LegalizeCommission Implementing Regulation (EU) 2025/1926 of 22 September 2025 amending Annex I to Council Regulation (EEC) No 2658/87 on the tariff and statistical nomenclature and on the Common Customs Tariff
This is the act as published. Later amendments are not folded into the text below: each one is a separate act in this repository and an entry in this law's history.
| CN code | Description | Conventional rate of duty (%) | Supplementary unit |
|---|---|---|---|
| 1 | 2 | 3 | 4 |
| 8201 | Hand tools, the following: spades, shovels, mattocks, picks, hoes, forks and rakes; axes, billhooks and similar hewing tools; secateurs and pruners of any kind; scythes, sickles, hay knives, hedge shears, timber wedges and other tools of a kind used in agriculture, horticulture or forestry: | ||
| 8201 10 00 | – Spades and shovels | 1,7 | p/st |
| 8201 30 00 | – Mattocks, picks, hoes and rakes | 1,7 | — |
| 8201 40 00 | – Axes, billhooks and similar hewing tools | 1,7 | — |
| 8201 50 00 | – Secateurs and similar one-handed pruners and shears (including poultry shears) | 1,7 | p/st |
| 8201 60 00 | – Hedge shears, two-handed pruning shears and similar two-handed shears | 1,7 | — |
| 8201 90 00 | – Other hand tools of a kind used in agriculture, horticulture or forestry | 1,7 | — |
| 8202 | Handsaws; blades for saws of all kinds (including slitting, slotting or toothless saw blades): | ||
| 8202 10 00 | – Handsaws | 1,7 | — |
| 8202 20 00 | – Bandsaw blades | 1,7 | — |
| – Circular saw blades (including slitting or slotting saw blades): | |||
| 8202 31 00 | – – With working part of steel | 2,7 | — |
| 8202 39 00 | – – Other, including parts | 2,7 | — |
| 8202 40 00 | – Chainsaw blades | 1,7 | — |
| – Other saw blades: | |||
| 8202 91 00 | – – Straight saw blades, for working metal | 2,7 | — |
| 8202 99 | – – Other: | ||
| 8202 99 20 | – – – For working metal | 2,7 | — |
| 8202 99 80 | – – – For working other materials | 2,7 | — |
| 8203 | Files, rasps, pliers (including cutting pliers), pincers, tweezers, metal-cutting shears, pipe-cutters, bolt croppers, perforating punches and similar hand tools: | ||
| 8203 10 00 | – Files, rasps and similar tools | 1,7 | — |
| 8203 20 00 | – Pliers (including cutting pliers), pincers, tweezers and similar tools | 1,7 | — |
| 8203 30 00 | – Metal-cutting shears and similar tools | 1,7 | — |
| 8203 40 00 | – Pipe-cutters, bolt croppers, perforating punches and similar tools | 1,7 | — |
| 8204 | Hand-operated spanners and wrenches (including torque meter wrenches but not including tap wrenches); interchangeable spanner sockets, with or without handles: | ||
| – Hand-operated spanners and wrenches: | |||
| 8204 11 00 | – – Non-adjustable | 1,7 | — |
| 8204 12 00 | – – Adjustable | 1,7 | — |
| 8204 20 00 | – Interchangeable spanner sockets, with or without handles | 1,7 | — |
| 8205 | Hand tools (including glaziers' diamonds), not elsewhere specified or included; blowlamps; vices, clamps and the like, other than accessories for and parts of machine-tools or water-jet cutting machines; anvils; portable forges; hand- or pedal-operated grinding wheels with frameworks: | ||
| 8205 10 00 | – Drilling, threading or tapping tools | 1,7 | — |
| 8205 20 00 | – Hammers and sledge hammers | 3,7 | — |
| 8205 30 00 | – Planes, chisels, gouges and similar cutting tools for working wood | 3,7 | — |
| 8205 40 00 | – Screwdrivers | 3,7 | — |
| – Other hand tools (including glaziers' diamonds): | |||
| 8205 51 00 | – – Household tools | 3,7 | — |
| 8205 59 | – – Other: | ||
