Legalize / European Union / Implementing Regulation

Commission Implementing Regulation (EU) 2015/504 of 11 March 2015 implementing Regulation (EU) No 167/2013 of the European Parliament and of the Council with regard to the administrative requirements for the approval and market surveillance of agricultural and forestry vehicles Text with EEA relevance

Type Implementing Regulation

Publication 2015-03-28

Last updated 2018-08-07

State In force

Department European Commission

Source EUR-Lex

articles 14

Reform history JSON API

10.1.3. At engine speed: … min^–1

10.2. Brief description and schematic drawing of exhaust system (including the air intake system, the devices for noise and tailpipe emission control):

10.3. Air-intake system

10.3.1. Intake manifold description (include drawings and/or photos) (¹⁰):

10.3.2. Air filter

10.3.2.1. Photographs and/or drawings:

10.3.2.2. Make:

10.3.2.3. Type:

10.3.3. Intake silencer

10.3.3.1. Photographs and/or drawings:

10.3.3.2. Make:

10.3.3.3. Type:

10.4. Exhaust system

10.4.1. Description and/or drawing of the exhaust manifold (¹⁰):

10.4.2. Description and/or drawing of the elements of the exhaust system that are not part of the engine system:

10.4.3. Maximum allowable exhaust back pressure at rated engine speed and at 100 % load: … kPa

10.4.4. Type, marking of the exhaust noise-abatement device(s):

10.4.4.1. Exhaust noise-abatement device containing fibrous materials: yes/no (⁴):

10.4.5. Exhaust system volume: … dm³

10.4.6. Location of the exhaust outlet:

10.4.7. Additional noise-reducing measures in the engine compartment and on the engine for external noise (if any):

10.5. Details of any non-engine related devices designed to reduce noise (if not covered by other items):

11. DRIVE-TRAIN AND CONTROL (¹³)

11.1. Brief description and schematic drawing of the vehicle drive-train and its control system (transmission ratio change system, clutch control or any other element of drive-train): …

11.2. Transmission

11.2.1. Brief description and schematic drawing of transmission ratio change system(s) and its control: …

11.2.2. Diagram and or drawing of the power transmission: …

11.2.3. Type of power transmission: Gear (including planetary gear sets) / belt / hydrostatic / electric / other (⁴) (if other, specify: …)

11.2.4. Brief description of the electrical/electronic components (if any): …

11.2.5. Location relative to the engine: …

11.2.6. Method of control: …

11.2.7. Transfer box: with/without (⁴)

11.2.8. Type of transmission ratio change system: Mechanical (gear change) / Double clutch (gear change) / Semi-automatic (gear change) / Automatic (gear change) / Continuously Variable Transmission/ hydrostatic / not applicable / other (⁴) (if other, specify: …)

11.3. Clutch (if any)

11.3.1. Brief description and schematic drawing of the clutch and its control system:

11.3.2. Maximum torque conversion:

11.4. Gear ratios

Gear	Internal gearbox ratios (ratios of engine to gearbox output shaft revolutions)	Internal transfer box ratios (ratios of engine to transfer box output shaft revolutions)	Final drive ratio(s) (ratio of gearbox output shaft to driven wheel revolutions)	Total gear ratios	Ratio (engine speed/vehicle speed) for manual transmission only
Maximum for CVT [^E0024] 1 2 3 … Minimum for CVT [^E0024] Reverse 1 …

Continuously variable transmission

Appendix 3

Model information document relating to EU type-approval of an engine/engine family as a component/STU

A. GENERAL INFORMATION

2. GENERAL INFORMATION CONCERNING SYSTEMS, COMPONENTS OR SEPARATE TECHNICAL UNITS

2.1. Make(s) (trade name(s) of manufacturer): …

2.2. Type (⁶): …

2.2.1. Commercial name(s) (if available): …

2.2.2. Type-approval number(s) (⁴⁹) (if available): …

2.2.3. Type-approval(s) issued on (date, if available): …

2.2.4. For components and separate technical units, location and method of attachment of the type-approval mark(s) (if available) (¹⁹): …

2.3. Company name and address of manufacturer: …

2.3.1. Name(s) and address(es) of assembly/manufacture plants: …

2.3.2. Name and address of manufacturer's authorised representative (if any): …

2.4. For systems and separate technical units, vehicle(s) for which they are intended for (²¹):

2.4.1. Type (¹⁷): …

2.4.2. Variant(s) (¹⁷): …

2.4.3. Version(s) (¹⁷): …

2.4.4. Commercial name(s) (if available): …

2.4.5. Category, subcategory and speed index of the vehicle (²): …

5. GENERAL POWERTRAIN CHARACTERISTICS

B. INFORMATION ON ENVIRONMENTAL AND PROPULSION PERFORMANCE

6. ESSENTIAL CHARACTERISTICS OF THE ENGINE

6.1.7. Category and sub-category of the engine (⁷):

6.2.1. Combustion Cycle: four stroke cycle/two stroke cycle/rotary/other (specify) (⁴): …

6.2.2. Ignition Type: Compression ignition/spark ignition (⁴)

6.2.3.1. Cylinders' number: … and configuration (²⁶):

6.2.8. Fuel

6.2.8.1. Fuel Type (⁹): …

6.2.8.3. List of additional fuels, fuel mixtures or emulsions compatible with use by the engine declared by the manufacturer in accordance with point 1.4 of Annex I to Delegated Regulation (EU) 2017/654 (provide reference to recognised standard or specification): …

6.3.2.1. Declared rated speed: … rpm

6.3.2.1.2. Declared rated net power: … kW

6.3.2.2. Maximum power speed: … rpm

6.3.2.2.2. Maximum net power: … kW

6.3.6.4. Engine total swept volume: … cm³

Appendix 4

Model information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) a driver information system

A. GENERAL INFORMATION

2. GENERAL INFORMATION CONCERNING SYSTEMS, COMPONENTS OR SEPARATE TECHNICAL UNITS

2.1. Make(s) (trade name(s) of manufacturer): …

2.2. Type (⁶): …

2.2.1. Commercial name(s) (if available): …

2.2.2. Type-approval number(s) (⁴⁹) (if available): …

2.2.3. Type-approval(s) issued on (date, if available): …

2.2.4. For components and separate technical units, location and method of attachment of the type-approval mark(s) (if available) (¹⁹): …

2.3. Company name and address of manufacturer: …

2.3.1. Name(s) and address(es) of assembly/manufacture plants: …

2.3.2. Name and address of manufacturer's authorised representative (if any): …

2.4. For systems and separate technical units, vehicle(s) for which they are intended for (²¹):

2.4.1. Type (¹⁷): …

2.4.2. Variant(s) (¹⁷): …

2.4.3. Version(s) (¹⁷): …

2.4.4. Commercial name(s) (if available): …

2.4.5. Category, subcategory and speed index of the vehicle (²): …

20. DRIVER INFORMATION SYSTEMS

20.1. Requirements under ISO 15077:2008 (Tractors and self-propelled machinery for agriculture — Operator controls — Actuating forces, displacement, location and method of operation) Annex B on operator controls associated with virtual terminals are met with relevant documentation included in the information document: yes/no (⁴)

Appendix 5

Model information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) an installation of lighting and light-signalling devices system

A. GENERAL INFORMATION

2. GENERAL INFORMATION CONCERNING SYSTEMS, COMPONENTS OR SEPARATE TECHNICAL UNITS

2.1. Make(s) (trade name(s) of manufacturer): …

2.2. Type (⁶): …

2.2.1. Commercial name(s) (if available): …

2.2.2. Type-approval number(s) (⁴⁹) (if available): …

2.2.3. Type-approval(s) issued on (date, if available): …

2.2.4. For components and separate technical units, location and method of attachment of the type-approval mark(s) (if available) (¹⁹): …

2.3. Company name and address of manufacturer: …

2.3.1. Name(s) and address(es) of assembly/manufacture plants: …

2.3.2. Name and address of manufacturer's authorised representative (if any): …

2.4. For systems and separate technical units, vehicle(s) for which they are intended for (²¹):

2.4.1. Type (¹⁷): …

2.4.2. Variant(s) (¹⁷): …

2.4.3. Version(s) (¹⁷): …

2.4.4. Commercial name(s) (if available): …

2.4.5. Category, subcategory and speed index of the vehicle (²): …

3. GENERAL CONSTRUCTION CHARACTERISTICS

3.1. Photographs or drawings of a representative version of the vehicle: …

3.2. Scale and dimensioned drawing of the whole vehicle: …

21. INSTALLATION OF LIGHTING, LIGHT-SIGNALLING DEVICES, INCLUDING AUTOMATIC SWITCHING OF LIGHTING

21.1. List of all devices (mentioning the number, make(s),type, component type-approval mark(s), the maximum intensity of the main-beam headlamps, colour, the corresponding tell-tale); the list may include several types of device for each function; in addition, the list may include in respect of each function the additional annotation ‘or equivalent devices’: …

