipe fittings (for example, couplings, elbows, sleeves) | 5,9 | — |
| 7610 | Aluminium structures (excluding prefabricated buildings of heading 9406 ) and parts of structures (for example, bridges and bridge-sections, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, balustrades, pillars and columns); aluminium plates, rods, profiles, tubes and the like, prepared for use in structures: | ||
| 7610 10 00 | – Doors, windows and their frames and thresholds for doors | 6 | p/st113 |
| 7610 90 | – Other: | ||
| 7610 90 10 | – – Bridges and bridge-sections, towers and lattice masts | 7 | — |
| 7610 90 90 | – – Other | 6 | — |
| 7611 00 00 | Aluminium reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment | 6 | — |
| 7612 | Aluminium casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment: | ||
| 7612 10 00 | – Collapsible tubular containers | 6 | — |
| 7612 90 | – Other: | ||
| 7612 90 20 | – – Containers of a kind used for aerosols | 6 | p/st |
| 7612 90 30 | – – Manufactured from foil of a thickness not exceeding 0,2 mm | 6 | — |
| 7612 90 80 | – – Other | 6 | — |
| 7613 00 00 | Aluminium containers for compressed or liquefied gas | 6 | — |
| 7614 | Stranded wire, cables, plaited bands and the like, of aluminium, not electrically insulated: | ||
| 7614 10 00 | – With steel core | 6 | — |
| 7614 90 00 | – Other | 6 | — |
| 7615 | Table, kitchen or other household articles and parts thereof, of aluminium; pot scourers and scouring or polishing pads, gloves and the like, of aluminium; sanitary ware and parts thereof, of aluminium: | ||
| 7615 10 | – Table, kitchen or other household articles and parts thereof; pot scourers and scouring or polishing pads, gloves and the like: | ||
| 7615 10 10 | – – Cast | 6 | — |
| 7615 10 30 | – – Manufactured from foil of a thickness not exceeding 0,2 mm | 6 | — |
| 7615 10 80 | – – Other | 6 | — |
| 7615 20 00 | – Sanitary ware and parts thereof | 6 | — |
| 7616 | Other articles of aluminium: | ||
| 7616 10 00 | – Nails, tacks, staples (other than those of heading 8305 ), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles | 6 | — |
| – Other: | |||
| 7616 91 00 | – – Cloth, grill, netting and fencing, of aluminium wire | 6 | — |
| 7616 99 | – – Other: | ||
| 7616 99 10 | – – – Cast | 6 | — |
| 7616 99 90 | – – – Other | 6 | — |
CHAPTER 78
LEAD AND ARTICLES THEREOF
Subheading note
-
- In this chapter, the expression ‘refined lead’ means:
Metal containing by weight at least 99,9 % of lead, provided that the content by weight of any other element does not exceed the limit specified in the following table:
Other elements
| Element | Element | Limiting content % by weight |
|---|---|---|
| Ag | Silver | 0,02 |
| As | Arsenic | 0,005 |
| Bi | Bismuth | 0,05 |
| Ca | Calcium | 0,002 |
| Cd | Cadmium | 0,002 |
| Cu | Copper | 0,08 |
| Fe | Iron | 0,002 |
| S | Sulphur | 0,002 |
| Sb | Antimony | 0,005 |
| Sn | Tin | 0,005 |
| Zn | Zinc | 0,002 |
| Other (for example, Te), each | Other (for example, Te), each | 0,001 |
| CN code | Description | Conventional rate of duty (%) |
| --- | --- | --- |
| 1 | 2 | 3 |
| 7801 | Unwrought lead: | |
| 7801 10 00 | – Refined lead | 2,5 |
| – Other: | ||
| 7801 91 00 | – – Containing by weight antimony as the principal other element | 2,5126 |
| 7801 99 | – – Other: | |
| 7801 99 10 | – – – For refining, containing 0,02 % or more by weight of silver (bullion lead)32 | Free |
| 7801 99 90 | – – – Other | 2,5 |
| 7802 00 00 | Lead waste and scrap | Free |
| [7803 ] | ||
| 7804 | Lead plates, sheets, strip and foil; lead powders and flakes: | |
| – Plates, sheets, strip and foil: | ||
| 7804 11 00 | – – Sheets, strip and foil of a thickness (excluding any backing) not exceeding 0,2 mm | 5 |
| 7804 19 00 | – – Other | 5 |
| 7804 20 00 | – Powders and flakes | Free |
| [7805 ] | ||
| 7806 00 | Other articles of lead: | |
| 7806 00 10 | – Containers with an anti-radiation lead covering, for the transport or storage of radioactive materials (Euratom) | Free |
| 7806 00 80 | – Other | 5 |
CHAPTER 79
ZINC AND ARTICLES THEREOF
Subheading note
-
- In this chapter, the following expressions have the meanings hereby assigned to them:
- (a) Zinc, not alloyed:
Metal containing by weight at least 97,5 % of zinc.