| 8205 59 10 | – – – Tools for masons, moulders, cement workers, plasterers and painters | 3,7 | — |
| 8205 59 80 | – – – Other | 2,7 | — |
| 8205 60 00 | – Blowlamps | 2,7 | — |
| 8205 70 00 | – Vices, clamps and the like | 3,7 | — |
| 8205 90 | – Other, including sets of articles of two or more subheadings of this heading: | ||
| 8205 90 10 | – – Anvils; portable forges; hand- or pedal-operated grinding wheels with frameworks | 2,7 | — |
| 8205 90 90 | – – Sets of articles of two or more subheadings of this heading | 3,7 | — |
| 8206 00 00 | Tools of two or more of headings 8202 to 8205 , put up in sets for retail sale | 3,7 | — |
| 8207 | Interchangeable tools for hand tools, whether or not power-operated, or for machine tools (for example, for pressing, stamping, punching, tapping, threading, drilling, boring, broaching, milling, turning or screw driving), including dies for drawing or extruding metal, and rock-drilling or earth-boring tools: | ||
| – Rock-drilling or earth-boring tools: | |||
| 8207 13 00 | – – With working part of cermets | 2,7 | — |
| 8207 19 | – – Other, including parts: | ||
| 8207 19 10 | – – – With working part of diamond or agglomerated diamond | 2,7 | — |
| 8207 19 90 | – – – Other | 2,7 | — |
| 8207 20 | – Dies for drawing or extruding metal: | ||
| 8207 20 10 | – – With working part of diamond or agglomerated diamond | 2,7 | — |
| 8207 20 90 | – – With working part of other materials | 2,7 | — |
| 8207 30 | – Tools for pressing, stamping or punching: | ||
| 8207 30 10 | – – For working metal | 2,7 | — |
| 8207 30 90 | – – Other | 2,7 | — |
| 8207 40 | – Tools for tapping or threading: | ||
| – – For working metal: | |||
| 8207 40 10 | – – – Tools for tapping | 2,7 | — |
| 8207 40 30 | – – – Tools for threading | 2,7 | — |
| 8207 40 90 | – – Other | 2,7 | — |
| 8207 50 | – Tools for drilling, other than for rock-drilling: | ||
| 8207 50 10 | – – With working part of diamond or agglomerated diamond | 2,7 | — |
| – – With working part of other materials: | |||
| 8207 50 30 | – – – Masonry drills | 2,7 | — |
| – – – Other: | |||
| – – – – For working metal, with working part: | |||
| 8207 50 50 | – – – – – Of cermets | 2,7 | — |
| 8207 50 60 | – – – – – Of high speed steel | 2,7 | — |
| 8207 50 70 | – – – – – Of other materials | 2,7 | — |
| 8207 50 90 | – – – – Other | 2,7 | — |
| 8207 60 | – Tools for boring or broaching: | ||
| 8207 60 10 | – – With working part of diamond or agglomerated diamond | 2,7 | — |
| – – With working part of other materials: | |||
| – – – Tools for boring: | |||
| 8207 60 30 | – – – – For working metal | 2,7 | — |
| 8207 60 50 | – – – – Other | 2,7 | — |
| – – – Tools for broaching: | |||
| 8207 60 70 | – – – – For working metal | 2,7 | — |
| 8207 60 90 | – – – – Other | 2,7 | — |
| 8207 70 | – Tools for milling: | ||
| – – For working metal, with working part: | |||
| 8207 70 10 | – – – Of cermets | 2,7 | — |
| – – – Of other materials: | |||
| 8207 70 31 | – – – – Shank type | 2,7 | — |
| 8207 70 37 | – – – – Other | 2,7 | — |
| 8207 70 90 | – – Other | 2,7 | — |
| 8207 80 | – Tools for turning: | ||
| – – For working metal, with working part: | |||
| 8207 80 11 | – – – Of cermets | 2,7 | — |
| 8207 80 19 | – – – Of other materials | 2,7 | — |
| 8207 80 90 | – – Other | 2,7 | — |
| 8207 90 | – Other interchangeable tools: | ||
| 8207 90 10 | – – With working part of diamond or agglomerated diamond | 2,7 | — |
| – – With working part of other materials: | |||
| 8207 90 30 | – – – Screwdriver bits | 2,7 | — |
| 8207 90 50 | – – – Gear-cutting tools | 2,7 | — |