21.2. A diagram of the lighting and signalling installation as a whole, showing the position of the various devices on the vehicle: …

21.3. Dimensioned sketches of the exterior of the vehicle showing the location of the lighting and light-signalling devices, number and colour of lights: …

21.4. For every lamp and reflector, supply the following information:

21.4.1. Drawing showing the extent of the illuminating surface: …

21.4.2. Method used to define the apparent surface: …

21.4.3. Axis of reference and centre of reference: …

21.4.4. Method of operation of concealable lamps: …

21.5. Description/drawing and type of headlamp levelling device (e.g. automatic, stepwise manually adjustable, continuously manually adjustable) (⁴): …

21.5.1. Control device: …

21.5.2. Reference marks: …

21.5.3. Marks assigned for loading conditions: …

21.6. For R- and S-category vehicles, description of the power connection for lighting and light-signalling devices: …

21.7. Brief description of the electrical and/or electronic components used in the lighting system and in the light-signalling system: …

Appendix 6

Model information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) an electro-magnetic compatibility system

A. GENERAL INFORMATION

2. GENERAL INFORMATION CONCERNING SYSTEMS, COMPONENTS OR SEPARATE TECHNICAL UNITS

2.1. Make(s) (trade name(s) of manufacturer): …

2.2. Type (⁶): …

2.2.1. Commercial name(s) (if available): …

2.2.2. Type-approval number(s) (⁴⁹) (if available): …

2.2.3. Type-approval(s) issued on (date, if available): …

2.2.4. For components and separate technical units, location and method of attachment of the type-approval mark(s) (if available) (¹⁹): …

2.3. Company name and address of manufacturer: …

2.3.1. Name(s) and address(es) of assembly/manufacture plants: …

2.3.2. Name and address of manufacturer's authorised representative (if any): …

2.4. For systems and separate technical units, vehicle(s) for which they are intended for (²¹):

2.4.1. Type (¹⁷): …

2.4.2. Variant(s) (¹⁷): …

2.4.3. Version(s) (¹⁷): …

2.4.4. Commercial name(s) (if available): …

2.4.5. Category, subcategory and speed index of the vehicle (²): …

24. ELECTRO-MAGNETIC COMPATIBILITY (EMC)

24.1. Schedule describing all projected combinations of relevant vehicle electrical/electronic systems or ESAs, body styles (⁶⁰), variations in body material, general wiring arrangements, engine variations, left-hand/right-hand drive versions and wheelbase versions: …

24.2. Requirements under UNECE Regulation No 10 (OJ L 254, 20.9.2012, p. 1) are met with the relevant documentation included in the information document: yes/no (⁴)

24.3. Requirements under ISO 14982:1998 (Agricultural and forestry machinery — Electromagnetic compatibility — Test methods and acceptance criteria) are met with relevant documentation included in the information document: yes/no (⁴)

24.4. Alternatively to entry 24.2 or entry 24.3, provide the following information:

24.4.1. Description and drawings/photographs of the shapes and constituent materials of the part of the body forming the engine compartment and adjacent parts of the passenger compartment: …

24.4.2. Drawings or photographs of the position of the metal components housed in the engine compartment (e.g. heating appliances, spare wheel, air filter, steering mechanism, etc.): …

24.4.3. Table or drawing of radio-interference control equipment: …

24.4.4. Particulars of the nominal value of the direct-current resistance, and, in the case of resistive ignition cables, of their nominal resistance per metre: …

Appendix 7

Model information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) an installation of audible warning device(s) system

A. GENERAL INFORMATION

2. GENERAL INFORMATION CONCERNING SYSTEMS, COMPONENTS OR SEPARATE TECHNICAL UNITS

2.1. Make(s) (trade name(s) of manufacturer): …

2.2. Type (⁶): …

2.2.1. Commercial name(s) (if available): …

2.2.2. Type-approval number(s) (⁴⁹) (if available): …

2.2.3. Type-approval(s) issued on (date, if available): …

2.2.4. For components and separate technical units, location and method of attachment of the type-approval mark(s) (if available) (¹⁹): …

2.3. Company name and address of manufacturer: …

2.3.1. Name(s) and address(es) of assembly/manufacture plants: …

2.3.2. Name and address of manufacturer's authorised representative (if any): …

2.4. For systems and separate technical units, vehicle(s) for which they are intended for (²¹):

2.4.1. Type (¹⁷): …

2.4.2. Variant(s) (¹⁷): …

2.4.3. Version(s) (¹⁷): …

2.4.4. Commercial name(s) (if available): …

2.4.5. Category, subcategory and speed index of the vehicle (²): …

25. AUDIBLE WARNING DEVICE(S)

25.1. Component type-approval for an audible warning device granted according to the requirements for N-category vehicles in the UNECE Regulation No 28 (OJ L 323, 6.12.2011, p. 33), with relevant documentation included in the information document: yes/no (⁴)

25.2. Summary description of device(s) used: …

25.3. Drawing(s) showing the location of the audible warning device(s) in relation to the structure of the vehicle: …

25.4. Details of the method of attachment, including the part of the vehicle structure to which the audible warning device(s) is (are) attached: …

25.5. Electrical/pneumatic circuit diagram: …

25.5.1. Voltage: AC/DC (⁴)

25.5.2. Rated voltage or air pressure: … V / kPa (⁴)

25.6. Drawing of the mounting device: …

Appendix 8

Model information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) the installation of rear-view mirrors as a system

A. GENERAL INFORMATION

2. GENERAL INFORMATION CONCERNING SYSTEMS, COMPONENTS OR SEPARATE TECHNICAL UNITS

2.1. Make(s) (trade name(s) of manufacturer): …

2.2. Type (⁶): …

2.2.1. Commercial name(s) (if available): …

2.2.2. Type-approval number(s) (⁴⁹) (if available): …

2.2.3. Type-approval(s) issued on (date, if available): …

2.2.4. For components and separate technical units, location and method of attachment of the type-approval mark(s) (if available) (¹⁹): …

2.3. Company name and address of manufacturer: …

2.3.1. Name(s) and address(es) of assembly/manufacture plants: …

2.3.2. Name and address of manufacturer's authorised representative (if any): …

2.4. For systems and separate technical units, vehicle(s) for which they are intended for (²¹):

2.4.1. Type (¹⁷): …

2.4.2. Variant(s) (¹⁷): …

2.4.3. Version(s) (¹⁷): …

2.4.4. Commercial name(s) (if available): …

2.4.5. Category, subcategory and speed index of the vehicle (²): …

18. REAR-VIEW MIRRORS

18.1. Number and class(es) of the mirrors: …

18.2. Requirements under UNECE Regulation No 46 (OJ L 177, 10.7.2010, p. 211) are met with the relevant documentation included in the information document: yes/no/not applicable (⁴)

18.3. Requirements under UNECE Regulation No 81 (OJ L 185, 13.7.2012, p. 1) are met with the relevant documentation included in the information document: yes/no/not applicable (⁴)

18.4. Drawing(s) for the identification of the mirror showing the position of the mirror relative to the vehicle structure: …

18.5. Details of the method of attachment including that part of the vehicle structure to which it is attached: …

18.6. Brief description of the electrical/electronic components of the adjustment system: …

18.7 Technical description of the defrosting and demisting system of the mirrors: …

18.8. Optional equipment that might restrict the field of vision to the rear: …

18.9. Field of vision for rear view mirror(s) of class II

18.9.1. Complies with point 5.1 of Annex IX to Commission Delegated Regulation (EU) 2015/208: yes/no (⁴).

18.9.2. Alternatively to entry 18.9.1, requirements under ISO 5721-2:2014 (Agricultural tractors — Requirements, test procedures and acceptance criteria for the operators field of vision — Part 2: Field of vision to the side and to the rear) are met with relevant documentation included in the information document: yes/no (⁴).

