LegalizeCommission Implementing Regulation (EU) No 927/2012 of 9 October 2012 amending Annex I to Council Regulation (EEC) No 2658/87 on the tariff and statistical nomenclature and on the Common Customs Tariff
This is the act as published. Later amendments are not folded into the text below: each one is a separate act in this repository and an entry in this law's history.
| CN code | Description | Conventional rate of duty (%) | Supplementary unit |
| (1) | (2) | (3) | (4) |
| I. PRIMARY MATERIALS; PRODUCTS IN GRANULAR OR POWDER FORM | I. PRIMARY MATERIALS; PRODUCTS IN GRANULAR OR POWDER FORM | ||
| 7201 | Pig iron and spiegeleisen in pigs, blocks or other primary forms | ||
| 7201 10 | – Non-alloy pig iron containing by weight 0,5 % or less of phosphorus | ||
| – – Containing by weight not less than 0,4 % of manganese | |||
| 7201 10 11 | – – – Containing by weight 1 % or less of silicon | 1,7 | — |
| 7201 10 19 | – – – Containing by weight more than 1 % of silicon | 1,7 | — |
| 7201 10 30 | – – Containing by weight not less than 0,1 % but less than 0,4 % of manganese | 1,7 | — |
| 7201 10 90 | – – Containing by weight less than 0,1 % of manganese | Free | — |
| 7201 20 00 | – Non-alloy pig iron containing by weight more than 0,5 % of phosphorus | 2,2 | — |
| 7201 50 | – Alloy pig iron; spiegeleisen | ||
| 7201 50 10 | – – Alloy pig iron containing by weight not less than 0,3 % but not more than 1 % of titanium and not less than 0,5 % but not more than 1 % of vanadium | Free | — |
| 7201 50 90 | – – Other | 1,7 | — |
| 7202 | Ferro-alloys | ||
| – Ferro-manganese | |||
| 7202 11 | – – Containing by weight more than 2 % of carbon | ||
| 7202 11 20 | – – – With a granulometry not exceeding 5 mm and a manganese content by weight exceeding 65 % | 2,7 | — |
| 7202 11 80 | – – – Other | 2,7 | — |
| 7202 19 00 | – – Other | 2,7 | — |
| – Ferro-silicon | |||
| 7202 21 00 | – – Containing by weight more than 55 % of silicon | 5,7 11 | — |
| 7202 29 | – – Other | ||
| 7202 29 10 | – – – Containing by weight 4 % or more but not more than 10 % of magnesium | 5,7 11 | — |
| 7202 29 90 | – – – Other | 5,7 11 | — |
| 7202 30 00 | – Ferro-silico-manganese | 3,7 | — |
| – Ferro-chromium | |||
| 7202 41 | – – Containing by weight more than 4 % of carbon | ||
| 7202 41 10 | – – – Containing by weight more than 4 % but not more than 6 % of carbon | 4 | — |
| 7202 41 90 | – – – Containing by weight more than 6 % of carbon | 4 | — |
| 7202 49 | – – Other | ||
| 7202 49 10 | – – – Containing by weight not more than 0,05 % of carbon | 7 | — |
| 7202 49 50 | – – – Containing by weight more than 0,05 % but not more than 0,5 % of carbon | 7 | — |
| 7202 49 90 | – – – Containing by weight more than 0,5 % but not more than 4 % of carbon | 7 | — |
| 7202 50 00 | – Ferro-silico-chromium | 2,7 | — |
| 7202 60 00 | – Ferro-nickel | Free | — |
| 7202 70 00 | – Ferro-molybdenum | 2,7 | — |
| 7202 80 00 | – Ferro-tungsten and ferro-silico-tungsten | Free | — |
| – Other | |||
| 7202 91 00 | – – Ferro-titanium and ferro-silico-titanium | 2,7 | — |
| 7202 92 00 | – – Ferro-vanadium | 2,7 | — |
| 7202 93 00 | – – Ferro-niobium | Free | — |
| 7202 99 | – – Other | ||
| 7202 99 10 | – – – Ferro-phosphorus | Free | — |
| 7202 99 30 | – – – Ferro-silico-magnesium | 2,7 | — |
| 7202 99 80 | – – – Other | 2,7 | — |
| 7203 | Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99,94 %, in lumps, pellets or similar forms | ||
| 7203 10 00 | – Ferrous products obtained by direct reduction of iron ore | Free | — |
| 7203 90 00 | – Other | Free | — |
| 7204 | Ferrous waste and scrap; remelting scrap ingots of iron or steel | ||
| 7204 10 00 | – Waste and scrap of cast iron | Free | — |
| – Waste and scrap of alloy steel | |||
| 7204 21 | – – Of stainless steel | ||
| 7204 21 10 | – – – Containing by weight 8 % or more of nickel | Free | — |
| 7204 21 90 | – – – Other | Free | — |
| 7204 29 00 | – – Other | Free | — |
| 7204 30 00 | – Waste and scrap of tinned iron or steel | Free | — |
| – Other waste and scrap | |||
| 7204 41 | – – Turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundles | ||
| 7204 41 10 | – – – Turnings, shavings, chips, milling waste, sawdust and filings | Free | — |
| – – – Trimmings and stampings | |||
| 7204 41 91 | – – – – In bundles | Free | — |
| 7204 41 99 | – – – – Other | Free | — |
| 7204 49 | – – Other | ||
| 7204 49 10 | – – – Fragmentised (shredded) | Free | — |
| – – – Other | |||
| 7204 49 30 | – – – – In bundles | Free | — |
| 7204 49 90 | – – – – Other | Free | — |
| 7204 50 00 | – Remelting scrap ingots | Free | — |
| 7205 | Granules and powders, of pig iron, spiegeleisen, iron or steel | ||
| 7205 10 00 | – Granules | Free | — |
| – Powders | |||
| 7205 21 00 | – – Of alloy steel | Free | — |
| 7205 29 00 | – – Other | Free | — |
| II. IRON AND NON-ALLOY STEEL | II. IRON AND NON-ALLOY STEEL | ||
| 7206 | Iron and non-alloy steel in ingots or other primary forms (excluding iron of heading 7203 ) | ||
| 7206 10 00 | – Ingots | Free | — |
| 7206 90 00 | – Other | Free | — |
| 7207 | Semi-finished products of iron or non-alloy steel | ||
| – Containing by weight less than 0,25 % of carbon | |||
| 7207 11 | – – Of rectangular (including square) cross-section, the width measuring less than twice the thickness | ||
| – – – Rolled or obtained by continuous casting | |||
| 7207 11 11 | – – – – Of free-cutting steel | Free | — |
| – – – – Other | |||
| 7207 11 14 | – – – – – Of a thickness not exceeding 130 mm | Free | — |
| 7207 11 16 | – – – – – Of a thickness exceeding 130 mm | Free | — |
| 7207 11 90 | – – – Forged | Free | — |
| 7207 12 | – – Other, of rectangular (other than square) cross-section | ||
| 7207 12 10 | – – – Rolled or obtained by continuous casting | Free | — |
| 7207 12 90 | – – – Forged | Free | — |
| 7207 19 | – – Other | ||
| – – – Of circular or polygonal cross-section | |||
| 7207 19 12 | – – – – Rolled or obtained by continuous casting | Free | — |
| 7207 19 19 | – – – – Forged | Free | — |
| 7207 19 80 | – – – Other | Free | — |
| 7207 20 | – Containing by weight 0,25 % or more of carbon | ||
| – – Of rectangular (including square) cross-section, the width measuring less than twice the thickness | |||
| – – – Rolled or obtained by continuous casting | |||
| 7207 20 11 | – – – – Of free-cutting steel | Free | — |
| – – – – Other, containing by weight | |||
| 7207 20 15 | – – – – – 0,25 % or more but less than 0,6 % of carbon | Free | — |
| 7207 20 17 | – – – – – 0,6 % or more of carbon | Free | — |
| 7207 20 19 | – – – Forged | Free | — |
| – – Other, of rectangular (other than square) cross-section | |||
| 7207 20 32 | – – – Rolled or obtained by continuous casting | Free | — |
| 7207 20 39 | – – – Forged | Free | — |
| – – Of circular or polygonal cross-section | |||
| 7207 20 52 | – – – Rolled or obtained by continuous casting | Free | — |
| 7207 20 59 | – – – Forged | Free | — |
| 7207 20 80 | – – Other | Free | — |
| 7208 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated | ||
| 7208 10 00 | – In coils, not further worked than hot-rolled, with patterns in relief | Free | — |
| – Other, in coils, not further worked than hot-rolled, pickled | |||
| 7208 25 00 | – – Of a thickness of 4,75 mm or more | Free | — |
| 7208 26 00 | – – Of a thickness of 3 mm or more but less than 4,75 mm | Free | — |
| 7208 27 00 | – – Of a thickness of less than 3 mm | Free | — |
| – Other, in coils, not further worked than hot-rolled | |||
| 7208 36 00 | – – Of a thickness exceeding 10 mm | Free | — |
| 7208 37 00 | – – Of a thickness of 4,75 mm or more but not exceeding 10 mm | Free | — |
| 7208 38 00 | – – Of a thickness of 3 mm or more but less than 4,75 mm | Free | — |
| 7208 39 00 | – – Of a thickness of less than 3 mm | Free | — |
| 7208 40 00 | – Not in coils, not further worked than hot-rolled, with patterns in relief | Free | — |
| – Other, not in coils, not further worked than hot-rolled | |||
| 7208 51 | – – Of a thickness exceeding 10 mm | ||
| 7208 51 20 | – – – Of a thickness exceeding 15 mm | Free | — |
| – – – Of a thickness exceeding 10 mm but not exceeding 15 mm, of a width of | |||
| 7208 51 91 | – – – – 2 050 mm or more | Free | — |
| 7208 51 98 | – – – – Less than 2 050 mm | Free | — |
| 7208 52 | – – Of a thickness of 4,75 mm or more but not exceeding 10 mm | ||