| – – – Other, with working part: | |||
| – – – – Of cermets: | |||
| 8207 90 71 | – – – – – For working metal | 2,7 | — |
| 8207 90 78 | – – – – – Other | 2,7 | — |
| – – – – Of other materials: | |||
| 8207 90 91 | – – – – – For working metal | 2,7 | — |
| 8207 90 99 | – – – – – Other | 2,7 | — |
| 8208 | Knives and cutting blades, for machines or for mechanical appliances: | ||
| 8208 10 00 | – For metalworking | 1,7 | — |
| 8208 20 00 | – For woodworking | 1,7 | — |
| 8208 30 00 | – For kitchen appliances or for machines used by the food industry | 1,7 | — |
| 8208 40 00 | – For agricultural, horticultural or forestry machines | 1,7 | — |
| 8208 90 00 | – Other | 1,7 | — |
| 8209 00 | Plates, sticks, tips and the like for tools, unmounted, of cermets: | ||
| 8209 00 20 | – Indexable inserts | 2,7 | — |
| 8209 00 80 | – Other | 2,7 | — |
| 8210 00 00 | Hand-operated mechanical appliances, weighing 10 kg or less, used in the preparation, conditioning or serving of food or drink | 2,7 | — |
| 8211 | Knives with cutting blades, serrated or not (including pruning knives), other than knives of heading 8208 , and blades therefor: | ||
| 8211 10 00 | – Sets of assorted articles | 8,5 | — |
| – Other: | |||
| 8211 91 00 | – – Table knives having fixed blades | 8,5 | — |
| 8211 92 00 | – – Other knives having fixed blades | 8,5 | — |
| 8211 93 00 | – – Knives having other than fixed blades | 8,5 | — |
| 8211 94 00 | – – Blades | 6,7 | — |
| 8211 95 00 | – – Handles of base metal | 2,7 | — |
| 8212 | Razors and razor blades (including razor blade blanks in strips): | ||
| 8212 10 | – Razors: | ||
| 8212 10 10 | – – Safety razors with non-replaceable blades | 2,7 | p/st |
| 8212 10 90 | – – Other | 2,7 | p/st |
| 8212 20 00 | – Safety razor blades, including razor blade blanks in strips | 2,7 | 1 000 p/st |
| 8212 90 00 | – Other parts | 2,7 | — |
| 8213 00 00 | Scissors, tailors' shears and similar shears, and blades therefor | 4,2 | — |
| 8214 | Other articles of cutlery (for example, hair clippers, butchers' or kitchen cleavers, choppers and mincing knives, paperknives); manicure or pedicure sets and instruments (including nail files): | ||
| 8214 10 00 | – Paperknives, letter openers, erasing knives, pencil sharpeners and blades therefor | 2,7 | — |
| 8214 20 00 | – Manicure or pedicure sets and instruments (including nail files) | 2,7 | — |
| 8214 90 00 | – Other | 2,7 | — |
| 8215 | Spoons, forks, ladles, skimmers, cake-servers, fish-knives, butter-knives, sugar tongs and similar kitchen or tableware: | ||
| 8215 10 | – Sets of assorted articles containing at least one article plated with precious metal: | ||
| 8215 10 20 | – – Containing only articles plated with precious metal | 4,7 | — |
| – – Other: | |||
| 8215 10 30 | – – – Of stainless steel | 8,5 | — |
| 8215 10 80 | – – – Other | 4,7 | — |
| 8215 20 | – Other sets of assorted articles: | ||
| 8215 20 10 | – – Of stainless steel | 8,5 | — |
| 8215 20 90 | – – Other | 4,7 | — |
| – Other: | |||
| 8215 91 00 | – – Plated with precious metal | 4,7 | — |
| 8215 99 | – – Other: | ||
| 8215 99 10 | – – – Of stainless steel | 8,5 | — |
| 8215 99 90 | – – – Other | 4,7 | — |
CHAPTER 83
MISCELLANEOUS ARTICLES OF BASE METAL
Notes
-
- For the purposes of this chapter, parts of base metal are to be classified with their parent articles. However, articles of iron or steel of heading 7312 , 7315 , 7317 , 7318 or 7320 , or similar articles of other base metal (Chapters 74 to 76 and 78 to 81) are not to be taken as parts of articles of this chapter.