19. DEVICES FOR INDIRECT VISION OTHER THAN MIRRORS (OPTIONAL)

19.1. Type and characteristics (such as a complete description of the device): …

19.2. In the case of a camera-monitor device, the detection distance (mm), contrast, luminance range, glare correction, display performance (black and white/colour (⁴)), image repetition frequency, luminance reach of the monitor (⁴): …

19.3. Sufficiently detailed drawings to identify the complete device, including installation instructions: …

19.4. Requirements under ISO 5721-2:2014 (Agricultural tractors — Requirements, test procedures and acceptance criteria for the operators field of vision — Part 2: Field of vision to the side and to the rear) are met with relevant documentation included in the information document: yes/no (⁴)

Appendix 9

Model information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) an installation of a crawler undercarriage system

A. GENERAL INFORMATION

2. GENERAL INFORMATION CONCERNING SYSTEMS, COMPONENTS OR SEPARATE TECHNICAL UNITS

2.1. Make(s) (trade name(s) of manufacturer): …

2.2. Type (⁶): …

2.2.1. Commercial name(s) (if available): …

2.2.2. Type-approval number(s) (⁴⁹) (if available): …

2.2.3. Type-approval(s) issued on (date, if available): …

2.2.4. For components and separate technical units, location and method of attachment of the type-approval mark(s) (if available) (¹⁹): …

2.3. Company name and address of manufacturer: …

2.3.1. Name(s) and address(es) of assembly/manufacture plants: …

2.3.2. Name and address of manufacturer's authorised representative (if any): …

2.4. For systems and separate technical units, vehicle(s) for which they are intended for (²¹):

2.4.1. Type (¹⁷): …

2.4.2. Variant(s) (¹⁷): …

2.4.3. Version(s) (¹⁷): …

2.4.4. Commercial name(s) (if available): …

2.4.5. Category, subcategory and speed index of the vehicle (²): …

3. GENERAL CONSTRUCTION CHARACTERISTICS

3.1. Photographs or drawings of a representative version of the vehicle: …

3.2. Scale and dimensioned drawing of the whole vehicle: …

3.3. Axles and wheels:

3.3.1. Number of axles and wheels: …

3.3.2. Number and position of axles with twinned wheels (²³): …

3.3.3. Number and position of steered axles (²³): …

3.3.4. Number and position of powered axles (²³): …

3.3.5. Number and position of braked axles (²³): …

3.4. For C-category vehicles

3.4.1. Crawler undercarriage configuration: set of track trains at front/set of track trains at rear/set of track trains at front and set of track trains at rear/continuous track train at each side of the vehicle (⁴)

3.4.2. Number and position of powered set of track trains (²²): …

3.4.3. Number and position of braked set of track trains (²²): …

3.4.4. Steering for C-category vehicles

3.4.4.1. Steering by changing the speed between the left-hand side and right-hand side track trains: yes/no/not applicable (⁴)

3.4.4.2. Steering by pivoting of two opposite or all four track trains: yes/no/not applicable (⁴)

3.4.4.3. Steering by articulation of the front and rear part of the vehicle around a central vertical axis: yes/no/not applicable (⁴)

3.4.4.4. Steering by articulation of the front and rear part of the vehicle around a central vertical axis and by changing the direction of the wheels on the wheeled axle: yes/no/not applicable (⁴)

3.5. Chassis

3.5.1. Chassis overall drawing: …

3.5.2. Type of chassis for categories T and C: backbone/central tube/ladder/articulated/chassis with side members/other (⁴) (if other: specify: …)

4. MASSES AND DIMENSIONS

(in kg and mm) (Refer to drawings where applicable)

4.1 Range of vehicle mass (overall)

4.1.1. Unladen mass

4.1.1.1. Unladen mass(es) in running order (¹³):

4.1.1.1.1. Maximum: … kg (³⁰)

4.1.1.1.2. Minimum: … kg (³⁰)

4.1.1.1.3. Distribution of this (these) mass(es) among the axles: … kg

4.1.1.1.4. In the case of a rigid drawbar or centre-axle R- or S-category vehicle indicate the vertical load on the coupling point (S): … kg

4.1.2. Maximum mass(es), as declared by the manufacturer

4.1.2.1. Technically permissible maximum laden mass(es) of the vehicle (¹³): … kg

4.1.2.1.1 Technically permissible maximum mass(es) per axle: Axle 1 … kg Axle 2 … kg Axle …:… kg

4.1.2.1.2. In the case of a rigid drawbar or centre-axle R- or S-category vehicle indicate the vertical load on the front coupling point (S): … kg

4.1.2.1.3. Limits on the distribution of this (these) mass(es) among the axles (specify the minimum limits in percentages on the front axle and on the rear axle): … %

4.1.2.3. Mass(es) and crawler undercarriage

Set of track trains No	Track dimensions	Track dimensions	Average contact pressure on the ground [kPa]	Maximum load per track roller [kg] [^E0028]	Maximum permissible mass per set of track trains [kg] [^E0028]	Maximum permissible mass of the vehicle [kg] [^E0028]	Maximum permissible vertical load on the coupling point [kg] [^E0028] [^E0029]
Set of track trains No	length [mm]	width [mm]	Average contact pressure on the ground [kPa]	Maximum load per track roller [kg] [^E0028]	Maximum permissible mass per set of track trains [kg] [^E0028]	Maximum permissible mass of the vehicle [kg] [^E0028]	Maximum permissible vertical load on the coupling point [kg] [^E0028] [^E0029]
1	…		…	…	…	…	…
2	…		…	…	…	…	…
…	…		…	…	…	…	…

according to the track roller specification.

Load transmitted to the reference centre of the coupling under static conditions, irrespective to the coupling device; if the maximum permissible vertical load on the coupling point depending on the coupling is indicated in this table, expand the table at the right side and indicate the identification of the coupling device in the header of the column.

4.1.3. Technically permissible towable mass(es) for T- or C-category vehicles for each chassis/ braking configuration of the R- or S-category vehicle (for R- and S-category vehicles, indicate the maximum permissible load(s) on the rear coupling point):

R- and S category vehicle Brake	Drawbar	Rigid drawbar	Centre-axle
Unbraked [^E0030]	… kg	… kg	… kg
Inertia-braked	… kg	… kg	… kg
Hydraulic braked	… kg	… kg	… kg
Pneumatic braked	… kg	… kg	… kg

Calculated using the partially laden condition defined by the tractor manufacturer in agreement with the technical service set out in point 3.1.1.2 of Annex II to Commission Delegated Regulation (EU) 2015/68.

4.1.4. Total technically permissible mass(es) of the tractor (T- or C-category vehicle) and towed vehicle (R- or S-category vehicle) combination for each chassis/braking configuration of the R- or S-category vehicle:

R- and S category vehicle Brake	Drawbar	Rigid drawbar	Centre-axle
Unbraked	… kg	… kg	… kg
Inertia-braked	… kg	… kg	… kg
Hydraulic braked	… kg	… kg	… kg
Pneumatic braked	… kg	… kg	… kg

37. CRAWLER UNDERCARRIAGE

(provide also entry 4.1.2.3)

37.1. Photographs and dimensioned drawings of the arrangement of the crawler undercarriage and its installation on the vehicle (including the elements inside of track belts to ensure that the track belt is guided over the rollers and the track pattern in the outside): …

37.2. Type of material in contact with the surface: rubber tracks/steel tracks/rubber pads on the track shoes (⁴)

37.3. Metallic tracks

37.3.1. Number of track rollers directly transferring load onto the road surface (NR): …

37.3.2. Outer surface area of each pad (AP): … mm²

37.4. Rubber tracks

37.4.1. Total surface area of rubber lugs in contact with the road (AL): … mm²

37.4.2. Percentage of lug area versus the total surface of the belt: … %

Appendix 10

Model information document relating to EU type-approval of electro-magnetic compatibility of electrical/electronic sub-assemblies as a component/STU

A. GENERAL INFORMATION

2. GENERAL INFORMATION CONCERNING SYSTEMS, COMPONENTS OR SEPARATE TECHNICAL UNITS

2.1. Make(s) (trade name(s) of manufacturer): …

2.2. Type (⁶): …

2.2.1. Commercial name(s) (if available): …

2.2.2. Type-approval number(s) (⁴⁹) (if available): …

2.2.3. Type-approval(s) issued on (date, if available): …

2.2.4. For components and separate technical units, location and method of attachment of the type-approval mark(s) (if available) (¹⁹):…

2.3. Company name and address of manufacturer: …

2.3.1. Name(s) and address(es) of assembly/manufacture plants: …

2.3.2. Name and address of manufacturer's authorised representative (if any): …

2.4. For systems and separate technical units, vehicle(s) for which they are intended for (²¹):

2.4.1. Type (¹⁷): …

2.4.2. Variant(s) (¹⁷): …

2.4.3. Version(s) (¹⁷): …

2.4.4. Commercial name(s) (if available): …

2.4.5. Category, subcategory and speed index of the vehicle (²): …

24. ELECTRO-MAGNETIC COMPATIBILITY (EMC)

24.1. Schedule describing all projected combinations of relevant vehicle electrical/electronic systems or ESAs, body styles (⁶⁰), variations in body material, general wiring arrangements, engine variations, left-hand/right-hand drive versions and wheelbase versions:…

24.2. Requirements under UNECE Regulation No 10 (OJ L 254, 20.9.2012, p. 1) are met with the relevant documentation included in the information document: yes/no (⁴)

24.3. Requirements under ISO 14982:1998 (Agricultural and forestry machinery — Electromagnetic compatibility — Test methods and acceptance criteria) are met with relevant documentation included in the information document: yes/no (⁴)

24.4. Alternatively to entry 24.2 or entry 24.3, provide the following information:

24.4.1. Description and drawings/photographs of the shapes and constituent materials of the part of the body forming the engine compartment and adjacent parts of the passenger compartment: …

24.4.2. Drawings or photographs of the position of the metal components housed in the engine compartment (e.g. heating appliances, spare wheel, air filter, steering mechanism, etc.): …

24.4.3. Table or drawing of radio-interference control equipment: …

24.4.4. Particulars of the nominal value of the direct-current resistance, and, in the case of resistive ignition cables, of their nominal resistance per metre: …