| 7208 52 10 | – – – Rolled on four faces or in a closed box pass, of a width not exceeding 1 250 mm | Free | — |
| – – – Other, of a width of | |||
| 7208 52 91 | – – – – 2 050 mm or more | Free | — |
| 7208 52 99 | – – – – Less than 2 050 mm | Free | — |
| 7208 53 | – – Of a thickness of 3 mm or more but less than 4,75 mm | ||
| 7208 53 10 | – – – Rolled on four faces or in a closed box pass, of a width not exceeding 1 250 mm and of a thickness of 4 mm or more | Free | — |
| 7208 53 90 | – – – Other | Free | — |
| 7208 54 00 | – – Of a thickness of less than 3 mm | Free | — |
| 7208 90 | – Other | ||
| 7208 90 20 | – – Perforated | Free | — |
| 7208 90 80 | – – Other | Free | — |
| 7209 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated | ||
| – In coils, not further worked than cold-rolled (cold-reduced) | |||
| 7209 15 00 | – – Of a thickness of 3 mm or more | Free | — |
| 7209 16 | – – Of a thickness exceeding 1 mm but less than 3 mm | ||
| 7209 16 10 | – – – ‘Electrical’ | Free | — |
| 7209 16 90 | – – – Other | Free | — |
| 7209 17 | – – Of a thickness of 0,5 mm or more but not exceeding 1 mm | ||
| 7209 17 10 | – – – ‘Electrical’ | Free | — |
| 7209 17 90 | – – – Other | Free | — |
| 7209 18 | – – Of a thickness of less than 0,5 mm | ||
| 7209 18 10 | – – – ‘Electrical’ | Free | — |
| – – – Other | |||
| 7209 18 91 | – – – – Of a thickness of 0,35 mm or more but less than 0,5 mm | Free | — |
| 7209 18 99 | – – – – Of a thickness of less than 0,35 mm | Free | — |
| – Not in coils, not further worked than cold-rolled (cold-reduced) | |||
| 7209 25 00 | – – Of a thickness of 3 mm or more | Free | — |
| 7209 26 | – – Of a thickness exceeding 1 mm but less than 3 mm | ||
| 7209 26 10 | – – – ‘Electrical’ | Free | — |
| 7209 26 90 | – – – Other | Free | — |
| 7209 27 | – – Of a thickness of 0,5 mm or more but not exceeding 1 mm | ||
| 7209 27 10 | – – – ‘Electrical’ | Free | — |
| 7209 27 90 | – – – Other | Free | — |
| 7209 28 | – – Of a thickness of less than 0,5 mm | ||
| 7209 28 10 | – – – ‘Electrical’ | Free | — |
| 7209 28 90 | – – – Other | Free | — |
| 7209 90 | – Other | ||
| 7209 90 20 | – – Perforated | Free | — |
| 7209 90 80 | – – Other | Free | — |
| 7210 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated | ||
| – Plated or coated with tin | |||
| 7210 11 00 | – – Of a thickness of 0,5 mm or more | Free | — |
| 7210 12 | – – Of a thickness of less than 0,5 mm | ||
| 7210 12 20 | – – – Tinplate | Free | — |
| 7210 12 80 | – – – Other | Free | — |
| 7210 20 00 | – Plated or coated with lead, including terne-plate | Free | — |
| 7210 30 00 | – Electrolytically plated or coated with zinc | Free | — |
| – Otherwise plated or coated with zinc | |||
| 7210 41 00 | – – Corrugated | Free | — |
| 7210 49 00 | – – Other | Free | — |
| 7210 50 00 | – Plated or coated with chromium oxides or with chromium and chromium oxides | Free | — |
| – Plated or coated with aluminium | |||
| 7210 61 00 | – – Plated or coated with aluminium-zinc alloys | Free | — |
| 7210 69 00 | – – Other | Free | — |
| 7210 70 | – Painted, varnished or coated with plastics | ||
| 7210 70 10 | – – Tinplate, varnished; products, plated or coated with chromium oxides or with chromium and chromium oxides, varnished | Free | — |
| 7210 70 80 | – – Other | Free | — |
| 7210 90 | – Other | ||
| 7210 90 30 | – – Clad | Free | — |
| 7210 90 40 | – – Tinned and printed | Free | — |
| 7210 90 80 | – – Other | Free | — |
| 7211 | Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated | ||
| – Not further worked than hot-rolled | |||
| 7211 13 00 | – – Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief | Free | — |
| 7211 14 00 | – – Other, of a thickness of 4,75 mm or more | Free | — |
| 7211 19 00 | – – Other | Free | — |
| – Not further worked than cold-rolled (cold-reduced) | |||
| 7211 23 | – – Containing by weight less than 0,25 % of carbon | ||
| 7211 23 20 | – – – ‘Electrical’ | Free | — |
| – – – Other | |||
| 7211 23 30 | – – – – Of a thickness of 0,35 mm or more | Free | — |
| 7211 23 80 | – – – – Of a thickness of less than 0,35 mm | Free | — |
| 7211 29 00 | – – Other | Free | — |
| 7211 90 | – Other | ||
| 7211 90 20 | – – Perforated | Free | — |
| 7211 90 80 | – – Other | Free | — |
| 7212 | Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, clad, plated or coated | ||
| 7212 10 | – Plated or coated with tin | ||
| 7212 10 10 | – – Tinplate, not further worked than surface-treated | Free | — |
| 7212 10 90 | – – Other | Free | — |
| 7212 20 00 | – Electrolytically plated or coated with zinc | Free | — |
| 7212 30 00 | – Otherwise plated or coated with zinc | Free | — |
| 7212 40 | – Painted, varnished or coated with plastics | ||
| 7212 40 20 | – – Tinplate, not further worked than varnished; products, plated or coated with chromium oxides or with chromium and chromium oxides, varnished | Free | — |
| 7212 40 80 | – – Other | Free | — |
| 7212 50 | – Otherwise plated or coated | ||
| 7212 50 20 | – – Plated or coated with chromium oxides or with chromium and chromium oxides | Free | — |
| 7212 50 30 | – – Plated or coated with chromium or nickel | Free | — |
| 7212 50 40 | – – Plated or coated with copper | Free | — |
| – – Plated or coated with aluminium | |||
| 7212 50 61 | – – – Plated or coated with aluminium-zinc alloys | Free | — |
| 7212 50 69 | – – – Other | Free | — |
| 7212 50 90 | – – Other | Free | — |
| 7212 60 00 | – Clad | Free | — |
| 7213 | Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel | ||
| 7213 10 00 | – Containing indentations, ribs, grooves or other deformations produced during the rolling process | Free | — |
| 7213 20 00 | – Other, of free-cutting steel | Free | — |
| – Other | |||
| 7213 91 | – – Of circular cross-section measuring less than 14 mm in diameter | ||
| 7213 91 10 | – – – Of a type used for concrete reinforcement | Free | — |
| 7213 91 20 | – – – Of a type used for tyre cord | Free | — |
| – – – Other | |||
| 7213 91 41 | – – – – Containing by weight 0,06 % or less of carbon | Free | — |
| 7213 91 49 | – – – – Containing by weight more than 0,06 % but less than 0,25 % of carbon | Free | — |
| 7213 91 70 | – – – – Containing by weight 0,25 % or more but not more than 0,75 % of carbon | Free | — |
| 7213 91 90 | – – – – Containing by weight more than 0,75 % of carbon | Free | — |
| 7213 99 | – – Other | ||
| 7213 99 10 | – – – Containing by weight less than 0,25 % of carbon | Free | — |
| 7213 99 90 | – – – Containing by weight 0,25 % or more of carbon | Free | — |
| 7214 | Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling | ||
| 7214 10 00 | – Forged | Free | — |
| 7214 20 00 | – Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling | Free | — |
| 7214 30 00 | – Other, of free-cutting steel | Free | — |
| – Other | |||
| 7214 91 | – – Of rectangular (other than square) cross-section | ||
| 7214 91 10 | – – – Containing by weight less than 0,25 % of carbon | Free | — |
| 7214 91 90 | – – – Containing by weight 0,25 % or more of carbon | Free | — |
| 7214 99 | – – Other | ||
| – – – Containing by weight less than 0,25 % of carbon | |||
| 7214 99 10 | – – – – Of a type used for concrete reinforcement | Free | — |
| – – – – Other, of circular cross-section measuring in diameter | |||
| 7214 99 31 | – – – – – 80 mm or more | Free | — |
| 7214 99 39 | – – – – – Less than 80 mm | Free | — |
| 7214 99 50 | – – – – Other | Free | — |
| – – – Containing by weight 0,25 % or more of carbon | |||
| – – – – Of a circular cross-section measuring in diameter | |||
| 7214 99 71 | – – – – – 80 mm or more | Free | — |
| 7214 99 79 | – – – – – Less than 80 mm | Free | — |
| 7214 99 95 | – – – – Other | Free | — |
| 7215 | Other bars and rods of iron or non-alloy steel | ||
| 7215 10 00 | – Of free-cutting steel, not further worked than cold-formed or cold-finished | Free | — |
| 7215 50 | – Other, not further worked than cold-formed or cold-finished | ||
| – – Containing by weight less than 0,25 % of carbon | |||
| 7215 50 11 | – – – Of rectangular (other than square) cross-section | Free | — |
| 7215 50 19 | – – – Other | Free | — |
| 7215 50 80 | – – Containing by weight 0,25 % or more of carbon | Free | — |
| 7215 90 00 | – Other | Free | — |
| 7216 | Angles, shapes and sections of iron or non-alloy steel | ||