-
- For the purposes of heading 8302 , the word ‘castors’ means those having a diameter (including, where appropriate, tyres) not exceeding 75 mm, or those having a diameter (including, where appropriate, tyres) exceeding 75 mm provided that the width of the wheel or tyre fitted thereto is less than 30 mm.
| CN code | Description | Conventional rate of duty (%) | Supplementary unit |
|---|---|---|---|
| 1 | 2 | 3 | 4 |
| 8301 | Padlocks and locks (key, combination or electrically operated), of base metal; clasps and frames with clasps, incorporating locks, of base metal; keys for any of the foregoing articles, of base metal: | ||
| 8301 10 00 | – Padlocks | 2,7 | — |
| 8301 20 00 | – Locks of a kind used for motor vehicles | 2,7 | — |
| 8301 30 00 | – Locks of a kind used for furniture | 2,7 | — |
| 8301 40 | – Other locks: | ||
| – – Locks of a kind used for doors of buildings: | |||
| 8301 40 11 | – – – Cylinder | 2,7 | — |
| 8301 40 19 | – – – Other | 2,7 | — |
| 8301 40 90 | – – Other locks | 2,7 | — |
| 8301 50 00 | – Clasps and frames with clasps, incorporating locks | 2,7 | — |
| 8301 60 00 | – Parts | 2,7 | — |
| 8301 70 00 | – Keys presented separately | 2,7 | — |
| 8302 | Base-metal mountings, fittings and similar articles suitable for furniture, doors, staircases, windows, blinds, coachwork, saddlery, trunks, chests, caskets or the like; base-metal hat-racks, hat-pegs, brackets and similar fixtures; castors with mountings of base metal; automatic door closers of base metal: | ||
| 8302 10 00 | – Hinges | 2,7 | — |
| 8302 20 00 | – Castors | 2,7 | — |
| 8302 30 00 | – Other mountings, fittings and similar articles suitable for motor vehicles | 2,7 | — |
| – Other mountings, fittings and similar articles: | |||
| 8302 41 | – – Suitable for buildings: | ||
| 8302 41 10 | – – – For doors | 2,7 | — |
| 8302 41 50 | – – – For windows and French windows | 2,7 | — |
| 8302 41 90 | – – – Other | 2,7 | — |
| 8302 42 00 | – – Other, suitable for furniture | 2,7 | — |
| 8302 49 00 | – – Other | 2,7 | — |
| 8302 50 00 | – Hat-racks, hat-pegs, brackets and similar fixtures | 2,7 | — |
| 8302 60 00 | – Automatic door closers | 2,7 | — |
| 8303 00 | Armoured or reinforced safes, strongboxes and doors and safe deposit lockers for strong-rooms, cash or deed boxes and the like, of base metal: | ||
| 8303 00 40 | – Armoured or reinforced safes, strongboxes and doors and safe deposit lockers for strongrooms | 2,7 | — |
| 8303 00 90 | – Cash or deed boxes and the like | 2,7 | — |
| 8304 00 00 | Filing cabinets, card-index cabinets, paper trays, paper rests, pen trays, office-stamp stands and similar office or desk equipment, of base metal, other than office furniture of heading 9403 | 2,7 | — |
| 8305 | Fittings for loose-leaf binders or files, letter clips, letter corners, paper clips, indexing tags and similar office articles, of base metal; staples in strips (for example, for offices, upholstery, packaging), of base metal: | ||
| 8305 10 00 | – Fittings for loose-leaf binders or files | 2,7 | — |
| 8305 20 00 | – Staples in strips | 2,7 | — |
| 8305 90 00 | – Other, including parts | 2,7 | — |
| 8306 | Bells, gongs and the like, non-electric, of base metal; statuettes and other ornaments, of base metal; photograph, picture or similar frames, of base metal; mirrors of base metal: | ||
| 8306 10 00 | – Bells, gongs and the like | Free | — |
| – Statuettes and other ornaments: | |||
| 8306 21 00 | – – Plated with precious metal | Free | — |
| 8306 29 00 | – – Other | Free | — |
| 8306 30 00 | – Photograph, picture or similar frames; mirrors | 2,7 | — |
| 8307 | Flexible tubing of base metal, with or without fittings: | ||
| 8307 10 00 | – Of iron or steel | 2,7 | — |
| 8307 90 00 | – Of other base metal | 2,7 | — |