Appendix 11

Model information document relating to EU type-approval of ballast masses as a component/STU

A. GENERAL INFORMATION

2. GENERAL INFORMATION CONCERNING SYSTEMS, COMPONENTS OR SEPARATE TECHNICAL UNITS

2.1. Make(s) (trade name(s) of manufacturer): …

2.2. Type (⁶): …

2.2.1. Commercial name(s) (if available): …

2.2.2. Type-approval number(s) (⁴⁹) (if available): …

2.2.3. Type-approval(s) issued on (date, if available): …

2.2.4. For components and separate technical units, location and method of attachment of the type-approval mark(s) (if available) (¹⁹): …

2.3. Company name and address of manufacturer: …

2.3.1. Name(s) and address(es) of assembly/manufacture plants: …

2.3.2. Name and address of manufacturer's authorised representative (if any): …

2.4. For systems and separate technical units, vehicle(s) for which they are intended for (²¹):

2.4.1. Type (¹⁷): …

2.4.2. Variant(s) (¹⁷): …

2.4.3. Version(s) (¹⁷): …

2.4.4. Commercial name(s) (if available): …

2.4.5. Category, subcategory and speed index of the vehicle (²): …

29. BALLAST MASSES

29.1.Detailed technical description (including photographs or drawings with dimensions) of the ballast masses and how they are mounted on the tractor:

29.2.Number of sets of ballast masses: …

29.2.1.Number of components on each set: Set 1: … Set 2:… Set …:…

29.3.Mass of the components on each set: Set 1: ….kg Set 2: …kg Set … kg

29.3.1.Total mass of each set: Set 1: …kg … Set 2: … kg Set … kg

29.4.Total mass of ballast masses: …kg

29.4.1.Distribution of these masses among the axles: … kg

29.5.Material(s) and method of construction: …

Appendix 12

Model information document relating to EU type-approval of a lateral and/or rear protective structure as a component/STU

A. GENERAL INFORMATION

2. GENERAL INFORMATION CONCERNING SYSTEMS, COMPONENTS OR SEPARATE TECHNICAL UNITS

2.1. Make(s) (trade name(s) of manufacturer): …

2.2. Type (⁶): …

2.2.1. Commercial name(s) (if available): …

2.2.2. Type-approval number(s) (⁴⁹) (if available): …

2.2.3. Type-approval(s) issued on (date, if available): …

2.2.4. For components and separate technical units, location and method of attachment of the type-approval mark(s) (if available) (¹⁹): …

2.3. Company name and address of manufacturer: …

2.3.1. Name(s) and address(es) of assembly/manufacture plants: …

2.3.2. Name and address of manufacturer's authorised representative (if any): …

2.4. For systems and separate technical units, vehicle(s) for which they are intended for (²¹):

2.4.1. Type (¹⁷): …

2.4.2. Variant(s) (¹⁷): …

2.4.3. Version(s) (¹⁷): …

2.4.4. Commercial name(s) (if available): …

2.4.5. Category, subcategory and speed index of the vehicle (²): …

32. LATERAL AND REAR PROTECTION

32.1. Lateral protection

32.1.5. In the case of lateral protection device(s), full description and/or drawing of such device(s) (including mountings and fittings): …

32.1.5.1. Materials used: …

32.1.5.2. Complete details of fittings required and full instructions, including torque requirements, for fitting: …

32.1.6. Requirements under points 2 and 3 and Parts I, II and III of UNECE Regulation No 73 (OJ L 122, 8.5.2012, p. 1) are met with relevant documentation included in the information document: yes/no (⁴)

32.2. Rear protective structure

32.2.4. In case of a special device, full description and/or drawing of the rear protective structure (including mountings and fittings), or, if approved as separate technical unit, type-approval number: …

32.2.4.1. Materials used: …

32.2.4.2. Complete details of fittings required and full instructions, including torque requirements, for fitting: …

Appendix 13

Model information document relating to EU type-approval of a tyre as a component

A. GENERAL INFORMATION

2. GENERAL INFORMATION CONCERNING SYSTEMS, COMPONENTS OR SEPARATE TECHNICAL UNITS

2.1. Make(s) (trade name(s) of manufacturer): …

2.2. Type (⁶): …

2.2.1. Commercial name(s) (if available): …

2.2.2. Type-approval number(s) (⁴⁹) (if available): …

2.2.3. Type-approval(s) issued on (date, if available): …

2.2.4. For components and separate technical units, location and method of attachment of the type-approval mark(s) (if available) (¹⁹): …

2.3. Company name and address of manufacturer: …

2.3.1. Name(s) and address(es) of assembly/manufacture plants: …

2.3.2. Name and address of manufacturer's authorised representative (if any): …

35. TYRES

35.8. Tyre size designation: …

35.9. Type of vehicle(s) for which is intended for: tractor (T- and C-category vehicles)/trailer (R-category vehicles)/interchangeable towed equipment (S-category vehicles) (⁴)

35.10. Tyre construction: diagonal (bias-ply)/bias belted/radial for construction applications (⁴)

35.11. Photographs and drawing of the mould's sidewall: …

35.12. Load capacity index and speed category symbol …

35.12.1. For T- and C-category vehicles: …

35.12.2. For R-category vehicles: …

35.12.3. For S-category vehicles: …

35.13. Rolling resistance in accordance with ISO 28580:2009 (Passenger car, truck and bus tyres — Methods of measuring rolling resistance — Single point test and correlation of measurement results) (where applicable): …

35.14. Service for which is intended: drive wheel/free rolling wheel/both (⁴)

35.15. Tyre designed for use without an inner tube (tubeless): yes/no (⁴)

35.16. Inflation pressure for bead seating during tyre mounting less than: … kPa.

Appendix 14

Model information document relating to EU type-approval of a mechanical coupling as a component/STU

A. GENERAL INFORMATION

2. GENERAL INFORMATION CONCERNING SYSTEMS, COMPONENTS OR SEPARATE TECHNICAL UNITS

2.1. Make(s) (trade name(s) of manufacturer): …

2.2. Type (⁶): …

2.2.1. Commercial name(s) (if available): …

2.2.2. Type-approval number(s) (⁴⁹) (if available): …

2.2.3. Type-approval(s) issued on (date, if available): …

2.2.4. For components and separate technical units, location and method of attachment of the type-approval mark(s) (if available) (¹⁹): …

2.3. Company name and address of manufacturer: …

2.3.1. Name(s) and address(es) of assembly/manufacture plants: …

2.3.2. Name and address of manufacturer's authorised representative (if any): …

2.4. For systems and separate technical units, vehicle(s) for which they are intended for (²¹):

2.4.1. Type (¹⁷): …

2.4.2. Variant(s) (¹⁷): …

2.4.3. Version(s) (¹⁷): …

2.4.4. Commercial name(s) (if available): …

2.4.5. Category, subcategory and speed index of the vehicle (²): …

38. MECHANICAL COUPLINGS

38.1. Photographs and dimensional drawings of the mechanical coupling, its installation on the vehicle and its coupling with the device installed on the towed vehicle: …

38.1.1. Rear mechanical coupling: yes/no (⁴)

38.1.2. Front coupling device (for R- and S-category vehicles): yes/no (⁴)

38.2. Short technical description of the mechanical coupling specifying the type of construction and the material used

38.5. Description of the mechanical coupling:


Type (according to Appendix 1 of Annex XXXIV to Commission Delegated Regulation (EU) 2015/208):	…
Make:	…
Manufacturer’s type designation:	…
Maximum horizontal load/D-Value (⁴) (⁴⁴):	… kg/kN (⁴)
Towable mass (T) (⁴) (⁴⁴):	… tonnes
Maximum permissible vertical load on the coupling point (S) (⁴⁴):	… kg
Photographs and scale drawings of the coupling device. These drawings shall in particular show the required dimensions in detail as well as the measurements for mounting the device.
Short technical description of the coupling device specifying the type of construction and the material used.
Type of Test	Static/Dynamic (⁴)
(EU) type-approval mark or -number of — drawbar eyes, coupling heads or similar coupling devices that shall be attached to the mechanical coupling (in the case of hinged or rigid drawbars) — type-approval mark or –number of mechanical couplings that shall be attached to the ladder frame /trailer hitch support (if restricted to certain types):’;	…

38.6. Component type-approval for a mechanical coupling granted under UNECE Regulation No 55 (OJ L 227, 28.8.2010, p. 1), with relevant documentation included in the information document: yes/no/not applicable (⁴)

Appendix 15

Model information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) a braking system

A. GENERAL INFORMATION

2. GENERAL INFORMATION CONCERNING SYSTEMS, COMPONENTS OR SEPARATE TECHNICAL UNITS

2.1. Make(s) (trade name(s) of manufacturer): …

2.2. Type (⁶): …

2.2.1. Commercial name(s) (if available): …

2.2.2. Type-approval number(s) (⁴⁹) (if available): …

2.2.3. Type-approval(s) issued on (date, if available): …

2.2.4. For components and separate technical units, location and method of attachment of the type-approval mark(s) (if available) (¹⁹): …