| 7216 10 00 | – U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm | Free | — |
| – L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm | |||
| 7216 21 00 | – – L sections | Free | — |
| 7216 22 00 | – – T sections | Free | — |
| – U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more | |||
| 7216 31 | – – U sections | ||
| 7216 31 10 | – – – Of a height of 80 mm or more but not exceeding 220 mm | Free | — |
| 7216 31 90 | – – – Of a height exceeding 220 mm | Free | — |
| 7216 32 | – – I sections | ||
| – – – Of a height of 80 mm or more but not exceeding 220 mm | |||
| 7216 32 11 | – – – – With parallel flange faces | Free | — |
| 7216 32 19 | – – – – Other | Free | — |
| – – – Of a height exceeding 220 mm | |||
| 7216 32 91 | – – – – With parallel flange faces | Free | — |
| 7216 32 99 | – – – – Other | Free | — |
| 7216 33 | – – H sections | ||
| 7216 33 10 | – – – Of a height of 80 mm or more but not exceeding 180 mm | Free | — |
| 7216 33 90 | – – – Of a height exceeding 180 mm | Free | — |
| 7216 40 | – L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more | ||
| 7216 40 10 | – – L sections | Free | — |
| 7216 40 90 | – – T sections | Free | — |
| 7216 50 | – Other angles, shapes and sections, not further worked than hot-rolled, hot-drawn or extruded | ||
| 7216 50 10 | – – With a cross-section which is capable of being enclosed in a square the side of which is 80 mm | Free | — |
| – – Other | |||
| 7216 50 91 | – – – Bulb flats | Free | — |
| 7216 50 99 | – – – Other | Free | — |
| – Angles, shapes and sections, not further worked than cold-formed or cold-finished | |||
| 7216 61 | – – Obtained from flat-rolled products | ||
| 7216 61 10 | – – – C, L, U, Z, omega or open-ended sections | Free | — |
| 7216 61 90 | – – – Other | Free | — |
| 7216 69 00 | – – Other | Free | — |
| – Other | |||
| 7216 91 | – – Cold-formed or cold-finished from flat-rolled products | ||
| 7216 91 10 | – – – Profiled (ribbed) sheets | Free | — |
| 7216 91 80 | – – – Other | Free | — |
| 7216 99 00 | – – Other | Free | — |
| 7217 | Wire of iron or non-alloy steel | ||
| 7217 10 | – Not plated or coated, whether or not polished | ||
| – – Containing by weight less than 0,25 % of carbon | |||
| 7217 10 10 | – – – With a maximum cross-sectional dimension of less than 0,8 mm | Free | — |
| – – – With a maximum cross-sectional dimension of 0,8 mm or more | |||
| 7217 10 31 | – – – – Containing indentations, ribs, grooves or other deformations produced during the rolling process | Free | — |
| 7217 10 39 | – – – – Other | Free | — |
| 7217 10 50 | – – Containing by weight 0,25 % or more but less than 0,6 % of carbon | Free | — |
| 7217 10 90 | – – Containing by weight 0,6 % or more of carbon | Free | — |
| 7217 20 | – Plated or coated with zinc | ||
| – – Containing by weight less than 0,25 % of carbon | |||
| 7217 20 10 | – – – With a maximum cross-sectional dimension of less than 0,8 mm | Free | — |
| 7217 20 30 | – – – With a maximum cross-sectional dimension of 0,8 mm or more | Free | — |
| 7217 20 50 | – – Containing by weight 0,25 % or more but less than 0,6 % of carbon | Free | — |
| 7217 20 90 | – – Containing by weight 0,6 % or more of carbon | Free | — |
| 7217 30 | – Plated or coated with other base metals | ||
| – – Containing by weight less than 0,25 % of carbon | |||
| 7217 30 41 | – – – Copper-coated | Free | — |
| 7217 30 49 | – – – Other | Free | — |
| 7217 30 50 | – – Containing by weight 0,25 % or more but less than 0,6 % of carbon | Free | — |
| 7217 30 90 | – – Containing by weight 0,6 % or more of carbon | Free | — |
| 7217 90 | – Other | ||
| 7217 90 20 | – – Containing by weight less than 0,25 % of carbon | Free | — |
| 7217 90 50 | – – Containing by weight 0,25 % or more but less than 0,6 % of carbon | Free | — |
| 7217 90 90 | – – Containing by weight 0,6 % or more of carbon | Free | — |
| III. STAINLESS STEEL | III. STAINLESS STEEL | ||
| 7218 | Stainless steel in ingots or other primary forms; semi-finished products of stainless steel | ||
| 7218 10 00 | – Ingots and other primary forms | Free | — |
| – Other | |||
| 7218 91 | – – Of rectangular (other than square) cross-section | ||
| 7218 91 10 | – – – Containing by weight 2,5 % or more of nickel | Free | — |
| 7218 91 80 | – – – Containing by weight less than 2,5 % of nickel | Free | — |
| 7218 99 | – – Other | ||
| – – – Of square cross-section | |||
| 7218 99 11 | – – – – Rolled or obtained by continous casting | Free | — |
| 7218 99 19 | – – – – Forged | Free | — |
| – – – Other | |||
| 7218 99 20 | – – – – Rolled or obtained by continuous casting | Free | — |
| 7218 99 80 | – – – – Forged | Free | — |
| 7219 | Flat-rolled products of stainless steel, of a width of 600 mm or more | ||
| – Not further worked than hot-rolled, in coils | |||
| 7219 11 00 | – – Of a thickness exceeding 10 mm | Free | — |
| 7219 12 | – – Of a thickness of 4,75 mm or more but not exceeding 10 mm | ||
| 7219 12 10 | – – – Containing by weight 2,5 % or more of nickel | Free | — |
| 7219 12 90 | – – – Containing by weight less than 2,5 % of nickel | Free | — |
| 7219 13 | – – Of a thickness of 3 mm or more but less than 4,75 mm | ||
| 7219 13 10 | – – – Containing by weight 2,5 % or more of nickel | Free | — |
| 7219 13 90 | – – – Containing by weight less than 2,5 % of nickel | Free | — |
| 7219 14 | – – Of a thickness of less than 3 mm | ||
| 7219 14 10 | – – – Containing by weight 2,5 % or more of nickel | Free | — |
| 7219 14 90 | – – – Containing by weight less than 2,5 % of nickel | Free | — |
| – Not further worked than hot-rolled, not in coils | |||
| 7219 21 | – – Of a thickness exceeding 10 mm | ||
| 7219 21 10 | – – – Containing by weight 2,5 % or more of nickel | Free | — |
| 7219 21 90 | – – – Containing by weight less than 2,5 % of nickel | Free | — |
| 7219 22 | – – Of a thickness of 4,75 mm or more but not exceeding 10 mm | ||
| 7219 22 10 | – – – Containing by weight 2,5 % or more of nickel | Free | — |
| 7219 22 90 | – – – Containing by weight less than 2,5 % of nickel | Free | — |
| 7219 23 00 | – – Of a thickness of 3 mm or more but less than 4,75 mm | Free | — |
| 7219 24 00 | – – Of a thickness of less than 3 mm | Free | — |
| – Not further worked than cold-rolled (cold-reduced) | |||
| 7219 31 00 | – – Of a thickness of 4,75 mm or more | Free | — |
| 7219 32 | – – Of a thickness of 3 mm or more but less than 4,75 mm | ||
| 7219 32 10 | – – – Containing by weight 2,5 % or more of nickel | Free | — |
| 7219 32 90 | – – – Containing by weight less than 2,5 % of nickel | Free | — |
| 7219 33 | – – Of a thickness exceeding 1 mm but less than 3 mm | ||
| 7219 33 10 | – – – Containing by weight 2,5 % or more of nickel | Free | — |
| 7219 33 90 | – – – Containing by weight less than 2,5 % of nickel | Free | — |
| 7219 34 | – – Of a thickness of 0,5 mm or more but not exceeding 1 mm | ||
| 7219 34 10 | – – – Containing by weight 2,5 % or more of nickel | Free | — |
| 7219 34 90 | – – – Containing by weight less than 2,5 % of nickel | Free | — |
| 7219 35 | – – Of a thickness of less than 0,5 mm | ||
| 7219 35 10 | – – – Containing by weight 2,5 % or more of nickel | Free | — |
| 7219 35 90 | – – – Containing by weight less than 2,5 % of nickel | Free | — |
| 7219 90 | – Other | ||
| 7219 90 20 | – – Perforated | Free | — |
| 7219 90 80 | – – Other | Free | — |
| 7220 | Flat-rolled products of stainless steel, of a width of less than 600 mm | ||
| – Not further worked than hot-rolled | |||
| 7220 11 00 | – – Of a thickness of 4,75 mm or more | Free | — |
| 7220 12 00 | – – Of a thickness of less than 4,75 mm | Free | — |
| 7220 20 | – Not further worked than cold-rolled (cold-reduced) | ||
| – – Of a thickness of 3 mm or more, containing by weight | |||
| 7220 20 21 | – – – 2,5 % or more of nickel | Free | — |
| 7220 20 29 | – – – Less than 2,5 % of nickel | Free | — |
| – – Of a thickness exceeding 0,35 mm but of less than 3 mm, containing by weight | |||
| 7220 20 41 | – – – 2,5 % or more of nickel | Free | — |
| 7220 20 49 | – – – Less than 2,5 % of nickel | Free | — |
| – – Of a thickness not exceeding 0,35 mm, containing by weight | |||
| 7220 20 81 | – – – 2,5 % or more of nickel | Free | — |
| 7220 20 89 | – – – Less than 2,5 % of nickel | Free | — |
| 7220 90 | – Other | ||