| 8308 | Clasps, frames with clasps, buckles, buckle-clasps, hooks, eyes, eyelets and the like, of base metal, of a kind used for clothing or clothing accessories, footwear, jewellery, wrist watches, books, awnings, leather goods, travel goods or saddlery or for other made up articles; tubular or bifurcated rivets, of base metal; beads and spangles, of base metal: | ||
| 8308 10 00 | – Hooks, eyes and eyelets | 2,7 | — |
| 8308 20 00 | – Tubular or bifurcated rivets | 2,7 | — |
| 8308 90 00 | – Other, including parts | 2,7 | — |
| 8309 | Stoppers, caps and lids (including crown corks, screw caps and pouring stoppers), capsules for bottles, threaded bungs, bung covers, seals and other packing accessories, of base metal: | ||
| 8309 10 00 | – Crown corks | 2,7 | — |
| 8309 90 | – Other: | ||
| 8309 90 10 | – – Capsules of lead, for bottles; capsules of aluminium, of a diameter exceeding 21 mm, for bottles | 3,7 | — |
| 8309 90 90 | – – Other | 2,7 | — |
| 8310 00 00 | Sign-plates, nameplates, address-plates and similar plates, numbers, letters and other symbols, of base metal, excluding those of heading 9405 | 2,7 | — |
| 8311 | Wire, rods, tubes, plates, electrodes and similar products, of base metal or of metal carbides, coated or cored with flux material, of a kind used for soldering, brazing, welding or deposition of metal or of metal carbides; wire and rods, of agglomerated base metal powder, used for metal spraying: | ||
| 8311 10 00 | – Coated electrodes of base metal, for electric arc-welding | 2,7 | — |
| 8311 20 00 | – Cored wire of base metal, for electric arc-welding | 2,7 | — |
| 8311 30 00 | – Coated rods and cored wire, of base metal, for soldering, brazing or welding by flame | 2,7 | — |
| 8311 90 00 | – Other | 2,7 | — |
SECTION XVI
MACHINERY AND MECHANICAL APPLIANCES; ELECTRICAL EQUIPMENT; PARTS THEREOF; SOUND RECORDERS AND REPRODUCERS, TELEVISION IMAGE AND SOUND RECORDERS AND REPRODUCERS, AND PARTS AND ACCESSORIES OF SUCH ARTICLES
Notes
-
- This section does not cover:
- (a) transmission or conveyor belts or belting, of plastics of Chapter 39, or of vulcanised rubber (heading 4010 ), or other articles of a kind used in machinery or mechanical or electrical appliances or for other technical uses, of vulcanised rubber other than hard rubber (heading 4016 );
- (b) articles of leather or of composition leather (heading 4205 ) or of furskin (heading 4303 ), of a kind used in machinery or mechanical appliances or for other technical uses;
- (c) bobbins, spools, cops, cones, cores, reels or similar supports, of any material (for example, Chapter 39, 40, 44 or 48 or Section XV);
- (d) perforated cards for jacquard or similar machines (for example, Chapter 39 or 48 or Section XV);
- (e) transmission or conveyor belts or belting, of textile material (heading 5910 ) or other articles of textile material for technical uses (heading 5911 );
- (f) precious or semi-precious stones (natural, synthetic or reconstructed) of headings 7102 to 7104 , or articles wholly of such stones of heading 7116 , except unmounted worked sapphires and diamonds for styli (heading 8522 );
- (g) parts of general use, as defined in note 2 to Section XV, of base metal (Section XV), or similar goods of plastics (Chapter 39);
- (h) drill pipe (heading 7304 );
- (ij) endless belts of metal wire or strip (Section XV);
- (k) articles of Chapter 82 or 83;
- (l) articles of Section XVII;
- (m) articles of Chapter 90;
- (n) clocks, watches or other articles of Chapter 91;
- (o) interchangeable tools of heading 8207 or brushes of a kind used as parts of machines (heading 9603 ); similar interchangeable tools are to be classified according to the constituent material of their working part (for example, in Chapter 40, 42, 43, 45 or 59 or heading 6804 or 6909 );
- (p) articles of Chapter 95; or
- (q) typewriter or similar ribbons, whether or not on spools or in cartridges (classified according to their constituent material, or in heading 9612 if inked or otherwise prepared for giving impressions), or monopods, bipods, tripods and similar articles, of heading 9620 .