2.3. Company name and address of manufacturer: …

2.3.1. Name(s) and address(es) of assembly/manufacture plants: …

2.3.2. Name and address of manufacturer's authorised representative (if any): …

2.4. For systems and separate technical units, vehicle(s) for which they are intended for (²¹):

2.4.1. Type (¹⁷): …

2.4.2. Variant(s) (¹⁷): …

2.4.3. Version(s) (¹⁷): …

2.4.4. Commercial name(s) (if available): …

2.4.5. Category, subcategory and speed index of the vehicle (²): …

3. GENERAL CONSTRUCTION CHARACTERISTICS

3.1. Photographs or drawings of a representative version of the vehicle: …

3.2. Scale and dimensioned drawing of the whole vehicle: …

3.3. Axles and wheels:

3.3.1. Number of axles and wheels: …

3.3.2. Number and position of axles with twinned wheels (²³): …

3.3.3. Number and position of steered axles (²³): …

3.3.4. Number and position of powered axles (²³): …

3.3.5. Number and position of braked axles (²³): …

3.4. For C-category vehicles

3.4.1. Crawler undercarriage configuration: set of track trains at front/set of track trains at rear/set of track trains at front and set of track trains at rear/continuous track train at each side of the vehicle (⁴)

3.4.2. Number and position of powered set of track trains (²²): …

3.4.3. Number and position of braked set of track trains (²²): …

3.4.4. Steering for C-category vehicles

3.4.4.1. Steering by changing the speed between the left-hand side and right-hand side track trains: yes/no/not applicable (⁴)

3.4.4.2. Steering by pivoting of two opposite or all four track trains: yes/no/not applicable (⁴)

3.4.4.3. Steering by articulation of the front and rear part of the vehicle around a central vertical axis: yes/no/not applicable (⁴)

3.4.4.4. Steering by articulation of the front and rear part of the vehicle around a central vertical axis and by changing the direction of the wheels on the wheeled axle: yes/no/not applicable (⁴)

3.5. Chassis

3.5.1. Chassis overall drawing: …

3.5.2. Type of chassis for categories T and C: backbone/central tube/ladder/articulated/chassis with side members/other (⁴) (if other: specify: …)

3.5.3. Type of chassis for categories R and S: drawbar/rigid drawbar/centre-axle/other (⁴) (if other: specify: …)

3.12. For R- and S-category vehicles, type of braking: unbraked/inertia-braked/continuous braked/semi-continuous braked/hydraulic braked/pneumatic braked (⁴)

4. MASSES AND DIMENSIONS

(in kg and mm) (Refer to drawings where applicable)

4.1 Range of vehicle mass (overall)

4.1.1. Unladen mass

4.1.1.1. Unladen mass(es) in running order (¹³):

4.1.1.1.1. Maximum: … kg (³⁰)

4.1.1.1.2. Minimum: … kg (³⁰)

4.1.1.1.3. Distribution of this (these) mass(es) among the axles: … kg

4.1.1.1.4. In the case of a rigid drawbar or centre-axle R- or S-category vehicle indicate the vertical load on the coupling point (S): … kg

4.1.2. Maximum mass(es), as declared by the manufacturer

4.1.2.1. Technically permissible maximum laden mass(es) of the vehicle (¹³): … kg

4.1.2.1.1 Technically permissible maximum mass(es) per axle: Axle 1 … kg Axle 2 … kg Axle …: … kg

4.1.2.1.2. In the case of a rigid drawbar or centre-axle R- or S-category vehicle indicate the vertical load on the front coupling point (S): … kg

4.1.2.1.3. Limits on the distribution of this (these) mass(es) among the axles (specify the minimum limits in percentages on the front axle and on the rear axle): … %

4.1.3. Technically permissible towable mass(es) for T- or C-category vehicles for each chassis/ braking configuration of the R- or S-category vehicle (for R- and S-category vehicles, indicate the maximum permissible load(s) on the rear coupling point):

R- and S category vehicle Brake	Drawbar	Rigid drawbar	Centre-axle
Unbraked [^E0031]	… kg	… kg	… kg
Inertia-braked	… kg	… kg	… kg
Hydraulic braked	… kg	… kg	… kg
Pneumatic braked	… kg	… kg	… kg

4.1.4. Total technically permissible mass(es) of the tractor (T- or C-category vehicle) and towed vehicle (R- or S-category vehicle) combination for each chassis/braking configuration of the R- or S-category vehicle:

R- and S category vehicle Brake	Drawbar	Rigid drawbar	Centre-axle
Unbraked	… kg	… kg	… kg
Inertia-braked	… kg	… kg	… kg
Hydraulic braked	… kg	… kg	… kg
Pneumatic braked	… kg	… kg	… kg

4.2. Range of vehicle dimensions (overall)

4.2.2.5. Wheelbase (³⁷): … mm

4.2.2.6. Distance(s) between consecutive axles 1-2: … mm 2-3: … mm, 3-4: … mm, etc.

4.2.2.7. For rigid draw bar and centre axle R- and S-category vehicles:

4.2.2.7.1. Distance between the coupling point and the first axle: … mm

4.2.2.7.2. Distance between the coupling point and the last axle: … mm

4.2.2.8. Maximum and minimum width of track of each axle (measured between the symmetry planes of the single or twin tyres or of the tyres in triple formation normally fitted) (to be stated by the manufacturer) (³⁸):

4.2.2.8.1. Maximum: Axle 1 … mm Axle 2 … mm Axle …: … mm

4.2.2.8.2. Minimum: Axle 1 … mm Axle 2 … mm Axle …: … mm

4.2.2.9. Position of centre of gravity of the vehicle in the longitudinal, transverse and vertical direction: …

4.2.2.9.1. For T2-, T4.1-, T4.3-categories and C2-, C4.1-, C4.3-categories, height of the centre of gravity, measured in relation to the ground using the tyres normally fitted on the vehicle: … mm

4.2.2.9.1.1. For T2-and C2-categories, indicate the ratio between entry 4.2.2.9.1 and the average minimum track for each axle: Axle 1 … Axle 2 … Axle …: …

4.2.2.9.1.2. For T4.1-and C4.1-categories, indicate the ratio between entry 4.2.2.9.1 and the average minimum track of all of the axles: …

5. GENERAL POWERTRAIN CHARACTERISTICS

5.1. Maximum vehicle speed

5.1.1. Forward maximum vehicle speed

5.1.1.1. Declared maximum design vehicle speed: … km/h

5.1.1.2. Calculated maximum design vehicle speed in top gear (show factors used in calculation) (⁴¹): … km/h

5.1.1.3. Measured maximum vehicle speed: … km/h (⁴¹)

5.1.2. Rearward maximum vehicle speed (⁵⁴)

5.1.2.1. Declared rearward maximum design vehicle speed: … km/h

B. INFORMATION ON ENVIRONMENTAL AND PROPULSION PERFORMANCE

6. ESSENTIAL CHARACTERISTICS OF THE ENGINE

6.1.7. Category and sub-category of the engine (⁷): …

6.2.1. Combustion Cycle: four stroke cycle/two stroke cycle/rotary/other (specify) (⁴): …

6.2.2. Ignition Type: Compression ignition/spark ignition (⁴)

6.2.3.1. Cylinders' number: … and configuration (²⁶):

6.3.2.1. Declared rated speed: … rpm

6.3.2.1.2. Declared rated net power: … kW

6.3.2.2. Maximum power speed: … rpm

6.3.2.2.2. Maximum net power: … kW

6.3.6.4. Engine total swept volume: … cm³

9. ENERGY STORAGE DEVICE(S) (¹¹)

9.1.Description: battery/capacitor/flywheel/generator (⁴)

9.2.Identification number: …

9.3.Kind of electrochemical couple: …

9.4.Energy stored

9.4.1.For battery, voltage: … and capacity: … Ah in 2h

9.4.2.For capacitor: … J

9.4.3.For flywheel/generator(4): … J

9.4.3.1.Flywheel moment of inertia: … kg m²

9.4.3.1.1.Additional moment of inertia if no gear is engaged: … kg m²

9.5.Charger: on-board/external/without (⁴)

11. DRIVE-TRAIN AND CONTROL (¹³)

11.1. Brief description and schematic drawing of the vehicle drive-train and its control system (transmission ratio change system, clutch control or any other element of drive-train): …

11.2. Transmission

11.2.1. Brief description and schematic drawing of transmission ratio change system(s) and its control: …

11.2.2. Diagram and or drawing of the power transmission: …

11.2.3. Type of power transmission: Gear (including planetary gear sets) / belt / hydrostatic / electric / other (⁴) (if other, specify: …)

11.2.4.Brief description of the electrical/electronic components (if any): …

11.2.5.Location relative to the engine: …

11.2.6.Method of control: …

11.2.7.Transfer box: with/without (⁴)