| 7220 90 20 | – – Perforated | Free | — |
| 7220 90 80 | – – Other | Free | — |
| 7221 00 | Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel | ||
| 7221 00 10 | – Containing by weight 2,5 % or more of nickel | Free | — |
| 7221 00 90 | – Containing by weight less than 2,5 % of nickel | Free | — |
| 7222 | Other bars and rods of stainless steel; angles, shapes and sections of stainless steel | ||
| – Bars and rods, not further worked than hot-rolled, hot-drawn or extruded | |||
| 7222 11 | – – Of circular cross-section | ||
| – – – Of a diameter of 80 mm or more, containing by weight | |||
| 7222 11 11 | – – – – 2,5 % or more of nickel | Free | — |
| 7222 11 19 | – – – – Less than 2,5 % of nickel | Free | — |
| – – – Of a diameter of less than 80 mm, containing by weight | |||
| 7222 11 81 | – – – – 2,5 % or more of nickel | Free | — |
| 7222 11 89 | – – – – Less than 2,5 % of nickel | Free | — |
| 7222 19 | – – Other | ||
| 7222 19 10 | – – – Containing by weight 2,5 % or more of nickel | Free | — |
| 7222 19 90 | – – – Containing by weight less than 2,5 % of nickel | Free | — |
| 7222 20 | – Bars and rods, not further worked than cold-formed or cold-finished | ||
| – – Of circular cross-section | |||
| – – – Of a diameter of 80 mm or more, containing by weight | |||
| 7222 20 11 | – – – – 2,5 % or more of nickel | Free | — |
| 7222 20 19 | – – – – Less than 2,5 % of nickel | Free | — |
| – – – Of a diameter of 25 mm or more, but less than 80 mm, containing by weight | |||
| 7222 20 21 | – – – – 2,5 % or more of nickel | Free | — |
| 7222 20 29 | – – – – Less than 2,5 % of nickel | Free | — |
| – – – Of a diameter of less than 25 mm, containing by weight | |||
| 7222 20 31 | – – – – 2,5 % or more of nickel | Free | — |
| 7222 20 39 | – – – – Less than 2,5 % of nickel | Free | — |
| – – Other, containing by weight | |||
| 7222 20 81 | – – – 2,5 % or more of nickel | Free | — |
| 7222 20 89 | – – – Less than 2,5 % of nickel | Free | — |
| 7222 30 | – Other bars and rods | ||
| – – Forged, containing by weight | |||
| 7222 30 51 | – – – 2,5 % or more of nickel | Free | — |
| 7222 30 91 | – – – Less than 2,5 % of nickel | Free | — |
| 7222 30 97 | – – Other | Free | — |
| 7222 40 | – Angles, shapes and sections | ||
| 7222 40 10 | – – Not further worked than hot-rolled, hot-drawn or extruded | Free | — |
| 7222 40 50 | – – Not further worked than cold-formed or cold-finished | Free | — |
| 7222 40 90 | – – Other | Free | — |
| 7223 00 | Wire of stainless steel | ||
| – Containing by weight 2,5 % or more of nickel | |||
| 7223 00 11 | – – Containing by weight 28 % or more but not more than 31 % of nickel and 20 % or more but not more than 22 % of chromium | Free | — |
| 7223 00 19 | – – Other | Free | — |
| – Containing by weight less than 2,5 % of nickel | |||
| 7223 00 91 | – – Containing by weight 13 % or more but not more than 25 % of chromium and 3,5 % or more but not more than 6 % of aluminium | Free | — |
| 7223 00 99 | – – Other | Free | — |
| IV. OTHER ALLOY STEEL; HOLLOW DRILL BARS AND RODS, OF ALLOY OR NON-ALLOY STEEL | IV. OTHER ALLOY STEEL; HOLLOW DRILL BARS AND RODS, OF ALLOY OR NON-ALLOY STEEL | ||
| 7224 | Other alloy steel in ingots or other primary forms; semi-finished products of other alloy steel | ||
| 7224 10 | – Ingots and other primary forms | ||
| 7224 10 10 | – – Of tool steel | Free | — |
| 7224 10 90 | – – Other | Free | — |
| 7224 90 | – Other | ||
| 7224 90 02 | – – Of tool steel | Free | — |
| – – Other | |||
| – – – Of rectangular (including square) cross-section | |||
| – – – – Hot-rolled or obtained by continuous casting | |||
| – – – – – The width measuring less than twice the thickness | |||
| 7224 90 03 | – – – – – – Of high-speed steel | Free | — |
| 7224 90 05 | – – – – – – Containing by weight not more than 0,7 % of carbon, 0,5 % or more but not more than 1,2 % of manganese and 0,6 % or more but not more than 2,3 % of silicon; containing by weight 0,0008 % or more of boron with any other element less than the minimum content referred to in note 1(f) to this chapter | Free | — |
| 7224 90 07 | – – – – – – Other | Free | — |
| 7224 90 14 | – – – – – Other | Free | — |
| 7224 90 18 | – – – – Forged | Free | — |
| – – – Other | |||
| – – – – Hot-rolled or obtained by continuous casting | |||
| 7224 90 31 | – – – – – Containing by weight not less than 0,9 % but not more than 1,15 % of carbon, not less than 0,5 % but not more than 2 % of chromium and, if present, not more than 0,5 % of molybdenum | Free | — |
| 7224 90 38 | – – – – – Other | Free | — |
| 7224 90 90 | – – – – Forged | Free | — |
| 7225 | Flat-rolled products of other alloy steel, of a width of 600 mm or more | ||
| – Of silicon-electrical steel | |||
| 7225 11 00 | – – Grain-oriented | Free | — |
| 7225 19 | – – Other | ||
| 7225 19 10 | – – – Hot-rolled | Free | — |
| 7225 19 90 | – – – Cold-rolled | Free | — |
| 7225 30 | – Other, not further worked than hot-rolled, in coils | ||
| 7225 30 10 | – – Of tool steel | Free | — |
| 7225 30 30 | – – Of high-speed steel | Free | — |
| 7225 30 90 | – – Other | Free | — |
| 7225 40 | – Other, not further worked than hot-rolled, not in coils | ||
| 7225 40 12 | – – Of tool steel | Free | — |
| 7225 40 15 | – – Of high-speed steel | Free | — |
| – – Other | |||
| 7225 40 40 | – – – Of a thickness exceeding 10 mm | Free | — |
| 7225 40 60 | – – – Of a thickness of 4,75 mm or more but not exceeding 10 mm | Free | — |
| 7225 40 90 | – – – Of a thickness of less than 4,75 mm | Free | — |
| 7225 50 | – Other, not further worked than cold-rolled (cold-reduced) | ||
| 7225 50 20 | – – Of high-speed steel | Free | — |
| 7225 50 80 | – – Other | Free | — |
| – Other | |||
| 7225 91 00 | – – Electrolytically plated or coated with zinc | Free | — |
| 7225 92 00 | – – Otherwise plated or coated with zinc | Free | — |
| 7225 99 00 | – – Other | Free | — |
| 7226 | Flat-rolled products of other alloy steel, of a width of less than 600 mm | ||
| – Of silicon-electrical steel | |||
| 7226 11 00 | – – Grain-oriented | Free | — |
| 7226 19 | – – Other | ||
| 7226 19 10 | – – – Not further worked than hot-rolled | Free | — |
| 7226 19 80 | – – – Other | Free | — |
| 7226 20 00 | – Of high-speed steel | Free | — |
| – Other | |||
| 7226 91 | – – Not further worked than hot-rolled | ||
| 7226 91 20 | – – – Of tool steel | Free | — |
| – – – Other | |||
| 7226 91 91 | – – – – Of a thickness of 4,75 mm or more | Free | — |
| 7226 91 99 | – – – – Of a thickness of less than 4,75 mm | Free | — |
| 7226 92 00 | – – Not further worked than cold-rolled (cold-reduced) | Free | — |
| 7226 99 | – – Other | ||
| 7226 99 10 | – – – Electrolytically plated or coated with zinc | Free | — |
| 7226 99 30 | – – – Otherwise plated or coated with zinc | Free | — |
| 7226 99 70 | – – – Other | Free | — |
| 7227 | Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel | ||
| 7227 10 00 | – Of high-speed steel | Free | — |
| 7227 20 00 | – Of silico-manganese steel | Free | — |
| 7227 90 | – Other | ||
| 7227 90 10 | – – Containing by weight 0,0008 % or more of boron with any other element less than the minimum content referred to in note 1(f) to this chapter | Free | — |
| 7227 90 50 | – – Containing by weight 0,9 % or more but not more than 1,15 % of carbon, 0,5 % or more but not more than 2 % of chromium and, if present, not more than 0,5 % of molybdenum | Free | — |
| 7227 90 95 | – – Other | Free | — |
| 7228 | Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel | ||
| 7228 10 | – Bars and rods, of high-speed steel | ||
| 7228 10 20 | – – Not further worked than hot-rolled, hot-drawn or extruded; hot-rolled, hot-drawn or extruded, not further worked than clad | Free | — |
| 7228 10 50 | – – Forged | Free | — |
| 7228 10 90 | – – Other | Free | — |
| 7228 20 | – Bars and rods, of silico-manganese steel | ||
| 7228 20 10 | – – Of rectangular (other than square) cross-section, hot-rolled on four faces | Free | — |
| – – Other | |||
| 7228 20 91 | – – – Not further worked than hot-rolled, hot-drawn or extruded; hot-rolled, hot-drawn or extruded, not further worked than clad | Free | — |
| 7228 20 99 | – – – Other | Free | — |
| 7228 30 | – Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded | ||
| 7228 30 20 | – – Of tool steel | Free | — |