- (b) Zinc alloys:
Metallic substances in which zinc predominates by weight over each of the other elements, provided that the total content by weight of such other elements exceeds 2,5 %.
- (c) Zinc dust:
Dust obtained by condensation of zinc vapour, consisting of spherical particles which are finer than zinc powders. At least 80 % by weight of the particles pass through a sieve with 63 μm (microns) mesh. It must contain at least 85 % by weight of metallic zinc.
| CN code | Description | Conventional rate of duty (%) | Supplementary unit |
|---|---|---|---|
| 1 | 2 | 3 | 4 |
| 7901 | Unwrought zinc: | ||
| – Zinc, not alloyed: | |||
| 7901 11 00 | – – Containing by weight 99,99 % or more of zinc | 2,5 | — |
| 7901 12 | – – Containing by weight less than 99,99 % of zinc: | ||
| 7901 12 10 | – – – Containing by weight 99,95 % or more but less than 99,99 % of zinc | 2,5 | — |
| 7901 12 30 | – – – Containing by weight 98,5 % or more but less than 99,95 % of zinc | 2,5 | — |
| 7901 12 90 | – – – Containing by weight 97,5 % or more but less than 98,5 % of zinc | 2,5 | — |
| 7901 20 00 | – Zinc alloys | 2,5 | — |
| 7902 00 00 | Zinc waste and scrap | Free | — |
| 7903 | Zinc dust, powders and flakes: | ||
| 7903 10 00 | – Zinc dust | 2,5 | — |
| 7903 90 00 | – Other | 2,5 | — |
| 7904 00 00 | Zinc bars, rods, profiles and wire | 5 | — |
| 7905 00 00 | Zinc plates, sheets, strip and foil | 5 | — |
| [7906 ] | |||
| 7907 00 00 | Other articles of zinc | 5 | — |
CHAPTER 80
TIN AND ARTICLES THEREOF
Subheading note
-
- In this chapter, the following expressions have the meanings hereby assigned to them:
- (a) Tin, not alloyed:
Metal containing by weight at least 99 % of tin, provided that the content by weight of any bismuth or copper is less than the limit specified in the following table:
Other elements
| Element | Element | Limiting content % by weight |
|---|---|---|
| Bi | Bismuth | 0,1 |
| Cu | Copper | 0,4 |
- (b) Tin alloys:
Metallic substances in which tin predominates by weight over each of the other elements, provided that:
- (1) the total content by weight of such other elements exceeds 1 %, or
- (2) the content by weight of either bismuth or copper is equal to or greater than the limit specified in the foregoing table.
| CN code | Description | Conventional rate of duty (%) | Supplementary unit |
|---|---|---|---|
| 1 | 2 | 3 | 4 |
| 8001 | Unwrought tin: | ||
| 8001 10 00 | – Tin, not alloyed | Free | — |
| 8001 20 00 | – Tin alloys | Free | — |
| 8002 00 00 | Tin waste and scrap | Free | — |
| 8003 00 00 | Tin bars, rods, profiles and wire | Free | — |
| [8004 ] | |||
| [8005 ] | |||
| [8006 ] | |||
| 8007 00 | Other articles of tin: | ||
| 8007 00 10 | – Plates, sheets and strip, of a thickness exceeding 0,2 mm | Free | — |
| 8007 00 80 | – Other | Free | — |
CHAPTER 81
OTHER BASE METALS; CERMETS; ARTICLES THEREOF
| CN code | Description | Conventional rate of duty (%) | Supplementary unit |
|---|---|---|---|
| 1 | 2 | 3 | 4 |
| 8101 | Tungsten (wolfram) and articles thereof, including waste and scrap: | ||
| 8101 10 00 | – Powders | 5 | — |
| – Other: | |||
| 8101 94 00 | – – Unwrought tungsten, including bars and rods obtained simply by sintering | 5 | — |
| 8101 96 00 | – – Wire | 6 | — |
| 8101 97 00 | – – Waste and scrap | Free | — |
| 8101 99 | – – Other: | ||
| 8101 99 10 | – – – Bars and rods, other than those obtained simply by sintering, profiles, plates, sheets, strip and foil | 6 | — |
| 8101 99 90 | – – – Other | 7 | — |
| 8102 | Molybdenum and articles thereof, including waste and scrap: | ||
| 8102 10 00 | – Powders | 4 | — |
| – Other: | |||
| 8102 94 00 | – – Unwrought molybdenum, including bars and rods obtained simply by sintering | 3 | — |