11.2.8.Type of transmission ratio change system: Mechanical (gear change) / Double clutch (gear change) / Semi-automatic (gear change) / Automatic (gear change) / Continuously Variable Transmission/ hydrostatic / not applicable / other (⁴) (if other, specify: …)

11.3. Clutch (if any)

11.3.1.Brief description and schematic drawing of the clutch and its control system:

11.3.2.Maximum torque conversion: …

11.4. Gear ratios

Gear	Internal gearbox ratios (ratios of engine to gearbox output shaft revolutions)	Internal transfer box ratios (ratios of engine to transfer box output shaft revolutions)	Final drive ratio(s) (ratio of gearbox output shaft to driven wheel revolutions)	Total gear ratios	Ratio (engine speed/vehicle speed) for manual transmission only
Maximum for CVT [^E0032] 1 2 3
Minimum for CVT [^E0032] Reverse 1 …

Continuously variable transmission

11.5. Differential lock

11.5.1.Differential lock: yes/no/optional (⁴)

41. SUSPENSION

41.1. Brief description and schematic drawing of suspension and its control system for of each axle or group of axles or wheel: …

41.2. Drawing of the suspension arrangements: …

41.3. Level adjustment: yes/no/optional (⁴)

41.4. Brief description of the electrical/electronic components: …

41.5. Air-suspension for driving axle(s): yes/no (⁴)

41.5.1. Suspension of driving axle(s) equivalent to air-suspension: yes/no (⁴)

41.5.2. Frequency and damping of the oscillation of the sprung mass: …

41.6. Air-suspension for non-driving axle(s): yes/no (⁴)

41.6.1. Suspension of non-driving axle(s) equivalent to air-suspension: yes/no (⁴)

41.6.2. Frequency and damping of the oscillation of the sprung mass: …

41.7. Characteristics of the springing parts of the suspension (design, characteristics of the materials and dimensions): …

41.8. Vehicle equipped with hydro-pneumatic/hydraulic/pneumatic (⁴) suspension

41.9. Stabilisers: yes/no/optional (⁴)

41.10. Shock absorbers: yes/no/optional (⁴)

41.11. Other devices (if any): …

42. AXLE(S) AND TYRES

42.1. Description (including photographs and drawings) of the axle(s): …

42.2. Material(s) and method of construction: …

42.3. Make (where appropriate): …

42.4. Type (where appropriate): …

42.5. Maximum permissible mass supported by the axle(s): … kg

42.6. Axle(s) dimensions:

42.6.1. Length: … mm

42.6.2. Width: … mm

42.7. Braking connection to the axle(s): axial/radial/integrated/other (⁴) (if other, specify: …)

42.8. Dimensions of the largest permissible tyres on braked axles: …

42.8.1. Nominal rolling circumference of the largest tyres on braked axles: …

42.8.2. Dimensions of the largest permissible tyres on powered axles: …

42.8.3. Nominal rolling circumference of the of the largest tyres on powered axles: …

43. BRAKING

43.1. Brief description of the braking system(s) installed on the vehicle (⁵⁵): …

43.2.Specifications of the vehicle with respect to the control circuits of the pneumatic, hydraulic and/or electric control lines of the braking system(s) and a list of the supported messages and parameters: …

43.4. Braking system(s)

43.4.1. Description of the braking system(s) operation (including any electronic parts), electric block diagram, hydraulic or pneumatic circuit plan (⁵⁵): …

43.4.2 Schematic drawing and operating sketch of the braking system(s) (⁵⁵): …

43.4.3. List of braking-system components, properly identified (⁵⁵): …

43.4.4. Technical explanation on the calculation for the braking system(s) (determination of the ratio of the total braking forces at the circumference of the wheels to the force applied to the braking control) (⁵⁵): …

43.4.5. External energy source(s) (if any) (characteristics, capacity of energy reservoirs, maximum and minimum pressure, pressure gauge and minimum-pressure warning device on the dashboard, vacuum reservoirs and supply valve, supply compressors, compliance with provisions regarding pressure equipment) (⁵⁵): …

43.4.6. Electronic braking system: yes/no/optional (⁴)

43.4.7. Type-I test report number(s), in accordance with Annex VII to Commission Delegated Regulation (EU) 2015/68 (if applicable): …

43.5. Braking transmission (on towing vehicle)

43.5.1. Braking transmission of the service braking system on towing vehicle: mechanical/pneumatic/hydraulic/hydrostatic/without power assistance/power-assisted/fully powered transmission (⁴)

43.5.2. Transmission technology: pneumatic/hydraulic/both pneumatic and hydraulic (⁴)

43.5.3. Locking of left and right braking controls: yes/no (⁴)

43.6. Towed vehicle braking control devices (on towing vehicle)

43.6.1.Towed vehicle braking control system technology: Hydraulic / Pneumatic / Electric/None (⁴)

43.6.2. Description of the connectors, couplings and safety devices (including drawings, sketches and the identification of any electronic parts): …

43.6.2.1. Pneumatic connection type: Two lines/None (⁴)

43.6.2.1.1. Pneumatic supply pressure (two lines): … kPa

43.6.2.1.2. Electrical control line: yes/no (⁴)

43.6.2.2. Hydraulic connection type: Single line / Two lines / None (⁴)

43.6.2.2.1. Hydraulic supply pressure: Single line: … kPa Two lines: … kPa

43.6.2.2.2. Presence of ISO 7638:2003 connector (¹⁵): yes/no (⁴)

43.7. Towed vehicle braking devices (on towed vehicle)

43.7.1. Towed vehicle braking control system technology: Hydraulic / Pneumatic / Electric/ Inertia / None (⁴)

43.7.2. Towed vehicle-brake actuating device: Drum / Disc / Other (⁴)

43.7.2.1. Description and characteristics: …

43.7.3. Description of the connectors, couplings and safety devices (including drawings, sketches and the identification of any electronic parts): …

43.7.3.1. Pneumatic connection type: Two lines/None (⁴)

43.7.3.1.1. Electrical control line: yes/no (⁴)

43.7.3.2. Hydraulic connection type: Two lines / None (⁴)

43.7.3.2.1. Presence of ISO 7638:2003 connector (¹⁵): yes/no (⁴)

43.A TOWED VEHICLE AXLE AND BRAKE INFORMATION DOCUMENT WITH RESPECT TO THE ALTERNATIVE TYPE I AND TYPE III PROCEDURE

43.A.1.General

43.A.1.1.Name and address of axle or vehicle manufacturer:

43.A.2.Axle data

43.A.2.1.Manufacturer (name and address): …

43.A.2.2.Type/variant: …

43.A.2.3.Axle identifier: ID1- …

43.A.2.4.Test axle load (Fe): … daN

43.A.2.5.Wheel and brake data according to the following figures 1A and 1B

43.A.3.Brake

43.A.3.1.General information

43.A.3.1.1.Make:

43.A.3.1.2.Manufacturer (name and address):

43.A.3.1.3.Type of brake (e.g. drum / disc):

43.A.3.1.3.1.Variant (e.g. S-cam, single wedge etc.):

43.A.3.1.4.Brake identifier: ID2-

43.A.3.1.5.Brake data according to the figures 2A and 2B:

43.A.3.2.Drum brake data

43.A.3.2.1.Brake adjustment device (external/integrated): …

43.A.3.2.2.Declared maximum brake input torque Cmax: … Nm

43.A.3.2.3.Mechanical efficiency: η =…

43.A.3.2.4.Declared brake input threshold torque C0,dec: … Nm

43.A.3.2.5.Effective length of the cam shaft: … mm

43.A.3.3.Brake drum

43.A.3.3.1.Max diameter of friction surface (wear limit) … mm

43.A.3.3.2.Base material: …

43.A.3.3.3.Declared mass: … kg

43.A.3.3.4.Nominal mass: … kg

43.A.3.4.Brake lining

43.A.3.4.1.Manufacturer and address …

43.A.3.4.2.Make …

43.A.3.4.3.Type …

43.A.3.4.4.Identification (type identification on lining) …

43.A.3.4.5.Minimum thickness (wear limit) … mm

43.A.3.4.6.Method of attaching friction material to brake shoe: …

43.A.3.4.6.1.… Worst case of attachment (in the case of more than one):