| – – Containing by weight 0,9 % or more but not more than 1,15 % of carbon, 0,5 % or more but not more than 2 % of chromium and, if present, not more than 0,5 % of molybdenum | |||
| 7228 30 41 | – – – Of circular cross-section of a diameter of 80 mm or more | Free | — |
| 7228 30 49 | – – – Other | Free | — |
| – – Other | |||
| – – – Of circular cross-section, of a diameter of | |||
| 7228 30 61 | – – – – 80 mm or more | Free | — |
| 7228 30 69 | – – – – Less than 80 mm | Free | — |
| 7228 30 70 | – – – Of rectangular (other than square) cross-section, hot-rolled on four faces | Free | — |
| 7228 30 89 | – – – Other | Free | — |
| 7228 40 | – Other bars and rods, not further worked than forged | ||
| 7228 40 10 | – – Of tool steel | Free | — |
| 7228 40 90 | – – Other | Free | — |
| 7228 50 | – Other bars and rods, not further worked than cold-formed or cold-finished | ||
| 7228 50 20 | – – Of tool steel | Free | — |
| 7228 50 40 | – – Containing by weight 0,9 % or more but not more than 1,15 % of carbon, 0,5 % or more but not more than 2 % of chromium and, if present, not more than 0,5 % of molybdenum | Free | — |
| – – Other | |||
| – – – Of circular cross-section, of a diameter of | |||
| 7228 50 61 | – – – – 80 mm or more | Free | — |
| 7228 50 69 | – – – – Less than 80 mm | Free | — |
| 7228 50 80 | – – – Other | Free | — |
| 7228 60 | – Other bars and rods | ||
| 7228 60 20 | – – Of tool steel | Free | — |
| 7228 60 80 | – – Other | Free | — |
| 7228 70 | – Angles, shapes and sections | ||
| 7228 70 10 | – – Not further worked than hot-rolled, hot-drawn or extruded | Free | — |
| 7228 70 90 | – – Other | Free | — |
| 7228 80 00 | – Hollow drill bars and rods | Free | — |
| 7229 | Wire of other alloy steel | ||
| 7229 20 00 | – Of silico-manganese steel | Free | — |
| 7229 90 | – Other | ||
| 7229 90 20 | – – Of high-speed steel | Free | — |
| 7229 90 50 | – – Containing by weight 0,9 % or more but not more than 1,15 % of carbon, 0,5 % or more but not more than 2 % of chromium and, if present, not more than 0,5 % of molybdenum | Free | — |
| 7229 90 90 | – – Other | Free | — |
CHAPTER 73
ARTICLES OF IRON OR STEEL
Notes
-
- In this chapter, the expression ‘cast iron’ applies to products obtained by casting in which iron predominates by weight over each of the other elements and which do not comply with the chemical composition of steel as defined in note 1(d) to Chapter 72.
-
- In this chapter, the word ‘wire’ means hot- or cold-formed products of any cross-sectional shape, of which no cross-sectional dimension exceeds 16 mm.
| CN code | Description | Conventional rate of duty (%) | Supplementary unit |
| (1) | (2) | (3) | (4) |
| 7301 | Sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements; welded angles, shapes and sections, of iron or steel | ||
| 7301 10 00 | – Sheet piling | Free | — |
| 7301 20 00 | – Angles, shapes and sections | Free | — |
| 7302 | Railway or tramway track construction material of iron or steel, the following: rails, check-rails and rack rails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers (cross-ties), fish-plates, chairs, chair wedges, sole plates (base plates), rail clips, bedplates, ties and other material specialised for jointing or fixing rails | ||
| 7302 10 | – Rails | ||
| 7302 10 10 | – – Current-conducting, with parts of non-ferrous metal | Free | — |
| – – Other | |||
| – – – New | |||
| – – – – Vignole rails | |||
| 7302 10 22 | – – – – – Of a weight per metre of 36 kg or more | Free | — |
| 7302 10 28 | – – – – – Of a weight per metre of less than 36 kg | Free | — |
| 7302 10 40 | – – – – Grooved rails | Free | — |
| 7302 10 50 | – – – – Other | Free | — |
| 7302 10 90 | – – – Used | Free | — |
| 7302 30 00 | – Switch blades, crossing frogs, point rods and other crossing pieces | 2,7 | — |
| 7302 40 00 | – Fish-plates and sole plates | Free | — |
| 7302 90 00 | – Other | Free | — |
| 7303 00 | Tubes, pipes and hollow profiles, of cast iron | ||
| 7303 00 10 | – Tubes and pipes of a kind used in pressure systems | 3,2 | — |
| 7303 00 90 | – Other | 3,2 | — |
| 7304 | Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel | ||
| – Line pipe of a kind used for oil or gas pipelines | |||
| 7304 11 00 | – – Of stainless steel | Free | — |
| 7304 19 | – – Other | ||
| 7304 19 10 | – – – Of an external diameter not exceeding 168,3 mm | Free | — |
| 7304 19 30 | – – – Of an external diameter exceeding 168,3 mm but not exceeding 406,4 mm | Free | — |
| 7304 19 90 | – – – Of an external diameter exceeding 406,4 mm | Free | — |
| – Casing, tubing and drill pipe, of a kind used in drilling for oil or gas | |||
| 7304 22 00 | – – Drill pipe of stainless steel | Free | — |
| 7304 23 00 | – – Other drill pipe | Free | — |
| 7304 24 00 | – – Other, of stainless steel | Free | — |
| 7304 29 | – – Other | ||
| 7304 29 10 | – – – Of an external diameter not exceeding 168,3 mm | Free | — |
| 7304 29 30 | – – – Of an external diameter exceeding 168,3 mm but not exceeding 406,4 mm | Free | — |
| 7304 29 90 | – – – Of an external diameter exceeding 406,4 mm | Free | — |
| – Other, of circular cross-section, of iron or non-alloy steel | |||
| 7304 31 | – – Cold-drawn or cold-rolled (cold-reduced) | ||
| 7304 31 20 | – – – Precision tubes | Free | — |
| 7304 31 80 | – – – Other | Free | — |
| 7304 39 | – – Other | ||
| 7304 39 10 | – – – Unworked, straight and of uniform wall thickness, for use solely in the manufacture of tubes and pipes with other cross-sections and wall thicknesses | Free | — |
| – – – Other | |||
| – – – – Threaded or threadable tubes (gas pipe) | |||
| 7304 39 52 | – – – – – Plated or coated with zinc | Free | — |
| 7304 39 58 | – – – – – Other | Free | — |
| – – – – Other, of an external diameter | |||
| 7304 39 92 | – – – – – Not exceeding 168,3 mm | Free | — |
| 7304 39 93 | – – – – – Exceeding 168,3 mm but not exceeding 406,4 mm | Free | — |
| 7304 39 98 | – – – – – Exceeding 406,4 mm | Free | — |
| – Other, of circular cross-section, of stainless steel | |||
| 7304 41 00 | – – Cold-drawn or cold-rolled (cold-reduced) | Free | — |
| 7304 49 | – – Other | ||
| 7304 49 10 | – – – Unworked, straight and of uniform wall thickness, for use solely in the manufacture of tubes and pipes with other cross-sections and wall thicknesses | Free | — |
| – – – Other | |||
| 7304 49 93 | – – – – Of an external diameter not exceeding 168,3 mm | Free | — |
| 7304 49 95 | – – – – Of an external diameter exceeding 168,3 mm but not exceeding 406,4 mm | Free | — |
| 7304 49 99 | – – – – Of an external diameter exceeding 406,4 mm | Free | — |
| – Other, of circular cross-section, of other alloy steel | |||
| 7304 51 | – – Cold-drawn or cold-rolled (cold-reduced) | ||
| – – – Straight and of uniform wall thickness, of alloy steel containing by weight not less than 0,9 % but not more than 1,15 % of carbon, not less than 0,5 % but not more than 2 % of chromium and, if present, not more than 0,5 % of molybdenum, of a length | |||
| 7304 51 12 | – – – – Not exceeding 0,5 m | Free | — |
| 7304 51 18 | – – – – Exceeding 0,5 m | Free | — |
| – – – Other | |||
| 7304 51 81 | – – – – Precision tubes | Free | — |
| 7304 51 89 | – – – – Other | Free | — |
| 7304 59 | – – Other | ||
| 7304 59 10 | – – – Unworked, straight and of uniform wall thickness, for use solely in the manufacture of tubes and pipes with other cross-sections and wall-thicknesses | Free | — |
| – – – Other, straight and of uniform wall thickness, of alloy steel containing by weight not less than 0,9 % but not more than 1,15 % of carbon, not less than 0,5 % but not more than 2 % of chromium and, if present, not more than 0,5 % of molybdenum, of a length | |||
| 7304 59 32 | – – – – Not exceeding 0,5 m | Free | — |
| 7304 59 38 | – – – – Exceeding 0,5 m | Free | — |
| – – – Other | |||
| 7304 59 92 | – – – – Of an external diameter not exceeding 168,3 mm | Free | — |
| 7304 59 93 | – – – – Of an external diameter exceeding 168,3 mm but not exceeding 406,4 mm | Free | — |
| 7304 59 99 | – – – – Of an external diameter exceeding 406,4 mm | Free | — |
| 7304 90 00 | – Other | Free | — |
| 7305 | Other tubes and pipes (for example, welded, riveted or similarly closed), having circular cross-sections, the external diameter of which exceeds 406,4 mm, of iron or steel | ||