-
- Subject to note 1 to this section, note 1 to Chapter 84 and note 1 to Chapter 85, parts of machines (not being parts of the articles of heading 8484 , 8544 , 8545 , 8546 or 8547 ) are to be classified according to the following rules:
- (a) Parts which are goods included in any of the headings of Chapter 84 or 85 (other than headings 8409 , 8431 , 8448 , 8466 , 8473 , 8487 , 8503 , 8522 , 8529 , 8538 and 8548 ) are in all cases to be classified in their respective headings.
- (b) Other parts, if suitable for use solely or principally with a particular kind of machine, or with a number of machines of the same heading (including a machine of heading 8479 or 8543 ) are to be classified with the machines of that kind or in heading 8409 , 8431 , 8448 , 8466 , 8473 , 8503 , 8522 , 8529 or 8538 as appropriate. However, parts which are equally suitable for use principally with the goods of headings 8517 and 8525 to 8528 are to be classified in heading 8517 , and parts which are suitable for use solely or principally with the goods of heading 8524 are to be classified in heading 8529 ;
- (c) All other parts are to be classified in heading 8409 , 8431 , 8448 , 8466 , 8473 , 8503 , 8522 , 8529 or 8538 as appropriate or, failing that, in heading 8487 or 8548 .
-
- Unless the context otherwise requires, composite machines consisting of two or more machines fitted together to form a whole and other machines designed for the purpose of performing two or more complementary or alternative functions are to be classified as if consisting only of that component or as being that machine which performs the principal function.
-
- Where a machine (including a combination of machines) consists of individual components (whether separate or interconnected by piping, by transmission devices, by electric cables or by other devices) intended to contribute together to a clearly defined function covered by one of the headings in Chapter 84 or 85, then the whole falls to be classified in the heading appropriate to that function.
-
- For the purposes of these notes, the expression ‘machine’ means any machine, machinery, plant, equipment, apparatus or appliance cited in the headings of Chapter 84 or 85.
-
- (A) Throughout the nomenclature, the expression ‘electrical and electronic waste and scrap’ means electrical and electronic assemblies, printed circuit boards, and electrical or electronic articles that: (a) have been rendered unusable for their original purposes by breakage, cutting-up or other processes or are economically unsuitable for repair, refurbishment or renovation to render them fit for their original purposes; and (b) are packaged or shipped in a manner not intended to protect individual articles from damage during transportation, loading and unloading operations. (B) Mixed consignments of ‘electrical and electronic waste and scrap’ and other waste and scrap are to be classified in heading 8549 . (C) This section does not cover municipal waste, as defined in note 4 to Chapter 38.
Additional notes
-
- Tools necessary for the assembly or maintenance of machines are to be classified with those machines if imported with them. Interchangeable tools imported with machines are also to be classified therewith if they form part of the normal equipment of the machines and are normally sold with them.
-
- Should the customs so require, the declarant shall produce, in support of his declaration, an illustrated document (for example, instructions, prospectus, a page from a catalogue, a photograph) giving the normal description of the machine, its uses and essential characteristics and, in respect of an unassembled or disassembled machine, an assembly plan and a list of the contents of the various packages.
-
- The provisions of general rule 2(a) are also applicable, at the request of the declarant and subject to conditions stipulated by the competent authorities, to machines imported in split consignments.
CHAPTER 84
NUCLEAR REACTORS, BOILERS, MACHINERY AND MECHANICAL APPLIANCES; PARTS THEREOF
Notes
-
- This chapter does not cover:
- (a) millstones, grindstones or other articles of Chapter 68;
- (b) machinery or appliances (for example, pumps) of ceramic material and ceramic parts of machinery or appliances of any material (Chapter 69);
- (c) laboratory glassware (heading 7017 ); machinery, appliances or other articles for technical uses or parts thereof, of glass (heading 7019 or 7020 );
- (d) articles of heading 7321 or 7322 or similar articles of other base metals (Chapters 74 to 76 or 78 to 81);
- (e) vacuum cleaners of heading 8508 ;
- (f) electromechanical domestic appliances of heading 8509 ; digital cameras of heading 8525 ;
- (g) radiators for the articles of Section XVII; or
- (h) hand-operated mechanical floor sweepers, not motorised (heading 9603 ).