43.A.3.5.Disc brake data

43.A.3.5.1.Connection type to the axle (axial, radial, integrated, etc.): …

43.A.3.5.2.Brake adjustment device (external/integrated): …

43.A.3.5.3.Max. actuation stroke: … mm

43.A.3.5.4.Declared maximum input force ThAmax: … daN

43.A.3.5.4.1Cmax = ThAmax · le : … Nm

43.A.3.5.5.Friction radius: re = … mm

43.A.3.5.6.Lever length: le = … mm

43.A.3.5.7.Input/output ratio (le/ee): i = …

43.A.3.5.8.Mechanical efficiency: η = …

43.A.3.5.9.Declared brake input threshold force ThA0,dec: … N

43.A.3.5.9.1.C0,dec = ThA0,dec · le : … Nm

43.A.3.5.10.Minimum rotor thickness (wear limit): … mm

43.A.3.6.Brake disc data …

43.A.3.6.1.Disc type description: …

43.A.3.6.2.Connection/mounting to the hub: …

43.A.3.6.3.Ventilation (yes/no): …

43.A.3.6.4.Declared mass: … kg

43.A.3.6.5.Nominal mass: … kg

43.A.3.6.6.Declared external diameter: … mm

43.A.3.6.7.Minimum external diameter: … mm

43.A.3.6.8.Inner diameter of friction ring: … mm

43.A.3.6.9.Width of ventilation channel (if appl.): … mm

43.A.3.6.10.Base material: …

43.A.3.7.Brake pad data …

43.A.3.7.1.Manufacturer and address: …

43.A.3.7.2.Make:

43.A.3.7.3.Type: …

43.A.3.7.4.Identification (type identification on pad back plate): …

43.A.3.7.5.Minimum thickness (wear limit): … mm

43.A.3.7.6.Method of attaching friction material to pad back plate: …

43.A.3.7.6.1.Worst case of attachment (in the case of more than one): …

xe (mm)	ae (mm)	he (mm)	ce (mm)	de (mm)	ee (mm)	α0e	α1e	be (mm)	re (mm)	Ae (cm2)	S1e (mm)	S2e (mm)	S3e (mm)

Appendix 16

Model information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) a driver's exposure to noise level system

A. GENERAL INFORMATION

2. GENERAL INFORMATION CONCERNING SYSTEMS, COMPONENTS OR SEPARATE TECHNICAL UNITS

2.1. Make(s) (trade name(s) of manufacturer): …

2.2. Type (⁶): …

2.2.1. Commercial name(s) (if available): …

2.2.2. Type-approval number(s) (⁴⁹) (if available): …

2.2.3. Type-approval(s) issued on (date, if available): …

2.3. Company name and address of manufacturer: …

2.3.1. Name(s) and address(es) of assembly/manufacture plants: …

2.3.2. Name and address of manufacturer's authorised representative (if any): …

2.4. For systems and separate technical units, vehicle(s) for which they are intended for (²¹):

2.4.1. Type (¹⁷): …

2.4.2. Variant(s) (¹⁷): …

2.4.3. Version(s) (¹⁷): …

2.4.4. Commercial name(s) (if available): …

2.4.5. Category, subcategory and speed index of the vehicle (²): …

2.5. Location and method of attachment of the type-approval mark (¹⁹): …

6. ESSENTIAL CHARACTERISTICS OF THE ENGINE

6.1.7. Category and sub-category of the engine (⁷): …

6.2.1. Combustion Cycle: four stroke cycle/two stroke cycle/rotary/other (specify) (⁴): …

6.2.2. Ignition Type: Compression ignition/spark ignition (⁴)

6.2.3.1. Cylinders' number: … and configuration (²⁶):

6.3.2.1. Declared rated speed: … rpm

6.3.2.1.2. Declared rated net power: … kW

6.3.2.2. Maximum power speed: … rpm

6.3.2.2.2. Maximum net power: … kW

6.3.6.4. Engine total swept volume: … cm³

11. DRIVE-TRAIN AND CONTROL (¹³)

11.1. Brief description and schematic drawing of the vehicle drive-train and its control system (transmission ratio change system, clutch control or any other element of drive-train): …

11.2. Transmission

11.2.1. Brief description and schematic drawing of transmission ratio change system(s) and its control: …

11.2.2. Diagram and or drawing of the power transmission: …

11.2.3. Type of power transmission: Gear (including planetary gear sets) / belt / hydrostatic / electric / other (⁴) (if other, specify: …)

11.2.4. Brief description of the electrical/electronic components (if any): …

11.2.5. Location relative to the engine: …

11.2.6. Method of control: …

11.2.7. Transfer box: with/without (⁴)

11.2.8. Type of transmission ratio change system: Mechanical (gear change) / Double clutch (gear change) / Semi-automatic (gear change) / Automatic (gear change) / Continuously Variable Transmission/ hydrostatic / not applicable / other (⁴) (if other, specify: …)

11.3. Clutch (if any)

11.3.1. Brief description and schematic drawing of the clutch and its control system:

11.3.2. Maximum torque conversion:

11.4. Gear ratios

Gear	Internal gearbox ratios (ratios of engine to gearbox output shaft revolutions)	Internal transfer box ratios (ratios of engine to transfer box output shaft revolutions)	Final drive ratio(s) (ratio of gearbox output shaft to driven wheel revolutions)	Total gear ratios	Ratio (engine speed/vehicle speed) for manual transmission only
Maximum for CVT [^E0033] 1 2 3 … Minimum for CVT [^E0033] Reverse 1 …

Continuously variable transmission

48. DRIVER'S EXPOSURE TO NOISE LEVEL

48.1. T- or C-category (with rubber tracks) vehicles to be tested in accordance with Test method 1, in accordance with point 2 of Annex XIII to Commission Delegated Regulation (EU) No 1322/2014: yes/no/not applicable (⁴)

48.2. T- or C-category (with rubber tracks) vehicles to be tested in accordance with Test method 2, in accordance with point 3 of Annex XIII to Commission Delegated Regulation (EU) No 1322/2014: yes/no/not applicable (⁴)

48.3. C-category vehicles with steel tracks to be tested on a layer of humid sand as specified by paragraph 5.3.2 of ISO 6395:2008 (Earth-moving machinery — Determination of sound power level — Dynamic test conditions): yes/no/not applicable (⁴)

48.4 Alternatively to entries 48.1 to 48.3, a complete test report issued on the basis of the OECD standard Code for the official measurement of noise at the driving position(s) on agricultural and forestry tractors, OECD Code 5, Edition 2015 of July 2014, is provided with relevant documentation included in the information document: yes/no/not applicable (⁴)

Appendix 17

Model information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) a seat belt anchorages system

A. GENERAL INFORMATION

2. GENERAL INFORMATION CONCERNING SYSTEMS, COMPONENTS OR SEPARATE TECHNICAL UNITS

2.1. Make(s) (trade name(s) of manufacturer): …

2.2. Type (⁶): …

2.2.1. Commercial name(s) (if available): …

2.2.2. Type-approval number(s) (⁴⁹) (if available): …

2.2.3. Type-approval(s) issued on (date, if available): …

2.2.4. For components and separate technical units, location and method of attachment of the type-approval mark(s) (if available) (¹⁹): …

2.3. Company name and address of manufacturer: …

2.3.1. Name(s) and address(es) of assembly/manufacture plants: …

2.3.2. Name and address of manufacturer's authorised representative (if any): …

2.4. For systems and separate technical units, vehicle(s) for which they are intended for (²¹):

2.4.1. Type (¹⁷): …

2.4.2. Variant(s) (¹⁷): …

2.4.3. Version(s) (¹⁷): …

2.4.4. Commercial name(s) (if available): …

2.4.5. Category, subcategory and speed index of the vehicle (²): …

46. ROLL-OVER PROTECTIVE STRUCTURE (ROPS)

46.1. Equipment of ROPS: compulsory/optional/standard (⁴)

49. SEATING POSITIONS (SADDLES AND SEATS)

49.1. Seating position configuration: seat/saddle (⁴)

49.2. Coordinates or drawing of the Seat Reference point (S) of all seating positions: …

49.3. Description and drawings of:

49.3.1. The seats and their anchorages: …

49.3.2. The adjustment system: …

49.3.3. The displacement and locking systems: …

49.3.4. The seat-belt anchorages (if incorporated in the seat structure): …

49.3.5. The parts of the vehicle used as anchorages: …

53. SEAT-BELT ANCHORAGES

53.1. Requirements under standard ISO 3776-1:2006 (Tractors and machinery for agriculture — Seat belts — Part 1: Anchorage location requirements) are met with relevant documentation included in the information document: yes/no (⁴)

53.2. Photographs and/or drawings of the bodywork showing the true, effective location and dimensions of the anchorages: …

53.3. Drawings of the anchorages and the parts of the vehicle structure to which they are attached (together with a statement on the nature of the materials used): …

53.4. Designation of the types of belts (¹⁴) authorised for attachment to the anchorages on the vehicle

					Anchorage location	Anchorage location
					Vehicle structure	Seat structure
Driver's seat	Image omitted; see official source	Lower anchorages	Image omitted; see official source	outboard inboard
Driver's seat	Image omitted; see official source	Upper anchorages
Passenger seat 1	Image omitted; see official source	Lower anchorages	Image omitted; see official source	outboard inboard
Passenger seat 1	Image omitted; see official source	Upper anchorages
Passenger seat …	Image omitted; see official source	Lower anchorages	Image omitted; see official source	outboard inboard
Passenger seat …	Image omitted; see official source	Upper anchorages

53.4.1. Observation: …

53.5. Special devices (example: seat-height adjustment, preloading device, etc.): …

53.6. Description of a particular type of safety belt where an anchorage is located in the seat backrest or incorporates an energy dissipating device: …