| – Line pipe of a kind used for oil or gas pipelines | |||
| 7305 11 00 | – – Longitudinally submerged arc welded | Free | — |
| 7305 12 00 | – – Other, longitudinally welded | Free | — |
| 7305 19 00 | – – Other | Free | — |
| 7305 20 00 | – Casing of a kind used in drilling for oil or gas | Free | — |
| – Other, welded | |||
| 7305 31 00 | – – Longitudinally welded | Free | — |
| 7305 39 00 | – – Other | Free | — |
| 7305 90 00 | – Other | Free | — |
| 7306 | Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel | ||
| – Line pipe of a kind used for oil or gas pipelines | |||
| 7306 11 | – – Welded, of stainless steel | ||
| 7306 11 10 | – – – Longitudinally welded | Free | — |
| 7306 11 90 | – – – Spirally welded | Free | — |
| 7306 19 | – – Other | ||
| 7306 19 10 | – – – Longitudinally welded | Free | — |
| 7306 19 90 | – – – Spirally welded | Free | — |
| – Casing and tubing of a kind used in drilling for oil or gas | |||
| 7306 21 00 | – – Welded, of stainless steel | Free | — |
| 7306 29 00 | – – Other | Free | — |
| 7306 30 | – Other, welded, of circular cross-section, of iron or non-alloy steel | ||
| – – Precision tubes, with a wall thickness | |||
| 7306 30 11 | – – – Not exceeding 2 mm | Free | — |
| 7306 30 19 | – – – Exceeding 2 mm | Free | — |
| – – Other | |||
| – – – Threaded or threadable tubes (gas pipe) | |||
| 7306 30 41 | – – – – Plated or coated with zinc | Free | — |
| 7306 30 49 | – – – – Other | Free | — |
| – – – Other, of an external diameter | |||
| – – – – Not exceeding 168,3 mm | |||
| 7306 30 72 | – – – – – Plated or coated with zinc | Free | — |
| 7306 30 77 | – – – – – Other | Free | — |
| 7306 30 80 | – – – – Exceeding 168,3 mm but not exceeding 406,4 mm | Free | — |
| 7306 40 | – Other, welded, of circular cross-section, of stainless steel | ||
| 7306 40 20 | – – Cold-drawn or cold-rolled (cold-reduced) | Free | — |
| 7306 40 80 | – – Other | Free | — |
| 7306 50 | – Other, welded, of circular cross-section, of other alloy steel | ||
| 7306 50 20 | – – Precision tubes | Free | — |
| 7306 50 80 | – – Other | Free | — |
| – Other, welded, of non-circular cross-section | |||
| 7306 61 | – – Of square or rectangular cross-section | ||
| 7306 61 10 | – – – Of stainless steel | Free | — |
| – – – Other | |||
| 7306 61 92 | – – – – With a wall thickness not exceeding 2 mm | Free | — |
| 7306 61 99 | – – – – With a wall thickness exceeding 2 mm | Free | — |
| 7306 69 | – – Of other non-circular cross-section | ||
| 7306 69 10 | – – – Of stainless steel | Free | — |
| 7306 69 90 | – – – Other | Free | — |
| 7306 90 00 | – Other | Free | — |
| 7307 | Tube or pipe fittings (for example, couplings, elbows, sleeves), of iron or steel | ||
| – Cast fittings | |||
| 7307 11 | – – Of non-malleable cast iron | ||
| 7307 11 10 | – – – Of a kind used in pressure systems | 3,7 | — |
| 7307 11 90 | – – – Other | 3,7 | — |
| 7307 19 | – – Other | ||
| 7307 19 10 | – – – Of malleable cast iron | 3,7 | — |
| 7307 19 90 | – – – Other | 3,7 | — |
| – Other, of stainless steel | |||
| 7307 21 00 | – – Flanges | 3,7 | — |
| 7307 22 | – – Threaded elbows, bends and sleeves | ||
| 7307 22 10 | – – – Sleeves | Free | — |
| 7307 22 90 | – – – Elbows and bends | 3,7 | — |
| 7307 23 | – – Butt welding fittings | ||
| 7307 23 10 | – – – Elbows and bends | 3,7 | — |
| 7307 23 90 | – – – Other | 3,7 | — |
| 7307 29 | – – Other | ||
| 7307 29 10 | – – – Threaded | 3,7 | — |
| 7307 29 80 | – – – Other | 3,7 | — |
| – Other | |||
| 7307 91 00 | – – Flanges | 3,7 | — |
| 7307 92 | – – Threaded elbows, bends and sleeves | ||
| 7307 92 10 | – – – Sleeves | Free | — |
| 7307 92 90 | – – – Elbows and bends | 3,7 | — |
| 7307 93 | – – Butt welding fittings | ||
| – – – With greatest external diameter not exceeding 609,6 mm | |||
| 7307 93 11 | – – – – Elbows and bends | 3,7 | — |
| 7307 93 19 | – – – – Other | 3,7 | — |
| – – – With greatest external diameter exceeding 609,6 mm | |||
| 7307 93 91 | – – – – Elbows and bends | 3,7 | — |
| 7307 93 99 | – – – – Other | 3,7 | — |
| 7307 99 | – – Other | ||
| 7307 99 10 | – – – Threaded | 3,7 | — |
| 7307 99 80 | – – – Other | 3,7 | — |
| 7308 | Structures (excluding prefabricated buildings of heading 9406 ) and parts of structures (for example, bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns), of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel | ||
| 7308 10 00 | – Bridges and bridge-sections | Free | — |
| 7308 20 00 | – Towers and lattice masts | Free | — |
| 7308 30 00 | – Doors, windows and their frames and thresholds for doors | Free | p/st 75 |
| 7308 40 00 | – Equipment for scaffolding, shuttering, propping or pit-propping | Free | — |
| 7308 90 | – Other | ||
| – – Solely or principally of sheet | |||
| 7308 90 51 | – – – Panels comprising two walls of profiled (ribbed) sheet with an insulating core | Free | — |
| 7308 90 59 | – – – Other | Free | — |
| 7308 90 98 | – – Other | Free | — |
| 7309 00 | Reservoirs, tanks, vats and similar containers for any material (other than compressed or liquefied gas), of iron or steel, of a capacity exceeding 300 l, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment | ||
| 7309 00 10 | – For gases (other than compressed or liquefied gas) | 2,2 | — |
| – For liquids | |||
| 7309 00 30 | – – Lined or heat-insulated | 2,2 | — |
| – – Other, of a capacity | |||
| 7309 00 51 | – – – Exceeding 100 000 l | 2,2 | — |
| 7309 00 59 | – – – Not exceeding 100 000 l | 2,2 | — |
| 7309 00 90 | – For solids | 2,2 | — |
| 7310 | Tanks, casks, drums, cans, boxes and similar containers, for any material (other than compressed or liquefied gas), of iron or steel, of a capacity not exceeding 300 l, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment | ||
| 7310 10 00 | – Of a capacity of 50 l or more | 2,7 | — |
| – Of a capacity of less than 50 l | |||
| 7310 21 | – – Cans which are to be closed by soldering or crimping | ||
| 7310 21 11 | – – – Cans of a kind used for preserving food | 2,7 | — |
| 7310 21 19 | – – – Cans of a kind used for preserving drink | 2,7 | — |
| – – – Other, with a wall thickness of | |||
| 7310 21 91 | – – – – Less than 0,5 mm | 2,7 | — |
| 7310 21 99 | – – – – 0,5 mm or more | 2,7 | — |
| 7310 29 | – – Other | ||
| 7310 29 10 | – – – With a wall thickness of less than 0,5 mm | 2,7 | — |
| 7310 29 90 | – – – With a wall thickness of 0,5 mm or more | 2,7 | — |
| 7311 00 | Containers for compressed or liquefied gas, of iron or steel | ||
| – Seamless | |||
| – – For a pressure of 165 bar or more, of a capacity of | |||
| 7311 00 11 | – – – Less than 20 l | 2,7 | p/st |
| 7311 00 13 | – – – 20 l or more but not more than 50 l | 2,7 | p/st |
| 7311 00 19 | – – – More than 50 l | 2,7 | p/st |
| 7311 00 30 | – – Other | 2,7 | p/st |
| – Other, of a capacity of | |||
| 7311 00 91 | – – Less than 1 000 l | 2,7 | — |
| 7311 00 99 | – – 1 000 l or more | 2,7 | — |
| 7312 | Stranded wire, ropes, cables, plaited bands, slings and the like, of iron or steel, not electrically insulated | ||
| 7312 10 | – Stranded wire, ropes and cables | ||
| 7312 10 20 | – – Of stainless steel | Free | — |
| – – Other, with a maximum cross-sectional dimension | |||
| – – – Not exceeding 3 mm | |||
| 7312 10 41 | – – – – Plated or coated with copper-zinc alloys (brass) | Free | — |
| 7312 10 49 | – – – – Other | Free | — |
| – – – Exceeding 3 mm | |||
| – – – – Stranded wire | |||
| 7312 10 61 | – – – – – Not coated | Free | — |
| – – – – – Coated | |||
| 7312 10 65 | – – – – – – Plated or coated with zinc | Free | — |
| 7312 10 69 | – – – – – – Other | Free | — |
| – – – – Ropes and cables (including locked coil ropes) | |||
| – – – – – Not coated or only plated or coated with zinc, with a maximum cross-sectional dimension | |||
| 7312 10 81 | – – – – – – Exceeding 3 mm but not exceeding 12 mm | Free | — |
| 7312 10 83 | – – – – – – Exceeding 12 mm but not exceeding 24 mm | Free | — |
| 7312 10 85 | – – – – – – Exceeding 24 mm but not exceeding 48 mm | Free | — |
| 7312 10 89 | – – – – – – Exceeding 48 mm | Free | — |
| 7312 10 98 | – – – – – Other | Free | — |
| 7312 90 00 | – Other | Free | — |
| 7313 00 00 | Barbed wire of iron or steel; twisted hoop or single flat wire, barbed or not, and loosely twisted double wire, of a kind used for fencing, of iron or steel | Free | — |