| 8102 95 00 | – – Bars and rods, other than those obtained simply by sintering, profiles, plates, sheets, strip and foil | 5 | — |
| 8102 96 00 | – – Wire | 6,1 | — |
| 8102 97 00 | – – Waste and scrap | Free | — |
| 8102 99 00 | – – Other | 7 | — |
| 8103 | Tantalum and articles thereof, including waste and scrap: | ||
| 8103 20 00 | – Unwrought tantalum, including bars and rods obtained simply by sintering; powders | Free | — |
| 8103 30 00 | – Waste and scrap | Free | — |
| – Other: | |||
| 8103 91 00 | – – Crucibles | 4 | — |
| 8103 99 | – – Other: | ||
| 8103 99 10 | – – – Bars and rods, other than those obtained simply by sintering, profiles, wire, plates, sheets, strip and foil | 3 | — |
| 8103 99 90 | – – – Other | 4 | — |
| 8104 | Magnesium and articles thereof, including waste and scrap: | ||
| – Unwrought magnesium: | |||
| 8104 11 00 | – – Containing at least 99,8 % by weight of magnesium | 5,3 | — |
| 8104 19 00 | – – Other | 4 | — |
| 8104 20 00 | – Waste and scrap | Free | — |
| 8104 30 00 | – Raspings, turnings and granules, graded according to size; powders | 4 | — |
| 8104 90 00 | – Other | 4 | — |
| 8105 | Cobalt mattes and other intermediate products of cobalt metallurgy; cobalt and articles thereof, including waste and scrap: | ||
| 8105 20 00 | – Cobalt mattes and other intermediate products of cobalt metallurgy; unwrought cobalt; powders | Free | — |
| 8105 30 00 | – Waste and scrap | Free | — |
| 8105 90 00 | – Other | 3 | — |
| 8106 | Bismuth and articles thereof, including waste and scrap: | ||
| 8106 10 | – Containing more than 99,99 % of bismuth, by weight: | ||
| 8106 10 10 | – – Unwrought bismuth; waste and scrap; powders | Free | — |
| 8106 10 90 | – – Other | 2 | — |
| 8106 90 | – Other: | ||
| 8106 90 10 | – – Unwrought bismuth; waste and scrap; powders | Free | — |
| 8106 90 90 | – – Other | 2 | — |
| [8107 ] | |||
| 8108 | Titanium and articles thereof, including waste and scrap: | ||
| 8108 20 00 | – Unwrought titanium; powders | 5 | — |
| 8108 30 00 | – Waste and scrap | 5 | — |
| 8108 90 | – Other: | ||
| 8108 90 30 | – – Bars, rods, profiles and wire | 7 | — |
| 8108 90 50 | – – Plates, sheets, strip and foil | 7 | — |
| 8108 90 60 | – – Tubes and pipes | 7 | — |
| 8108 90 90 | – – Other | 7 | — |
| 8109 | Zirconium and articles thereof, including waste and scrap: | ||
| – Unwrought zirconium; powders: | |||
| 8109 21 00 | – – Containing less than 1 part hafnium to 500 parts zirconium by weight | 5 | — |
| 8109 29 00 | – – Other | 5 | — |
| – Waste and scrap: | |||
| 8109 31 00 | – – Containing less than 1 part hafnium to 500 parts zirconium by weight | Free | — |
| 8109 39 00 | – – Other | Free | — |
| – Other: | |||
| 8109 91 00 | – – Containing less than 1 part hafnium to 500 part zirconium by weight | 9 | — |
| 8109 99 00 | – – Other | 9 | — |
| 8110 | Antimony and articles thereof, including waste and scrap: | ||
| 8110 10 00 | – Unwrought antimony; powders | 7 | — |
| 8110 20 00 | – Waste and scrap | Free | — |
| 8110 90 00 | – Other | 7 | — |
| 8111 00 | Manganese and articles thereof, including waste and scrap: | ||
| – Unwrought manganese; waste and scrap; powders: | |||
| 8111 00 11 | – – Unwrought manganese; powders | Free | — |
| 8111 00 19 | – – Waste and scrap | Free | — |
| 8111 00 90 | – Other | 5 | — |
| 8112 | Beryllium, chromium, hafnium, rhenium, thallium, cadmium, germanium, vanadium, gallium, indium and niobium (columbium), and articles of these metals, including waste and scrap: | ||
| – Beryllium: | |||
| 8112 12 00 | – – Unwrought; powders | Free | — |
| 8112 13 00 | – – Waste and scrap | Free | — |
| 8112 19 00 | – – Other | 3 | — |
| – Chromium: | |||
| 8112 21 | – – Unwrought; powders: | ||