-
- Subject to the operation of note 3 to Section XVI and subject to note 11 to this chapter, a machine or appliance which answers to a description in one or more of the headings 8401 to 8424 , or heading 8486 and at the same time to a description in one or more of the headings 8425 to 8480 is to be classified under the appropriate heading of the former group or under heading 8486 , as the case may be, and not the latter group.
- (A) Heading 8419 does not, however, cover:
- (a) germination plant, incubators or brooders (heading 8436 );
- (b) grain dampening machines (heading 8437 );
- (c) diffusing apparatus for sugar juice extraction (heading 8438 );
- (d) machinery for the heat-treatment of textile yarns, fabrics or made up textile articles (heading 8451 ); or
- (e) machinery, plant or laboratory equipment, designed for a mechanical operation, in which a change of temperature, even if necessary, is subsidiary.
- (B) Heading 8422 does not cover:
- (a) sewing machines for closing bags or similar containers (heading 8452 ); or
- (b) office machinery of heading 8472 .
- (C) Heading 8424 does not cover:
- (a) ink-jet printing machines (heading 8443 ); or
- (b) water-jet cutting machines (heading 8456 ).
-
- A machine tool for working any material which answers to a description in heading 8456 and at the same time to a description in heading 8457 , 8458 , 8459 , 8460 , 8461 , 8464 or 8465 is to be classified in heading 8456 .
-
- Heading 8457 applies only to machine tools for working metal, other than lathes (including turning centres), which can carry out different types of machining operations either:
- (a) by automatic tool change from a magazine or the like in conformity with a machining programme (machining centres);
- (b) by the automatic use, simultaneously or sequentially, of different unit heads working on a fixed position workpiece (unit construction machines, single station); or
- (c) by the automatic transfer of the workpiece to different unit heads (multi-station transfer machines).
-
- For the purposes of heading 8462 , a ‘slitting line’ for flat products is a processing line composed of an uncoiler, a coil flattener, a slitter and a recoiler. A ‘cut-to-length line’ for flat products is a processing line composed of an uncoiler, a coil flattener, and a shear.
-
- (A) For the purposes of heading 8471 , the expression ‘automatic data-processing machines’ means machines, capable of (1) storing the processing program or programs and at least the data immediately necessary for the execution of the program; (2) being freely programmed in accordance with the requirements of the user; (3) performing arithmetical computations specified by the user; and (4) executing, without human intervention, a processing program which requires them to modify their execution, by logical decision during the processing run. (B) Automatic data-processing machines may be in the form of systems consisting of a variable number of separate units. (C) Subject to paragraph (D) and (E) below, a unit is to be regarded as being a part of an automatic data-processing system if it meets all of the following conditions: (1) it is of a kind solely or principally used in an automatic data-processing system; (2) it is connectable to the central processing unit either directly or through one or more other units; and (3) it is able to accept or deliver data in a form (codes or signals) which can be used by the system. Separately presented units of an automatic data-processing machine are to be classified in heading 8471 . However keyboards, X-Y coordinate input devices and disk storage units which satisfy the conditions of paragraphs (C)(2) and (C)(3) above, are in all cases to be classified as units of heading 8471 . (D) Heading 8471 does not cover the following when presented separately, even if they meet all of the conditions set forth in note 6(C) above: (1) printers, copying machines, facsimile machines, whether or not combined; (2) apparatus for the transmission or reception of voice, images or other data, including apparatus for communication in a wired or wireless network (such as a local or wide area network); (3) loudspeakers and microphones; (4) television cameras, digital cameras and video camera recorders; (5) monitors and projectors, not incorporating television reception apparatus. (E) Machines incorporating or working in conjunction with an automatic data-processing machine and performing a specific function other than data processing are to be classified in the headings appropriate to their respective functions or, failing that, in residual headings.
-
- Heading 8482 applies, inter alia, to polished steel balls, the maximum and minimum diameters of which do not differ from the nominal diameter by more than 1 % or by more than 0,05 mm, whichever is less.
Other steel balls are to be classified in heading 7326 .
-
- A machine which is used for more than one purpose is, for the purposes of classification, to be treated as if its principal purpose were its sole purpose.