| 7314 | Cloth (including endless bands), grill, netting and fencing, of iron or steel wire; expanded metal of iron or steel | ||
| – Woven cloth | |||
| 7314 12 00 | – – Endless bands for machinery, of stainless steel | Free | — |
| 7314 14 00 | – – Other woven cloth, of stainless steel | Free | — |
| 7314 19 00 | – – Other | Free | — |
| 7314 20 | – Grill, netting and fencing, welded at the intersection, of wire with a maximum cross-sectional dimension of 3 mm or more and having a mesh size of 100 cm2 or more | ||
| 7314 20 10 | – – Of ribbed wire | Free | — |
| 7314 20 90 | – – Other | Free | — |
| – Other grill, netting and fencing, welded at the intersection | |||
| 7314 31 00 | – – Plated or coated with zinc | Free | — |
| 7314 39 00 | – – Other | Free | — |
| – Other cloth, grill, netting and fencing | |||
| 7314 41 00 | – – Plated or coated with zinc | Free | — |
| 7314 42 00 | – – Coated with plastics | Free | — |
| 7314 49 00 | – – Other | Free | — |
| 7314 50 00 | – Expanded metal | Free | — |
| 7315 | Chain and parts thereof, of iron or steel | ||
| – Articulated link chain and parts thereof | |||
| 7315 11 | – – Roller chain | ||
| 7315 11 10 | – – – Of a kind used for cycles and motorcycles | 2,7 | — |
| 7315 11 90 | – – – Other | 2,7 | — |
| 7315 12 00 | – – Other chain | 2,7 | — |
| 7315 19 00 | – – Parts | 2,7 | — |
| 7315 20 00 | – Skid chain | 2,7 | — |
| – Other chain | |||
| 7315 81 00 | – – Stud-link | 2,7 | — |
| 7315 82 00 | – – Other, welded link | 2,7 | — |
| 7315 89 00 | – – Other | 2,7 | — |
| 7315 90 00 | – Other parts | 2,7 | — |
| 7316 00 00 | Anchors, grapnels and parts thereof, of iron or steel | 2,7 | — |
| 7317 00 | Nails, tacks, drawing pins, corrugated nails, staples (other than those of heading 8305 ) and similar articles, of iron or steel, whether or not with heads of other material, but excluding such articles with heads of copper | ||
| – Cold-pressed from wire | |||
| 7317 00 20 | – – Nails in strips or coils | Free | — |
| 7317 00 60 | – – Other | Free | — |
| 7317 00 80 | – Other | Free | — |
| 7318 | Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of iron or steel | ||
| – Threaded articles | |||
| 7318 11 00 | – – Coach screws | 3,7 | — |
| 7318 12 | – – Other wood screws | ||
| 7318 12 10 | – – – Of stainless steel | 3,7 | — |
| 7318 12 90 | – – – Other | 3,7 | — |
| 7318 13 00 | – – Screw hooks and screw rings | 3,7 | — |
| 7318 14 | – – Self-tapping screws | ||
| 7318 14 10 | – – – Of stainless steel | 3,7 | — |
| – – – Other | |||
| 7318 14 91 | – – – – Spaced-thread screws | 3,7 | — |
| 7318 14 99 | – – – – Other | 3,7 | — |
| 7318 15 | – – Other screws and bolts, whether or not with their nuts or washers | ||
| 7318 15 10 | – – – Turned from bars, rods, profiles, or wire, of solid section, of a shank thickness not exceeding 6 mm | 3,7 | — |
| – – – Other | |||
| 7318 15 20 | – – – – For fixing railway track construction material | 3,7 | — |
| – – – – Other | |||
| – – – – – Without heads | |||
| 7318 15 30 | – – – – – – Of stainless steel | 3,7 | — |
| – – – – – – Other, with a tensile strength | |||
| 7318 15 41 | – – – – – – – Of less than 800 MPa | 3,7 | — |
| 7318 15 49 | – – – – – – – Of 800 MPa or more | 3,7 | — |
| – – – – – With heads | |||
| – – – – – – Slotted or cross-recessed heads | |||
| 7318 15 51 | – – – – – – – Of stainless steel | 3,7 | — |
| 7318 15 59 | – – – – – – – Other | 3,7 | — |
| – – – – – – Hexagonal-socket heads | |||
| 7318 15 61 | – – – – – – – Of stainless steel | 3,7 | — |
| 7318 15 69 | – – – – – – – Other | 3,7 | — |
| – – – – – – Hexagonal heads | |||
| 7318 15 70 | – – – – – – – Of stainless steel | 3,7 | — |
| – – – – – – – Other, with a tensile strength | |||
| 7318 15 81 | – – – – – – – – Of less than 800 MPa | 3,7 | — |
| 7318 15 89 | – – – – – – – – Of 800 MPa or more | 3,7 | — |
| 7318 15 90 | – – – – – – Other | 3,7 | — |
| 7318 16 | – – Nuts | ||
| 7318 16 10 | – – – Turned from bars, rods, profiles, or wire, of solid section, of a hole diameter not exceeding 6 mm | 3,7 | — |
| – – – Other | |||
| 7318 16 30 | – – – – Of stainless steel | 3,7 | — |
| – – – – Other | |||
| 7318 16 50 | – – – – – Self-locking nuts | 3,7 | — |
| – – – – – Other, with an inside diameter | |||
| 7318 16 91 | – – – – – – Not exceeding 12 mm | 3,7 | — |
| 7318 16 99 | – – – – – – Exceeding 12 mm | 3,7 | — |
| 7318 19 00 | – – Other | 3,7 | — |
| – Non-threaded articles | |||
| 7318 21 00 | – – Spring washers and other lock washers | 3,7 | — |
| 7318 22 00 | – – Other washers | 3,7 | — |
| 7318 23 00 | – – Rivets | 3,7 | — |
| 7318 24 00 | – – Cotters and cotter pins | 3,7 | — |
| 7318 29 00 | – – Other | 3,7 | — |
| 7319 | Sewing needles, knitting needles, bodkins, crochet hooks, embroidery stilettos and similar articles, for use in the hand, of iron or steel; safety pins and other pins of iron or steel, not elsewhere specified or included | ||
| 7319 40 00 | – Safety pins and other pins | 2,7 | — |
| 7319 90 | – Other | ||
| 7319 90 10 | – – Sewing, darning or embroidery needles | 2,7 | — |
| 7319 90 90 | – – Other | 2,7 | — |
| 7320 | Springs and leaves for springs, of iron or steel | ||
| 7320 10 | – Leaf-springs and leaves therefor | ||
| – – Hot-worked | |||
| 7320 10 11 | – – – Laminated springs and leaves therefor | 2,7 | — |
| 7320 10 19 | – – – Other | 2,7 | — |
| 7320 10 90 | – – Other | 2,7 | — |
| 7320 20 | – Helical springs | ||
| 7320 20 20 | – – Hot-worked | 2,7 | — |
| – – Other | |||
| 7320 20 81 | – – – Coil compression springs | 2,7 | — |
| 7320 20 85 | – – – Coil tension springs | 2,7 | — |
| 7320 20 89 | – – – Other | 2,7 | — |
| 7320 90 | – Other | ||
| 7320 90 10 | – – Flat spiral springs | 2,7 | — |
| 7320 90 30 | – – Discs springs | 2,7 | — |
| 7320 90 90 | – – Other | 2,7 | — |
| 7321 | Stoves, ranges, grates, cookers (including those with subsidiary boilers for central heating), barbecues, braziers, gas rings, plate warmers and similar non-electric domestic appliances, and parts thereof, of iron or steel | ||
| – Cooking appliances and plate warmers | |||
| 7321 11 | – – For gas fuel or for both gas and other fuels | ||
| 7321 11 10 | – – – With oven, including separate ovens | 2,7 | p/st |
| 7321 11 90 | – – – Other | 2,7 | p/st |
| 7321 12 00 | – – For liquid fuel | 2,7 | p/st |
| 7321 19 00 | – – Other, including appliances for solid fuel | 2,7 | p/st |
| – Other appliances | |||
| 7321 81 00 | – – For gas fuel or for both gas and other fuels | 2,7 | p/st |
| 7321 82 00 | – – For liquid fuel | 2,7 | p/st |
| 7321 89 00 | – – Other, including appliances for solid fuel | 2,7 | p/st |
| 7321 90 00 | – Parts | 2,7 | — |
| 7322 | Radiators for central heating, not electrically heated, and parts thereof, of iron or steel; air heaters and hot-air distributors (including distributors which can also distribute fresh or conditioned air), not electrically heated, incorporating a motor-driven fan or blower, and parts thereof, of iron or steel | ||
| – Radiators and parts thereof | |||
| 7322 11 00 | – – Of cast iron | 3,2 | — |
| 7322 19 00 | – – Other | 3,2 | — |
| 7322 90 00 | – Other | 3,2 | — |
| 7323 | Table, kitchen or other household articles and parts thereof, of iron or steel; iron or steel wool; pot scourers and scouring or polishing pads, gloves and the like, of iron or steel | ||
| 7323 10 00 | – Iron or steel wool; pot scourers and scouring or polishing pads, gloves and the like | 3,2 | — |
| – Other | |||
| 7323 91 00 | – – Of cast iron, not enamelled | 3,2 | — |
| 7323 92 00 | – – Of cast iron, enamelled | 3,2 | — |
| 7323 93 00 | – – Of stainless steel | 3,2 | — |
| 7323 94 00 | – – Of iron (other than cast iron) or steel, enamelled | 3,2 | — |
| 7323 99 00 | – – Other | 3,2 | — |
| 7324 | Sanitary ware and parts thereof, of iron or steel | ||
| 7324 10 00 | – Sinks and washbasins, of stainless steel | 2,7 | — |
| – Baths | |||
| 7324 21 00 | – – Of cast iron, whether or not enamelled | 3,2 | p/st |
| 7324 29 00 | – – Other | 3,2 | p/st |
| 7324 90 00 | – Other, including parts | 3,2 | — |
| 7325 | Other cast articles of iron or steel | ||
| 7325 10 | – Of non-malleable cast iron | ||
| 7325 10 50 | – – Surface and valve boxes | 1,7 | p/st |
| – – Other | |||
| 7325 10 92 | – – – For sewage, water, etc., systems | 1,7 | — |
| 7325 10 99 | – – – Other | 1,7 | — |
| – Other | |||