| 8112 21 10 | – – – Alloys containing more than 10 % by weight of nickel | Free | — |
| 8112 21 90 | – – – Other | 3 | — |
| 8112 22 00 | – – Waste and scrap | Free | — |
| 8112 29 00 | – – Other | 5 | — |
| – Hafnium: | |||
| 8112 31 00 | – – Unwrought; waste and scrap; powders | 3 | — |
| 8112 39 00 | – – Other | 7 | — |
| – Rhenium: | |||
| 8112 41 | – – Unwrought; waste and scrap; powders: | ||
| 8112 41 10 | – – – Waste and scrap | Free | — |
| 8112 41 90 | – – – Other | 3 | — |
| 8112 49 00 | – – Other | 9 | — |
| – Thallium: | |||
| 8112 51 00 | – – Unwrought; powders | 1,5 | — |
| 8112 52 00 | – – Waste and scrap | Free | — |
| 8112 59 00 | – – Other | 3 | — |
| – Cadmium: | |||
| 8112 61 00 | – – Waste and scrap | Free | — |
| 8112 69 | – – Other: | ||
| 8112 69 10 | – – – Unwrought cadmium; powders | 3 | — |
| 8112 69 90 | – – – Other | 4 | — |
| – Other: | |||
| 8112 92 | – – Unwrought; waste and scrap; powders: | ||
| 8112 92 21 | – – – Waste and scrap | Free | — |
| – – – Other: | |||
| 8112 92 40 | – – – – Niobium (columbium) | 3 | — |
| 8112 92 81 | – – – – Indium | 2 | — |
| 8112 92 89 | – – – – Gallium | 1,5 | — |
| 8112 92 91 | – – – – Vanadium | Free | — |
| 8112 92 95 | – – – – Germanium | 4,5 | — |
| 8112 99 | – – Other: | ||
| 8112 99 40 | – – – Germanium | 7 | — |
| 8112 99 50 | – – – Niobium (columbium) | 9 | — |
| 8112 99 70 | – – – Gallium; indium; vanadium | 3 | — |
| 8113 00 | Cermets and articles thereof, including waste and scrap: | ||
| 8113 00 20 | – Unwrought | 4 | — |
| 8113 00 40 | – Waste and scrap | Free | — |
| 8113 00 90 | – Other | 5 | — |
CHAPTER 82
TOOLS, IMPLEMENTS, CUTLERY, SPOONS AND FORKS, OF BASE METAL; PARTS THEREOF OF BASE METAL
Notes
-
- Apart from blowlamps, portable forges, grinding wheels with frameworks, manicure and pedicure sets, and goods of heading 8209 , this chapter covers only articles with a blade, working edge, working surface or other working part of:
- (a) base metal;
- (b) metal carbides or cermets;
- (c) precious or semi-precious stones (natural, synthetic or reconstructed) on a support of base metal, metal carbide or cermet; or
- (d) abrasive materials on a support of base metal, provided that the articles have cutting teeth, flutes, grooves, or the like, of base metal, which retain their identity and function after the application of the abrasive.
-
- Parts of base metal of the articles of this chapter are to be classified with the articles of which they are parts, except parts separately specified as such and tool-holders for hand tools (heading 8466 ). However, parts of general use as defined in note 2 to Section XV are in all cases excluded from this chapter.
Heads, blades and cutting plates for electric shavers or electric hair clippers are to be classified in heading 8510 .
-
- Sets consisting of one or more knives of heading 8211 and at least an equal number of articles of heading 8215 are to be classified in heading 8215 .
Reading this document does not replace reading the official text published in the Official Journal of the European Union. We assume no responsibility for any inaccuracies arising from the conversion of the original to this format.
This text is published under EUR-Lex's own terms of reuse, not a Legalize or public-domain licence.
EUR-Lex
Creative Commons Attribution 4.0 International (CC BY 4.0)
© European Union, https://eur-lex.europa.eu — Source: EUR-Lex (Publications Office of the European Union). Reused under the Creative Commons Attribution 4.0 International (CC BY 4.0) licence. Only EU legislation published in the printed Official Journal of the European Union is deemed authentic; consolidated texts are reproduced here for documentation purposes and have been reformatted to Markdown.