53.7. Alternative to entries 53.2 to 53.6.

53.7.1. Requirements under standard ISO 3776-2:2013 (Tractors and machinery for agriculture — Seat belts — Part 2: Anchorage strength requirements) on anchorage strength location are met with relevant documentation included in the information document: yes/no/not applicable (⁴)

53.7.2. Test report granted a on the basis of UNECE Regulation No 14 (OJ L 109, 28.4.2011, p. 1) with relevant documentation included in the information document: yes/no/not applicable (⁴)

53.7.3. Complete test report issued on the basis of the OECD standard Code for the official testing of protective structures on agricultural and forestry tractors (dynamic test), OECD Code 3 with seat-belt anchorages tested, Edition 2015 of July 2014, is provided with relevant documentation included in the information document: yes/no/not applicable (⁴)

53.7.4. Complete test report issued on the basis of the OECD standard Code for the official testing of protective structures on agricultural and forestry track-laying tractors, OECD Code 8 with seat-belt anchorages tested, Edition 2015 of July 2014, is provided with relevant documentation included in the information document: yes/no/not applicable (⁴)

53.7.5. Complete test report issued on the basis of the OECD standard Code for the official testing of protective structures on agricultural and forestry tractors (static test), OECD Code 4 with seat-belt anchorages tested, Edition 2015 of July 2014, is provided with relevant documentation included in the information document: yes/no/not applicable (⁴)

53.7.6. Complete test report issued on the basis of the OECD standard Code for the official testing of front mounted roll-over protective structures on narrow-track wheeled agricultural and forestry tractors, OECD Code 6 with seat-belt anchorages tested, Edition 2015 of July 2014, is provided with relevant documentation included in the information document: yes/no/not applicable (⁴)

53.7.7 Complete test report issued on the basis of the OECD standard Code for the official testing of rear mounted roll-over protective structures on narrow-track wheeled agricultural and forestry tractors, OECD Code 7 with seat-belt anchorages tested, Edition 2015 of July 2014, is provided with relevant documentation included in the information document: yes/no/not applicable (⁴)

Appendix 18

Model information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) a protection against hazardous substances system

A. GENERAL INFORMATION

2. GENERAL INFORMATION CONCERNING SYSTEMS, COMPONENTS OR SEPARATE TECHNICAL UNITS

2.1. Make(s) (trade name(s) of manufacturer): …

2.2. Type (⁶): …

2.2.1. Commercial name(s) (if available): …

2.2.2. Type-approval number(s) (⁴⁹) (if available): …

2.2.3. Type-approval(s) issued on (date, if available): …

2.2.4. For components and separate technical units, location and method of attachment of the type-approval mark(s) (if available) (¹⁹): …

2.3. Company name and address of manufacturer: …

2.3.1. Name(s) and address(es) of assembly/manufacture plants: …

2.3.2. Name and address of manufacturer's authorised representative (if any): …

2.4. For systems and separate technical units, vehicle(s) for which they are intended for (²¹):

2.4.1. Type (¹⁷): …

2.4.2. Variant(s) (¹⁷): …

2.4.3. Version(s) (¹⁷): …

2.4.4. Commercial name(s) (if available): …

2.4.5. Category, subcategory and speed index of the vehicle (²): …

Reading this document does not replace reading the official text published in the Official Journal of the European Union. We assume no responsibility for any inaccuracies arising from the conversion of the original to this format.

This text is published under EUR-Lex's own terms of reuse, not a Legalize or public-domain licence. EUR-Lex
Creative Commons Attribution 4.0 International (CC BY 4.0)
© European Union, https://eur-lex.europa.eu — Source: EUR-Lex (Publications Office of the European Union). Reused under the Creative Commons Attribution 4.0 International (CC BY 4.0) licence. Only EU legislation published in the printed Official Journal of the European Union is deemed authentic; consolidated texts are reproduced here for documentation purposes and have been reformatted to Markdown.

11. DRIVE-TRAIN AND CONTROL (13)

Appendix 3

Model information document relating to EU type-approval of an engine/engine family as a component/STU

A. GENERAL INFORMATION

2. GENERAL INFORMATION CONCERNING SYSTEMS, COMPONENTS OR SEPARATE TECHNICAL UNITS

5. GENERAL POWERTRAIN CHARACTERISTICS

B. INFORMATION ON ENVIRONMENTAL AND PROPULSION PERFORMANCE

6. ESSENTIAL CHARACTERISTICS OF THE ENGINE

Appendix 4

Model information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) a driver information system

A. GENERAL INFORMATION

2. GENERAL INFORMATION CONCERNING SYSTEMS, COMPONENTS OR SEPARATE TECHNICAL UNITS

20. DRIVER INFORMATION SYSTEMS

Appendix 5

Model information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) an installation of lighting and light-signalling devices system

A. GENERAL INFORMATION

2. GENERAL INFORMATION CONCERNING SYSTEMS, COMPONENTS OR SEPARATE TECHNICAL UNITS

3. GENERAL CONSTRUCTION CHARACTERISTICS

21. INSTALLATION OF LIGHTING, LIGHT-SIGNALLING DEVICES, INCLUDING AUTOMATIC SWITCHING OF LIGHTING

Appendix 6

Model information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) an electro-magnetic compatibility system

A. GENERAL INFORMATION

2. GENERAL INFORMATION CONCERNING SYSTEMS, COMPONENTS OR SEPARATE TECHNICAL UNITS

24. ELECTRO-MAGNETIC COMPATIBILITY (EMC)

Appendix 7

Model information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) an installation of audible warning device(s) system

A. GENERAL INFORMATION

2. GENERAL INFORMATION CONCERNING SYSTEMS, COMPONENTS OR SEPARATE TECHNICAL UNITS

25. AUDIBLE WARNING DEVICE(S)

Appendix 8

Model information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) the installation of rear-view mirrors as a system

A. GENERAL INFORMATION

2. GENERAL INFORMATION CONCERNING SYSTEMS, COMPONENTS OR SEPARATE TECHNICAL UNITS

18. REAR-VIEW MIRRORS

19. DEVICES FOR INDIRECT VISION OTHER THAN MIRRORS (OPTIONAL)

Appendix 9

Model information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) an installation of a crawler undercarriage system

A. GENERAL INFORMATION

2. GENERAL INFORMATION CONCERNING SYSTEMS, COMPONENTS OR SEPARATE TECHNICAL UNITS

3. GENERAL CONSTRUCTION CHARACTERISTICS

4. MASSES AND DIMENSIONS

4.1 Range of vehicle mass (overall)

37. CRAWLER UNDERCARRIAGE

Appendix 10

Model information document relating to EU type-approval of electro-magnetic compatibility of electrical/electronic sub-assemblies as a component/STU

A. GENERAL INFORMATION

2. GENERAL INFORMATION CONCERNING SYSTEMS, COMPONENTS OR SEPARATE TECHNICAL UNITS

24. ELECTRO-MAGNETIC COMPATIBILITY (EMC)

Appendix 11

Model information document relating to EU type-approval of ballast masses as a component/STU

A. GENERAL INFORMATION

2. GENERAL INFORMATION CONCERNING SYSTEMS, COMPONENTS OR SEPARATE TECHNICAL UNITS

29. BALLAST MASSES

Appendix 12

Model information document relating to EU type-approval of a lateral and/or rear protective structure as a component/STU

A. GENERAL INFORMATION

2. GENERAL INFORMATION CONCERNING SYSTEMS, COMPONENTS OR SEPARATE TECHNICAL UNITS

32. LATERAL AND REAR PROTECTION

32.1. Lateral protection

32.2. Rear protective structure

Appendix 13

Model information document relating to EU type-approval of a tyre as a component

A. GENERAL INFORMATION

2. GENERAL INFORMATION CONCERNING SYSTEMS, COMPONENTS OR SEPARATE TECHNICAL UNITS

35. TYRES

Appendix 14

Model information document relating to EU type-approval of a mechanical coupling as a component/STU

A. GENERAL INFORMATION

2. GENERAL INFORMATION CONCERNING SYSTEMS, COMPONENTS OR SEPARATE TECHNICAL UNITS

38. MECHANICAL COUPLINGS

Appendix 15

Model information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) a braking system

A. GENERAL INFORMATION

2. GENERAL INFORMATION CONCERNING SYSTEMS, COMPONENTS OR SEPARATE TECHNICAL UNITS

3. GENERAL CONSTRUCTION CHARACTERISTICS

4. MASSES AND DIMENSIONS

4.1 Range of vehicle mass (overall)

4.2. Range of vehicle dimensions (overall)

5. GENERAL POWERTRAIN CHARACTERISTICS

5.1. Maximum vehicle speed

11. DRIVE-TRAIN AND CONTROL (¹³)

9. ENERGY STORAGE DEVICE(S) (¹¹)

11. DRIVE-TRAIN AND CONTROL (¹³)

11. DRIVE-TRAIN AND CONTROL (¹³)