Subject to note 2 to this chapter and note 3 to Section XVI, a machine the principal purpose of which is not described in any heading or for which no one purpose is the principal purpose is, unless the context otherwise requires, to be classified in heading 8479 . Heading 8479 also covers machines for making rope or cable (for example, stranding, twisting or cabling machines) from metal wire, textile yarn or any other material or from a combination of such materials.
-
- For the purposes of heading 8470 , the term ‘pocket-size’ applies only to machines the dimensions of which do not exceed 170 mm × 100 mm × 45 mm.
-
- For the purposes of heading 8485 , the expression ‘additive manufacturing’ (also referred to as 3D printing) means the formation of physical objects, based on a digital model, by the successive addition and layering, and consolidation and solidification, of material (for example, metal, plastics or ceramics).
Subject to note 1 to Section XVI and note 1 to Chapter 84, machines answering to the description in heading 8485 are to be classified in that heading and in no other heading of the nomenclature.
-
- (A) Notes 12(a) and 12(b) to Chapter 85 also apply with respect to the expressions ‘semiconductor devices’ and ‘electronic integrated circuits’, respectively, as used in this note and in heading 8486 . However, for the purposes of this note and of heading 8486 , the expression ‘semiconductor devices’ also covers photosensitive semiconductor devices and light-emitting diodes (LED). (B) For the purposes of this note and of heading 8486 , the expression ‘manufacture of flat panel displays’ covers the fabrication of substrates into a flat panel. It does not cover the manufacture of glass or the assembly of printed circuit boards or other electronic components onto the flat panel. The expression ‘flat panel display’ does not cover cathode-ray tube technology. (C) Heading 8486 also includes machines and apparatus solely or principally of a kind used for: (1) the manufacture or repair of masks and reticles; (2) assembling semiconductor devices or electronic integrated circuits; (3) lifting, handling, loading or unloading of boules, wafers, semiconductor devices, electronic integrated circuits and flat panel displays. (D) Subject to note 1 to Section XVI and note 1 to Chapter 84, machines and apparatus answering to the description in heading 8486 are to be classified in that heading and in no other heading of the nomenclature.
Subheading notes
-
- For the purposes of subheading 8465 20 , the term ‘machining centres’ applies only to machine-tools for working wood, cork, bone, hard rubber, hard plastics or similar hard materials, which can carry out different types of machining operations by automatic tool change from a magazine or the like in conformity with a machining programme.
-
- For the purposes of subheading 8471 49 , the term ‘systems’ means automatic data-processing machines whose units satisfy the conditions laid down in note 6(C) to Chapter 84 and which comprise at least a central processing unit, one input unit (for example, a keyboard or a scanner), and one output unit (for example, a visual display unit or a printer).
-
- For the purposes of subheading 8481 20 , the expression ‘valves for oleohydraulic or pneumatic transmissions’ means valves which are used specifically in the transmission of ‘fluid power’ in a hydraulic or pneumatic system, where the energy source is supplied in the form of pressurized fluids (liquid or gas). These valves may be of any type (for example, pressure-reducing type, check type). Subheading 8481 20 takes precedence over all other subheadings of heading 8481 .
-
- Subheading 8482 40 applies only to bearings with cylindrical rollers of a uniform diameter not exceeding 5 mm and having a length which is at least three times the diameter. The ends of the rollers may be rounded.
Additional notes
-
- For the purposes of subheadings 8407 10 and 8409 10 , the expression ‘aircraft engines’ shall apply only to engines designed for fitting with an airscrew or rotor.
-
- Subheading 8471 70 30 shall also apply to CD-ROM drives, being storage units for automatic data-processing machines, which consist of drive units designed for retrieving the signals from CD-ROMs, audio CDs and photo CDs and equipped with a jack for earphones, a volume-control button or a start/stop button.
Reading this document does not replace reading the official text published in the Official Journal of the European Union. We assume no responsibility for any inaccuracies arising from the conversion of the original to this format.
This text is published under EUR-Lex's own terms of reuse, not a Legalize or public-domain licence.
EUR-Lex
Creative Commons Attribution 4.0 International (CC BY 4.0)
© European Union, https://eur-lex.europa.eu — Source: EUR-Lex (Publications Office of the European Union). Reused under the Creative Commons Attribution 4.0 International (CC BY 4.0) licence. Only EU legislation published in the printed Official Journal of the European Union is deemed authentic; consolidated texts are reproduced here for documentation purposes and have been reformatted to Markdown.