| 7325 91 00 | – – Grinding balls and similar articles for mills | 2,7 | — |
| 7325 99 | – – Other | ||
| 7325 99 10 | – – – Of malleable cast iron | 2,7 | — |
| 7325 99 90 | – – – Other | 2,7 | — |
| 7326 | Other articles of iron or steel | ||
| – Forged or stamped, but not further worked | |||
| 7326 11 00 | – – Grinding balls and similar articles for mills | 2,7 | — |
| 7326 19 | – – Other | ||
| 7326 19 10 | – – – Open-die forged | 2,7 | — |
| 7326 19 90 | – – – Other | 2,7 | — |
| 7326 20 00 | – Articles of iron or steel wire | 2,7 | — |
| 7326 90 | – Other | ||
| 7326 90 30 | – – Ladders and steps | 2,7 | — |
| 7326 90 40 | – – Pallets and similar platforms for handling goods | 2,7 | — |
| 7326 90 50 | – – Reels for cables, piping and the like | 2,7 | — |
| 7326 90 60 | – – Non-mechanical ventilators, guttering, hooks and like articles used in the building industry | 2,7 | — |
| – – Other articles of iron or steel | |||
| 7326 90 92 | – – – Open-die forged | 2,7 | — |
| 7326 90 94 | – – – Closed-die forged | 2,7 | — |
| 7326 90 96 | – – – Sintered | 2,7 | — |
| 7326 90 98 | – – – Other | 2,7 | — |
CHAPTER 74
COPPER AND ARTICLES THEREOF
Note
-
- In this chapter, the following expressions have the meanings hereby assigned to them:
- (a) Refined copper:
Metal containing at least 99,85 % by weight of copper; or
Metal containing at least 97,5 % by weight of copper, provided that the content by weight of any other element does not exceed the limit specified in the following table:
Other elements
| Element | Element | Limiting content % by weight |
|---|---|---|
| Ag | Silver | 0,25 |
| As | Arsenic | 0,5 |
| Cd | Cadmium | 1,3 |
| Cr | Chromium | 1,4 |
| Mg | Magnesium | 0,8 |
| Pb | Lead | 1,5 |
| S | Sulphur | 0,7 |
| Sn | Tin | 0,8 |
| Te | Tellurium | 0,8 |
| Zn | Zinc | 1 |
| Zr | Zirconium | 0,3 |
| Other elements87, each | Other elements87, each | 0,3 |
- (b) Copper alloys:
Metallic substances other than unrefined copper in which copper predominates by weight over each of the other elements, provided that:
- (1) the content by weight of at least one of the other elements is greater than the limit specified in the foregoing table; or
- (2) the total content by weight of such other elements exceeds 2,5 %.
- (c) Master alloys:
Alloys containing with other elements more than 10 % by weight of copper, not usefully malleable and commonly used as an additive in the manufacture of other alloys or as de-oxidants, de-sulphurising agents or for similar uses in the metallurgy of non-ferrous metals. However, copper phosphide (phosphor copper) containing more than 15 % by weight of phosphorus falls in heading 2848 .
- (d) Bars and rods:
Rolled, extruded, drawn or forged products, not in coils, which have a uniform solid cross-section along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons (including ‘flattened circles’ and ‘modified rectangles’, of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). Products with a rectangular (including square), triangular or polygonal cross-section may have corners rounded along their whole length. The thickness of such products which have a rectangular (including ‘modified rectangular’) cross-section exceeds one-tenth of the width. The expression also covers cast or sintered products, of the same forms and dimensions, which have been subsequently worked after production (otherwise than by simple trimming or de-scaling), provided that they have not thereby assumed the character of articles or products of other headings.
Wire-bars and billets with their ends tapered or otherwise worked simply to facilitate their entry into machines for converting them into, for example, drawing stock (wire-rod) or tubes, are however to be taken to be unwrought copper of heading 7403 .
- (e) Profiles:
Rolled, extruded, drawn, forged or formed products, coiled or not, of a uniform cross-section along their whole length, which do not conform to any of the definitions of bars, rods, wire, plates, sheets, strip, foil, tubes or pipes. The expression also covers cast or sintered products, of the same forms, which have been subsequently worked after production (otherwise than by simple trimming or de-scaling), provided that they have not thereby assumed the character of articles or products of other headings.
- (f) Wire:
Rolled, extruded or drawn products, in coils, which have a uniform solid cross-section along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons (including ‘flattened circles’ and ‘modified rectangles’, of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). Products with a rectangular (including square), triangular or polygonal cross-section may have corners rounded along their whole length. The thickness of such products which have a rectangular (including ‘modified rectangular’) cross-section exceeds one-tenth of the width.
- (g) Plates, sheets, strip and foil:
Flat-surfaced products (other than the unwrought products of heading 7403 ), coiled or not, of solid rectangular (other than square) cross-section with or without rounded corners (including ‘modified rectangles’ of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel) of a uniform thickness, which are:
- — of rectangular (including square) shape with a thickness not exceeding one-tenth of the width,
- — of a shape other than rectangular or square, of any size, provided that they do not assume the character of articles or products of other headings.
Headings 7409 and 7410 apply, inter alia, to plates, sheets, strip and foil with patterns (for example, grooves, ribs, chequers, tears, buttons, lozenges) and to such products which have been perforated, corrugated, polished or coated, provided that they do not thereby assume the character of articles or products of other headings.
- (h) Tubes and pipes:
Hollow products, coiled or not, which have a uniform cross-section with only one enclosed void along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons, and which have a uniform wall thickness. Products with a rectangular (including square), equilateral triangular or regular convex polygonal cross-section, which may have corners rounded along their whole length, are also to be taken to be tubes and pipes provided the inner and outer cross-sections are concentric and have the same form and orientation. Tubes and pipes of the foregoing cross-sections may be polished, coated, bent, threaded, drilled, waisted, expanded, cone-shaped or fitted with flanges, collars or rings.
Subheading note
-
- In this chapter, the following expressions have the meanings hereby assigned to them:
- (a) Copper-zinc base alloys (brasses):
Alloys of copper and zinc, with or without other elements. When other elements are present:
- — zinc predominates by weight over each of such other elements,
- — any nickel content by weight is less than 5 % (see copper-nickel-zinc alloys (nickel silvers)), and
- — any tin content by weight is less than 3 % (see copper-tin alloys (bronzes)).
- (b) Copper-tin base alloys (bronzes):
Alloys of copper and tin, with or without other elements. When other elements are present, tin predominates by weight over each of such other elements, except that when the tin content is 3 % or more the zinc content by weight may exceed that of tin but must be less than 10 %.
- (c) Copper-nickel-zinc base alloys (nickel silvers):
Alloys of copper, nickel and zinc, with or without other elements. The nickel content is 5 % or more by weight (see copper-zinc alloys (brasses)).
- (d) Copper-nickel base alloys:
Reading this document does not replace reading the official text published in the Official Journal of the European Union. We assume no responsibility for any inaccuracies arising from the conversion of the original to this format.
This text is published under EUR-Lex's own terms of reuse, not a Legalize or public-domain licence.
EUR-Lex
Creative Commons Attribution 4.0 International (CC BY 4.0)
© European Union, https://eur-lex.europa.eu — Source: EUR-Lex (Publications Office of the European Union). Reused under the Creative Commons Attribution 4.0 International (CC BY 4.0) licence. Only EU legislation published in the printed Official Journal of the European Union is deemed authentic; consolidated texts are reproduced here for documentation purposes and have been reformatted to Markdown.